Waveguide Load Terminations
|
|
|
- Ashley Rodger Thornton
- 5 years ago
- Views:
Transcription
1 Load Terminations Fixed Loads / FL SERIES Sliding Loads / SL SERIES The Solution range of Low Power and Sliding load terminations has been designed to offer optimum Return Loss Performance. The dissipative element is mounted in the waveguide in such a way as to give minimal reflection over the full band WG range. The FL and SL series of loads are manufactured to the highest quality standards. Loads are manufactured with the full range of International Flange Styles as shown in the TWS Flange Catalogue and can be offered with alternative plated finishes on request. All TWS Loads are offered with an attractive, hardwearing, epoxy paint finish. The Solution facility is approved to ISO 9001: 2000.
2 TWS Load Terminations Standard Fixed Loads These devices are manufactured from selected waveguide tube. The flange interface is precisely controlled to offer the optimum performance. Sliding Loads The standard sliding loads are assembled in the same way as the standard fixed loads using selected waveguide tube and precise positioning of the flange interface. Operation of the sliding element is by a push/pull mechanism and a locking screw is provided for repetitive measurements. High Power Loads Designs for a limited range of rectangular high power/medium power loads are available on request. SLIDING LOADS Standard Rectangular VSWR: Material: Load Material: Finish: See table (based on spot frequency Operation) Brass Iron Loaded Resin Blue Paint, Silver Plated Flanges Overall Power TWS PART NUMBER Length UK IEC E.I.A. V.S.W.R. Watts A (mm) WG R WR C.W SL 10 SQB- (***)-B A SL 11A SQB- (***)-B SL 12 SQB- (***)-B SL 13 SQB- (***)-B SL 14 SQB- (***)-B SL 15 SQB- (***)-B SL 16 SQB- (***)-B SL 17 SQB- (***)-B SL 18 SQB- (***)-B SL 19 SQB- (***)-B SL 20 SQB- (***)-B SL 21 SQB- (***)-B SL 22 SQB- (***)-B *** For 3 Digit Rectangular Flange part number, refer to the 1999 Catalogue, or consult the factory.
3 FIXED LOADS Standard Rectangular Body Material: Load Material: Finish: Brass Iron Loaded Resin Blue Paint, Silver Plated Flanges Overall Power TWS PART NUMBER Length UK IEC E.I.A. V.S.W.R. Watts A (mm) WG R WR C.W FL 10 SQB- (***)-B A FL 11A SQB- (***)-B FL 12 SQB- (***)-B FL 13 SQB- (***)-B FL 14 SQB- (***)-B FL 15 SQB- (***)-B FL 16 SQB- (***)-B FL 17 SQB- (***)-B FL 18 SQB- (***)-B FL 19 SQB- (***)-B FL 20 SQB- (***)-B FL 21 SQB- (***)-B FL 22 SQB- (***)-B *** For 3 Digit Rectangular Flange part number, refer to the 1999 Catalogue, or consult the factory. FIXED LOADS Double Ridge Body Material: Load Material: Finish: Aluminium Alloy Iron Loaded Resin Blue Paint, Chromated / Iridited Aluminium Flanges TWS Part Number V.S.W.R. Power Watts C.W. Overall Length A (mm) WRD475 D24 FL 475 SQH- (***)-A WRD580 D28 FL 580 SQH- (***)-A WRD650 D28 FL 650 SQH- (***)-A WRD750 D24 FL 750 SQH- (***)-A WRD180 C24 FL 180 SQH- (***)-A *** For 3 digit Double Ridge Flange Part number, please consult the factory. Various lengths available on request.
4 HIGH POWER FIXED LOADS Standard Rectangular Pressurisation: Up to 50psi if required (please specify) Body Material: Brass/Aluminium Alloy Tube/ Aluminium Alloy Load Material: Silicon Carbide Finish: Matt Black Paint / Chromated / Iridited Aluminium Flanges Fin designs are available for horizontal and vertical mounting and with power ratings of 400 and 800W. Please consult the factory for mounting brackets and higher power ratings. TWS PART NUMBER V.S.W.R. UK IEC E.I.A. WG R WR FL 10 HBH- (***)-B A FL 11A HBH- (***)-B FL 12 HBH- (***)-B FL 13 HBH- (***)-B FL 14 HBH- (***)-B FL 15 HBH- (***)-B FL 16 HBH- (***)-B FL 17 HBB- (***)-B FL 18 HBB- (***)-B FL 20 HBB- (***)-B FL 22 HBB- (***)-B 1.1 *** For 3 Digit Rectangular Flange part number, refer to the TWS Flange catalogue, or consult the factory.
