Castors, Legs & Glides

Transcription

1 Castors, Legs & Glides

2 The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements. We bear no liability for any misprints or other errors that might occur in the production of the catalogue. IO A/ tager forbehold for trykfejl samt ændringer i produktets specifikationer. Für ruckfehler und Irrtümer ist jede aftung ausgeschlossen. Produktänderungen behalten wir uns vor. IO A/ ILEPARKEN 11 K KOVLUNE (COPENAGEN) ENARK PONE: (+45) FAX: (+45) ITRIBUTOR

3 CONTENT CONTENT 3-4 TWIN WEEL CATOR 5-10 TEA TROLLEY CATOR FORCELLA 11 FORK CATOR W/TOP PLATE & PU WEEL FORK CATOR W/TOP PLATE & ALU WEEL BOX CATOR BRA CATOR BRACELLA 21 FORK CATOR GARA - Ø76 22 FORK CATOR W/TOP PL. & PU TRACK - TEEL INUTRIAL FORK CATOR W/WIVEL TOP PL. 29 COOE TE RIGT CATOR 30 ALU & TEEL LEG TABLE ETAL LEG W/EIGT AJUTER 33 TWITER & INI TWITER TE LEG CONNECTOR TWIT N TURN - TE LEG CONNECTOR 37 3

4 CONTENT RIA TE LEG CONNECTOR F/QUARE LEG AJUTABLE GLIE PANEL OE 50 NAIL-ON GLIE KNOCK-IN GLIE & FELT PA BUPER IC & UCTION PA 55 UCTION PA & TUBE LIE 56 TUBE LIE 57 WAER & PACER 58 INERT GLIE

5 TWIN WEEL CATOR W/TOP PLATE TWIN WEEL CATOR W/TOP PLATE Wheel: Polyamid (PA), black. Top plate: 2 steel, bright zinc plated. Application: Premounted top plate 42 x 42 or 38 x 38. With or without brake. No brake static kg # x x 38 x 2 # x x 42 x 2 # x x 42 x 2 With brake static kg # x x 38 x 2 # x x 42 x 2 # x x 42 x 2 5

6 TWIN WEEL CATOR W/KNOCK-IN OCKET & W/NYLON OCKET TWIN WEEL CATOR W/KNOCK-IN OCKET Wheel: Polyamid (PA), black. Knock-in socket: Polyamid (PA), black. Application: Knock-in socket Ø12 x 12 (Not premounted). Without brake. Ø No brake static kg # TWIN WEEL CATOR W/NYLON OCKET Wheel: Polyamid (PA), black. ocket: Polyamid (PA), black. Application: Knock-in socket Ø10,5 x 30 (not premounted). Knock-in hole depth 33 Without brake. Ø A B 6 No brake static kg A B C # , ,5 # , ,5 C

7 TWIN WEEL CATOR W/TREAE TE TWIN WEEL CATOR W/TREAE TE Wheel: Polyamid (PA), black. Threaded stem: teel, bright zinc plated. Application: Premounted threaded stem in 8 & 10. With or without brake. No brake static kg # # # With brake static kg # # #

8 TWIN WEEL CATOR W/U-BRACKET TWIN WEEL CATOR W/U-BRACKET Wheel: Polyamid (PA), black. U-bracket : teel, black zinc plated. Application: Premounted U-bracket for 16 panel. With 4 x 22 screw. Without or without brake. 40,5 33,5 A B C No brake static kg A B C # ,25 7, ,5 33,5 A B C With brake static kg A B C # ,25 7,5 26 8

9 TWIN WEEL CATOR LECCO W/PU TRACK - Ø 50 TWIN WEEL CATOR LECCO W/PU TRACK - Ø 50 Wheel hood & core: Polyamid (PA), black. Wheel track: Polyurethane (PU), grey. Top plate: 2 steel, bright zinc plated. Application: Premounted top plate 42 x 42. ole distance (c/c.) : 32, Ø5 screw holes. Recoended for hard surface. Without brake. static/dynamic kg # /30 32 x x 42 x 2 9

10 TWIN WEEL CATOR BARI W/PU TRACK - Ø 65 TWIN WEEL CATOR BARI W/PU TRACK - Ø 65 Wheel hood & core: Polypropylene (PP), grey. Wheel track: Polyurethane (PU), black. Top plate: 2 steel, bright zinc plated. Application: Premounted top plate 42 x 42. ole distance (c/c.) : 32, Ø5 screw holes. Recoended for hard surface. With or without brake. static/dynamic kg # /50 32 x x 42 x 2 static/dynamic kg # /50 32 x x 42 x 2 10

11 TEA TROLLEY CATOR FORCELLA TEA TROLLEY CATOR FORCELLA Wheel: teel: Brass (BPL) or nickel Pl. (NPL). Polyamid (PA), black. Application: etal socket Ø7 x 35 with black plastic bushing. Ø FINI static kg A B C # BPL # NPL A C B 11

