CA14 Effective May 2017

Transcription

1 TM CA14 Effective May 2017

2 TM ARTICULATED PISTONS Forged Steel Head = tighter sealing. Machined, cast aluminum skirts = lighter weight, thermodynamic superiority. Manganese Phosphate coated Piston Crowns for improved start up & break-in Specially designed for high load or severe duty conditions. Due to the demanding nature of commercial and industrial diesel applications, our industry standard demands durable material, state of the art technology, and highest quality precision manufacturing. AFA, from the outset, determined that these three factors would drive every aspect of the company s operations. The ultimate test of our parts is NOT sales volume or lowest price, it is performance in the field. PISTON RINGS Application specific materials for superior durability. Plasma coatings to reduce scuffing and provide additional break-in protection. Emissions and durability compliant. Additional special coatings for corrosion resistance and high-heat reduction. ALUMINUM PISTONS: CAD/CAM engineering and production. Metallurgically bonded NI-resist ring inserts. Fully Bushed pin bores where called for. Anodized or bonded Graphite coating where necessary for improved durability. BEARINGS Alloys equal or superior to original equipment materials. Computer-aided-manufacturing for exact tolerances. Application engineered for each engine. Continuous quality control. VALVETRAIN COMPONENTS: Total System engineered. Precise metallurgy and heat treating for specific applications. State-of-the-art manufacturing. Highest quality materials specified for each and every part.

3 TABLE OF CONTENTS Page(s) CUMMINS NATURAL GAS ENGINES B5.9G/ G6BT5.9/ G/ GTA5.9 Engines 1-6 GTA8.3/ C8.3G Engines 7-10 L10G/ GLTA-10 Engines GSL 8.9L Engines G12/ GTA12 Engines GTA14/ GNTA14-C Engines G743 Engines G855 - SMALL CAM Engines G855 - BI G CAM Engines G19/ GTA19/ KTAGC19 Engines CATERPILLAR NATURAL GAS ENGINES G3304/ G3306 Engine Kit I dentification by Serial Number 45 Caterpillar Engines Table of Contents 46 G3304/ G3306 Engines G3406 Engines AFA Warranty Policy

4 Cummins B5.9G/G6BT5.9/G/GTA5.9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Part No. Description QTY IN-FRAME & COMPLETE OVERHAUL KITS IF BF IF BM IF BF IF BM IF BF IF BM OH BF OH BM OH BF OH BM OH BF OH BM IN-FRAME OVERHAUL KIT - FRACTURE SPLIT RODS - STD /En marco el kit de reacondicionamiento - FRACTURA SPLIT VARILLAS - STD 1 IN-FRAME OVERHAUL KIT - MACHINE SPLIT RODS - STD/En marco el kit de reacondicionamiento - BARRAS DE LA MÁQUINA SPLIT - STD 1 IN-FRAME OVERHAUL KIT - FRACTURE SPLIT RODS -.50mm/En marco el kit de reacondicionamiento - FRACTURA SPLIT VARILLAS -.50mm 1 IN-FRAME OVERHAUL KIT - MACHINE SPLIT RODS -.50mm/En marco el kit de reacondicionamiento - BARRAS DE LA MÁQUINA SPLIT -.50mm 1 IN-FRAME OVERHAUL KIT - FRACTURE SPLIT RODS mm/En marco el kit de reacondicionamiento - FRACTURA SPLIT VARILLAS mm 1 IN-FRAME OVERHAUL KIT - MACHINE SPLIT RODS mm/En marco el kit de reacondicionamiento - BARRAS DE LA MÁQUINA SPLIT mm 1 COMPLETE OVERHAUL KIT - FRACTURE SPLIT RODS - STD/KIT COMPLETO DE REVISION - FRACTURA SPLIT VARILLAS -STD 1 COMPLETE OVERHAUL KIT - MACHINE SPLIT RODS - STD/KIT COMPLETO DE REVISION - VARILLAS DE LA MÁQUINA SPLIT - STD 1 COMPLETE OVERHAUL KIT - FRACTURE SPLIT RODS -.50mm/KIT COMPLETO DE REVISION - FRACTURA SPLIT VARILLAS -.50mm 1 COMPLETE OVERHAUL KIT - MACHINE SPLIT RODS -.50mm/KIT COMPLETO DE REVISION - VARILLAS DE LA MÁQUINA SPLIT -.50mm 1 COMPLETE OVERHAUL KIT - FRACTURE SPLIT RODS mm/KIT COMPLETO DE REVISION - FRACTURA SPLIT VARILLAS -1.00mm 1 COMPLETE OVERHAUL KIT - MACHINE SPLIT RODS mm/KIT COMPLETO DE REVISION - VARILLAS DE LA MÁQUINA SPLIT mm 1 CYLINDER BLOCK & COMPONENTS A Piston w/retainers & Rings (STD)/Pistón w/anillos y retenedores(std) 6 A WP Piston w/pin, Retainers & Rings/Pistón w / Pin, retenedores y anillos 6 A Piston w/retainers & Rings (.50mm)/Pistón w/anillos y retenedores(.50mm) 6 A Piston w/retainers & Rings (1.00mm)/Pistón w/anillos y retenedores(1.00mm) 6 A Ring Set, Single Cylinder - STD/Sistema del anillo, de un solo cilindro - STD 6 A Ring Set, Single Cylinder -.50mm/Sistema del anillo, de un solo cilindro -.50mm 6 A Ring Set, Single Cylinder mm/Sistema del anillo, de un solo cilindro mm 6 A Piston Pin/Perno Pistón 6 A Piston Pin Retainers/Perno Pistón Retenedores 12 A Cylinder Block Salvage Sleeve/Bloque de cilindros manga Salvage AR Expansion Plug Kit - Non-Storm Blocks/La expansión Plug Kit - Bloques para no AFA209 tormenta 1 AFA209ST Expansion Plug Kit - Storm Blocks/La expansión Plug Kit - Bloques de tormenta 1 A Camshaft Bearing/Teniendo árbol de levas - Up to S/N A Camshaft Bearing/Teniendo árbol de levas - After S/N

5 Cummins B5.9G/G6BT5.9/G/GTA5.9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Part No. Description QTY CONNECTING ROD & COMPONENTS A Connecting rod bearing (STD)/Cojinete de Biela (STD)(Machine Split Rod) 12 A Connecting rod bearing (.25mm)/Cojinete de Biela (.25mm)(Machine Split Rod) 12 A Connecting rod bearing (.50mm)/Cojinete de Biela (.50mm)(Machine Split Rod) 12 A Connecting rod bearing (.75mm)/Cojinete de Biela (.75mm)(Machine Split Rod) 12 A Connecting rod bearing (1.00mm)/Cojinete de Biela (1.00mm)(Machine Split Rod) 12 A Connecting rod bearing (STD)/Cojinete de Biela (STD)(UPPER - Fracture Split Rod) 6 A Connecting rod bearing (STD)/Cojinete de Biela (STD)(LOWER - Fracture Split Rod) 6 A Connecting rod bearing (.25mm)/Cojinete de Biela (.25mm)(UPPER - Fracture Split Rod) 6 A Connecting rod bearing (.25mm)/Cojinete de Biela (.25mm)(LOWER - Fracture Split Rod) 6 A Connecting rod bearing (.50mm)/Cojinete de Biela (.50mm)(UPPER - Fracture Split Rod) 6 A Connecting rod bearing (.50mm)/Cojinete de Biela (.50mm)(LOWER - Fracture Split Rod) 6 A Connecting rod bearing (.75mm)/Cojinete de Biela (.75mm)(UPPER - Fracture Split Rod) 6 A Connecting rod bearing (.75mm)/Cojinete de Biela (.75mm)(LOWER - Fracture Split Rod) 6 A Connecting rod bearing (1.00mm)/Cojinete de Biela (1.00mm)(UPPER - Fracture Split Rod) 6 A Connecting rod bearing (1.00mm)/Cojinete de Biela (1.00mm)(LOWER - Fracture Split Rod) 6 A Piston Pin Bushing/Buje de Biela 6 A Connecting Rod - Machine Split/Biela - Split Máquina 6 A Connecting Rod - Fracture Split/Biela - Fractura de Split 6 A Connecting Rod Bolt/Tornillo de Biela - MACHINE SPLIT RODS ONLY 12 A Connecting Rod Bolt/Tornillo de Biela - FRACTURE SPLIT RODS ONLY 12 CRANKSHAFT & COMPONENTS A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.25mm)/Principal Conjunto de cojinete (.25mm) 1 A Main Bearing Set (.50mm)/Principal Conjunto de cojinete (.50mm) 1 A Main Bearing Set (.75mm)/Principal Conjunto de cojinete (.75mm) 1 A Main Bearing Set (1.00mm)/Principal Conjunto de cojinete (1.00mm) 1 A Crankshaft w/o Gear/Cigüeñal w / o engranaje 1 A Crankshaft Gear/Rueda dentada, cigüeñal 1 A Vibration Damper/Amortiguador de vibraciones 1 2

6 Cummins B5.9G/G6BT5.9/G/GTA5.9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Part No. Description QTY CRANKSHAFT & COMPONENTS (cont.) A Front Crankshaft Seal - STD (can be used with repair sleeve)/frente Cigüeñal Sello - STD (se puede utilizar con el manguito de reparación) 1 A Front Crankshaft Seal - OS (repair sleeve included)/frente Cigüeñal Sello - OS (manguito de reparación incluido) 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A Rear Crankshaft Seal - STD (can be used with repair sleeve)/trasera del cigüeñal Sello - STD (se puede utilizar con el manguito de reparación) 1 A Rear Crankshaft Seal - STD (Double Lip for WET Housings)/Trasera del cigüeñal Sello - STD (Labio doble para WET Alojamientos) 1 A Rear Crankshaft Seal - OS (repair sleeve included)/trasera del cigüeñal Sello - OS (manguito de reparación incluido) 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 CAMSHAFT & LIFTERS A Camshaft w/o Gear/Árbol de levas W/O Gear 1 A Rear Camshaft Expansion Plug/Árbol de levas posterior taco de expansión 1 A Lifter/Levantador 12 A Push Rod/Barra de empuje 12 A Push Rod Cover Gasket/Barra de empuje junta de la tapa 1 A Push Rod Cover Grommet/Barra de empuje de la cubierta del ojal 6 3

7 Cummins B5.9G/G6BT5.9/G/GTA5.9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Part No. Description QTY CYLINDER HEAD COMPONENTS B5.9G & G6BT5.9 Engines A Intake Valve Kit /Kit de Válvula Admisión 6 A Exhaust Valve Kit /Kit de Válvula Escape 6 A Valve Seat - Intake/Asiento de la válvula - Ingesta 6 A Valve Seat - Exhaust/Asiento de la válvula - Escape 6 A Valve Keeper/Válvula Guardián 24 A Valve Spring - Intake & Exhaust/Válvula de primavera - Admisión y Escape 12 A Valve Spring Retainer - Intake & Exhaust/Válvula de retención de primavera - Admisión y Escape 12 A Valve Stem Seal - Intake & Exhaust/Sello del vástago de la válvula - Admisión y Escape 12 A Cylinder Head Bolt/Tornillos de culata - M12 X 1.75 X 70 6 A Cylinder Head Bolt/Tornillos de culata - M12 X 1.75 X A Cylinder Head Bolt/Tornillos de culata - M12 X 1.75 X A Expansion Plug - (Stainless Steel)(0.822")/Taco de Expansión (Acero inoxidable) (0,822 ") 5 A Rocker Cover Bolt Isolator O-Ring/Rocker cubierta de perno aislador O -Ring 6 A Rocker Cover Bolt Seal/Sello de cubierta de perno del eje de balancín 6 A Valve Cover Gasket - Gray/Junta de la tapa de la válvula - Gris 6 CYLINDER HEAD COMPONENTS G/GTA5.9 Engines A Intake Valve Kit /Kit de Válvula Admisión 6 A Exhaust Valve Kit /Kit de Válvula Escape 6 A Valve Seal - Intake/Sello de la válvula - Admisión 6 A Valve Seal - Exhaust/Sello de la válvula - Escape 6 A Valve Stem Seal - Intake/Sello del vástago de la válvula - Admisión 6 A Valve Keeper/Válvula Guardián 24 A Valve Spring - Intake & Exhaust/Válvula de primavera - Admisión y Escape 12 A Cylinder Head Bolt/Tornillos de culata - M12 X 1.75 X 70 6 A Cylinder Head Bolt/Tornillos de culata - M12 X 1.75 X A Cylinder Head Bolt/Tornillos de culata - M12 X 1.75 X A Expansion Plug - (Stainless Steel)(0.822")/Taco de Expansión (Acero inoxidable) (0,822 ") 5 A Rocker Cover Bolt Isolator O-Ring/Rocker cubierta de perno aislador O -Ring 6 A Rocker Cover Bolt Seal/Sello de cubierta de perno del eje de balancín 6 A Valve Cover Gasket - Gray/Junta de la tapa de la válvula - Gris 6 4

8 Cummins B5.9G/G6BT5.9/G/GTA5.9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Part No. Description QTY OIL PUMP & COMPONENTS A Oil Pump Assy./Bomba de aceite 1 Oil Press. Reg. Plunger - Low Pressure/Prensa de aceite. Reg. El émbolo - Baja A Presión 1 A Oil Cooler Core/Enfriador de aceite de Núcleo 1 A Filter Head Gasket/La Junta del filtro (Industrial applications) 1 A Filter Head Gasket/La Junta del filtro (Automotive applications) 1 A Oil Pan Gasket /Junta de Cárter 1 A Pick-up Tube Gasket/Pick-up junta de estanqueidad 1 WATER PUMP & COOLING COMPONENTS A Water Pump - Heavy Duty/Bomba de agua - Tarea pesada 1 A Water Pump Seal Ring/Anillo de sello de la bomba de agua 1 Thermostat Kit Degree (incl. thermostat and seal)/termostato Kit grados A (incl termostato y el sello.) 1 A Thermostat Seal - Rectangular Seal/Termostato Seal - Seal rectangular 1 A Belt Tensioner/Tensor de correa 1 A V Belt - 55 inch/v Belt - 55 pulgadas 1 A V Belt - 59 inch/v Belt - 59 pulgadas 1 TURBOCHARGER PARTS & REPAIR KITS A Turbocharger Mounting Gasket - (H1C/WH1C/H2A)/Turbocompresor junta de montaje - (H1C/WH1C/H2A) 1 A Turbocharger Mounting Gasket/Turbocompresor junta de montaje 1 A Turbocharger Mounting Gasket/Turbocompresor junta de montaje 1 A Turbocharger Oil Drain Gasket/Turbocompresor de aceite en las juntas de drenaje 1 A A Turbocharger Repair Kit - (HX35W/HX40)/Kit de reparación del turbocompresor - (HX35W/HX40) 1 Turbocharger Repair Kit - (H1C/WH1C/H2A)/Kit de reparación del turbocompresor - (H1C/WH1C/H2A) 1 5