5 LOAD TERMINATIONS The Solution offers standard and custom Load Terminations. All designs have been optimised to offer high performance within a compact outline. Contact our Sales Department for more information.
6 Ordering Information FL 16 S Q B 402 B MATERIAL A= ALUMINIUM (STANDARD FOR DOUBLE RIDGE WAVEGUIDE) FLANGE TYPE SELECT THE REQUIRED FLANGE BY SELECTING THE LAST 3 DIGITS OF THE TWS FLANGE PART No.Eg. 402= UBR FLANGE FINISH Z = UNPLATED (OPTIONAL NON STANDARD) H = CHROMATE F = IRIDITE A = TIN PLATE (OPTIONAL FOR BRASS MATERIAL) B = SILVER PLATE (STANDARD FOR BRASS MATERIAL) PAINT Q = TWS BLUE (STANDARD FOR S AND E TYPES) B = BLACK (STANDARD FOR H TYPE, OPTIONAL FOR S AND E TYPES) G = GREY (OPTIONAL NON-STANDARD TYPE T = HIGH POWER (RECTANGULAR WG ONLY) (On request) S = STANDARD WAVEGUIDE SIZE USE THE BRITISH WG SIZE FOR RECTANGULAR WAVEGUIDE or THE MIL SPEC. WRD SIZE FOR DOUBLE RIGDE WAVEGUIDE E.g. 16= WAVEGUIDE SIZE WG = WRD750 PRODUCT CODE FL = FIXED LOAD SL = SLIDING LOAD Notes: 1) The flange material should match the material of the device to remain standard. For assistance selecting RoHS compliant options please contact the factory
Waveguide Directional Couplers. Cross Guide Couplers CC SERIES
Directional Couplers Cross Guide Couplers CC SERIES Broad Wall Couplers Side Wall Couplers DC SERIES SC SERIES CROSS GUIDE COUPLERS (3PORT) Coupling Values: Nominal Coupling Values Accuracy V.S.W.R. 20
Waveguide Flanges. Rectangular Flanges. Double Ridge Flanges F-D SERIES
Waveguide Flanges Rectangular Flanges F SERIES Double Ridge Flanges F-D SERIES Materials Aluminium (Shown in blue type) Brass (Shown in black type.) Codes RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR
Section 3. Rotary Joints. Introduction
Section Rotary Joints Introduction For more than forty years, MDL has produced waveguide rotary joints and is one of the major suppliers in both domestic and overseas markets. Many of the larger military
FERRITE PRODUCTS TABLE OF CONTENTS
FERRITE PRODUCTS TABLE OF CONTENTS No. B002i SERIES FERRITE PRODUCTS Rectangular Waveguide Circulator 3 Port Junction Design 140 T173 Rectangular Waveguide Circulator 4 Port Differential Phase Shift Design
HBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
SERIES TAP-CHANGER
SERIES 090 - TAP-CHANGER Main characteristics This is an off-circuit tap changer. It means DO NOT OPERATE WHILE THE TRANSFORMER IS ENERGISED. Main characteristics of this tap-changer series are: dimensional
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
Section 16. Short Slot Hybrids. Theory
Section Short Slot Hybrids Theory FIGURE 1 COUPLER TERMINOLOGY Coupling = Ratio A to C Balance = Ratio B to C Directivity = Ratio C to D Isolation = Ratio A to D Isolation = Coupling + Directivity PHASE
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors
WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors Size 2010, 1206, 0805, 0603 Page 1 of 7 WFxxM Trimmable_V11 Apr.2010 FEATURE 1. Reduced size of final equipment 2. Lower assembly
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
GT Range. Rack & Pinion Actuators for Rotary Valve Control. Keeping the World Flowing
GT Range Rack & Pinion Actuators for Rotary Valve Control Keeping the World Flowing Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
PAGE# PAGE# PAGE# ADAPTERS * ROTARY JOINTS. * I Style 23 Broadwall 36 * L Style 24 Crossguide 37
MICROTECH, INC STANDARD COMPONENTS PRODUCT INDEX DOUBLE RIDGED COMPONENTS PAGE# PAGE# PAGE# ADAPTERS PRESSURE INLETS * ADAPTERS ARC DETECTORS W/G to Coax 28 PRESSURE WINDOWS 21 W/G to Coax 12 PRESSURE
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
STAF-SG. ANSI flanges. Balancing valves Size 3/4-16
STAF-SG ANSI flanges Balancing valves Size 3/4-16 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating
WR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402
WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page
GT Range. Rack & Pinion Actuators for Rotary Valve Control. Keeping the World Flowing
GT Range Rack & Pinion Actuators for Rotary Valve Control Keeping the World Flowing Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
NH DIN Dual Indication Fuse Links
Class gg/gl, 400Vac, 2 to 630 Amps, Sizes 000 to 3 Standards/Approvals IEC 60269, VDE 0636, DIN 43620 Part 1 and 3 Description A square bodied range of industrial fuse links for a wide variety of applications.
Class gg/gl, 690Vac, 2 to 500 Amps, Sizes 000 to 3 NH Series
Description: A range of Class gg/gl square bodied industrial fuse links for a variety of applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhg(size)b-690 gg/gl Fuse Size: 000 to
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_TR_V02 Jul -
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
Section 5. Directional Couplers. Introduction
Section Directional ouplers Introduction t MDL, directional couplers have always received the engineering and manufacturing attention due a major component. wide variety of types are offered, often tailored
PLEATED BLIND. SL20S plissé. SL22S plissé. ScreenLine. Technical Catalogue. english. double-glazed unit 20 mm 22 mm
SLS plissé SL22S plissé PLEATED BLIND english Technical Catalogue double-glazed unit mm 22 mm dimensions technical specification SLS SL22S plissé System S 2 S SLS plissé SL22S plissé The pleated blind
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
GT Range. Rack & Pinion Actuators for Rotary Valve Control. Keeping the World Flowing
GT Range Rack & Pinion Actuators for Rotary Valve Control Keeping the World Flowing Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
Product Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
IP66 GSW GEAR BOX MOTOR SERIES
IP66 GSW GEAR BOX MOTOR SERIES Three Phase Aluminium Gear Box Motors Australian Version October 2013 CONTENTS INTRODUCTION Pg 3 MATERIALS AND CONSTRUCTION Pg 3-4 SERIES OVERVIEW Pg 5 PERFORMANCE DATA Pg
NH DIN Dual Indication Fuse Links Class am, 690Vac, 6 to 500 Amps, Sizes 000 to 3 NH Series
Description: A range of Class am square bodied industrial fuse links for a wide variety of motor protection applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhm(size)b-690 am
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
TVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
WF06P 5% High power chip resistors Size 0603, 1/8watt
SPECIFICATION OF HIGH POWER CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF06P 5% High power chip resistors Size 0603, 1/8watt Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION
PED 97/23/EC ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
PED 97/23/EC ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. 5. - 5 Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and
AIR TRIMMER CAPACITORS MINIATURE, STANDARD & HIGH VOLTAGE
Description Air dielectric Rated voltage 250 VDC (500 VDC for AT 500 s) Low temperature coefficient Low capacitance drift Very stable over time Terminations gold plated High Q factor Multi-turn, high resolution
ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
Air Trimmer Capacitors Miniature, Standard & High Voltage Series
DESCRIPTION Air dielectric Rated voltage 250 VDC (500 VDC for AT 500 s) Low temperature coefficient Low capacitance drift Very stable over time Terminations gold plated High Q factor Multi-turn, high resolution
Features. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures. Built-in electrical components
E X - D D I S T R I B U T I O N S with metal EJ enclosures for gases in explosion group IIB Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures.
EXTRUDED HEAT SINKS FOR POWER SEMICONDUCTORS
EXTRUDED HEAT SINS FOR POWER S 621 AND 623 Low-Profile for All Metal-Case Power Semiconductors Footprint Thermal Performance at Typical Load Standard Dimensions Height Mounting Natural Forced Weight P/N
Part Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
High Power Chip Resistors Size W, W, /2W
WF25P, WF20P, WF12P ±1%, ±5% 0Ω,1Ω~1MΩ High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25P, WF20P, WF12P, Ver.8 Jul.2010
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WW25X Version 06 Jul.-2004 FEATURE 1. High power rating and compact size 2.
1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Gas Insulated Switchgear
Gas Insulated Switchgear Your partner in energy solutions CG Electric Systems Hungary CG Electric Systems Hungary (previously known as Ganz Electric) has a history of over a 130 years as a high technology
SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
STANDARD PRODUCT OVERVIEW EMC FILTERS FOR MILITARY VEHICLES STANDARD EMC FILTERS FOR MILITARY VEHICLES FILTER SELECTION PROCESS. Introduction CONTENTS
STANDARD PRODUCT OVERVIEW EMC FILTERS FOR MILITARY VEHICLES STANDARD EMC FILTERS FOR MILITARY VEHICLES Introduction This brochure covers a standard range of cost effective MOTS (military-off-the-shelf)
Modular Max AGM Range VRLA
Innovative Features Valve Regulated Lead Acid (V.R.L.A.) design Fully tank formed plates Never needs addition of water Spill-proof and leak-proof Proprietary Fixed Orifice Plate Pasting technology applying
Premium Stainless Steel Liquid Filled Gauge
Premium Stainless Steel Liquid Filled Gauge PFP 1 Description & Features: Liquid fi lled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel
mm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
C310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses
Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,
Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
Anaconda IECEx-ATEX cable-hosefitting, type BXA, nickel plated brass.
NOND TX ITTINGS naconda Ix-TX cable-hosefitting, type X, nickel plated brass. The Ix-TX approved barrier fi ttings type X are developed to protect several loose wires with a liquidtight fl exible metal
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
HERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
C308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
Ecospot LED floodlights
Ecospot LED floodlights Design: Roy Fleetwood Ecospot is a floodlight series which was designed specifically for LEDs. They offer extremely narrow beam light distribution with very little scattered light
High RF (HiRF) EMC Solutions Overview
EMC Solutions HiRF s High RF (HiRF) EMC Solutions Overview Q par Angus Ltd have teamed up with TMD Technologies Ltd to produce a range of unrivalled antenna and amplifier solutions that exceed the latest
Compact differential pressure switch Models DC, DCC
Mechatronic pressure measurement Compact differential pressure switch Models DC, DCC WIKA data sheet PV 35.40 Process Compact Series Applications Differential pressure monitoring and control of processes
WF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V
CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...
Microwave Isolators and Circulators
Microwave Isolators and Circulators 24 HOUR SHIPPING ON IN-STOCK ITEMS Single Junction Octave/Broadband Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power
SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
Performance Literature for J125 Gas Pressure Regulators 1½ and 2 Sizes. Catalogue
Catalogue and Performance Literature for J125 Gas Pressure Regulators 1½ and 2 Sizes Catalogue General Information Regulating Capacity Capacity Figures 1½ size Capacity Figures 2 size CS2503D DS2501B DS2502B
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors. Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
LHBIP LED High Bay High Performance
LED High Bay High Performance APPLICATION The LHBIP LED is a high efficiency I-Beam style high bay fixture engineered for premium performance. A precision-formed silver reflector is designed to achieve
ALUMINIUM GEAR UNITS WITH SMOOTH MOTORS kw
Intelligent Drivesystems, Worldwide Services ALUMINIUM GEAR UNITS WITH SMOOTH MOTORS 0.12 1.1 kw EN PRODUCT CATALOGUE TI60-0002 THE ADVANTAGES OF ALUMINIUM GEAR UNITS Information Corrosion Resistant Aluminium
Modular Max Range BATTERY SOLUTIONS. NEBS qualified. Reliable capacities. EverExceed power your applications
EverExceed power your applications Modular Max Range BATTERY SOLUTIONS NEBS qualified Reliable capacities CADMIUM FREE FULLY RECYCLABLE LEAD ACID BATTERIES CONFORMS TO THE EUROPEANE.C.1992 DIRECTIVE ON
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
Load Break Switch Type LBOR-II, Oil Immersed PTAT-LIR975 IZUA Technical Guide Nut Mount Weld Mount
Load Break Switch Type LBOR-II, Oil Immersed PTAT-LIR975 IZUA 5321-100 Technical Guide Nut Mount Weld Mount General Description The ABB Type LBOR-II switch is a manually operated, two position, load make
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment