Pages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations

Size: px
Start display at page:

Download "Pages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations"

Transcription

1

2 pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder Pages Standard 50 NMT Shank Holder Pages rill Pages 8-13 Grinding Fixture, Top Mounting Plate and ylindrical Grinding Fixture Page 22 Flat ottom rill Pages 8-12 Rotary oolant dapter Page Spot and hamfer rill Pages 8-11 Speed & Feed hart and oolant Recommendations Pages I llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

3 Item Numbering System High Performance Spade rill Item Number SP RILL RILL TYP 02 - High Speed Steel SRIS F 7 - G 8 - H 1028T OTING T - TiN - TilN N - TiN Spade rill Item Number SP RILL RILL TYP 02 - Spade rill 04 - Flat ottom Spot & hamfer SRIS F 7 - G 8 - H 1 - H H 3 - H 9 J - J MTRIL 2 - M-2 (J Only) 4 - High Speed Steel (PM-M4 HSS) 5 - Super obalt (PM-T15 S) Holder Item Number RILL HOLR LSSIFITION 02 - Stub Straight Shank #125 (N) 04 - Short Straight Shank #150 (N) 06 - Short Straight Shank #100 () 08 - Standard Straight Shank #200 () 10 - Long Straight Shank #250 () 14 - Short Taper Shank #300 (N) 15 - Short Taper Shank #300 (TS) 16 - Short Taper Shank #400 () 18 - Standard Taper Shank #500 () 20 - Long Taper Shank #600 () 22 - xtra Long Taper Shank #700 SR () 24 - Short 50 NMT Shank #300 (N) 26 - Short 50 NMT Shank #400 () 28 - Standard 50 NMT Shank #500 () SRIS F 7 - G 8 - H = oolant N = No oolant iameters by 1/ IMTR Whole inches IMTR In 1/32 inch increments llied Machine & ngineering orp. High Performance and Style Spade rills and Holders iameters 1/32 and ecimal iameters IMTR Whole inches 1/64 and ecimal iameters IMTR Whole inches IMTR Whole inches ecimal IMTR ecimal portion IMTR ecimal portion ecimal iameters iameters by 1/ T IMTR Whole inches IMTR In 1/16 inch increments 1/32 and ecimal iameters IMTR Whole inches ecimal IMTR ecimal portion 1/64 and ecimal iameters IMTR ecimal portion ecimal HOLR STYL 1 - SHNK SIZ N ONFIGURTION #2 Morse Taper Shank #3 Morse Taper Shank #4 Morse Taper Shank #5 Morse Taper Shank #6 Morse Taper Shank Straight Shank Straight Shank Straight Shank Straight Shank Straight Shank Straight Shank Straight Shank OTING T - TiN - TilN N - TiN II

4 High Performance Spade rills - High Performance Item Number and oating Inch ecimal TiN ❶ TilN ❶ TiN ❶ Locating rea Thickness Reference 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/ T T T T T T T T T N N N N N N N N N /16 1/4 7/8 1-9/32 1-5/ /32 1-3/ T T T T N N N N / /32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/ T T T T T T T T T T N N N N N N N N N N /4 3/16 7/8 1-9/32 1-5/ /32 1-3/ T T T T N N N N /4 1-9/32 1-5/ /32 1-3/8 1-13/32 1-7/ /32 1-1/ T T T T T T T T T N N N N N N N N N /16 9/32 1-3/32 F T U R S When compared to uncoated Style Spade rills, TiN, TiN, and TilN oated High Performance Spade rills can increase production from 100% to 500%. Unique tool geometry reduces thrust up to 30% when compared to uncoated Style Spade rills. Single piece design in through series eliminates the need for adapters assuring maximum tool performance in these smaller sizes. The series High Performance Spade rills are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:. 2 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

5 High Performance Spade rills Item Number and oating Inch ecimal TiN ❶ TilN ❶ TiN Thickness Reference 1-17/32 1-9/ /32 1-5/8 1-21/ / /32 1-3/4 1-1/2 1-17/32 1-9/ /32 1-5/8 1-21/ / /32 1-3/4 1-25/ / /32 1-7/8 1-29/ / / /32 2-1/16 2-3/32 2-1/8 2-5/32 2-3/16 2-7/32 2-1/4 2-9/32 2-5/ /32 2-3/ T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N-0212 ❶ Locating rea 1-1/16 9/32 1-3/32 1-1/4 5/ /64 ❶ vailability odes. Stocked. Subject to prior sale. urrently stocked in limited quantities. dvanced planning is recommended. Non-stocked Standard - see High Performance and Price List for Process Fee and elivery. Sizes not shown (Non-Standard iameters) are available in all coatings. (Process Fee applies - see High Performance and Price List). When ordering please follow the examples shown below: 64 ths = 1-33/64 TiN ( ) = 1023T ecimals = TilN ( ) = llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 3

6 High Performance Spade rills Inch 2 2-1/32 2-1/16 2-3/32 2-1/8 2-5/32 2-3/16 2-7/32 2-1/4 2-9/32 2-5/ /32 2-3/8 2-13/32 2-7/ /32 2-1/2 2-17/32 2-9/ /32 2-5/8 2-21/ / /32 2-3/4 2-25/ / /32 2-7/8 2-1/2 2-17/32 2-9/ /32 2-5/8 2-21/ / /32 2-3/4 2-25/ / /32 2-7/8 2-29/ / /32 3 Item Number and oating Holder Reference s Locating Thickness dapter w/ ecimal ❶ rea TiN ❶ TilN ❶ TiN 1024T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T H High Performance N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N-0300 dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately 1-3/4 3/8 1-55/64 1-3/16 2-1/16 7/16 2-3/32 1-7/16 4 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

7 High Performance Spade rills F F Inch 3-1/32 3-1/16 3-3/32 3-1/8 3-5/32 3-3/16 3-7/32 3-1/4 3-9/32 3-5/ /32 3-3/ /32 3-1/16 3-3/32 3-1/8 3-5/32 3-3/16 3-7/32 3-1/4 3-9/32 3-5/ /32 3-3/8 3-13/32 3-7/ /32 3-1/2 3-17/32 3-9/ /32 3-5/8 3-21/ / /32 3-3/4 3-25/ / /32 3-7/8 Item Number and oating Holder Reference s Locating Thickness dapter w/ ecimal ❶ rea TiN ❶ TilN ❶ TiN 1025T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N /16 7/16 2-3/32 1-7/16 2-5/8 1/2 2-17/ /16 dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately ❶ vailability odes. Stocked. Subject to prior sale. urrently stocked in limited quantities. dvanced planning is recommended. Non-stocked Standard - see High Performance and Price List for Process Fee and elivery. Sizes not shown (Non-Standard iameters) are available in all coatings.(process Fee applies - see High Performance and Price List). When ordering please follow the examples shown below: 64 ths = 3-3/64 TiN ( ) = 1025T ecimals = TilN (F ) = llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 5

