Microwave Isolators and Circulators
|
|
|
- Alvin Stokes
- 5 years ago
- Views:
Transcription
1 Microwave Isolators and Circulators 24 HOUR SHIPPING ON IN-STOCK ITEMS
2 Single Junction Octave/Broadband Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power 2 Range 3 Outline Weight Typ Min Typ Max Typ Max Avg Pk D3I 2040 D3C to (100) D3I 2060 D3C to (100) D3I 2080 D3C to (195) D3I 2652 D3C to (100) D3I 3060 D3C to (60) D3I 3570 D3C to (35) D3I 3783 D3C to (35) D3I 4080 D3C to (35) D3I 6012 D3C to (30) D3I 7011 D3C to (30) D3I 7018 D3C to (25) D3I 8012 D3C to (30) D3I 8016 D3C to (25) D3I 8018 D3C to (25) D3I 8020 D3C to (25) D3I 1020 D3C to (25) D3I 1218 D3C to (25) D3I 1826 D3C to (25) D3I 2030 D3C to +65 5* 0.9 (25) D3I 2004 D3C to +65 5* 0.9 (25) D3I 2640 D3C to +65 5* 0.9 (25) 24 HOUR SHIPPING ON IN-STOCK ITEMS Models in BOLD type are in-stock and ship within 24 hours ARO. Single Junction EW/Broadband Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power 2 Range 5 Outline Weight Typ Min Typ Max Typ Max Avg Pk DMI 2652 DMC to (20) DMI 5011 DMC to (15) DMI 5912 DMC to (15) DMI 6018 DMC to (11) DMI 6513 DMC to (11) DMI 6518 DMC to (11) DMI 7417 DMC to (11) DMI 1018 DMC to (11) Notes: 1. Other frequencies available on request. 2. Consult factory for power handling capability of circulator. 3. Storage temperature range is -55 C to +100 C. All units will operate -54 C to +85 C. Consult factory for specifications. 4. Connector and termination locations are interchangeable. 5. Storage temperature range is -55 C to +125 C. 6. Models in BOLD type are in-stock and ship within 24 hours ARO. See Outline Drawings on Page 3. Outline Dimension - Inches (Centimeters) Number A B C D E F G H J 9** (2.54) (2.54) (0.97) (0.48) (0.48) (1.651) (0.25) (2.032) (1.02) 10** (1.91) (1.91) (0.97) (0.48) (0.48) (1.079) (0.25) (1.397) (0.69) 11*** (1.27) (1.47) (0.97) (0.48) (0.48) (0.25) (0.762) 2
3 Single Junction High Performance/Narrowband Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power 2 Range 3 Outline Weight Typ Min Typ Max Typ Max Avg Pk D3I 0555 D3C to (135) D3I 0560 D3C to (135) D3I 0670 D3C to (129) D3I 0780 D3C to (129) D3I 0890 D3C to (80) D3I 9525 D3C to (80) D3I 0112 D3C to (76) D3I 0116 D3C to (76) D3I 0118 D3C to (56) D3I 0120 D3C to (56) D3I 0223 D3C to (56) D3I 3742 D3C to (39) D3I 4450 D3C to (39) D3I 5459 D3C to (29) D3I 5964 D3C to (29) D3I 7510 D3C to (21) D3I 7784 D3C to (21) D3I 8596 D3C to (21) D3I 9211 D3C to (21) D3I 1112 D3C to (21) D3I 1213 D3C to (21) D3I 1415 D3C to (21) D3I 1720 D3C to (21) D3I 1922 D3C to (21) D3I 2021 D3C to (21) D3I 2023 D3C to (21) Outline Drawings Numbers 1 11 Outline Dimension Inches (Centimeters) Number A B C D E F G H J (4.01) (4.11) (1.78) (0.36) (0.63) (3.213) (0.25) (3.505) (1.750) (3.17) (3.17) (1.78) (0.36) (0.63) (2.286) (0.25) (2.667) (1.330) (2.54) (2.54) (1.27) (0.63) (0.63) (1.715) (0.25) (2.032) (1.020) (2.18) (2.49) (1.27) (0.63) (0.63) (1.587) (0.25) (1.676) (0.840) (1.27) (1.78) (1.27) (0.63) (0.46) (1.156) (0.20) (0.864) (0.430) (1.57) (1.98) (1.27) (0.63) (0.63) (1.079) (0.25) (1.067) (0.530) (4.01) (4.11) (1.90) (0.66) (0.66) (3.213) (0.25) (3.505) (1.750) (3.17) (3.17) (1.90) (0.66) (0.66) (2.286) (0.25) (2.667) (1.330) 3
4 Dual Junction Octave/Broadband Insertion Frequency 1 Isolator Circulator Isolation Loss Temperature Approx Range Model Model Per Junction Per Junction Power 2 Range 3 Outline Weight Min Max Max Avg Pk D4I 2040 D4C to (195) D4I 2060 D4C to (195) D4I 2080 D4C to (195) D4I 2652 D4C to (195) D4I 3060 D4C to (115) D4I 3570 D4C to (65) D4I 3783 D4C to (65) D4I 4080 D4C to (65) D4I 6012 D4C to (55) D4I 7011 D4C to (55) D4I 7018 D4C to (45) D4I 8012 D4C to (55) D4I 8016 D4C to (45) D4I 8018 D4C to (45) D4I 8020 D4C to (45) D4I 1020 D4C to (45) D4I 1218 D4C to (45) D4I 1826 D4C to (45) D4I 2030 D4C to * 1.6 (45) D4I 2004 D4C to * 1.6 (45) D4I 2640 D4C to * 1.6 (45) Notes: 1. Other frequencies available on request. 2. Consult factory for power handling capability of circulator. 3. Storage temperature range is -55 C to +100 C. All units will operate -54 C to +85 C. Consult factory for specifications. 4. Connector and termination locations are interchangeable. 4
5 Dual Junction High Performance/Narrowband Insertion Frequency 1 Isolator Circulator Isolation Loss Temperature Approx Range Model Model Per Junction Per Junction Power 2 Range 3 Outline Weight Min Max Max Avg Pk D4I 0555 D4C to (265) D4I 0560 D4C to (265) D4I 0670 D4C to (253) D4I 0780 D4C to (253) D4I 0890 D4C to (155) D4I 9525 D4C to (155) D4I 0112 D4C to (147) D4I 0116 D4C to (147) D4I 0118 D4C to (107) D4I 0120 D4C to (107) D4I 0223 D4C to (107) D4I 3742 D4C to (73) D4I 4450 D4C to (73) D4I 5459 D4C to (53) D4I 5964 D4C to (53) D4I 7510 D4C to (37) D4I 7784 D4C to (37) D4I 8596 D4C to (37) D4I 9211 D4C to (37) D4I 1112 D4C to (37) D4I 1213 D4C to (37) D4I 1415 D4C to (37) D4I 1720 D4C to (37) D4I 1922 D4C to (37) D4I 2021 D4C to (37) D4I 2023 D4C to (37) Outline Drawings Numbers Outline Dimension Inches (Centimeters) Number A B C D E F G H J (8.03) (4.11) (1.90) (0.66) (0.66) (3.213) (0.25) (7.518) (3.76) (6.35) (3.17) (1.90) (0.66) (0.66) (2.286) (0.25) (5.842) (2.92) (5.08) (2.54) (1.27) (0.63) (0.63) (1.715) (0.25) (4.572) (2.29) (3.15) (1.98) (1.27) (0.63) (0.63) (1.079) (0.25) (2.642) (1.32) (2.54) (1.78) (1.27) (0.63) (0.46) (1.156) (0.20) (2.134) (1.07) (8.03) (4.11) (1.78) (0.63) (0.63) (3.213) (0.25) (7.518) (3.76) (6.35) (3.17) (1.72) (0.63) (0.63) (2.286) (0.25) (5.842) (2.92) (4.37) (2.49) (1.27) (0.63) (0.63) (1.587) (0.25) (3.861) (1.93) 5
6 Waveguide Available in 10% Bandwidths Frequency 1 Isolator Circulator Insertion Temperature Approx Approx Range Model Model Isolation Loss Range 2 Size Weight (GHz) Number 3 Number 3 (db) (db) VSWR ( C) (LxWxH) Oz (gm) Min Max Max DWFI 62 _ DWFC 62 _ to x 2.00 x (118) DWFI 42 _ DWFC 42 _ to x 1.30 x (115) Outline Drawings All models feature threaded flange holes. Waveguide Flange Isolators Available in 200 MHz Bandwidths Frequency 1 Isolator Insertion Temperature Approx Approx Range Model Isolation Loss Range 2 Mating Size Weight (GHz) Number 3 (db) (db) VSWR ( C) Flange (LxWxH) Oz (gm) Min Max Max DFW 62 _ to +85 UG-1665/U 0.50 x 1.31 x (118) DFW 42 _ to +65 UG x 0.88 x (115) Outline Drawings Thru holes only available. Notes: 1. Other frequencies available on request. 2. Storage temperature range is -55 C to +100 C. All units will operate -54 C to +85 C. Consult factory for specifications. 3. Specify center frequency in GHz as last 3 digits of model number. 6
7 DITOM Microwave Microwave DITOM Microwave has a unique capability to provide high quality microwave components for military, and commercial applications. Founded in 1987 the company has extensive experience in designing and manufacturing isolators and circulators to satisfy specific system requirements for reliability, cost, and size. While standard isolators and circulators are described in this catalog, special devices can be designed to meet your system requirements. DITOM has established a reputation throughout the industry for on-time delivery and minimum return of parts less than 1%. Finish Standard units are supplied with nickel plate and chemical film per MIL-C-5541B Class 3. Vinyl/Epoxy gray painted units are available per customer requirements. Test Data A certificate of compliance is supplied with all units. Test data is available on special orders. DITOM's quality assurance standards meet Mil-I A requirements. Frequency Ranges