12 FORK CATOR W/TOP PLATE & TRANPARENT PU WEEL FORK CATOR W/TOP PLATE & TRANPARENT PU WEEL Wheel track: Polyurethane (PU), transparent. Wheel body: Polyurethane (PU), transparent. Top plate: 1,8 steel, zinc plated. Application: With premounted top plate 50 x 50. Recoended for hard surface. With or without plastic brake. No brake static kg # x x 50 x 1,8 # x x 50 x 1,8 # x x 50 x 1,8 With brake static kg 12 # x x 50 x 1,8 # x x 50 x 1,8 # x x 50 x 1,8

13 FORK CATOR W/TOP PLATE & COLORE TRANPARENT PU WEEL Transparent Orange Ø50 Ø75 # # Transparent Orange with brake Ø50 Ø75 # # Transparent Black Ø35 Ø50 Ø75 Transparent Green Ø50 Ø75 # # Transparent Black with brake # Ø35 # Ø50 # Ø75 # # # Transparent Green with brake Ø50 Ø75 # # Transparent Blue Ø50 Ø75 Transparent Blue with brake # Ø50 # Ø75 # #

14 FORK CATOR PIKE Ø50 & Ø75 FORK CATOR PIKE Ø50 & Ø75 Wheel track: Polyurethane (PU), transparent or black Wheel body: Polyurethane (PU), transparent or black Top plate: 1,8 steel, zinc plated. Application: With premounted top plate 50 x 50. Recoended for hard surface. With or without plastic brake. No brake Colour of wheel static kg # Black x x 50 x 1,8 # Transparent x x 50 x 1,8 # Black x x 50 x 1,8 # Transparent x x 50 x 1,8 With brake Colour of wheel static kg # Black x x 50 x 1,8 # Transparent x x 50 x 1,8 # Black x x 50 x 1,8 # Transparent x x 50 x 1,8 14

15 FORK CATOR JAC Ø50 & Ø75 FORK CATOR JAC Ø50 & Ø75 Wheel track: Polyurethane (PU), Black ring Wheel body: Bright Anodized Aluminum Fork: Chrome Pl. teel Fork Top plate: 2 steel, zinc plated. Application: With premounted top plate 42 x 42 or 60 x 60. Recoended for hard surface. With or without plastic brake. No brake Colour of wheel track static kg # Black PU x x 42 x 2 # Black PU x x 60 x 2 With brake Colour of wheel track static kg # Black PU x x 42 x 2 # Black PU x x 60 x 2 15

16 FORK CATOR BOB Ø50 & Ø75 FORK CATOR BOB Ø50 & Ø75 Wheel track: Polyurethane (PU), Black ring Wheel body: att Anodized Aluminum Fork: Alu finish, teel Fork Top plate: 2 steel, zinc plated. Application: With premounted top plate 42 x 42 or 60 x 60. Recoended for hard surface. With or without plastic brake. No brake Colour of wheel track static kg # Black PU x x 42 x 2 # Black PU x x 60 x 2 With brake Colour of wheel track static kg # Black PU x x 42 x 2 # Black PU x x 60 x 2 16

17 FORK CATOR KIKA Ø50 & Ø75 FORK CATOR KIKA Ø50 & Ø75 Wheel track: Polyurethane (PU), Black ring Wheel body: attanodized Aluminum Fork: Alu finish, teel Fork Top plate: 2 steel, zinc plated. Application: With premounted top plate 42 x 42 or 60 x 60. Recoended for hard surface. With or without plastic brake. No brake Colour of wheel track static kg # Black PU x x 42 x 2 # Black PU x x 60 x 2 With brake Colour of wheel track static kg # Black PU x x 42 x 2 # Black PU x x 60 x 2 17

18 BOX CATOR - CREW-ON W/ PP WEEL BOX CATOR - CREW-ON W/ PP WEEL Wheel: Polypropylene (PP), white or black. ounting bracket: teel, bright zinc plated. Application: outing bracket: 19 x 42. ole distance (c/c): 32. Colour of wheel c.c static kg A B A B # White /40 # Black /42 # White /48 18

19 BOX CATOR - W/ PU TRACK BOX CATOR - W/ PU TRACK Wheel track: Polyurethane (PU), grey. Wheel core: Polypropylene (PP), black (Blk). ounting bracket: teel, bright zinc plated. Application: ounting bracket: 19 x 42 or 20 x 58. ole distance (c/c): 32 or 46. Recoended for hard surface. Colour of wheel c.c static kg A B A B # Grey/Blk /42 # Grey/Blk /58 # Grey/Blk /58 19

20 BOX CATOR - INLAY TYPE BOX CATOR - INLAY TYPE Wheel: Polyamid (PA), black. ounting ring: teel, bright zinc plated. ounting ring: ole distance(c/c): Application: Ø26 x 1, Inlay type, ideal for table legs. 2 static/dynamic kg # Ø2,5 Ø /15 20 Ø26 20

21 BRA CATOR BRACELLA BRA CATOR BRACELLA Brass: Polished brass. Application: ounted by use of steel head F & 8 hangerbolt. To be bought separately. C Ø Ø static kg # ,5 21