8 High Performance Spade rills G G H 1 H 2 Inch 3-1/2 3-17/32 3-9/ /32 3-5/8 3-21/ / /32 3-3/4 3-25/ / /32 3-7/8 3-29/ / / /16 4-1/8 4-3/16 4-1/4 4-5/16 4-3/8 4-7/16 4-1/ /16 4-1/8 4-3/16 4-1/4 4-5/16 4-3/8 4-7/16 4-1/2 4-9/16 4-5/8 4-11/16 4-3/4 4-13/16 4-7/8 4-15/16 5 Item Number and oating Holder Reference s Locating Thickness dapter w/ ❶ rea ecimal TiN ❶ TilN ❶ TiN 1027T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T-0500 ❶ vailability odes. Stocked. Subject to prior sale. urrently stocked in limited quantities. dvanced planning is recommended. Non-stocked Standard - see High Performance and Price List for Process Fee and elivery. - H High Performance N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N-0500 dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately 3-1/16 5/8 2-23/ /16 3-1/2 11/16 3-3/32 2-3/16 3-1/2 11/16 3-3/32 2-3/16 Sizes not shown (Non-Standard iameters) are available in all coatings. (Process Fee applies - see High Performance and Price List). When ordering please follow the examples shown below: 64 ths = 3-33/64 TiN (G ) = 1027T nds = 4-9/32 TilN (H ) = ecimals = TiN (H ) = 1028N llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

9 High Performance dapters dapter Item Number iameter Holder Location Thick-ness Reference lade Location 1024U-dapter /4 3/8 43/64 15/ U-dapter /16 7/16 21/32 1-3/16 F 1026U-dapter /8 1/2 23/32 1-1/4 G 1027U-dapter /16 5/8 25/ /16 H 1028U-dapter /2 11/16 29/32 2-1/4 Interchangeability One each, through H series, High Performance dapters and holders allow the use of the complete range of High Performance Spade rills. dapters are not needed for through series. Our High Performance Spade rills and dapters interchange with other Style rill Holders and are manufactured to NSI TYP I specifications. Regrinds High Performance rills should be reground and coated by M before returning them to production. The real economy of Spade rills is their improved production rates (100% to 500%) and increased tool life (3 to 20 times). Factory regrinding and coating provides LIK-NW TOOL PRFORMN. Our factory service reduces your total cost per hole. Non-Standard iameters The diameter range is 31/32 to 5 in.001 increments. Lead time is four weeks. We recommend that you contact your local M distributor to discuss a stocking commitment for the non-standard diameters that you will be purchasing repetitively. This will assure off-the-shelf delivery. Please refer to the Non-Standard iameter section in our price sheet for more information. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 7

10 Spade rills Inch 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 1-9/32 1-5/ /32 1-3/8 31/ /32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 1-9/32 1-5/ /32 1-3/8 1-1/4 1-9/32 1-5/ /32 1-3/8 1-13/32 1-7/ /32 1-1/2 Item Number ecimal PM-M PM-T15 (Super obalt) Flat ottom Spot and hamfer P.O.R N/ N/ N/ P.O.R N/ N/ N/ P.O.R Locating rea Thickness Reference 13/16 1/4 1-5/32 3/4 3/16 1-5/32 1-1/16 9/ /32 The series Style Spade rills are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:. P.O.R. - Priced on Request. 8 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

11 Spade rills Flat ottom 90 Spot and hamfer Item Number Inch ecimal PM-M4 PM-T15 (Super obalt) Flat ottom 90 Spot and hamfer Locating rea Thickness Reference 1-17/32 1-9/ /32 1-5/8 1-21/ / /32 1-3/ N/ N/ N/ 1-1/16 9/ /32 1-1/2 1-17/32 1-9/ /32 1-5/8 1-21/ / /32 1-3/4 1-25/ / /32 1-7/8 1-29/ / / P.O.R /4 5/ /32 2-1/16 2-3/32 2-1/8 2-5/32 2-3/16 2-7/32 2-1/4 2-9/32 2-5/ /32 2-3/ N/ N/ N/ Sizes not shown (Non-Standard iameters) are available in all coatings. (Process Fee applies - see High Performance and Price List). When ordering please follow the examples shown below: 64 ths = 1-17/64 PM-M4 ( ) = nds = 1-9/32 PM-T15 ( ) = ecimals = Flat ottom ( ) = oating Options (Process Fee applies - see High Performance and Price List). Please add T,, or N to the end of the item number to specify coating type when ordering. T for TiN T for TilN N for TiN N Non-Standard iameter delivery is 5 working days. Please allow working days for TiN, TilN or TiN coating. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 9

12 Spade rills Flat ottom 90 Spot and hamfer Item Number Inch ecimal PM-M4 PM-T15 (Super obalt) Flat ottom 90 Spot and hamfer Locating rea Thickness Reference 2 2-1/32 2-1/16 2-3/32 2-1/8 2-5/32 2-3/16 2-7/32 2-1/4 2-9/32 2-5/ /32 2-3/8 2-13/32 2-7/ /32 2-1/ P.O.R /4 3/8 2-3/8 2-17/32 2-9/ /32 2-5/8 2-21/ / /32 2-3/4 2-25/ / /32 2-7/ N/ N/ N/ 2-1/2 2-17/32 2-9/ /32 2-5/8 2-21/ / /32 2-3/4 2-25/ / /32 2-7/8 2-29/ / / P.O.R /16 7/16 2-5/8 P.O.R. - Priced on Request. 10 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

13 Spade rills Item Number Inch ecimal PM-M4 PM-T15 (Super obalt) Flat ottom 90 Spot and hamfer Locating rea Thickness Reference 3-1/32 3-1/16 3-3/32 3-1/8 3-5/32 3-3/16 3-7/32 3-1/4 3-9/32 3-5/ /32 3-3/ N/ N/ N/ 2-1/16 7/16 2-5/8 F 3 3-1/32 3-1/16 3-3/32 3-1/8 3-5/32 3-3/16 3-7/32 3-1/4 3-9/32 3-5/ /32 3-3/8 3-13/32 3-7/ /32 3-1/ P.O.R /8 1/2 3-1/8 F 3-17/32 3-9/ /32 3-5/8 3-21/ / /32 3-3/4 3-25/ / /32 3-7/ N/ N/ N/ Sizes not shown (Non-Standard iameters) are available in all coatings. (Process Fee applies - see High Performance and Price List). When ordering please follow the examples shown below: 64 ths = 3-5/64 PM-M4 (F ) = nds = 6-9/32 PM-T15 (F ) = ecimals = T15 (F ) = Non-Standard iameter delivery is 5 working days. oating Options (Process fee applies - see High Performance and Price List)). Please add T,, or N to the end of the item number to specify coating type when ordering. T for TiN T for TilN N or TiN N Please allow working days for TiN, TilN or TiN coating. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 11

14 Spade rills Flat ottom Item Number Inch ecimal PM-M4 PM-T15 (Super obalt) Flat ottom Locating rea Thickness Reference G 3-1/2 3-17/32 3-9/ /32 3-5/8 3-21/ / /32 3-3/4 3-25/ / /32 3-7/8 3-29/ / / /16 5/8 3-3/8 G 4-1/16 4-1/8 4-3/16 4-1/4 4-5/16 4-3/8 4-7/16 4-1/ N/ N/ H /16 4-1/8 4-3/16 4-1/4 4-5/16 4-3/8 4-7/16 4-1/ /2 11/ /16 H 2 4-9/16 4-5/8 4-11/16 4-3/4 4-13/16 4-7/8 4-15/ /2 11/ /16 12 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

15 Spade rills Inch 5-1/8 H 3 5-1/4 5-3/8 5-1/2 5-5/8 H 4 5-3/4 5-7/ /8 H 5 6-1/4 6-3/8 6-1/2 6-5/8 H 6 6-3/4 6-7/ /8 H 7 7-1/4 7-3/8 7-1/2 7-5/8 H 8 7-3/4 7-7/ /8 H 9 8-1/4 8-3/8 8-1/2 Item Number ecimal PM-M Locating rea Reference 3-1/2 11/ /16 3-1/2 11/ /16 3-1/2 11/ /16 3-1/2 11/ /16 3-1/2 11/ /16 3-1/2 11/ /16 3-1/2 11/ /16 J Inch 6 6-1/4 6-1/2 6-3/ /4 7-1/2 7-3/4 Item Number ecimal M2 102J J J J J J Sizes not shown (Non-Standard iameters) are available in all coatings. (Process Fee applies - see High Performance and Price List). When ordering please follow the examples shown below: 64 ths = 7-63/64 PM-M4 (H 8 ) = nds = 6-9/32 PM-M4 (H 5 ) = ecimals = M2 (J ) = 102J Non-Standard iameter delivery is 5 working days. Locating rea Thickness Thickness Reference 5-1/4 15/ /16 The J series Style Spade rills are no longer stocked items. Items listed are available and subject to prior sale. ll others P.O.R. iameter Range: 6 to 11 oating Options (Process fee applies - see High Performance and Price List)). Please add T,, or N to the end of the item number to specify coating type when ordering. T for TiN T for TiN N for TilN N Please allow working days for TiN, TilN or TiN coating. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 13

16 Stub Straight Shank Holder #125 (No oolant) Item Number 1 lade iameter utting Range Ref. Ref. Flute ia. Shank Overall /2-2-3/8 2-19/ / /8 2-47/64 3-1/4 2-1/4 1-1/ / /2-3-3/8 3-1/32 3-9/16 2-1/ /2 F /8 3-13/ /4 2-1/ /4 Short Straight Shank Holder #150 (No oolant) Item Number 1 lade ia. utting Range Ref. Ref. Flute Shank Overall 14 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders ia /8 3-1/4 3-17/ /2 6-1/ /32-1-3/8 3-1/4 3-17/32 3 3/4 3-1/2 6-1/ /32-1-3/8 3-1/4 3-17/ /2 6-1/ /4-1-3/4 3-25/32 4-3/32 3-1/ / /2-2-3/8 4-19/ / /8 4-63/64 5-1/2 4-1/2 1-1/ / F /2 2-1/ /8-3-3/8-3-7/8-3-7/8 5-17/ /32 6-5/32 6-5/32 6-1/16 6-1/16 6-3/4 6-3/ /2 5-1/2 1-3/ /2 dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately iscontinued Item. This product will be available as a quoted special once current inventory is depleted. The series Holders are no longer stocked items. Items listed are subject to prior sale. Suggested lternative: /2 9-1/2

17 Short Straight Shank Holder #100 (oolant) Item Number F G H F lade iameter utting Range /32 31/32 1-1/4 1-1/4 1-1/4 1-1/2 1-1/ /2 2-1/ /2 3-1/ /8-1-3/8-1-3/8-1-3/8-1-3/4-1-3/4-1-3/4-2-3/8-2-3/8-2-7/8-2-7/8-3-3/8-3-3/8-3-7/8-3-7/8-4-1/2-4-1/2-8-1/2-8-1/2 Ref. 3-1/4 3-1/4 3-1/4 3-1/4 3-25/ / / / / / / / /32 6-5/32 6-5/ / / / /32 Ref. 3-17/ / / /32 4-3/32 4-3/32 4-3/ /2 5-1/2 6-1/16 6-1/16 6-3/4 6-3/4 7-7/16 7-7/16 8-9/16 8-9/16 Flute /2 3-1/2 3-1/ /2 4-1/ /2 5-1/ ia / / /4 1-1/2 1-1/4 1-1/2 1-1/2 1-3/4 1-3/ /2 2-1/ /2 3 Shank 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/ Overall 6-1/2 6-1/2 6-1/2 6-1/ /2 8-1/ /2 9-1/ Pipe Tap 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Through-the-holder coolant flow is recommended, even in shallow hole drilling applications, to improve performance and tool life. Threaded taper pipe holes allow attachment of coolant from the side or end of a holder. pplication Solution iscontinued Item. This product will be available as a quoted special once current inventory is depleted. The series Holders are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 15

18 Standard Straight Shank Holder #200 (oolant) Item Number F lade ia. utting Range /32 31/32 31/32 1-1/4 1-1/4 1-1/4 1-1/2 1-1/ /8-1-3/8-1-3/8-1-3/8-1-3/8-1-3/4-1-3/4-1-3/4-2-3/8-2-3/8-2-7/8-2-7/8 Ref / / / / / / /64 Ref. 8-9/32 8-9/32 8-9/32 8-9/32 8-9/ / / /32 9-1/2 9-1/ Flute 7-3/4 7-3/4 7-3/4 7-3/4 7-3/4 8-1/8 8-1/8 8-1/8 8-1/2 8-1/2 9 9 ia /2 3/ / /4 1-1/2 1-1/4 1-1/2 1-1/2 1-3/4 Shank 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/ Overall 11-1/4 11-1/4 11-1/4 11-1/4 11-1/4 11-5/8 11-5/8 11-5/8 12-1/2 12-1/ /2-3-3/ / / / /8 12-5/ /4 11-1/ /2 1/2 F /8 12-5/ /4 11-1/2 2-1/ /2 1/2 G /2-4-1/ / / / / /2-4-1/ / / /2 H / / / / / / / / /2 Pipe Tap 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Long Straight Shank Holder #250 (oolant) Item Number 1 F lade iameter utting Range Ref. Ref. Flute Shank Overall iscontinued Item. This product will be available as a quoted special once current inventory is depleted. The series Holders are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:. 16 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders ia /8 15-1/ / /2 18-1/2 1/ /32-1-3/8 15-1/ / /2 18-1/2 1/ /4-1-3/4 15-9/ / /4 3-1/2 18-1/2 1/ /2-2-3/ / / / / / / / /2-3-3/ / / /2 F / / / / /2 dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately Pipe Tap

19 Short Taper Shank Holder #300 (No oolant) 1 Item lade ia. Flute Shank Overall Number utting Range Ref. Ref. MT /8 3-7/ /32 3 #3 3-7/8 6-7/ /8 3-1/2 3-25/32 3 #4 4-7/8 7-7/ /32-1-3/8 3-7/ /32 3 #3 3-7/8 6-7/ /32-1-3/8 3-1/2 3-25/32 3 #4 4-7/8 7-7/ /4-1-3/4 3-31/32 4-9/32 3-1/2 #3 3-7/8 7-3/ /4-1-3/4 4-1/ /32 3-1/2 #4 4-7/8 8-3/ /2-2-3/8 4-35/64 5-1/4 4 #4 4-7/8 8-7/ /2-2-3/8 4-35/64 5-1/4 4 #5 6-1/8 10-1/ /8 5-15/64 5-3/4 4-1/2 #4 4-7/8 9-3/ /8 5-15/64 5-3/4 4-1/2 #5 6-1/8 10-5/ /2-3-3/8 5-25/32 6-5/16 5 #4 4-7/8 9-7/ /2-3-3/8 5-25/32 6-5/16 5 #5 6-1/8 11-1/8 F /8 6-13/ /2 #5 6-1/8 11-5/8 G /2-4-1/2 7-1/ /16 6 #5 6-1/8 12-1/ /2 8-7/ /16 7 #5 6-1/8 13-1/8 H /2 8-9/32 8-7/8 7 #6 8-9/ /16 Short Taper Shank Holder #300TS (Thru Shank oolant) Item Number 1 F lade iameter utting Range Ref. Ref. Flute Shank Overall oolant Inlet ia. iscontinued Item. This product will be available as a quoted special once current inventory is depleted. The series Holders are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 17 MT /8 3-7/ /32 3 #3 3-7/8 6-7/8 1/ /32-1-3/8 3-7/ /32 3 #3 3-7/8 6-7/8 1/ /4-1-3/4 4-1/ /32 3-1/2 #4 4-7/8 8-3/8 5/ /2 1-1/2-2-3/8-2-3/8 4-35/ /64 5-1/4 5-1/4 4 4 #4 #5 4-7/8 6-1/8 8-7/8 10-1/ /2-3-3/8 5-25/32 6-5/16 5 #5 6-1/8 11-1/8 3/8 F /8 6-13/ /2 #5 6-1/8 11-5/8 3/8 G /2-4-1/2 7-1/ /16 6 #5 6-1/8 12-1/8 3/ /8 5-15/64 5-3/4 4-1/2 #4 4-7/8 9-3/8 5/16 dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately 5/16 3/8

