Its not just any pendant; its a resilient, hardened rubber station seasoned with over 30 years of industrial use and innovation.
|
|
|
- Irma Anthony
- 6 years ago
- Views:
Transcription
1 Its not just any pendant; its a resilient, hardened rubber station seasoned with over 30 years of industrial use and innovation. Put Your Crane on Target with a SPOTTER Pendant Station!
2 Page 2 TABLE OF CONTENTS SPOTTER MINI SERIES PENDANTS AND PARTS PAGES 3-5 SPOTTER SERIES C PENDANTS AND PARTS PAGES 6-11 CABLE AND CORD GRIPS PAGE 12 PLEASE CALL FOR PRICING ON: PENDANTS WITH HERMETICALLY SEALED CONTACTS ANY SPECIAL APPLICATIONS PENDANT STATIONS WITH OIL TIGHT INSERTS DUAL SIDE BY SIDE PENDANTS SOLUTIONS
3 Spotter Mini Series Pendants Page 3 All Pendants are priced with On/ Off Toggle Switch. See Below for Adders for Mushroom On/Off and other options Eight Button Single Speed $ Two Speed $ Six Button Single Speed $ Two Speed $ Four Button Single Speed $ Two Speed $ Build price for a mix - of single and two speed motions - by reducing two speed price by $40.00 for each single speed motion. Enclosures Only 8MX-00 $ MX-00 $ MX-00 $ Mini Series Accessories/Spares Many other options also available. Cord Grips are NOT included See page 12 Part# Description Adder $ Individual $ 22-EMPP-MAINT Maintained Mushroom $14.00 $ SEL-2POS 2 Position Selector 1 N.O. $10.00 $ SEL-3POS 3 Position Selector 2 N.C. $16.00 $ CB-XEN 2 Speed Contact Block N/A $ CB-XENSS Single Speed Contact Block N/A $ OPER-XENBLK MTG-XEN Operator for Contact Block Mounting Bracket for Pair of Contacts N/A $5.00 N/A $12.00 Operator Contact Block Assembly Cross Section
4 Spotter Mini Series Replacement Parts Page 4 Front Cover Assy. Consists of: Top Adapter, Switch Plate, and Rubber Front. C-101-4mini 4 Button Front Assy. $ C-101-6mini 6 Button Front Assy. $ C-101-8mini 8 Button Front Assy. $ C-103-4mini 4 Button Back Only $48.00 C-103-6mini 6 Button Back Only $50.00 C-103-8mini 8 Button Back Only $55.00 Standard Mini Series Nameplates C mini Hoist Up Dwn $7.00 C mini Trolley Fwd Rev $7.00 C mini Trolley North South $7.00 C mini Trolley East West $7.00 C mini Trolley Left Right $7.00 C mini Bride Fwd Rev $7.00 C mini Bridge North South $7.00 C mini Bridge East West $7.00 C mini Power On Off $7.00 C mini Special Nameplate Specify $10.00 C-118-1mini Toggle On Off $5.00 C-118-3mini Toggle Closing Plate $5.00 Toggle T-1 Toggle Switch $12.95
5 Page 5 Spotter Mini Series Single or Two Speed Switch Assembly Ref. # Part # Description Qty per Motion 1 MTG-XEN Contact Mounting Bracket 1 $ MINI-131 Nameplate Screw 2 $ C-111-XXmini Nameplate 1 $ NUT-ACORN632 Acorn Nut 2 $ Oper-XENBLK Operator 2 $ Included with 5 Operator Nut 2 N/A 7 22-CB-XEN 2 Speed Contact 2 $ CB-XENSS 1 Speed Contact 2 $35.00 Electrical Ratings: Nema A600-Q600 Two Speed Accumulating Contacts. Electrical Interlocking via NC Contacts. Two Speed Contacts have distinct Pressure Speed Points. This is the Standard Switch Supplied in the Spotter Mini Series $
