Quick change polygon tool clamping system!

Size: px

Start display at page:

Download "Quick change polygon tool clamping system!"

Hillary Stone
5 years ago
Views:

1 Tungaloy Report No. 410-US Total tooling system New ine of Extension and Reduction Adapters Quick change polygon tool clamping system!

Features High rigidity The TungCap clamping mechanism is extremely rigid and resists bending

position The polygonal clamping design creates a self centering effect to improve accuracy

Face & taper contact Center height repeatability ±2 µm High clamping power Face & taper

2 Features High rigidity The TungCap clamping mechanism is extremely rigid and resists bending forces Excellent accuracy The taper and face contact ensure high repeatability of the edge position The polygonal clamping design creates a self centering effect to improve accuracy Quick change system (Interchangeable with PSC standard) Polygon design for self centering Face & taper contact Center height repeatability ±2 µm High clamping power Face & taper contact V groove for ATC arm 2 Magazine and spindle positioning groove Coolant hole : ed items : ed in Japan

3 Easy tool management Suitable for a variety of applications TungCap can be used as modular tools for a wide range of machining Adapters with HSK and BT with dual contact interfaces are available Ideal tooling can be applied Optimum overhang length can be set with extension or reduction arbors Short tool exchanging time 12 Tool changing time (min) Exchanging time 1/10 No need to index the insert on the machine ±2 µm! Highly accurate repeatability! No test cutting required by setting-up and measuring outside of machine Drastically reduces machine downtime 0 Conventional High productivity on flexible machine tools Slant type toolholders for external turning Avoids interference between work piece and toolholder with short overhang Reduces spindle load and chattering Square type Slant type ong overhang 45 Short overhang : ed items : ed in Japan 3

Holders for milling & drilling Interface of machine PSC BT HSK-A Adapters for BT shank with dual contact Adapters for HSK shank BT-FC P22 HSK-A-C/-T P23 Extension

Side lock holders for endmill Side lock holders for drill ER collet chuck holders Center alignment holders Thermal shrinking holders C-MAXIN P19 C-EM P15 C-EM-E P16 C-ER

4 Holders for milling & drilling Interface of machine PSC BT HSK-A Adapters for BT shank with dual contact Adapters for HSK shank BT-FC P22 HSK-A-C/-T P23 Extension Reduction C-EPS C-ES C-EXN C-TDX Available in 2014 spring Available in 2014 spring Available in 2014 spring Available in 2014 spring C-EX P24 C-RE P24 Power chuck holders Side lock holders for endmill Side lock holders for drill ER collet chuck holders Center alignment holders Thermal shrinking holders C-MAXIN P19 C-EM P15 C-EM-E P16 C-ER P17 ADJ-C P19 C-SRKIN P20 Shell mill holders Slot milling holders Indexable modular system Tool clamp fixture for TungCap shank C-SEM P18 C-SCA P21 C-ODP P21 4 : ed items : ed in Japan

for boring bars C-ACNR P6 C-ADJNR P7 C-CHFVR P9 C-CHSR P10 C-ADI P14 C-ABB P13 Threading C-ACNN P6 C-ADNNN P7 C-TBK P14 Adapters

5 Toolholders for turning Interface of machine PSC BT HSK-T Adapters for BT shank with dual contact Adapters for HSK shank BT-FC-T P23 HSK-A-C-T P23 Clamping unit (special) Extension Reduction C-EX P24 C-RE P24 Toolholders with PSC shank Grooving tool Adapters for boring bars C-ACNR P6 C-ADJNR P7 C-CHFVR P9 C-CHSR P10 C-ADI P14 C-ABB P13 Threading C-ACNN P6 C-ADNNN P7 C-TBK P14 Adapters for external turning C-CER P9 C-PCNR P6 C-PDJNR P7 C-ADER P12 C-ASHR P12 C-SVVCN P8 C-SVJCR P8 C-ADES P12 : ed items : ed in Japan 5

Toolholders C-ACNR/ External Turning A type (Negative rake, Double clamping system) MIN ød1 MIN ød2 1 2 Std.

8 C6ACNR/45135-12N (2) 63 135 41 45 190 125 C6ACNR/45065-16N (2) 63 65 41 45 190 125 (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure

8 C6PCNR/45065-12N (2) 63 65 41 45 190 125 1204** C-ACNN SC42 SP4 C4 CS4 P-3 ACS SATZ- -5W BP-7 T15F M10X1 -M5 SATZ- M8X1- M3 MIN ød1 f f External Turning

Corner Applicable radius inserts rε (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure External Turning Shim Right hand (R) shown

C5ACNN00125-12N (2) 50 125 32 0 165 - C6ACNN00100-12N (2) 63 100 37.5 0 190 - C6ACNN00140-12N (2) 63 140 37.5 0 190 - Std. Corner radius rε 0.

