Ashmin HammR Drill Motor
|
|
- Solomon Nicholson
- 5 years ago
- Views:
Transcription
1 Ashmin HammR Drill Motor By: Dr. Gunther (Doc) Tuesday, September 12 th, 2017 Research. Innovate. Test. Deploy.
2 Agenda Drilling Challenges Alternative Designs Drilling Hammer Trends Ashmin HammR Drill Design Objectives Development Design & Specifications Field Test Results & Data Path Forward
3 Torque ft-lb Increase ROP Drilling Challenges in Horizontal: 30 FPH FPH Motor runs: 80 hrs hrs Days per well: - BHA for curve & lateral: 20 days 6-7 days multiple - generally /4" (5") 1,500-2,000 5,000-8,000 16, /4" (7") 4,000-7,000 12,000-24,000 45,000
4 Alternative Designs to address Challenges Percussion Drilling Increased ROP by 30% to 50% Less torque requirement thus Less reactive torque Better steerability Less rotational horsepower requirements at the bit High Speed Drilling High speed drilling with an expected bit speed of app. 800 RPM Currently RPM bit speed RPM DP rotary Future 750 RPM bit speed + 40 RPM DP rotary
5 Drilling Hammer Trends The pace of drilling an oil or gas well with conventional mud motors is reaching technical limits. Ashmin has combined the function of a percussion hammer with the rotational action of a drilling motor to further increase drilling efficiency We call it the HammR Drill
6 Drilling Hammer Trends Mud Hammer Anderhammer Novatek Hammer SDS Fluid Hammer Wassara Hammer Company Andergauge Drilling Systems Type of Activation Type of tool Size Active Comments Piston Percussion Hammer 6-3/4" No Novatek Piston Percussion Hammer 7-3/4" No SDS Digger Tools Piston Percussion Hammer Wassara Piston Percussion Hammer 4-3/4"; 6-3/4"; 8" 2"; 3"; 3.5"; 4"; 5"; 6"; 8" No Yes Flow control system - Agitator Clean water only Mudhammer Drillstar Piston Percussion Hammer 5"; 7" Yes For all drilling fluids Hydro Efflux Hammer Sinopec Piston Percussion Hammer 5"; 7"; 9" Yes Fluid Hammer Upside Energy Piston Fluid Hammer NOV Camshaft HammR Drill Ashmin Camshaft Percussion section combined with a sealed mud motor bearing section Percussion section combined with a sealed mud motor bearing section Percussion section integrated into a mud lubricated mud motor bearing section 8" Yes 7" Yes 2-7/8"; 3-1/8"; 7" Yes Commercial, for all drilling fluids, using coanda effect Prototype testing, for all drilling fluid Commercial, for all drilling fluids, not run in Western Hemisphere 2-7/8" & 3-1/8" are commercial, 7" prototype, for all drilling fluids
7 HammR Drill - Design Objectives Integrate Percussion & Rotation Increase in ROP >30% Compatible with MWD Improve Steerability Compatible with all bit types Reduce stick slip with PDC Minimizes tool failures Produce a less tortuous wellbore HammRdrill
8 HammR Drill - Development 3 year R&D program Developed entirely in-house Commercial version of 2-7/8 and 3-1/8 tools sizes Successfully completed 7 system in field trials in cooperation with Scientific Drilling
9 HammR Drill - First Generation
10 HammR Drill - Second Generation 10
11 HammR Drill - Specifications Bearing Section Overall Length (in cm) Bearing Section Specifications Generation Gen 1 Gen 2 Gen Bit to Bend Length (in cm) Hammer OD (in cm) Bearing Housing OD (in cm) U-Join Housing OD (in cm) Bend Housing Pad Radius (in cm) Maximum Drilling WOB (dynamic) Maximum Overpull to Re-Run Absolute Overpull Maximum Driveline Torque Maximum Operation RPM Bit Box Connection ,000 lbs (49,000 kg) 250,000 lbs (109,000 kg) 600,000 lbs (272,000 kg) 14,000 ft-lbs (19,000 N-m) 150 rpm 4-1/2 Reg Box
12 HammR Drill - Specifications Hammer Mechanism Specifications Generation Gen 1 Gen 2 Gen 3 Number of Ramps Maximum Impact Frequency (Hz) Impact Energy (J) Impact Force (approximate, lbs) 15,000 6,000 15,000 20,000 Spring Design Belleville Belleville Coil Spring Ramp Contact Design Sliding Sliding Rolling Hammer Linear Support Design 2 Castles 2 Castles 10 Splines
13 HammR Drill - Field Test Run Results No. of Test Runs Interval Drilled (m) Total Drilling Hours. ROP (m/hr.) Avgas Company 1 6 5, HammR Drill Generation 2 HammR Drill Generation 3 Company 2 (All Gen 2) Company 3 (All Gen 2) 4 3, , , , Grand Total 12 10, Note: Company 1 and 2 are operators in Pennsylvania. Company 3 is in Canada. All runs were in 8.75 hole size in intermediate section down to kickoff point
14 HammR Drill - Field Test Data Key Points Increased ROP Minimized Slide Time No MWD Failures Similar Power Sections 7:8 3.3 Similar Flow Rates & Density Similar Water Based Drlg. Fluids
15 Smith Si616 BPX: 1-1-CT-A-X-I-CT-TD
16 Bradford cuttings - Sandstone
17 HammR Drill - Summary Summary Successfully integrated hammer mechanism into bearing assembly of steerable mud motor Effectively run in directional and vertical wells, all with PDC bits Key Observations/Results Good/excellent ROP: 30-50% increase No effect on PDC durability Excellent Steerability Repeatable/predictable tool face - low reactive torque Reduced slide time - improved BUR yield No interference MWD signal No BHA related failures
18 HammR Drill - Path Forward HammR Drill - Fourth Generation BTB Ten 7 tools in the field for optimization in 2018 Drilling Optimization Formation (soft to hard) Bit Hammerdrill Impact Load Impact Frequency WOB
19 Thank You Dr. Gunther (doc) C O doc@ashmin.com ashmin.com Research. Innovate. Test. Deploy.
Using Drilling Dynamics To Reduce Drilling costs
1 Welcome Using Drilling Dynamics To Reduce Drilling costs 2 Using Drilling Dynamics The cost of the drill bit, mud motor, and other BHA components depends the downhole conditions in which they operate.
More informationSmart Top Drive Automation Improves Drilling Performance and Prevents Downhole Tool Failures
Smart Top Drive Automation Improves Drilling Performance and Prevents Downhole Tool Failures IADC Southern Arabian Peninsula Chapter February 15 th, 2018 Top Drive Automation Overcoming Inefficiencies
More informationPOWR Series. Performance and Steerable Drilling Motors
POWR Series Performance and Steerable Drilling Motors Drilling Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research
More informationVibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation
Vibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation 2/5/2013 Roger L. Schultz TTS Drilling Solutions Presentation Overview Frictional Forces, Vibratory
More informationAPACHE CORPORATION Daily Drilling Report Page of 3 WELLBORE NAME UNIVERSITY 2303 E 7HM API # 24 HRS PROG TMD TD TVD 4238338764 00 542.0 4,528.0 8,669.2 32 RIG NABORS F34 FIELD NAME SPRABERRY AUTH TMD 5,97.00
More informationPartner - Drilling. Well Name: Fcu State/Province Texas Ground/Corrected Ground Elevation (ft) Rig
: 4/8/2016 Release Wait on daylight to complete rig move. 95,193.70 95,193.70 24hr MIRU from FCU 7220 to FCU 7442. Change out gen #2 motor. Clean and service rig. Wait on daylight to complete rig move.
More informationLatest Advancements in DrillString Mechanics
Services, Trainings, Softwares Latest Advancements in DrillString Mechanics SPE Gulf Coast Section 03/09/2016 Stephane Menand, Ph.D. stephane.menand@drillscan.com 1 DrillScan Intro Directional Drilling
More informationRENTAL TOOL SERVICES. Megaton Impact Tools
Megaton Impact Tools Megaton Impact Tools optimize your drilling operations. Megaton Impact Tools Ulti-Torq high-torque, double shoulder connections Involute spline design High-strength steel developed
More informationThru-Tubing. Motors and standard tools
Thru-Tubing Motors and standard tools Thru-Tubing Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research Innovate
More informationCT Plus. Coiled tubing bits for plug milling
CT Plus Coiled tubing bits for plug milling Designed specifically to optimize performance in plug milling including coiled tubing and workover operations, small-diameter CT Plus* coiled tubing bit from
More informationAPPROACH OPERATING LLC. RIG: Latshaw rig #22 KB: 28
MORNING DRILLING REPORT Date: 8/18/2013 Day: 1 Present Operation: waiting on daylight to finish rig move Depth: Footage: Rot. Hrs.: Cum Rot Hrs: 0 Daily ROP: ##### Brief Description Of Operations: move
More informationRENTAL TOOL SERVICES. Megaton Impact Tools
Megaton Impact Tools Upper Connector Megaton Impact Tools optimize your drilling operations. Drive Mandrel Female Spline Bearing Female Spline New-Generation Drilling Tools Megaton Drilling Jar Frees the
More informationSuccessful New Technology Introduction and Applications of Rotary Steerable System.
Successful New Technology Introduction and Applications of Rotary Steerable System. Mohammed Ibrahim Schlumberger Copyright 2003, MPC 2004 This paper was prepared for the 8th MEDITERRANEAN PETROLEUM CONFERENCE
More informationSPE Distinguished Lecturer Program
SPE Distinguished Lecturer Program The SPE Distinguished Lecturer Program is funded principally through a grant from the SPE Foundation. The society gratefully acknowledges the companies that support this
More informationELECTROPROJECT SOFT TORQUE. First documented Operational Soft Torque system for AC RIG s worldwide. Always the right drive
ELECTROPROJECT SOFT TORQUE First documented Operational Soft Torque system for AC RIG s worldwide ELECTROPROJECT SOFT TORQUE (EPST) First documented Operational Soft Torque system for AC RIG s worldwide
More informationAPPROACH OPERATING LLC. RIG: Latshaw rig # 22 KB: 28
MORNING DRILLING REPORT Date: 6/5/2013 Day: 1 Present Operation: Drilling 12 1/4" hole with bit # 1 Depth: 609 Footage: 569 Rot. Hrs.: 6 Cum Rot Hrs: 6 Daily ROP: 94.83 Brief Description Of Operations:
More informationCONSTRUCTION OF AN AUTONOMOUS LABORATORY SCALE-DRILLING RIG FOR TESTING AND CONTROL OF DRILLING SYSTEMS
CONSTRUCTION OF AN AUTONOMOUS LABORATORY SCALE-DRILLING RIG FOR TESTING AND CONTROL OF DRILLING SYSTEMS Authors: Erik Andreas Løken (UiS) & Suranga C.H. Geekiyanage (UiS) Co-Authors: Dan Sui (UiS) & Robert
More informationHealth, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested:
Wenzel Downhole Tools is the leading motor and drilling tool supplier, with worldwide operations supporting the oilfield and construction industries. Wenzel s capability to engineer, manufacture and service
More information44. Bit record form Rig site daily drilling report form Office drilling report Computerized drilling information network
Figures v Tables vii Foreword ix Acknowledgments xi Units of Measurement xii Introduction 1 Well Planning 5 Bits 9 Bit Selection 9 Bit Design 11 How Bits Drill 12 Roller Cone Bits 13 Natural Diamond Bits
More informationDRILLING MOTOR HANDBOOK
DRILLING MOTOR HANDBOOK GORILLA Drilling Motors TM rev213.6.19 DRILLING MOTOR HANDBOOK www.axonep.com The information contained in this handbook is for reference only. AXON Downhole Products Inc. does
More informationMitigating Bit-Related Stick-Slip With A Torsional Impact Hammer
AADE-11-NTCE-10 Mitigating Bit-Related Stick-Slip With A Torsional Impact Hammer Ryan Wedel, Shaun Mathison, and Greg Hightower, Ulterra Drilling Technologies, Craig Staley, Chesapeake Energy Copyright
More information2 1 /8 in Neyrfor TTT. Thru Tubing Turbodrill
2 1 /8 in Neyrfor TTT Thru Tubing Turbodrill In 1956, the first Neyrfor turbodrill was developed. Today, Neyrfor turbodrilling systems have become more advanced and power-efficient than ever before. Based
More informationAxeBlade. Ridged diamond element bit
AxeBlade Ridged diamond element bit Instantaneous ROP Improvement. Better Steerability. The AxeBlade* ridged diamond element bit positions Axe* elements along the bit face to achieve increased ROP and
More informationONYX 360. Rolling PDC cutter
ONYX 360 Rolling PDC cutter ONYX 360 Rolling PDC Cutter Applications Drilling conditions that cause and accelerate PDC cutter wear Abrasive environments Benefits Extends bit durability Increases run footage
More informationPowered Rotary Steerable System Technology
Powered Rotary Steerable System Technology B.Antony Fayaz 1,Govindan.S 2 1,2 Department of Petroleum Engineering, AMET University, Chennai -603112 Abstract: As the demand of hydrocarbons are growing high
More informationA HYBRID SOLUTION. Combining the best characteristics of both PDC and rollercone bits, Tim Beaton, Shear Bits, USA, champions a new type of drill bit.
A HYBRID SOLUTION Combining the best characteristics of both PDC and rollercone bits, Tim Beaton, Shear Bits, USA, champions a new type of drill bit. A new type of patent pending drill bit created for
More informationDrilling Jars Coiled Tubing Jars Impactors & Drivers When You Need It
1 Drilling Jars Coiled Tubing Jars Impactors & Drivers When You Need It Higher Impact Easier Control Unique Design 2 ABOUT G-FORCE G-Force J28GF G-FORCE JARS, LLC was founded by staff that has over 50
More informationSPE MS. Abstract
SPE-179088-MS Optimizing Bridge Plug Milling Efficiency Utilizing Weight-On-Bit to Control Debris Size: A Comparative Study of the Debris Size vs Weight-On-Bit Utilizing Five Bladed Carbide Mill, Tri-Cone
More informationAbout Cobra Downhole Motors
February 2016 1 About Cobra Downhole Motors Cobra Downhole Motors combines new material technology and innovative product features with a customer driven approach. We add value to our customers drilling
More informationAbout Cobra Downhole Motors
October 2017 1 About Cobra Downhole Motors Cobra Downhole Motors combines new material technology and innovative product features with a customer driven approach. We add value to our customers drilling
More informationCoiled-Tubing High Pressure Jet Drilling System
A Noble Drilling Corporation Subsidiary Coiled-Tubing High Pressure Jet Drilling System April 19, 2001 Dr. William C. Maurer TT00-38 1 Exxon High Pressure Drill Rig HP Pump HP Rotary Hose HP Swivel HP
More informationPDC BITS PRODUCT BROCHURE
PDC BITS PRODUCT BROCHURE 2 Infinity Tool Manufacturing provides a complimentary line of down the hole bits, horizontal directional drilling consumables and various drilling accessories. With a facility
More informationEND OF WELL REPORT. UL G 9-46 Unit 2H. ANDREWS COUNTY, TX Trinidad 121 May 11, Report Prepared By:
UL G 9-46 Unit 2H END OF WELL REPORT END OF WELL REPORT UL G 9-46 Unit 2H ANDREWS COUNTY, TX Trinidad 121 May 11, 2017 Report Prepared By: Tom Schmidt Operations Coordinator Nephi Smith Well Planner of
More informationCommon Coiled Tubing Drilling (ComCTD)
Common Coiled Tubing Drilling (ComCTD) www. renhesun.com 2-1/2 in. Common Coiled Tubing Drilling-Wireline (ComCTD-2W) Features Flexible setup the integrated CTD system Data transmission & communication
More informationProduct Portfolio. Behind every bit is a company that knows every bit about it. When Every Run Counts TM. An ESCO Oil & Gas Company
An ESCO Oil & Gas Company Product Portfolio Behind every bit is a company that knows every bit about it. When Every Run Counts TM Ulterra designs and manufactures high- ULTERRA Advantages Fast and effective
More informationAADE 2009NTCE DYNAMIC BHA ANALYSIS PROGRAM AND OPERATION ROAD MAP OPTIMIZES HOLE ENLARGEMENT WHILE DRILLNG PERFORMANCE, MARS BASIN - GoM
2009 NATIONAL TECHNICAL CONFERENCE & EXHIBITION, NEW ORLEANS, LOUISIANA AADE 2009NTCE-04-01 DYNAMIC BHA ANALYSIS PROGRAM AND OPERATION ROAD MAP OPTIMIZES HOLE ENLARGEMENT WHILE DRILLNG PERFORMANCE, MARS
More information19,683 8,
General Information Well Name & No Report # Date MD TVD AFE AFE Amount Company Rep UL MS HZ BLK 6 Unit #3107 1 8/19/017 Rig Information 105 105 D-017-006 Wilson / Mahan Category Field Operator Daily Ftg
More informationMotor Handbook. 4th Edition Ver. 1.0a ALL RIGHTS RESERVED. Issue Date; December 23, 2013 Wenzel Downhole Tools
MOTOR HANDBOOK Motor Handbook 4th Edition Ver. 1.0a Issue Date; December 23, 2013 Wenzel Downhole Tools ALL RIGHTS RESERVED The information contained in this manual is provided for informational and illustration
More informationMANUFACTURING. PD Impact Tools
PD Impact Tools Upper Connector MANUFACTURING Drive Mandrel Female Spline Bearing Female Spline PD Impact Tools optimize your drilling operations. Knocker Housing Knocker Pressure Piston Hydraulic Mandrel
More informationCasing Drilling- Recent Advances for Drilling Challenges. Allen Sinor Hughes Christensen- A Baker Hughes Company The Woodlands, Texas
Casing Drilling- Recent Advances for Drilling Challenges Allen Sinor Hughes Christensen- A Baker Hughes Company The Woodlands, Texas SPE Gulf Coast Section January 10, 2001 Casing Drilling History Casing
More informationGyrodata Incorporated
Gyrodata is an independent supplier and service provider delivering precision wellbore placement and evaluation solutions for drilling, completions and production challenges. Since 1980, we have been partnering
More informationDrilling 3 Mile Horizontal Wells in the Williston Basin February 17, Justin Beougher Sr. Drilling Engineer
Drilling 3 Mile Horizontal Wells in the Williston Basin February 17, 2016 Justin Beougher Sr. Drilling Engineer Overview Williston Basin Introduction Why 3 Mile Laterals? Pad Progression Drilling Analytics
More informationGyrodata Incorporated
Gyrodata is an independent supplier and service provider delivering precision wellbore placement and evaluation solutions for drilling, completions and production challenges. Since 1980, we have been partnering
More informationNeyrfor Turbodrill Handbook
Neyrfor Handbook Neyrfor Handbook Schlumberger 375 Briarpark Drive Houston, Texas 7742 www.slb.com Produced by Schlumberger Marketing Communications Copyright 212 Schlumberger. All rights reserved. No
More informationAtlas Copco Oil and Gas Rigs. The Predator Advantage
Atlas Copco Oil and Gas Rigs The Predator Advantage Atlas Copco Drilling Solutions Leading supplier globally of rotary drilling equipment Three manufacturing locations Garland, Texas, USA Nasik, India
More informationCasing Drilling Technology Implementation In Petrom
Casing Drilling Technology Implementation In Petrom Presentation Outline Background Overview of Petrom Casing Drilling achievements to date Benefits To Petrom from Casing Drilling Case History 228 Sotanga
More informationRotary Steerable Drilling Systems Enable Single Trip runs for Larger Hole Craig Sidwell, Greg Conran, Rob Utter Schlumberger Drilling & Measurements
AADE-03-NTCE-49 Rotary Steerable Drilling Systems Enable Single Trip runs for Larger Hole Craig Sidwell, Greg Conran, Rob Utter Schlumberger Drilling & Measurements Copyright 2003 AADE Technical Conference
More informationCoiled Tubing Tools Table of Contents Primary Tools Slim Line Dimple / Slip Connector...Page 6 Full Size Dimple / Slip Connector...Page 6 Slimconnect External Slip Connector...Page 7 External Slip Connector...Page
More informationInnovative Landing String system for ultra-deep offshore
Innovative Landing String system for ultra-deep offshore V. Flores, J.Franchi, S. Granger Vallourec Drilling Products A. Vierke, J. Grotherr Blohm+Voss Oil Tools Introduction Offshore industry trends:
More informationDownhole Power Systems Drilling further and faster
Downhole Power Systems Drilling further and faster Our products many of them unique are widely recognized for their ingenuity, simplicity and effectiveness in ensuring that customers reach their objectives
More informationThe Impact of Well Features on CT Reach. Presented by Patrick Kelleher
The Impact of Well Features on CT Reach Presented by Patrick Kelleher ICoTA Calgary Round Table 2014 October 29, 2014 Based on Forthcoming SPE-173666-MS Patrick Kelleher, Ken Newman - Athena Engineering
More informationInnovative, application-specific drill bit designs prove value, help operators set drilling records
Innovative, application-specific drill bit designs prove value, help operators set drilling records By Jerry Greenberg, contributing editor A WELL IS successful as a result of a drill bit with the correct
More information26mm SDS Plus Rotary Hammer
26mm SDS Plus Rotary Hammer Product Objectives Develop a high class product equipped with built in dust extraction vibration absorbing housing and high power output Designed to suit the needs of builders
More informationOur thru-tubing motors deliver performance right where you need it. Downhole.
Our thru-tubing motors deliver performance right where you need it. Downhole. Delivering Downhole Performance 1 11/16 5-6 2.3 Stg EVEN WALL MOTOR SPECIFICATIONS 1 11/16 5-6 2.3 Stg EVEN WALL MOTOR SPECIFICATIONS
More informationDown-the-hole drill strings
Secoroc Rock Drilling Tools Down-the-hole drill strings Secoroc high quality DTH drill string equipment for Atlas Copco waterwell drill rigs: T2W, T3W, T3WDH, TH60, TH60DH T4W, T4WDH Atlas Copco waterwell
More informationAccelerating the Oilfield, Empowering the Industry
Accelerating the Oilfield, Empowering the Industry Presentation for ROMANIA UPSTREAM CONFERENCE 13 th March 2012 Andy Thompson Tercel Oilfield Products About Tercel Tercel Oilfield Products is a designer
More informationCompletion Solutions Inc.
Completion Solutions Inc. Simple Designs That Simply Work! Company Introduction Dec 2012 1 Who is Completions Solutions Inc? Founded in 2012 Focused on efficient and economical well bore stimulation (both
More informationDaily Drilling Report
Page of 4238338873 00 24.0 24.0 RIG PATTERSON 30 FIELD NAME SPRABERRY (TREND AREA) AUTH 5,605.00 PLANNED DOW 2.40 (days) DFS 0.00 (days) -24-204 WB KO WELL SPUD RIG RELEASE SUPERVISOR ENGINEER PB JAMES
More informationLEE NAK GUI TCP SERVICE COORDINATOR APPS
Live Well Deployment System LEE NAK GUI TCP SERVICE COORDINATOR Challenges Monobore completion High angle wells Long perforation intervals Underbalanced perforating (static or dynamic) Well control barriers
More information2013 Latin America Perforating Symposium. SLAP-23 Perforating Options Available Today in Horizontal Shale Oil and Gas Wells. Kerry Daly, Weatherford
2013 Latin America Perforating Symposium Perforating Options Available Today in Horizontal Shale Oil and Gas Wells Kerry Daly, Weatherford Typical Eagle Ford Well Costs Total well cost approximately $10
More informationDrill Collars. Drill collars from VAM Drilling are available with the following features:
73 Drill Collars Drill collars are thick-walled tubular pieces machined from solid steel bars, forming a component of the bottom hole assembly that provides weight-onbit for improved drilling performance.
More information1 st Run in Russia Novatek (largest independent gas producer) TCE700 lands intermediate 7 casing on ERD well in Yarudeyskoye field
1 st Run in Russia Novatek (largest independent gas producer) TCE700 lands intermediate 7 casing on ERD well in Yarudeyskoye field Land critical 7 intermediate casing at near horizontal through notorious
More informationRotary Snubbing Technology Option for Long Reach
Rotary Snubbing Technology Option for Long Reach Horizontal Completions Presentation Overview Completion Program & Well Data Case History Underbalanced Rotary Equipment Technology Accomplishments Results
More informationIntervention Barriers
Intervention Barriers A barrier is defined as a means of containing wellbore pressure and fluids. Two effective barriers are required for most intervention operations. Consider when barriers are effective
More informationpresented by Y. C. Lam & Tim Leung 21 May 2005
Ground Investigation by Horizontal Directional Drilling presented by Y. C. Lam & Tim Leung 21 May 2005 2 Horizontal Directional Drilling (HDD) Working Principle Construction Procedure Recent Application
More informationFORWARD-LOOKING INFORMATION
Peters & Co. Annual Energy Conference September 13, 2017 Forward Looking FORWARD-LOOKING INFORMATION This presentation may contain certain statements or disclosures relating to Xtreme Drilling Corp. (
More informationEndeavor Energy Resources, LP. DAILY DRILLING REPORT
Rigging up SPUD 8// Robert Soliz COST: Drilling Completion Report # 66, 66, Rig Number: 575--8657 Cell Number: 86-777-48 6 6: Skid Rig Move in & R/U, Build New spool for flowline, Move solids control equipment
More informationDAILY DRILLING REPORT
General Information LEASE UNIVERSITY EAST COUNTY, STATE CROCKETT, TEXAS OPERATOR EP ENERGY OPERATOR REPRESENTATIVE PERRY EVANS Texas Railroad Commission TRRC JOB NUMBER DISPATCH TRRC CONTACT DATE 2/1/2014
More informationHighlights of Achievements at Loc. TU
Highlights of Achievements at Loc. TU Planned-80 days / Actual-74 days. Different BHAs for drilling in rotary mode designed by in-house expertise. Sliding was limited to
More informationDAILY DRILLING REPORT
General Information LEASE UNIVERSITY EAST COUNTY, STATE CROCKETT OPERATOR EP ENERGY OPERATOR REPRESENTATIVE PERRY EVENS Texas Railroad Commission TRRC JOB NUMBER DISPATCH TRRC CONTACT DATE 1/1/2014 Casing
More informationHYDRAULIC WORKOVER SERVICES
HYDRAULIC WORKOVER SERVICES Technology at work for you. Cudd Energy Services (CES) offers a diversified portfolio of solutions for today s well challenges. From a simple completion job to a complex well
More informationDaily Activity Report
605 Richard Arrington Blvd. Daily Activity Report Drilling Activity API Code: 4249533363 Well User ID : 43UNIV204801 Operator : Energen Resources Corp S/T/R : 48// County, St. : Winkler, TX Field : WILDCAT
More informationDAILY DRILLING REPORT DATE : 08/01/2012
DAILY DRILLING REPORT DATE : 08/01/2012 FIELD: SOUTH MIDLAND MD : 80 TVD : 80 DOL: 2 DSS: -1 STATE: TX CROCKETT PROGRESS : FOREMAN: REGION: MID-CON REGION HRS AFE #: 11DC120289 API #: 4210541480 RIG CONTR:
More informationDAILY DRILLING REPORT
General Information LEASE UNIVERSITY EAST COUNTY, STATE CROCKETT, TEXAS OPERATOR EP ENERGY OPERATOR REPRESENTATIVE PERRY EVANS Texas Railroad Commission TRRC JOB NUMBER DISPATCH TRRC CONTACT DATE 1/28/2014
More informationCMG Compact Motor Gear
INNOVATIVE DRIVE TECHNOLOGY CMG Compact Motor Gear Model range CMG 05 - CMG 601 for torques from 500 Nm to 150,000 Nm Model range CMG 05 - CMG 601 CMG Compact Motor Gear Originally designed for driving
More information18mm SDS Plus Rotary Hammer
18mm SDS Plus Rotary Hammer Product Objectives Designed to suit the needs of demolition crews, concreters, builders, electricians plumbers and any looking to undertake masonry drilling Develop 2 new high
More informationSERVICE PARTS LIST 1-1/8" ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg.
00 0 200 204 276 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS PAGE 1 OF 3 BULLETIN NO.
More informationAustralian Geothermal Conference Abstract. Purpose. Geothermal power market. General design & manufacturing. Technology.
Genie Impact Drills Synopsis of a New Hard Rock Drilling Development Malcolm B McInnes FIEAust. CPEng MESc BE ARMIT Mech Eng MAIE SPE Specialised Drilling Services Australia Pty Ltd PO BOX 297, Fullarton,
More informationIntroduction. PDC The Benefits. PDC Bits. PDC Reamers. DTH Bits. DTH Hole Openers. Drag Bits. Bit Repair
1 PRODUCT BROCHURE 2 Introduction 3 PDC The Benefits 5 PDC Bits 6 PDC Reamers 20 DTH Bits 22 DTH Hole Openers 24 25 Drag Bits Bit Repair 26 3 Infinity Tool Mfg manufacture an industry-leading line of down
More informationGeneral Information Daily Summary Information Daily Cost Information Rig Information UL 6-40 UNIT #105LS 1 1/4/ D-003 JUSTIN/GLEN
UL 6-40 UNIT #05LS /4/206 05 05 205-D-003 JUSTIN/GLEN SB DANIEL County/Parish State Ftg Rotate Cum Ftg Ft Slide Cum Ft ANDREW TEXAS Daily Mud CUM MUD COST H&P #625 7,282 9,484 432-254-2230 Surface Intermediate
More informationAADE-05-NTCE-57. Abstract
AADE-05-NTCE-57 Development and Applications of Unique Fixed Cutter Bit Technologies to the Spraberry Field of West Texas John Harris, James Cunningham, Pioneer Natural Resources Bill Stark, Robert Gum,
More informationTURBODRILLS. Integra Group of Companies
TURBODRILLS Integra Group of Companies 2014 2 AGENDA 1. Integra Group company structure, Products &Services 2. VNIIBT-Drilling Tools company history, structure, manufacturing centers & products 3. Patents
More informationDaily Drilling Summary Report
Date: 12/22/16 Rig: Norton Rig #2 Daily Cost: $32,507 Report #: 3 Current Depth: Progress Last 24 Hrs: 1628 Cum Cost: $268,248 Norton Rig #2 finished PU BHA, tested motor, filled conductor. Spudded well
More informationShort Fast Strong.
Short Fast Strong www.downholetechnology.com Designed and Manufactured for Speed and Reliability During Frac Operations Boss Hog frac plugs are short, fast and strong. More than 35,000 Boss Hog plugs have
More informationLORD TFD Steering Units FOR STEER-BY-WIRE SYSTEMS
LORD TFD Steering Units FOR STEER-BY-WIRE SYSTEMS Steer-by-Wire Systems in Industrial and Off-Highway Equipment Electro-hydraulic and fully-electric Steer-by-Wire (SbW) systems are gaining favor over traditional
More informationSPE/IADC Copyright 2007, SPE/IADC Drilling Conference
SPE/IADC 154 Drilling Tests of an Active Vibration Damper Martin E. Cobern SPE, Carl A. Perry, Jason A. Barbely & Daniel E. Burgess, APS Technology, Inc. and Mark E. Wassell SPE, APS Oilfield Services,
More informationCUSTOMER WELL NAME COUNTY, STATE
DRILLING SYSTEMS PROPOSAL FOR CUSTOMER WELL NAME COUNTY, STATE Presented By: Joe Lyons VP Sales / Business Development Mike Grupa Sr. Directional Coordinator Table of Contents 1 Company Profile 2 Proposed
More informationSafety, Mobility, and Power Density The Case for a 2-Rig Strategy DUG Permian-Fort Worth, TX USA Mike Dynan, VP Portfolio and Strategy April 4, 2017
, Mobility, and Power Density The Case for a 2-Rig DUG Permian-Fort Worth, TX USA Mike Dynan, VP Portfolio and April 4, 2017 We all have seen the headlines The Slow Road Back: Oil & Gas Industry Outlook
More informationPSW102 type CT powered protection unit
PSW102 type CT powered protection unit Summary PSW102CT self-powered protection device is a 10Kv feeder protection device which has the function of over current, fast breaking protection and grounding
More informationRS-110 Rainfall Sensor Installation Guide
RS-110 Rainfall Sensor Installation Guide for XR440 and XR5 Data Loggers September 2015 Revision 1.1 1 Disclaimer The following warranty and liability disclaimer apply to this product. PACE SCIENTIFIC
More informationMLC Opertating. Released rig at 700 AM on 7/23/2015. Rigging down rig. Breakdown of Operations
MLC Opertating Daily Drilling Report Date: 7/22/21 Spud Date: 6/27/21 at 1 hours Days F/ Spud: 26 Operator: MLC Operating Consultant: Mike Satterfield/Dean Johnson Pres. Depth: 11,67 Well Name & #: From
More informationTMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS
TMK QUANTUM Infinity Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity TMK QUANTUM Infinity ball-actuated sliding sleeve system utilizes a revolutionary, patent pending electronic counter
More informationDUAL-PHASE STEEL APPLICATION FOR HIGH VENT BACKBONE WHEEL CONCEPTS
DUAL-PHASE STEEL APPLICATION FOR HIGH VENT BACKBONE WHEEL CONCEPTS Presented by Tom Heck Hayes Lemmerz International Inc. Agenda The High Vent Wheel Concept High Vent Products Concept Challenges Dual Phase
More informationBoomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity
More informationDriving Automotive Innovation Cylinder Deactivation
Driving Automotive Innovation Cylinder Deactivation Dr. James McCarthy, Jr September 13, 2016 902 Senate Hart Building, Washington, D.C. Challenge: Move Peak Efficiency Islands to the Driver Operating
More informationALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT
ALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT Bentec rigs and drilling rig equipment Bentec branches BENTEC Advanced Technology for comprehensive drilling solutions. With years of experience,
More informationHydraulic Pump and Track Motor for Hydrostatic Transmission
KYB TECHNICAL REVIEW No. 55 OCT. 2017 Product Introduction Hydraulic Pump and Track Motor for Hydrostatic Transmission INADA Takanori, MIURA Takuya, MATSUZAKA Keita 1 Introduction 2 Hydraulic Pumps There
More informationDEVELOPMENTS IN UTICA SHALE ECONOMIC POTENTIAL
DEVELOPMENTS IN UTICA SHALE ECONOMIC POTENTIAL Michael Morgan, P.Eng., Ph.D. THREE MAIN POINTS How are new technologies implemented in the oil and gas sector? Which new technologies and/or new applications
More informationWell Name: UNIVERSITY Surface Location: 1980 FNL, 1757 FWL - WARD, TX. API Code:
Report No: 1 Report Date: 6/5/2015 Surface Location: 1980 FNL, 1757 FWL - WARD, TX Report No: 1 Rpt T. Activity: 01 - Rig Up & Tear Down AFE #: PBE1510032 Operation Desc: RIGGING DOWN. RIG IN TRANSPORT.
More informationVDD 200 Super Single Rig - Automated Pipehandling System
Chapter 1 - General General Rack and Pinion Max. Hoisting Capacity Max. Pushing Capacity 72.8 short tons (66 metric tonnes) Max. Drilling Depth 11,480 ft (3,500 m) Operating Tubulars Range III - Singles
More information