6 Spotter Series C Pendants Page 6 Accessories Not Included in Price. See below for Adders. Mushrooms, Selectors, etc. Eight Button Single Speed $ Two Speed $ Six Button Single Speed $ Two Speed $ Four Button Single Speed $ Two Speed $ Adder To Single Speed Price for a Pair of Five Speed Switches SW-151-5B 3-5 Speed AC $75.00 SW-5 Heavy Duty AC/DC 3-5 Speed Copper and Silver Plated Switch $ Adder Included in Above Two Speed Price is $ per Pair for an SW-2 Switch that is Cumulative or Make Before Break Part # Description Adder Price Indv. Price 30-Sel-2Pos 2 Position Selector 1 N.O. $57.00 $ Sel-3Pos 3 Position Selector 2 N.C. $69.00 $ EMPP-Maint Maintained Mushroom $ $ BC-101 Black Boot for SW-1 & SW2 N/A $3.50 BC-101G Green Boot N/A $3.50 BC-101R Red Boot N/A $3.50 BC-102 Boot for 3-5 Speed Switch N/A $4.00
7 SPOTTER C SERIES REPLACEMENT PARTS Page 7 REF PART DESCRIPTION QUANTITY PER ENCLOSURE PRICE 1,3,4 C FRONT COVER ASSY. 4-BUTTON 1 $ C FRONT COVER ASSY. 6-BUTTON 1 $ C FRONT COVER ASSY. 8-BUTTON 1 $ C FOUR BUTTON BACK 1 $ C SIX BUTTON BACK 1 $ C EIGHT BUTTON BACK 1 $ C-107 TOP FITTING (1" FEMALE PIPE THD) N/A NAMEPLATES 5 C NAME PLATE HOIST UP DWN $5.00 C NAME PLATE TROLLEY FWD REV $5.00 C NAME PLATE TROLLEY NORTH SOUTH $5.00 C NAME PLATE TROLLEY EAST WEST $5.00 C NAME PLATE TROLLEY LEFT RIGHT $5.00 C NAME PLATE BRIDGE FWD REV $5.00 C NAME PLATE BRIDGE NORTH SOUTH $5.00 C NAME PLATE BRIDGE EAST WEST $5.00 C NAME PLATE START STOP $5.00 C NAME PLATE ON-OFF $5.00 C NAME PLATE BLANK (NO LEGEND) $5.00 C SPECIFY LEGEND 20 SPACES MAXIMUM $ C-114 STAND OFF TUBE $ C TOGGLE NAME PLATE OFF-ON $ C TOGGLE CLOSING PLATE W/ATTACH HARDWARE $ BC-101 BOOT FOR SW-1 & SW-2 SWITCHES $ BC-102 BOOT FOR SW-5 SWITCH $ C-130 C-107 ATTACH SCREW $ C-131 C-111 ATTACH SCREW $ C-132 C-103 ATTACH SCREW $ C-133 FLAT WASHER # $ C-134 GROUND ATTACH SCREW $ C-135 GROUND WIRE TERMINAL $0.15
8 Page 8 SPOTTER C SERIES SINGLE SPEED SWITCH REF PART DESCRIPTION QTY PER UNIT UNIT PRICE 1 SW-1 SINGLE SPEED INSERT 1 $ BC-101 PROTECTIVE BOOT 2 $ SW-20 MOUNTING SCREW 2 $2.00 IMPORTANT: NOTE THAT BUTTON CONTROLS CONTACT AT OPPOSITE END OF SWITCH. BE SURE HOIST CONNECTIONS ARE CORRECT. Rated 120V - 10A AC. Stainless steel contacts, high-density PVC body and push buttons. Design provides positive interlocking without the necessity for jumper wires.
9 SPOTTER C SERIES TWO SPEED SWITCH Page 9 REF PART DESCRIPTION QTY PER UNIT PRICE EA. 1 SW-2 TWO SPEED INSERT 1 $ BC-101 PROTECTIVE BOOT 2 $ SW-20 MOUNTING SCREW 2 $2.00 RATED 120V - 10 A AC. Similar to single speed switch, but with added two speed contacts. Switch operation is either "break-before-make" or "accumulating" second speed control. CONTACT "L" BREAKS BEFORE "H" MAKES. CONTACTS "1" OR "2" AND "H" ACCUMULATE. INSTRUCTIONS: UNITS WIRED FOR ACCUMULATING CONTACTS CONNECT FWD (UP) TO THE TERMINAL MARKED "1" CONNECT REV (DWN) TO THE TERMINAL MARKED "2" CONNECT SECOND SPEED WIRE TO TERMINAL MARKED "H" UNITS WIRED FOR "BREAK BEFORE MAKE" CONNECT FWD (UP) TO THE TERMINAL MARKED "1" CONNECT REV (DWN) TO THE TERMINAL MARKED "2" CONNECT LOW SPEED WIRE TO TERMINAL MARKED "L" CONNECT HIGH SPEED WIRE TO TERMINAL MARKED "H" ALWAYS CONNECT THE CONTROL COMMON TO TERMINAL MARKED "C" IMPORTANT: NOTE THAT BUTTON CONTROLS CONTACT AT OPPOSITE END OF SWITCH. BE SURE HOIST CONNECTIONS ARE CORRECT.
10 Page 10 SPOTTER C SERIES 3-5 SPEED CUMLATIVE AC SWITCH REF PART N0. DESCRIPTION QTY Price REQUIRED 1 SW MULTIPLE SPEED INSERT 5-STEP MAXIMUM 6 AMPS CONTINOUS, 8 AMPS INTERMITENT, 125V AC, 250V MAXIMUM 1 $ SW-151-5B MULTIPLE SPEED INSERT 5-STEP MAXIMUM 6-AMPS CONTINOUS, 8 AMPS INTERMITENT, 125V AC, 250 V MAXIMUM (WITH MECHANICAL INTERLOCK) 1 $ ,6 C-161 ATTACH LUG W/NUT 2 Included with switch 5 MS NAMEPLATE ATTACH SCREW 2 Included with switch 3 BC-102B PROTECTIVE BOOT 2 $4.00
11 Page 11 SPOTTER C SERIES HEAVY DUTY CUMLATIVE AC/DC 3-5 SPEED SWITCH REF. PART DESCRIPTION 1 SW-5 MULTIPLE SPEED SWITCH THREE TO FIVE STEP QUANTITY UNIT PRICE PER UNIT 1 CALL 2 BC-102 BOOT 2 $ SW-22 MOUNTING SCREW 4 $0.10 Rated 120V - 15A AC, 230V - 3A DC.
12 FLEXIBLE PENDANT CABLE - RUGGED HEAVY Page 12 DUTY THERMAL PLASTIC Purchase Cable, Cord Grip and Warning Label with any Pendant and we will pre-wire cable to pendant for additional $35.00 OSHA Required Warning Label $7.00 Round Pendant Cable with External Strain Relief Cable 08-16SR 8 Conductor # OD PROX. $3.70/ ft. Cable 12-16SR 12 Conductor #16.55 OD PROX. $4.00/ ft. Cable 16-16SR 16 Conductor # OD PROX. $4.70/ ft. Cable 24-16SR 24 Conductor # OD PROX. $7.00/ ft. Standard Cord Grips Cable Diameter Range CG $13.70 CG $13.70 CG $13.70 CG $16.55 CG $16.55 Kellem s Grips with Wire Mesh Strain Relief Kellems $84.00 Kellems $84.00 Kellems $84.00 Kellems $84.00
Electromotive Systems SBP2 Pendant Pushbutton Stations
Electromotive Systems SBP2 Pendant Pushbutton Stations STANDARD FEATURES All SBP2 pendant pushbutton stations include the following features: 1 Cable grip clamps provide a watertight sealed connection
PITNEY BOWES FLEXIBLE INK JET TRANSPORT 36 FIT BASE: FIT-36. Parts Manual. (BOM: FIT36rev1.0) FIT-36parts_rev0 1
FLEXIBLE INK JET TRANSPORT 36 FIT BASE: FIT-36 Parts Manual (BOM: FIT36rev1.0) FIT-36parts_rev0 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company
PITNEY BOWES FLEXIBLE INK JET TRANSPORT 56 FIT BASE: FIT-56. Parts Manual. (BOM: FIT-56revA) FIT-56parts_rev0 1
FLEXIBLE INK JET TRANSPORT 56 FIT BASE: FIT-56 Parts Manual (BOM: FIT-56revA) FIT-56parts_rev0 1 VERSION HISTORY The table below summarizes the history of this document as it is published onto the company
SBP2 Pendant Pushbutton Stations Installation Instructions
SBP2 Pendant Pushbutton Stations Installation Instructions P.O. Box 13615 Milwaukee, WI 53213-3615 Phone: 262-783-3500 Fax: 262-783-3510 Toll free Phone (in USA): 800-288-8178 Toll free Fax (in USA): 800-298-3503
PARTS BREAKDOWN FOR HIGH AND LOW SPEED GEAR ASSEMBLIES
PARTS BREAKDOWN FOR HIGH AND LOW SPEED GEAR ASSEMBLIES Refer to sketches on previous page. ITEM PART NUMBER DESCRIPTION QTY 120 GK-166-169 LOW SPEED GEAR TRAIN ASSEMBLY (ITEMS 121 TO 127) 121 GK-166-171
SERVICE AND REPAIR PARTS
Hubbell Industrial Controls, Inc Type PBC, WPBC, XPBC Pushbutton Stations August 2013, Replaces April 2013 SERVICE AND REPAIR PARTS Series 2015 Type PBC pendantmounting pushbutton stations are designed
JAMISON-B.M.P. INDUSTRIAL RAPID DOORS Frigo 2 Replacement Parts List
JAMISON-B.M.P. INDUSTRIAL RAPID DOORS Frigo 2 Replacement Parts List JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21741 USA 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL:
Carpetriever 28 PARTS LIST MODELS (120V), (OBS/100V) 11/1999 revised 2/2016 FORM NO REV C
Carpetriever 28 PARTS LIST MODELS 56330020(120V), 56330925(OBS/100V) 11/1999 revised 2/2016 FORM NO. 56042384 REV C 4/2009 TABLE OF CONTENTS PARTS LIST DESCRIPTION PAGE Base System... 2-3 Brush Motor
Illustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
PITNEY BOWES Sure-Feed Engineering SURE JET MODEL SJVB - TUV. Parts Manual. SJVB-TUVparts 1
SURE JET MODEL SJVB - TUV Parts Manual SJVB-TUVparts 1 TABLE OF CONTENTS SURE JET- SJVB-TUV SURE JET VACUUM BASE ASSEMBLY (FIG. 1)..... 5 FRAME ASSEMBLY (FIG. 2). 7 CONVEYOR DRIVE ASSEMBLY (FIG. 3).. 9
Provides the convenience of pre-fabricated bracing and bridge beam accessories.
Harrington Beam Accessory Kits Provides the convenience of pre-fabricated bracing and bridge beam accessories. For use with any Harrington end truckspecify end truck model when ordering. Kit includes:
Illustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
SERVICE and REPAIR PARTS PENDANT PUSHBUTTON STATIONS EUCLID TYPE PBC, WPBC, XPBC
INSTRUCTIONS 2015/16/17 Publication No. 128 Sept. 2009 Hubbell Industrial Controls, Inc. Repl. May 1986 SERVICE and REPAIR PARTS PENDANT PUSHBUTTON STATIONS EUCLID TYPE PBC, WPBC, XPBC Series 201 5 Type
Optional Bullard Hook* with return latch, with or without return spring, for added safety.
Standard Top Hook with safety latch-rigid (standard) or swivel. Optional Bullard Hook* with return latch, with or without return spring, for added safety. Optional Shur-Loc Hook* with positive lock latch
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS SURE JET VACUUM BASE SJVB SURE JET VACUUM BASE SJDB-EXT Parts Manual SJ_EFS-PARTSBOOK051507reva 1 TABLE OF CONTENTS ENVELOPE FINISHING SYSTEM- SURE JET EFS-SURE
PRODUCT INFORMATION BULLETIN
724-283-4681 724-283-5939 (fax) PRODUCT INFORMATION BULLETIN DESCRIPTION The, Model 10-7100 is one in a series of critical speed switches that monitor speed and detect motion in all types of machinery
ELITE SERIES SURGICAL TABLES
Page 39 Item Part No. Description Qty. ELITE SERIES SURGICAL TABLES PARTS CATALOG MODEL ELITE 3500 Page 1 Item Part No. Description Qty. INTRODUCTION This manual contains the exploded views and replacement
EXTRA PRICES XTRA-0312 EFFECTIVE: ALL PRICES IN U.S. DOLLARS
EFFECTIVE: 3-19-2012 ALL PRICES IN U.S. DOLLARS EXTRA PRICES 140 JOHN JAMES AUDUBON PARKWAY AMHERST, NEW YORK 14228-1197 800/888-0985 716-689-5400 FAX: 716/689-5644 www.cmworks.com EXTRA PRICES ELECTRIC
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
GU 700A PARTS LIST. 11/99 revised 8/10 FORM NO MODELS (240V), (240v-60hz) (OBS/240V/Arg.), (OBS/100V)
PARTS LIST MODELS 5633090(240V), 56330049(240v-60hz) 56330940(OBS/240V/Arg.), 5633095(OBS/00V) /99 revised 8/0 99-09-4 TABLE OF CONTENTS DESCRIPTION PAGE Base System... 2-3 Brush Motor Assembly... 4-5
PARTS ST , A, B STX , A, B. Airless Paint Sprayers. Rev. B
PARTS ST 234127, A, B 309715 Rev. B STX 234126, A, B Airless Paint Sprayers 3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure Related manuals ti5875a 234127....... 309710....... 309060; ST....... 309053;
Hazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
140P-2674 AND LATER 175P-4023 AND LATER 250P-2783 AND LATER
SERIAL NUMBERS 140P-2674 AND LATER 175P-4023 AND LATER 250P-2783 AND LATER FORM WC5310 3/95 (Rev. 9/97, 6/99, 1/00, 2/00) Systematics, Inc. 1025 Saunders Ln. West Chester, Pa. 19380 TABLE OF CONTENTS VIEW
5500 Series compact pistol grip station 5500/5600 Series single, dual & variable speed stations 5700 Series rubber enclosure pendant stations
5500 Series compact pistol grip station 5500/5600 Series single, dual & variable speed stations 5700 Series rubber enclosure pendant stations Introduction ricson Manufacturing Company provides single,
Carpetriever 28 PARTS LIST MODELS (120V), (OBS/100V) 11/99 revised 12/12 FORM NO
PARTS LIST MODELS 56330020(120V), 56330925(OBS/100V) 11/99 revised 12/12 99-11 09-4 TABLE OF CONTENTS 1 DESCRIPTION PAGE Base System... 2-3 Brush Motor Assembly... 4-5 Decal System... 6-7 Handle System-1
recognized as the best in the industry for over 115 years. Each component is designed with greater innovation and manufactured with higher
0-0_q_K //0 : PM Page C R A N E C O M P O N E N T S TM TM THERE S A CRANE SOURCE COMPONENT FOR EVERY JOB. CraneSource crane bridge components have been recognized as the best in the industry for over years.