6 Toolholders C-ACNR/ External Turning A type (Negative rake, Double clamping system) MIN ød1 MIN ød2 1 2 Std. Corner radius R 1 2 f ød1 ød2 rε C4ACNR/ N (2) C5ACNR/ N (2) C6ACNR/ N (2) C6ACNR/ N (2) C6ACNR/ N (2) (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure C-PCNR/ CN** 1204** ASC 422 SP- CSTB ACP S MIN ød1 f MIN ød2 1 2 R 1 2 f ød1 ød2 C5PCNR/ N (2) CN** 0.8 C6PCNR/ N (2) ** C-ACNN SC42 SP4 C4 CS4 P-3 ACS SATZ- -5W BP-7 T15F M10X1 -M5 SATZ- M8X1- M3 MIN ød1 f f External Turning Applicable inserts Shim Spring pin Shim screw Clamp Clamping screw Right hand (R) shown Spring Wrench P type (Negative rake, ever-lock system) Coolant nozzle Std. Corner Applicable radius inserts rε (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure External Turning Shim Right hand (R) shown Spring pin ever Clamping Wrench Coolant screw nozzle A type (Negative rake, Double clamping system) f ød1 ød2 C5ACNN N (2) C5ACNN N (2) C6ACNN N (2) C6ACNN N (2) Std. Corner radius rε 0.8 Applicable inserts CN** 1204** (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure Shim ASC 422 Spring pin Shim screw Clamp SP- CSTB ACP S Clamping screw ACS- 5W Spring Wrench Coolant nozzle BP-7 T15F SATZ- M8X1- M3 6 : ed items : ed in Japan

C-PDJNR/ External Turning A type (Negative rake, Double clamping system) MIN ød1 28 f MIN ød2 C5PDJNR/35060-15N (2) 50 60 32 35 165 110 0.

Shim Spring pin ever Clamping Wrench Coolant screw nozzle Corner Applicable R 1 2 f ød1 ød2 radius inserts rε (1) Capable for normal

M10X1 -M5 A type (Negative rake, Double clamping system) MIN ød1 28 f MIN ød2 C5ADJNR/35060-15N (2) 50 60 32 35 165 110 C6ADJNR/45065-15N

pin Corner Applicable screw screw R 1 2 f ød1 ød2 inserts rε C4ADJNR/27050-15N (2) 40 50 25 27 145 110 (1) Capable for normal pressure

5 ACP 4S ACS -5W Right hand (R) shown Wrench Coolant nozzle BP-7 T15F SATZ- M10X1 -M5 A type (Negative rake, Double clamping system) MIN ød1

8 DN**1504** C6ADNNN00100-15N (2) 63 100 37.5 0 190 - (DN**1506**) C6ADNNN00140-15N (2) 63 140 37.

7 C-PDJNR/ External Turning A type (Negative rake, Double clamping system) MIN ød1 28 f MIN ød2 C5PDJNR/ N (2) DN**1504** C6PDJNR/ N (2) C-ADJNR/ 1 (DN**1506**) 2 Right hand (R) shown Std. Shim Spring pin ever Clamping Wrench Coolant screw nozzle Corner Applicable R 1 2 f ød1 ød2 radius inserts rε (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure External Turning ASD423(04) (ASD432(06)) SP4(04) (SP4S(06)) C4 SSHM 4-4 P-3 SATZ- M10X1 -M5 A type (Negative rake, Double clamping system) MIN ød1 28 f MIN ød2 C5ADJNR/ N (2) C6ADJNR/ N (2) C6ADJNR/ N (2) C-ADNNN External Turning 1 Shim Spring Shim Clamp Clamping Spring Std. pin Corner Applicable screw screw R 1 2 f ød1 ød2 inserts rε C4ADJNR/ N (2) (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure DN**1504** ASD423(04) (DN**1506**) (ASD432(06)) SP -2.5 CSTB -3.5 ACP 4S ACS -5W Right hand (R) shown Wrench Coolant nozzle BP-7 T15F SATZ- M10X1 -M5 A type (Negative rake, Double clamping system) MIN ød1 f 1 2 Std. Corner Applicable inserts 1 2 f ød1 ød2 rε C5ADNNN N (2) C5ADNNN N (2) DN**1504** C6ADNNN N (2) (DN**1506**) C6ADNNN N (2) (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure Shim ASD423(06) (ASD432(04)) Spring pin Shim screw SP -2.5 CSTB -3.5 ACP 4S Clamp Clamping Spring Wrench Coolant screw nozzle ACS -5W BP -7 T15F SATZ- M10X1 -M5 : ed items : ed in Japan 7

C-SVJCR/ External Turning S type (Positive rake, Screw on clamping system) MIN ød1 50 f MIN ød2 1 2 Shim Shim Clamping Wrench Wrench screw screw Coolant nozzle Std.