22 FORK CATOR GARA - Ø76 FORK CATOR GARA - Ø76 No brake # With brake # Wheel: Polypropylene (PP), grey. etal parts: teel, bright zinc pl. Application: Premounted top plate 42 x 42. ole distance (c/c.) : 32, Ø5 screw holes. With or without brake static/dynamic kg 50/25 static/dynamic kg 50/25 32 x x 42 x 1,5 32 x x 42 x 1,5

23 FORK CATOR W/TOP PL. & PU TRACK TEEL FORK CATOR W/TOP PLATE & PU TRACK Wheel track: Polyurethane (PU), grey. Wheel core: Polypropylene (PP), black. etal parts: teel, bright zinc pl. Application: Premounted top plate. Recoended for hard surface. With or without brake. Fork castor without brake Fork castor with brake No brake static/dynamic kg # Ø /35 32 x x 42 x 1,5 # Ø /60 45,5 x 45,5 60 x 60 x 2,5 With brake static/dynamic kg # Ø /35 32 x x 42 x 1,5 # Ø /60 45,5 x 45,5 60 x 60 x 2,5 23

24 FORK CATOR W/TOP PL. & RUBBER TRACK TEEL FORK CATOR W/TOP PLATE & RUBBER TRACK Wheel: Grey soft rubber. etal parts: teel, bright zinc pl. Application: Premounted top plate. Recoended for hard surface. With or without brake.. Fork castor without brake Fork castor with brake No brake static/dynamic kg # /30 35 x x 50 x 1,5 # /45 45 x x 65 x 2 With brake static/dynamic kg # /30 35 x x 50 x 1,5 # /45 45 x x 65 x 2 24

25 FORK CATOR W/TOP PL. & FULL BRAKE & RUBBER TRACK TEEL FORK CATOR W/TOP PLATE & FULL BRAKE & RUBBER TRACK Wheel: Grey soft rubber. etal parts: teel, bright zinc plated. Application: Premounted top plate. Recoended for hard surface. With total brake which prevents as well swivelling as turning. Fork castor with full brake static/dynamic With brake kg # /45 45 x x 65 x 2 Brake system in action Off On Off On 25

26 FORK CATOR W/TREAE TE & RUBBER TRACK TEEL FORK CATOR W/TREAE TE & RUBBER TRACK Wheel: Grey soft rubber. etal parts: teel, bright zinc plated. Application: Premounted threaded stem in 10 x 30. Recoended for hard surface. With or without brake. Fork castor without brake Fork castor with brake No brake static/dynamic kg # / With brake static/dynamic kg # /

27 FORK CATOR W/OLE FOR BOLT & RUBBER TRACK TEEL FORK CATOR W/OLE FOR BOLT & RUBBER TRACK Wheel: Grey soft rubber. etal parts: teel, bright zinc plated. Application: ole for bolt. Recoended for hard surface. With or without brake. Fork castor without brake Fork castor with brake Ø No brake static/dynamic kg # /30 10,5 # /45 10,5 # /55 12,5 Ø With brake static/dynamic kg # /30 10,5 # /45 10,5 # /55 12,5 27

28 FORK CATOR W/FIXE PLATE & RUBBER TRACK TEEL FORK CATOR W/FIXE PLATE & RUBBER TRACK Wheel: Grey soft rubber. etal parts: 1,5 steel, bright zinc plated. Application: Premounted fixed top plate. Recoended for hard surface. Without brake. static/dynamic kg # /30 30 x x 45 x 1,5 28

29 INUTRIAL FORK CATOR W/WIVEL TOP PL. & RUBBER TRACK INUTRIAL FORK CATOR W/WIVEL TOP PLATE & RUBBER TRACK Wheel: Grey rubber. etal parts: 4 steel, bright zinc plated. Application: Premounted top plate. With or without total brake which prevents as well swivelling as turning. Recoended for hard surface. With or without brake. No brake static kg # With brake # static kg x x 135 x 4 80 x x 135 x 4 29

30 COOE TE RIGT CATOR Good advice in order to obtain optimum and correct use of your castors: iameter & hardness: Castors with large roll easily and absorb possible shocks. Castors with wide treads (tracks) spread the load and provide good floor protection. Castors with hard tread (track) offer higher load capacity and roll easily. Castors with soft tread (track) provide a cushioned ride and a quiet operation. What to use where? Castors with hard tread (track) are ideal for industrial locations with rough floors and steel grates. Castors with soft tread (track) protect the floor and offer a quiet operation though, less suited for use on carpets. 30

31 ALU LEG JACO & NIKO W/TOP PLATE ALU LEG JACO W/TOP PLATE Tube: Aluminium, silver sprayed Plug & spacer: Top plate: Plastic, black. 2 steel, bright zinc plated. Application: With premounted top plate 39 x 39 and 42 x 42. # x x 39 x 2 # x x 39 x 2 # x x 39 x 2 # x x 42 x 2 # x x 42 x 2 # x x 42 x 2 ALU LEG NIKO W/TOP PLATE Tube: Aluminium, silver sprayed or polished. Plug & spacer: Plastic, black. Top plate: 2 steel, bright zinc pl. Application: With premounted top plate 39 x 39 and 42 x 42. ilver sprayed Polished # x x x 39 x 2 # x x x 39 x 2 # x x x 39 x 2 # x x x 42 x 2 # # x x x 42 x 2 # # x x x 42 x 2 31