20 Short Taper Shank Holder #400SR (oolant) F G H Item Number 1 F G lade iameter utting Range Ref. Ref. Flute MT Shank Overall /32-1-3/8 5-3/ /32 3 #4 4-7/8 9-9/16 1/4 2T-4SR /4-1-3/4 5-23/32 6-1/32 3-1/2 #4 4-7/8 10-1/16 1/4 2T-4SR /2-2-3/8 6-15/ /16 4 #4 4-7/8 10-9/16 1/4 2T-4SR /8 6-59/64 7-7/16 4-1/2 #4 4-7/8 11-1/16 1/4 2T-4SR /2-3-3/8 8-3/32 8-5/8 5 #5 6-1/8 13-7/16 1/2 2T-6SR /8 8-23/32 9-5/16 5-1/2 #5 6-1/ /16 1/2 2T-6SR /2-4-1/2 9-11/ #5 6-1/8 14-7/16 1/2 2T-6SR / / /8 7 #5 6-1/8 15-7/16 1/2 2T-6SR Pipe Tap R Standard Taper Shank Holder #500SR (oolant) Item Number 1 F G lade iameter utting Range Ref. Ref. Flute MT Shank Overall /8 9-15/ /32 7-3/4 #4 4-7/8 14-5/16 1/4 2T-4SR /32-1-3/8 9-15/ /32 7-3/4 #4 4-7/8 14-5/16 1/4 2T-4SR /4-1-3/ / /32 8-1/8 #4 4-7/ /16 1/4 2T-4SR F G 1-1/2 1-1/ /8-2-3/8-2-7/8-2-7/ / / / / / / / /16 8-1/2 8-1/2 9 9 #4 #5 #4 #5 4-7/8 6-1/8 4-7/8 6-1/8 15-1/ / / /16 Pipe Tap 1/4 1/4 1/4 1/4 R 2T-4SR 2T-5SR 2T-4SR 2T-5SR /2-3-3/8 13-3/ /8 10 #5 6-1/8 18-7/16 1/2 2T-6SR / / / /2 #5 6-1/ /16 1/2 2T-6SR /2-4-1/ / #5 6-1/8 21-7/16 1/2 2T-6SR H /2-8-1/ / / /8 19-3/ #5 #6 6-1/8 8-9/ / /8 1/2 1/2 2T-6SR 2T-55SR dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately The series Holders are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:. 18 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

21 Long Taper Shank Holder #600 SR (oolant) Item Number 1 F G lade iameter utting Range Ref. Ref. Flute MT Shank Overall /8 17-3/ /32 15 #4 4-7/8 21-9/16 1/4 2T-4SR /32-1-3/8 17-3/ /32 15 #4 4-7/8 21-9/16 1/4 2T-4SR /4-1-3/4 17-7/ /32 15 #4 4-7/8 21-9/16 1/4 2T-4SR 1-1/2-2-3/ / /16 18 #4 4-7/8 24-9/16 1/4 2T-4SR 1-1/2-2-3/ / /16 18 #5 6-1/ /16 1/4 2T-5SR 2-2-7/ / /16 18 #4 4-7/8 24-9/16 1/4 2T-4SR 2-2-7/ / /16 18 #5 6-1/ /16 1/4 2T-5SR /2-3-3/8 23-3/ /8 20 #5 6-1/8 28-7/16 1/2 2T-6SR F /8 23-7/ /16 20 #5 6-1/8 28-7/16 1/2 2T-6SR /2-4-1/ / #5 6-1/8 32-7/16 1/2 2T-6SR G H / / /16 24 #6 8-9/ /8 1/2 2T-55SR Pipe Tap R xtra Long Taper Shank Holder #700 SR (oolant) Item Number 1 F G lade iameter utting Range Ref. Ref. Flute Shank Overall llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 19 MT /8 23-3/ /32 21 #4 4-7/8 27-9/16 1/4 2T-4SR /32-1-3/8 23-3/ /32 21 #4 4-7/8 27-9/16 1/4 2T-4SR /4-1-3/4 24-7/ /32 22 #4 4-7/8 28-9/16 1/4 2T-4SR /2-2-3/ / /16 26 #4 4-7/8 32-9/16 1/4 2T-4SR /2-2-3/ / /16 26 #5 6-1/ /16 1/4 2T-5SR /8-2-7/ / / / / #4 #5 4-7/8 6-1/ / /16 Pipe Tap 1/4 1/4 R 2T-4SR 2T-5SR /2-3-3/8 33-3/ /8 30 #5 6-1/8 38-7/16 1/2 2T-6SR F /8 36-7/ /16 33 #5 6-1/8 41-7/16 1/2 2T-6SR G /2-4-1/ / #5 6-1/8 45-7/16 1/2 2T-6SR H / / /16 40 #6 8-9/ /8 1/2 2T-55SR dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately The series Holders are no longer stocked items. Items listed are subject to prior sale. Suggested lternative:.

22 Short 50 NMT Shank Holder #300 (No oolant) See Note Item Number 1 lade iameter utting Range Ref. Ref. Flute NMT Shank Overall /4-1-3/4 5-13/ / /8 10-1/ /2-2-3/8 5-27/64 6-1/ /8 10-1/ /8 7-7/64 7-5/8 5-1/ /8 11-5/ /2-3-3/8 7-5/ /16 5-1/ /8 11-5/8 F /8 7-9/32 7-7/8 5-1/ /8 11-5/8 G /2-4-1/2 8-29/32 9-9/ /8 13-1/8 H /2 9-3/ / /8 13-1/8 Short 50 NMT Shank Holder #400 (oolant) See Note F G H Item Number 1 F lade iameter utting Range Ref. Ref. Flute NMT Shank Overall /4-1-3/4 7-3/ / / /16 2T-5SR 3/ /2-2-3/8 7-7/ / / /16 2T-5SR 3/ /8 9-27/ /16 5-1/ / /16 2T-55SR 3/ /2-3-3/8 9-15/ / / /16 2T-55SR 5/ /8 9-19/ /16 5-1/ / /16 2T-60SR 5/ /2-4-1/2 11-7/ / /8 15-7/16 2T-65SR 5/ / / /8 15-7/16 2T-65SR 5/8 R Inlet Hole dapter required for through H series High Performance Spade rills - see page 7 dapter sold separately ll NMT Shank Holders are discontinued items: Items listed are available, subject to prior sale, at list prices until stock is depleted. Once stock is depleted items are available as quoted specials only. 20 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

23 Standard 50 NMT Shank Holder #500 (oolant) See Note F G H Item Number 1 F lade iameter utting Range Ref. Ref. Flute Shank NMT Overall /4-1-3/ / /32 8-1/ /8 16-5/16 2T-5SR 3/ /2-2-3/ / /16 8-1/ /8 16-5/16 2T-5SR 3/ / / / / / /16 2T-55SR 3/ /2-3-3/ / / / /16 2T-55SR 5/ / / / / / /16 2T-60SR 5/ /2-4-1/2 19-7/ / /8 23-7/16 2T-65SR 5/ / / /8 23-7/16 2T-65SR 5/8 R Inlet Hole ll NMT Shank Holders are discontinued items: Items listed are available, subject to prior sale, at list prices until stock is depleted. Once stock is depleted items are available as quoted specials only. Note learance is provided for a quick change locknut so this product can be modified for those applications. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 21

24 ccessories & Features Grinding Fixture Item No Includes Vise and Top Mounting Plate (with all components). This fixture is used to regrind Style Spade rills. It comes assembled with a top mounting plate and three rotating joints for normal regrinding. n additional joint is included for special requirements. This device is used in conjuction with a surface grinder or tool and cutter grinder. The various joints can adjust for point clearance and radius lip grinding. The fixture is truly universal in that it can be used to grind many other types of tools by removing the Top Mounting Plate and using the mounting surface of the fixture for other tooling as required. Top Mounting Plate Item No Top Mounting Plate only. This plate is included as part of the Grinding Fixture. It is available separately for those that may already have a Grinding Fixture or may wish to adapt it to some other device. The plate comes complete with all the hardware required to locate and clamp any series Style Spade rill to the plate. ylindrical Grinding Fixtures Item Number iameter Range / /16 1-3/ /4 1-3/ /2 2-3/ / /2 3-3/8 F /8 G /2 4-1/2 H /2 Items included with ylindrical Grinding Fixture: (1) Set Screw, (1) Slip Pin. pplies to drills with a reference length of 3-11/16. ylindrical Grinding Fixtures for drills with a 4-11/16 reference length will be quoted upon request. 22 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

25 Non-rotating member of machine Spindle Stud assembled into R Hose Hose Fitting Rotary oolant dapter Thrust Washer Snap Ring lade Holder Stud to provide positive stop. ccessories & Features Sample application of a Rotary oolant dapter. Rotary oolant dapters and ccessories Item Number I.. O.. Thread for riving Rod Pipe Thread Repair Kits R O-Ring Replacement 2T-3SR 1 2-1/8 1-1/8 5/16 N 1/8 2T1-3SR 2T1-3OR-10 2T-4SR 1-1/4 2-1/2 1-3/8 3/8 N 1/4 2T1-4SR 2T1-4OR-10 Front and Side View 2T-5SR 1-3/ /8 3/8 N 1/4 2T1-5SR 2T1-5OR-10 2T-6SR 2-1/4 3-3/4 1-3/4 1/2 N 1/2 2T1-6SR 2T1-6OR-10 2T-55SR 2-1/ /4 1/2 N 1/2 2T1-55SR 2T1-55OR-10 2T-60SR 3 4-1/2 1-3/4 1/2 N 1/2 2T1-60SR 2T1-60OR-10 2T-65SR 3-3/4 5-1/2 1-3/4 1/2 N 1/2 2T1-65SR 2T1-65OR-10 Rotary oolant dapter comes complete with: (1) R, (2) O-Rings, (2) Snap Rings and (2) Thrust Washers. Repair Kit includes: (2) O-Rings, (2) Snap Rings and (2) Thrust Washers. Rotary oolant dapter O-Ring Replacement: 10 pieces per package. R xploded View lamping Screw dapter lamping Screw lade lade Holder lade-loc Screw Holder View #1 View #2 lade-loc rill Holders through H - U.S. Patent No. 3,667,768 lade-loc Screw The views above illustrate our lade-loc Feature and how it works with both Style and High Performance Spade rills. View #1 shows the lade-loc Screw making contact with a Style Spade rill. Tightening the lade-loc Screw helps align the spade drill while locking it in place. This protects against tool movement during the drilling cycle as well as when the tool is being retracted from the hole. The patented lade-loc Feature is standard in llied holders ( H ) and makes our product unique! View #2 shows how the lade-loc Screw is used with llied dapters. This feature secures the adapter to the holder so High Performance rills can be exchanged without any need to remove, clean and re-insert the adapter. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 23

26 Recommended Speeds and Feeds HIGH PRFORMN N UNIVRSL MTRIL Free Machining Steel 1118, 1215, 12L14, etc. Low arbon Steel 1010, 1020, 1025, 1522, 1144, etc. Medium arbon Steel 1030, 1040, 1050, 1527, 1140, 1151, etc. lloy Steel 4140, 5140, 8640, etc. High Strength lloy 4340, 4330V, 300M, etc. Structural Steel 36, 285, 516, etc. High Temp. lloy Hastelloy, Inconel 600, etc. Stainless Steel 303, 416, 420, 17-4 PH, etc. Tool Steel H-13, H-21, -4, 0-2, S-3, etc. luminum ast Iron MTRIL HRNSS (HN) TiN SFM TilN SFM High Performance Spade rills F (IPR) TiN SFM to 1-1/ /4 to llied Machine & ngineering orp. offers this slide chart item# SLR-98-1 to determine proper machine tool set-up parameters when using llied Spade rills and Holders. 2 to to SFM Uncoated Style Spade rills F (IPR) 1 to 1-1/ /4 to to to Formulas: IPM = (RPM) (IPR) SFM = (RPM) (3.14) (I) RPM = (SFM) (12) 12 (3.14) (I) Uncoated PM-T15 (obalt) or TiN coated PM-M4 HSS is recommended for extended tool life at the speeds and feeds shown. The speeds recommended for TilN coated tools are based on empirical data obtained under Optimum onditions. Many applications do not exhibit Optimum onditions, reductions in speed parameters may be required due to excessive tool wear generated in the application. The speeds and feeds listed above are considered a general starting point for all applications. Factory technical assistance is also available for your specific applications through our pplication ngineering Team. Please have item number, hole diameter, depth, material grade, HN hardness and coolant pressure information available when you call. dditional information such as part and machine rigidity, horsepower and thrust limits, vertical or horizontal spindle, revolving or stationary tool, flood or through holder coolant are also very helpful to our pplication ngineers. Multiply the uncoated universal speeds and feeds by 1.15 to 1.25, when using TiN oated rills, for material shown without an asterisk. This will achieve a 30% to 50% increase in your penetration rate (IPM feed). For additional information on horsepower and thrust please use M s Speed and Feed slide charts. WRNING: O NOT RUN UNOT HSS T TH OT SPS N FS SHOWN OV. 24 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

27 High Performance and Spade rills oolant Recommendations oolant Pressure (Psi) Material oolant Volumetric Flowrate (GPM) Hardness High Performance Uncoated MTRIL (HN) 1-1-1/4 1-1/ /4 1-1/ Free Machining Steel , 1215, 12L14, etc Low arbon Steel , 1020, 1025, 1522, 1144, etc Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc lloy Steel , 5140, 8640, etc High Strength lloy , 4330V, 300M, etc Structural Steel , 285, 516, etc High Temp. lloy Hastelloy, Inconel 600, etc Stainless Steel , 316, 330, 17-4 PH, etc Tool Steel H-13, H-21, -4, 0-2, S-3, etc luminum ast Iron The coolant pressure and flow rate recommendation above represents a good approximation to obtain optimum tool life and chip evacuation at M recommended speeds and feeds. For a more specific approximation of coolant requirements, consult the formulization below or the M ngineering epartment. lthough the above pressure and flow recommendations produce attractive tool life and chip evacuation, the and rilling Systems will still function quite adequately if lower coolant capabilities exist. all our ngineering epartment for specific recommendations. OOLNT LULTIONS The proper coolant pressure and volume are critical to the successful application of the and product lines. The following equations will aid you in estimating the coolant parameters for the and drilling systems. The volume of coolant that can pass through a holder per minute is fixed by the pressure of the coolant at the inlet to the holder. The relation between coolant volume and coolant pressure is estimated by: V c = oolant Volume Through the Tool in Gal/Min x = Holder orrection Factor Psi = Inlet oolant Pressure in Psi How much coolant pressure is needed in a given application is based upon the thermal conductivity of the material being machined and the material removal rate in cubic inches per minute. The material removal rate is calculated by the equation: MRR = 0.78 IPM ia 2 MRR = Material Removal Rate in ubic inches per minute. IPM = Inches per minute penetration rate. ia. = rill iameter in inches. The coolant pressure is then given by the equation: M V c = x 13.8 Psi 1 Psi MRR M 2 = x = Material orrection xtended Holders dditional coolant pressure is required when using long and extra long length holders because of pressure losses in the holder and because higher coolant volumes are required to evacuate the chips at the deeper drill depths. Use the given equations to find the estimated coolant pressure and then multiply this value by 1.30 for long length or 1.50 for extra long length to find the recommended coolant pressure to be used with these extended length holders. Finally, these equations are based on an engineering model of fluid flow and will only give an estimate of the pressure and volume needed to make your application work effectively. If you have any questions regarding your or drilling system application please contact the ngineering epartment of llied Machine & ngineering orp. xample #1 n series style drill is being used on a 15 N lathe with a coolant pump that will produce 70 Psi and 15 Gal/Min. How much coolant will pass through the Style rill Holder? V c = x 13.8 Psi V c = = 5.16 Gal/Min xample #2 n series drill insert is being used on a 15 N lathe with a coolant pump that will produce 70 Psi and 15 Gal/Min. 1 diameter hole is being placed in 4140 material at 175 to 225 HN. What coolant pressure should be used to run the drill insert at recommended speeds and feeds? an the coolant pump on the machine supply the calculated pressure? 140 SFPM and 0 IPR is the recommended speed and feed for this application. This equates to a penetration rate of 7.49 IPM. MRR = 0.78 IPM ia 2 = = 5.84 ubic Inches/Min. The coolant pressure is then given by: Psi = 1 MRR M x = = 63.9 Psi From example #1 you can see that the pump can force 5.16 Gal/Min. of coolant through the tool. Water ased oolants Only Holder orrection Value, x =.166 x =.387 x =.559 x =.959 x = F x = G, H x = Material orrection Material Value Steel M = 0.7 Stainless M = 1.5 High Temp. lloys M = 3.0 luminum M = 0.25 ast Iron M = 0.4 Titanium M = 6.0 llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 25

28 Regrind harts Style Flat ottom Notes: 1. Maintain cutting edges of the tool within.001 T.I.R. Notes: 1. Grind cutting edge.005 above center line at the center of new tool. 2. Maintain flatness and height across the cutting edges of the tool within.001 T.I.R. lade Thickness Style Spade rills Size Range F G Size Range Flat ottom Spade rills F G H 1/ / / / /64-1/ /16 1/8 3/16 31/32-1-3/ /4 3 31/32-1-1/ /64-1/ /16 1/8 9/32 1-1/4-1-3/ / /4-1-1/ /64-1/ /2 1/8 5/16 1-1/2-2-3/ / / /32-3/ /8 1/8 3/ / / / /32-3/ /8 3/16 7/16 2-1/2-3-3/ / / /32-1/ /8 3/16 F 1/ / / / /32-1/ /4 1/4 G 5/8 3-1/2-4-1/ / / /32-1/ /2 1/4 H 1 H 2 11/ / /32-1/ /2 1/4 H 3 11/16 5-1/8-5-1/ / H 4 H 9 11/16 5-5/8-8-1/ / llied Machine & ngineering orp. High Performance and Style Spade rills and Holders

29 Warranty Warranty & Ordering Information llied Machine & ngineering orp. warrants to original equipment manufacturers, distributors, industrial and commercial users of its products, that each new product manufactured or supplied by llied Machine shall be free from defects in material and workmanship. llied s obligation under this warranty is limited to furnishing without additional charge a replacement or, at its option repairing or issuing credit for any product which shall within one year from the date of sale be returned freight prepaid to the plant designated by an llied representative and which upon inspection is determined by llied to be defective in materials or workmanship. omplete information as to operating conditions, machine setup, and application of cutting fluid should accompany any product returned for inspection. The provisions of this warranty shall not apply to any llied product which has been subjected to mis-use, improper operating conditions, machine setup or application of cutting fluid or which has been repaired or altered if such repair or alteration in the judgement of llied would adversely affect performance of the product. THIS WRRNTY IS IN LIU OF LL OTHR WRRNTIS, XPRSS OR IMPLI, INLUING NY IMPLI WRRNTY OF MRHNTILITY OR FITNSS FOR PRTIULR PURPOS. llied shall have no liability or responsibility on any claim of any kind, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. IN NO VNT SHLL LLI MHIN & NGINRING ORP. LIL FOR NY SPIL ININTL OR ONSQUNTIL MGS. llied makes no other warranty, express or implied, except as set forth above, and llied neither assumes nor authorizes any other person or entity to assume for it any other obligation or liability in connection with any of its products. LL PRIS, SIGNS, LIVRIS N MTRILS SUJT TO HNG WITHOUT NOTI. Ordering Instructions ll orders are processed through llied s computerized order entry and invoicing system. Please specify the correct item number as well as a full description of the desired item(s) so we can process your order accurately and efficiently. Incorrect item numbers and/or descriptions will cause unnecessary delays and returns that are subject to a 10% restocking charge. Your assistance is critical if we are to achieve our goal of processing orders and shipping in stock items within 24 hours. WRNING utting tools, tooling and metalworking machines may fail during use. Use safety glasses, appropriate safety equipment and exercise personal safety at all times while operating machinery. llied Machine & ngineering orp. High Performance and Style Spade rills and Holders 27

30

GEN2 T-A Drill Inserts

GEN2 T-A Drill Inserts RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert

More information

Boring. Reaming. Burnishing. Threading. Drilling ASC 320. High Penetration Solid Carbide Solutions. Specials

Boring. Reaming. Burnishing. Threading. Drilling ASC 320. High Penetration Solid Carbide Solutions. Specials oring Reaming urnishing Threading rilling S 320 High Penetration Solid arbide Solutions Specials S 320 High Penetration Solid arbide rilling System iameter Range: 3.00mm - 20.00mm (0.1181-0.7874 ) eyond

More information

Boring. Reaming. Burnishing. Threading ASC 320 DRILLING. High Penetration Solid Carbide Drills. Specials

Boring. Reaming. Burnishing. Threading ASC 320 DRILLING. High Penetration Solid Carbide Drills. Specials oring Reaming urnishing Threading S 320 High Penetration Solid arbide rills Specials The Foundation Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions to

More information

Boring. Reaming. Burnishing. Threading. Revolution Drill DRILLING. Indexable Insert Drilling System. Specials

Boring. Reaming. Burnishing. Threading. Revolution Drill DRILLING. Indexable Insert Drilling System. Specials oring Reaming urnishing Threading Revolution rill Indexable Insert rilling System Specials The Foundation Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions

More information

P: F:

P: F: TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either

More information

DRILL INSERTS & HOLDERS

DRILL INSERTS & HOLDERS DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts

More information

Specializing In High Performance Solid Carbide Cutting Tools

Specializing In High Performance Solid Carbide Cutting Tools Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for

More information

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance

More information

Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS

Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating

More information

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173 T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,

More information

COOLANT-FED TOOLING & SYSTEMS

COOLANT-FED TOOLING & SYSTEMS V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL

More information

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid

More information

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips

More information

No. of Holes. Drill Dia. (in.)

No. of Holes. Drill Dia. (in.) UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast

More information

Body Length (mm) New Tool Ref Length (mm)

Body Length (mm) New Tool Ref Length (mm) 3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *

More information

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide

More information

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck

More information

Table of Contents. Standard Taps

Table of Contents. Standard Taps Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw

More information

5/6 and 7/8 Series T-A Holders

5/6 and 7/8 Series T-A Holders 5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296

More information

ANGLE HEADS ADDING MORE AXES WITH MST CATALOG 517-2

ANGLE HEADS ADDING MORE AXES WITH MST CATALOG 517-2 TLOG 57-2 NGL HS ING MOR XS WITH MST MRIN ROTRY TOOLS O. 250 West uarte Rd, Ste., Monrovia, US 906-7464 Tel: + (626) 58-8466 ax: + (626) 58-0076 mail: info@artcotools.com Website: www.artcotools.com MST

More information

Boring. Reaming. Burnishing. Threading. Drilling. BT-A Drill. BTA-STS (Single Tube System) Machining. Specials

Boring. Reaming. Burnishing. Threading. Drilling. BT-A Drill. BTA-STS (Single Tube System) Machining. Specials oring Reaming urnishing Threading rilling T- rill T-STS (Single System) Machining Specials T- rill T (STS) eep Hole Machining System iameter Range: 12.95mm - 47.80mm (0.5100-1.8820 ) Material jection with

More information

2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!

2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES! 2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS

More information

Special Product Catalogue. T-A Drill Insert System

Special Product Catalogue. T-A Drill Insert System Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than

More information

Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified

Solid Carbide Tools. Drilling Solutions. New Expanded Offering.   ISO 9001 Certified Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

Fittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)

Fittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar) ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full

More information

COLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet

COLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet OET HOER M/ TOO OET HOER Ultra precision taper collet chuck The best-suited base holder applicable to all the kinds of machining This holder meets all the requirements for high-speed cutting; Accuracy,

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting

More information

Drills Manufactured to National Aerospace Standards (NAS)

Drills Manufactured to National Aerospace Standards (NAS) Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life

More information

DEEP GROOVING. insert height A 6.35 B 8.43 chipbreaker. corner radius Metric Description EDP Code W R L H A

DEEP GROOVING. insert height A 6.35 B 8.43 chipbreaker. corner radius Metric Description EDP Code W R L H A Deep Grooving Insert Nomenclature hart VDG 318 M 20 vee-bottom deep grooving insert height 6.35 8.43 chipbreaker groove width Metric 3,18 3,96 4,78 5,54 6,35 7,92 9,53 metric corner radius Metric 0.20

More information

Section VIII Hydraulic Tooling

Section VIII Hydraulic Tooling Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS

More information

PYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE

PYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438

More information

Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.

Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The

More information

TAPER AND DEBURRING COUNTERSINKERS

TAPER AND DEBURRING COUNTERSINKERS TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because

More information

Special Product Catalogue. T-A Drill Insert System

Special Product Catalogue. T-A Drill Insert System Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket

More information

NEW from Osborn...ATB Ceramic Filament

NEW from Osborn...ATB Ceramic Filament NEW from Osborn...ATB Ceramic Filament About Osborn Since Osborn s inception in 1887, success has always been about ensuring that you finish first. Whether it was last century, last week or in the last

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly

SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies

More information

insert height A.250 B.337 chipbreaker corner radius Inch Metric.008 0, , , ,8 w Description EDP Code Inch Metric R L H A

insert height A.250 B.337 chipbreaker corner radius Inch Metric.008 0, , , ,8 w Description EDP Code Inch Metric R L H A Deep Grooving Insert Nomenclature hart VDG 125 008 vee-bottom deep grooving insert height.250.337 chipbreaker GOOVING groove idth Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53

More information

Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number

Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number *Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose

More information

NIAGARA CUTTER THREAD MILLING THREAD MILLS

NIAGARA CUTTER THREAD MILLING THREAD MILLS NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD

More information

SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.

SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO. Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity

More information

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry

More information

New Tool Ref Length (mm) Body Length (mm)

New Tool Ref Length (mm) Body Length (mm) 4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill

More information

Taps, Dies & Threading

Taps, Dies & Threading Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875

More information

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting

More information

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable

More information

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity

Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting

More information

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in. Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.

More information

EFFICIENT OPTIMIZED ROUGHING NIAGARA CUTTER MULTI FLUTE SOLID CARBIDE END MILLS

EFFICIENT OPTIMIZED ROUGHING NIAGARA CUTTER MULTI FLUTE SOLID CARBIDE END MILLS FFICINT OPTIMIZD ROUGHING NIAGARA CUTTR MULTI FLUT SOLID CARBID ND MILLS UNSURPASSD CHIP CONTROL A NW LVL OF PRFORMANC The Niagara Cutter Multi Flute family of products is taking Optimized Roughing to

More information

In-Line Positive Feed Tools

In-Line Positive Feed Tools In-Line Positive Feed Tools ADVANCED DRILLING EQUIPMENT SP-1300-1-EN-0806-.25M 1-1 Introduction In-Line Positive Feed Tools How Positive Feed Drills Operate Our in-line positive feed drills use two interconnected

More information

ELD Series - DC Motor Drive

ELD Series - DC Motor Drive ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended

More information

Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation

Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11

More information

Peck Feed Drills ADVANCED DRILLING EQUIPMENT 3-1 SP EN M

Peck Feed Drills ADVANCED DRILLING EQUIPMENT 3-1 SP EN M Peck Feed Drills ADVANCED DRILLING EQUIPMENT SP-1300-3-EN-0806-.25M 3-1 Introduction Peck Feed Drills Our peck feed drills are a unique category unto themselves. These drills drill a short distance, then

More information

LATHE TOOLHOLDER BUSHINGS

LATHE TOOLHOLDER BUSHINGS HUK JWS LTH WORKHOLING MHIN VISS VIS JWS RTNTION KNOS R,, TG OLLTS TOOLHOLRS TP HOLRS INXL RILLS TURNING & ORING NMILLS, RILLS TPS & RMRS RSIVS MSURING TOOLS MRO & STY LT STOK/RILL RO LTH TOOLHOLR USHINGS

More information

COATING SELECTION CHART

COATING SELECTION CHART On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,

More information

FC SERIES CUT OFF. Neutral. Competitor Description EDP Code Nomenclature Insert Width A Hand

FC SERIES CUT OFF. Neutral. Competitor Description EDP Code Nomenclature Insert Width A Hand SEIES INSET SEIES UT O eft Hand ead ngle Toolholders listed below ompetitor Description EDP ode Nomenclature Insert idth Hand 36 GP26 GP530 26 3 530-094-N 094N 507-140 3/32 (.094) 0 N -094--4 0944 507-144

More information

Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l

Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation Major Components Figure l Basic Operation: High pressure coolant enters the Titespot Angle Head and drives an integral

More information

Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available

Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine

More information

Industrial Lifting Equipment

Industrial Lifting Equipment Industrial Lifting quipment Trolley and Tractor Selection Guide 1/2 20 metric ton Lifting apacity Ingersoll-Rand offers a wide variety of plain, geared or powered trolleys for use with the MLK and HLK

More information

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page... group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet

More information

Section 6 Feet & Casters

Section 6 Feet & Casters atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30

More information

DIAMOND & CBN WHEELS. Diamond & CBN Grinding Wheels SUPER ABRASIVES TYPICAL APPLICATIONS NORTON DIAMOND & CBN WHEELS

DIAMOND & CBN WHEELS. Diamond & CBN Grinding Wheels SUPER ABRASIVES TYPICAL APPLICATIONS NORTON DIAMOND & CBN WHEELS Diamond & CBN Wheels Diamond and CBN (Cubic Boron Nitride) grinding wheels are available in a wide range of Resin, Vitrified and Metal bonds. Diamond and CBN wheels are designed to grind very hard materials

More information

Special drills 88 PRECISION TOOLS

Special drills 88 PRECISION TOOLS SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

More information

member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162

member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162 Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage

More information

8 to 10 threads chamfered for easy thread starting in tough material.

8 to 10 threads chamfered for easy thread starting in tough material. TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is

More information

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. 4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2

More information

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20

More information

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories 1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

Carbide Drills When productivity matters - Stub 1. to Long 1

Carbide Drills When productivity matters - Stub 1. to Long 1 CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill

More information

Minimum Investment for Maximum Performance Linear Guide Ways

Minimum Investment for Maximum Performance Linear Guide Ways ounded in 197, Pinnacle is specialized in manufacturing all kinds of machining centers with excellent experience in technology, quality and service. Pinnacle machining centers range from 5-axis, double

More information

Coromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53

Coromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53 Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal

More information

Supplying All Your Needs for Vacuum Cups, Grippers, Seals and Rollers

Supplying All Your Needs for Vacuum Cups, Grippers, Seals and Rollers Supplying ll Your Needs for Vacuum ups, Grippers, Seals and Rollers VI-S MNUTURING has been committed for over twenty-five years to serving our customers with the finest quality products at the best possible

More information

Vertical Multi-stage Pumps - 60 Hz.

Vertical Multi-stage Pumps - 60 Hz. P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX

More information

ELD Series - DC Motor Drive

ELD Series - DC Motor Drive ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended

More information

The Industrial Choice. Model PB. Belt Driven. Model PB Direct Drive PRESSURE BLOWER. Model PB

The Industrial Choice. Model PB. Belt Driven. Model PB Direct Drive PRESSURE BLOWER. Model PB The Industrial hoice. Model P elt Driven Model P Direct Drive PRESSURE LOWER Model P ULLETIN 904 March 999 Model P Pressure lowers Pressure blowers provide medium pressure air for cooling, ventilating

More information

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P: PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

Collet Chucks and Collets

Collet Chucks and Collets ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16

More information

Holemaking ADVANCES 2017 Inch

Holemaking ADVANCES 2017 Inch Holemaking ADVANCES 2017 Inch Holemaking Introduction... Q1 Q8 Solid Carbide Drills... R1 R139 Modular Drills...S1 S51 Indexable Drills... T1 T60 Hole Finishing... U1 U95 Q1 Holemaking Made Easy and Economical

More information

CTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet

CTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet SK-T ing Systems for Turning Mill M/ OET OER ANGE EA OET OER Taper collet chuck The optimum holder choices for a variety of applications TA General Purpose coolant-through oolant- Through utter SUKIMA

More information

SHARP SVL-3320 & 4020 LINEAR WAY VERTICAL MACHINING CENTER

SHARP SVL-3320 & 4020 LINEAR WAY VERTICAL MACHINING CENTER SHRP SVL-3320 & 4020 LINR WY VRTIL MHINING NTR PRISION MHIN TOOLS Sharp Industries, Inc. 3501 hallenger Street Torrance, 90503 Tel 310-370-5990 Fax 310-542-6162 mail: info@sharp-industries.com Parts: parts@sharp-industries.com

More information

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent ) SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the

More information

Cut cooler, faster and longer. only the best

Cut cooler, faster and longer. only the best Cut cooler, faster and longer only the best To drill more holes faster! Innovation is part of our daily activity and as a result most of our drill bits present unique features and benefits that will help

More information

P&N/SUTTON. A trusted name, serving Canadian industries since

P&N/SUTTON. A trusted name, serving Canadian industries since /SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

PRODUCT CATALOG MAIN INDEX

PRODUCT CATALOG MAIN INDEX PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre

More information

G Rotary Unions. For coolant, water, oil and air service. High speed rotating unions for transferring fluids and air.

G Rotary Unions. For coolant, water, oil and air service. High speed rotating unions for transferring fluids and air. G Rotary Unions or coolant, water, oil and air service Precision rotary unions for more effective cooling and lubrication. High speed rotating unions for transferring fluids and air. ontents Type G Rotary

More information

Cord Connectors AMERICAN FITTINGS. Corporation. Specification Grade Alloy Steel, Aluminum, Stainless Made in the USA

Cord Connectors AMERICAN FITTINGS. Corporation. Specification Grade Alloy Steel, Aluminum, Stainless Made in the USA ord onnectors Specification Grade lloy Steel, luminum, Stainless Made in the US Why ren t Your ables Wearing the EST? STOP USING OUTTE OR ONNETORS N ONNET WITH THE EST! MFIO SPE-grade Strain Relief ord

More information

Revolutionary High Speed Technology

Revolutionary High Speed Technology Revolutionary High Speed Technology Power, Precision and Reliability at 25,000-90,000 rpm to 1.60 hp +1.561.994.0500 www.airturbinetools.com info@airturbinetools.com HIGH SP SPINLS re Your Machine Spindle

More information

MFH-RAPT R High Feed Milling Cutter

MFH-RAPT R High Feed Milling Cutter MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase

More information

Gaugeable Tube Fittings and Adapter Fittings

Gaugeable Tube Fittings and Adapter Fittings www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of

More information

Automatic Machining Tools

Automatic Machining Tools Automatic Machining Tools ARO AMT Catalog_new_BW.qxd:20001893 Catalog 9/17/07 6:15 PM Page 1 Table of Contents Numerical Model Index...2 Tool Selection...4 ARO Automatic Machining Tools...5 Electric/Pneumatic

More information

PTTC Tube Cutter (Push Type Tube Cutter)

PTTC Tube Cutter (Push Type Tube Cutter) PTTC Tube Cutter (Push Type Tube Cutter) For Tube OD Range 3/8 and 5/8-2-1/2 Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com

More information