909/1 SERIES SLICER TECHNICAL MANUAL
The Choice of Experience 909/1 SERIES SLICER TECHNICAL MANUAL SPECIFICATION SHEET INSTALLATION INSTRUCTIONS OPERATION INSTRUCTIONS CLEANING INSTRUCTIONS MAINTENANCE INSTRUCTIONS TROUBLE SHOOTING INSTRUCTIONS
dv Sentry TM 208V 600V INSTALLATION GUIDE Quick Reference ❶ How to Install Pages 6 14 ❷ Startup/Troubleshooting Pages WARNING
dv Sentry TM 208V 600V INSTALLATION GUIDE FORM: DVS-IG-E REL. January 2018 REV. 003 2018 MTE Corporation High Voltage! Only a qualified electrician can carry out the electrical installation of this filter.
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
Index. Flexcor Wire Mesh Grips K-1
Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord
7401 Micro-Jet Fogger
7401 Micro-Jet Fogger parts price list & order FORM 1. Select parts (see drawing over) and quantities. Shipping costs and sales taxes if applicable will be added to order subtotal. 2. Enter "Ship To Information"
GE Push Buttons. CRW4P Heavy-Duty Push Button Contact Blocks
CRW4P Heavy-Duty Push Button Contact Blocks CH104P Heavy-Duty Push Button Contact Blocks CR104P Heavy-Duty Push Buttons ~\ GE Push Buttons CRW4P Heavy-Duty Push Buttons 600 Volts Maximum AC/DC 10 Amperes
6309 Pow-R-Jet Fogger
6309 Pow-R-Jet Fogger parts price list & order FORM 1. Select parts (see drawing over) and quantities. Shipping costs and sales taxes if applicable will be added to order subtotal. 2. Enter "Ship To Information"
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
Main Components. Bevel Gear and Related Parts. Rack and Pinion Assembly No. A Drain Cleaning Machine K-50
Drain Cleaning Machine K-0 Main Components 0 NOTE: Order parts by Catalog Number only. Screw () 00 Screw () 00 Cord with GFCI Cord (Europe) Strain Relief Strain Relief (Europe) Insulating Motor Gasket
Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. Pendants - pg.
Power Control Center PENDANT FUNCTION In event multiple buttons are depressed for seconds, the power pump will shutdown. TO RESTART PUMP Press the On button to restart. If problem persists, unplug the
Spare Parts List. ( , , ) Dominator 500 PSI-13 Gallon
Spare Parts List (1.00-5.0, 1.00-.0, 1.00-9.0) Dominator 500 PSI-13 Gallon From Serial Number (Ref No. 1*) * See Serial Number page or call manufacturer 839900-D 12/05/1 How to Use this Spare Parts List
**Finish/color code must be specified when ordering.
K# Pump Pump Switch Bracket w/heater Control Retrofit Kit 84-**-AA 60910 30775 67969 N/A 0460 84-**-AB 60910 30775 67969 N/A 0460 84-**-AC 60910 30775 90989 N/A 0460 84-H-**-AA 60910 30774 67969 External
A DIVISION OF DOUGLAS DYNAMICS, L.L.C.
April, 00 Lit. No. 0686, Rev. 05 SPEEDWING Snowplow 8600SW Snowplow Parts List A DIVISION OF DOUGLAS DYNAMICS, L.L.C. Lit. No. 0686, Rev. 05 April, 00 BLADE COMPONENTS... OFF-TRUCK COMPONENTS...5 Pivot
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
Form No Parts List for: MODEL B ELECTRIC HYDRAULIC PUMP. Maximum Capacity: 10,000 PSI PE55TWP-IBT-115. Sheet No. 1 of 8
Parts List for: Form No. 1000457 PE55TWP-IBT-115 MODEL B ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI 1 2 3 7 SPX Hydraulic Technologies, Rockford, IL 61109 USA www.powerteam.com Made in USA 309219Rev7
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
Index. Flexcor Wire Mesh Grips K-1
Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord
**Finish/color code must be specified when ordering.
K# Pump Pump Switch Bracket w/heater Control Retrofit Kit 30-**-AA 60937 30775 67793 N/A 500460 30-**-AB 60910 30775 90986 N/A 500460 30-H-**-AA 60937 30774 67793 External 500460 30-H-**-AB 60910 30774
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
Illustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
Features. Track Length System Length Storage Length. Active Travel. System Depth Loop Depth Tow Trolley. Intermediate Trolley
Magnetek s Electromotive Systems Mill Duty I-Beam Festoon Systems efficiently and economically deliver power and control to cranes used in a variety of severe industrial environments. Features Capacity
MOTIV-8 FLEXIBLE CABLE SYSTEMS
MOTIV-8 FLEXIBLE CABLE SYSTEMS www.conductix.com.au CONDUCTIX FLEXIBLE CABLE SYSTEMS Designed and manufactured in Australia. Proven in applications throughout the world for over 25 years. Full range of
Rotary Cam Switches. Rotary Cam Switches
Rotary Cam es Series... 2 Handle Assemblies... 8 Accessories... 12 Circuit Diagrams, Technical Information & Dimensions (Online)... 13 Series R-Line Rotary Cam es... 24 Handles and Accessories... 27 Circuit
Euclid DC Crane Controllers Catalog Price List 4100 April 2007 Page 1
Catalog Price List 4100 April 2007 Page 1 4110/4120 Travel Controllers 4110/4120 Travel Controllers provide reversing-plugging control of series or compound wound DC motors. the simple easy-tounderstand
Part Numbers for Brake Coils, Brake Assemblies, Rotors, Stators and Attaching Screws JJ-2, LL-2, RR-2, AND RRT-2. AA-2, C-2, F-2 and H-2
5 627-250 627-259 627-30 627-43 627-45 Part Name Electric Brake Assembly - Complete Brake Coil Drive Shaft & Pinion S/A (items 627-3 thru 627-35, as applicable) Rotor & Shaft Assembly Stator 0--50 5--60
SPEEDWING Snowplow. Model 8600SW Blade Crate Assembly Big Box Assembly Parts List
November 15, 013 Lit. No. 305, Rev. 0 SPEEDWING Snowplow Model 8600SW Blade Crate Assembly 5751 Big Box Assembly 5756 Parts List This Parts List is for BLIZZARD SPEEDWING snowplows with serial numbers
Customizing the Basic Control Handle
INTRODUCTION Customizing the Basic Control Handle Issued: July 999 The MCHXXX Control Handle is intended for use in openloop systems controlling Danfoss hydrostatic pumps with an Electrical Displacement
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
REPAIR J Line Driver Model 233725 U.S. Patent Number 6,883,633 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 10 mph (16 kph) Maximum Operating
PARTS. 190ES , A, B, C (Stand) , A, B (Stand) , A, B (Hi-boy) , A, B (Hi-boy) Airless Paint Sprayers. Rev.
PARTS 190ES 232900, A, B, C (Stand) 232901, A, B (Stand) 233797, A, B (Hi-boy) 233815, A, B (Hi-boy) Airless Paint Sprayers 309064 Rev. G 3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure Related manuals
TrynEx International, LLC, 531 Ajax Drive, Madison Heights, MI , POWER PLOW Snowplow
TrynEx International, LLC, 531 Ajax Drive, Madison Heights, MI 48071 49 www.snowexproducts.com January 15, 018 Lit. No. 531, Rev. 04 8100, 8611 POWER PLOW Snowplow Blade Assembly 77750, 77755 Big Box Assembly
Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.
2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G4 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - Rev. - A Date - 05/10 This illustration
SPEEDWING Snowplow. Model 8600SW Blade Crate Assembly Big Box Assembly Parts List
May 1, 01 Lit. No. 0686, Rev. 11 SPEEDWING Snowplow Model 8600SW Blade Crate Assembly 5750-1 Big Box Assembly 5755 Parts List This Parts List is for BLIZZARD SPEEDWING snowplows with serial numbers beginning
Sharpener Assembly Parts List
Sharpener Assembly Parts List Item Description Part Number sharpener assy. w/o cover 4675-00851 N/S sharpener assy. w/ cover assy. no upper guard 4675-00853 **sharpener assy. w/ cover assy. & upper guard
Youngstown Power Limit Switches
Class March, 2012 September, 2008 FRONTLINE AC CRANE CONTROL CLASS 6420 Youngstown Power Limit Switches CONTENTS Description Class Page General Information and Selection...... 2 Application Information.....
MR SERIES. One smooth operator. *MR Trolleys can only be used with ER Hoists.