32 ALU LEG TRIA & TEEL LEG ARIA & ANY ALU LEG TRIA W/TOP PLATE Tube: Aluminium, silver sprayed. Plug & spacer: Plastic, black. Top plate: 2 steel, bright zinc plated. Application: With premounted top plate 39 x 39. # x 40 x x x 39 x 2 # x 40 x x x 39 x 2 TEEL LEG ARIA W/TREAE TE Leg: teel, silver sprayed. Base: Plastic, black. Application: With threaded stem 8 x 25. FINI Ø Ø # ilver TEEL LEG ANY W/AJUTABLE GLIE Leg: teel, chrome plated (CPL). Base: Plastic, black. Application: With fixed top plate 61 x adjustment. FINI Ø Tube # CPL to x x 60 x 1,5 32

33 80 TABLE ETAL LEG W/EIGT AJUTER TABLE ETAL LEG Ø 60 X 710 W/EIGT AJUTER Tube: 0,8 steel. ounting plate: Aluminium diecast. Adjustment foot: Black plastic. ize: Ø60 x 710. eight adjustment: Black painted # Chrome plated # ilver RAL 9006 # look (brushed nickel) # Packing: 1 set = 4 legs per box. Other colors and sizes on request. 25 LEG BRACKET 10 EGREE Bolt: Feature: ize: teel BZP 8 Bolt 10 G Angle 66 x 58 Item. No.: Application: Fixed leg bracket in 10 degree angle 45,50 4 x 3,80 TRU ALL 6,50 X ,50 1, R8 8x1,

34 TWITER - TE LEG CONNECTOR PATENTE TWITER - LEG CONNECTOR The Twister leg connector is designed for installing a leg in any position from 0 20 degrees one way, simply by twisting the leg tightly onto the connector plate. ay be used on tables, cabinets, beds, sofas ect. wherever a leg is needed. Twister gives the possibility to change the design on the furniture whenever there is a demand. Furthermore it may be used as a adjuster/leveller in case of uneven floors. Adjustable up to 40 when changing the angle from 0 20 degrees. Twister is designed for maximum leg of 50 and 8 bolt. The round sliding plate and body are made of black reinforced AB. The internal part is made of steel. anish design by IO & Jesper øller ansen. Pat. Pending in EU & U. Wood top mounting Glass top mounting w/aluminium disc & UV-glue (Leg: customer provided) (Leg: customer provided) 34

35 TWITER - TE LEG CONNECTOR WOO TOP OUNTING Total size: crew holes: Reinforced AB & steel Ø 106,5 x 27 Ø 5,5 A Item No.: Packing: 1 pce pr. inner box crews and hangerbolt to be bought separately. B Ø 5,5 Positioning marks for easy mounting C 106, thread E GLA TOP OUNTING W/ALUINIU IC & UV-GLUE For glass top mounting by use of Twister connector combined with an aluminum disc. 5 x 5 8 Aluminium ize: Ø 108 x 10, For screws 5 x Item No.: # Fixing screws and Twister connector to be ordered separately. 10 The aluminium disc is glued to the glass by use of Bohle UV-Glue B UV-lamp is needed. 35

36 INI TWITER - TE LEG CONNECTOR Ideal for chairs, beds, sofas and coffee tables. Total size: crew holes: Item No.: Packing: 304 Ø 85 x 24 Ø 5, , Black , Raw 1 pce. per inner box tainless steel 304, Black crews and hangerbolt to be bought separately. (Leg: customer provided) tainless steel 304, RAW PATENTE A thread B 50 C X 0 Preset positioning spots to insure correct adjustment and strength X= 0 0, 6.5 0,13.5 0, ,50 13,

37 TWIT N TURN - TE LEG CONNECTOR TWIT N TURN - TE LEG CONNECTOR Ideal for tables, cabinets, beds, sofas, coffee tables ect. Feature: ize: crew holes: Adjustable in 5 steps from 0 to 15 degrees PA6 re-inforced with glass fibre Ø 79,5 x 20 Ø 6,2 Item No.: # Packing: 1 pce. per inner box crews and hangerbolt to be bought separately 0 degrees 5,5 degrees 10,5 degrees 13,5 degrees 15 degrees 60 max ,50 6,20 Largest screw fit CK 6 12,20 The 4 illustrated screws are included. Used to set the desired bracket angle before installing the leg 18 max. 10 x 1,5 Imbedded arrow indicates the positioning 60 PATENTE 37