170 190 (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure 0.8 VC**1604** SSV 32 DTS5-3.5 CSTB -3.5 Right hand (R) shown T-15F P-3.

125 32 0 C6SVVCN00100-16N (2) 63 100 37.5 0 C6SVVCN00140-16N (2) 63 140 37.5 0 Std.

8 C-SVJCR/ External Turning S type (Positive rake, Screw on clamping system) MIN ød1 50 f MIN ød2 1 2 Shim Shim Clamping Wrench Wrench screw screw Coolant nozzle Std. Applicable Corner R 1 2 f ød1 ød2 inserts rε C4SVJCR/ N (2) C5SVJCR/ N (2) C6SVJCR/ N (2) (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure 0.8 VC**1604** SSV 32 DTS5-3.5 CSTB -3.5 Right hand (R) shown T-15F P-3.5 SATZ- M10X1 -M5 C-SVVCN External Turning S type (Positive rake, Screw on clamping system) 27 f f C5SVVCN N (2) C5SVVCN N (2) C6SVVCN N (2) C6SVVCN N (2) Std. Corner rε Applicable inserts (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure 0.8 VC**1604** SSV32 DTS5-3.5 Shim Shim Clamping screw screw Wrench Wrench CSTB- 3.5 T-15F P-3.5 Coolant nozzle SATZ- M10X1 -M5 8 : ed items : ed in Japan

C-CER/ External threading Dual method type f 1 2 C4CER/27050-16ERN

(2) 63 65 41 45 Shim Shim Clamping Clamp Std.

coolant pressure A16-1DT DTS5-3.5 CSTB- 3.

5 M10X1 -M5 SATZ- C-CHFVR/ Grooving Horizontal type A f1 B 1

Right hand (R) shown Coolant nozzle C4CHFVR/27050N (2) 40 42.

9 C-CER/ External threading Dual method type f 1 2 C4CER/ ERN (2) C5CER/ ERN (2) C6CER/ ERN (2) Shim Shim Clamping Clamp Std. Corner Applicable screw screw set Wrench Wrench Coolant nozzle R 1 2 f inserts rε ER/ (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure A16-1DT DTS5-3.5 CSTB- 3.5ST Right hand (R) shown CSP16 T-15F P-3.5 M10X1 -M5 SATZ- C-CHFVR/ Grooving Horizontal type A f1 B 1 Clamping screw Wrench Applicable inserts Blade R 1 *A 3 f1 *B 3 Right hand (R) shown Coolant nozzle C4CHFVR/27050N (2) C5CHFVR/35060N (2) Page C6CHFVR/45065N (2) Page 10 DTF, DTE, DTX DTR, DGS, DGM CAER/ CAFR/ CSHB- 6-A P-4 SATZ- M10X1 -M5 (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure Combination of blade and toolholder Blades Toolholders CAER CAE CAFR CAF CHFVR*** CHFV*** : ed items : ed in Japan 9

C-CHSR/ Grooving Vertical type f1 B A 1 Clamping screw Wrench R 1 A 3 f1 B 3 Applicable inserts Blade Right hand (R) shown Coolant nozzle C4CHSR/27050N (2) 40 50 36 16.

5 DGS/SGS, DGM/SGM, DTX, DTE, DTR CAER/ CAFR/ CSHB- 6-A P-4 SATZ- M10X1 -M5 (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure Combination of blade and toolholder Blades

10 C-CHSR/ Grooving Vertical type f1 B A 1 Clamping screw Wrench R 1 A 3 f1 B 3 Applicable inserts Blade Right hand (R) shown Coolant nozzle C4CHSR/27050N (2) C5CHSR/35060N (2) Table Table 1 1 C6CHSR/45065N (2) DGS/SGS, DGM/SGM, DTX, DTE, DTR CAER/ CAFR/ CSHB- 6-A P-4 SATZ- M10X1 -M5 (1) Capable for normal pressure coolant(2) Capable for 7Mpa coolant pressure Combination of blade and toolholder Blades Toolholders CAER CAE CAFR CAF CHSR*** CHS*** Insert application Insert Application Table. 1: Offset dimensions for blade For external grooving For face grooving Grooving Turning Parting off External Face External Face Blades A B CAER/-3T CAER/-4T CAER/-5T CAER/-6T CAFR/-3T12-* CAFR/-4T16-* CAFR/-5T20-* CAFR/-6T20-* DGM / SGM DGS / SGS DTE DGE DTX DTI DTF DTR DTIU Undercutting DTA Al wheel machining 10 : ed items : ed in Japan

Blades (For general purpose) CAE R/ External grooving and turning r Insert * Max. seat groove depth Inserts size R ar (mm) 1 f W 3 CAER/-3T16 16 45 10.4 3 DGS / SGS 4 CAER/-4T16 16 45 10.

5 6 DTR CAF R/ Face grooving and turning Shank CHFVR/ CHSR/ Right hand (R) shown Parts Clamping screw Wrench BHM6-20-A P-4 W 1 f r m max Insert Min. dia. Max.

11 Blades (For general purpose) CAE R/ External grooving and turning r Insert * Max. seat groove depth Inserts size R ar (mm) 1 f W 3 CAER/-3T DGS / SGS 4 CAER/-4T DGM / SGM DTX 5 CAER/-5T DTE 6 CAER/-6T DTR CAF R/ Face grooving and turning Shank CHFVR/ CHSR/ Right hand (R) shown Parts Clamping screw Wrench BHM6-20-A P-4 W 1 f r m max Insert Min. dia. Max. dia. Max. groove seat m m depth size R (mm) (mm) ar (mm) 1 f (2) W Inserts (3) CAFR/-3T DTF CAFR/-3T CAFR/-3T CAFR/-3T CAFR/-3T CAFR/-4T CAFR/-4T CAFR/-4T CAFR/-4T CAFR/-5T CAFR/-5T CAFR/-5T CAFR/-5T CAFR/-5T CAFR/-6T (1) CAFR/-6T (1) CAFR/-6T (1) CAFR/-6T (1) (1) When depth is deeper than insert length, 1 corner type is recommended. (2) f value in the above table is calculated with groove width W shown in the table. DTF DTE DTX DGS DGM Shank CHFVR/ CHSR/ Right hand (R) shown Parts Clamping screw Wrench BHM6-20-A P-4 BHM6-20-A P-4 BHM6-20-A P-4 BHM6-20-A P-4 Caution In DTF and DTX insert types, seat size 6 inserts are not available. When 6 size insert is required, the DTE, DGM or DGS type is recommended. (3) Min. diameter m of DTE, DGS and DGM insert Inserts DTE 3 / DGS 3 / DGM 3 DTE 4 / DGS 4 / DGM 4 DTE 5 / DGS 5 / DGM 5 DTE 6 / DGS 6 / DGM 6 m (mm) ø44 ø42 ø50 ø48 Note When diameter is smaller than m, DTF or DTX type insert is recommended. : ed items : ed in Japan 11

12 C-ADER/ Adapters for square shank toolholders h h1 2 R f1 2 f h1 h 1 Clamp screw C4ADE-20R/ SRM10X20DIN912 C5ADE-20R/ SRM10X16 Toolholders may be used after shortening shank length C-ASHR/ Adapters for square shank toolholders b 2 3 h1 h2 h3 2 R f2 h1 b h2 h3 1 Clamp screw C6ASHR/3/4X SRM10X25DIN915 C6ASHR/1X SRM12X30DIN915 Toolholders may be used after shortening shank length R f2 h1 b h2 h3 1 Clamp screw C5ASHR/ SRM10X25DIN91545H C6ASHR/ SRM12X30DIN91545H C8ASHR/ Toolholders may be used after shortening shank length C-ADES Adapters for square shank toolholders 3 Coolant nozzle r1 r2 h F1 r2 3 h f r1 C4ADES C5ADES : ed items : ed in Japan