SERIES One smooth operator. How do you move five tonnes across a factory floor safely and easily? Here s how: add an MR motorized trolley to your Kito ER electric hoist and you ll increase productivity
NOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
3203 PRX HW WITH HORN ADDENDUM
3203 PRX HW WITH HORN ADDENDUM OWNERS MANUAL Manual No. 320991038 Serial No. Mailing Address: P.O. Box 580697 Tulsa, OK 74158-0697 Physical Address: Phone 1-800-777-2760 Fax 1-888-848-5445 http://www.autocrane.com
Seismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
Pendant control stations 6
Characteristics For control circuits Environment Conformity to standards EN/IEC 0-- EN/IEC 00-, UL 0, CSA C- n EN/IEC 0-- and EN/ISO 0: 00 for versions with trigger action Emergency stop Protective treatment
Spare Parts List ( ) Mini Carpet Extractor
Spare Parts List (1.008-039.0) Mini Carpet Extractor From Serial Number (Ref No1*) *See Serial Number Page or call manufacturer 86401470-B 11/29/17 How to Use this Spare Parts List The PARTS LIST section
TCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
SERVICE SECTION. There's Always Something Cooking! Service, Parts, and Schematics For Reversible Pump Filter Systems. Covering Models RP-14 & RP-18
SERVICE SECTION There's Always Something Cooking! Service, Parts, and Schematics For Reversible Pump Filter Systems Covering Models RP-14 & RP-18 R Pitco Frialator, Inc, PO Box 501, Concord, NH 03302-0501
Section 10: Terminal Blocks
Terminal Blocks Section : Terminal Blocks CR151K Resilient Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...-2 Product Tables...-3, -4 Accessories...-3, -4 Technical Data...-5 Outlines
JARVIS. Model AST -101 STUNNER TESTER
Model AST -101 STUNNER TESTER EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page Stunner Tester, 115V... 4016004 Stunner Tester, 230V... 4016005 Notice to Employer and Safety Director... 2 Notice
SineWave Guardian TM 380V 600V INSTALLATION GUIDE. Quick Reference. ❶ How to Install Pages 6 17 ❷ Startup/Troubleshooting Pages WARNING
SineWave Guardian TM 380V 600V INSTALLATION GUIDE FORM: SWG-IG-E REL. October 2018 REV. 003 2018 MTE Corporation High Voltage! Only a qualified electrician can carry out the electrical installation of
Product Information Packet CHM364A .5HP,1140RPM,3PH,60HZ,48YZ,3418M,TEAO,F1
Product Information Packet CHM364A.5HP,1140RPM,3PH,60HZ,48YZ,3418M,TEAO,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
COMPACTOR & RAM ASSEMBLY
P1 P2 COMPACTOR & RAM ASSEMBLY FOR MODELS - ALL 5/02 Item Part Number Part Description Qty. 1 64--129 1--1/2 STD. Flat Washer 10 2 9121--1--8 Cylinder Pin, Base 1 3 60--608 1/4 DIA. x 2--1/2 Roll Pin --
Harrington Beam Accessory Kits. Options and Accessories: Consult Factory. Compliance
Harrington Beam Accessory Kits Provides the convenience of pre-fabricated bracing and bridge beam accessories. For use with any Harrington end truck specify end truck model when ordering. Kit includes:
User s Manual. ACS550-CC Packaged Drive with Bypass Supplement for ACS550-01/U1 Drives User s Manual
User s Manual ACS550-CC Packaged Drive with Bypass Supplement for ACS550-01/U1 Drives User s Manual ii ACS550-CC Packaged Drive with Bypass ACS550 Drive Manuals GENERAL MANUALS ACS550-01/U1 Drives User's
GIS Electric Chain Hoists
250 ~ 5,000 kg ing Capacity Single or Three Phase Supply Fixed, Manual or ized Trolley Single or Two Compact and Rugged Design Tel 905.844.4766 or 1.888.217.6435 Fax 905.844.1293 or 1.888.217.7926 Head
CATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION ML-44103, ML ML-44105, ML ML-26243
CATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION W32 W32C 625A HP ML-44103, ML-26320 ML-44105, ML-26331 ML-44069 ML-26243 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001
MOTIV- 8 FLEXIBLE CABLE SYSTEMS. www. James Crane.com.au PH:
MOTIV- 8 FLEXIBLE SYSTEMS www. James Crane.com.au PH: 1300 780 420 Email: Robert@jamescrane.com.au CONTENTS System Selection Enquiry Sheet Carrying Capacity kg Recommended Maximum Speed (m/min) Wire Rope
AIR POWERED CHAIN HOIST AL/AW/AS SERIES
EFFECTIVE: January 20, 207 AIR POWERED CHAIN HOIST AL/AW/AS SERIES ¼ Ton through 5 Ton Capacity Code Number and Serial Number WARNING This equipment should not be installed, operated or maintained by any
