Boring. Reaming. Burnishing. Threading. Revolution Drill DRILLING. Indexable Insert Drilling System. Specials
|
|
- Martha Bradley
- 6 years ago
- Views:
Transcription
1 oring Reaming urnishing Threading Revolution rill Indexable Insert rilling System Specials
2 The Foundation Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions to the world. What was once a small job shop in Ohio is now a worldwide leader in cutting tool technology. With three manufacturing facilities in Ohio, one in Georgia, another in Germany, and headquarters in both the United States and urope, llied Machine is positioned to bring innovative solutions and technical expertise directly to the customers hands. The eginning Harold. Stokey founded llied Machine & ngineering to aid the war effort, manufacturing taper bearing lock nuts for the production of M1 tanks. Years later, after a sales meeting gone wrong, Stokey possessed a warehouse stocked with spade drill inserts. He set forth into the industry that would become llied Machine s thriving identity: holemaking. The T- When Harold s son, William H. Stokey, became the president and O, he developed the Throw way-or T--spade drill insert system. The T- revolutionized the holemaking industry, launching llied Machine ahead of the competition. Since then, numerous innovations and advancements have been created from the T- s inspiration.
3 The Innovation Since the development of the T-, llied Machine has expanded its product offering to support a vast range of customer applications, including large diameter and deep hole drilling, boring, reaming, burnishing, porting, and threading. The Future llied Machine is constantly investing in the brightest and sharpest minds, shaping a future filled with success and quality for customers around the world. Steve Stokey xecutive Vice President William H. Stokey President and O Mike Stokey xecutive Vice President ThreadMills US
4 General Production High Penetration GN3SYS T Pro (certain sizes are ideal for deep hole drilling and/or large diameter drilling) GN3SYS T S 320 Large iameter Revolution rill GN2 T- Original T- High Performance eep Hole Large iameter / eep Hole Opening rill Porting ccuport 432 P rill Universal T- rill Guided T- rill (special) Structural Steel GN3SYS T T- ringing you the finest in precision cutting tools
5 LVN Reaming Systems S...M.I. Roller urnishing ThreadMills US ccuthread 856 Pin Style Indexable ccuthread 856 olt-in Style Indexable ccuthread 856 Solid arbide ThreadMills US Solid arbide Insta-Quote Online custom tool builder and quote generator i-form ustom indexable drill / form tool system ngineered Specials If your special holemaking needs cannot be met with the Insta-Quote system, llied Machine can specially engineer NY product to make your application a success. Simply contact your local Field Sales ngineer or the llied Machine pplication ngineering department for assistance with creating your special tooling. Let llied Machine resolve your challenges today. llied Machine & ngineering patent information can be found at
6 Revolution rill Large iameter Replaceable I Insert rilling System iameter Range: 1.875" " (47.6mm mm) Your safety and the safety of others is very important. This catalog contains important safety messages. lways read and follow all safety precautions. Large Scale Innovation The Revolution rill has an innovative design that allows for adjustability of (5.1mm) on diameter. This eliminates the need for special tooling and/or subsequent boring operations. With the ability to drill from solid, the Revolution rill does not require a previously drilled pilot hole. The replaceable cartridges reduce set-up time, and the indexable inserts protect your investment. The insert design provides excellent chip control and aggressive penetration rates. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WRNING rills from solid rill depths up to 4.5x xcellent chip control NOTI means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. pplicable Industries erospace griculture WRNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOT and IMPORTNT are also used. These are important that you read and follow but are not safety-related. utomotive Firearms General Machining Oil & Gas Renewable nergy Visit for the most up-to-date information and procedures.
7 Reference Icons The following icons will appear throughout the catalog to help you navigate between products. Series Setup / ssembly Information etailed instructions and information regarding the corresponding part(s) Recommended utting ata Speed and feed recommendations for optimum and safe drilling Imperial (inch) iameter Range Metric (mm) Revolution rill ontents Introduction Information Product Overview Set-up Instructions Product Nomenclature rill Series 34 Series Series Series Series Series Series Series Series Series Series Series Recommended utting ata Imperial (inch) Metric (mm) : 1
8 Revolution rill Large iameter Replaceable I Insert rilling System Product Overview Series iameter Range Shank Options Imperial (in) Metric (mm) Length to iameter Ratio Straight T40 T50 Inserts per artridge , 3.5, , 3.5, , 3.5, , 3.5, , , , , , , , NOT: Stacked plate styles are also available Page Features & enefits djustability of (5.1mm) on diameter rill depths up to 4.5x (standard) The replaceable cartridges protect your investment djustable diameter reduces inventory and cost The insert design allows for excellent chip control and aggressive penetration rates No pilot hole needed 2 Inserts (34-42 series) 3 Inserts (44-54 series) 4 Inserts (56-58 series) Shank Options ody Lengths 1.0x (48, 52, 54, 56, 58 series) 2.2x (34, 36, 38, 42, 44, 46 series) 2.5x (48, 52, 54, 56, 58 series) 3.5x (34, 36, 38, 42, 44, 46 series) 4.5x (34, 36, 38, 42, 44, 46 series Straight Shank (all series) T40 Shank (34, 36, 38, 42 series) T50 Shank (all series) 60:
9 Revolution rill Large iameter Replaceable I Insert rilling System Product Overview enter Outboard artridge (adjustable - sets diameter) Loosen mounting screw on adjustable cartridge Inboard artridge (fixed - covers the center) Straight Shanks esigned for lathe applications an be cut off for use in end-mill holders The score mark (circled above) is provided for recommended cut length ut and deburr at the score mark This improves rigidity when the body sits against the face of an end-mill holder : 3
10 Revolution rill Large iameter Replaceable I Insert rilling System Set-up Instructions Step 1: Mount the fixed cartridge and tighten the mounting screw to ft-lbf (15-19 N-m). Step 2: Finger-tighten the mounting screw on the adjustable cartridge. Step 3: Set the diameter using the adjustment screw against the mounting screw. Place the drill in a pre-setter to ensure the correct diameter setting. Step 4: Tighten the mounting screw to ft-lbf (15-19 N-m). I Inserts The design allows for excellent chip control and aggressive penetration rates The proprietary M200 and M300 coatings increase tool life above competitors premium coatings The same inserts are used for both Revolution rill and Opening rill products Insert pplication Recommendations arbide Grade Options M300 M200 TiN 5 (P35) 1 (K35) 2 (K25) General purpose carbide grade suitable for most applications. ommon application in steels and stainless steels. Toughest carbide grade. Provides the best combination of edge strength and tool life. Recommended for less rigid applications. Higher wear resistant carbide suitable for abrasive material applications. Recommended for grey, ductile, and nodular irons. dditional Geometry Option High Rake (HR) Provides superior chip control and tool life in long chipping carbon and alloy steels below 200 hn. 60:
11 Revolution rill Large iameter Replaceable I Insert rilling System Product Nomenclature Revolution rill s R L rill Style 2. Series R = Standard 34 = 34 series 44 = 44 series 54 = 54 series SP = Stacked Plate 36 = 36 series 46 = 46 series 56 = 56 series 38 = 38 series 48 = 48 series 58 = 58 series 42 = 42 series 52 = 52 series 3. Length to iameter Ratio 4. Shank Information 10 = 1.0x50L = 1-1/2 Ø straight 22 = 2.2x 200L = 2.0 Ø straight 25 = 2.5x 40M = 40mm ISO = 3.5x 50M = 50mm ISO = 4.5x V40 = T40 V50 = T50 Revolution rill Inserts OP - 05 T H HR ompatible with: 2. I Type 3. Thickness 4. Radius 5. arbide Grade Opening rill 05 = 5/16 T3 = 5/32 08 = 1/32 lank = 5 (P35) Revolution rill 1 = 1 (K35) 2 = 2 (K25) 6. oating 7. Geometry P = M300 lank = General Purpose H = M200 HR = High Rake T = TiN = TilN N = TiN U = Uncoated Reference Key Symbol 2 L 1 ttribute rill diameter range Shank diameter Overall length Maximum drill depth 2 L 7 L 1 L 7 P 1 length Shank length Rear pipe tap P : 5
12 34 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 34 Series iameter Range: (47.6mm mm) L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 2.2x / / /32 1-1/2 4 1/4 R L Standard 3.5x / / /32 1-1/2 4 1/4 R L Standard 4.5x / / /32 1-1/2 4 1/4 R L Stacked Plate 2.2x /64 5-5/16 9-5/16 1-1/2 4 1/4 SP L 34SP-... Standard 2.2x R M Standard 3.5x R M Standard 4.5x R M Stacked Plate 2.2x SP M 34SP-... * includes cartridges; however, inserts are sold separately. Shank V40 Shank Style Length Range Shank * Standard 2.2x / /32 T40 R3422-V Standard 3.5x /32 9-9/32 T40 R3435-V Standard 4.5x / /32 T40 R3445-V Stacked Plate 2.2x / /16 T40 SP3422-V40 34SP-... * includes cartridges; however, inserts are sold separately. Key on 60: 1 60: : 2-4 = Imperial (in) = Metric (mm) 60:
13 Revolution rill s 34 Series iameter Range: (47.6mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 34 V50 Shank Style Length Range Shank * Standard 2.2x / /32 T50 R3422-V Standard 3.5x /32 9-9/32 T50 R3435-V Standard 4.5x / /32 T50 R3445-V Stacked Plate 2.2x / /16 T50 SP3422-V50 34SP-... * includes cartridges; however, inserts are sold separately. I Inserts R34... SP34... Replacement Qty. Inserts Needed Mounting Key Size djusting river 34-FI 2 MS-17M-1 5mm S-16T9-1 8T-9 34-J 2 MS-17M-1 5mm S-16T9-1 8T-9 34SP-FI 2 MS-17M-1 5mm S-16T9-1 8T-9 34SP-J 2 MS-17M-1 5mm S-16T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 7
14 36 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 36 Series iameter Range: (50.8mm mm) L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 2.2x / / /64 1-1/2 4 1/4 R L Standard 3.5x / / /64 1-1/2 4 1/4 R L Standard 4.5x / / /64 1-1/2 4 1/4 R L Stacked Plate 2.2x / / /16 1-1/2 4 1/4 SP L 36SP-... Standard 2.2x R M Standard 3.5x R M Standard 4.5x R M Stacked Plate 2.2x SP M 36SP-... * includes cartridges; however, inserts are sold separately. Shank V40 Shank Style Length Range Shank * Standard 2.2x / /64 T40 R3622-V Standard 3.5x / /64 T40 R3635-V Standard 4.5x / /64 T40 R3645-V Stacked Plate 2.2x / /64 T40 SP3622-V40 36SP-... * includes cartridges; however, inserts are sold separately. Key on 60: 1 60: : 2-4 = Imperial (in) = Metric (mm) 60:
15 Revolution rill s 36 Series iameter Range: (50.8mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 36 V50 Shank Style Length Range Shank * Standard 2.2x / /64 T50 R3622-V Standard 3.5x / /64 T50 R3635-V Standard 4.5x / /64 T50 R3645-V Stacked Plate 2.2x / /64 T50 SP3622-V50 36SP-... * includes cartridges; however, inserts are sold separately. I Inserts R36... SP36... Replacement Qty. Inserts Needed Mounting Key Size djusting river 36-FI 2 MS-17M-1 5mm S-18T9-1 8T-9 36-J 2 MS-17M-1 5mm S-18T9-1 8T-9 36SP-FI 2 MS-17M-1 5mm S-18T9-1 8T-9 36SP-J 2 MS-17M-1 5mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 9
16 38 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 38 Series iameter Range: (55.9mm mm) L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 2.2x / / /64 1-1/2 4 1/4 R L Standard 3.5x / / /64 1-1/2 4 1/4 R L Standard 4.5x / / /64 1-1/2 4 1/4 R L Stacked Plate 2.2x /8 6-19/ /64 1-1/2 4 1/4 SP L 38SP-... Standard 2.2x R M Standard 3.5x R M Standard 4.5x R M Stacked Plate 2.2x SP M 38SP-... * includes cartridges; however, inserts are sold separately. Shank V40 Shank Style Length Range Shank * Standard 2.2x / /64 T40 R3822-V Standard 3.5x / /64 T40 R3835-V Standard 4.5x / /64 T40 R3845-V Stacked Plate 2.2x /8 7-43/64 T40 SP3822-V40 38SP-... * includes cartridges; however, inserts are sold separately. Key on 60: 1 60: : 2-4 = Imperial (in) = Metric (mm) 60:
17 Revolution rill s 38 Series iameter Range: (55.9mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 38 V50 Shank Style Length Range Shank * Standard 2.2x / /64 T50 R3822-V Standard 3.5x / /64 T50 R3835-V Standard 4.5x / /64 T50 R3845-V Stacked Plate 2.2x /8 7-43/64 T50 SP3822-V50 38SP-... * includes cartridges; however, inserts are sold separately. I Inserts R38... SP38... Replacement Qty. Inserts Needed Mounting Key Size djusting river 38-FI 2 MS-17M-1 5mm S-18T9-1 8T-9 38-J 2 MS-17M-1 5mm S-18T9-1 8T-9 38SP-FI 2 MS-17M-1 5mm S-18T9-1 8T-9 38SP-J 2 MS-17M-1 5mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 11
18 42 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 42 Series iameter Range: (61.0mm mm) L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 2.2x / / /64 1-1/2 4 1/4 R L Standard 3.5x / / /64 1-1/2 4 1/4 R L Standard 4.5x / / /64 1-1/2 4 1/4 R L Stacked Plate 2.2x /4 6-13/ /16 1-1/2 4 1/4 SP L 42SP-... Standard 2.2x R M Standard 3.5x R M Standard 4.5x R M Stacked Plate 2.2x SP M 42SP-... * includes cartridges; however, inserts are sold separately. Shank V40 Shank Style Length Range Shank * Standard 2.2x /64 8-9/64 T40 R4222-V Standard 3.5x / /64 T40 R4235-V Standard 4.5x / /64 T40 R4245-V Stacked Plate 2.2x /4 8-3/16 T40 SP4222-V40 42SP-... * includes cartridges; however, inserts are sold separately. Key on 60: 1 60: : 2-4 = Imperial (in) = Metric (mm) 60:
19 Revolution rill s 42 Series iameter Range: (61.0mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 42 V50 Shank Style Length Range Shank * Standard 2.2x /64 8-9/64 T50 R4222-V Standard 3.5x / /64 T50 R4235-V Standard 4.5x / /64 T50 R4245-V Stacked Plate 2.2x /4 8-3/16 T50 SP4222-V50 42SP-... * includes cartridges; however, inserts are sold separately. I Inserts R42... SP42... Replacement Qty. Inserts Needed Mounting Key Size djusting river 42-FI 2 MS-19M-1 6mm S-18T9-1 8T-9 42-J 2 MS-19M-1 6mm S-18T9-1 8T-9 42SP-FI 2 MS-19M-1 6mm S-18T9-1 8T-9 42SP-J 2 MS-19M-1 6mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 13
20 44 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 44 Series iameter Range: (66.0mm mm) L 7 L 1 2 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 2.2x /64 7-1/2 11-1/2 1-1/2 4 1/4 R L Standard 3.5x / /4 15-1/4 1-1/2 4 1/4 R L Stacked Plate 2.2x /4 7-35/ /64 1-1/2 4 1/4 SP L 44SP-... Standard 2.2x R M Standard 3.5x R M Stacked Plate 2.2x SP M 44SP-... * includes cartridges; however, inserts are sold separately. P 1 Shank V50 Shank Style Length Range Shank * Standard 2.2x /64 8-7/8 T50 R4422-V Standard 3.5x / /8 T50 R4435-V Stacked Plate 2.2x /4 8-59/64 T50 SP4422-V50 44SP-... * includes cartridges; however, inserts are sold separately. R44... SP44... Replacement Qty. Inserts Needed Mounting Key Size djusting river 44-FI 3 MS-19M-1 6mm S-18T9-1 8T-9 44-J 3 MS-19M-1 6mm S-18T9-1 8T-9 44SP-FI 3 MS-19M-1 6mm S-18T9-1 8T-9 44SP-J 3 MS-19M-1 6mm S-18T9-1 8T-9 I Inserts arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) 60:
21 Revolution rill s 46 Series iameter Range: (71.1mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 46 L 7 L 1 2 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 2.2x / /2 4 1/4 R L Standard 3.5x / /4 15-3/4 1-1/2 4 1/4 R L Stacked Plate 2.2x /4 8-3/ /64 1-1/2 4 1/4 SP L 46SP-... Standard 2.2x R M Standard 3.5x R M Stacked Plate 2.2x SP M 46SP-... * includes cartridges; however, inserts are sold separately. P 1 Shank V50 Shank Style Length Range Shank * Standard 2.2x / /64 T50 R4622-V Standard 3.5x / /8 T50 R4635-V Stacked Plate 2.2x /4 9-27/64 T50 SP4622-V50 46SP-... * includes cartridges; however, inserts are sold separately. R46... SP46... Replacement Qty. Inserts Needed Mounting Key Size djusting river 46-FI 3 MS-21M-1 8mm S-18T9-1 8T-9 46-J 3 MS-21M-1 8mm S-18T9-1 8T-9 46SP-FI 3 MS-21M-1 8mm S-18T9-1 8T-9 46SP-J 3 MS-21M-1 8mm S-18T9-1 8T-9 I Inserts arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 15
22 48 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 48 Series iameter Range: (76.2mm mm) L 7 L 1 2 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 1.0x / /64 9-1/ /2 1/4 R L Standard 2.5x / / / /2 1/4 R L Stacked Plate 1.0x / /32 9-3/ /2 1/4 SP L 48SP-... Stacked Plate 2.5x / / / /2 1/4 SP L 48SP-... Standard 1.0x R M Standard 2.5x R M Stacked Plate 1.0x SP M 48SP-... Stacked Plate 2.5x SP M 48SP-... * includes cartridges; however, inserts are sold separately. P 1 Shank V50 Shank Style Length Range Shank * Standard 1.0x / /64 T50 R4810-V Standard 2.5x / /64 T50 R4825-V Stacked Plate 1.0x / /32 T50 SP4810-V50 48SP-... Stacked Plate 2.5x / /32 T50 SP4825-V50 48SP-... * includes cartridges; however, inserts are sold separately. I Inserts R48... SP48... Replacement Qty. Inserts Needed Mounting Key Size djusting river 48-FI 3 MS-21M-1 8mm S-18T9-1 8T-9 48-J 3 MS-21M-1 8mm S-18T9-1 8T-9 48SP-FI 3 MS-21M-1 8mm S-18T9-1 8T-9 48SP-J 3 MS-21M-1 8mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) 60:
23 Revolution rill s 52 Series iameter Range: (81.3mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 52 L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 1.0x /64 5-1/ / /2 1/4 R L Standard 2.5x / / / /2 1/4 R L Stacked Plate 1.0x /64 5-5/ / /2 1/4 SP L 52SP-... Stacked Plate 2.5x / / / /2 1/4 SP L 52SP-... Standard 1.0x R M Standard 2.5x R M Stacked Plate 1.0x SP M 52SP-... Stacked Plate 2.5x SP M 52SP-... * includes cartridges; however, inserts are sold separately. Shank V50 Shank Style Length Range Shank * Standard 1.0x / /64 T50 R5210-V Standard 2.5x / /64 T50 R5225-V Stacked Plate 1.0x / /64 T50 SP5210-V50 52SP-... Stacked Plate 2.5x / /64 T50 SP5225-V50 52SP-... * includes cartridges; however, inserts are sold separately. I Inserts R52... SP52... Replacement Qty. Inserts Needed Mounting Key Size djusting river 52-FI 3 MS-19M-1 6mm S-18T9-1 8T-9 52-J 3 MS-19M-1 6mm S-18T9-1 8T-9 52SP-FI 3 MS-19M-1 6mm S-18T9-1 8T-9 52SP-J 3 MS-19M-1 6mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 17
24 54 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 54 Series iameter Range: (86.4mm mm) L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 1.0x / / / /2 1/4 R L Standard 2.5x / / / /2 1/4 R L Stacked Plate 1.0x / / / /2 1/4 SP L 54SP-... Stacked Plate 2.5x / / / /2 1/4 SP L 54SP-... Standard 1.0x R M Standard 2.5x R M Stacked Plate 1.0x SP M 54SP-... Stacked Plate 2.5x SP M 54SP-... * includes cartridges; however, inserts are sold separately. Shank V50 Shank Style Length Range Shank * Standard 1.0x / /64 T50 R5410-V Standard 2.5x / /64 T50 R5425-V Stacked Plate 1.0x / /16 T50 SP5410-V50 54SP-... Stacked Plate 2.5x / /16 T50 SP5425-V50 54SP-... * includes cartridges; however, inserts are sold separately. I Inserts R54... SP54... Replacement Qty. Inserts Needed Mounting Key Size djusting river 54-FI 3 MS-19M-1 6mm S-18T9-1 8T-9 54-J 3 MS-19M-1 6mm S-18T9-1 8T-9 54SP-FI 3 MS-19M-1 6mm S-18T9-1 8T-9 54SP-J 3 MS-19M-1 6mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) 60:
25 Revolution rill s 56 Series iameter Range: (91.4mm mm) Revolution rill Large iameter Replaceable I Insert rilling System 56 L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 1.0x /8 5-3/4 10-1/ /2 1/4 R L Standard 2.5x /8 11-1/4 15-3/ /2 1/4 R L Stacked Plate 1.0x / / / /2 1/4 SP L 56SP-... Stacked Plate 2.5x / / / /2 1/4 SP L 56SP-... Standard 1.0x R M Standard 2.5x R M Stacked Plate 1.0x SP M 56SP-... Stacked Plate 2.5x SP M 56SP-... * includes cartridges; however, inserts are sold separately. Shank V50 Shank Style Length Range Shank * Standard 1.0x /8 7-1/8 T50 R5610-V Standard 2.5x /8 12-5/8 T50 R5625-V Stacked Plate 1.0x /16 7-3/16 T50 SP5610-V50 56SP-... Stacked Plate 2.5x / /16 T50 SP5625-V50 56SP-... * includes cartridges; however, inserts are sold separately. I Inserts R56... SP56... Replacement Qty. Inserts Needed Mounting Key Size djusting river 56-FI 4 MS-21M-1 8mm S-18T9-1 8T-9 56-J 4 MS-21M-1 8mm S-18T9-1 8T-9 56SP-FI 4 MS-21M-1 8mm S-18T9-1 8T-9 56SP-J 4 MS-21M-1 8mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) : 19
26 58 Revolution rill Large iameter Replaceable I Insert rilling System Revolution rill s 58 Series iameter Range: (96.5mm mm) L 7 L 1 2 P 1 Straight Shank Style Length Range L 1 2 L 7 P 1 * Standard 1.0x /8 5-3/4 10-1/ /2 1/4 R L Standard 2.5x /8 11-3/4 16-1/ /2 1/4 R L Stacked Plate 1.0x / / / /2 1/4 SP L 58SP-... Stacked Plate 2.5x / / / /2 1/4 SP L 58SP-... Standard 1.0x R M Standard 2.5x R M Stacked Plate 1.0x SP M 58SP-... Stacked Plate 2.5x SP M 58SP-... * includes cartridges; however, inserts are sold separately. Shank V50 Shank Style Length Range Shank * Standard 1.0x /8 7-1/8 T50 R5810-V Standard 2.5x /8 13-1/8 T50 R5825-V Stacked Plate 1.0x /16 7-3/16 T50 SP5810-V50 58SP-... Stacked Plate 2.5x / /16 T50 SP5825-V50 58SP-... * includes cartridges; however, inserts are sold separately. I Inserts R58... SP58... Replacement Qty. Inserts Needed Mounting Key Size djusting river 58-FI 4 MS-21M-1 8mm S-18T9-1 8T-9 58-J 4 MS-21M-1 8mm S-18T9-1 8T-9 58SP-FI 4 MS-21M-1 8mm S-18T9-1 8T-9 58SP-J 4 MS-21M-1 8mm S-18T9-1 8T-9 arbide Grade Geometry M300 M200 TiN Insert s river 5 (P35) Standard OP-05T308-P OP-05T308-H OP-05T308-T IS T-9 1 (K35) Standard OP-05T308-1P OP-05T308-1H OP-05T308-1T IS T-9 2 (K25) Standard OP-05T308-2P OP-05T308-2H - IS T-9 5 (P35) High Rake OP-05T308-PHR OP-05T308-HHR - IS T-9 Key on 60: 1 60: : 2-4 Mounting screws sold in multiples of 4 djusting screws sold in multiples of 4 I inserts sold in multiples of 10 Insert screws sold in multiples of 10 = Imperial (in) = Metric (mm) 60:
27 Revolution rill Large iameter Replaceable I Insert rilling System This page left intentionally blank : 21
28 Revolution rill Large iameter Replaceable I Insert rilling System Recommended utting ata Imperial (inch) ISO P Material Hardness (HN) Speed (SFM) M300 M200 TiN Feed Rate (IPR) Free Machining Steel , 1215, 12L14, etc. Low arbon Steel , 1020, 1025, 1522, 1144, etc. Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc. lloy Steel , 5140, 8640, etc. High Strength lloy , 4330V, 300M, etc. Structural Steel , 285, 516, etc. Tool Steel H-13, H-21, -4, 0-2, S-3, etc. S M High Temp lloy Hastelloy, Inconel 600, etc. Stainless Steel 400 Series , 420, etc. Stainless Steel 300 Series , 316, 17-4PH, etc. Super uplex Stainless Steel K Nodular, Grey, uctile ast Iron N ast luminum Wrought luminum rass Material onstants Type of Material Hardness (HN) K m (lbs/in 2 ) Free Machining Steel Low arbon Steel Medium arbon Steel lloy Steel High Strength Steel Structural Steel Tool Steel High Temperature lloy Titanium lloy erospace lloy Stainless Steel 400 Series Stainless Steel 300 Series Super uplex Stainless Steel Wear Plate Hardened Steel Nodular, uctile ast Iron Grey ast Iron ast luminum Wrought luminum luminum ronze rass opper Formulas 1. RPM = (3.82 SFM) / I where: RPM = revolutions per minute (rev/min) SFM = speed (ft/min) I = diameter of drill (inch) 2. HP = ( I 2 IPR RPM K m ) / 0.80 where: Tool Power = tool power (HP) I = diameter of drill (inch) IPR = feed rate (in/rev) RPM = revolutions per minute (rev/min) K m = specific cutting energy (lbs/in 2 ) machine efficiency (using 0.80 as constant) 3. Thrust = 148,500 IPR I K m where: Thrust = axial thrust (lbs) IPR = feed rate (in/rev) I = diameter of drill (inch) K m = specific cutting energy (lbs/in 2 ) 5. Torque = (HP 5252) / RPM where: Torque = torque (ft/lbs) HP = tool power (HP) RPM = revolutions per minute (rev/min) The table and equations on this page are found in the Machinery s Handbook. Permission to simplify and print the equations is granted by the ditor of the Machinery s Handbook. IMPORTNT: The speeds and feeds listed above are considered a general starting point for all applications. Factory technical assistance is available for your specific applications through our pplication ngineering department. 60:
29 Revolution rill Large iameter Replaceable I Insert rilling System Recommended utting ata Metric (mm) ISO P Material Hardness (HN) Speed (M/min) M300 M200 TiN Feed Rate (mm/rev) Free Machining Steel , 1215, 12L14, etc. Low arbon Steel , 1020, 1025, 1522, 1144, etc. Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc. lloy Steel , 5140, 8640, etc. High Strength lloy , 4330V, 300M, etc. Structural Steel , 285, 516, etc. Tool Steel H-13, H-21, -4, 0-2, S-3, etc. S M High Temp lloy Hastelloy, Inconel 600, etc. Stainless Steel 400 Series , 420, etc. Stainless Steel 300 Series , 316, 17-4PH, etc. Super uplex Stainless Steel K Nodular, Grey, uctile ast Iron N ast luminum Wrought luminum rass Material onstants Type of Material Hardness (HN) K m (lbs/in 2 ) Free Machining Steel Low arbon Steel Medium arbon Steel lloy Steel High Strength Steel Structural Steel Tool Steel High Temperature lloy Titanium lloy erospace lloy Stainless Steel 400 Series Stainless Steel 300 Series Super uplex Stainless Steel Wear Plate Hardened Steel Nodular, uctile ast Iron Grey ast Iron ast luminum Wrought luminum luminum ronze rass opper Formulas 1. RPM = ( M/min) / I where: RPM = revolutions per minute (rev/min) M/min = speed (M/min) I = diameter of drill (mm) 2. kw = (I 2 mm/rev RPM K m ) / 181,018 where: kw = tool power (kw) I = diameter of drill (mm) mm/rev = feed rate (mm/rev) RPM = revolutions per minute (rev/min) K m = specific cutting energy (kpa) machine efficiency (using 181,018 as constant) 3. Thrust = mm/rev I K m where: Thrust = axial thrust (N) mm/rev = feed rate (mm/rev) I = diameter of drill (mm) K m = specific cutting energy (kpa) 5. Torque = (kw ) / RPM where: Torque = torque (Nm) HP = tool power (kw) RPM = revolutions per minute (rev/min) The table and equations on this page are found in the Machinery s Handbook. Permission to simplify and print the equations is granted by the ditor of the Machinery s Handbook. IMPORTNT: The speeds and feeds listed above are considered a general starting point for all applications. Factory technical assistance is available for your specific applications through our pplication ngineering department : 23
30 Guaranteed Test / emo pplication Form istributor PO # The following must be filled out completely before your test will be considered istributor Information ompany Name: ontact: ccount Number: Phone: mail: nd User Information ompany Name: ontact: Industry: Phone: mail: urrent Process List all tooling, coatings, substrates, speeds and feeds, tool life, and any problems you are experiencing Test Objective List what would make this a successful test (i.e. penetration rate, finish, tool life, hole size, etc.) pplication Information Hole iameter: in/mm Tolerance: Material: Pre-existing iameter: in/mm epth of ut: in/mm Hardness: Required Finish: RMS State: (4150 / 36 / ast Iron / etc.) (HN / Rc) (asting / Hot rolled / Forging) Machine Information Machine Type: uilder: Model #: (Lathe / machine / Machine center / etc.) (Haas, Mori Seiki, etc.) Shank Required: Power: HP/KW (T50 / Morse taper, etc.) Rigidity: Orientation: Tool Rotating: Thrust: lbs/n xcellent Vertical Yes Good Horizontal No Poor oolant Information oolant elivery: oolant Pressure: PSI / bar (Through tool / Flood) oolant Type: oolant Volume: GPM / LPM (ir mist, oil, synthetic, water soluble, etc.) Requested Tooling QTY Item Number QTY Item Number llied Machine & ngineering 120 eeds rive over, OH Telephone: (330) Toll Free US & anada: (800) Fax: (330) : 24
31 Warranty Information llied Machine & ngineering warrants to original equipment manufacturers, distributors, industrial and commercial users of its products that each new product manufactured or supplied by llied Machine shall be free from defects in material and workmanship. llied Machine's obligation under this warranty is limited to furnishing without additional charge a replacement or, at its option repairing or issuing credit for any product which shall within one year from the date of sale be returned freight prepaid to the plant designated by an llied Machine representative and which upon inspection is determined by llied Machine to be defective in materials or workmanship. omplete information as to operating conditions, machine, set-up, and application of cutting fluid should accompany any product returned for inspection. The provisions of this warranty shall not apply to any llied Machine products which have been subjected to misuse, improper operating conditions, machine set-up or application of cutting fluid or which have been repaired or altered if such repair or alteration in the judgment of llied Machine would adversely affect performance of the product. THIS WRRNTY IS IN LIU OF LL OTHR WRRNTIS, PRSS OR IMPLI, INLUING NY IMPLI WRRNTY OF MRHNTILITY OR FITNSS FOR PRTIULR PURPOS. llied Machine shall have no liability or responsibility on any claim of any kind, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. LL PRIS, LIVRIS, SIGNS, N MTRILS R SUJT TO HNG WITHOUT NOTI. llied Machine & ngineering Registered to ISO
32 United States llied Machine & ngineering 120 eeds rive over OH United States Phone: Fax: Toll Free US and anada: Toll Free US and anada: llied Machine & ngineering 485 W Third Street over OH United States Phone: Fax: (ngineering ept.) Toll Free US and anada: urope llied Machine & ngineering o. (urope) Ltd. 93 Vantage Point Pensnett state Kingswinford West Midlands Y6 7FR ngland Phone: +44 (0) Wohlhaupter GmbH Maybachstrasse 4 Postfach Frickenhausen Germany Phone: +49 (0) Fax: +49 (0) sia Wohlhaupter India Pvt. Ltd. -23, 2nd Floor lock ommunity entre Janakpuri, New elhi India Phone: +91 (0) Your local llied Machine representative: llied Machine & ngineering is registered by QS to ISO llied Machine & ngineering vailable Online Only: 60-RV Publish ate: May 2017
Boring. Reaming. Burnishing. Threading ASC 320 DRILLING. High Penetration Solid Carbide Drills. Specials
oring Reaming urnishing Threading S 320 High Penetration Solid arbide rills Specials The Foundation Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions to
More informationBoring. Reaming. Burnishing. Threading. Drilling ASC 320. High Penetration Solid Carbide Solutions. Specials
oring Reaming urnishing Threading rilling S 320 High Penetration Solid arbide Solutions Specials S 320 High Penetration Solid arbide rilling System iameter Range: 3.00mm - 20.00mm (0.1181-0.7874 ) eyond
More informationBoring. Reaming. Burnishing. Threading. Drilling. BT-A Drill. BTA-STS (Single Tube System) Machining. Specials
oring Reaming urnishing Threading rilling T- rill T-STS (Single System) Machining Specials T- rill T (STS) eep Hole Machining System iameter Range: 12.95mm - 47.80mm (0.5100-1.8820 ) Material jection with
More informationPages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations
pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder
More informationGEN2 T-A Drill Inserts
RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationAccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
More informationDrilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationVertical Multi-stage Pumps - 60 Hz.
P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationTAPS AND DIES. American Made American Owned
TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut
More informationG Rotary Unions. For coolant, water, oil and air service. High speed rotating unions for transferring fluids and air.
G Rotary Unions or coolant, water, oil and air service Precision rotary unions for more effective cooling and lubrication. High speed rotating unions for transferring fluids and air. ontents Type G Rotary
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationHeimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than
More informationNo. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
More informationPRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
More informationDEEP GROOVING. insert height A 6.35 B 8.43 chipbreaker. corner radius Metric Description EDP Code W R L H A
Deep Grooving Insert Nomenclature hart VDG 318 M 20 vee-bottom deep grooving insert height 6.35 8.43 chipbreaker groove width Metric 3,18 3,96 4,78 5,54 6,35 7,92 9,53 metric corner radius Metric 0.20
More informationturning centers Haas Automation Inc. TURNING CENTERS
All New turning centers The New Generation Haas turning centers are the culmination of 15 years of continuous development, and they offer the most performance for the money the best value of any turning
More information2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
More informationHolemaking ADVANCES 2017 Inch
Holemaking ADVANCES 2017 Inch Holemaking Introduction... Q1 Q8 Solid Carbide Drills... R1 R139 Modular Drills...S1 S51 Indexable Drills... T1 T60 Hole Finishing... U1 U95 Q1 Holemaking Made Easy and Economical
More informationInline & 90 Live Swivels Fax:
Inline & 90 Live Swivels www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 CW1602 Super Swivels was established in 1986. Our goal is to manufacture heavy-duty, leak free,
More informationCOOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
More informationMorin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
More informationDrills for Industrial Maintenance and Repair Applications
Drills for Industrial Maintenance and Repair Applications Dormer Pramet is your one-stop manufacturer with a comprehensive program of rotary and indexable tooling with more than 150 years of industry experience.
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationHigh Speed Spindles Series
High Speed Spindles Series onstant High Speed and Torque 25,000-90,000 rpm,
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationTOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationGBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
More informationS-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
More informationCLIMAX OD MOUNT FLANGE FACERS
CLIMAX OD MOUNT FLANGE FACERS 06 2018 FF122436 VERSATILITY. DURABILITY. SAFETY. The latest innovation in Climax's line of flange facers, this series of OD Mount Flange Facers set a new standard in safety,
More informationNewest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
More informationOld Seal Kits. Instructions - Parts B. Piston Seal Kits, see page 2. Cylinder Seal Kits for A-Side Pumps, see page 2
Instructions - Parts Old Seal Kits 32348B To replace proportioning pump piston seal sets or cylinder seal sets used on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More informationinsert height A.250 B.337 chipbreaker corner radius Inch Metric.008 0, , , ,8 w Description EDP Code Inch Metric R L H A
Deep Grooving Insert Nomenclature hart VDG 125 008 vee-bottom deep grooving insert height.250.337 chipbreaker GOOVING groove idth Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53
More informationThe Next Generation. Formulatory Expertise & Comprehensive Technical Support
Formulatory Expertise & Comprehensive Technical Support The Next Generation An ISO 9001:2008 COmpAny QualiChem, Inc. 2003 Salem Industrial Drive Salem, VA 24153 540.375.6700 540.375.3880 FAX AN ISO 9001:2008
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products RS SERIES HYDRULIC MOTORS RS overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech. Unlike competitive products using
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationSC series Stopper Cylinders
SERIES 60,000 PSI tensile strength electro-less nickel rod bearing High strength threaded connection Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover series Stopper Cylinders Common
More informationSC series Stopper Cylinders
High strength threaded connection Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire 60,000 PSI tensile strength electro-less nickel rod bearing Low friction figure 8 piston seal
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE 2017 12 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationLOR Series Trig-O-Matic Lite Overload Release Clutch
LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationMetAl. Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits.
MetAl Optimum core drilling with the new FEIN KBB core drilling units and HSS drill bits. Introduction New application solutions from FEIN. In 1895, FEIN invented the world s first electric hand drill.
More informationInstallation Catalog
merican Truckboxes, LL. Quality uilt Tool oxes Installation atalog Pure & Tough For the Working Man WWW.TRUKOX.OM Welcome to merican Truckboxes, LL, Manufacturers of Web Page: www.truckbox.com 2017 merican
More informationKED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationXRAY S Parallel Opening/Closing Type Gripper 2 Finger 2200N
XRAY S 2200 2 Finger 2200N Handles big jobs with tremendous torque and force capability. Long jaws are no problem with the incorporated linear bearing rail. Sealed for years of trouble free use in tough
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationModels P, P, P, , DANGER
Installation and maintenance guide Air filter Models 600104P, 600106P, 600108P, 600112, 600116 Date of issue January 2015 Form number 404646B Section G10 Page 31B DANGER Read manual prior to installation
More informationCOATING SELECTION CHART
On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationNEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL PRODUCTS User Manual Precision Roller Pinion System RPS 16 RPS20, RPS25, RPS32, RPS40 Premium and Standard Models DANGER Read this manual carefully before installation and operation.
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationVB-9313 Series. Application. Features. Applicable Literature
V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or
More informationApex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.
pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationRevolutionary High Speed Technology
Revolutionary High Speed Technology Power, Precision and Reliability at 25,000-90,000 rpm to 1.60 hp +1.561.994.0500 www.airturbinetools.com info@airturbinetools.com HIGH SP SPINLS re Your Machine Spindle
More informationEngine Driven Products
Engine riven Products ore Values 1. We respect each other, our community and the environment. 2. We are ethical and honest in all of our business dealings. 3. We are diligent in protecting the safety of
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationFF3000 PORTABLE FLANGE FACER
FF3000 PORTABLE FLANGE FACER FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Compact, lightweight, and easy to set up. Compact and Versatile Patented, low profile machine is one of the
More informationHorizontal Hydraulic Driver
Repair-Parts Horizontal Hydraulic Driver 3A000A ENG For use with two horizontally mounted proportioning pumps. For professional use only. Not for use in explosive atmospheres. 5877 - Horizontal Hydraulic
More informationLM5200 milling machine
LM5200 milling machine 2013 10 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationE24-E28 M88 & S38 Mass Air Flow Conversion System Instruction Manual
E24-E28 M88 & S38 Mass Air Flow Conversion System Instruction Manual Miller Performance Ltd. Tel 855.BMW.TUNER 2009 Abbotsford Way, Abbotsford BC, V2S 6Y5 Millerperformancecars.com Table of Contents: 1.
More information