Neyrfor Turbodrill Handbook
|
|
- Randall Turner
- 5 years ago
- Views:
Transcription
1 Neyrfor Handbook
2 Neyrfor Handbook
3 Schlumberger 375 Briarpark Drive Houston, Texas Produced by Schlumberger Marketing Communications Copyright 212 Schlumberger. All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transcribed in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written permission of the publisher. While the information presented herein is believed to be accurate, it is provided as is without express or implied warranty. 12-DT-1 An asterisk (*) is used throughout this document to denote a mark of Schlumberger. Other company, product, and service names are the properties of their respective owners.
4 Innovative Leaders in Superior Performance ing Neyrfor* turbodrilling technology has led the industry for over half a century. With a history of unmatched drilling performance and reliability in the industry, our tools, technology and operational expertise provide customers with superior drilling efficiency in a broad range of drilling applications. While turbodrills are often associated with extreme applications such as HPHT or hard rock drilling, Neyrfor s* consistently deliver enhanced performance in conventional drilling applications including: vertical performance drilling s-shape, tangent, and horizontal directional drilling sidetracking milling re-entries extended reach medium- and long-radius drilling Regardless of the application, Neyrfor s provide high performance and precise directional control without sacrificing hole quality or ROP, even at extreme depths and downhole environments. Handbook
5 The ing Advantage Energy Efficiency Both Neyrfor turbodrills and PDMs are in essence energy conversion devices, converting the hydraulic energy of the drilling fluid into mechanical energy to drive the drill bit. As such the actual power delivered is very dependent on the efficiency of the energy conversion. Because of the intrinsic nature of the free-running and concentric balanced design of a turbodrill, it is far more efficient than conventional drilling motors. Power Output The superior energy efficiency of the turbodrill translates directly into more power available at the bit to sheer and grind the rock faster for higher rates of penetration. And, because the power output of the turbodrill does not deteriorate over time, the turbodrill maintains its uniformly high power output throughout every run. Reliability and Operating Life Neyrfor turbodrills, designed as precision high performance downhole tools, routinely achieve downhole run times of over 4 hours and, in some circumstances, even above 6 hours. Vibration Mitigation Excessive downhole vibrations have been shown to damage expensive downhole electronics, contribute to accelerated bit wear and adversely affect the efficiency of the total drilling operation. The concentric rotation of the turbodrill allows the passage of drilling fluid through the tool to rotate the drive shaft at a high RPM while remaining dynamically stable about the geometric axis. The absence of lateral vibration (off-center motion) means that a greater portion of the available energy generated by the turbodrill is applied directly to the formation. HPHT Capability The all metallic turbodrill configuration has no elastomer material in the power to degrade in harsh drilling environments, therefore tool performance is exceptional even in high temperatures and pressures.
6 Directional Capability For any given bent housing angle, turbodrills have been shown to provide greater directional responsiveness and thus can deliver a higher DLS when it is necessary to achieve directional objectives or can achieve normal requirements with a lesser bend. Also, turbodrills operate with much less fluctuating and reactive torque than PDMs making it much easier to control and predict the tool face and resultant directional response. Underbalanced Drilling Capability s can operate effectively in applications where two-phase drilling fluid is used. In critical applications where there are concerns about fluid contamination of the reservoir, turbodrilling with highly gas-cut mud systems can help ensure that both drilling and production objectives are met. Borehole Quality Goal: Maximize Wellbore Value. turbodrills consistently deliver a smooth and concentric wellbore. With the superior toolface control and use of stabilization on the turbodrill, hole spiraling and micro doglegs are minimized. The result is a hole with minimal rugosity, this enhances wellbore evaluation, casing running, cementing, and the minimization of problems drilling ahead Cost-per-Foot The ultimate advantage of a turbodrill is the tool s ability to consistently deliver lower operating cost by reducing drilling time. The value of the more robust, high performance turbodrill is realized by increased ROP, the substantial reduction in tripping time due to non-planned events and the increase in operational efficiency derived from more time on bottom due to high tool reliability than conventional drilling motors. Handbook
7 Custom Configurations for Every Application Straight-Hole High-Performance ing In straight-hole vertical applications, the stabilizer configuration of the Neyrfor turbodrill combined with the much lighter weight on bit required compared to rotary or PDM assemblies, results in a natural dropping tendency. This tendency provides a high-performance drilling solution which maximizes ROP, produces a high-quality wellbore and very consistently maintains verticality. Coupled with unsurpassed downhole longevity and reliability, this makes the turbodrill the obvious choice for operators seeking to minimize drilling time and reduce operating costs. Directional and Horizontal ing Neyrfor turbodrills excel in the demanding world of directional and horizontal drilling. With the ability to offer consistent, predictable build rates, combined with unmatched toolface control, the Neyrfor Delta* and Neyrfor Traditional* turbodrills ensure that directional objectives can be achieved in the most demanding applications. The directional turbodrill has an outstanding track record providing superior performance in extreme applications such as sidetracking operations below 22, ft TVD in HPHT environments. In its robust, all-metallic configuration, the exceptional durability of the turbodrill has allowed it to completely drill both legs of dual-lateral wells in a single run without tripping out of the hole. Thru-Tubing ing With the most power of any slim-hole drive system, the Neyrfor TTT* thru-tubing turbodrill offers the operator the ability to achieve maximum performance in any thru-tubing operation. The design superiority of turbodrills makes them the preferred solution to provide a performance advantage in low bottom-hole pressure environments, in two-phase gasified fluid systems, in acidizations, and in hot-hole production environments. Notably, the Neyrfor TTT s ability to run on large percentages of gas, rather than just fluid, allows continuous well production during remedial and underbalanced drilling operations.
8 Contents Neyrfor LC3 Locking Clutch...1 Neyrfor TTT Series...5 Tool Size Old Nomenclature New Nomenclature in...T111 MK2 FBS...Neyrfor TTT... 6 Neyrfor Traditional Series...11 Tool Size Old Nomenclature New Nomenclature in...T1 MK2 FBS...T112 Steerable in...T2 MK2 FBS...T122 Steerable in...T1 MK2 FBS...T112 Steerable in...T2 MK2 FBS...T122 Steerable in...T1 MK1 FBS...T111 Steerable in...T1XL MK1 FBS...T111XP Steerable in...T1 MK2 FBS...T112 Steerable in...T1XL MK2 FBS...T112XP Steerable in...T1 MK3 FBS...T113 Steerable in...T1XL MK3 FBS...T113XP Steerable in...T2 MK1 FBS...T121 Steerable in...T2 MK2 FBS...T122 Steerable in...T1 MK1 FBS...T111 Steerable in...T1XL MK1 FBS...T111XP Steerable in...T1 MK2 FBS...T112 Steerable in...T1XL MK2 FBS...T112XP Steerable in...TSH MK2 FBS...T112HF Steerable in...T1 MK3 FBS...T113 Steerable in...T1XL MK3 FBS...T113XP Steerable in...TSH MK3 FBS...T113HF Steerable in...T2 MK1 FBS...T121 Steerable in...T2 MK2 FBS...T122 Steerable in...T1 MK1 FBS...T111 Steerable in...T2 MK1 FBS...T121 Steerable in...T3 MK1 FBS...T131 Steerable in...T1 MK1 FBS...T111 Steerable in...T1 MK2 FBS...T112 Steerable in...TSH MK2 FBS...T112HF Steerable in...TSH MK3 FBS...T113HF Steerable in...T2H MK2 FBS...T122HF Steerable in...T2H MK3 FBS...T123HF Steerable in...T2 MK1 FBS...T121 Steerable in...T2 MK2 FBS...T122 Steerable Neyrfor Delta Series...79 Tool Size Old Nomenclature New Nomenclature in...NA...D211 Steerable in...T1XL MK1 FBS...D211XP Steerable Handbook