38 RIA LEG CONNECTOR F/QUARE LEG The RIA leg connector gives you the possibility to tighten and adjust your leg in any position due to its patented internal spring-loaded system. With a traditional bushing you normally reach a point where you cannot turn in the hangerbolt any further. If you then have a square leg that has to be flush with the edge of the furniture you have a problem. Only by heavy force you can try to turn your leg further and risk that the wood cracks. This will not happen with the RIA connector due to its patented internal spring-loaded system. PATENTE RIA LEG CONNECTOR Application: ize: ax. Leg size: Panel thickness: F/quare Legs W/pring Tension Black PC/AB 81,5 x 20,5 70 x 70, F/10 bolt From 10 Item No.: # ,5 81,50 10 x 1, max. 70, ax. 70. screw socket space/room 6 5x Tighten and adjust the leg to correct position without cracking the wood

39 ANGLE WEGE F/ RIA LEG CONNECTOR ANGLE WEGE FOR RIA LEG CONNECTOR Feature: ize: Adjustable in 3 steps from 0 to 10 degrees. Black PC/AB 81,5 x 20,5, 5 0 angle PATENTE Item No.: # ow to change the angle and direction 5 0 angle by use of one wedge 10 0 angle by use of two wedges 7 0 angle and change of direction by use of two wedges 39

40 AJUTABLE GLIE AJUTABLE GLIE ALPA Base: Polyamid (PA), black. tud: teel, bright zinc plated. Application: W/Knurled edge on base. Finish size stud Black Ø Black Ø Black Ø Black Ø Black Ø Black Ø Black Ø Black Ø Black Ø AJUTABLE GLIE AU Base: Polypropylene (PP), black. hell: teel, zinc plated. tud: teel, bright zinc plated. Application: W/Knurled edge on base. Finish size stud # Black/ZP Ø # Black/ZP Ø # Black/ZP Ø # Black/ZP Ø

41 AJUTABLE GLIE AJUTABLE GLIE VELA Base: Polyamid (PA), black. tud: teel, bright zinc plated. Application: W/Knurled edge on base. Finish size stud # Black Ø # Black Ø # Black Ø AJUTABLE GLIE OCTO Base: Polyamid (PA), black. tud: teel, bright zinc plated. Application: W/ quare hole 6x6 in bottom of base & 4 hex hole in top of the stud for quick fixing. Finish size stud # PA # PA

42 AJUTABLE GLIE AJUTABLE GLIE BETA Base: Polyamid (PA), black. tud: teel, bright zinc plated. Application: W/lot in bottom of base for quick fixing. Finish size stud # Black Ø # Black Ø AJUTABLE GLIE OLO Base: Polyamid (PA), black. tud: teel, bright zinc plated. Application: W/Knurled edge & pozidriv in bottom of base for quick fixing. Finish size stud # Black Ø # Black Ø

43 AJUTABLE GLIE AJUTABLE GLIE ARC Base: Polyamid (PA), black. Cover shell: teel, chrome plated. tud: teel, bright zinc plated. Application: W/Pozidriv in bottom of base for quick fixing Finish size stud # Black/CPL Ø30 12, # Black/CPL Ø50 12, AJUTABLE GLIE JACK Base: Polypropylene (PP), black. tud: teel, bright zinc plated. Application: W/Plastic hex nut for easy adjustment & with pozidriv in bottom of base & in top of the stud for quick fixing. Finish size stud # Black Ø

44 AJUTABLE GLIE AJUTABLE GLIE TITAN Base: Polypropylene (PP), white or black. hell: teel, chrome or zinc plated. tud: teel, bright zinc plated. Application: W/ex nut for easy adjustment ( without hex nut). Finish size stud # White/CPL Ø # Black/ZPL Ø # White/CPL Ø AJUTABLE GLIE TRATO Base: Polypropylene (PP), black. Cover shell: teel, chrome plated. tud: teel, bright zinc plated. Application: W/ex nut for easy adjustment. wivel stud for smooth leveling. Finish size stud # Black/CPL Ø

45 AJUTABLE GLIE AJUTABLE GLIE TIE Base: Polypropylene (PP), black. tud: teel, bright zinc plated. Application: W/ex nut for easy adjustment and 4 hex hole in top of the stud for quick fixing. wivel stud for smooth leveling. Finish size stud # Black Ø # Black Ø AJUTABLE GLIE NORFOLK Base: teel, nickel plated or tud: teel, bright zinc plated. Cushion: Black rubber. Application: W/Rubber silencer cushion for quiet working environment. Finish size stud # Black/NPL Ø # Black/-304 Ø

46 AJUTABLE GLIE AJUTABLE GLIE CONWAY Base: Polypropylene (PP), black. tud: teel, bright zinc plated. Application: W/ex nut for easy adjustment. Oscillating stud for angle adjustment. 20 Finish size stud # * Black Ø # Black Ø # Black Ø * NO EX NUT AJUTABLE GLIE COLORAO Base: Polypropylene (PP), black. Cover shell: teel, chrome plated. tud: teel, bright zinc plated. Application: W/ex nut for easy adjustment. Oscillating stud for angle adjustment. 20 Finish size stud # Black/CPL Ø # Black/CPL Ø AJUTABLE GLIE COO Base: teel, bright zinc plated. Cover: Transparent polyethylene (PE). tud: teel, bright zinc plated. Application: W/lot in top of stud for quick fixing. wivel stud for smooth leveling. Finish size stud # BZP Ø # BZP Ø # BZP Ø # BZP Ø

47 AJUTABLE GLIE JUBO GLIE W/TOP PLATE Body: Polyamid (PA), chrome plated (CPL). Base: Polyamid (PA), black. Application: With top plate 38 x 38 and 42 x 42. # 6363 Ø Base OEL FINI # 6747 # 5746 Ø # # 5746 CPL x x 38 x 1,5 # # 6747 CPL x x 38 x 1,5 # # 6363 CPL x x 42 x 2 CUP LEVELLER W/AJUTABLE GLIE Polyamid (PA), black. Application: Knock in mounting. Ø10 bore. Adjustable glide w/4 hex hole. Ø Cup Ø Glide Ø Bore x = # to x 13 # to x 13 47

48 ORTIE LEVELLER AJUTABLE GLIE Polyamid (PA), black. Application: Knock in mounting. Ø10 bore. Adjustable glide w/8 hex hole. Ø Cup Ø Glide Ø bore x Ø Ø x # to x 15 AJUTABLE CORNER BRACKET ANGOLO Glide: teel, bright zinc plated. Bracket: teel, bright zinc plated. Cover cap: Polyethylene (PE), white. Application: W/4 hex hole in top of stud for quick fixing. wivel stud for smooth leveling. W/Cover cap for floor protection. Left or right hand model. ite L or R glide size stud # Left Ø32,5 x # Right Ø32,5 x Ø4, Left Right

49 AJUTABLE GLIE CONCEALE AJUTER Base: Polyamid (PA), black. tud: teel, bright zinc plated. Bracket: Zamak, natural. Application: W/4 hex hole in top of stud for quick fixing. Oscillating stud for angle adjustment. For panel thickness W/fixing pin Ø5 x 9. G glide T tread stud # Ø20 x T 12,5 3,5 3, ø5 9 G KNOCK-IN PANEL AJUTER Base & bracket: Polyamid (PA), black. tud: teel, bright zinc plated. Application: W/ex nut for easy adjustment and slot in top of the stud for quick fixing. W/Knock-in pins Ø10 x 10, c/c: 32. G glide T tread stud # Ø23 x Ø ,5 10 T 15 25,5 T 44,5 3,5-30 G G 49

50 PANEL OE PLATIC PANEL OE W/AJUTER Glide base: Polyamid (PA), black. tud: teel, bright zinc plated. hoe body: Polyamid (PA), black. Application: W/Knurled edge on base for smooth fixing. F/panel thickness 18, 25 & 28. F/mounting on panel end only. 14 Panel thickness glide size stud # Ø24 x # Ø31 x # Ø31 x ,25, ETAL PANEL OE ALFOON Bracket: 2 steel. Finish: Black or silver painted. Application: F/panel thickness 18. W/6 hole for adjustable glide. Glide to be bought separately. Adjustable Glide Beta item is recoend. Color W panel L length screw holes hole distance # ilver x Ø4 c/c: 32 # Black x Ø4 c/c: 32 W 6 50 L

51 NAIL-ON GLIE PLATIC TACK, NAIL-ON GLIE Base: Polyethylene, (PE), brown or white. Nail: teel, zinc plated. Application: Nail-on glide with Ø2 x 15 nail. Finish 2 # White Ø13 6 # White Ø15 6 # Brown Ø15,5 6 # White Ø18 6 # Brown Ø18 6 # White Ø22 6 # Brown Ø PLATIC TACK W/FELT, NAIL-ON GLIE Base: Polyethylene, (PE), brown or white. Nail: teel, zinc plated. Felt: Grey. Application: Nail-on glide with Ø1,6 x 13 nail. Finish Felt - thickness # White Ø # Brown Ø # White Ø # Brown Ø # White Ø # Brown Ø # White Ø # Brown Ø ,6 51

52 NAIL-ON GLIE PLATIC TACK W/FELT, CREW-ON GLIE Base: Polystyrol, (P), white. tud: teel, zinc plated. Felt: Grey. Application: crew-on glide with Ø3,5 x 20 pozidriv screw. Finish Felt - thickness # White Ø # White Ø # White Ø # White Ø Ø3,5 Ø6 4 TEEL TACK, NAIL-ON GLIE Base: teel, nickel plated. Nail: teel, zinc plated. Application: Nail-on glide with nail. Finish N ail n ail length N # NPL Ø13 3 Ø1,4 12 # NPL Ø15 3 Ø1,4 14 # NPL Ø16 3,2 Ø1,75 14 # NPL Ø18 4 Ø1,75 16 # NPL Ø20 4 Ø2 18 # NPL Ø23 4 Ø2 19 # NPL Ø25 4 Ø2 19 # NPL Ø28 5 Ø2 20 # NPL Ø30 5 Ø2 20 # NPL Ø35 5 Ø2,5 27 n 52