13 C-ABB Adapters for boring bars with sleeves ød2 1 1 C6ABB1X SCREW1/2-20X.500EM HSSS3/8-24X0.250CUP.P C6ABB11/2X SCREW1/2-20X.500EM HSSS1/2-20X1.251/2DOGP ød2 1 1 C5ABB C6ABB SRM10X20DIN915 SRM10X12DIN1835-B C6ABB SRM12X20DIN915 SRM12X16DIN1835-B C8ABB SRM10X20DIN915 SRM10X12DIN1835-B C8ABB SRM12X20DIN915 SRM12X16DIN1835-B ø2 G1 ø2 Clamp screw Used on A-type sleeves Used on B-type sleeves Clamp screw Used on A-type sleeves Used on B-type sleeves SC Sleeves for C-ABB adapters Fig. A Fig. B ø2 ød2 1 G1 Fig. ød2 1 G1 Fig. SC1-1/2T.250A M6 A SC1-1/2T.312A M6 A SC1-1/2T.375A M8 A SC1-1/2T.500A M9 A SC1-1/2T.625B B SC1-1/2T.750B B SC1-1/2T1.000B B SC1-1/2T1.250B B ød2 1 G1 Fig. ød2 1 G1 Fig. SC25T6A M6 A SC25T8A M8 A SC25T10A M8 A SC25T12A M8 A SC25T16B B SC25T20B B SC40T6A M6 A SC40T8A M6 A SC40T10A M8 A SC40T12A M8 A SC40T16B B SC40T20B B SC40T25B B SC40T32B B : ed items : ed in Japan 13

14 C-ADI Adapters for boring bars ø2 C-TBK-R/ M12 1 ød2 1 G1 1 ød2 1 G1 C4ADI M6 C4ADI M8 C4ADI M8 C4ADI M12 C4ADI M12 C5ADI M6 C5ADI M8 C5ADI M8 C5ADI M12 C5ADI M12 C5ADI M12 C6ADI M8 C6ADI M8 C6ADI M10 C6ADI M12 C6ADI M12 C6ADI M12 C6ADI M12 C8ADI M8 C8ADI M8 C8ADI M10 C8ADI M12 C8ADI M12 C8ADI M12 C8ADI M12 Adapters for parting and grooving blades f1 B1 C6TBK C6TBK-32R : ed items : ed in Japan

15 C-EM Weldon endmill holders (DIN1835 Form B) ø2 ø2 ød 2 25 ød2 1 1 ød2 1 1 C6EM1/4X C6EM3/8X C6EM1/2X C6EM5/8X C6EM3/4X C6EM7/8X C6EM1X C6EM11/4X C6EM11/2X ød2 1 1 ød2 1 1 C4EM06X C4EM08X C4EM10X C4EM12X C4EM14X C4EM16X C5EM06X C5EM08X C5EM10X C5EM12X C5EM14X C5EM16X C5EM18X C5EM20X C5EM25X C6EM6X C6EM8X C6EM10X C6EM12X C6EM14X C6EM16X C6EM18X C6EM20X C6EM25X C6EM32X C6EM40X C8EM06X C8EM08X C8EM10X C8EM12X C8EM14X C8EM16X C8EM18X C8EM20X C8EM25X C8EM32X C8EM40X C8EM50X : ed items : ed in Japan 15

16 C-EM-E Drill holders (DIN1835 Form E whistle notch) max. min. 2 J max. min. 2 2 J ø2 ø2 ød 2 25 ød2 1 1 J ød2 1 1 J Min. Max. Min. Max. C4EM06X70E M5 C6EM14X80E M10 C4EM08X70E M6 C6EM16X85E M12 C4EM10X70E M8 C6EM18X85E M12 C4EM12X75E M10 C6EM20X85E M16 C4EM14X75E M10 C6EM25X90E M20 C5EM06X70E M5 C6EM32X95E M20 C5EM08X70E M6 C8EM06X65E M5 C5EM10X70E M8 C8EM08X65E M6 C5EM12X75E M10 C8EM10X65E M8 C5EM14X75E M10 C8EM12X70E M10 C5EM16X80E M12 C8EM14X70E M10 C5EM18X80E M12 C8EM16X75E M12 C5EM20X85E M16 C8EM18X75E M12 C6EM6X75E M5 C8EM20X80E M16 C6EM8X75E M6 C8EM25X90E M20 C6EM10X75E M8 C8EM32X95E M20 C6EM12X80E M10 16 : ed items : ed in Japan

17 C-ER ER collet holders (DIN6499) J CSI ø Range CSI 1 1 J Min. Max. C4ER16X ER M10 C4ER20X ER C4ER20X ER C4ER25X ER C4ER25X ER C4ER32X ER C5ER16X ER M10 C5ER16X ER M10 C5ER20X ER C5ER20X ER M12 C5ER20X ER M12 C5ER25X ER C5ER25X ER M16 C5ER32X ER C5ER32X ER M22X1.5 C6ER16X ER M10 C6ER16X ER M10 Wrench is not included Range CSI 1 1 J Min. Max. C6ER16X ER M10 C6ER20X ER C6ER20X ER M12 C6ER20X ER M12 C6ER20X ER M12 C6ER25X ER C6ER25X ER M16 C6ER25X ER M16 C6ER25X ER M16 C6ER32X ER C6ER32X ER M22X1.5 C6ER32X ER M22X1.5 C6ER32X ER M22X1.5 C6ER40X ER C6ER40X ER M28X1.5 C6ER40X ER M28X1.5 ER Collet Wrench P. 25 P. 26 C-ER-M Mini ER collet chuck holders (DIN 6499) J CSI Min. Max. CSI 1 1 J C4ER16X70M ER M10 C5ER16X100M ER M10 C5ER16X130M ER M10 C6ER16X100M ER M10 C6ER16X130M ER M10 C6ER16X160M ER M10 Wrench is not included Range ER Collet Wrench Preset Screw P. 25 P. 26 : ed items : ed in Japan 17

18 C-SEM Shell mill holders with coolant hole 2 ø ød ød C6SEM3/4X1.377C C6SEM3/4X3.937C C6SEM1X1.457C Wrench is not included C6SEM1X3.937C C6SEM11/4X2.362C C6SEM11/2X2.362C ød ød C4SEM16X32C C4SEM16X55C C4SEM22X40C C4SEM22X55C C5SEM16X35C C5SEM16X70C C5SEM22X35C C5SEM22X70C C5SEM27X40C C5SEM32X40C C6SEM16X50C C6SEM16X100C C6SEM22X50C C6SEM22X100C C6SEM27X60C Wrench is not included C6SEM27X100C C6SEM32X60C C6SEM40X60C C8SEM16X50C C8SEM16X100C C8SEM22X50C C8SEM22X100C C8SEM27X50C C8SEM27X100C C8SEM32X50C C8SEM32X100C C8SEM40X60C Wrench P : ed items : ed in Japan

19 C-MAXIN Power chuck holders ø2 max. min. J ø2 Range ød J Min. Max. Min. Max. C6MAXIN3/4X M16 C6MAXIN11/4X M16 Wrench is not included Range ød Min. Max. Min. Max. C5MAXIN20X M16 C6MAXIN20X M16 C6MAXIN32X M16 C8MAXIN20X M16 C8MAXIN32X M16 Wrench is not included Wrench Preset Screw J P. 26 ADJ C-ER Center alignment collet chuck holders 3 Ref. ø ø3 0.1 mm 1 CSI Range Min. Max. ADJC5ER ER ADJC6ER ER : ed items : ed in Japan 19

20 C-SRKIN Thermal shrinking holders J max. min. 4.5 ø2 3 ød ød C6SRKIN1/4X M5 C6SRKIN5/16X M6 C6SRKIN3/8X M8 C6SRKIN1/2X M10 C6SRKIN5/8X M12 C6SRKIN3/4X M16 C6SRKIN1X M16 C6SRKIN11/4X M16 Min. Max. J ød C4SRKIN6X M5 C4SRKIN8X M6 C4SRKIN10X M8 C4SRKIN12X M10 C4SRKIN14X M10 C4SRKIN16X M12 C4SRKIN18X M12 C4SRKIN20X M16 C5SRKIN6X M5 C5SRKIN8X M6 C5SRKIN10X M8 C5SRKIN12X M10 C5SRKIN14X M10 C5SRKIN16X M12 C5SRKIN18X M12 C5SRKIN20X M16 C5SRKIN25X M16 C6SRKIN6X M5 C6SRKIN8X M6 C6SRKIN10X M8 C6SRKIN12X M10 C6SRKIN14X M10 C6SRKIN16X M12 C6SRKIN18X M12 C6SRKIN20X M16 C6SRKIN25X M16 C6SRKIN32X M16 Min. Max. J 20 : ed items : ed in Japan

21 C-ODP Indexable modular adapters with threaded connection ø2 10 M 2 M M C4ODP10X53 M C4ODP12X53 M C4ODP16X53 M C5ODP10X53 M C5ODP10X103 M C5ODP12X53 M C5ODP12X103 M C5ODP16X53 M C5ODP16X103 M C6ODP10X55 M C6ODP10X105 M C6ODP10X130 M C6ODP12X55 M C6ODP12X105 M C6ODP12X130 M C6ODP16X55 M C6ODP16X105 M C6ODP16X130 M C-SCA Slot milling holders Collar ød 2 ød C6SCA C6SCA C8SCA C8SCA : ed items : ed in Japan 21

22 SCA Collar for slot milling holder (Option) ø2 H 1 2 H SCA , 5, 7, 8, 10, 12, 14 SCA , 5, 7, 8, 10, 12, 14 BT-FC Adapters BT shank with dual contact BT-FC (Dual contact) G N C Cutting edge C 1 1 G N* (N m) BT40FC-C4-040 C M16 55 BT40FC-C5-050 C M16 95 BT40FC-C6-075 C M BT50FC-C4-040 C M24 55 BT50FC-C4-070 C M24 55 BT50FC-C5-040 C M24 95 C 1 1 G N* (N m) BT50FC-C5-080 C M24 95 BT50FC-C6-050 C M BT50FC-C6-100 C M BT50FC-C8-070 C M BT50FC-C8-120 C M * Recommend clamping torque 22 : ed items : ed in Japan

23 BT-FC-T Adapters BT shank with dual contact (For turning on multi task machine) BT-FC (Dual contact) G N C Cutting edge C 1 1 G N* (N m) BT40FC-C4-040T C M16 55 BT40FC-C5-050T C M16 95 BT50FC-C6-050T C M BT50FC-C8-070T C M * Recommend clamping torque HSK-A-C/-T Adapters HSK shank N C for HSK-T shank C 1 1 N* (N m) HSK63A-C4-080T C HSK63A-C5-090T C HSK63A-C6-110T C for HSK-A shank C 1 1 N* (N m) HSK100A-C6-110 C HSK100A-C8-120 C * Recommend clamping torque : ed items : ed in Japan 23

24 C-EX Extension adapters N C C 1 1 N* (N m) C4EX-060 C C4EX-080 C C5EX-080 C C5EX-100 C C6EX-100 C C6EX-140 C C8EX-100 C C8EX-160 C C-RE 1 * Recommend clamping torque Reduction adapters N C C 1 1 N* (N m) C5-C4RE-060 C C5-C4RE-080 C C6-C4RE-080 C C6-C5RE-080 C C6-C5RE-120 C C8-C4RE-070 C C8-C5RE-080 C C8-C6RE-080 C C8-C6RE-120 C * Recommend clamping torque 24 : ed items : ed in Japan

ER Collet ER11 SPR 0.5-1 AA Collet size Collet type 3 Range (mm) Additional feature ER11 11 0.5-1 0.

. JET2 External coolant ER25 25 ER32 32 ER40 40 1 2 4 ERSPR- Range (mm) Class standard ER11 ER16 ER20 ER25 ER32 ER40 0.

25 ER Collet ER11 SPR AA Collet size Collet type 3 Range (mm) Additional feature ER SPR Standard type AA Ultra precision ER ER20 20 SEA Sealed type.. JET2 External coolant ER25 25 ER32 32 ER ERSPR- Range (mm) Class standard ER11 ER16 ER20 ER25 ER32 ER ERSEA- Range Seal for internal oil hole (mm) ER16 ER20 ER25 ER32 ER : Not available : ed items : ed in Japan 25

26 Wrench for ER Collet Chuck WRENCH-ER / ER DIN 6499 Wrench ER 25, 32, 40, 50 Wrench ER 11, 16, 20, 25 Mini Wrench ER 11,16, 20, TungShort A H WRENCHER11MINI WRENCHER WRENCHER16MINI WRENCHER WRENCHER20MINI WRENCHER WRENCHER25MINI WRENCHER WRENCHER WRENCHER WRENCHER20SHORTRING WRENCHER32SHORT WRENCHER40SHORT Preset screws for ER Collet Chuck PRESET ER-JET 40 Fig. 1 Fig. 2 J 15 J ø3 15 PRESETER-JET8X1 M8X1.0 2 PRESETER-JET8X1.25 M8X PRESETER-JET10X1.5 M10X1.5 2 PRESETER-JET12X1 M12X1.0 2 PRESETER-JET12X1.75 M12X PRESETER-JET12X1.75 M12X PRESETER-JET14X1 M14X1.0 2 PRESETER-JET16X2 M16X2 2 PRESETER-JET16X2 M16X2 1 PRESETER-JET18X1 M18X1.0 2 PRESETER-JET18X1.5 M18X1.5 2 PRESETER-JET18X1.5 M18X1.5 1 PRESETER-JET22X1.5 M22X1.5 2 PRESETER-JET22X1.5 M22X1.5 1 PRESETER-JET28X1.5 M28X1.5 2 J Fig. Wrench for Shell Mill Holder WRENCH SEMC / DIN 6368 (Option) Inner diameter of cutter body ø Screw size H WRENCHM8SEMC16 16 M H WRENCHM10SEMC22 22 M WRENCHM12SEMC27 27 M WRENCHM16SEMC32 32 M WRENCHM20SEMC40 40 M WRENCHM24SEMC50 50 M : ed items : ed in Japan