9 Contents Neyrfor Delta Series, continued Tool Size Old Nomenclature New Nomenclature in...T1 MK2 FBS...D212 Steerable in...T1XL MK2 FBS...D212XP Steerable in...T1 MK3 FBS...D213 Steerable in...T1 MK1 FBS...D211 Steerable in...T1XL MK1 FBS...D211XP Steerable in...T1 MK2 FBS...D212 Steerable in...T1XL MK2 FBS...D212XP Steerable in...TSH MK2 FBS...D212HF Steerable Appendix...11 Neyrfor Nomenclature...12 Approximate Shipping Weights...13 Mud Quality Guidelines...14 Neyrfor Specifications...15 Hole Curvature Calculation...16 Radius of Curvature Calculation...16 Triplex Pump Output...16 Total Flow Area Comparison of Values...17 Buoyancy and Drilling Fluid Density...17 Drilling Fluid Density...18 Weights of 31-ft Drill Collars...11 Heavy-Weight Drillpipe Properties Drillpipe Properties Rotary-Shouldered Connection Interchange List Engineering Formulae...114
10 Neyrfor LC3 Locking Clutch Neyrfor LC3 Locking CLutch Handbook 1
11 Neyrfor LC3 Locking Clutch Drilling environments that induce bit sticking can certainly benefit from using the Neyrfor LC3* turbodrill locking clutch system. When added to a Neyrfor Traditional or Neyrfor Delta series configuration, it assists in freeing the bit if it becomes stuck during drilling or reaming. The clutch engages when the turbodrill drive shaft stops or the rpm is below that of the rotary string speed. Accordingly, the string along with the turbodrill housing and the resulting connected output drive shaft linked together by the locking clutch allows the operators to apply string torque directly to the bit by the LC3* clutch system from the top drive or rotary table. Once the bit has become free, the clutch disengages and normal drilling operations can be resumed. Bit type and directional well applications are evaluated on a per well basis. LC3 Performance Improvements Material Changes 1,4% Improvement in Fracture Toughness Design Modification 25% Improvement in Drilling Mode Wear Optimized placement to be run with both Neyrfor Traditional and Neyrfor Delta series turbodrills 1% Improvement in Reliability while Drilling Directional Wells. 2
12 Locking clutch pawl engaged to outer housing transmits torque through the string from the rotary table or top drive. Locking clutch pawl in drilling mode. Neyrfor LC3 Locking CLutch Handbook 3
13
14 Neyrfor TTT Thru-Tubing s Neyrfor TTT Thru-Tubing s Handbook 5
15 Neyrfor TTT 2 7/8 in 2-Phase Flow Summary Tool Specifications Type TTT T1-FBS T2-FBS Size, in Length, ft Operational Data Dual-phase flow Fluid, galus/min Gas, scf/min Operating torque, ft.lbf Stall torque, ft.lbf Operating speed, rpm 2,5+ 2,5+ 2,+ Pressure drop, psi Notes: 1. Calculations based on approximately 2% water + 8% nitrogen (dual, or two-phase) fluid system at inlet greater or lesser % of gas is possible depending on operator requirements and application conditions 2. For the purposes of modeling, bottomhole conditions shown are for bottomhole pressure of 1, psi and bottomhole temperature of 425 F 3. mechanical power output modeling based on achieving a minimum 3. hp/in2, 2 7/8-in tool with 3½-in bit 4. Please consult your local Schlumberger office for individual application modeling and turbodrill system customization 6
16 TTT Neyrfor TTT Thru-Tubing Handbook 7
17 Neyrfor TTT in TTT MK2 Tool Summary Tool Specifications Turbine diameter in [73.3 mm] (A) Overall length ft [4.85 m] (B) Bit to center of stabilizer B.4 ft [.1 m] (C) Bit to bend NA [NA] (D) Bit to center of stabilizer D NA [NA] Top connection in PAC box in PAC box Bit connection PAC pin PAC pin Total tool weight 284 lbm [128.8 kg] Bend settings NA NA Recommended bit sizes in to in [83 mm to 12 mm] Operational Data RPM range/revolution per gallon 1,45 to 2,8 rpm 23. rev/gal Pressure drop range 1,2 to 2,5 psi 1,2 to 2,5 psi Max. power output 71 hp [53 kw] Max. stall torque 399 ft-lbf [541 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1,
18 A TTT Neyrfor TTT Thru-Tubing B Handbook 9
19
20 Neyrfor Traditional Series Neyrfor Traditional Series Handbook 11
21 2 7 8-in T112 Steerable in T1 Mk2 FBS Tool Summary Tool Specifications Turbine diameter in [73.3 mm] (A) Overall length 21.5 ft [6.55 m] (B) Bit to center of stabilizer B 1.8 ft [3.29 m] (C) Bit to bend 3.1 ft [.94 m] (D) Bit to center of stabilizer D.4 ft [.1 m] Top connection in PAC box in PAC box Bit connection in PAC pin or in API Reg Pin in PAC pin or in API Reg Pin Total tool weight 392 lbm [177.8 kg] Bend settings to 2. to 2. Recommended bit sizes in to in [83 mm to 12 mm] Operational Data RPM range/revolution per gallon 1,6 to 2,9 rpm 23. rev/gal Pressure drop range 1,1 to 2,7 psi 1,1 to 2,7 psi Max. power output 76 hp [57 kw] Max. stall torque 327 ft-lbf [443 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 12
22 Power A B Neyrfor Traditional Series Bearing C D Handbook 13
23 2 7 8-in T122 Steerable in T2 Mk2 FBS Tool Summary Tool Specifications Turbine diameter in [73.3 mm] (A) Overall length 32.3 ft [9.85 m] (B) Bit to center of stabilizer B 21.6 ft [6.58 m] (C) Bit to center of stabilizer C 1.8 ft [3.29 m] (D) Bit to Bend 3.1 ft [.94 m] (E) Bit to center of stabilizer E.4 ft [.1 m] Top connection in PAC Box in PAC Box Bit connection in PAC pin or in API Reg Pin in PAC pin or in API Reg Pin Total tool weight 59 lbm [267.6 kg] Bend settings to 2. to 2. Recommended bit sizes in to in [83 mm to 12 mm] Operational Data RPM range/revolution per gallon 1,33 to 2,4 rpm 23. rev/gal Pressure drop range 1,35 to 2,72 psi 1,35 to 2,72 psi Max. power output 75 hp [56 kw] Max. stall torque 329 ft-lbf [446 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 14
24 Power A B Neyrfor Traditional Series C Bearing D E Handbook 15
25 3 3 8-in T112 Steerable in T1 MK2 FBS Tool Summary Tool Specifications Turbine diameter in [85.73 mm] (A) Overall length 2.3 ft [6.19 m] (B) Bit to center of stabilizer B 9.7 ft [2.96 m] (C) Bit to bend 3. ft [.91 m] (D) Bit to center of stabilizer D.4 ft [.1 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 546 lbm [247.7 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [95 mm to 137 mm] Operational Data RPM range/revolution per gallon 1,5 to 2,46 rpm rev/gal Pressure drop range 1,4 to 2,85 psi 1,4 to 2,85 psi Max. power output 16 hp [79 kw] Max. stall torque 531 ft-lbf [72 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 16
26 Power A B Neyrfor Traditional Series Bearing C D Handbook 17
27 3 3 8-in T122 Steerable in T2 MK2 FBS Tool Summary Tool Specifications Turbine diameter in [85.73 mm] (A) Overall length 32.1 ft [9.78 m] (B) Bit to center of stabilizer B 21.5 ft [6.55 m] (C) Bit to center of stabilizer C 9.7 ft [2.96 m] (D) Bit to bend 3. ft [.91 m] (E) Bit to center of stabilizer E.4 ft [.1 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 867 lbm [393.3kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [95 mm to 137 mm] Operational Data RPM range/revolution per gallon 1,2 to 2, rpm rev/gal Pressure drop range 1,73 to 3, psi 1,73 to 3, psi Max. power output 16 hp [79 kw] Max. stall torque 563 ft-lbf [763 nm] power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 18
28 A B Power Neyrfor Traditional Series C Bearing D E Handbook 19
29 4 3 4-in T111 Steerable in T1 MK1 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 3.2 ft [9.2 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 5.63 ft [1.72 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,537 lbm [697.2 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 1,2 to 2,5 rpm 7.44 rev/gal Pressure drop range 1,15 to 3, psi 1,15 to 3, psi Max. power output 212 hp [152 kw] Max. stall torque 1,27 ft-lbf [1,722 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 2
30 Power A B Neyrfor Traditional Series Bearing C D Handbook 21
31 4 3 4-in T111XP Steerable in XL MK1 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 36.3 ft [11.17 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 5.63 ft [1.72 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,662 lbm [753.9 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 1,7 to 1,87 rpm 7.44 rev/gal Pressure drop range 1,2 to 3, psi 1,2 to 3, psi Max. power output 217 hp [162 kw] Max. stall torque 1,318 ft-lbf [1,787 nm] power output, hp ,5 3, 2,5 pressure drop, 2, psi 1,5 1, Build rate capabilities, / Hole angle, 22
32 Power A Neyrfor Traditional Series B Bearing C D Handbook 23
33 4 3 4-in T112 Steerable in T1 MK2 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 3.2 ft [9.2 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 5.63 ft [1.72 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,552 lbm [74. kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 86 to 1,6 rpm rev/gal Pressure drop range 1,25 to 3, psi 1,25 to 3, psi Max. power output 197 hp [147 kw] Max. stall torque 1,45 ft-lbf [1,95 nm] power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 24
34 Power A B Neyrfor Traditional Series Bearing C D Handbook 25
35 4 3 4-in T112XP Steerable in XL MK2 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 36.3 ft [11.17 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 5.63 ft [1.72 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,684 lbm [763.8 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 76 to 1,42 rpm rev/gal Pressure drop range 1,4 to 3, psi 1,4 to 3, psii Max. power output 191 hp [142 kw] Max. stall torque 1,491 ft-lbf [2,22 nm] power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 26
36 Power A Neyrfor Traditional Series B Bearing C D Handbook 27
37 4 3 4-in T113 Steerable in T1 MK3 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 3.2 ft [9.2 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 5.63 ft [1.72 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,549 lbm [72.6 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 95 to 1,66 rpm rev/gal Pressure drop range 1,25 to 3, psi 1,25 to 3, psi Max. power output 155 hp [116 kw] Max. stall torque 916 ft-lbf [1,242 nm] 16 power output, hp ,5 pressure drop, psi 3, 2,5 2, 1, Build rate capabilities, / Hole angle, 28
38 Power A B Neyrfor Traditional Series Bearing C D Handbook 29
39 4 3 4-in T113XP Steerable in XL MK3 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 36.3 ft [11.17 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 5.63 ft [1.72 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,79 lbm [775.2 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 84 to 1,48 rpm rev/gal Pressure drop range 1,3 to 3, psi 1,3 to 3, psi Max. power output 156 hp [116kw] Max. stall torque 1,189 ft-lbf [1,612 nm] 16 power output, hp pressure drop, psi 3,5 3, 2,5 2, 1, Build rate capabilities, / Hole angle, 3
40 Power A Neyrfor Traditional Series B Bearing C D Handbook 31
41 4 3 4-in T121 Steerable in T2 MK1 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 47.5 ft [14.48 m] (B) Bit to center of stabilizer B 29.3 ft [8.93 m] (C) Bit to center of stabilizer C 13.1 ft [4.2 m] (D) Bit to bend 5.63 ft [1.72 m] (E) Bit to center of stabilizer E.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 2,397 lbm [1,87.3 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 1,1 to 1,71 rpm 7.44 rev/gal Pressure drop range 1,38 to 3, psi 1,38 to 3, psi Max. power output 214 hp [16 kw] Max. stall torque 1,387 ft-lbf [1,881 nm] 25 power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 32
42 Power A B Neyrfor Traditional Series C Bearing D E Handbook 33
43 4 3 4-in T122 Steerable in T2 MK2 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65mm] (A) Overall length 47.5 ft [14.48 m] (B) Bit to center of stabilizer B 29.3 ft [8.93 m] (C) Bit to center of stabilizer C 13.1 ft [4.2 m] (D) Bit to bend 5.63 ft [1.72 m] (E) Bit to center of stabilizer E.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 2,437 lbm [1,15.4 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [143 mm to 171 mm] Operational Data RPM range/revolution per gallon 69 to 1,3 rpm rev/gal Pressure drop range 1,53 to 3, psi 1,53 to 3, psi Max. power output 19 hp [142 kw] Max. stall torque 1,457 ft-lbf [1,975 nm] 2 power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 34
44 Power A B Neyrfor Traditional Series C Bearing D E Handbook 35
45 6 5 8-in T111 Steerable in T1 MK1 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [1. m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,99 lbm [1,45.7 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 98 to 1,58 rpm 2.64 rev/gal Pressure drop range 98 to 2,2 psi 98 to 2,2 psi Max. power output 367 hp [274 kw] Max. stall torque 2,721ft-lbf [3,689 nm] power output, hp pressure drop, psi 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 36
46 Power A B Neyrfor Traditional Series Bearing C D Handbook 37
47 6 5 8-in T111XP Steerable in T1XL MK1 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [11.99 m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,716 lbm [1,43.6 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 85 to 1,38 rpm 2.64 rev/gal Pressure drop range 1,13 to 2,58 psi 1,13 to 2,58 psi Max. power output 375 hp [28 kw] Max. stall torque 3,334 ft-lbf [4,52 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 38
48 Power A Neyrfor Traditional Series B Bearing C D Handbook 39
49 6 5 8-in T112 Steerable in T1 MK2 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [1. m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,135 lbm [1,422. kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 76 to 1,35 rpm rev/gal Pressure drop range 96 to 2,21 psi 96 to 2,21 psi Max. power output 328 hp [245 kw] Max. stall torque 3,47 ft-lbf [4,131 nm] power output, hp pressure drop, psi 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 4
50 Power A B Neyrfor Traditional Series Bearing C D Handbook 41
51 6 5 8-in T112XP Steerable in T1XL MK2 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [11.99 m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,716 lbm [1,43.6 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 645 to 1,138 rpm rev/gal Pressure drop range 1,265 to 2,55 psi 1,265 to 2,55 psi Max. power output 321 hp [239 kw] Max. stall torque 3,582 ft-lbf [4,857 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 42
52 Power A Neyrfor Traditional Series B Bearing C D Handbook 43
53 6 5 8-in T112HF Steerable in TSH MK2 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [11.76 m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,75 lbm [1,71. kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 69 to 1,55 rpm 2.22 rev/gal Pressure drop range 1,5 to 3,2 psi 1,5 to 3,2 psi Max. power output 595 hp [444 kw] Max. stall torque 4,142 ft-lbf [5,616 nm] power output, hp ,5 3, 2,5 pressure drop, 2, psi 1,5 1, Build rate capabilities, / Hole angle, 44
54 Power A Neyrfor Traditional Series B Bearing C D Handbook 45
55 6 5 8-in T113 Steerable in T1 MK3 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [1. m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,154 lbm [1,43.6 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 72 to 1,32 rpm 3.23 rev/gal Pressure drop range 1,382 to 2,157 psi 1,382 to 2,157 psi Max. power output 215 hp [16 kw] Max. stall torque 2,11 ft-lbf [3,689 nm] 24 power output, hp ,5 2, 1,9 pressure drop, 1,6 psi 1,3 1, Build rate capabilities, / Hole angle, 46
56 Power A B Neyrfor Traditional Series Bearing C D Handbook 47
57 6 5 8-in T113XP Steerable in T1XL MK3 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [11.99 m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 68 to 1,14 rpm 3.23 rev/gal Pressure drop range 1,619 to 2,537 psi 1,619 to 2,537 psi Max. power output 217 hp [162 kw] Max. stall torque 2,464 ft-lbf [3,341 nm] power output, hp pressure drop, psi 2,7 2,4 2,1 1,8 1, Build rate capabilities, / Hole angle, 48
58 Power A Neyrfor Traditional Series B Bearing C D Handbook 49
59 6 5 8-in T113HF Steerable in TSH MK3 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [11.76 m] (B) Bit to center of stabilizer B ft [4.78 m] (C) Bit to bend 5.7 ft [1.74 m] (D) Bit to center of stabilizer D.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,75 lbm [1,71. kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 73 to 1,48 rpm 3.23 rev/gal Pressure drop range 1,549 to 3,169 psi 1,549 to 3,169 psi Max. power output 387 hp [289 kw] Max. stall torque 2,858 ft-lbf [3,875 nm] 4 power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 5
60 Power A Neyrfor Traditional Series B Bearing C D Handbook 51
61 6 5 8-in T121 Steerable in T2 MK1 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [15.16m] (B) Bit to center of stabilizer B ft [9.94 m] (C) Bit to center of stabilizer C ft [4.78 m] (D) Bit to bend 5.7 ft [1.74 m] (E) Bit to center of stabilizer E.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 4,833 lbm [2,192 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 79 to 1,3 rpm 2.64 rev/gal Pressure drop range 1,368 to 2,664 psi 1,368 to 2,664 psi Max. power output 359 hp [268 kw] Max. stall torque 3,581 ft-lbf [4,855 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 52
62 Power A B Neyrfor Traditional Series C Bearing D E Handbook 53
63 6 5 8-in T122 Steerable in T2 MK2 FBS Tool Summary Tool Specifications Turbine diameter in [ mm] (A) Overall length ft [15.16m] (B) Bit to center of stabilizer B ft [9.94 m] (C) Bit to center of stabilizer C ft [4.78 m] (D) Bit to bend 5.7 ft [1.74 m] (E) Bit to center of stabilizer E.77 ft [.24 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 4,95 lbm [2,224.9 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [191 mm to 251 mm] Operational Data RPM range/revolution per gallon 6 to 1,9 rpm rev/gal Pressure drop range 1,351 to 2,747 psi 1,351 to 2,747 psi Max. power output 324 hp [242 kw] Max. stall torque 3,845 ft-lbf [5,213 nm] power output, hp ,5 3, 2,5 pressure drop, 2, psi 1,5 1, Build rate capabilities, / Hole angle, 54
64 Power A B Neyrfor Traditional Series C Bearing D E Handbook 55
65 7 1 4-in T111 Steerable in T1 MK1 FBS Tool Summary Tool Specifications Turbine diameter 7.25 in [ mm] (A) Overall length 32.6 ft [9.94 m] (B) Bit to center of stabilizer B 16.9 ft [1.89 m] (C) Bit to bend 6.2 ft [1.89 m] (D) Bit to center of stabilizer D 1. ft [.3 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 3,67 lbm [1,664.7 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [213 mm to 27 mm] Operational Data RPM range/revolution per gallon 765 to 1,43 rpm 1.85 rev/gal Pressure drop range 915 to 2,351 psi 915 to 2,351 psi Max. power output 474 hp [353 kw] Max. stall torque 3,679 ft-lbf [4,988 nm] 5 power output, hp ,5 2,2 1,9 pressure drop, 1,6 psi 1,3 1, Build rate capabilities, / Hole angle, 56
66 Power A B Neyrfor Traditional Series Bearing C D Handbook 57
67 7 1 4-in T121 Steerable in T2 MK1 FBS Tool Summary Tool Specifications Turbine diameter 7.25 in [ mm] (A) Overall length 48.1 ft [9.88 m] (B) Bit to center of stabilizer B 32.4 ft [5.15 m] (C) Bit to center of stabilizer C 16.9 ft [5.15 m] (D) Bit to bend 6.2 ft [1.89 m] (E) Bit to center of stabilizer E 1. ft [.3 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 5,5 lbm [2,494.8 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [213 mm to 27 mm] Operational Data RPM range/revolution per gallon 64 to 1,2 rpm 1.85 rev/gal Pressure drop range 1,65 to 3,35 psi 1,65 to 3,35 psi Max. power output 522 hp [389 kw] Max. stall torque 4,769 ft-lbf [6,466 nm] 6 power output, hp ,5 3, 2,5 pressure drop, 2, psi 1,5 1, Build rate capabilities, / Hole angle, 58
68 Power A B Neyrfor Traditional Series C Bearing D E Handbook 59
69 7 1 4-in T131 Steerable in T3 MK1 FBS Tool Summary Tool Specifications Turbine diameter 7.25 in [ mm] (A) Overall length 63.6 ft [19.39 m] (B) Bit to center of stabilizer B 47.9 ft [14.6 m] (C) Bit to center of stabilizer C 32.4 ft [9.88 m] (D) Bit to center of stabilizer D 16.9 ft [5.15 m] (E) Bit to bend 6.2 ft [1.89 m] (F) Bit to center of stabilizer F 1. ft [.3 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 7,3 lbm [3,311.2 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes in to in [213 mm to 27 mm] Operational Data RPM range/revolution per gallon 565 to 1, rpm 1.85 rev/gal Pressure drop range 1,2 to 3,41 psi 1,2 to 3,41 psi Max. power output 521 hp [382 kw] Max. stall torque 5,672 ft-lbf [7,69 nm] 6 power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 6
70 A B C Power Neyrfor Traditional Series D Bearing E F Handbook 61
71 9 1 2-in T111 Steerable in T1 MK1 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 37.9 ft [11.55 m] (B) Bit to center of stabilizer B 18.4 ft [5.61m] (C) Bit to bend 6.8 ft [2.7 m] (D) Bit to center of stabilizer D 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 7,62 lbm [3,546.4 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 57 to 95 rpm 1.95 rev/gal Pressure drop range 92 to 1,817 psi 92 to 1,817 psi Max. power output 439 hp [327 kw] Max. stall torque 5,54 ft-lbf [6,852 nm] 45 power output, hp , 1,8 1,6 pressure drop, 1,4 psi 1,2 1, Build rate capabilities, / Hole angle, 62
72 Power A B Neyrfor Traditional Series Bearing C D Handbook 63
73 9 1 2-in T112 Steerable in T1 MK2 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 37.9 ft [11.55 m] (B) Bit to center of stabilizer B 18.4 ft [5.61 m] (C) Bit to bend 6.8 ft [2.7 m] (D) Bit to center of stabilizer D 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 7,77 lbm [3,524.4 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 45 to 79 rpm.98 rev/gal Pressure drop range 975 to 2,94 psi 975 to 2,94 psi Max. power output 49 hp [35 kw] Max. stall torque 5,638 ft-lbf [7,644 nm] 45 power output, hp pressure drop, psi 2,2 2, 1,8 1,6 1,4 1,2 1, Build rate capabilities, / Hole angle, 64
74 Power A B Neyrfor Traditional Series Bearing C D Handbook 65
75 9 1 2-in T112HF Steerable in TSH MK2 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 44.4 ft [13.5m] (B) Bit to center of stabilizer B 18.4 ft [5.61 m] (C) Bit to bend 6.8 ft [2.7 m] (D) Bit to center of stabilizer D 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 8,988 lbm [4,76.9 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 425 to 1,156 rpm.98 rev/gal Pressure drop range 1,271 to 4,48 psi 1,271 to 4,48 psi Max. power output 1,279 hp [953 kw] Max. stall torque 13,17 ft-lbf [17,77 nm] power output, hp 1,4 1,2 1, , 1,1 1,2 pressure drop, psi 4,5 4, 3,5 3, 2,5 2, 1,5 1, , 1,1 1,2 Build rate capabilities, / Hole angle, 66
76 Power A Neyrfor Traditional Series B Bearing C D Handbook 67
77 9 1 2-in T113HF Steerable in TSH MK3 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 44.4 ft [13.5 m] (B) Bit to center of stabilizer B 18.4 ft [5.61m] (C) Bit to bend 6.8 ft [2.7 m] (D) Bit to center of stabilizer D 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 9,6 lbm [4,19.5 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 47 to 1,2 rpm rev/gal Pressure drop range 1,2 to 4,59 psi 1,2 to 4,59 psi Max. power output 1,31 hp [769 kw] Max. stall torque 9,25 ft-lbf [1,236 nm] 1,2 power output, hp 1, , pressure drop, psi 5, 4,5 4, 3,5 3, 2,5 2, 1,5 1, , Build rate capabilities, / Hole angle, 68
78 Power A Neyrfor Traditional Series B Bearing C D Handbook 69
79 9 1 2-in T122HF Steerable in T2H MK2 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3mm] (A) Overall length 62.3 ft [18.9 m] (B) Bit to center of stabilizer B 36.3 ft [11.6 m] (C) Bit to stabilizer C 18.4 ft [5.61 m] (D) Bit to bend 6.8 ft [2.7 m] (E) Bit to stabilizer E 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 12,775 lbm [5,794.6 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 34 to 96 rpm.98 rev/gal Pressure drop range 1,27 to 4,925 psi 1,27 to 4,925 psi Max. power output 1,251 hp [933 kw] Max. stall torque 13,688 ft-lbf [18,558 nm] power output, hp 1,4 1,2 1, , pressure drop, psi 5, 4,5 4, 3,5 3, 2,5 2, 1, , Build rate capabilities, / Hole angle, 7
80 Power A B Neyrfor Traditional Series C Bearing D E Handbook 71
81 9 1 2-in T123HF Steerable in T2H MK3 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 62.3 ft [18.9 m] (B) Bit to center of stabilizer B 36.3 ft [11.6 m] (C) Bit to center of stabilizer C 18.4 ft [5.61 m] (D) Bit to bend 6.8 ft [2.7 m] (E) Bit to center of stabilizer E 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 12,991 lbm [5,892.6 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 375 to 963 rpm rev/gal Pressure drop range 1,5 to 5, psi 1,5 to 5, psi Max. power output 1,12 hp [755 kw] Max. stall torque 11,38 ft-lbf [14,966 nm] 1,2 power output, hp 1, pressure drop, psi 5, 4,5 4, 3,5 3, 2,5 2, 1, Build rate capabilities, / Hole angle, 72
82 Power A B Neyrfor Traditional Series C Bearing D E Handbook 73
83 9 1 2-in T121 Steerable in T2 MK1 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 55.8 ft [17.1 m] (B) Bit to center of stabilizer B 36.3 ft [11.6 m] (C) Bit to center of stabilizer C 18.4 ft [5.61 m] (D) Bit to bend 6.8 ft [2.7 m] (E) Bit to center of stabilizer E 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 11,257 lbm [5,16.1 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 51 to 85 rpm 1.95 rev/gal Pressure drop range 1,433 to 2,639 psi 1,433 to 2,639 psi Max. power output 565 hp [421kw] Max. stall torque 8, ft-lbf [1,847 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 74
84 Power A B Neyrfor Traditional Series C Bearing D E Handbook 75
85 9 1 2-in T122 Steerable in T2 MK2 FBS Tool Summary Tool Specifications Turbine diameter 9.5 in [241.3 mm] (A) Overall length 55.8 ft [17.1 m] (B) Bit to center of stabilizer B 36.3 ft [11.6 m] (C) Bit to center of stabilizer C 18.4 ft [5.61 m] (D) Bit to bend 6.8 ft [2.7 m] (E) Bit to center of stabilizer E 1. ft [.3 m] Top connection API Reg box API Reg box Bit connection or API Reg pin or API Reg pin Total tool weight 11,1 lbm [5,35 kg] Bend settings to 1.5 to 1.5 Recommended bit sizes 12 in to in [35 mm to 445 mm] Operational Data RPM range/revolution per gallon 4 to 67 rpm.98 rev/gal Pressure drop range 1,5 to 2,9 psi 1,5 to 2,9 psi Max. power output 465 hp [347 kw] Max. stall torque 7,3 ft-lbf [9,897 nm] power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 76
86 Power A B Neyrfor Traditional Series C Bearing D E Handbook 77
87
88 Neyrfor Delta Series Neyrfor Delta Series Handbook 79
89 4 3 4-in D211 Steerable Delta Series Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 3.2 ft [9.2 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 4.18 ft [1.27 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,537 lbm [697.2 kg] Bend settings 1. to to 2. Recommended bit sizes in to in [143 to 171 mm] Operational Data RPM range/revolution per gallon 1,2 to 2,5 rpm 7.44 rev/gal Pressure drop range 1,15 to 3, psi 1,15 to 3, psi Max power output 212 hp [152 kw] Max stall torque 1,27 ft-lbf [1,722 nm] 25 power output, hp pressure drop, psi 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 8
90 Power A Neyrfor Delta Series B Bearing C D Handbook 81
91 4 3 4-in D211XP Steerable T1XL MK1 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length ft [11.17 m] (B) Bit to center of stabilizer B ft [4.2 m] (C) Bit to bend 4.18 ft [1.27m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,662 lbm [753.9 kg] Bend settings 1. to to 2. Recommended bit sizes in to in [143 to 171 mm] Operational Data RPM range/revolution per gallon 1, to 2, rpm 7.44 rev/gal Pressure drop range 1,5 to 3, psi 1,5 to 3, psi Max power output 25 hp [186 kw] Max stall torque 1,5 ft-lbf [2,34 nm] power output, hp ,5 3, 2,5 pressure drop, 2, psi 1,5 1, Build rate capabilities, / Hole angle, 82
92 Power Section A Neyrfor Delta Series B Bearing Section C D Handbook 83
93 4 3 4-in D212 Steerable T1 MK2 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 3.2 ft [9.2 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 4.18 ft [1.27 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,552 lbm [74. kg] Bend settings 1. to to 2. Recommended bit sizes in to in [143 to 171 mm] Operational Data RPM range/revolution per gallon 86 to 1,6 rpm rev/gal Pressure drop range 1,25 to 3, psi 1,25 to 3, psi Max power output 2 hp [149 kw] Max stall torque 1,45 ft-lbf [1,95 nm] 25 power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 84
94 Power A Neyrfor Delta Series B Bearing C D Handbook 85
95 4 3 4-in D212XP Steerable T1XL MK2 FBS Tool Summary Tool Specifications Turbine diameter 4.75 in [12.65 mm] (A) Overall length 36.3 ft [11.17 m] (B) Bit to center of stabilizer B 13.1 ft [4.2 m] (C) Bit to bend 4.18 ft [1.27 m] (D) Bit to center of stabilizer D.6 ft [.2 m] Top connection IF box IF box Bit connection API Reg pin API Reg pin Total tool weight 1,684 lbm [763.8 kg] Bend settings 1. to to 2. Recommended bit sizes in to in [143 to 171 mm] Operational Data RPM range/revolution per gallon 86 to 1,5 rpm rev/gal Pressure drop range 1,5 to 3, psi 1,5 to 3, psi Max power output 225 hp [168 kw] Max stall torque 1,6 ft-lbf [2,169 nm] power output, hp pressure drop, psi 3,5 3, 2,5 2, 1,5 1, Build rate capabilities, / Hole angle, 86
2 1 /8 in Neyrfor TTT. Thru Tubing Turbodrill
2 1 /8 in Neyrfor TTT Thru Tubing Turbodrill In 1956, the first Neyrfor turbodrill was developed. Today, Neyrfor turbodrilling systems have become more advanced and power-efficient than ever before. Based
More informationSuccessful New Technology Introduction and Applications of Rotary Steerable System.
Successful New Technology Introduction and Applications of Rotary Steerable System. Mohammed Ibrahim Schlumberger Copyright 2003, MPC 2004 This paper was prepared for the 8th MEDITERRANEAN PETROLEUM CONFERENCE
More informationUsing Drilling Dynamics To Reduce Drilling costs
1 Welcome Using Drilling Dynamics To Reduce Drilling costs 2 Using Drilling Dynamics The cost of the drill bit, mud motor, and other BHA components depends the downhole conditions in which they operate.
More informationAbout Cobra Downhole Motors
February 2016 1 About Cobra Downhole Motors Cobra Downhole Motors combines new material technology and innovative product features with a customer driven approach. We add value to our customers drilling
More informationAbout Cobra Downhole Motors
October 2017 1 About Cobra Downhole Motors Cobra Downhole Motors combines new material technology and innovative product features with a customer driven approach. We add value to our customers drilling
More informationAxeBlade. Ridged diamond element bit
AxeBlade Ridged diamond element bit Instantaneous ROP Improvement. Better Steerability. The AxeBlade* ridged diamond element bit positions Axe* elements along the bit face to achieve increased ROP and
More informationHealth, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested:
Wenzel Downhole Tools is the leading motor and drilling tool supplier, with worldwide operations supporting the oilfield and construction industries. Wenzel s capability to engineer, manufacture and service
More informationPowered Rotary Steerable System Technology
Powered Rotary Steerable System Technology B.Antony Fayaz 1,Govindan.S 2 1,2 Department of Petroleum Engineering, AMET University, Chennai -603112 Abstract: As the demand of hydrocarbons are growing high
More informationONYX 360. Rolling PDC cutter
ONYX 360 Rolling PDC cutter ONYX 360 Rolling PDC Cutter Applications Drilling conditions that cause and accelerate PDC cutter wear Abrasive environments Benefits Extends bit durability Increases run footage
More informationCT Plus. Coiled tubing bits for plug milling
CT Plus Coiled tubing bits for plug milling Designed specifically to optimize performance in plug milling including coiled tubing and workover operations, small-diameter CT Plus* coiled tubing bit from
More informationDRILLING MOTOR HANDBOOK
DRILLING MOTOR HANDBOOK GORILLA Drilling Motors TM rev213.6.19 DRILLING MOTOR HANDBOOK www.axonep.com The information contained in this handbook is for reference only. AXON Downhole Products Inc. does
More informationAccelerating the Oilfield, Empowering the Industry
Accelerating the Oilfield, Empowering the Industry Presentation for ROMANIA UPSTREAM CONFERENCE 13 th March 2012 Andy Thompson Tercel Oilfield Products About Tercel Tercel Oilfield Products is a designer
More informationLatest Advancements in DrillString Mechanics
Services, Trainings, Softwares Latest Advancements in DrillString Mechanics SPE Gulf Coast Section 03/09/2016 Stephane Menand, Ph.D. stephane.menand@drillscan.com 1 DrillScan Intro Directional Drilling
More informationGyrodata Incorporated
Gyrodata is an independent supplier and service provider delivering precision wellbore placement and evaluation solutions for drilling, completions and production challenges. Since 1980, we have been partnering
More information44. Bit record form Rig site daily drilling report form Office drilling report Computerized drilling information network
Figures v Tables vii Foreword ix Acknowledgments xi Units of Measurement xii Introduction 1 Well Planning 5 Bits 9 Bit Selection 9 Bit Design 11 How Bits Drill 12 Roller Cone Bits 13 Natural Diamond Bits
More informationGyrodata Incorporated
Gyrodata is an independent supplier and service provider delivering precision wellbore placement and evaluation solutions for drilling, completions and production challenges. Since 1980, we have been partnering
More informationThru-Tubing. Motors and standard tools
Thru-Tubing Motors and standard tools Thru-Tubing Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research Innovate
More informationPOWR Series. Performance and Steerable Drilling Motors
POWR Series Performance and Steerable Drilling Motors Drilling Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research
More informationPDC Drill Bits. Drilling Equipment Made in Germany
PDC Drill Bits Drilling Equipment Made in Germany www.micon-drilling.de Phone +49. 51 44. 49 36 0 MICON-Drilling GmbH Im Nordfeld 14, 29336 Nienhagen, Germany www.micon-drilling.de Copyright 2016 MICON-Drilling.
More informationRENTAL TOOL SERVICES. Megaton Impact Tools
Megaton Impact Tools Megaton Impact Tools optimize your drilling operations. Megaton Impact Tools Ulti-Torq high-torque, double shoulder connections Involute spline design High-strength steel developed
More informationMotor Handbook. 4th Edition Ver. 1.0a ALL RIGHTS RESERVED. Issue Date; December 23, 2013 Wenzel Downhole Tools
MOTOR HANDBOOK Motor Handbook 4th Edition Ver. 1.0a Issue Date; December 23, 2013 Wenzel Downhole Tools ALL RIGHTS RESERVED The information contained in this manual is provided for informational and illustration
More informationRENTAL TOOL SERVICES. Megaton Impact Tools
Megaton Impact Tools Upper Connector Megaton Impact Tools optimize your drilling operations. Drive Mandrel Female Spline Bearing Female Spline New-Generation Drilling Tools Megaton Drilling Jar Frees the
More informationOur thru-tubing motors deliver performance right where you need it. Downhole.
Our thru-tubing motors deliver performance right where you need it. Downhole. Delivering Downhole Performance 1 11/16 5-6 2.3 Stg EVEN WALL MOTOR SPECIFICATIONS 1 11/16 5-6 2.3 Stg EVEN WALL MOTOR SPECIFICATIONS
More informationQuickCut Casing Exit System RMN-Type or RHN-Type Anchor*
QuickCut Exit System * The latest generation of Weatherford s high-performance QuickCut casing exit system is now anchored by the innovative high-expansion MultiCatch whipstock anchor to provide a high-performance,
More informationSERVICE and PRODUCT CATALOGUE
SERVICE and PRODUCT CATALOGUE We ll stay as long as you need us! Rangeview has a large list of motors and thru-tubing tools available. Our motors are the premium power to produce well made products that
More informationA HYBRID SOLUTION. Combining the best characteristics of both PDC and rollercone bits, Tim Beaton, Shear Bits, USA, champions a new type of drill bit.
A HYBRID SOLUTION Combining the best characteristics of both PDC and rollercone bits, Tim Beaton, Shear Bits, USA, champions a new type of drill bit. A new type of patent pending drill bit created for
More informationTechnical Description and Specifications of the VibraEnforcer Systems for Freeing Stuck Pipe in Drilling Operations
Introduction Technical Description and Specifications of the VibraEnforcer Systems for Freeing Stuck Pipe in Drilling Operations Nordic Well Services and Advanced Drilling Support Services (ADSS) has identified
More informationRotary Steerable Drilling Systems Enable Single Trip runs for Larger Hole Craig Sidwell, Greg Conran, Rob Utter Schlumberger Drilling & Measurements
AADE-03-NTCE-49 Rotary Steerable Drilling Systems Enable Single Trip runs for Larger Hole Craig Sidwell, Greg Conran, Rob Utter Schlumberger Drilling & Measurements Copyright 2003 AADE Technical Conference
More informationNEW TECHNOLOGIES INCREASE DRILLING PERFORMANCE IN OMV PETROM. March 20, Bucharest
NEW TECHNOLOGIES INCREASE DRILLING PERFORMANCE IN OMV PETROM March 20, Bucharest Route to Drilling performance? Engineering could be the key! Engineering identify real drilling problems ( check deeper
More informationLand Drilling Packages Integrated, standardized solutions for efficient operations
Land Drilling Packages Integrated, standardized solutions for efficient operations Maximize Drilling Efficiency with a Comprehensive Solution Maximum uptime means lower total cost of ownership and greater
More informationProOne Downhole Drilling Fluid
ProOne Downhole Drilling Fluid Friction Reducing Lubricants.. Saving Downtime & Equipment ProOne Downhole Drilling Slurry: Technology Summary: Traditional lubricants are limited in their ability to provide
More informationCAT HYDRAULIC HOSE SOLUTIONS THE PREFERRED CONNECTION
CAT HYDRAULIC HOSE SOLUTIONS THE PREFERRED CONNECTION When it comes to hydraulics, you want the safest and most reliable components on your machine. THAT S WHY CATERPILLAR OFFERS SUPERIOR HOSE SOLUTIONS
More informationSKF Mudblock cassette seals. A new generation of radial shaft sealing units for off-highway, oil-lubricated applications
SKF Mudblock cassette seals A new generation of radial shaft sealing units for off-highway, oil-lubricated applications SKF Mudblock seals provide excellent oil retention to minimize environmental impact.
More informationLESSON Transmission of Power Introduction
LESSON 3 3.0 Transmission of Power 3.0.1 Introduction Earlier in our previous course units in Agricultural and Biosystems Engineering, we introduced ourselves to the concept of support and process systems
More informationTable of Contents. 1.0 Product Description. 2.0 Purchaser s Rights. 3.0 Purchaser s Responsibility. Purchasing Guidelines Handbook
Table of Contents 1.0 Product Description 1.1 Beam Pumping Units 1.2 Product Components 2.0 Purchaser s Rights 2.1 Inspection 3.0 Purchaser s Responsibility 3.1 Operational Conditions 3.2 Data Sheets &
More informationDRILL PIPE CARE AND HANDLING Complete Group AVENUE Leduc AB T9E 0W1 +1 (780) CG.ENG.
DRILL PIPE CARE DRILL PIPE INTRODUCTION Box End Hardbanding Tapered Shoulder Tong Area Weld DEFINITION The drillpipe connects the rig surface equipment with the bottomhole assembly and the bit, both to
More informationDIST. AUTORIZADO MEX (55) QRO (442) MTY (81)
DIST. AUTORIZADO About WPT Since 992! As an international manufacturer of pneumatic and hydraulic power take-off s, clutches and brakes for a broad range of industrial and petroleum applications, WPT Power
More informationAtlas Copco Oil and Gas Rigs. The Predator Advantage
Atlas Copco Oil and Gas Rigs The Predator Advantage Atlas Copco Drilling Solutions Leading supplier globally of rotary drilling equipment Three manufacturing locations Garland, Texas, USA Nasik, India
More informationSKF Super-precision Bearing Lubrication Unit. Improved reliability, profitability and reduced environmental impact
SKF Super-precision Bearing Lubrication Unit Improved reliability, profitability and reduced environmental impact Benefit your business and the environ To meet the ever-growing performance requirements
More informationSPE Improved Hydraulic Fracturing Perforation Efficiency Observed With Constant Entry Hole and Constant Penetration Perforation
SPE-184878 Improved Hydraulic Fracturing Perforation Efficiency Observed With Constant Entry Hole and Constant Penetration Perforation D. Cuthill, W. Yang, & J. Hardesty, GEODynamics, Inc. OUTLINE Slide
More informationDRILLING MOTOR HANDBOOK
DRILLING MOTOR HANDBOOK April 218 About Tartan About Tartan Tartan Energy Group (Tartan) is a multifaceted energy services company that engineers and manufactures innovative, customized multistage stimulation
More informationST1000 Series Air Starters
ST1 Series Air Starters ST1 Series Air Starters Ingersoll Rand Industrial Technologies provides products, services and solutions that enhance our customers energy efficiency, productivity and operations.
More informationMANUFACTURING. PD Impact Tools
PD Impact Tools Upper Connector MANUFACTURING Drive Mandrel Female Spline Bearing Female Spline PD Impact Tools optimize your drilling operations. Knocker Housing Knocker Pressure Piston Hydraulic Mandrel
More informationOilfield Bits. Drilling Equipment Made in Germany
1 Oilfield Bits Drilling Equipment Made in Germany www.micon-drilling.de Phone +49. 51 44. 49 36 0 MICON-Drilling GmbH Im Nordfeld 14, 29336 Nienhagen, Germany www.micon-drilling.de Copyright 2016 MICON-Drilling.
More informationDrilling Jars Coiled Tubing Jars Impactors & Drivers When You Need It
1 Drilling Jars Coiled Tubing Jars Impactors & Drivers When You Need It Higher Impact Easier Control Unique Design 2 ABOUT G-FORCE G-Force J28GF G-FORCE JARS, LLC was founded by staff that has over 50
More informationTURBODRILLS. Integra Group of Companies
TURBODRILLS Integra Group of Companies 2014 2 AGENDA 1. Integra Group company structure, Products &Services 2. VNIIBT-Drilling Tools company history, structure, manufacturing centers & products 3. Patents
More informationHighlights of Achievements at Loc. TU
Highlights of Achievements at Loc. TU Planned-80 days / Actual-74 days. Different BHAs for drilling in rotary mode designed by in-house expertise. Sliding was limited to
More informationMotor. Operations. Handbook
Motor Operations Handbook 2010 Version 4.0 MISSION STATEMENT Cougar Tool will be the premier supplier of down-hole drilling equipement that sets the standards by which all others are judged. 2010 Version
More informationCasing Scraper. Service Equipment. Features
Casing Scraper The Casing Scraper is a spring type, mechanical casing scraper, featuring a large by-pass area between the blades to allow circulation of debris. The body is constructed of the highest quality
More informationVibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation
Vibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation 2/5/2013 Roger L. Schultz TTS Drilling Solutions Presentation Overview Frictional Forces, Vibratory
More informationSet, seal, and retrieve with confidence. Packers Catalog
Set, seal, and retrieve with confidence Packers Catalog 1 2 Table of Contents Conventional Packers...05 ESP/Dual Completion Packers...35 High-Rate-Gas Packers...43 HPHT Packers...47 Intelligent Completion
More informationCasing Cementation Equipment
Casing Cementation Equipment Float Equipment Cementing Plugs Casing Centralizers Stage Tools Inflatable Casing Packers Extended Reach Casing Equipment Swellable Casing Packers Liner Equipment Quality Control/Assurance
More information- you succeed! We do Welcome to. Holland OilTech Services BV.
DRILL BITS WELL HEAD EQUIPMENT CASING / TUBING CASING HARDWARE LINER HANGER EQUIPMENT COMPLETION EQUIPMENT NOWAX SERVICES DRILL BITS WELL HEAD EQUIPMENT CASING / TUBING CASING HARDWARE LINER HANGER EQUIPMENT
More information2012 Product Catalog
2012 Product Catalog Headquarters 1310 Rankin Rd. Houston, TX 77073-4802 www.slb.com Copyright 2011 Schlumberger. All rights reserved. No part of this book may be reproduced, stored in a retrieval system,
More informationWireline coring rods Technical Overview
Wireline coring rods Technical Overview Copyright 2013 Boart Longyear. All Rights Reserved. Copyright 2013 Boart Longyear. All rights reserved. U.S. Patent No. 5,788,401; AU Patent No. 722,567; CA Patent
More informationHIGH-FLOW/SIDE-LOAD TRANSMITTER HOUSINGS
HIGH-FLOW/SIDE-LOAD TRANSMITTER HOUSINGS A Bullet-Proof Design for Hard Condition Drilling PROPRIETARY ARMA-LOC LID SECURITY SYSTEM The most secure lid retaining system on the market, this patented system
More informationProduct Portfolio. Behind every bit is a company that knows every bit about it. When Every Run Counts TM. An ESCO Oil & Gas Company
An ESCO Oil & Gas Company Product Portfolio Behind every bit is a company that knows every bit about it. When Every Run Counts TM Ulterra designs and manufactures high- ULTERRA Advantages Fast and effective
More informationSPE Distinguished Lecturer Program
SPE Distinguished Lecturer Program The SPE Distinguished Lecturer Program is funded principally through a grant from the SPE Foundation. The society gratefully acknowledges the companies that support this
More informationCasing Drilling- Recent Advances for Drilling Challenges. Allen Sinor Hughes Christensen- A Baker Hughes Company The Woodlands, Texas
Casing Drilling- Recent Advances for Drilling Challenges Allen Sinor Hughes Christensen- A Baker Hughes Company The Woodlands, Texas SPE Gulf Coast Section January 10, 2001 Casing Drilling History Casing
More informationMitigating Bit-Related Stick-Slip With A Torsional Impact Hammer
AADE-11-NTCE-10 Mitigating Bit-Related Stick-Slip With A Torsional Impact Hammer Ryan Wedel, Shaun Mathison, and Greg Hightower, Ulterra Drilling Technologies, Craig Staley, Chesapeake Energy Copyright
More informationAtlas Copco Blasthole Drills DM-M3
Atlas Copco Blasthole Drills DM-M3 It all starts with the blasthole... and the blasthole starts with the DM-M3 power and performance. A unique patented feed system: Longer head travel with smaller cylinder
More informationAshmin HammR Drill Motor
Ashmin HammR Drill Motor By: Dr. Gunther (Doc) Tuesday, September 12 th, 2017 Research. Innovate. Test. Deploy. Agenda Drilling Challenges Alternative Designs Drilling Hammer Trends Ashmin HammR Drill
More informationDrill Collars. Drill collars from VAM Drilling are available with the following features:
73 Drill Collars Drill collars are thick-walled tubular pieces machined from solid steel bars, forming a component of the bottom hole assembly that provides weight-onbit for improved drilling performance.
More informationMethods and Tools of Killing an Uncontrolled Oil-Gas Fountain Appearing After an Explosion of an Offshore Oil Platform "
Methods and Tools of Killing an Uncontrolled Oil-Gas Fountain Appearing After an Explosion of an Offshore Oil Platform " Authors: Dr. S. Tseytlin, D. Tseytlin Relevance of the topic and scope of the invention
More informationHigh performance S1S hydraulic seals. Providing a longer and more reliable life-cycle for hydraulic cylinders
High performance S1S hydraulic seals Providing a longer and more reliable life-cycle for hydraulic cylinders A leader in sealing technology Reduced leakage and friction, together with a long and reliable
More informationMinimizing risk with innovative design. Dual ESP Systems and Accessories
Minimizing risk with innovative design Dual ESP Systems and Accessories Dual ESP Systems When you need to improve the performance of your high-asset-value wells, Schlumberger dual ESP systems provide the
More informationApplication Note Original Instructions Development of Gas Fuel Control Systems for Dry Low NOx (DLN) Aero-Derivative Gas Turbines
Application Note 83404 Original Instructions Development of Gas Fuel Control Systems for Dry Low NOx (DLN) Aero-Derivative Gas Turbines Woodward reserves the right to update any portion of this publication
More informationULTIMA U75 U HP OIL-FREE TWO-STAGE VARIABLE SPEED ROTARY SCREW COMPRESSOR. Ultima
ULTIMA U75 U160 100 200 HP OIL-FREE TWO-STAGE VARIABLE SPEED ROTARY SCREW COMPRESSOR Ultima GARDNER DENVER ULTIMA What makes the ULTIMATE oil-free compressor? Is it highest efficiency? Is it lowest noise
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationSPE MS. Abstract
SPE-179088-MS Optimizing Bridge Plug Milling Efficiency Utilizing Weight-On-Bit to Control Debris Size: A Comparative Study of the Debris Size vs Weight-On-Bit Utilizing Five Bladed Carbide Mill, Tri-Cone
More informationSmart Top Drive Automation Improves Drilling Performance and Prevents Downhole Tool Failures
Smart Top Drive Automation Improves Drilling Performance and Prevents Downhole Tool Failures IADC Southern Arabian Peninsula Chapter February 15 th, 2018 Top Drive Automation Overcoming Inefficiencies
More informationTOP HAMMER DRILLING TOOLS. Percussive Products
TOP HAMMER DRILLING TOOLS Percussive Products 2 TABLE OF CONTENTS HARD ROCK TOOLING OVERVIEW 5 Bit Types 6 Bit Face Designs 8 Button Types 9 Blade Bit Designs 10 Reaming Tooling Designs 11 Rod Types 12
More informationCylindrical roller bearings for large electric motors
Cylindrical roller bearings for large electric motors Cylindrical roller bearings are typically used in belt or gear driven medium- to largesized electric motors, where heavy radial loads prevail. These
More informationAADE 01-NC-HO-54. Abstract
AADE 01-NC-HO-54 High Performance/High Temperature Water Based Fluid Drills Wilcox Test Rene St. Pierre, Belco Energy Corp Dennis Welch, Newpark Drilling Fluids, LLC Copyright 2001 AADE National Drilling
More informationPRECISION BELLOWS COUPLINGS
PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering
More informationThe WPT. Advantage. Airtube Advantage. O-Ring Advantage. Preferred Airtube StyleVS. Piston Style
The WPT Advantage The WPT advantage is built into every one of our Water Cooled Brakes (WCB). Airtube Advantage Standard with all WCB units, the reinforced neoprene airtube reacts accurately to small pressure
More informationSKF Explorer spherical roller bearings Optimized for superior field performance
SKF Explorer spherical roller bearings Optimized for superior field performance Continuous improvement to optimize The timeline below illustrates SKF milestones in the development of self-aligning bearings.
More informationSKF Explorer cylindrical roller bearings. Extended range for large, heavy industrial applications
SKF Explorer cylindrical roller bearings Extended range for large, heavy industrial applications 2 A higher level of performance for large, heavy-duty applications The SKF Explorer performance class now
More informationCoiled-Tubing High Pressure Jet Drilling System
A Noble Drilling Corporation Subsidiary Coiled-Tubing High Pressure Jet Drilling System April 19, 2001 Dr. William C. Maurer TT00-38 1 Exxon High Pressure Drill Rig HP Pump HP Rotary Hose HP Swivel HP
More informationNSK Linear Guides. Roller Guide RA Series. Extended series
NSK Linear Guides A roller guide series employing advanced analysis technology offers super-high load capacity and rigidity. The RA series includes a complete lineup to handle a wide range of applications.
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationAADE 2009NTCE DYNAMIC BHA ANALYSIS PROGRAM AND OPERATION ROAD MAP OPTIMIZES HOLE ENLARGEMENT WHILE DRILLNG PERFORMANCE, MARS BASIN - GoM
2009 NATIONAL TECHNICAL CONFERENCE & EXHIBITION, NEW ORLEANS, LOUISIANA AADE 2009NTCE-04-01 DYNAMIC BHA ANALYSIS PROGRAM AND OPERATION ROAD MAP OPTIMIZES HOLE ENLARGEMENT WHILE DRILLNG PERFORMANCE, MARS
More informationPipe Recovery Equipment
Pipe Recovery Equipment Jet Research Center offers a variety of field-proven, reliable pipe recovery equipment to satisfy the high demands in the oilfield industry. The equipment supplied by JRC undergoes
More informationMotor Homes. Power Protection Fuel Economy ACCESSORY PRODUCTS SYNTHETIC MOTOR OILS
Motor Homes SYNTHETIC MOTOR OILS ACCESSORY PRODUCTS Power Protection Fuel Economy When you put the best into your motor home, you can expect the best from it. AMSOIL-engineered lubricants help protect
More informationRD20II RD20III Worldwide Dealer Network Worldwide Product Support Worldwide Availability Atlas Copco Drilling Solutions Inc.
Atlas Copco RD20 The RD20 Advantage equals power, performance, and mobility Powerful Feed System The patented carriage feed system is the heart of the RD20. It delivers a full 110,000 lb. (49,896 kg) of
More informationA prolific inventor, John Bean interrupted his California retirement in 1884 to develop a continuous spray pump to combat orchard scale.
Reciprocating Pumps A prolific inventor, John Bean interrupted his California retirement in 1884 to develop a continuous spray pump to combat orchard scale. The rest is FMC history. 3 FMC Technologies
More informationTWO CYCLE ADVANTAGE ENDURING DESIGN. LEGENDARY HERITAGE.
TWO CYCLE ADVANTAGE ENDURING DESIGN. LEGENDARY HERITAGE. The E 23 engine available in 8, 12, 16 and 20 cylinder configurations with continuous power ratings from 2000 to 5000 hp E 23 Engine Ratings and
More informationGuide. Services Document No: GD-1401 v1.0. Issue Date: Title: WIND ISLANDING. Previous Date: N/A. Author: Heather Andrew.
Guide Department: Interconnection Services Document No: GD-1401 v1.0 Title: WIND ISLANDING Issue Date: 11-24-2014 Previous Date: N/A Contents 1 PURPOSE... 2 2 SCOPE AND APPLICABILITY... 2 3 ROLES AND RESPONSIBILITIES...
More informationCoiled Tubing Tool EXTERNAL SLIP CONNECTOR. Feature. Specification Tool O.D. inch. Coiled Tubing O.D. inch. Tool I.D. inch. Conn.
Coiled Tubing Tool EXTERNAL SLIP CONNECTOR The External Slip Connector is designed through a unique non-rotational slip, the upper end is connected with the coiled tubing, and the lower end is connected
More informationSURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE J1095 Issued 1982-06 Revised 2003-03 REV. MAR2003 Superseding J1095 MAR1995 Spoke Wheels and Hub Fatigue Test Procedures 1. Scope This SAE Recommended Practice provides
More informationYASKAWA AC Drives. Compressor Applications Application Overview
YASKAWA AC Drives Compressor Applications Application Overview This document provides a general application overview and is intended to familiarize the reader with the benefits of using AC drives in compressor
More informationResearch Results Digest 72
December 2005 TRANSIT COOPERATIVE RESEARCH PROGRAM Sponsored by the Federal Transit Administration Responsible Senior Program Officer: Christopher W. Jenks Subject Areas: VI Public Transit, VII Rail Research
More informationIMPROVING SULFURIC ACID PLANT PERFORMANCE THROUGH NEW SHAPE & HIGHER ACTIVITY CATALYSTS
IMPROVING SULFURIC ACID PLANT PERFORMANCE THROUGH NEW SHAPE & HIGHER ACTIVITY CATALYSTS BY: TIMOTHY R. FELTHOUSE, Ph.D; MARIO P. DIGIOVANNI, P.E.; JOHN R. HORNE AND SARAH A. RICHARDSON PRESENTED AT: THE
More informationSandvik DT series All-around performance
Sandvik DT series All-around performance Focus on absolute excellence RESPONDING TO YOUR TUNNELING CHALLENGES A tunneling project is a race against time and costs. You have to get the project right and
More informationPIP REEE003 Guidelines for General Purpose Non-Lubricated Flexible Couplings
September 2016 Machinery PIP REEE003 Guidelines for General Purpose Non-Lubricated Flexible Couplings PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
More informationBall splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs
Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs Place a recirculating-ball bushing on a shaft and what do you get? Frictionless movement of
More informationSKF Explorer angular contact ball bearings. Designed to run faster, cooler, smoother, longer
SKF Explorer angular contact ball bearings Designed to run faster, cooler, smoother, longer Improve performance and increase service life Screw compressors, pumps and gearboxes require bearing arrangements
More informationBest Practices for Downhole Motor Operations in Coiled Tubing Applications
Best Practices for Downhole Motor Operations in Coiled Tubing Applications INTRODUCTION The application of downhole motors with coiled tubing operations has become routine in today s expanded scope of
More informationAtlas Copco. Oil-injected rotary screw compressors G ( kw / hp)
Atlas Copco Oil-injected rotary screw compressors (110-250 kw / 150-340 hp) Reliable technology in a robust design Atlas Copco has a long, successful history of designing and building rugged and reliable
More informationAbstract Tuscaloosa History Introduction
AADE-05-NTCE-08 Record Drilling Performance in HPHT Field R. Seale, Sii Neyrfor, J. Walker, Sii Neyrfor, J. Sanders, BP America, D. Shuler, Smith Bits, T. Beaton, Sii Neyrfor This paper was prepared for
More information