53 NAIL-ON & KNOCK-IN GLIE NAIL-ON GLIE NORFOLK Base: teel, nickel plated. Nail: teel, zinc plated. Cushion: Black rubber. Application: W/Rubber silencer cushion for quiet working environment. Nail-on glide with flexible nail for angled chair legs. Finish N ail n ail length N # NPL Ø18 9 2,4 14 # NPL Ø20 9 2,4 14 # NPL Ø ,4 15 # NPL Ø ,4 15 # NPL Ø ,4 15 # NPL Ø n flexible angle TEEL GLIE, W/3 PRONG - KNOCK-IN Base: teel, nickel plated. Application: Knock-in glide with 3 prongs. Finish # NPL Ø10 2,7 # NPL Ø13 3,6 # NPL Ø15 3,8 # NPL Ø18 4,2 # NPL Ø20 4,2 # NPL Ø22 4,2 # NPL Ø24 4,5 # NPL Ø27 4,8 # NPL Ø30 5,7 # NPL Ø35 6,0 # NPL Ø38 6,5 53

54 KNOCK-IN GLIE & FELT PA TUBE RIVET PLATIC GLIE - KNOCK-IN Base: Polyethylene, (PE), white. Rivet: teel, zinc plated. Application: Knock-in glide with Ø9 x 4 steel rivet. Finish A B C # White/ZPL Ø20 5,5 4 Ø9 C B A FELT PA ELF AEIVE Nonwoven fabric based on synthectic fibers, impregnated with synthetic resin in watery dispersion in order to make it solid & durable, combined with a high quality hot-melt adhesive. Available in black, white & brown. Application: elf adhesive in round or square shape. To be used to avoid scratches on the floor. Tip: Avoid using the felt pad for at least 24 hours after mounting to guarantee maximum adhesion. Color A B # Black Ø10 1,5 # Brown Ø16 3,5 # Brown Ø20 3,5 # White Ø20 3,5 # Black Ø20 3,5 # Brown Ø22 3,5 # Brown Ø28 3,5 # White Ø28 3,5 # Brown Ø38 3,5 # Black Ø38 3,5 # Black Ø40 3,5 # Black Ø55 3,5 # Black Ø80 3,5 # Black 70 x 70 1,5 # White 10 x 130 3,5 A *Other sizes and colors on request. B 54

55 BUPER IC & UCTION PA BUPER IC ELF AEIVE PVC, transparent color. B Application: elf adhesive bumpers are the ideal solution to avoid scratching surfaces, prevent objects from skidding or vibrating, cushioning the closing of doors and drawers & equalizing differences. A Tip: Avoid using the bumber discs for at least 24 hours after mounting to guarantee maximum adhesion. Color A B # Transparent Ø7 1,5 # Transparent Ø8 1,6 # Transparent Ø10 1,5 # Transparent Ø10 3,0 # Transparent Ø13 4,0 UCTION PA W/OLLOW PIN PVC, transparent color. Application: For glass table tops. ollow pin. A B C # Ø Ø6 # Ø20 8,5 6,5 Ø6 C B A UCTION PA W/BALL PIN PVC, transparent color. Application: For glass table tops. Ball pin. B A A B C C # Ø Ø6 # Ø Ø8 55

56 UCTION PA/BUBER UCTION PA & TUBE LIE PVC, transparent color. Application: For glass table tops. h d h # Ø # Ø d TUBE LIE F/CURVE TUBE CREW-ON Polyethylene (PE), black. Application: For curved round tubes. With screw holes for fixing. tube L length B width h R radius A distance A1 distance # Ø ,5 6,5 90 9,5 42,3 # Ø 25 72, ,2 8,3 80 9,5 42,3 # Ø ,5 30 8, # Ø , R *inimum quantity: 1000 pcs B h A A1 L 56

57 TUBE LIE TUBE LIE W/FIXATION PIN Polyethylene (PE), black. Application: For round tubes with Ø5,7. fixation pin (d). Ø tube L length B width thickness # Ø , # Ø # Ø ,5 23,5 21,5 4 # Ø ,5 24,5 4 # Ø , # Ø , ,5 4 *inimum quantity: 1000 pcs Ø d B L TUBE LIE - CREW-ON Polyethylene (PE), black. Ø Application: For round tubes. With screw holes for fixing. tube L length B width thickness B Ø screw A L A distance # Ø ,5 19,8 13,6 7 2 x Ø5,2 33,5 # Ø , ,7 7 1 x Ø5,8 In centre # Ø ,8 24,8 11,8 7,7 2 x Ø5,2 22,5 # Ø40 49, ,3 1 x Ø5,5 In centre # Ø45 46,5 45,8 17,8 7,8 2 x Ø6 22,5 *inimum quantity: 1000 pcs 57

58 WAER & PACER NYLON WAER Polyamid (PA), natural. d # ,5 0,5 # ,3 1,5 # ,6 2 # ,6 2 # ,4 1,5 # ,5 2 # # ,5 2,5 # ,5 2,5 # ,5 # *Other sizes and colors on request. inimum quantity: 1000 pcs d ITANCE PACER Polyethylene (PE), black or white. Color d # Black 20 5,3 20 # Black 20 5,3 22,5 # Black 22 6,0 10 # Black 20 6,3 3 # Black 20 6,3 7,5 # Black 20 8,4 10 # Black 20 8,4 12,5 # Black 20 10,5 3 # Black 20 10,5 6 # Black 20 10,5 20 # White 30 6,3 10 # Black 40 10,5 20 *Other sizes and colors on request. inimum quantity: 1000 pcs d 58

59 INERT GLIE INERT GLIE F/RECTANGULAR TUBE Polyethylene (PE), black. Application: For rectangular tubes. Color shaft # Black 30 x ,0 # Black 35 x 20 13,6 5,1 # Black 35 x 25 13,5 4,6 # Black 40 x 20 13,9 4,6 # Black 40 x 25 11,7 4,8 # Black 50 x 25 12,2 5,3 # Black 50 x 30 13,6 4,6 # Black 50 x ,3 # Black 60 x 20 14,2 4,9 # Black 60 x 30 13,7 5,0 # Black 80 x 30 17,8 5,6 *inimum quantity: 1000 pcs Other sizes & colors on request. INERT GLIE F/QUARE TUBE Polyethylene (PE), black or white. Application: For square tubes. Color shaft # Black 12 x 12 11,6 4,0 # Black 16 x ,0 # Black 18 x ,0 # Black 20 x ,0 # White 20 x ,0 # Black 22 x ,0 # Black 25 x 25 13,5 5,0 # White 25 x 25 13,5 5,0 # Black 30 x 30 13,5 5,0 # Black 40 x ,0 # Black 50 x ,0 # Black 60 x ,0 *inimum quantity: 1000 pcs Other sizes & colors on request. 59

60 INERT GLIE INERT GLIE F/ROUN TUBE Polyethylene (PE), black or white. Application: For round tubes. Color shaft # Black Ø14 9,3 4,0 # Black Ø15 9,6 4,0 # Black Ø ,1 # Black Ø ,0 # Black Ø22 11,8 4,0 # Black Ø25 11,8 5,0 # White Ø25 11,8 5,0 # Black Ø ,0 # Black Ø ,0 # Black Ø32 14,5 5,0 # Black Ø35 14,3 5,0 # Black Ø40 11,7 5,0 # Black Ø42 11,5 5,0 # Black Ø50 11,7 5,2 *inimum quantity: 1000 pcs Other sizes & colors on request. INERT GLIE F/ OVAL TUBE Application: Polyethylene (PE), black. For oval tubes. Color shaft # Black 20 x 10 10,5 3,0 # Black 25 x 12 10,5 3,0 # Black 30 x ,9 # Black 35 x 20 11,9 5,3 # Black 38 x 20 11,3 4,9 # Black 40 x 20 11,5 4,8 # Black 48 x 20 11,5 4,8 # Black 50 x 20 11,5 4,8 *inimum quantity: 1000 pcs 60 Other sizes & colors on request.

61 INERT GLIE INERT GLIE W/10 G ANGLE - F/QUARE & RECTANGULAR TUBE Polyethylene (PE), black. Application: For square and rectangular tubes with 10 degree angle. Color shaft # Black 15 x 15 11,5 7,2 # Black 16 x # Black 18 x ,8 # Black 20 x # Black 20 x ,3 # Black 25 x # Black 25 x ,5 # Black 30 x ,3 # Black 30 x 20 14,5 8, *inimum quantity: 1000 pcs Other sizes & colors on request. INERT GLIE W/ETAL TREA - F/ROUN TUBE Polyamid (PA), black. Application: With metal thread/hex nut. For round tubes. Color T thread shaft # Black Ø # Black Ø ,5 # Black Ø ,5 # Black Ø *inimum quantity: 1000 pcs T Other sizes & colors on request. 61

62 INERT GLIE & CAP INERT GLIE W/ETAL TREA - F/QUARE TUBE Polyethylene (PE), black. Application: With metal thread/hex nut. For square tubes. Color T thread shaft # Black 20 x ,2 6 # Black 25 x ,6 7 # Black 30 x ,8 8 # Black 40 x ,2 8 *inimum quantity: 1000 pcs Other sizes & colors on request. T PLATIC CAP F/ROUN TUBE Polyethylene (PE), black or white & PVC, black. Application: For round tubes. 1 Color aterial B 1 B # Black PE Ø10 Ø13,4 14,6 12,1 # Black PE Ø13 Ø16, # Black PE Ø16 Ø19,7 21,2 17 # Black PE Ø18 Ø22,3 23,2 19,2 # Black PE Ø20 Ø24,2 23,3 18,9 # Black PE Ø22 Ø27,6 24,1 20,1 # Black PE Ø25 Ø28,1 30,6 24,8 # White PE Ø25 Ø28,1 30,6 24,8 # Black PE Ø28 Ø32,8 28,8 23,9 # Black PVC Ø32 Ø36 30,8 25,5 # Black PVC Ø35 Ø39 31,2 25 # Black PVC Ø42 Ø *inimum quantity: 1000 pcs 62 Other sizes & colors on request.

63

64 Item No.: IO A/ ileparken 11 K kovlunde (Copenhagen) Phone: (+45) Fax: (+45) enmark siso@siso.dk Web: