Seismic Sensor Accessories SA, SV & ST 6000 Series

Size: px

Start display at page:

Download "Seismic Sensor Accessories SA, SV & ST 6000 Series"

Herbert Lambert
5 years ago
Views:

Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to

Zinc Plated 7084-002 Flange Mount 7295-002 For surface mounting of 7295 housing. 1/4 NPT center hole. 3 equally spaced 6.6 (.26) dia. mount holes on 38 (1.50) dia. circle.

rare earth magnet provides up to 16 kg [35 lbs] pull force for temporary mounting of 1/4-28 tapped accelerometers. Housing has 1/4-28 center hole & includes sensor mounting stud.

1 Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28 mount accelerometers. Rain tight & ex-proof for CSA Class 1, Grps A-D, Div.1. 1/4 NPT stud for mounting to machine case. 1 NPT top conduit union. Zinc Plated Flange Mount For surface mounting of 7295 housing. 1/4 NPT center hole. 3 equally spaced 6.6 (.26) dia. mount holes on 38 (1.50) dia. circle XXXX Magnetic Mount Magnetic Mount Bulk Cable Mounting Pad SA6200A-X0X; SV6300A-001 SA6200A-X1X; SV6300A SA6200A, ST6900 Series & SV6300A Strong rare earth magnet provides up to 16 kg [35 lbs] pull force for temporary mounting of 1/4-28 tapped accelerometers. Housing has 1/4-28 center hole & includes sensor mounting stud. Same as except metric version. Housing has M6X1 center hole and comes with matching sensor mounting stud..250 dia. bulk cable with twisted, shielded pair wires. For customer attachment to mating connector P/N Specify - XXXX in 0.1 m increments (e.g =25.0 m ). Mounting pad for magnet, 1 Polyurethane Jacketed , Accelerometer EP Housing Assembled Disassembled Flange Mount , Mounting Pad, XXX Magnetic Mount 125 mm [5.0 in.] Weight: 0.7 kg [1.5lb] Weight: 0.5 kg [1 lb] Weight: 0.5 kg [1 lb] Weight: kg [0.5 lb] 2.28

Seismic Sensor Accessories SA, SV & ST 6000 Series Mating Connector/Cable Assemblies 8978-111-XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot

2 Seismic Sensor Accessories SA, SV & ST 6000 Series Mating Connector/Cable Assemblies XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters XXXX-YYYY, Splashproof Cable Assembly w/ Armor Two (2) pin socket connector with integral, molded splash proof boot with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters XXXX, Cable Assembly Two (2) pin socket connector with cable strain relief with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. Note: All 8978 connector/cable assemblies rated to 121 o C (250 o F) max XXXX-YYYY, Cable Assembly, w/ Armor Two (2) pin socket connector with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters , Connector Assembly Two (2) pin socket connector with cable strain relief, no cable , Mounting Stud 1/4-28 UNF to 1/4-28 UNF , Mounting Stud 1/4-28 UNF to M6 X , Mounting Stud 1/4-28 UNF to 3/8-24 UNF , Mounting Stud 1/4-28 UNF to 1/4-18 NPT , Sensor Spot Facing Kit Tool with a 3/16 pilot and drill bits and taps NOTE: All 8978 connector/cable assemblies rated to 121 C (250 F) max. 2.29

Seismic Sensor Accessories Probe Driver / Signal Conditioner / Transmitter Housings Features Provides physical protection NEMA 4/IP 65 Models for 2, 4 or 8 units Conduit terminations (when used)

26) Proximity Probe Transmitter Models TXA & TXR (Pg 1.20) Probe Driver Model 5533 (Pg 1.18) 1 Products (ordered separately) to be DIN-rail mount to fi t enclosures.

NEMA 4/IP 65 Model 7876-001 shown - 2 units (max.

housing with threaded cover & DIN-rail/s for mounting Metrix Instrument Co. products. NEC & CSA rated for Class I, (C,D) & Class II (E, F & G), Div.1 areas. ATEX rating EEx d IIC T5 or T6.

3 Seismic Sensor Accessories Probe Driver / Signal Conditioner / Transmitter Housings Features Provides physical protection NEMA 4/IP 65 Models for 2, 4 or 8 units Conduit terminations (when used) Hazard rated - 2 or 4 unit models Metrix Product Applications 1 Signal Conditioner Models 5534 & 5544 (Pg 2.12) 5535 & 5545 (Pg 2.06) Signal Condtioner Models 5510, 5516 (Pg 1.26) Proximity Probe Transmitter Models TXA & TXR (Pg 1.20) Probe Driver Model 5533 (Pg 1.18) 1 Products (ordered separately) to be DIN-rail mount to fi t enclosures. Weatherproof Versions Polyester coated steel housing with gasketed cover and stainless steel clips comes with conduit hubs and DINrail/s for mounting Metrix Instrument Co. products. NEMA 4/IP 65 Model shown - 2 units (max. capacity) 1 NPT EXIT (Model 7876) (Model 8172) 1 1/4 NPT (Model 8173) 3/4 NPT ENTRY (QTY 2 for 7876) (QTY 4 for 8172) (QTY 8 for 8173) with 1 unit Explosionproof Versions Cast aluminum housing with threaded cover & DIN-rail/s for mounting Metrix Instrument Co. products. NEC & CSA rated for Class I, (C,D) & Class II (E, F & G), Div.1 areas. ATEX rating EEx d IIC T5 or T6. Explosionproof Model shown - 2 units (max. capacity) 3/4 NPT 1/2 NPT ATEX How To Select... Model Environmental Rating Units Empty Weight Dimensions in mm (inches) Weatherproof 2 2 kg (4.4 lb) 200 x 250 x 100 (8 x10 x 4) Weatherproof 4 3 kg (6.6 lb) 250 x 300 x 125 (10 x 12 x 5) Weatherproof 8 4 kg (8.8 lb) 300 x 350 x 150 (12 x 14 x 6) Explosionproof 2 5 kg (11 lb) 178 x 178 x 163 (7 x 7 x 6.4) Explosionproof 4 11 kg (24 lb) 280 x 229 x 190 (11 x 9 x 7.5) Note: Customized and pre-wired housings available upon request. Please contact us for more information. 2.30

4 Velocity Sensor Accessories 5485C PART NO. NAME USED WITH DESCRIPTION Mounting 5485C 1/4-28 mount adaptor - loose with screws and stud. (0.2 Kg) Mounting Same as -001 except shipped attached to sensor XXX, Mounting 2.31

5 Transmitter Accessories ST5484E, ST5491E , Conduit Elbow & Reducer Provides access and physical protection for fi eld wiring. Suitable for Class I, Div. 1 (Grps C & D) and Class II, Div. 1 (Grps E, F & G), hazardous areas. 1 to ¾ NPT reducer for customer connection included. NEMA 4 IP 65. Material: copper free aluminum , Conduit Elbow & Reducer Conduit Elbow with terminal block , Conduit Elbow & Reducer Provides access and physical protection for fi eld wiring , Conduit Elbow & Reducer Conduit Elbow with terminal block , Conduit Union Fits between transmitter and conduit elbow to facilitate installation and wiring where there is not enough room to rotate the elbow. Suitable for Class I, Div. 1 (Grps A, B, C & D) and Class II, Div. 1 (Grps E, F & G), hazardous areas. Material: zinc plated steel , Flange Mount Provides a means to surface mount transmitters rather than NPT stud (½ : NPT center hole). Three equally spaced 6.6 mm (0.26 ) diameter mounting holes on 38 mm (1.50 ) diameter circle , Flange Mount Same as , except center hole is ¼ NPT. Material: stainless steel , Bushing Bushing for ½ NPT mount when screwed onto standard ¼ NPT base. Material: stainless steel XXX, Two-wire, Cable Assembly 2 conductor (20 AWG) twisted, shielded PVC jacketed cable, with plated steel grip for cable strain relief, male ¾ NPT end. Specify -XXX for length in feet. Example: =10 ft (3.1M). Material: zinc plated steel XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters XXXX-YYYY, Splashproof Cable Assembly w/ Armor Two (2) pin socket connector with integral, molded splash proof boot with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters XXXX, Cable Assembly Two (2) pin socket connector with cable strain relief with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. Note: All 8978 connector/cable assemblies rated to 121 o C (250 o F) max XXXX-YYYY, Cable Assembly, w/ Armor Two (2) pin socket connector with 7.1 mm (0.28 ) diameter, SST armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters , Connector Assembly Two (2) pin socket connector with cable strain relief, no cable , Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Diameter range:.156 to.25. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures , Armored Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Armor diameter range:.40 to.50. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures. 2.32

6 Transmitter Accessories ST6900 Series & IT XXXX, Splashproof Cable Assembly Two (2) pin socket connector with integral, molded splash proof boot with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters XXXX-YYYY, Splashproof Cable Assembly w/ss armor Two (2) pin socket connector with integral, molded splash proof boot with 7.1 mm (0.28 ) diameter, ss armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters XXXX, Cable Assembly Two (2) pin socket connector with cable strain relief with 6.4 mm (0.25 ) diameter polyurethane jacketed cable with twisted shielded pair wires. xxx.x = Cable length in meters. Note: All 8978 connector/cable assemblies rated to 121 o C (250 o F) max XXXX-YYYY, Cable Assembly, w/ Armor Two (2) pin socket connector with 7.1 mm (0.28 ) diameter, ss armored jacket with cable, twisted shielded pair wires. xxx.x = Armor length in meters. yyy.y = Cable length in meters , Connector Assembly Two (2) pin socket connector with cable strain relief, no cable , Mounting Stud 1/4-28 UNF to 1/4-28 UNF , Mounting Stud 1/4-28 UNF to M6 X , Mounting Stud 1/4-28 UNF to 1/4-18 NPT , Mounting Stud 1/4-28 UNF to 3/8-24 UNF , Mounting Stud 1/4-28 UNF to 1/4-18 NPT Note: These mounting studs are also used for 2-pin MS connector style accelerometers 2.33

Transmitter Accessories PMC/BETA 162VTS 7084-001, Flange Mount Provides a means to surface mount transmitters rather than NPT stud (½ : NPT center hole). Three equally spaced 6.6 mm (0.

7 Transmitter Accessories PMC/BETA 162VTS , Flange Mount Provides a means to surface mount transmitters rather than NPT stud (½ : NPT center hole). Three equally spaced 6.6 mm (0.26 ) diameter mounting holes on 38 mm (1.50 ) diameter circle , Flange Mount Same as , except center hole is ¼ NPT. Material: SS , Bushing Bushing for ½ NPT mount when screwed onto standard ¼ NPT base. Material: stainless steel XXX, Two-wire, Cable Assembly 2 conductor (20 AWG) twisted, shielded PVC jacketed cable, with plated steel grip for cable strain relief, male ¾ NPT end. Specify -XXX for length in feet. Example: =10 ft (3.1M). Material: zinc plated steel , Conduit Elbow & Reducer Provides access and physical protection for fi eld wiring. Suitable for Class I, Div. 1 (Grps C & D) and Class II, Div. 1 (Grps E, F & G), hazardous areas. 1/2 to 1/2 NPT reducer for customer connection included. NEMA 4 IP 65. Material: copper free aluminum , Conduit Elbow Conduit Elbow with terminal block, 1/2 to 1/2 NPT female. Supporting Accessories for MS Style Connector , Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Diameter range:.156 to.25. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures , Armored Cable Grip Strain Relief Fitting 3/4 NPT male thread to cable grip. Armor diameter range:.40 to.50. Complete with sealing ring and locknut. Hot dip / mechanically galvanized fi nish. Suitable for NEMA 4 enclosures , 1 to 1/2 Reducer Retrofit adapter 2.34

Proximity Transmitters, and Seismic Vibration Transmitters

Proximity Transmitters, and Seismic Vibration Transmitters TM016 Velocity/ Acceleration Vibration Transmitter Introduction The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The