27 A SC-SEA Collet for Power Chuck B SC-SPR 1 1 G ød G ød B HRC N HRC N5 A SC-SEA SC Sealed Straight Collet - Metric ød 1 G SC20SEA M16 SC20SEA M16 SC20SEA M16 SC20SEA M16 SC20SEA M16 SC20SEA M16 SC20SEA M16 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC32SEA M24x1.5 SC-SPR SC Straight Collet - Metric ød 1 G SC20SPR M16 SC20SPR M16 SC20SPR M16 SC20SPR M16 SC20SPR M16 SC20SPR M16 SC20SPR M16 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 SC32SPR M24x1.5 10MPa : ed items : ed in Japan 27

28 A SC-SPR Collet for Power Chuck B SC-SEA 2 1 D G d HRC N HRC N5 A SC-SPR SC Straight Collet- Inch ød 1 2 G SC3/4SPR1/ M16 SC3/4SPR5/ M16 SC3/4SPR3/ M16 SC3/4SPR7/ M16 SC3/4SPR1/ M16 SC3/4SPR5/ M16 SC1-1/4SPR1/ M24x1.5 SC1-1/4SPR5/ M24x1.5 SC1-1/4SPR3/ M24x1.5 SC1-1/4SPR1/ M24x1.5 SC1-1/4SPR5/ M24x1.5 SC1-1/4SPR3/ M24x1.5 SC1-1/4SPR7/ M24X1.5 SC1-1/4SPR M24x1.5 B SC-SEA SC Sealed Straight Collet- Inch ød 1 2 G SC3/4SEA1/ M16 SC3/4SEA5/ M16 SC3/4SEA3/ M16 SC3/4SEA7/ M16 SC3/4SEA1/ M16 SC3/4SEA5/ M16 SC1-1/4SEA1/ M24x1.5 SC1-1/4SEA5/ M24x1.5 SC1-1/4SEA3/ M24x1.5 SC1-1/4SEA1/ M24x1.5 SC1-1/4SEA5/ M24x1.5 SC1-1/4SEA3/ M24x1.5 SC1-1/4SEA7/ M24x1.5 SC1-1/4SEA M24x1.5 10MPa 28 : ed items : ed in Japan

29 SC-SPR Preset screw for Power Chuck Fig. 1 Fig. 2 8 J K G K J G W W PRESET SC CAP Preset screw for SC Collets (Power Chuck) Collet Fig. Wrench W J G Range K PRESETSCCAP8x M8x25 M PRESETSCCAP8x M8x25 M PRESETSCCAP10x M10x30 M24x PRESETSCCAP10x M10x30 M24x Wrench Collet size SC20 SC20 ø Wrench for TungMax Collets SC Collet extracting hook for TungMax WRENCHMAXIN20HOOK WRENCHMAXIN32HOOK EXTRACTORSCCOETS K G Preset screws G K PRESETMAXIN16X30 M PRESETMAXIN16X44 M PRESETMAXIN20X55 M Clamp fixture ø2 ød2 1 2 H1 H2 H4 b 5 ød4 H2 H4 2 5 ø4 b H1 MUTICAMPC MUTICAMPC MUTICAMPC MUTICAMPC TOOCAMP40ROTARY MUTICAMP63A/C : ed items : ed in Japan 29

3726 N Ventura Drive, Arlington Heights, I 60004, U.S.A. Inside Sales: +1-888-554-8394 Technical Support: +1-888-554-8391 Fax: +1-888-554-8392 www.tungaloyamerica.com Tungaloy Canada 432 Elgin St.

30 3726 N Ventura Drive, Arlington Heights, I 60004, U.S.A. Inside Sales: Technical Support: Fax: Tungaloy Canada 432 Elgin St. Unit 3, Brantford, Ontario N3S 7P7, Canada Phone: Fax: Tungaloy de Mexico S.A. C os Arellano 113, Parque Industrial Siglo XXI Aguascalientes, AGS, Mexico Phone: Fax: Become a fan on facebook Follow us on Watch our videos on You Tube Scan for instant web access Distributed by: Oct (TA)

Quick change system with polygon coupling tooling

Tooline www.tungaloy.com Tungaloy Report No. 410-G TUNGCAP Quick change system with polygon coupling tooling ACCEERATED MACHINING Tooline Boosts productivity in your machine! www.tungaloy.com Increase