Index. Flexcor Wire Mesh Grips K-1
|
|
- Anis Wiggins
- 5 years ago
- Views:
Transcription
1 Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord Connector ) protects connections from cable stress in damp applications. No special installation tools required. Non-corrosive, double-weave stainless steel mesh () supports the cable, absorbs stress caused by flexure and vibration, as well as controls arc of cable. Mesh readily expands for a wide range of cord diameters. CG610 Male Straight, Deluxe Cord Connectors Index Rugged, easy-to-install and available in a wide range of sizes our Flexcor Wire Mesh, Cable-Pulling, and Cable-s are engineered to take some of the strain off of you. Device Page Number K-2, K-3 Product Description K-4 Split Lace & Rod Mesh Termination K-5 s K-6 Grips K-7 Liquid-Tight Grips K-8 s Standard-Duty, Closed Mesh K-9 s Standard-Duty, Split Lace K-10 s Standard-Duty, Split Rod K-11 s Heavy-Duty K-12 s Service & Bus Drop K-13 s Fiber Optic K-14 Pulling Grips Junior- & Light-Duty K-15 Pulling Grips Medium-Duty K-16 Pulling Grips Heavy-Duty K-17 Pulling Grips Multi-Weave K-18 Pulling Grips High Strength & Fiber Optic K-19 Pulling Grips Slack K-20 Selecting Properly Sized Pulling & s K-21, K-22 Pulling & s Strength Information K-23 K-1
2 Bus/Service Drop Liquid-Tight Conduit Grip (page K-8) Bus/Service Drop Liquid-Tight Conduit Grip (page K-8) Medium/Heavy-Duty (pages K-16, K-17) Service Drop For assistance in selecting, see pages K-21 K-23. K-2
3 High Strength Pulling Grip (page K-19) Bus Drop Deluxe Cord Grip Strain Relief AIR Heavy-Duty Underground Pulling Grip (page K-17 K-3
4 Application are used to support cable or conductor after it has been installed, pull electrical cable or conductor into place, provide strain relief at the point of wiring connections. Flexcor devices protect cables, relieve stress, and prevent cable pull-out from fittings and terminations. Product Description Available in four different attachments. Load is distributed over entire length of grip and will not injure cable. Attachments Double Eye Single Eye Offset Eye Locking Bail Eye Grip Fittings Male Straight Female Straight Male 45 Male 90 Prevents pull-out or damage to cable due to constant motion or flexing. Also for Liquid-Tight, hose and box connections. Pulling Grips Rotating Eye Mesh Types Closed Mesh Split Lace Mesh Split Rod Mesh Assortment of rugged pulling grips available individually or in kits to make wire pulling easier. Product Description K-4 Available in three types and depends on availability of wire end.
5 Description Pulling Grips Junior-Duty & Light-Duty Junior-duty series grips are indispensable tools for electricians with small job requirements. They are used to connect insulated wire bundles to pulling tape or to pull wire or rope through conduit. Cable Diameter Mesh Approximate Catalog Number Range Length Break Strength* Junior-Duty, PJ "-0.360" 5" 1,700 lbs. PJ "-0.490" 7" 1,700 lbs. PJ "-0.610" 8" 1,700 lbs. PJ "-0.740" 10" 2,800 lbs. PJ "-0.990" 10" 4,100 lbs. PJ "-1.240" 12" 4,100 lbs. *To determine workload safety factor, divide approximate break strength by 5. See Page K-23 for strength information. Description Light-Duty grips are the most economical pulling grips for many applications, such as industrial plant wiring, and rewiring, and underground electrical pulls. Cable Diameter Mesh Approximate Catalog Number Range Length Break Strength* Light-Duty, Short Length, PL "-0.610" 11" 3,400 lbs. PL "-0.740" 11" 4,100 lbs. PL "-0.990" 13" 4,100 lbs. PL "-1.240" 14" 5,800 lbs. PL "-1.490" 15" 5,800 lbs. PL "-1.740" 16" 7,500 lbs. PL "-1.990" 18" 10,000 lbs. PL "-2.490" 19" 10,000 lbs. PL "-2.990" 19" 13,000 lbs. Light-Duty, Standard Length, PL "-0.740" 16" 4,100 lbs. PL "-0.990" 20" 4,100 lbs. PL "-1.240" 20" 7,500 lbs. PL "-1.490" 22" 7,500 lbs. PL "-1.990" 25" 7,500 lbs. PL "-2.490" 26" 10,000 lbs. PL "-2.990" 28" 13,000 lbs. PL "-3.490" 30" 16,200 lbs.. *To determine workload safety factor, divide approximate break strength by 5. See Page K-23 for strength information. Catalog Number Description Junior-Duty, Kit PJ1KIT Kit contains 1 each of PJ25, PJ37, PJ50, PJ62, PJ75, PJ100 Junior-Duty Light-Duty Short Length PJ1KIT K-15 Pulling Grips Junior-Duty & Light-Duty
Index. Flexcor Wire Mesh Grips K-1
Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord
More informationCABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
More informationWire Mesh Safety Grips
Straight Male 90 Male Straight Female L7901 L7915 L7951 Liquid-Tight Grips U* R* Liquid-Tight Grips are woven stainless steel mesh with an anodized aluminum body for corrosion-resistance. They are used
More informationWire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
More informationWire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
More informationWire Mesh Safety Grips
Pulling Grips PS Series S PS Series grips feature a double weave of galvanized steel strands for greater strength and added mesh contact with the cable. Leviton Double Weave Pulling Grips are designed
More informationTCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
More informationSECTION Wire Mesh Safety Grips
SECTIN Pulling Grips Low Tension Junior Duty Series Grips are indispensable tools for electricians with small job requirements. They are used to connect insulated wire bundles to pull tape or to pull wire
More informationWire Mesh. Flexible Cord. Liquid Tight Mesh Grips for Flexible Metal Conduit STR GT Series
58 We have taken our excellence and combined quality steel mesh to create the best grips in the industry. American Fittings cable grip and cord grip bodies are safe and strong in any industrial environment.
More informationWire Management Products Index
Section T Wire Management Products Index Product Page Number Kellems Wire Mesh Grips T-2 3 Pulling Grips T-4 16 DUA-PULL Grips T-6 DUA-PULL Feed Tube T-6 Overhead Multiple Strength T-7 Underground Pulling
More informationWire Mesh Safety Grips
Wire esh Safety Grips Leviton are built tough to provide the strength, reliability and gripping force required for today s demanding wire management applications. They are designed to distribute stress
More informationLiquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
More informationPulling & Support Grips
DCD Pulling Grips DCD cable grips are hand-woven by experienced tradespeople guaranteeing a consistent level of high quality. DCD grips are reverse woven, creating a loop at the end of the grip instead
More informationKellems Wire Management Products
Section V Kellems Wire anagement Products Index Product Page Kellems Wire esh Grips Diagram..................................V-2 Quick Reference Selection Guide for Grip Applications.................V-4
More informationManufacturers of Quality Wire Mesh and Accessories. Support Grips Pulling Grips Splicing Grips Strain Relief Grips Deluxe Cord Grips Accessories
CAT #09 Manufacturers of Quality Wire Mesh and Accessories Support Grips Pulling Grips Splicing Grips Strain Relief Grips Deluxe Cord Grips Accessories 30 Center Parkway Plainfield, CT 06374 800-893-8397
More informationcable installation AnD SuPPorT MADE A WHOLE LOT EASIER TRUSTED INNOVATION q4:17 v1.7
cable installation AnD SuPPorT MADE A WHOLE LOT EASIER q4:17 v1.7 www.slingco.com TRUSTED INNOVATION a global business built on quality, innovation, service...and real family ties Business partners and
More informationAluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
More informationChoose molded-to-cable or fi eld-attachable styles. J-Series are available in red and black synthetic rubber for easy phase identification.
Plug and Receptacles Cam-Lok has been supplying high quality electrical connectors to the welding industry for more than 40 years. No other manufacturer offers a broader line of connectors for both general
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationCable Grips, Swivels and Accessories
Cable Grips, Swivels and Accessories For quick and efficient cable installation and support Swann & Associates 562.492.1394 562.492.1396 fax sales@swann-associates.com 1707-B East 28th Street Signal Hill,
More informationCam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
More informationCABLE GRIPS & ACCESSORIES
CABLE GRIPS & ACCESSORIES QUICK AND EFFICIENT CABLE INSTALLATION AND SUPPORT 2012 Welcome to Slingco America Inc. A business focused on your needs Nick Dykins, CEO (right) Matt Dykins, President (left)
More informationKeeping. corrosion down FOOD & BEVERAGE SOLUTIONS. efficiency. and plant. & safety up. designed to be better.
Keeping corrosion down FOOD & BEVERAGE SOLUTIONS and plant efficiency & safety up designed to be better. Stainless Steel CABLE MANAGEMENT A cleaner solution for the food and beverage industry Cablofil
More information2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example
Coupling nut Plugshell O-Ring O-Ring Cable clamp 2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example Shell ring Plugshell O-ring: Shell: The Plugshell O-Ring is designed to help to maintain
More informationFIBER OPTIC CABLE BLOWING METHOD
FIBER OPTIC CABLE BLOWING METHOD An Efficient Method Fiber optic cable blowing is one of the most efficient and safe means of installing fiber optic cable. A pressurized blowing system uses two forces
More informationYOUR SPECIALIST AROUND CABLE AND WIRE. Catalog
Catalog "upi Cable- And wirestockings, Quality based on tradition The company rupi cologne is your perfect partner for anything in Cable and rope stockings. Since 1966 we have been the market leader in
More informationFeatures. Track Length System Length Storage Length. Active Travel. System Depth Loop Depth Tow Trolley. Intermediate Trolley
Magnetek s Electromotive Systems Mill Duty I-Beam Festoon Systems efficiently and economically deliver power and control to cranes used in a variety of severe industrial environments. Features Capacity
More informationControl Circuits Connectors Type SK & SKW Overview
Control Circuits Connectors Type SK & SKW Overview 20 Amp, 250 Volts AC or DC, 600 Volts AC Max. Rating Load-Breaking Multi-Circuit Receptacles, Plugs, Connectors and Inlets Features and Benefits Type
More informationDouble Hanger Only. Sheave Diameter " 3" Double Hanger Only
32000 Series Fiber Optic s & Quadrants For pulling fiber optic cable, DCD has a special series of sheaves and quadrants that will allow the maximum possible bend radius for the application. All the sheaves
More informationOverhead Products. Overhead Products Introduction. Model Q Lasher. Eagle Lasher Series Series
Introduction In 2006, DCD Design took on the Spinning Equipment Company and began producing the Lineman and Eagle cable lashers. In doing so, DCD took on a long history of quality and innovation. These
More informationFrom simple, straight shots to pulls with multiple bends
www.greenlee.com CABLE PULLING From simple, straight shots to pulls with multiple bends and offsets, Greenlee Cable Pulling equipment saves time, increases your efficiency and safely pulls cable where
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationKJ Main Components - 120V 60Hz. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Jetter KJ-0 Main Components - 0V 0Hz 0 0 NOTE: Order parts by Catalog Number only. Decal, Potable Water 0 Decal, Model Number Decal, Warning Motor Shroud 0 Hand Grip Handle Cord Wrap Pan Head Screw, #
More informationMirror Solutions Bevel & Pivot Models Installation Instructions INSTALLATION INSTRUCTIONS. Figure 1
Installation Instructions Mirror Solutions Bevel & Pivot Models 620095-620098 Mirror Solutions Bevel - Models # 620095 & 620096 Mirror Solutions Pivot - Models # 620097 & 620098 Figure 1 INSTALLATION INSTRUCTIONS
More informationMETERING REQUIREMENTS
METERING REQUIREMENTS KUA will not accept a non-securable service trough entrance. That is, all enclosed conductors prior to the meter (line side) will be securable by and accessible to KUA personnel only.
More informationIts not just any pendant; its a resilient, hardened rubber station seasoned with over 30 years of industrial use and innovation.
Its not just any pendant; its a resilient, hardened rubber station seasoned with over 30 years of industrial use and innovation. Put Your Crane on Target with a SPOTTER Pendant Station! Page 2 TABLE OF
More informationStandard Grade 14 Inch Reflector. Ordering Information
Job Type Dimensions Specifications B A NRTL/C C Damp Location D E Slick- On Quick- On F A B C D E F 9-1/2" 2" 9-1/2" 20-22/32 24-27/32" 9-7/16" 14-1/4" 241 mm 51 mm 241 mm 536-631 mm 240 mm 362 mm 9-1/2"
More informationLF-72 AND LF-74 WIRE FEEDERS
LF-72 AND LF-74 WIRE FEEDERS Shown with options: See page 4 for all models ISO 9001:2000 14001:2004 2-ROLL OR 4-ROLL HEAVY DUTY INDUSTRIAL FEEDERS Designed for MIG and cored wire welding in job shop and
More informationMolded & Mechanical Military Connectors (MIL-C-5015)
Cord sets & CONNECTOR ASSEMBLIES / connectors Molded & Mechanical (MIL-C-5015) Abrasion Chemicals Flexing MIL-C-5015 VG 95 234 NATO Specification Operating Temperature Range -55 C to 125 C TPC s Circular
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output
More informationNon-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
More informationDesign PTS6-XX SERIES
Design PTS6-XX SERIES Arm Mount to Pole with Disconnect Unit H E C B J I D F A K G A. HEAVY DUTY ELECTRICAL DISCONNECT UNIT WITH MULTI-CONTACT CONNECTOR. B. DISCONNECT UNIT FITTER WITH PULLEY AND U-BOLT
More informationFulfilling your needs & Safe
MEETING CZEPJ Industrial plugs and sockets Fulfilling your needs & Safe Pavel Mony, product management Plug and socket What s on the cable Connecting building and equipment Socket Connector Inlet Plug
More informationThe portable, hand-held rebar bending and cutting system. OPERATOR S MANUAL Made in U.S.A.
The portable, hand-held rebar bending and cutting system. OPERATOR S MANUAL -800-665-7549 Made in U.S.A. Thank you for purchasing an EZE BEND SYSTEM. The OPERATOR S MANUAL provides information for all
More informationFAX: HOSE COUPLINGS, FITTINGS, CLAMPS AND ACCESSORIES
-800-686-580 FAX: -877-94-467 Nozzles OPW 90 Manual Nozzles High Flow, Bulk Fuel Oil Delivery Service OPW 7H Automatic Shut-Off Nozzles Heavy-Duty, High Flow Truck, Bus and Fleet Service Spout Optional
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationInstallation Manual CS9300-LED. Professional Series Landscape Lighting System
Installation Manual CS9300-LED Professional Series Landscape Lighting System CS9300 Professional Series LED Landscape Lighting System pg. 1 READ THESE INSTRUCTIONS ENTIRELY BEFORE BEGINNING INSTALLATION!
More informationCompact Rope-Activated Emergency Stop Switch. DIN mounting pattern for a globally recognized mounting configuration
C R US Conforms to EN418, EN292, EN0947-5-1, EN50041, BS504, ISO1850 UL and C-UL listed ER4020 Compact Rope-Activated Emergency Stop Switch Compact size allows this switch to be used on smaller machines
More informationamericanfittingscorp.com t: e:
Reusable Fittings / Straight Connectors Size Range: 3/8 to 5 Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationControl Circuit and Industrial Interlock
Control Circuit Connectors Overview Defined Any application where electrical connections need protection from water and/or dust entering the contacts or the wiring compartment Russellstoll Line Selections
More informationHPNLS-HO. Installation Manual
Installation Manual WARNING: Do not lift fixture by cables. This could result in permanent damage to both the fixture and the cables. Damage resulting from grasping cables and/or putting undue pressure
More informationElle Surface Mounting Instructions
Step 1: Preparation, page 2 Warnings CAUTION risk of fire and this product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation
More informationSpecialty Tools & Ergonomic Equipment Catalog
Specialty Tools & Ergonomic Equipment Catalog Staff Electric Co., Inc. November 2009 Volume 1, Issue 1 Table of Contents Task Page WIRE PULLING FEEDERS Section 1 3 Through 29 Equipment Checklist Wire Pullers
More informationPRODUCT CATALOG TPS UNI-COUPLING. Your repair is our care
PRODUCT CATALOG TPS Your repair is our care UNI-COUPLING HIGH FLEXIBILITY AND SAFETY MARGINS DETERMINE THE BASIC PRINCIPLE OF UNI-COUPLING Two types of UNI-Coupling UNI-Coupling applies one unique technical
More information60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
More informationCable pulling technology
Cable pulling technology Fish tapes/pulling rods 556 Polyester 556 Perlon 556 Nylon 556 Steel 557 Flex-O-Twist speed flex leader 557 Fibreglass cable pulling rods 557 Cable pulling systems 55 With Polyester
More information3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms
3M Products for Electrical Networks Wind Farm Capabilities Leading Edge Electrical Solutions for Wind Farms 3M technologies for wind farms Wind farm projects are difficult enough without the risk of construction
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders 2-Roll or 4-Roll Heavy Duty Industrial Feeders Designed for MIG and cored wire welding in job shop and manufacturing environments, the rugged LF-72
More informationNFPA 70E 68! & CSA Z462
DB Switch-Rated plug and receptacle Main Advantages u Switch & Hp rated u 100 ka short circuit rated* u IP67 environmental ratings u Up to 4 auxiliary contacts u Durable metal construction * See note under
More informationStandard Grade 23 Inch Reflector/Refractor. Ordering Information. series wattage source voltage optics color options options BL-LB1
Job Type Dimensions Specifications B A C NRTL/C Damp Location D Slick-On Quick-On E A B C D E 9-1/2" 2" 9-1/2" 26-11/16" 23-1/8" 241 mm 51 mm 241 mm 678 mm 587 mm 9-1/2" 1-1/8" 8-5/8" 25-13/16" 23-1/8"
More informationSimplex. Specifications: EasyELECTRIC Factory Prewired Basin Package Stainless Rail with Junction Box. Basin Assemblies
www.cranepumps.com Simplex EasyELECTRIC Factory Prewired Basin Package Stainless Rail with Junction Box PS-025 Specifications: inches (mm) Basin Assemblies BASIN...Fiberglass w/ 3 (76) Ballast Support
More informationCable (Rope) Pull Switches Lifeline 4
Emergency Stop Devices Description The cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. The is the only
More informationTherm-L-Tec Building Systems LLC. Therm-L-Tech. Power Operated Retrofit Kit 230 VAC or 440/480 VAC 50/60 Hz Installation and Setup Manual
Therm-L-Tec Building Systems LLC Therm-L-Tech Power Operated Retrofit Kit 230 VAC or 440/480 VAC 50/60 Hz Installation and Setup Manual Rev. A 01/2015 Index Index 1 Electrical Requirements for Therm-L-Tec
More informationIMPORTANT INSTRUCTIONS
Application: Corvette 1963-1977 TRW Composite Spring Part Includes 1 - Composite Spring Tools Needed Epoxy B Epoxy A LB/FT 0 10 20 30 IMPORTANT INSTRUCTIONS Proper positioning of the mounting kit in the
More informationAMERICAN FITTINGS Corporation
AMERICAN FITTINGS Corporation Conduit Fittings Flexible Cord Rigid/IMC Liquid Tight EMT Wire Mesh Think American USA Made Since 1946 2009 Edition PLEASE NOTE THIS CATALOG IS BEING UPDATED AND SHOULD BE
More informationBMK-30. Heavy-Duty By-Pass Filtration System Installation and Servicing Instructions
BMK-30 Heavy-Duty By-Pass Filtration System Installation and Servicing Instructions IMPORTANT NOTICE Read all instructions completely before attempting to install this unit. Improper installation could
More informationInstallation Manual CS9100-LED. Professional Series Landscape Lighting System
Installation Manual CS9100-LED Professional Series Landscape Lighting System LED Landscape Lighting System pg. 1 READ THESE INSTRUCTIONS ENTIRELY BEFORE BEGINNING INSTALLATION! Congratulations on your
More information35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Equipment Connection Bus Bar, or Grounded Metal Equipment Plate F Series Mounting Holes ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric
More information16A & 32A IEC 309 Watertight pin & sleeve devices
Technical Data IEC 309 Product Description - International ; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding AH416R6W AH416C6W AH416P6W Pin & sleeve plugs features & benefits
More informationDEMANDING CONDITIONS, DEMAND THE BEST!
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical
More informationMIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationRound & Oval Heavy-Duty Connectors
Round & Oval Heavy-Duty Connectors Solutions You Can Trust Table of Contents Introduction...3 Round Connectors...4 Round Receptacle Parts...9 Oval Connectors...10 Oval Receptacle Parts...14 2 Round & Oval
More informationVersatility: SPECIFICATIONS. POWER CABLE INSTALLATION Standard Features:
WDR505 CABLE PULLER Versatility: POWER CABLE Standard Features: Closed hydraulic circuit for stepless speed variation in both rotating directions. Negative self-acting hydraulic brake. Hydraulic dynamometer
More informationPower Operated Retrofit Kit for Manual Door 230 VAC or 440/480 VAC 50/60 Hz Installation and Setup Manual
Therm-L-Tec Building Systems LLC Therm-L-Tech Power Operated Retrofit Kit for Manual Door 230 VAC or 440/480 VAC 50/60 Hz Installation and Setup Manual Rev. A 10/2014 Index Index 1 Electrical Requirements
More informationTubeTrace Tubing Bundles
for Custom CEMS and Analytical Umbilicals English Units Receiving, Storing and Handling... 1. Inspect materials for damage incurred during shipping. Report damages to carrier for settlement. 2. Identify
More informationHeavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More information60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
More informationInstallation Guidelines for Dukane Probes Used in Automation
Installation Guidelines for Dukane Probes Used in Automation Dukane makes a wide variety of ultrasonic probes for use in automated machinery. These probes are used in welding, staking, embedding, and cutting
More informationStandard Charging Carts, Intelligent Charging System
LIC30H-A Series LIC36H-A Series Product Data Sheet Standard Charging Carts, Intelligent Charging System Safety-First Design Carts feature rounded edges, no pinch points, no ledges, and locking wheels for
More informationIndustrial, Heavy Insulated Mono-Tape. and Duo-Tape
Industrial, Heavy Insulated Mono-Tape and Duo-Tape Description: HTS/Amptek AWD and AWM Heating Tapes are Single and Double Duo-Tapes designed for use in high temperature applications. AWD and AWM Heating
More information3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project
3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber
More informationL 5 L 4 X 6 ( ) ( ) F A X ( ) R E M K E. C O M
REMKE.COM Bringing You Industrial-Strength Electrical Connectors with Personalized Service, Order Flexibility & Custom Solutions This is Why You Should Partner with Remke. Remke has been manufacturing
More informationU-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
More informationDuct Rodder Accessories
Duct Rodder Accessories Mini-Harness Roller Guide Flexible Leader Shackle Ftg. Tapered Head Threaded End Ftg, Male included on all rod O-Ring Threaded End Ftg, Male Mini-Cobra Rod Swivel Coupling female/female
More informationCam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
More informationArktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
More informationGood for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
More informationAUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
More informationRussellstoll. Electrical Interconnection Systems. Computer System Plugs, Connectors and Receptacles. Quick Selection Chart. TüV
More than 30 years ago, Russellstoll offered the first pin and sleeve connectors that met the demanding needs of the Data Processing industry, and we ve been leading the way ever since. The expanding technology
More information15 kv and 25 kv Thru-Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
More informationYOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationPlastic Collar Quick Connect Fitting Service
2004 Chevrolet Silverado 1500 -Fuel Systems > Fuel Controls -4.8L, 5.3L, And 6.0L > Repair Ins... Page 1 of 10 2004 Chevrolet Silverado 1500 : Fuel Systems > Fuel Controls - 4.8L, 5.3L, And 6.0L > Repair
More information4. SHIELDS. 4.1 Power Cable. 4.2 Electronic Cable Conductor Shield (Strand Shield) Outer Shield (Insulation Shield) 60
4. SHIELDS 4.1 Power Cable 4.1.1 Conductor Shield (Strand Shield) 60 4.1.2 Outer Shield (Insulation Shield) 60 4.2 Electronic Cable 4.2.1 Foil Shield 62 4.2.2 Copper Braid Shield 63 4.2.3 Spiral (Serve)
More informationCS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
More information20A & 30A IEC 309 Watertight pin & sleeve devices
AH430R7W AH430C7W IP69K certified AH430P7W Product Description - North American 20A & 30A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve plugs features & benefits
More informationTransmission Mechanism
Autodesk Inventor Engineer s Handbook هندبوک مهندسی نرم افزار Autodesk Inventor انجمن اینونتور ایران www.irinventor.com Email: irinventor@chmail.ir irinventor@hotmail.com Tel: 09352191813 & Transmission
More information