A standard line of isolators and circulators is offered in selected frequency ranges from 0.50 to 40.0 GHz. Performance optimized components Phase matching, temperature stabilization, extended bandwidth are available on special orders. Connectors As a standard, all coaxial units are supplied with SMA-Female connectors. Other connector types and configurations can be supplied on special order. Microstrip and Stripline Integration DITOM isolators and circulators feature a removable connector option for integration into microwave subassemblies. Ordering Information DITOM isolators and circulators can be ordered directly from the factory, through local representatives or on-line at Many Ditom isolators and circulators are in stock and will ship in 24 hours ARO. 7
8 Co-Isoguide Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power 2 Range 3 Outline Weight Typ Min Typ Max Typ Max Avg Pk DWI 7011 DWC to (115) DWI 8012 DWC to (105) DWI 1218 DWC to (90) Notes: 1. Other frequencies available on request. 2. Consult factory for power handling capability of circulator. 3. Storage temperature range is -55 C to +100 C. 4. Specify input when ordering (-1 =W/G input; -2 =Coax input) Isolator. 5. Specify input/output locations when ordering Circulator. Outline Drawings Numbers Outline Waveguide Dimension Number Number Inches (Centimeters) A B C D E 20 WR (4.09) (2.49) (3.30) (2.21) (5.16) 21 WR (4.83) (2.49) (3.15) (2.21) (5.16) 22 WR (2.92) (1.78) (2.41) (1.78) (4.45) E. Clinton Avenue E. McKinley Avenue HWY 41 HWY 168 Fresno Yosemite International Airport N. Clovis Avenue 24 HOUR SHIPPING ON IN-STOCK ITEMS ORDER ON-LINE TODAY AT: All major credit cards accepted HWY 99 HWY 180 N. Chestnut Avenue N. Peach Avenue S. Clovis Avenue 5114 E. Clinton Way, Suite 101 Fresno, CA Phone: Fax: sales@ditom.com
FERRITE PRODUCTS TABLE OF CONTENTS
FERRITE PRODUCTS TABLE OF CONTENTS No. B002i SERIES FERRITE PRODUCTS Rectangular Waveguide Circulator 3 Port Junction Design 140 T173 Rectangular Waveguide Circulator 4 Port Differential Phase Shift Design
DIRECTIONAL COUPLERS FEATURES APPLICATIONS DIRECTIONAL COUPLERS
DIRECTIONAL COUPLERS DIRECTIONAL COUPLERS FEATURES igh power to 1000 watts CW Frequency ranges from 20 Mz to 18 Gz Low insertion loss and VSWR igh directivity Rugged packaging Directional and bidirectional
Section 3. Rotary Joints. Introduction
Section Rotary Joints Introduction For more than forty years, MDL has produced waveguide rotary joints and is one of the major suppliers in both domestic and overseas markets. Many of the larger military
Wide band isolators (Peripheral Mode) 1-3 // // 2-6 // // 2-18 // //4-12// 4-20// 6-21// 8-18
SMA/N/ K Connector options (X) Isolator Port 1 Port 2 Female Male -1 Male Female -2 Female Female -3 Male Male -4 Tolerance Table Metric (inch) (unless otherwise stated): Hole diameter +/- 0.1mm, (+/-
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
Coaxial SMA MaleTerminations
Coaxial SMA MaleTerminations _ MECHANICAL SPECIFICATIONS Stainless Steel, Passivated.. high power Coaxial SMA Male terminations product selection chart P/N Power Avg. Peak Power Length Width CSM-1 1 W
Section 16. Short Slot Hybrids. Theory
Section Short Slot Hybrids Theory FIGURE 1 COUPLER TERMINOLOGY Coupling = Ratio A to C Balance = Ratio B to C Directivity = Ratio C to D Isolation = Ratio A to D Isolation = Coupling + Directivity PHASE
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
Microstrip Circulators & Isolators
Drop-in and Microstrip Circulators & Isolators Part 4 Drop-in and Microstrip Circulators & Isolators FERRITE DOMEN Co. Since 1959 Ferrite Domen Co. provides microwave drop-in and microstrip circulators
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
Waveguide Directional Couplers. Cross Guide Couplers CC SERIES
Directional Couplers Cross Guide Couplers CC SERIES Broad Wall Couplers Side Wall Couplers DC SERIES SC SERIES CROSS GUIDE COUPLERS (3PORT) Coupling Values: Nominal Coupling Values Accuracy V.S.W.R. 20
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
October Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Isolator SMD CU4S0506 Series 5x5mm* * Dimensions Code JIS Isolator SMD Product compatible with RoHS directive Overview of CU4S0506 Series PART NUMBER CONSTRUCTION CU4S0506
SINGLE-POLE SWITCHES SWITCHES
SINGLE-POLE SWITCHES SWITCHES MITEQ offers a broad line of switches covering multioctave bands from 0.2 to 18 GHz. Single-pole, single-throw through single-pole, seven-throw switches are available as standard
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
D-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
Switching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
DVFL2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVFL series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating.
MMA Q5 Q / / / - /Chip Gain Flatness RL Current -1 d B T yp/m a x
New MMIC Products High Performance/Quality MMIC Based on InGaP HBT, phemt, and Linear MESFET Technologies High Linearity, Fully Matched WiMax Power Amplifiers High Power/Efficiency, Wide and Narrow Band
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
CSB Series Broadband Motorized Coaxial Switches
CSB Series Broadband Motorized Coaxial Switches Features Broadband DC to 806 MHz 3 or 4 port configurations Three port application require only the addition of a shorting cap Non-volatile position memory
800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
Coaxial N MaleTerminations
Coaxial N MaleTerminations _ MECHANICAL SPECIFICATIONS Brass, Nickel Plated.. high power coaxial N Male Terminations product selection chart P/N Power Avg. Power Peak Length Width CFT-2 NM 2 W 1.5 KW.
Monolithic Amplifiers 50Ω, Broadband, DC to 8 GHz
Surface Mount Monolithic Amplifiers 50Ω, Broadband, DC to 8 GHz Features InGaP HBT microwave amplifiers miniature SOT-89 package frequency range, DC to 8 GHz, usable to 10 GHz up to 18.2 dbm typ. output
N Male Connector Clamp/Solder Attachment for PE-C600, inch, LMR-600
N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
October Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
Waveguide Load Terminations
Load Terminations Fixed Loads / FL SERIES Sliding Loads / SL SERIES The Solution range of Low Power and Sliding load terminations has been designed to offer optimum Return Loss Performance. The dissipative
2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
Solder Assembly Kit
ORIGINAL INSTRUCTIONS Solder Assembly Kit 1055420-1 Instruction Sheet 408-8677 30 APR 17 Rev C 10 12 1. INTRODUCTION Item Number TE Part Number Description Qty Per Assy 1 1055441-1 Inserts 1 2 1055440-1
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
BNC and MHV SHV-5 and SHV-10 SHV-20 and SHV-B
Coaxial is the description for electrical feedthroughs with parallel and concentric conductor paths, and with the inner most conductor path electrically isolated from the vacuum flange. Grounded Shield
MITEQ AM-1185 SERIES AMPLIFIER
MITEQ AM-1185 SERIES AMPLIFIER GAIN VAR. IMPED. NOISE P1 db NOM. FREQUENCY MODEL (±db) IN/OUT FIGURE (dbm) POWER OUTLINE NUMBER (Min.) (Max.) (Max.) (Ohms) (db, Typ.) (Typ.) VOLTS (ma) NO. 1 1000 AM-1185-1000
Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/81/83197649.jpg "April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s April 2015 Multilayer Directional Coupler For 1920-1980MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Directional Coupler For 1920-1980MHz Conformity to RoHS Directive
2.4mm Coaxial Calibration Kit
User Guide 2.4mm Coaxial Calibration Kit DC to 50 GHz Models: 7950CK10/11 7950CK20/21 7950-511 (A) 2/15 User Guide 2.4mm Coaxial Calibration Kit DC to 50 GHz Models: 7950CK10/11 7950CK20/21 2900 Inland
ecatalog MAC Product Features Ordering and Shipping Information Octave Band Directional Couplers Wideband Directional Couplers
etlog M Product Features Ordering and Shipping Information Octave and Directional ouplers Wideband Directional ouplers 90 Degree Hybrid Quadrature ouplers Wilkinson Stripline 2-Way Power Dividers Wilkinson
AVALCO. American Valve Manufacturing Company. Manufacturers of Standard and Custom Charging Valves
AVALCO American Valve Manufacturing Company Manufacturers of Standard and Custom Charging Valves AVALCO WAS FOUNDED IN 1983 OUR MAILING ADDRESS IS: 2029 Verdugo Blvd. #710 Montrose, CA 91020 OUR PHONE
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
Manufacturers of Standard and Custom Charging Valves
Manufacturers of Standard and Custom Charging Valves WE WERE FOUNDED IN 1983 OUR MAILING ADDRESS IS: 2029 Verdugo Blvd. #710 Montrose, CA 91020 CUSTOMER SERVICE/ORDER DESK DIRECT: (310) 676-3057 OUR MAIN
Evaluation and Qualification of Ferrite Isolators and Circulators for Space Applications. Jean-Marc BUREAU, Aurélie BOISSE, Savas KURT, Eric LAROCHE
29 avenue de la Baltique 91953 Courtaboeuf, FRANCE The most important thing we build is trust Evaluation and Qualification of Ferrite Isolators and Circulators for Space Applications Jean-Marc BUREAU,
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Rack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
NL 50 S M / 5 - A - D
NL single-output DC/DC converters 8Vin, Vout, watts How to Order: NL S M / - A - D Series Total Output Power Single Output Industrial (I) or Military (M) INPUT CHARACTERISTICS : Options: Maximum current
Electrical Stability (ohm-cm, max.) Heat Aging Resistance After
CONDUCTIVE ELASTOMER WAVEGUIDE GASKETS Waveguide Gaskets For effective EMI shielding and pressure sealing for choke, cover and contact flanges, Chomerics waveguide gaskets ensure low insertion, low flange
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
High RF (HiRF) EMC Solutions Overview
EMC Solutions HiRF s High RF (HiRF) EMC Solutions Overview Q par Angus Ltd have teamed up with TMD Technologies Ltd to produce a range of unrivalled antenna and amplifier solutions that exceed the latest
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
Narrow Band Medium Power Amplifier
FEATURES: Coverage From 0.3 to 97.0 GHz Removable Connectors Single Bias (+12 to +15VDC) Power Supply Compact/Rugged Thin-Film Construction Economically Priced DESCRIPTION: CNM Series Cernex s CNM series
Apr11 Rev A
Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
Narrowband Coaxial Isolators and Circulators
FEATURES: Low Cost, High Quality Compact, Light Weight High Perfmance Wide Operation Temperature Common Radar and Wirele s s in.08-26.5 GHz range APPLICATIONS: Load isolation Module integration SPECIFICATIONS:
Electrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
DynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and
REVISED DynaFlex_021516_final_no logos.qxp_layout 1 5/10/17 1:56 PM Page 1 See back cover to learn about R single path to optimal performance www.dynawave.com DynaFlex RF and microwave cable assemblies
SRS SEALED ROTARY SENSORS
SRS SEALED ROTARY SENSORS Innovation In Motion INNOVATION IN MOTION Penny+Giles SRS280 sealed rotary sensors and SRS880 submersible rotary sensors have been specially developed to provide maximum performance
TE Connectivity DEUTSCH Single Module EN4165 connectors
Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors
Fresno Yosemite International Airport to 2233 Ventura St, Fresno, CA Google Maps
Fresno Yosemite International Airport to 2233 Ventura St, Fresno, CA 93721 - Google Maps http://maps.google.com/maps?f=d&source=s_d&saddr=fresno+air+terminal,+east+clinton+way,+fresno... Page 2 of 2 Fresno
Power Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
DCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
3.5mm Coaxial Calibration Kit
User Guide 3.5mm Coaxial Calibration Kit DC to 26.5 GHz Models: 8050CK10/11 8050CK20/21 8050-511 (A) 2/15 User Guide 3.5mm Coaxial Calibration Kit DC to 26.5 GHz Models: 8050CK10/11 8050CK20/21 2900 Inland
DUMMY LOADS INTRODUCTION SPECIAL DESIGN
DUMMY OADS INTRODUCTION DEFINITION: A dummy load is a high power single terminal device intended to terminate a transmission line. They are primarily employed to test high power microwave systems at full
NB 50 S M / 5 - A - D
NBS single and triple-output DC/DC converters 4 Vin, 8Vout, watts FEATURES.38 Inch Profile Synchronization N + Redundancy Remote Turn On (TTL) Parallelable Operation Trim Pin How to Order: Over Temperature
C2000 and C4200 Series: Multi-octave Bandwidth Directional Couplers Stripline Couplers, 25 to 50 Watts Avg, SMA Female Connectors
ONTNTS 3200 Series: Octave andwidth Directional ouplers Stripline ouplers, 50 Watts vg, SM Female onnectors 2000 and 4200 Series: Multi-octave andwidth Directional ouplers Stripline ouplers, 25 to 50 Watts
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
SEALED POWER TRANFORMERS BV SERIES EI30 0.6VA 2.8VA FEATURES OUTLINE DIMENSIONS
ZETTLER Magnetics, Inc. COLUMBIA ALISO VIEJO, CA 266 4-360-838 FAX 4-360-83 WEB SITE: HTTP://WWW.ZETTLERMAGNETICS.COM E-MAIL: SALES@ZETTLERMAGNETICS.COM FEATURES UL & VDE CERTIFICATION SMALL PHYSICAL FOOTPRINT
Coaxial Cable Attenuation Charts A compilation of some of the most common coaxial cable attenuations. Nominal attenuation of 30.
A compilation of some of the most common coaxial cable attenuations. Nominal attenuation of 30.5 metres (100ft) Cable Type 70-85 MHz 148-174 MHz 400-520 MHz 806-960 MHz 2.4-2.45 GHz 5.8-5.85 GHz RG178B/U
Color Codes. Symbols. English BK BL BR BU DB DG DO FU GD GN GP GR GW KH LA LB LG NV OL OR PE PK PU RE RO SI SW TT VO WH WP.
Catalogue 2017 Color Codes Color Code BK BL BU DB DG DO FU GD GN GP GR GW KH LA LB LG NV OL OR PE PK PU RE RO SI SW TT VO WH WP English BLACK BLUE OWN BURGUNDY DEMI OWN DARK GRAY DARK OWN FUCHSIA GOLD
Section 5. Directional Couplers. Introduction
Section Directional ouplers Introduction t MDL, directional couplers have always received the engineering and manufacturing attention due a major component. wide variety of types are offered, often tailored
Product Specification QSL RF Connectors
Product Specification QSL RF Connectors 108-2324 04Feb09 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics QSL RF Connectors which
MCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
3-Phase Military AC-DC Power Supply 3-Phase, VrmsL-L
-4-1U 3-Phase Military AC-DC Power Supply 3-Phase, 8-265 VrmsL-L 47-8 Hz Semi-Regulated 28 V-48 V 4 W 525 W Transient Input Power Input Frequency Output Voltages Output Power Sealed Construction, Ultra
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
Comparative measurements as per UN-R10* in DC-Charging mode with varying charging currents
Comparative measurement DC-Laden 1/14 Comparative measurements as per * in DC-Charging mode with varying charging currents *E/ECE/324/Add.9/Rev. E/ECE/TRANS//Add.9/Rev. Comparative measurement DC-Laden
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
GHz Standard Performance Dual Pole Parabolic Reflector Antenna
5.25-5.85 GHz Standard Performance Dual Pole Parabolic Reflector Antenna Standard Performance Dual Pole Parabolic Reflector Antennas from Cambium Networks are well suited for deployment with any of the