Mini-Cat AIR POWERED CHAIN HOIST AH SERIES 250 and 500 Lb. Capacity
EFFECTIVE: December 19, 2016 Mini-Cat AIR POWERED CHAIN HOIST AH SERIES 250 and 500 Lb. Capacity Product Code and Serial This equipment should not be installed, operated or maintained by any person who
EXTREME R MOTOR OWNER'S MANUAL
EXTREME R MOTOR OWNER'S MANUAL 2 HP, 3 HP & 5 HP WITH SELF-ENGAGING CHAIN HOIST FOR TECHNICAL SUPPORT PLEASE CALL 1-(855) 594-4969 3137B(0) ECN 1313 BY JM 7/9/15 OPERATOR SERIAL# PRO-FDG MOTOR OPERATORS
6428 Pow-R-Jet Plus Drum Mount Fogger
6428 Pow-R-Jet Plus Drum Mount Fogger parts price list & order FORM 1. Select parts (see drawing over) and quantities. Shipping costs and sales taxes if applicable will be added to order subtotal. 2. Enter
M-Force three-phase switch
Supersedes K-SEC 926 December 2012 M-Force three-phase switch Description The M-Force switch from Eaton's Cooper Power Systems is a distribution-class, gangoperated, factory unitized three-phase overhead
Parts Catalog SLICING MACHINE
Parts Catalog SCR12 Slicer SLICING MACHINE MODEL: SCR12 1-12-16N IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT COMPANY
TANK LIDS, REAR STEP AND WHEELS
TANK LIDS, REAR STEP AND WHEELS M9060-22 Rev.4/98 FOR MODELS - KP4F, KP6F, KP6R 4/98 Item Part Number Part Description Qty. 1 9040--16--0 Tank Lid Weldment (KP4F -- Front Load) 1 9060--16--0 Tank Lid Weldment
8 1/2' and 9 1/2' HDV Snowplow
TrynEx International, LLC, 31 Ajax Drive, Madison Heights, MI 48071 49 www.snowexproducts.com December 1, 016 Lit. No. 941, Rev. 00 8 1/' and 9 1/' HDV Snowplow Mild Steel Blades 77770, 77780 Stainless
High Performance Thermal-Magnetic Circuit Breakers 410/520/
High Performance Thermal-Magnetic Circuit Breakers 0/0/30-... Description Single, double and three pole high performance thermal-magnetic circuit breakers with tease-free, trip-free, snap action mechanism
SECTION 10 - ELECTRICAL
SECTION - ELECTRICAL Electrical Components, Upperstructure 6 6 TO CAB HARNESS BULKHEAD 9 WSH PWR WORK LT GND HEATER TEMP 6 CLUTCH-B CLUTCH-C 6 HORN 9 0 9 0 9 0 AC FAN- BOOM LTS TO UPPER PCB STR LEFT SGN
PRESSURE TRANSDUCERS. Specifications. Individual Specifications
00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need
Parts Catalog SLICING MACHINE
Parts Catalog precisely! G10E Slicer SLICING MACHINE MODEL: G10E 10-14-13N IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
Parts Catalog SLICING MACHINE
Parts Catalog precisely! SCR12 Slicer SLICING MACHINE MODEL: SCR12 10-10-13N IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
ICA Manufacturing Catalog. Your One Stop Metal Shop. Table of Contents. Visit us at:
ICA Manufacturing Your One Stop Metal Shop At ICA Manufacturing, you will find high-quality creations and wholesale parts at a budget price. From Aluminum Cabinetry, to Transformers, to Capacitors, we
Track Accessories. Single Circuit Track. L Connector T Connector X Connector. Mini Connector Floating Canopy End Feed Kit.
Single Circuit Single Circuit Track Live End Connector Flexible Connector Straight Connector Track supplied with dead end and mounting hardware Live end connector used for direct wiring Flexible connector
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
Terminal Blocks. Section 12. Control Catalog 12-1
CR151K Resilient Modular Terminal Blocks CR151C (top) and CR151A Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...12-2 Product Tables...12-3, 12-4 Accessories...12-3, 12-4 Technical
Product Information Packet CHC144A .25HP,1725RPM,1PH,60HZ,48Z,3411C,TEAO,F1
Product Information Packet CHC144A.25HP,1725RPM,1PH,60HZ,48Z,3411C,TEAO,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
ELECTRIC HYDRAULIC PUMP
Parts List for: Form No. 1000048 PE55TWP PE55TWP-220 MODEL D ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI See Back Sheet 5 of 8 1 13 2,3 11 OFF ON WARNING 6 4,5 0IL 7 VALVE DETAIL TORQUE SPOOL
3094PM1ii (Model VS-24-11) & 3094PM4ii (Model VS-24-9)
QUIC-STEP Retractable Vehicle Step Model VS-24-11 and VS-24-9 InPOWER Control Module Upgrade Manual ZICO 3094PM9 REV. 1-13-17 Note: This manual provides instruction when upgrading a vehicle step from a
MK IV HORIZONTAL SLIDING DOOR REPLACEMENT PARTS BOOK
MK IV HORIZONTAL SLIDING DOOR REPLACEMENT PARTS BOOK BI-PARTING DOOR SHOWN-SINGLE DOOR SIMILAR JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com