9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Cummins B5.9G/G6BT5.9/G/GTA5.9 Part No. Description QTY GASKET SETS A A Head Gasket Set - STD Head Gasket/Cabeza Juego de juntas - STD junta de la culata 1 Head Gasket Set -.25mm OS Head Gasket /Cabeza Juego de juntas -.25mm OS junta de la culata 1 A Lower Gasket Set /Jgo. Inferior de juntas 1 MISCELLANEOUS GASKETS A Cylinder Head Gasket - STD Thickness Head Gasket/Junta de culata - STD Espesor junta de la culata 1 A Cylinder Head Gasket -.25mm Thickness Head Gasket/Junta de culata -.25mm Espesor junta de la culata 1 A Exhaust Manifold Gasket (Stainless Steel)/De escape junta del colector (acero inoxidable) 6 A Exhaust Manifold Gasket (Graphie)/De escape junta del colector (Graphie) 6 A Gear Housing Cover Gasket (Industrial applications)/cubierta de la cubierta de engranajes de juntas (Aplicaciones industriales) 1 A Gear Housing Cover Gasket (Automotive applications)/cubierta de la cubierta de engranajes de juntas (Aplicaciones de automoción) 1 A Gear Housing Gasket/Caja de engranajes de juntas 1 A Intake Manifold Gasket/Colector de admisión Junta 1 A Oil Filter Head Gasket/Filtro de aceite junta de la culata 1 A Filter Head Gasket/La Junta del filtro (Industrial applications) 1 A Filter Head Gasket/La Junta del filtro (Automotive applications) 1 A Oil Pan Gasket /Junta de Cárter 1 A Pick-up Tube Gasket/Pick-up junta de estanqueidad 1 A Rear Cover Gasket/Junta de la cubierta trasera 1 A Rear Cover Sealing Ring/Anillo de sellado de la cubierta trasera 1 A Rocker Cover Bolt Isolator O-Ring/Rocker cubierta de perno aislador O -Ring 6 A Rocker Cover Bolt Seal/Sello de cubierta de perno del eje de balancín 6 A Valve Cover Gasket - Gray/Junta de la tapa de la válvula - Gris 6 A Push Rod Cover Gasket/Barra de empuje junta de la tapa 1 A Push Rod Cover Grommet/Barra de empuje de la cubierta del ojal 6 A Thermostat Seal - Rectangular Seal/Termostato Seal - Seal rectangular 1 A Turbocharger Mounting Gasket - (H1C/WH1C/H2A)/Turbocompresor junta de montaje - (H1C/WH1C/H2A) 1 A Turbocharger Mounting Gasket/Turbocompresor junta de montaje 1 A Turbocharger Mounting Gasket/Turbocompresor junta de montaje 1 A Turbocharger Oil Drain Gasket/Turbocompresor de aceite en las juntas de drenaje 1 A Water Pump Seal Ring/Anillo de sello de la bomba de agua 1 6

10 Cummins GTA8.3/C8.3G Cummins GTA8.3/C8.3G Part No. Description QTY IF G IF G IF G IF G OH G OH G OH G OH G IN-FRAME & COMPLETE OVERHAUL KITS IN-FRAME OVERHAUL KIT - 8.5:1 CR/En marco el kit de reacondicionamiento - 8.5:1 CR 1 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 IN-FRAME OVERHAUL KIT - 8.5:1 CR/En marco el kit de reacondicionamiento - 8.5:1 CR 1 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 COMPLETE OVERHAUL KIT - 8.5:1 CR/KIT COMPLETO DE REVISION - 8.5:1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 COMPLETE OVERHAUL KIT - 8.5:1 CR/KIT COMPLETO DE REVISION - 8.5:1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 SUPER OVERHAUL KIT CONTAINS: Cylinder Kits, Rod Bearings, Main Bearing Set, Cam Bearings, Upper & Lower Gasket Sets, Camshaft & Lifters, Water Pump, Oil Cooler, Thermostat, & Oil Pump. SUPER OVERHAUL KIT :1 CR/KIT SÚPER DE REVISION - AFA8.3L-6CTNA 10.5:1 CR 1 AFA8.3L-6CTTA SUPER OVERHAUL KIT :1 CR/KIT SÚPER DE REVISION :1 CR 1 CYLINDER BLOCK & COMPONENTS A A A A A A A CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 CYLINDER KIT COMPLETE - 8.5:1 CR/CILINDRO KIT COMPLETO - 8.5:1 CR 6 CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 CYLINDER KIT COMPLETE - 8.5:1 CR/CILINDRO KIT COMPLETO - 8.5:1 CR 6 PISTON W/PIN, RETAINER & RINGS :1 CR/Pistón w / Pin, retenedores y anillos :1 CR 6 PISTON W/PIN, RETAINER & RINGS - 8.5:1 CR/Pistón w / Pin, retenedores y anillos - 8.5:1 CR 6 Ring Set, Single Cylinder - STD/Sistema del anillo, de un solo cilindro - STD 6 A Piston Pin/Perno Pistón 6 A Piston Pin Retainers/Perno Pistón Retenedores 12 7

11 Cummins GTA8.3/C8.3G Cummins GTA8.3/C8.3G Part No. Description QTY CYLINDER BLOCK & COMPONENTS (cont.) A A Liner W/Sealing Rings (A liner & A sealing ring)/forro w / anillos de sellado (A forro y anillo de sellado A ) 6 Liner W/Sealing Rings (A liner & A sealing ring)/forro w / anillos de sellado (A forro y anillo de sellado A ) 6 A Camshaft Bearing/Teniendo árbol de levas 7 CONNECTING ROD & COMPONENTS A A A A A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 Rod Bearing Half Upper/Lower -.25mm/Teniendo varilla mitad superior/inferior -.25mm 12 Rod Bearing Half Upper/Lower -.50mm/Teniendo varilla mitad superior/inferior -.50mm 12 Rod Bearing Half Upper/Lower -.75mm/Teniendo varilla mitad superior/inferior -.75mm 12 Rod Bearing Half Upper/Lower mm/Teniendo varilla mitad superior/inferior mm 12 A Piston Pin Bushing/Pistón Alfiler de buje 6 CRANKSHAFT & COMPONENTS A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.25mm)/Principal Conjunto de cojinete (.25mm) 1 A Main Bearing Set (.50mm)/Principal Conjunto de cojinete (.50mm) 1 A Main Bearing Set (.75mm)/Principal Conjunto de cojinete (.75mm) 1 A Main Bearing Set (1.00mm)/Principal Conjunto de cojinete (1.00mm) 1 A Crankshaft w/o Gear/Cigüeñal w / o engranaje 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A OS Oil Seal Kit W/Wear Sleeve/Kit de retenes OS W/manguito de desgaste 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A Rear Crankshaft Seal Kit - STD - Dry Housing/Cigüeñal trasero Juego de juntas - STD - Vivienda en seco 1 A Rear Crankshaft Seal Kit - STD - Wet Housing/Sello trasero del cigüeñal Kit - STD - Mojado Vivienda 1 A OS Oil Seal Kit W/Wear Sleeve/Kit de retenes OS W/manguito de desgaste 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 8

12 Cummins GTA8.3/C8.3G Cummins GTA8.3/C8.3G Part No. Description QTY CAMSHAFT & LIFTERS A A Camshaft - check engine S/N for correct application/árbol de levas - revisar el motor S / N para la correcta aplicación 1 Valve Tappet - 30mm OD - Mechanical/Empujador de válvula - OD de 30 mm - Mecánica 12 A Roller Lifter (C8.3G engines)/rodillo Levantador (motores C8.3G) 12 A Push Rod/Barra de empuje 12 CYLINDER HEAD COMPONENTS A Intake Valve Kit /Kit de Válvula Admisión 6 A Exhaust Valve Kit /Kit de Válvula Escape 6 A Valve Seat - Intake/Asiento de la válvula - Ingesta 6 A Valve Seat - Exhaust/Asiento de la válvula - Escape 6 A Valve Guide - Intake & Exhaust/Guía de la válvula - Admisión y Escape 12 A Valve Keeper/Válvula Guardián 24 A Valve Stem Seal - C-Gas engines/válvula de sellado del vástago - motores C - Gas 12 A Valve Stem Seal - C-Gas Plus/GTA8.3 engines/válvula de sellado del vástago - motores / GTA8.3 C - Gas Plus 12 A Valve Spring - Intake & Exhaust/Válvula de primavera - Admisión y Escape 12 A Valve Spring Retainer - Intake & Exhaust/Válvula de retención de primavera - Admisión y Escape 12 A Cylinder Head Bolt/Tornillos de culata - M14 x 2.00 x A Cylinder Head Bolt/Tornillos de culata - M14 x 2.00 x A Rocker Cover Bolt Seal/Sello de cubierta de perno del eje de balancín 6 A Valve Cover Gasket/Junta de la tapa de la válvula 1 A Oil Filler Cap Gasket/El tapón de relleno de aceite Junta 1 OIL PUMP & COMPONENTS A Oil Pump Assy./Bomba de aceite 1 A Oil Cooler Core/Enfriador de aceite de Núcleo 1 A Oil Cooler Core Inner Gasket/Radiador de aceite Junta Core Interior 1 A Oil Cooler Cover Gasket/Radiador de aceite Junta de cubierta 1 A Oil Pan Gasket /Junta de Cárter 1 Oil Pan Gasket - GTA8.3 eng.only w/full perimiter clamping plates/junta A de Cárter - GTA8.3 placas eng.only w / full perímetro de sujeción 1 A Oil Pick-up Tube Gasket/Pick-up junta de estanqueidad 1 9

13 Cummins GTA8.3/C8.3G Cummins GTA8.3/C8.3G Part No. Description QTY WATER PUMP & COOLING COMPONENTS A Water Pump - Heavy Duty/Bomba de agua - Tarea pesada 1 Water Pump - Heavy Duty - Hardened Pulley (C8.3G Gas Plus)/Bomba A de agua - Tarea pesada -Endurecido Polea (C8.3G Gas Plus) 1 A Water Pump Seal Ring/Anillo de sello de la bomba de agua 1 A Thermostat/Termostato 2 A Thermostat Housing Gasket/Caja termostato Junta 1 A Belt Tensioner - all except Gas Plus/Tensor de correa - todos excepto Ga 1 GASKET SETS A A Head Gasket Set - STD Head Gasket/Cabeza Juego de juntas - STD junta de la culata 1 Head Gasket Set -.25mm OS Head Gasket /Cabeza Juego de juntas -.25mm OS junta de la culata 1 A Lower Gasket Set /Jgo. Inferior de juntas 1 MISCELLANEOUS GASKETS A Exhaust Manifold Gasket/De escape junta del colector 6 A Gear Housing Gasket (housing to block)/caja de engranajes de juntas (viv 1 A Intake Manifold Cover Gasket/Colector de admisión junta de la tapa 1 A Oil Cooler Core Inner Gasket/Radiador de aceite Junta Core Interior 1 A Oil Cooler Cover Gasket/Radiador de aceite Junta de cubierta 1 A Oil Filler Cap Gasket/El tapón de relleno de aceite Junta 1 A Oil Pan Gasket /Junta de Cárter 1 A Oil Pan Gasket - GTA8.3 eng.only w/full perimiter clamping plates/junta de Cárter - GTA8.3 placas eng.only w / full perímetro de sujeción 1 A Oil Pick-up Tube Gasket/Pick-up junta de estanqueidad 1 A Rear Cover Gasket/Junta de la cubierta trasera 1 A Rear Cover Sealing Ring/Anillo de sellado de la cubierta trasera 1 A Rocker Cover Bolt Seal/Sello de cubierta de perno del eje de balancín 6 A Thermostat Housing Gasket/Caja termostato Junta 1 A Turbocharger Mounting Gasket/Turbocompresor junta de montaje 1 A Turbocharger Oil Drain Gasket/Turbocompresor de aceite en las juntas de 1 A Valve Cover Gasket/Junta de la tapa de la válvula 1 A Water Inlet Connection Gasket/Entrada de agua Junta de conexión 1 A Water Outlet Connection Gasket/Salida de agua de juntas de conexión 1 A Water Pump Seal Ring/Anillo de sello de la bomba de agua 1 10

14 Cummins L10G/GLTA-10 Cummins L10G/GLTA-10 Part No. Description QTY IN-FRAME & COMPLETE OVERHAUL KITS IF IN-FRAME OVERHAUL KIT/En marco el kit de reacondicionamiento 1 OH COMPLETE OVERHAUL KIT/KIT COMPLETO DE REVISION 1 CYLINDER BLOCK & COMPONENTS A CYLINDER KIT COMPLETE/CILINDRO KIT COMPLETO 6 A A PISTON W/PIN, RETAINER & RINGS/Pistón w / Pin, retenedores y anillos 6 Ring Set, Single Cylinder - STD/Sistema del anillo, de un solo cilindro - STD 6 A Piston Pin/Perno Pistón 6 A Piston Pin Retainers/Perno Pistón Retenedores 12 A LINER W/SEALING RINGS (A liner & A sealing ring)/liner W / anillos de sellado ( A forro y anillo de sellado A ) 6 A FLANGE SHIM inch/brida SHIM pulgadas AR A FLANGE SHIM inch/brida SHIM pulgadas AR A PISTON COOLING NOZZLE/PISTON inyector de enfriamiento 6 A Camshaft Bearing/Teniendo árbol de levas 7 CONNECTING ROD & COMPONENTS A A A A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Piston Pin Bushing/Pistón Alfiler de buje 6 ~ New number - order when announced as available. 11

15 Cummins L10G/GLTA-10 Cummins L10G/GLTA-10 Part No. Description QTY CRANKSHAFT & COMPONENTS A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 A Main Bearing Set (.50mm)/Principal Conjunto de cojinete (.50mm) 1 A Main Bearing Set (.75mm)/Principal Conjunto de cojinete (.75mm) 1 A Main Bearing Set (1.00mm)/Principal Conjunto de cojinete (1.00mm) 1 A A A A A Main Bearing Set (STD) - tabbed thrustwasher/principal Conjunto de cojinete (STD) - thrustwasher pestañas 1 Main Bearing Set (.010) - tabbed thrustwasher/principal Conjunto de cojinete (.010) - thrustwasher pestañas 1 Main Bearing Set (.020) - tabbed thrustwasher/principal Conjunto de cojinete (.020) - thrustwasher pestañas 1 Main Bearing Set (.030) - tabbed thrustwasher/principal Conjunto de cojinete (.030) - thrustwasher pestañas 1 Main Bearing Set (.040) - tabbed thrustwasher/principal Conjunto de cojinete (.040) - thrustwasher pestañas 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A A A A A A FRONT CRANKSHAFT REPAIR SLEEVE can use w/a /frente DE LA MANGA DE REPARACIÓN cigüeñal puede utilizar w / A REAR CRANKSHAFT SEAL KIT - STD/TRASERO DEL CIGÜEÑAL SEAL KIT - STD 1 REAR CRANKSHAFT SEAL KIT - STD use w/repair sleeve/trasero DE CIGÜEÑAL SEAL KIT - STD uso w de la manga / reparación 1 REAR CRANKSHAFT REPAIR SLEEVE/TRASERO DEL CIGÜEÑAL manguito de reparación 1 ACCESSORY DRIVE SEAL KIT - compressor side/accesorios kit de la unidad SEAL - lado del compresor 1 ACCESSORY DRIVE SEAL KIT - water pump side/accesorios kit de la unidad SEAL - lado de la bomba de agua 1 CAMSHAFT & LIFTERS A CAM FOLLOWER ROLLER/Rodillo de leva SEGUIDOR 12 A VALVE ROLLER PIN/PIN RODILLO DE LA VÁLVULA 12 A CAMSHAFT COVER PLATE GASKET - REAR/ARBOL DE LA CUBIERTA placa de junta - TRASERO 1 ~ New number - order when announced as available. 12

16 Cummins L10G/GLTA-10 Cummins L10G/GLTA-10 Part No. Description QTY CYLINDER HEAD COMPONENTS A VALVE - INTAKE & EXHAUST/VALVULA - ENTRADA DE ESCAPE Y 24 ~ A VALVE SEAT - INTAKE & EXHAUST/VÁLVULA DE ASIENTO - ENTRADA DE ESCAPE Y 24 A VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 24 A VALVE KEEPER/VALVULA ENCARGADO 24 A VALVE STEM SEAL - C-Gas engines/valvula VÁSTAGO SELLO - motores C - Gas 24 A VALVE SPRING - INTAKE & EXHAUST - OUTER/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y - EXTERIOR 24 A VALVE SPRING - INTAKE & EXHAUST - INNER/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y - INTERIOR 24 A INJECTOR TUBE/tubo del inyector 6 A INJECTOR TUBE SEAL/Sello del inyector TUBO 6 A A A O-RING SEAL - UPPER (spark adapter to injector tube)/con junta tórica - SUPERIOR ( adaptador de chispa al inyector tubo) 6 O-RING SEAL - MIDDLE (spark adapter to injector tube)/con junta tórica - MEDIO ( adaptador de chispa al inyector tubo) 6 O-RING SEAL - LOWER (spark adapter to injector tube)/con junta tórica - INFERIOR ( adaptador de chispa al inyector tubo) 6 A ROCKER BOX GASKET/Caja Rocker JUNTA 1 ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA A CUBIERTA 1 OIL PUMP & COMPONENTS A OIL PUMP/BOMBA DE ACEITE 1 A OIL PUMP O-RING SEAL (White PTFE)/BOMBA DE ACEITE O- anillo de sello (blanco PTFE ) 1 A OIL PUMP O-RING SEAL (Tan PTFE)/BOMBA DE ACEITE O- anillo de sello ( Tan PTFE ) 1 A OIL COOLER CORE/NÚCLEO ENFRIADOR DE ACEITE 1 A OIL COOLER MOUNTING O-RING/ENFRIADOR DE ACEITE DE MONTAJE O -RING 2 A OIL COOLER RECTANGULAR SEAL/JUNTA DE ACEITE REFRIGERADOR RECTANGULAR 2 A OIL COOLER MOUNTING GASKET/ENFRIADOR DE ACEITE junta de montaje 2 A OIL PAN GASKET/JUNTA DE ACEITE 1 OIL PICKUP TUBE O-RING/ACEITE DE RECOGIDA DEL TUBO O - A RING 2 ~ New number - order when announced as available. 13

17 Cummins L10G/GLTA-10 Cummins L10G/GLTA-10 Part No. Description QTY WATER PUMP & COOLING COMPONENTS A WATER PUMP - HEAVY DUTY 3 HOLE/BOMBA DE AGUA - RESISTENTE 3 HOLE 1 A WATER PUMP REPAIR/REBUILD KIT/BOMBA DE AGUA DE REPARACIÓN / KIT DE RECONSTRUCCIÓN 1 A WATER PUMP SEAL RING/BOMBA DE AGUA SELLO ANILLO 1 A WATER PUMP CONNECTION O-RING/BOMBA DE AGUA DE CONEXIÓN O -RING 1 A THERMOSTAT/TERMOSTATO 1 A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A SQUARE SEALING RING - THERMOSTAT HOUSING/Cuadrado del anillo de estanqueidad - caja del termostato 1 A WATER PUMP IDLER ASSEMBLY/BOMBA DE AGUA EL PIÑÓN 1 GASKET SETS A HEAD GASKET SET - STD Head Gasket/JUNTA DE CABEZA SET - STD junta de la culata 1 A LOWER GASKET SET/INFERIOR juego de juntas 1 MISCELLANEOUS GASKETS A CAMSHAFT COVER PLATE GASKET - REAR/ARBOL DE LA CUBIERTA placa de junta - TRASERO 1 A EXHAUST MANIFOLD GASKET/JUNTA DE ESCAPE 3 A GEAR COVER GASKET/JUNTA DE LA CUBIERTA DE ENGRANAJES 1 A HAND HOLE GASKET/JUNTA DE MANO HOLE 3 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL PICKUP TUBE O-RING/ACEITE DE RECOGIDA DEL TUBO O - RING 2 A ROCKER BOX GASKET/Caja Rocker JUNTA 1 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 1 A TURBOCHARGER MOUNTING GASKET /TURBOALIMENTADOR junta de montaje 1 A WATER PUMP SEAL RING/BOMBA DE AGUA SELLO ANILLO 1 A WATER PUMP CONNECTION O-RING/BOMBA DE AGUA DE CONEXIÓN O -RING 1 ~ New number - order when announced as available. 14

18 Cummins GSL 8.9L Cummins GSL 8.9L Part No. Description QTY IN-FRAME & COMPLETE OVERHAUL KITS IF G IF G IN-FRAME OVERHAUL KIT - G6LTAA8.9/En marco el kit de reacondicionamiento - G6LTAA8.9 1 IN-FRAME OVERHAUL KIT - G6LTAA8.9 w/cm2180 / En marco el kit de reacondicionamiento - G6LTAA8.9 w / CM OH G COMPLETE OVERHAUL KIT - G6LTAA8.9/KIT COMPLETO DE REVISION - G6LTAA8.9 1 OH G COMPLETE OVERHAUL KIT - G6LTAA8.9 w/cm2180/kit COMPLETO DE REVISION - G6LTAA8.9 w / CM CYLINDER BLOCK & COMPONENTS A A A A CYLINDER KIT COMPLETE - G6LTAA8.9/CILINDRO KIT COMPLETO - G6LTAA8.9 6 CYLINDER KIT COMPLETE - G6LTAA8.9 w/cm2180 / CILINDRO KIT COMPLETO - G6LTAA8.9 w / CM PISTON W/PIN, RETAINER & RINGS - G6LTAA8.9/PISTON W / PIN, el retén y ANILLOS - G6LTAA8.9 6 PISTON W/PIN, RETAINER & RINGS - G6LTAA8.9 w/cm2180 / PISTON W / PIN, el retén y ANILLOS - G6LTAA8.9 w / CM A Ring Set, Single Cylinder - STD/Sistema del anillo, de un solo cilindro - STD 6 A Piston Pin/Perno Pistón 6 A Piston Pin Retainers/Perno Pistón Retenedores 12 A LINER W/SEALING RINGS (A liner & A sealing ring)/liner W / anillos de sellado ( A forro y anillo de sellado A ) 6 A LINER W/O SEALING RINGS / E / S anillos de sellado W LINER 6 A LINER SEALING RING/Revestimiento de sellado ANILLO 6 A Camshaft Bearing/Teniendo árbol de levas 7 ~ New number - order when announced as available. 15

19 Cummins GSL 8.9L Cummins GSL 8.9L Part No. Description QTY A A A A A CONNECTING ROD & COMPONENTS Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 Rod Bearing Half Upper/Lower -.25mm/Teniendo varilla mitad superior/inferior -.25mm 12 Rod Bearing Half Upper/Lower -.50mm/Teniendo varilla mitad superior/inferior -.50mm 12 Rod Bearing Half Upper/Lower -.75mm/Teniendo varilla mitad superior/inferior -.75mm 12 Rod Bearing Half Upper/Lower mm/Teniendo varilla mitad superior/inferior mm 12 A Piston Pin Bushing/Pistón Alfiler de buje 6 CRANKSHAFT & COMPONENTS A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.25mm)/Principal Conjunto de cojinete (.25mm) 1 A Main Bearing Set (.50mm)/Principal Conjunto de cojinete (.50mm) 1 A Main Bearing Set (.75mm)/Principal Conjunto de cojinete (.75mm) 1 A Main Bearing Set (1.00mm)/Principal Conjunto de cojinete (1.00mm) 1 A Crankshaft w/o Gear/Cigüeñal w / o engranaje 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A OS Oil Seal Kit W/Wear Sleeve/Kit de retenes OS W/manguito de desgaste 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A A Rear Crankshaft Seal Kit - STD - Dry Housing/Cigüeñal trasero Juego de juntas - STD - Vivienda en seco 1 Rear Crankshaft Seal Kit - STD - Wet Housing/Sello trasero del cigüeñal Kit - STD - Mojado Vivienda 1 A OS Oil Seal Kit W/Wear Sleeve/Kit de retenes OS W/manguito de desgaste 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A A A CAMSHAFT & LIFTERS CAMSHAFT - check engine S/N for correct application/arbol - revisar el motor S / N para la correcta aplicación 1 FLAT TAPPET LIFTER - check engine S/N for correct application/piso DESCOLGAR TAPPET - revisar el motor S / N para la correcta aplicación 12 ROLLER LIFTER - check engine S/N for correct application/roller ELEVADOR - revisar el motor S / N para la correcta aplicación 12 ~ A PUSH ROD/Barra de empuje 12 ~ New number - order when announced as available. 16

20 Cummins GSL 8.9L Cummins GSL 8.9L Part No. Description QTY CYLINDER HEAD COMPONENTS A VALVE KIT, INTAKE (incl. Valve & Keepers)/Conjunto de válvulas, admisión ( incl. Válvula y encargados ) 6 A VALVE KIT, EXHAUST (incl. Valve & Keepers)/Conjunto de válvulas, ESCAPE ( incl. Válvula y encargados ) 6 A VALVE SEAT - INTAKE/VÁLVULA DE ASIENTO - ADMISION 6 A VALVE SEAT - EXHAUST/VÁLVULA DE ASIENTO - ESCAPE 6 A VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 12 A VALVE KEEPER/VALVULA ENCARGADO 24 A VALVE STEM SEAL - check engine S/N for correct application/valvula STEM SEAL - revisar el motor S / N para la correcta aplicación 12 A VALVE STEM SEAL - check engine S/N for correct application/valvula STEM SEAL - revisar el motor S / N para la correcta aplicación 12 A VALVE SPRING - INTAKE & EXHAUST/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y 12 A VALVE SPRING RETAINER - INTAKE & EXHAUST/VÁLVULA DE RETENCIÓN DE PRIMAVERA - ENTRADA DE ESCAPE Y 12 A CYLINDER HEAD BOLT - M14 x 2.00 x 160/Tornillos de culata - M14 x 2,00 x A CYLINDER HEAD BOLT - M14 x 2.00 x 80/Tornillos de culata - M14 x 2.00 x A ROCKER COVER BOLT SEAL/CURSOR cubierta de tornillo SEAL 6 A VALVE COVER GASKET/VÁLVULA JUNTA DE LA CUBIERTA 1 A OIL FILLER CAP GASKET /JUNTA DE LLENADO DE ACEITE PAC 1 OIL PUMP & COMPONENTS A OIL PUMP/BOMBA DE ACEITE 1 A OIL COOLER CORE/NÚCLEO ENFRIADOR DE ACEITE 1 A A OIL COOLER CORE INNER GASKET /JUNTA DE ACEITE REFRIGERADOR núcleo interno 1 OIL COOLER COVER GASKET/ENFRIADOR DE ACEITE JUNTA DE LA CUBIERTA 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL PICKUP TUBE GASKET/Pick-up junta de estanqueidad 1 ~ New number - order when announced as available. 17

21 Cummins GSL 8.9L Cummins GSL 8.9L Part No. Description QTY A A WATER PUMP & COOLING COMPONENTS WATER PUMP - HEAVY DUTY - check engine S/N for correct application/bomba DE AGUA - RESISTENTE - revisar el motor S / N para la correcta aplicación 1 WATER PUMP - HEAVY DUTY - check engine S/N for correct application/bomba DE AGUA - RESISTENTE - revisar el motor S / N para la correcta aplicación 1 A WATER PUMP SEAL RING/BOMBA DE AGUA SELLO ANILLO 1 A THERMOSTAT/TERMOSTATO 1 GASKET SETS A HEAD GASKET SET - G6LTAA8.9/JUNTA DE CABEZA SET - G6LTAA8.9 1 A HEAD GASKET SET - G6LTAA8.9 w/cm2180 / JUNTA DE CABEZA SET - G6LTAA8.9 w / CM AFA CUSTOM HEAD GASKET SET - All engines/junta DE CABEZA CUSTOM SET - Todos los motores 1 A LOWER GASKET SET - G6LTAA8.9/INFERIOR juego de juntas - G6LTAA8.9 1 LOWER GASKET SET - G6LTAA8.9 w/cm2180 / INFERIOR juego de juntas - A G6LTAA8.9 w / CM MISCELLANEOUS GASKETS A AIR COMPRESSOR MOUNTING GASKET/COMPRESOR DE AIRE junta de montaje 1 A BREATHER MOUNTING O-RING SEAL/RESPIRO DE MONTAJE O -RING SEAL 1 A EGR TUBE CONNECTION GASKET/EGR tubo de conexión JUNTA 2 A EGR VALVE GASKET/JUNTA válvula EGR 1 A EXHAUST MANIFOLD GASKET - check engine S/N for correct application/junta DE ESCAPE - revisar el motor S / N para la correcta aplicación 6 A EXHAUST MANIFOLD GASKET - check engine S/N for correct application/junta DE ESCAPE - revisar el motor S / N para la correcta aplicación 6 A GEAR HOUSING GASKET - housing to block/caja DE ENGRANAJES JUNTA - carcasa para bloquear 1 A OIL COOLER CORE INNER GASKET /JUNTA DE ACEITE REFRIGERADOR núcleo interno 1 A OIL COOLER COVER GASKET/ENFRIADOR DE ACEITE JUNTA DE LA CUBIERTA 1 A OIL FILLER CAP GASKET /JUNTA DE LLENADO DE ACEITE PAC 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL PICKUP TUBE GASKET/Pick-up junta de estanqueidad 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 A REAR COVER SEAL RING/CUBIERTA POSTERIOR SELLO ANILLO 1 A ROCKER COVER BOLT SEAL/CURSOR cubierta de tornillo SEAL 6 A TURBOCHARGER MOUNTING GASKET /TURBOALIMENTADOR junta de montaje 1 A TURBO OIL DRAIN GASKET/TURBO JUNTA DE DRENAJE DE ACEITE 1 A VALVE COVER GASKET/VÁLVULA JUNTA DE LA CUBIERTA 1 A WATER INLET CONNECTION GASKET /ENTRADA DE AGUA JUNTA DE CONEXIÓN 1 A WATER PUMP SEAL RING/BOMBA DE AGUA SELLO ANILLO 1 ~ New number - order when announced as available. 18

22 Cummins G12/GTA12 Cummins G12/GTA12 Part No. Description QTY ~ IF IF IF855G121 IN-FRAME & COMPLETE OVERHAUL KITS - G12/GTA12 IN-FRAME OVERHAUL KIT - 8.5:1 CR/En marco el kit de reacondicionamiento - 8.5:1 CR 1 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 ~ OH OH OH855G121 COMPLETE OVERHAUL KIT - 8.5:1 CR/KIT COMPLETO DE REVISION - 8.5:1 CR COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR CYLINDER BLOCK & COMPONENTS ~ AFA-CKG12851 CYLINDER KIT COMPLETE - 8.5:1 CR/CILINDRO KIT COMPLETO - 8.5:1 CR 6 AFA-CKG12101 CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 AFACK855G121P CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 AAR7460WP AAR3560 AAR12098 PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 RING SET, SINGLE CYLINDER - (8.5:1, 10.0:1 CR Pistons)/Sistema del anillo, de un solo cilindro - ( 8,5 : 1, 10,0 : 1 CR Pistons ) 6 A Piston Pin/Perno Pistón 6 A Piston Pin Retainers/Perno Pistón Retenedores 12 ABM98224 LINER W/SEALING RINGS/LINER W / anillos de estanqueidad 6 AAR70567 LINER SEALING RING KIT/Revestimiento de sellado ANILLO KIT 6 ABM27253 CAMSHAFT BEARING SET/ARBOL rumbo configurado 1 A FRONT COVER GASKET/JUNTA DE LA CUBIERTA FRONTAL 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A67963 OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 AFA185-1 OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 CONNECTING ROD & COMPONENTS A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 A Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior A43067 PISTON PIN BUSHING (straight top CR only)/piston DE ENCHUFE (sólo la parte superior recta CR ) 12 ~ New number - order when announced as available. 19

23 Cummins G12/GTA12 Cummins G12/GTA12 Part No. Description QTY CRANKSHAFT & COMPONENTS A CRANKSHAFT - tapered nose/cigüeñal - nariz cónica 1 A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 A Main Bearing Set (.020)/Principal Conjunto de cojinete (.020) 1 A Main Bearing Set (.030)/Principal Conjunto de cojinete (.030) 1 A Main Bearing Set (.040)/Principal Conjunto de cojinete (.040) 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A FRONT COVER SEAL/SELLO DE LA CUBIERTA FRONTAL 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A REAR CRANKSHAFT SEAL - STD/TRASERO DE CIGÜEÑAL SEAL - STD 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 CAMSHAFT & LIFTERS A CAMSHAFT - small cam - flanged/arbol - pequeña leva - con bridas 1 A CAMSHAFT THRUST WASHER/ARBOL DE EMPUJE LAVADORA 1 AAR1176 CAMSHAFT SHIM KIT/SHIM KIT DE ARBOL 1 A VALVE FOLLOWER ROLLER/RODILLO DE VALVULA SEGUIDOR 12 A VALVE ROLLER PIN/PIN RODILLO DE LA VÁLVULA 12 A VALVE LOCK PIN /VÁLVULA DE BLOQUEO PIN 12 A CAM FOLLOWER SHAFT/CAM eje del seguidor 6 A9266A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 ~ New number - order when announced as available. 20

24 Cummins G12/GTA12 Cummins G12/GTA12 Part No. Description QTY CYLINDER HEAD COMPONENTS A VALVE - INTAKE & EXHAUST/VALVULA - ENTRADA DE ESCAPE Y 24 ~ A VALVE SEAT - INTAKE & EXHAUST/VÁLVULA DE ASIENTO - ENTRADA DE ESCAPE Y 24 A66890 VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 24 AS2037 VALVE KEEPER/VALVULA ENCARGADO 48 ~ A VALVE SPRING - INTAKE & EXHAUST/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y 24 A SPARK PLUG ADAPTER/ADAPTADOR DE BUJIA 6 A SPARK PLUG ADAPTER GASKET/BUJIA adaptador con junta 6 A SPARK PLUG ADAPTER O-RING/BUJIA ADAPTADOR O -RING 6 A PUSH ROD/VARILLA DE EMPUJE 12 A VALVE BRIDGE GUIDE (crosshead)/valvula DE PUENTE DE GUÍA ( cruceta ) 12 A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA A DE CONEXIÓN ( Brida al colector ) 6 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 A WATER MANIFOLD O-RING SEAL/COLECTOR DE AGUA O -RING SEAL 6 A70624 WATER MANIFOLD SECTION O-RING/AGUA MULTIPLE DE SECCIÓN O -RING 4 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 OIL PUMP & COMPONENTS A OIL PUMP MOUNTING GASKET/BOMBA DE ACEITE DE MONTAJE DE JUNTAS 2 A OIL COOLER GASKET/ENFRIADOR DE ACEITE JUNTA 1 A68210 OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A67963 OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 ~ New number - order when announced as available. 21

25 Cummins G12/GTA12 Cummins G12/GTA12 Part No. Description QTY WATER PUMP & COOLING COMPONENTS WATER PUMP - HEAVY DUTY W/O PULLEY/BOMBA DE AGUA - RESISTENTE W / ABM76506 O POLEA 1 A9097 WATER PUMP GASKET/JUNTA DE BOMBA DE AGUA 1 A THERMOSTAT degree - VENTED/TERMOSTATO grados - VENTED AR ~ A THERMOSTAT degree - NON-VENTED/TERMOSTATO grados - NO VENTED AR A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A70441 THERMOSTAT HOUSING GASKET (dual Thermostats)/TERMOSTATO junta de la carcasa ( termostatos duales) 1 A THERMOSTAT NECK GASKET/TERMOSTATO CUELLO JUNTA 1 A NECK CONNECTION GASKET (to Aftercooler)/JUNTA DE CUELLO DE CONEXIÓN ( a Postenfriador ) 1 GASKET SETS A HEAD GASKET SET - STD Head Gasket/JUNTA DE CABEZA SET - STD junta de la culata 1 A LOWER GASKET SET/INFERIOR juego de juntas 1 A AFTERCOOLER GASKET SET/POSTENFRIADOR JUNTAS 1 AFA185-1 OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 MISCELLANEOUS GASKETS A AFTERCOOLER HOUSING GASKET/POSTENFRIADOR VIVIENDA JUNTA 2 A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 A EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 6 A FRONT COVER GASKET/JUNTA DE LA CUBIERTA FRONTAL 1 A GEAR COVER GASKET/JUNTA DE LA CUBIERTA DE ENGRANAJES 1 A GEAR COVER GASKET (1-pc design)/engranaje junta de la tapa ( 1 - pc diseño ) 1 A GEAR COVER GASKET (Puzzle design)/junta DE LA CUBIERTA DE ENGRANAJES (rompecabezas de diseño ) 1 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 A OIL PAN GASKET/JUNTA DE ACEITE 1 A67963 OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL COOLER GASKET/ENFRIADOR DE ACEITE JUNTA 1 A68210 OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 1 A OIL PUMP MOUNTING GASKET/BOMBA DE ACEITE DE MONTAJE DE JUNTAS 2 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A TURBOCHARGER MOUNTING GASKET/TURBOALIMENTADOR junta de montaje 1 A9097 WATER PUMP GASKET/JUNTA DE BOMBA DE AGUA 1 ~ New number - order when announced as available. 22

26 Cummins GTA14/GNTA14-C Ref. No. Part No. Description Cummins GTA-14/GNTA14-C QTY IN-FRAME & COMPLETE OVERHAUL KITS AFAIFG14 AFAOHG14 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 CYLINDER BLOCK & COMPONENTS AFA-CK CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 A PISTON W/PIN, RETAINER & RINGS :1 CR 6 A RING SET, SINGLE CYLINDER/Sistema del anillo, de un solo cilindro 6 A PISTON PIN/Perno Pistón 6 A PISTON PIN RETAINERS/Perno Pistón Retenedores 12 A LINER W/SEALING RINGS/ LINER W / anillos de estanqueidad 6 A LINER SEALING RING KIT/Revestimiento de sellado ANILLO KIT 6 A PISTON COOLING NOZZLE/PISTON inyector de enfriamiento 6 A PISTON COOLING NOZZLE O-RING SEAL/BOQUILLA refrigeración del pistón con junta tórica 6 A CAMSHAFT BEARING SET/ARBOL rumbo configurado 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 AFA OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 A A A CONNECTING ROD & COMPONENTS Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A PISTON PIN BUSHING/PISTON DE ENCHUFE 6 ~ New number - order when announced as available. 23

27 Cummins GTA14/GNTA14-C Ref. No. Part No. Description Cummins GTA-14/GNTA14-C QTY CRANKSHAFT & COMPONENTS A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 A Main Bearing Set (.020)/Principal Conjunto de cojinete (.020) 1 A Main Bearing Set (.030)/Principal Conjunto de cojinete (.030) 1 A Main Bearing Set (.040)/Principal Conjunto de cojinete (.040) 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A A A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 REAR CRANKSHAFT SEAL - STD (dry clutch)/trasero DE CIGÜEÑAL SEAL - ETS ( embrague en seco ) 1 REAR CRANKSHAFT SEAL - STD (wet clutch)/trasero DE CIGÜEÑAL SEAL - ETS ( embrague húmedo ) 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A GEAR COVER GASKET/JUNTA DE LA CUBIERTA DE ENGRANAJES 1 A A ACCESSORY DRIVE & COMPONENTS ACCESSORY DRIVE SUPPORT GASKET/UNIDAD DE ACCESORIOS SOPORTE JUNTA 1 SPLINE HUB COUPLING WASHER/SPLINE cubo de acoplamiento LAVADORA 1 A SPLINE HUB COUPLING BOLT/SPLINE cubo de acoplamiento PERNO 1 A SPLINE HUB COUPLING/SPLINE cubo de acoplamiento 1 A ACCESSORY DRIVE SHAFT DOWEL PIN/TRANSMISION DE ACCESORIOS DEL EJE Clavija 1 A ACCESSORY DRIVE SHAFT/TRANSMISION DE ACCESORIOS DEL EJE 1 A AIR COMPRESSOR MOUNTING GASKET/COMPRESOR DE AIRE junta de montaje 1 A FUEL PUMP GASKET/JUNTA DE BOMBA DE COMBUSTIBLE 1 CAMSHAFT & LIFTERS A A A A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor AR CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor AR CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor AR ~ New number - order when announced as available. 24

28 Cummins GTA14/GNTA14-C Ref. No. Part No. Description Cummins GTA-14/GNTA14-C QTY CYLINDER HEAD COMPONENTS A VALVE - INTAKE & EXHAUST/VALVULA - ENTRADA DE ESCAPE Y 24 A VALVE SEAT - INTAKE & EXHAUST/VÁLVULA DE ASIENTO - ENTRADA DE ESCAPE Y 24 A VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 24 A VALVE KEEPER/VALVULA ENCARGADO 48 A VALVE STEM SEAL 24 A SPARK PLUG ADAPTER/ADAPTADOR DE BUJIA 6 A SPARK PLUG ADAPTER GASKET/BUJIA adaptador con junta 6 A PUSH ROD/VARILLA DE EMPUJE 12 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 WATER HEADER COVER GASKET/AGUA CABECERA JUNTA DE LA A CUBIERTA 1 A A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 OIL PUMP & COMPONENTS A A OIL PUMP MOUNTING GASKET/BOMBA DE ACEITE DE MONTAJE DE JUNTAS 1 OIL PUMP COVER GASKET/BOMBA DE ACEITE JUNTA DE LA CUBIERTA 1 A OIL COOLER CORE/NÚCLEO ENFRIADOR DE ACEITE 1 A OIL COOLER O-RING SEALS/Los sellos de aceite enfriador junta tórica 2 A OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 2 A OIL COOLER SUPPORT GASKET/ENFRIADOR DE ACEITE JUNTA DE SOPORTE 1 A OIL COOLER SUPPORT GASKET/ENFRIADOR DE ACEITE JUNTA DE SOPORTE 1 A OIL TRANSFER CONNECTION GASKET/TRANSFERENCIA DE ACEITE enganche de la junta 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 ~ New number - order when announced as available. 25

29 Cummins GTA14/GNTA14-C Ref. No. Part No. Description Cummins GTA-14/GNTA14-C QTY WATER PUMP & COOLING COMPONENTS A WATER PUMP GASKET/JUNTA DE BOMBA DE AGUA 1 A WATER PUMP OIL SEAL/BOMBA DE AGUA JUNTA DE ACEITE 1 A FAN HUB SPACER GASKET/JUNTA DE FAN HUB ESPACIADOR 1 A THERMOSTAT degree - VENTED/TERMOSTATO grados - VENTED AR ~ A THERMOSTAT degree - NON-VENTED/TERMOSTATO grados - NO VENTED AR A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A THERMOSTAT HOUSING COVER GASKET (Single Thermostat)/Junta Termostato DE LA TAPA (del termostato individual ) 1 A THERMOSTAT HOUSING GASKET (dual Thermostats)/TERMOSTATO junta de la carcasa ( termostatos duales) 1 A THERMOSTAT HOUSING GASKET (dual Thermostats)/TERMOSTATO junta de la carcasa ( termostatos duales) 1 A43463A WATER TRANSFER TUBE O-RING SEAL 2 GASKET SETS A HEAD GASKET SET - STD Head Gasket/JUNTA DE CABEZA SET - STD junta de la culata 1 A LOWER GASKET SET/INFERIOR juego de juntas 1 AFA OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 MISCELLANEOUS GASKETS A AIR COMPRESSOR MOUNTING GASKET/COMPRESOR DE AIRE junta de montaje 1 A EXHAUST MANIFOLD GASKET/JUNTA DE ESCAPE 6 A EXHAUST MANIFOLD GASKET/JUNTA DE ESCAPE 3 A GEAR COVER GASKET/JUNTA DE LA CUBIERTA DE ENGRANAJES 1 A HAND HOLE GASKET/JUNTA DE MANO HOLE 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL PUMP MOUNTING GASKET/BOMBA DE ACEITE DE MONTAJE DE JUNTAS 1 A OIL PUMP COVER GASKET/BOMBA DE ACEITE JUNTA DE LA CUBIERTA 1 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A TURBOCHARGER MOUNTING GASKET/TURBOALIMENTADOR junta de montaje 1 A TURBOCHARGER OIL DRAIN GASKET/TURBOALIMENTADOR JUNTA DE DREN 1 A WATER PUMP GASKET/JUNTA DE BOMBA DE AGUA 1 A WATER PUMP OIL SEAL/BOMBA DE AGUA JUNTA DE ACEITE 1 A FUEL PUMP GASKET/JUNTA DE BOMBA DE COMBUSTIBLE 1 ~ New number - order when announced as available. 26

30 Cummins G743 Cummins G743 Part No. Description QTY IN-FRAME & COMPLETE OVERHAUL KITS - G743 IFG743 OHG743 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 CYLINDER BLOCK & COMPONENTS AFA-CKG AAR7460 CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 AAR12098 RING SET, SINGLE CYLINDER/Sistema del anillo, de un solo cilindro 6 A PISTON PIN/Perno Pistón 6 A PISTON PIN RETAINERS/Perno Pistón Retenedores 12 ABM98224 LINER W/SEALING RINGS/LINER W / anillos de estanqueidad 6 AAR70567 LINER SEALING RING KIT/Revestimiento de sellado ANILLO KIT 6 ABM27253 CAMSHAFT BEARING SET/ARBOL rumbo configurado 1 A FRONT COVER GASKET/JUNTA DE LA CUBIERTA FRONTAL 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A67963 OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 AFA185-1 OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 CONNECTING ROD & COMPONENTS A A A A A A43067 Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior PISTON PIN BUSHING (straight top CR only)/piston DE ENCHUFE (sólo la parte superior recta CR ) 12 ~ New number - order when announced as available. 27

31 Cummins G743 Cummins G743 Part No. Description QTY CRANKSHAFT & COMPONENTS A CRANKSHAFT - tapered nose/cigüeñal - nariz cónica 1 A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 A Main Bearing Set (.020)/Principal Conjunto de cojinete (.020) 1 A Main Bearing Set (.030)/Principal Conjunto de cojinete (.030) 1 A Main Bearing Set (.040)/Principal Conjunto de cojinete (.040) 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A FRONT COVER SEAL/SELLO DE LA CUBIERTA FRONTAL 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A REAR CRANKSHAFT SEAL - STD/TRASERO DE CIGÜEÑAL SEAL - STD 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 CAMSHAFT & LIFTERS A CAMSHAFT - small cam - flanged/arbol - pequeña leva - con bridas 1 A CAMSHAFT THRUST WASHER/ARBOL DE EMPUJE LAVADORA 1 AAR1176 CAMSHAFT SHIM KIT/SHIM KIT DE ARBOL 1 A VALVE FOLLOWER ROLLER/RODILLO DE VALVULA SEGUIDOR 12 A VALVE ROLLER PIN/PIN RODILLO DE LA VÁLVULA 12 A VALVE LOCK PIN /VÁLVULA DE BLOQUEO PIN 12 A CAM FOLLOWER SHAFT/CAM eje del seguidor 6 A9266A A A A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 ~ New number - order when announced as available. 28

32 Cummins G743 Cummins G743 Part No. Description QTY CYLINDER HEAD COMPONENTS A VALVE - INTAKE & EXHAUST/VALVULA - ENTRADA DE ESCAPE Y 24 ~ A VALVE SEAT - INTAKE & EXHAUST/VÁLVULA DE ASIENTO - ENTRADA DE ESCAPE Y 24 A66890 VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 24 AS2037 VALVE KEEPER/VALVULA ENCARGADO 48 ~ A VALVE SPRING - INTAKE & EXHAUST/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y 24 A SPARK PLUG ADAPTER/ADAPTADOR DE BUJIA 6 A SPARK PLUG ADAPTER GASKET/BUJIA adaptador con junta 6 A SPARK PLUG ADAPTER O-RING/BUJIA ADAPTADOR O -RING 6 A PUSH ROD/VARILLA DE EMPUJE 12 A VALVE BRIDGE GUIDE (crosshead)/valvula DE PUENTE DE GUÍA (cruceta) 12 A A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 6 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 A WATER MANIFOLD O-RING SEAL/COLECTOR DE AGUA O -RING SEAL 6 A70624 WATER MANIFOLD SECTION O-RING/AGUA MULTIPLE DE SECCIÓN O - RING 4 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 OIL PUMP & COMPONENTS A68210 OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 1 A OIL COOLER GASKET/ENFRIADOR DE ACEITE JUNTA 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A67963 OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 ~ New number - order when announced as available. 29

33 Cummins G743 Cummins G743 Part No. Description QTY WATER PUMP & COOLING COMPONENTS A9097 WATER PUMP GASKET/JUNTA DE BOMBA DE AGUA 1 A THERMOSTAT degree - VENTED/TERMOSTATO grados - VENTED AR ~ A THERMOSTAT degree - NON-VENTED/TERMOSTATO grados - NO VENTED AR A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A70441 THERMOSTAT HOUSING GASKET (dual Thermostats)/TERMOSTATO junta de la carcasa ( termostatos duales) 1 A THERMOSTAT NECK GASKET/TERMOSTATO CUELLO JUNTA 1 A NECK CONNECTION GASKET (to Aftercooler)/JUNTA DE CUELLO DE CONEXIÓN ( a Postenfriador ) 1 GASKET SETS A HEAD GASKET SET - STD Head Gasket/JUNTA DE CABEZA SET - STD junta de la culata 1 A LOWER GASKET SET/INFERIOR juego de juntas 1 AFA185-1 OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 MISCELLANEOUS GASKETS A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 A EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 6 A FRONT COVER GASKET/JUNTA DE LA CUBIERTA FRONTAL 1 A GEAR COVER GASKET/JUNTA DE LA CUBIERTA DE ENGRANAJES 1 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 A OIL PAN GASKET/JUNTA DE ACEITE 1 A67963 OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL COOLER GASKET/ENFRIADOR DE ACEITE JUNTA 1 A68210 OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A TURBOCHARGER MOUNTING GASKET/TURBOALIMENTADOR junta de montaje 1 A9097 WATER PUMP GASKET/JUNTA DE BOMBA DE AGUA 1 ~ New number - order when announced as available. 30

34 Cummins G855 - SMALL CAM Cummins G855 - Small Cam Part No. Description QTY AFAIF101PG IF855G121 IFAFA851PG OH855G101 OH855G121 OH855G851 AFA855G851 IN-FRAME & COMPLETE OVERHAUL KITS - G855 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 IN-FRAME OVERHAUL KIT - 8.5:1 CR/En marco el kit de reacondicionamiento - 8.5:1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 COMPLETE OVERHAUL KIT - 8.5:1 CR/KIT COMPLETO DE REVISION - 8.5:1 CR SUPER OVERHAUL KIT - 8.5:1 CR - (This kit contains: Cylinder Kits, Rod Bearings, Main Bearing Set, Head Gasket Set, Lower Gasket Set, Cam Brearing Set, Thermostats, Oil Cooler, Oil Pump, Water Pump, Expansion Plugs & Cam Follower Kit) 1 1 CYLINDER BLOCK & COMPONENTS AFACK855G101P CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 AFACK855G121P CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 AFA851PG CYLINDER KIT COMPLETE - 8.5:1 CR/CILINDRO KIT COMPLETO - 8.5:1 CR 6 AFAPK85G101 AAR3560WP A WP PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 PISTON W/PIN & RETAINERS - 8.5:1 CR/PISTON W / PIN y retenedores : 1 CR 6 A RING SET, SINGLE CYLINDER/Sistema del anillo, de un solo cilindro 6 A PISTON PIN/Perno Pistón 6 A PISTON PIN RETAINERS/Perno Pistón Retenedores 12 A A A LINER W/SEALING RINGS - STD LINER/LINER W / anillos de sellado - LINER STD 6 LINER W/SEALING RINGS -.020"/.040" LPF LINER/LINER W / anillos de sellado ". / 040 " LINER LPF AR LINER W/SEALING RINGS -.020" UPF LINER/LINER W / anillos de sellado " LINER UPF AR A LINER SEALING RING KIT/Revestimiento de sellado ANILLO KIT 6 ABM27253 CAMSHAFT BEARING SET/ARBOL rumbo configurado 1 A GEAR COVER GASKET (1 piece design)/engranaje junta de la tapa (1 pieza de diseño) 1 A GEAR COVER GASKET (Puzzle design)/junta DE LA CUBIERTA DE ENGRANAJES (rompecabezas de diseño ) 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL TUBE RECTANGULAR SEAL/JUNTA DE ACEITE tubo rectangular 1 A OIL TUBE O-RING SEAL/TUBO DE ACEITE O -RING SEAL 1 ~ New number - order when announced as available. 31

35 Cummins G855 - SMALL CAM Cummins G855 - Small Cam Part No. Description QTY CONNECTING ROD & COMPONENTS FOR STRAIGHT TOP SMALL CAM RODS A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 A Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior FOR TAPERED TOP SMALL CAM RODS A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 A Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior FOR ENGINES USING BIG CAM CONNECTING RODS A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 A Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior A43067 A PISTON PIN BUSHING (straight top CR only)/piston DE ENCHUFE (sólo la parte superior recta CR ) 12 PISTON PIN BUSHING - Tapered Top Connecting Rod/PISTON DE ENCHUFE - cónico superior de la biela 6 CRANKSHAFT & COMPONENTS A CRANKSHAFT - tapered nose/cigüeñal - nariz cónica 1 A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 A Main Bearing Set (.020)/Principal Conjunto de cojinete (.020) 1 A Main Bearing Set (.030)/Principal Conjunto de cojinete (.030) 1 A Main Bearing Set (.040)/Principal Conjunto de cojinete (.040) 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A REAR CRANKSHAFT SEAL - STD/TRASERO DE CIGÜEÑAL SEAL - STD 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 ~ New number - order when announced as available. 32

36 Cummins G855 - SMALL CAM Cummins G855 - Small Cam Part No. Description QTY CAMSHAFT & LIFTERS A CAMSHAFT - small cam - flanged/arbol - pequeña leva - con bridas 1 A CAMSHAFT THRUST WASHER/ARBOL DE EMPUJE LAVADORA 1 AAR1176 CAMSHAFT SHIM KIT/SHIM KIT DE ARBOL 1 A VALVE FOLLOWER ROLLER/RODILLO DE VALVULA SEGUIDOR 12 A VALVE ROLLER PIN/PIN RODILLO DE LA VÁLVULA 12 A VALVE LOCK PIN /VÁLVULA DE BLOQUEO PIN 12 A CAM FOLLOWER SHAFT/CAM eje del seguidor 6 A PUSH ROD/VARILLA DE EMPUJE 12 A9266A A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CYLINDER HEAD COMPONENTS A VALVE - INTAKE & EXHAUST/VALVULA - ENTRADA DE ESCAPE Y 24 A VALVE SEAT - INTAKE & EXHAUST/VÁLVULA DE ASIENTO - ENTRADA DE ESCAPE Y 24 A VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 24 A VALVE KEEPER/VALVULA ENCARGADO 48 A VALVE SPRING - INTAKE & EXHAUST/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y 24 A VALVE SPRING RETAINER/VÁLVULA DE RETENCIÓN DE PRIMAVERA 24 A SPARK PLUG ADAPTER/ADAPTADOR DE BUJIA 6 A SPARK PLUG ADAPTER GASKET/BUJIA adaptador con junta 6 A SPARK PLUG ADAPTER O-RING/BUJIA ADAPTADOR O -RING 6 A PUSH ROD/VARILLA DE EMPUJE 12 A VALVE BRIDGE GUIDE (crosshead)/valvula DE PUENTE DE GUÍA (cruceta) 12 A A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 1 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 A WATER MANIFOLD O-RING SEAL/COLECTOR DE AGUA O -RING SEAL 6 A70624 WATER MANIFOLD SECTION O-RING/AGUA MULTIPLE DE SECCIÓN O -RING 4 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A ROCKER COVER GASKET (plastic carrier design)/junta DE TAPA DE BALANCINES ( diseño de soporte de plástico ) 3 ~ New number - order when announced as available. 33

37 Cummins G855 - SMALL CAM Cummins G855 - Small Cam Part No. Description QTY OIL PUMP & COMPONENTS A OIL COOLER CORE (6.5" L Core)/ENFRIADOR DE ACEITE BASE (6.5 " L Core) 1 A OIL COOLER CORE (16" L Core)/ENFRIADOR DE ACEITE BASE (16 " L Core) 1 A AFA179 AFA180 AFTERCOOLER HOUSING GASKET (Flanged Core)/POSTENFRIADOR VIVIENDA JUNTA (con bridas Core ) 2 OIL COOLER GASKET KIT (6.5" L Core)/KIT DE JUNTA DE ACEITE enfriador (6.5 " L Core) 1 OIL COOLER GASKET KIT (16" L Core)/KIT DE JUNTA DE ACEITE enfriador (16 " L Core) 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL TUBE RECTANGULAR SEAL/JUNTA DE ACEITE tubo rectangular 1 A OIL TUBE O-RING SEAL/TUBO DE ACEITE O -RING SEAL 1 WATER PUMP & COOLING COMPONENTS AAR4284 WATER PUMP ASSEMBLY - W/PULLEY/AGUA BOMBA DE MONTAJE - W / POLEA 1 AFA102 WATER PUMP REPAIR KIT/KIT DE BOMBA DE AGUA DE REPARACIÓN 1 WATER PUMP MOUNTING GASKET/BOMBA DE AGUA JUNTA DE A MONTAJE 1 A THERMOSTAT degree - VENTED/TERMOSTATO grados - VENTED 1 A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A70441 THERMOSTAT HOUSING GASKET/JUNTA caja del termostato 1 A THERMOSTAT HOUSING GASKET (FFC engines)/termostato junta de la carcasa ( motores FFC ) 1 A THERMOSTAT NECK GASKET/TERMOSTATO CUELLO JUNTA 1 A NECK CONNECTION GASKET (to Aftercooler)/JUNTA DE CUELLO DE CONEXIÓN ( a Postenfriador ) 1 GASKET SETS A A A A A HEAD GASKET SET - STD (A Head Gasket)/JUNTA DE CABEZA SET - ETS ( A junta de la culata ) 1 HEAD GASKET SET - STD (A Head Gasket)/JUNTA DE CABEZA SET - ETS ( A junta de la culata ) 1 LOWER GASKET SET - W/SEALS (Non-FFC/non Piston Cooled)/INFERIOR juego de juntas - W / Sellos ( no FFC / no Pistón refrigerado por ) 1 LOWER GASKET SET - W/SEALS (Non-FFC/Piston Cooled)/INFERIOR juego de juntas - W / sellos ( no FFC / pistón enfriada) 1 LOWER GASKET SET - W/SEALS (FFC/Piston Cooled)/INFERIOR Juego de juntas - W / Sellos ( FFC / pistón enfriada) 1 ~ New number - order when announced as available. 34

38 Cummins G855 - SMALL CAM Cummins G855 - Small Cam Part No. Description QTY A A GASKET SETS (Cont.) COMPLETE OVERHAUL GASKET SET (non-piston Cooled)/Total de motores JUNTAS ( no Pistón refrigerado por ) 1 COMPLETE OVERHAUL GASKET SET (Piston Cooled)/Total de motores JUNTAS ( pistón enfriada) 1 A AFTERCOOLER GASKET SET/POSTENFRIADOR JUNTAS 1 AFA179 AFA180 AFA185-1 OIL COOLER GASKET KIT (6.5" L Core)/KIT DE JUNTA DE ACEITE enfriador (6.5 " L Core) 1 OIL COOLER GASKET KIT (16" L Core)/KIT DE JUNTA DE ACEITE enfriador (16 " L Core) 1 OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 A MISCELLANEOUS GASKETS AFTERCOOLER HOUSING GASKET (Flanged Core)/POSTENFRIADOR VIVIENDA JUNTA (con bridas Core ) 2 A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 A EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 1 A GEAR COVER GASKET (1 piece design)/engranaje junta de la tapa (1 pieza de diseño) 1 A GEAR COVER GASKET (Puzzle design)/junta DE LA CUBIERTA DE ENGRANAJES (rompecabezas de diseño ) 1 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 3 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL TUBE RECTANGULAR SEAL/JUNTA DE ACEITE tubo rectangular 1 A OIL TUBE O-RING SEAL/TUBO DE ACEITE O -RING SEAL 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A ROCKER COVER GASKET (plastic carrier design)/junta DE TAPA DE BALANCINES ( diseño de soporte de plástico ) 3 A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A70441 THERMOSTAT HOUSING GASKET/JUNTA caja del termostato 1 A THERMOSTAT HOUSING GASKET (FFC engines)/termostato junta de la carcasa ( motores FFC ) 1 A THERMOSTAT NECK GASKET/TERMOSTATO CUELLO JUNTA 1 A TURBOCHARGER MOUNTING GASKET/TURBOALIMENTADOR junta de montaje 1 A WATER MANIFOLD O-RING SEAL/COLECTOR DE AGUA O -RING SEAL 6 A70624 WATER MANIFOLD SECTION O-RING /AGUA MULTIPLE DE SECCIÓN O -RING 4 A WATER PUMP MOUNTING GASKET/BOMBA DE AGUA JUNTA DE MONTAJE 1 ~ New number - order when announced as available. 35

39 Cummins G855 - BIG CAM Cummins G855 - Big Cam Part No. Description QTY IN-FRAME & COMPLETE OVERHAUL KITS - G855 AFAIF101PG IF855G121 IFAFA851PG OH855G101 OH855G121 OH855G851 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 IN-FRAME OVERHAUL KIT :1 CR/En marco el kit de reacondicionamiento :1 CR 1 IN-FRAME OVERHAUL KIT - 8.5:1 CR/En marco el kit de reacondicionamiento - 8.5:1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 COMPLETE OVERHAUL KIT :1 CR/KIT COMPLETO DE REVISION :1 CR 1 COMPLETE OVERHAUL KIT - 8.5:1 CR/KIT COMPLETO DE REVISION - 8.5:1 CR 1 CYLINDER BLOCK & COMPONENTS AFACK855G101P CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 AFACK855G121P CYLINDER KIT COMPLETE :1 CR/CILINDRO KIT COMPLETO :1 CR 6 AFA851PG CYLINDER KIT COMPLETE - 8.5:1 CR/CILINDRO KIT COMPLETO - 8.5:1 CR 6 AFAPK85G101 AAR3560WP A WP PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 PISTON W/PIN & RETAINERS - 8.5:1 CR/PISTON W / PIN y retenedores : 1 CR 6 A RING SET, SINGLE CYLINDER/Sistema del anillo, de un solo cilindro 6 A PISTON PIN/Perno Pistón 6 A PISTON PIN RETAINERS/Perno Pistón Retenedores 12 A A A LINER W/SEALING RINGS - STD LINER/LINER W / anillos de sellado - LINER STD 6 LINER W/SEALING RINGS -.020"/.040" LPF LINER/LINER W / anillos de sellado ". / 040 " LINER LPF AR LINER W/SEALING RINGS -.020" UPF LINER/LINER W / anillos de sellado " LINER UPF AR A LINER SEALING RING KIT/Revestimiento de sellado ANILLO KIT 6 A CAMSHAFT BEARING SET/ARBOL rumbo configurado 1 A A GEAR COVER GASKET (1 piece design)/engranaje junta de la tapa (1 pieza de diseño) 1 GEAR COVER GASKET (Puzzle design)/junta DE LA CUBIERTA DE ENGRANAJES (rompecabezas de diseño ) 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL TUBE RECTANGULAR SEAL/JUNTA DE ACEITE tubo rectangular 1 A OIL TUBE O-RING SEAL/TUBO DE ACEITE O -RING SEAL 1 ~ New number - order when announced as available. 36

40 Cummins G855 - BIG CAM Cummins G855 - Big Cam Part No. Description QTY CONNECTING ROD & COMPONENTS TAPERED TOP BIG CAM CONNECTING RODS 12 A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 A Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior A PISTON PIN BUSHING - Tapered Top Connecting Rod/PISTON DE ENCHUFE - cónico superior de la biela 6 CRANKSHAFT & COMPONENTS A CRANKSHAFT - tapered nose/cigüeñal - nariz cónica 1 CRANKSHAFT VIBRATION DAMPER/CIGÜEÑAL AMORTIGUADOR DE A VIBRACIONES 1 A Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 A Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 A Main Bearing Set (.020)/Principal Conjunto de cojinete (.020) 1 A Main Bearing Set (.030)/Principal Conjunto de cojinete (.030) 1 A Main Bearing Set (.040)/Principal Conjunto de cojinete (.040) 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 Front Crankshaft Repair Sleeve/Reparación de la manga delantera del A cigüeñal 1 A REAR CRANKSHAFT SEAL - STD/TRASERO DE CIGÜEÑAL SEAL - STD 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 CAMSHAFT & LIFTERS A21533 CAMSHAFT THRUST WASHER/ARBOL DE EMPUJE LAVADORA 1 AAR1176 CAMSHAFT SHIM KIT/SHIM KIT DE ARBOL 1 A VALVE FOLLOWER ROLLER/RODILLO DE VALVULA SEGUIDOR 12 A VALVE ROLLER PIN/PIN RODILLO DE LA VÁLVULA 12 A VALVE LOCK PIN /VÁLVULA DE BLOQUEO PIN 12 A CAM FOLLOWER SOCKET/Seguidor de leva TOMA 12 A CAM FOLLOWER SHAFT/CAM eje del seguidor 6 A PUSH ROD/VARILLA DE EMPUJE 12 A A A A A CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 CAM FOLLOWER GASKET in. thick/seguidor de leva JUNTA de espesor 3 ~ New number - order when announced as available. 37

41 Cummins G855 - BIG CAM Cummins G855 - Big Cam Part No. Description QTY CYLINDER HEAD COMPONENTS A VALVE - INTAKE & EXHAUST/VALVULA - ENTRADA DE ESCAPE Y 24 A VALVE SEAT - INTAKE & EXHAUST/VÁLVULA DE ASIENTO - ENTRADA DE ESCAPE Y 24 A VALVE GUIDE - INTAKE & EXHAUST/GUÍA DE VÁLVULA - ENTRADA DE ESCAPE Y 24 A VALVE KEEPER/VALVULA ENCARGADO 48 A VALVE SPRING - INTAKE & EXHAUST/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y 24 A VALVE SPRING RETAINER/VÁLVULA DE RETENCIÓN DE PRIMAVERA 24 A SPARK PLUG ADAPTER/ADAPTADOR DE BUJIA 6 A SPARK PLUG ADAPTER GASKET/BUJIA adaptador con junta 6 A SPARK PLUG ADAPTER O-RING/BUJIA ADAPTADOR O -RING 6 A PUSH ROD/VARILLA DE EMPUJE 12 A VALVE BRIDGE GUIDE (crosshead)/valvula DE PUENTE DE GUÍA (cruceta) 12 A A A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 1 EXHAUST MANIFOLD O-RING (Water Cooled Manifold)/ESCAPE O -RING ( refrigerado por agua del colector ) 6 INTAKE MANIFOLD GASKET (use qty. 6 w/flame Arrestor)/JUNTA colector A de admisión ( uso Cant. 6 w / supresor de llamas ) 3 A WATER MANIFOLD O-RING SEAL/COLECTOR DE AGUA O -RING SEAL 6 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A ROCKER COVER GASKET (plastic carrier design)/junta DE TAPA DE BALANCINES ( diseño de soporte de plástico ) 3 OIL PUMP & COMPONENTS A A A A OIL COOLER CORE (13" L End Plated Design Core)/ENFRIADOR DE ACEITE BASE ( 13 " L extremo con placa Core Design ) 1 AFTERCOOLER HOUSING GASKET (Flanged Core)/POSTENFRIADOR VIVIENDA JUNTA (con bridas Core ) 2 AFTERCOOLER HOUSING GASKET (Crossbolt Design Core)/POSTENFRIADOR VIVIENDA JUNTA (Crossbolt Core Design) 1 OIL COOLER GASKET KIT (13" L End Plated Design Core)/KIT DE ENFRIADOR DE ACEITE JUNTA (13 " L extremo con placa Core Design) 1 A OIL PUMP ASSEMBLY/Bomba de aceite 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL TUBE RECTANGULAR SEAL/JUNTA DE ACEITE tubo rectangular 1 A OIL TUBE O-RING SEAL/TUBO DE ACEITE O -RING SEAL 1 ~ New number - order when announced as available. 38

42 Cummins G855 - BIG CAM Cummins G855 - Big Cam Part No. Description QTY WATER PUMP & COOLING COMPONENTS A A WATER PUMP REPAIR KIT/KIT DE BOMBA DE AGUA DE REPARACIÓN 1 WATER PUMP MOUNTING GASKET/BOMBA DE AGUA JUNTA DE MONTAJE 1 A WATER PUMP IDLER ASSEMBLY/BOMBA DE AGUA EL PIÑÓN 1 A A A THERMOSTAT degree - NON-VENTED/TERMOSTATO grados - NO VENTED 1 SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 THERMOSTAT HOUSING GASKET (FFC engines)/termostato junta de la carcasa ( motores FFC ) 1 GASKET SETS A A A HEAD GASKET SET - STD (A Head Gasket)/JUNTA DE CABEZA SET - ETS ( A junta de la culata ) 1 HEAD GASKET SET - STD (A Head Gasket)/JUNTA DE CABEZA SET - ETS ( A junta de la culata ) 1 LOWER GASKET SET - W/SEALS (FFC/Piston Cooled)/INFERIOR Juego de juntas - W / Sellos ( FFC / pistón enfriada) 1 A AFTERCOOLER GASKET SET/POSTENFRIADOR JUNTAS 1 AFA173 CAM FOLLOWER GASKET KIT(BIG CAM)/Seguidor de leva JUNTA KIT (BIG CAM ) 1 A AFA185-2 OIL COOLER GASKET KIT (13" L End Plated Design Core)/KIT DE ENFRIADOR DE ACEITE JUNTA (13 " L extremo con placa Core Design) 1 OIL PAN INSTALLATION KIT (includes all gaskets & seals to install the oil pan)/kit DE ACEITE DE INSTALACIÓN ( incluye todas las juntas y sellos para instalar el cárter de aceite ) 1 ~ New number - order when announced as available. 39

43 Cummins G855 - BIG CAM Cummins G855 - Big Cam Part No. Description QTY A A MISCELLANEOUS GASKETS AFTERCOOLER HOUSING GASKET (Flanged Core)/POSTENFRIADOR VIVIENDA JUNTA (con bridas Core ) 2 AFTERCOOLER HOUSING GASKET (Crossbolt Design Core)/POSTENFRIADOR VIVIENDA JUNTA (Crossbolt Core Design) 1 A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE ( a Culata ) 6 A EXH. OUTLET CONNECTION GASKET (Flange to Manifold)/ESC. SALIDA DE JUNTA DE CONEXIÓN ( Brida al colector ) 6 A EXHAUST MANIFOLD O-RING (Water Cooled Manifold)/ESCAPE O -RING ( refrigerado por agua del colector ) 1 A GEAR COVER GASKET (1 piece design)/engranaje junta de la tapa (1 pieza de diseño) 1 A GEAR COVER GASKET (Puzzle design)/junta DE LA CUBIERTA DE ENGRANAJES (rompecabezas de diseño ) 1 A INTAKE MANIFOLD GASKET (use qty. 6 w/flame Arrestor)/JUNTA colector de admisión ( uso Cant. 6 w / supresor de llamas ) 3 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL TUBE RECTANGULAR SEAL/JUNTA DE ACEITE tubo rectangular 1 A OIL TUBE O-RING SEAL/TUBO DE ACEITE O -RING SEAL 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 3 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 3 A ROCKER COVER GASKET (plastic carrier design)/junta DE TAPA DE BALANCINES ( diseño de soporte de plástico ) 3 A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 1 A THERMOSTAT HOUSING GASKET (FFC engines)/termostato junta de la carcasa ( motores FFC ) 1 A TURBOCHARGER MOUNTING GASKET/TURBOALIMENTADOR junta de montaje 1 A WATER MANIFOLD O-RING SEAL/COLECTOR DE AGUA O -RING SEAL 6 A WATER PUMP MOUNTING GASKET/BOMBA DE AGUA JUNTA DE MONTAJE 1 ~ New number - order when announced as available. 40

44 Cummins G19/GTA19 NOTE: FOR KTA19GC engines, check engine S/N for correct additional parts. Cummins G19/GTA19/KTA19GC Part No. Description QTY IN-FRAME & COMPLETE OVERHAUL KITS - G19/GTA19 CALL US In-Frame/Complete Overhaul Kits - THERE ARE TOO MANY COMBINATIONS OF PARTS BASED ON ENGINE SERIAL NUMBERS TO CREATE A PRE-MADE ENGINE KIT FOR THESE ENGINES. PLEASE CALL FOR A CUSTOM ENGINE KIT FOR YOUR PARTICULAR ENGINE. 1 IN-FRAME & COMPLETE OVERHAUL KITS - KTA19GC A COMPLETE OVERHAUL KIT/KIT COMPLETO DE REVISION 1 CYLINDER BLOCK & COMPONENTS AFA-PK5860NG AFA-PK5861NG PISTON W/PIN & RETAINERS :1 CR/PISTON W / PIN y retenedores : 1 CR 6 PISTON W/PIN & RETAINERS - 8.5:1 CR/PISTON W / PIN y retenedores : 1 CR 6 A PISTON W/PIN & RETAINERS/PISTON W / PIN y retenedores - KT19GC 6 A RING SET, SINGLE CYLINDER/Sistema del anillo, de un solo cilindro 6 RING SET, SINGLE CYLINDER/Sistema del anillo, de un solo cilindro - A KTA19GC only 6 A PISTON PIN/Perno Pistón 6 A PISTON PIN RETAINERS/Perno Pistón Retenedores 12 A A A A LINER W/SEALING RINGS - STD LINER/LINER W / anillos de sellado - LINER STD 6 LINER W/SEALING RINGS inch O/S /LINER ANILLOS W / SELLADO pulgadas O/S 6 LINER W/SEALING RINGS inch O/S /LINER ANILLOS W / SELLADO pulgadas O/S 6 LINER W/SEALING RINGS - STD UPF/LINER W / anillos de sellado - STD UPF 6 AAR70577 LINER SEALING RING KIT/Revestimiento de sellado ANILLO KIT 6 A CAMSHAFT BEARING/TENIENDO CAMSHAFT 7 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL PAN GASKET/JUNTA DE ACEITE = KTA19GC 1 A OIL PAN ADAPTER GASKET/JUNTA DE ACEITE ADAPTADOR 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 CONNECTING ROD & COMPONENTS A Rod Bearing Half Upper/Lower - STD/Teniendo varilla mitad superior/inferior - STD 12 A Rod Bearing Half Upper/Lower -.010/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.020/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.030/Teniendo varilla mitad superior/inferior A Rod Bearing Half Upper/Lower -.040/Teniendo varilla mitad superior/inferior A PISTON PIN BUSHING/PISTON DE ENCHUFE 6 ~ New number - order when announced as available. 41

45 Cummins G19/GTA19 NOTE: FOR KTA19GC engines, check engine S/N for correct additional parts. Cummins G19/GTA19/KTA19GC Part No. Description QTY CRANKSHAFT & COMPONENTS AAR12270 Main Bearing Set (STD)/Principal Conjunto de cojinete (STD) 1 AAR12271 Main Bearing Set (.010)/Principal Conjunto de cojinete (.010) 1 AAR12272 Main Bearing Set (.020)/Principal Conjunto de cojinete (.020) 1 AAR12273 Main Bearing Set (.030)/Principal Conjunto de cojinete (.030) 1 A Front Crankshaft Seal - STD/Frente Cigüeñal Sello - STD 1 A Front Crankshaft Repair Sleeve/Reparación de la manga delantera del cigüeñal 1 A REAR CRANKSHAFT SEAL - STD/TRASERO DE CIGÜEÑAL SEAL - STD 1 A Rear Crankshaft Repair Sleeve/Posterior del cigüeñal manga Reparación 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 CAMSHAFT & LIFTERS A CAMSHAFT HOLE COVER GASKET/ARBOL DE LA CUBIERTA DEL ORIFICIO JUNTA 1 A CAMSHAFT THRUST WASHER/ARBOL DE EMPUJE LAVADORA 1 A CAM FOLLOWER COVER GASKET/Seguidor de leva JUNTA DE LA CUBIERTA 6 A VALVE FOLLOWER ROLLER/RODILLO DE VALVULA SEGUIDOR 12 A VALVE ROLLER PIN/PIN RODILLO DE LA VÁLVULA 12 A CAM FOLLOWER PIN LOCKWIRE/Seguidor de leva PIN lockwire 6 A CAM FOLLOWER SOCKET/Seguidor de leva TOMA 12 A PUSH ROD (Intake & Exhaust)/La varilla de empuje ( Admisión y Escape ) 12 ~ New number - order when announced as available. 42

46 Cummins G19/GTA19 NOTE: FOR KTA19GC engines, check engine S/N for correct additional parts. Cummins G19/GTA19/KTA19GC Part No. Description QTY CYLINDER HEAD COMPONENTS A VALVE KIT - EXHAUST/KIT DE VÁLVULA - ESCAPE 12 A VALVE KIT - INTAKE/KIT DE VÁLVULA - ADMISION 12 ~ A VALVE SEAT - EXHAUST/VÁLVULA DE ASIENTO - ESCAPE 12 ~ A VALVE SEAT - INTAKE/VÁLVULA DE ASIENTO - ADMISION 12 ~ A VALVE GUIDE - EXHAUST/GUÍA DE VÁLVULA - ESCAPE 12 ~ A VALVE GUIDE - INTAKE/GUÍA DE VÁLVULA - ADMISION 12 A VALVE KEEPER/VALVULA ENCARGADO 48 A VALVE SPRING - INTAKE & EXHAUST/VALVULA DE PRIMAVERA - ENTRADA DE ESCAPE Y 24 VALVE SPRING RETAINER - INTAKE & EXHAUST/VÁLVULA DE RETENCIÓN DE PRIMAVERA - ENTRADA DE ESCAPE Y 24 A A VALVE ROTATOR/VALVULA ROTADOR 24 A SPARK PLUG ADAPTER/ADAPTADOR DE BUJIA 6 A SPARK PLUG ADAPTER GASKET/BUJIA adaptador con junta 6 A SPARK PLUG ADAPTER O-RING/BUJIA ADAPTADOR O -RING 6 A CROSSHEAD VALVE/CRUCETA VÁLVULA 12 A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE (a Culata) 6 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 6 A ROCKER LEVER ADJUSTING SCREW/CURSOR palanca de ajuste SCREW 12 ROCKER LEVER ADJUSTING SCREW NUT/CURSOR palanca de ajuste AS212 TUERCA 12 A ROCKER LEVER BUSHING/BUJE BOTÓN DE DIRECCIÓN DE PALANCA 6 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 6 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 6 OIL PUMP & COMPONENTS A OIL PUMP ASSEMBLY/Bomba de aceite 2 A OIL COOLER CORE KIT (incl. Core & mounting bolts)/enfriador DE ACEITE BASE KIT ( incl. Core & pernos de montaje ) 1 A OIL COOLER GASKET/ENFRIADOR DE ACEITE JUNTA 4 A OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 1 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL PAN GASKET/JUNTA DE ACEITE = KTA19GC 1 A OIL PAN ADAPTER GASKET/JUNTA DE ACEITE ADAPTADOR 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 ~ New number - order when announced as available. 43

47 Cummins G19/GTA19 NOTE: FOR KTA19GC engines, check engine S/N for correct additional parts. Cummins G19/GTA19/KTA19GC Part No. Description QTY WATER PUMP & COOLING COMPONENTS A AFTERCOOLER CORE/NÚCLEO POSTENFRIADOR 1 A AFTERCOOLER HOUSING GASKET/POSTENFRIADOR VIVIENDA JUNTA 2 A WATER PUMP MOUNTING GASKET/BOMBA DE AGUA JUNTA DE MONTAJE 1 A THERMOSTAT degree/termostato grados 2 SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de A estanqueidad - TERMOSTATO 2 A THERMOSTAT HOUSING GASKET (dual Thermostats)/TERMOSTATO junta de la carcasa ( termostatos duales) 1 GASKET SETS A A A HEAD GASKET SET - STD Head Gasket (3 push rod holes)/junta DE CABEZA SET - STD junta de la culata ( 3 huecos de las varillas de empuje ) HEAD GASKET SET - STD Head Gasket (single push rod hole)/junta DE CABEZA SET - STD junta de la culata (pulsador único agujero de la varilla) 1 HEAD GASKET SET - STD Head Gasket/JUNTA DE CABEZA SET - STD junta de la culata = KTA19GC 1 1 A LOWER GASKET SET/INFERIOR juego de juntas 1 A MISCELLANEOUS GASKETS AFTERCOOLER HOUSING GASKET/POSTENFRIADOR VIVIENDA JUNTA 2 A EXHAUST MANIFOLD GASKET (to Cylinder Head)/JUNTA DE ESCAPE (a Culata) 6 A INTAKE MANIFOLD GASKET/JUNTA colector de admisión 6 A OIL PAN GASKET/JUNTA DE ACEITE 1 A OIL PAN ADAPTER GASKET/JUNTA DE ACEITE ADAPTADOR 1 A OIL SUCTION TUBE GASKET/JUNTA DE ACEITE TUBO DE SUCCIÓN 1 A OIL COOLER GASKET/ENFRIADOR DE ACEITE JUNTA 4 A OIL COOLER HOUSING GASKET/ENFRIADOR DE ACEITE JUNTA DE VIVIENDA 1 A REAR COVER GASKET/JUNTA DE LA CUBIERTA POSTERIOR 1 A ROCKER HOUSING GASKET/BOTÓN DE DIRECCIÓN DE VIVIENDA JUNTA 6 A ROCKER COVER GASKET/BOTÓN DE DIRECCIÓN JUNTA DE LA CUBIERTA 6 A SQUARE SEALING RING - THERMOSTAT/Cuadrado del anillo de estanqueidad - TERMOSTATO 2 A THERMOSTAT HOUSING GASKET (dual Thermostats)/TERMOSTATO junta de la carcasa ( termostatos duales) 1 A TURBOCHARGER MOUNTING GASKET/TURBOALIMENTADOR junta de montaje 1 A WATER PUMP MOUNTING GASKET/BOMBA DE AGUA JUNTA DE MONTAJE 1 ~ New number - order when announced as available. 44

48 G3300 SERIES ENGINES KIT IDENTIFICATION Using the information below, select the correct engine rebuild kit based on your specific Engine SERIAL NUMBER. Some engines require specific Engine SERIAL NUMBERS to correctly identify the piston used in your particular engine. You must refer to the OE parts information or contact AFA Customer Service for more information. G3304 Engines AFA IN-FRAME KITS INCLUDE COMPLETE CYLINDER KITS (Liner, Liner Seals, Piston, Rings, Pins, Retainers), ROD BEARINGS, MAIN BEARINGS, UPPER GASKET SET AND OIL PAN GASKET. IF3304NG-1 IN-FRAME OVERHAUL KIT :1 CR Engine S/N A4E1-UP, S4E1-UP, 37Y1-UP IF3304NG-2 IN-FRAME OVERHAUL KIT - 8.0:1 CR Engine S/N 1RG1-UP, 37Y1852-UP AFA COMPLETE OVERHAUL KITS INCLUDE COMPLETE CYLINDER KITS (Liner, Liner Seals, Piston, Rings, Pins, Retainers), ROD BEARINGS, MAIN BEARINGS, COMPLETE GASKET SET. OH3304NG-1 OH3304NG-2 COMPLETE OVERHAUL KIT :1 CR Engine S/N A4E1-UP, S4E1-UP, 37Y1-UP COMPLETE OVERHAUL KIT - 8.0:1 CR Engine S/N 1RG1-UP, 37Y1852-UP AFA SUPER OVERHAUL KITS INCLUDE COMPLETE CYLINDER KITS (Liner, Liner Seals, Piston, Rings, Pins, Retainers), ROD BEARINGS, MAIN BEARINGS, COMPLETE GASKET SET, OIL COOLER, CAMSHAFT BEARINGS, THERMOSTATS, CAMSHAFT & LIFTERS. OH2654-4S OH2655-4S COMPLETE OVERHAUL KIT :1 CR Engine S/N A4E1-UP, S4E1-UP, 37Y1-UP COMPLETE OVERHAUL KIT - 8.0:1 CR Engine S/N 1RG1-UP, 37Y1852-UP G3306 Engines AFA IN-FRAME KITS INCLUDE COMPLETE CYLINDER KITS (Liner, Liner Seals, Piston, Rings, Pins, Retainers), ROD BEARINGS, MAIN BEARINGS, UPPER GASKET SET AND OIL PAN GASKET. IF3306NG-1 IN-FRAME OVERHAUL KIT :1 CR Engine S/N G6X1-UP, R6S1-UP, S6E1-UP, 7Y1-4278, 68D1-UP IF3306NG-2 IN-FRAME OVERHAUL KIT - 8.0:1 CR Engine S/N G6X1-UP, R6S1-UP, S6E1-UP, 3CF1-UP, 7Y438-UP, 68D1-UP AFA COMPLETE OVERHAUL KITS INCLUDE COMPLETE CYLINDER KITS (Liner, Liner Seals, Piston, Rings, Pins, Retainers), ROD BEARINGS, MAIN BEARINGS, COMPLETE GASKET SET. OH3306NG-1 COMPLETE OVERHAUL KIT :1 CR Engine S/N G6X1-UP, R6S1-UP, S6E1-UP, 7Y1-4278, 68D1-UP OH3306NG-2 COMPLETE OVERHAUL KIT - 8.0:1 CR Engine S/N G6X1-UP, R6S1-UP, S6E1-UP, 3CF1-UP, 7Y438-UP, 68D1-UP AFA SUPER OVERHAUL KITS INCLUDE COMPLETE CYLINDER KITS (Liner, Liner Seals, Piston, Rings, Pins, Retainers), ROD BEARINGS, MAIN BEARINGS, COMPLETE GASKET SET, OIL COOLER, CAMSHAFT BEARINGS, THERMOSTATS, CAMSHAFT & LIFTERS. OH2654-S OH2655-S COMPLETE OVERHAUL KIT :1 CR Engine S/N G6X1-UP, R6S1-UP, S6E1-UP, 7Y1-4278, 68D1-UP COMPLETE OVERHAUL KIT - 8.0:1 CR Engine S/N G6X1-UP, R6S1-UP, S6E1-UP, 3CF1-UP, 7Y438-UP, 68D1-UP 45

49 G3304 CATERPILLAR TABLE OF CONTENTS Page(s) Cylinder Block/Block de Cilindros Front Covers & Rear Housing/Delanteras Cubiertas y Trasera Vivienda Cylinder Head/Cabeza de Cilindros Crankshaft/Cigüeñal Camshaft, Cam Follower & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza Water Pump, Oil Cooler/Bomba de Agua, Refrigerador de Aceite Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite Fuel Components/Bomba de Combustible Ignition & Electrical Components/Encendido Y Componentes Eléctricos Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring

50 G3304 CATERPILLAR Cylinder Block/Block de Cilindros

51 G3304 CATERPILLAR Cylinder Block, & Gasket Sets/ Block de Cilindros, Juegos de Juntas Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B IN-FRAME & COMPLETE OVERHAUL KITS 00 IF3304NG-1 IN-FRAME OVERHAUL KIT 10.5: IF3304NG-2 IN-FRAME OVERHAUL KIT 8.0: OH3304NG-1 COMPLETE OVERHAUL KIT 10.5: OH3304NG-2 COMPLETE OVERHAUL KIT 8.0: OH2654-4S SUPER OVERHAUL KIT 10.5: OH2655-4S SUPER OVERHAUL KIT 8.0:1 1 1 AFA SPECIAL GASKET SETS 00 AFA-IFG3304NG IN-FRAME GASKET SET AFA-OHG3304NG COMPLETE OVERHAUL GASKET SET 1 1 OE STYLE GASKET SETS 00 6V2935 CYLINDER BLOCK & OIL PAN GSKT. SET (1RG1-UP) CYLINDER BLOCK & OIL PAN GSKT. SET (37Y1-UP) FRONT COVER & HOUSING KIT (1RG1-UP) FRONT COVER & HOUSING KIT (37Y1-UP) REAR COVER & HOUSING GSKT. KIT (37Y1-UP, 1RG1-UP) T9483 OIL COOLER GASKET SET (1RG1-UP) X8566 OIL COOLER GASKET SET (37Y1-UP) WATER PUMP GASKET KIT (37Y1-UP, 1RG1-UP) 1 BLOCK PARTS 01 7W7544 HEAD GASKET SPACER SHIM N4110 CAMSHAFT BEARING - FRONT M4046 CAMSHAFT BEARING - INTERMEDIATE S5496 O-RING SEAL * 7N8021 CYLINDER BLOCK PLATE M6213 PIPE PLUG - 1/4-18 NPT X M2894 WASHER,HARD M2250 GASKET * 9Y2991 BALANCE SHAFT BUSHING - NARROW * 9Y2992 BALANCE SHAFT BUSHING - WIDE S6045 OIL PAN PLATE GASKET S1963 OIL PAN GASKET M2894 WASHER,HARD (For Oil Pan Bolts) WS LINER W/SEALING RINGS LINER W/O SEALING RINGS P8768 LINER SEAL KIT B0645 EXPANSION PLUG in. dia A1162 GASKET H5921 FLYWHEEL HOUSING GASKET (to Block) 1 1 * New Number - Order when announced as available. 48

52 G3304 CATERPILLAR Front Covers & Rear Housing/Delanteras Cubiertas y Trasera Vivienda FLYWHEEL HOUSING REAR OF FRONT COVER 49

53 G3304 CATERPILLAR Front Covers & Rear Housing/ Delanteras Cubiertas y Trasera Vivienda Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B FRONT HOUSING 01 6N7887 HOUSING COVER GASKET F3106 O-RING SEAL - ACCESS COVER N0110 FRONT PLATE GASKET 1 03 * FRONT PLATE GASKET W3900 FRONT HOUSING GASKET 1 04 * FRONT HOUSING GASKET P0220 WATER PUMP COVER GASKET 1 REAR FLYWHEEL HOUSING 08 3B0645 EXPANSION PLUG in. dia A1162 DRAIN PLUG GASKET H5921 FLYWHEEL HOUSING GASKET 1 1 * New Number - Order when announced as available. 50

54 G3304 CATERPILLAR Cylinder Head/Cabeza de Cilindros

55 G3304 CATERPILLAR Cylinder Head/Cabeza de Cilindros Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B 00 8N4984 COMPLETE LOADED CYLINDER HEAD ASSY = SHORT VALVE AR AR 00 7W7504 COMPLETE LOADED CYLINDER HEAD ASSY = TALL VALVE AR AR FOR S/N: N4F1-UP; NFS1-UP; 37Y1020-UP; A4E1-UP; S4E1-UP 01 4P8915 CYLINDER HEAD GASKET W7490 VALVE, INTAKE (TALL) W7491 VALVE, EXHAUST (TALL) VALVE SEAT, INTAKE N1649 VALVE SEAT, EXHAUST Y7895 VALVE GUIDE (INTAKE & EXHAUST) (TALL) S7144 VALVE SPRING (INTAKE & EXHAUST) ROTOCOIL ASSY. (INT & EXH) A4429 VALVE LOCK (INTAKE & EXHAUST) N1743 SPARK PLUG ADAPTER S3206 O-RING SEAL N7174 SPARK PLUG ADAPTER WASHER Y1798 SEALING RING N8018 SEALING RING S5496 O-RING SEAL S1606 VALVE COVER GASKET - CORK S1606 VALVE COVER GASKET - CORK (2 req'd with TALL VALVES) * 8S1606R VALVE COVER GASKET - RUBBER Y1979 INTAKE MANIFOLD GASKET M4849 O-RING SEAL 1 1 FOR S/N: 1RG1-UP; 37Y P8915 CYLINDER HEAD GASKET W2621 VALVE, INTAKE (SHORT) W2877 VALVE, EXHAUST (SHORT) VALVE SEAT, INTAKE N1649 VALVE SEAT, EXHAUST W9176 VALVE GUIDE (INTAKE & EXHAUST) (S/N 37Y1-1019) VALVE GUIDE (INTAKE & EXHAUST) (S/N 1RG1-UP) S7144 VALVE SPRING (INTAKE & EXHAUST) ROTOCOIL ASSY. (INT & EXH) A4429 VALVE LOCK (INTAKE & EXHAUST) N1743 SPARK PLUG ADAPTER S3206 O-RING SEAL N7174 SPARK PLUG ADAPTER WASHER Y1798 SEALING RING N8018 SEALING RING S5496 O-RING SEAL S1606 VALVE COVER GASKET - CORK 1 16 * 8S1606R VALVE COVER GASKET - RUBBER Y1979 INTAKE MANIFOLD GASKET M4849 O-RING SEAL 1 1 * New Number - Order when announced as available. 52

56 G3304 CATERPILLAR Crankshaft/ Cigüeñal

57 G3304 CATERPILLAR Crankshaft/Cigüeñal Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B MAIN BEARING SETS MAIN BEARING SET - STD MAIN BEARING, PLAIN - STD THRUST WASHER inch N8225 MAIN BEARING, PLAIN N8226 MAIN BEARING, PLAIN N8227 MAIN BEARING, PLAIN * 4W MAIN BEARING, PLAIN ALL OTHER CRANKSHAFT PARTS 01 4N7692 CRANKSHAFT W/O GEAR N1984 CONNECTING ROD, NEW - TAPERED P9956 CONNECTING ROD BOLT S6348 CONNECTING ROD NUT N1985 PISTON PIN BUSHING (FOR 1 1/2" TAPERED RAD) CONNECTING ROD BEARING PAIR - STD N8221 CONNECTING ROD BEARING PAIR N8222 CONNECTING ROD BEARING PAIR N8223 CONNECTING ROD BEARING PAIR THRUST WASHER inch W0452 CRANKSHAFT SEAL (REAR) Y9895 CRANKSHAFT SEAL (FRONT) S6045 OIL PAN PLATE GASKET S1963 OIL PAN GASKET M2894 WASHER,HARD (For Oil Pan Bolts) P3858 REPAIR SLEEVE (REAR CRANKSHAFT) P3859 REPAIR SLEEVE (FRONT CRANKSHAFT) 1 1 * New Number - Order when announced as available. 54

58 G3304 CATERPILLAR Camshaft, Cam Follow er & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza

59 G3304 CATERPILLAR Camshaft, Cam Follower & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B 00 9Y1723 CAMSHAFT & LIFTER KIT C3862 CAMSHAFT W/O GEAR S3161 LIFTER S1491 LOCKPLATE M4448 O-RING SEAL

60 G3304 CATERPILLAR Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite

61 G3304 CATERPILLAR Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B WATER PUMP & PARTS WATER PUMP - HEAVY DUTY WATER PUMP - HEAVY DUTY (For UNDERGROUND MINING ENG.) THERMOSTAT DEGREES THERMOSTAT DEGREES N0944 THERMOSTAT HOUSING GASKET * 8N4485 DEARIATION VALVE F3106 O-RING SEAL WATER PUMP GASKET KIT (37Y1-UP, 1RG1-UP) 1 OIL COOLER & PARTS 08 7N0110 OIL COOLER S5409 OIL COOLER CORE GASKET P8118 O-RING SEAL P1155 O-RING SEAL M2894 WASHER, HARD N3841 COVER GASKET W4561 FILTER BASE TO COOLER GASKET T9483 OIL COOLER GASKET SET (1RG1-UP) X8566 OIL COOLER GASKET SET (37Y1-UP) 1 * New Number - Order when announced as available. 58

62 G3304 CATERPILLAR Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite

63 G3304 CATERPILLAR Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B OIL PUMP & OIL SYSTEM COMPONENTS 01 6i1343 OIL PUMP - SINGLE STAGE PUMP i1346 OIL PUMP - DOUBLE STAGE PUMP S6511 BUSHING M2894 WASHER, HARD J2036 O-RING SEAL M5407 GASKET M0904 GASKET O-RING SEAL F7590 GASKET M2894 WASHER, HARD S8874 GASKET LOCK PLATE M6213 PIPE PLUG (1/4-18 NPT X.75 OR 19.0 MM HIGH)

64 G3304 CATERPILLAR Fuel Components/Bomba de Combustible GOVERNOR ASSY GOVERNOR ASSY 19 61

65 G3304 CATERPILLAR Fuel Components/Bomba de Combustible Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B CARBURETOR & COMPONENTS 8N5734 Group - 7E1814 Carburetor 01 6L8044 GASKET S6735 CARBURETOR GASKET L1585 GASKET Group Carburetor Group Carburetor 01 6L8044 GASKET S6735 CARBURETOR GASKET L1585 GASKET 1 FUEL PUMP & COMPONENTS 04 7N9203 GOVERNOR GASKET L3528 GASKET J7354 O-RING SEAL F3106 O-RING SEAL X7378 O-RING SEAL 1 GOVERNOR & COMPONENTS 12 8L8883 THROTTLE SHAFT P8697 GOVERNOR GASKET M8403 GOVERNOR SPRING GUIDE P8763 GASKET P9757 O-RING SEAL M6293 GASKET LOCK PLATE M7219 NEEDLE BEARING N9339 GOVERNOR HOUSING GASKET S4671 OIL SEAL L8991 COVER GASKET 1 62

66 G3304 CATERPILLAR Ignition & Electrical Components/ Encendido Y Componentes Eléctricos

67 G3304 CATERPILLAR Ignition & Electrical Components/ Encendido Y Componentes Eléctricos Ref Part Number/ Número de Parte Description/Descripción G3304 G3304B IGNITION & ELECTRICAL COMPONENTS 01 7W2479 SPARK PLUG WIRE M8157 O-RING SEAL L5270 MAGNETO GASKET 1 NR 04 3B1915 BOLT 1 NR 05 5M2894 WASHER, HARD M5248 O-RING SEAL M5253 O-RING SEAL

68 G3304 CATERPILLAR Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring 65

69 G3304 CATERPILLAR Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring Cyliner Kit/ Cilindro Kit Piston/Pistón Liner/ Camisa Piston Rings/Jgo. Anillos Piston Pin/Perno Pistón Piston Pin Retainers/Seguros P/Pistón Liner Sealing Ring/Liner anillo de sellado AFA-LK2654 4P P2654-RS 7N9804 9H4015 5P8768 AFA-LK2655 4P P2654-RS 7N9804 9H4015 5P8768 Note: Cylinder kits include products mentioned are the shaded area/ Nota: Los Kits de Cilindro mencionados incluyen los productos que se encuentran con el área sombreada. Piston Pin Piston Piston Kit/Kit Piston Rings/Jgo. Retainers/ Piston/Pistón Pin/Perno Comment/Comentario Pistón Anillos Seguros Pistón P/Pistón AFA-PK2654 4P2654 7N9804 4P2654-RS 9H :1 C.R. AFA-PK2655 4P2655 7N9804 4P2654-RS 9H :1 C.R. Note: Piston kits include products mentioned are the shaded area/ Nota: Los Kits de Piston mencionados incluyen los productos que se encuentran con el área sombreada. Piston/Pistón 4P2654 4P2654 Comment/Comentario 10.5:1 C.R. 8.0:1 C.R. Liner Kit/Kit de Camisa Liner/Camisa Liner Sealing Ring/Liner anillo de sellado Liner Sealing Ring/Liner anillo de sellado WS (1) 2W6134 (3) 5S6670 Comment/Comentario Note: Liner kits include products mentioned are the shaded area/ Nota: Los Kits de camisa mencionados incluyen los productos que se encuentran con el área sombreada. Piston Rings/Jgo. Anillos 4P2654-RS Compression Ring/Anillo de Compresión Compression Oil Control Ring/Anillo de Ring/Anillo Aceite Compresión Comment/Comentario Use with all pistons Note: Piston Ring Sets include products mentioned are the shaded area/ Nota: Los juegos de anillos mencionados incluyen los productos que se encuentran con el área sombreada. * New Number - Order when announced as available. 66

70 AFA GASKET TECHNOLOGY Quality Materials Quality Engineering Quality Manufacturing Sealing Products are where we started in the Heavy Duty business in 1987 and are still a hallmark of execllence for us. These are some examples of AFA Technology working for you. TM Graphite Head Gaskets, today, are subject to higher heats and pressures created by newer high performance, multi-fuel configurations. Graphite is particularly well suited to this difficult environment due to its inertness, thermal resistance and conformability. Fire rings provide the combustion seal and fluoroelastomer inserts seal fluid passages. Multi-Layer-Steel (MLS) head gaskets (not shown) have been developed in response to advancing engine technology and sealing demands. They consist of a number of layers of embossed elastomer-coated steel and stainless steel fillers. MLS designs take into account scrubbing and are able to maintain excellent sealing even in cases of extreme lateral head/block motion. Molded Rubber-Edge Steel gaskets combine a stamped steel support framework for rigidity along with an exclusive, technologically advanced rubber-edge molding process. Edge-bonded gaskets are used in areas of structural stress and high loading where the steel frame provides mechanical integrity while the rubber edge provides superior sealing. Molded silicone rubber Valve cover and oil pan gaskets are the material of choice for today s diesel engines. Seamless construction and molded-in, redundant sealing beads combined with steel compression limiters assure a 1,000,000 mile seal every time. AFA crankshaft seals utilize Polytetrafluoroethylene (PTFE), a high molecular weight compound consisting of carbon and fluorine. This material has the lowest coefficient of friction against the carbon steel crankshaft. Whole Engine Sealing Solutions offered by AFA range from: Soft gaskets only made from Interface Solutions TM premium gasket materials, resulting in robust solutions that satisfy the most stringent requirements. Technologically advanced, molded, rubber-edge steel Stamped steel with embossed beading * Steel/graphite laminate And other application-specific materials. O-rings are molded in a variety of specially formulated, high performance rubber compounds engineered to meet each application s particular sealing needs.

71 G3306 CATERPILLAR TABLE OF CONTENTS Page(s) Cylinder Block, & Gasket Sets/ Block de Cilindros, Juegos de Juntas Front Covers & Rear Housing/Delanteras Cubiertas y Trasera Vivienda Cylinder Head/Cabeza de Cilindros Crankshaft/Cigüeñal Camshaft, Cam Follower & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite Aftercooler & Components/ Radiador de salida y Componentes Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite Fuel Components/Bomba de Combustible TurboCharger/Turbo Cargador Ignition & Electrical Components/ Encendido Y Componentes Eléctricos Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring

72 G3306 CATERPILLAR Cylinder Block/Block de Cilindros

73 G3306 CATERPILLAR Cylinder Block, & Gasket Sets/ Block de Cilindros, Juegos de Juntas Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B IN-FRAME & COMPLETE OVERHAUL KITS 00 IF3306NG-1 IN-FRAME OVERHAUL KIT 10.5: IF3306NG-2 IN-FRAME OVERHAUL KIT 8.0: OH3306NG-1 COMPLETE OVERHAUL KIT 10.5: OH3306NG-2 COMPLETE OVERHAUL KIT 8.0: OH2654-S SUPER OVERHAUL KIT 10.5: OH2655-S SUPER OVERHAUL KIT 8.0:1 1 1 AFA SPECIAL GASKET SETS 00 AFA-HS3306NG HEAD GASKET SET (S/N R6S1-UP, S6E1-UP) 1 00 AFA-IFG3306NG IN-FRAME GASKET SET AFA-OH3306NG COMPLETE OVERHAUL GASKET SET 1 1 OE STYLE GASKET SETS 00 9S4001 COMPLETE OVERHAUL GASKET SET (S/N 68D1-UP) V2981 HEAD GASKET SET (S/N 3CF1-UP, 7Y1-UP) S4000 HEAD GASKET SET (S/N 68D1-UP) HEAD GASKET SET (S/N R6S1-UP, S6E1-UP) HEAD GASKET SET (S/N G6X1-UP) P9099 CYLINDER BLOCK & OIL PAN GASKET SET (3CF1-UP) CYLINDER BLOCK & OIL PAN GASKET SET (R6S1-UP, S6E--UP) CYLINDER BLOCK & OIL PAN GASKET SET (7Y1-UP) 1 BLOCK PARTS HEAD GASKET SPACER SHIM (CHECK ENGINE S/N) N4110 CAMSHAFT BEARING - FRONT M4046 CAMSHAFT BEARING - INTERMEDIATE F7062 COPPER WASHER * 7N7998 CYLINDER BLOCK PLATE (CHECK ENGINE S/N) M6213 PIPE PLUG - 1/4-18 NPT X M2894 WASHER,HARD M6480 GASKET S8055 GASKET H7869 COVER PLATE GASKET OIL PAN PLATE GASKET OIL PAN GASKET M2894 WASHER,HARD (For Oil Pan Bolts) WS LINER W/SEALING RINGS LINER W/O SEALING RINGS P8768 LINER SEAL KIT B0645 EXPANSION PLUG in. dia A1162 GASKET H5921 FLYWHEEL HOUSING GASKET (to Block) W7621 DIP STICK TUBE GASKET 1 1 * New Number - Order when announced as available. 70

74 G3306 CATERPILLAR Front Covers & Rear Housing/Delanteras Cubiertas y Trasera Vivienda FLYWHEEL HOUSING 71

75 G3306 CATERPILLAR Front Covers & Rear Housing/ Delanteras Cubiertas y Trasera Vivienda Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B FRONT HOUSING 01 6N7887 HOUSING COVER GASKET F3106 O-RING SEAL - ACCESS COVER N0110 FRONT PLATE GASKET 1 03 * FRONT PLATE GASKET W3900 FRONT HOUSING GASKET 1 04 * FRONT HOUSING GASKET 1 REAR FLYWHEEL HOUSING 08 3B0645 EXPANSION PLUG in. dia A1162 DRAIN PLUG GASKET H5921 FLYWHEEL HOUSING GASKET M6213 PIPE PLUG - 1/4-18 NPT X H7869 COVER PLATE GASKET 1 1 OE STYLE GASKET SETS 00 * FRONT COVER & HOUSING GASKET KIT (G6X1-UP) 1 00 * FRONT COVER & HOUSING GASKET KIT (R6S1-UP, S6E1-UP) FRONT COVER & HOUSING GASKET KIT (3CF1-UP, 7Y1-UP) REAR COVER & HOUSING GSKT. KIT (3CF1-UP) V2982 REAR COVER & HOUSING GSKT. KIT (R6S1-UP, S6E1-UP) V2983 REAR COVER & HOUSING GSKT. KIT (7Y1-UP) 1 72

76 G3306 CATERPILLAR Cylinder Head/ Cabeza de Cilindros BREATHER CAP

77 G3306 CATERPILLAR Cylinder Head/Cabeza de Cilindros Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B 00 9Y3640 COMPLETE LOADED CYLINDER HEAD ASSY = SHORT VALVE AR AR 00 7W8406 COMPLETE LOADED CYLINDER HEAD ASSY = TALL VALVE AR AR FOR S/N: 3CF1-UP; 7Y1-2078; 7Y4279-Up; G6X1-UP; R6S1-UP; S6E1-UP CYLINDER HEAD GASKET W2621 VALVE, INTAKE (SHORT) W1670 VALVE, INTAKE (SHORT) (S/N 3CF1-UP) W2877 VALVE, EXHAUST (SHORT) VALVE SEAT, INTAKE S7218 VALVE SEAT, INTAKE (S/N 3CF1-UP) N1649 VALVE SEAT, EXHAUST W5321 VALVE SEAT, EXHAUST (S/N 3CF1-UP) W9176 VALVE GUIDE (INTAKE & EXHAUST) (S/N 7Y1-2078) E1551 VALVE GUIDE (INTAKE & EXHAUST) (S/N 7Y4279-UP; G6X1-UP) VALVE GUIDE (INTAKE & EXHAUST) (S/N 3CF1-UP) S7144 VALVE SPRING (INTAKE & EXHAUST) ROTOCOIL ASSY. (INT & EXH) A4429 VALVE LOCK (INTAKE & EXHAUST) N1743 SPARK PLUG ADAPTER S3206 O-RING SEAL N7174 SPARK PLUG ADAPTER WASHER Y1798 SEALING RING N8018 SEALING RING S5496 O-RING SEAL S1605 VALVE COVER GASKET - CORK VALVE COVER GASKET - RUBBER 1 1 FOR S/N: 7Y CYLINDER HEAD GASKET W7490 VALVE, INTAKE (TALL) W7491 VALVE, EXHAUST (TALL) VALVE SEAT, INTAKE N1649 VALVE SEAT, EXHAUST Y7895 VALVE GUIDE (INTAKE & EXHAUST) (TALL) S7144 VALVE SPRING (INTAKE & EXHAUST) ROTOCOIL ASSY. (INT & EXH) A4429 VALVE LOCK (INTAKE & EXHAUST) N1743 SPARK PLUG ADAPTER S3206 O-RING SEAL N7174 SPARK PLUG ADAPTER WASHER Y1798 SEALING RING N8018 SEALING RING S5496 O-RING SEAL S1605 VALVE COVER GASKET - CORK S1605 VALVE COVER GASKET - CORK (2 req'd with TALL VALVES) VALVE COVER GASKET - RUBBER S6410 INTAKE MANIFOLD GASKET M4849 O-RING SEAL M2894 WASHER,HARD S6735 COVER PLATE GASKET L6580 GASKET M4897 O-RING SEAL H2046 O-RING SEAL Y1979 EXHAUST MANIFOLD GASKET 3 3 * New Number - Order when announced as available. 74

78 G3306 CATERPILLAR Crankshaft/ Cigüeñal

79 G3306 CATERPILLAR Crankshaft/Cigüeñal Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B MAIN BEARING SETS MAIN BEARING SET - STD MAIN BEARING, PLAIN - STD THRUST WASHER inch N8225 MAIN BEARING, PLAIN N8226 MAIN BEARING, PLAIN N8227 MAIN BEARING, PLAIN * 4W MAIN BEARING, PLAIN ALL OTHER CRANKSHAFT PARTS 01 2W7458 CRANKSHAFT W/O GEAR N1984 CONNECTING ROD, NEW - TAPERED P9956 CONNECTING ROD BOLT S6348 CONNECTING ROD NUT N1985 PISTON PIN BUSHING (FOR 1 1/2" TAPERED RAD) CONNECTING ROD BEARING PAIR - STD N8221 CONNECTING ROD BEARING PAIR N8222 CONNECTING ROD BEARING PAIR N8223 CONNECTING ROD BEARING PAIR THRUST WASHER inch W0452 CRANKSHAFT SEAL (REAR) Y9895 CRANKSHAFT SEAL (FRONT) OIL PAN PLATE GASKET OIL PAN GASKET M2894 WASHER,HARD (For Oil Pan Bolts) P3858 REPAIR SLEEVE (REAR CRANKSHAFT) P3859 REPAIR SLEEVE (FRONT CRANKSHAFT) 1 1 * New Number - Order when announced as available. 76

80 G3306 CATERPILLAR Camshaft, Cam Follow er & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza

81 G3306 CATERPILLAR Camshaft, Cam Follower & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B CAMSHAFT & COMPONENTS 00 4P2942 CAMSHAFT & LIFTER KIT C3864 CAMSHAFT W/O GEAR S3161 LIFTER S1491 LOCKPLATE M4448 O-RING SEAL * 5S5918 PUSH ROD TIMING GEARS & COMPONENTS 06 5S7630 GOVERNOR DRIVE IDLER BUSHING OIL PUMP IDLER BUSHING

82 G3306 CATERPILLAR Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite

83 G3306 CATERPILLAR Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B WATER PUMP & PARTS WATER PUMP - HEAVY DUTY WATER PUMP - HEAVY DUTY (For UNDERGROUND MINING ENG.) THERMOSTAT DEGREES THERMOSTAT DEGREES N0944 THERMOSTAT HOUSING GASKET * 8N4485 DEARIATION VALVE F3106 O-RING SEAL M6213 PIPE PLUG (1/4-18 NPT X.75 OR 19.0 MM HIGH) 2 OE STYLE GASKET SETS WATER PUMP GASKET KIT (3CF1-UP, 7Y1-UP, R6S1-UP, S6E1-UP) WATER PUMP GASKET KIT (G6X1-UP) 1 OIL COOLER & PARTS 08 7N0110 OIL COOLER S5409 OIL COOLER CORE GASKET P8118 O-RING SEAL P1155 O-RING SEAL M2894 WASHER, HARD N3841 COVER GASKET W4561 FILTER BASE TO COOLER GASKET 1 1 OE STYLE GASKET SETS 00 6V5979 OIL COOLER GASKET SET (3CF1-UP) X6560 OIL COOLER GASKET SET (R6S1-UP, S6E1-UP) OIL COOLER GASKET SET (G6X1-UP) OIL COOLER GASKET SET (7Y1-UP) 1 * New Number - Order when announced as available. 80

84 G3306 CATERPILLAR Aftercooler & Components/ Radiador de salida y Componentes

85 G3306 CATERPILLAR Aftercooler & Components/ Radiador de salida y Componentes Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B AFTERCOOLER & COMPONENTS 01 9L5908 GASKET L1648 O-RING SEAL W3679 ADAPTER GASKET M2894 WASHER, HARD S6735 GASKET M6213 PIPE PLUG (1/4-18 NPT X.75 OR 19.0 MM HIGH) OE STYLE GASKET SETS 00 5P8772 AFTERCOOLER GASKET SET (3CF1-UP) V1279 AFTERCOOLER GASKET SET (7Y1-UP) 1 * New Number - Order when announced as available. 82

86 G3306 CATERPILLAR Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite

87 G3306 CATERPILLAR Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B OIL PUMP & OIL SYSTEM COMPONENTS 01 6i1343 OIL PUMP - SINGLE STAGE PUMP i1346 OIL PUMP - DOUBLE STAGE PUMP S6511 BUSHING M2894 WASHER, HARD J2036 O-RING SEAL M5407 GASKET M0904 GASKET O-RING SEAL F7590 GASKET M2894 WASHER, HARD S8874 GASKET LOCK PLATE M6213 PIPE PLUG (1/4-18 NPT X.75 OR 19.0 MM HIGH) 1 1 OIL FILLER CAP COMPONENTS 12 2P2720 GASKET M2894 WASHER, HARD

88 G3306 CATERPILLAR Fuel Components/Bomba de Combustible GOVERNOR ASSY GOVERNOR ASSY 19 85

89 G3306 CATERPILLAR Fuel Components/Bomba de Combustible Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B CARBURETOR & COMPONENTS 7N5901, 7N5902 Groups - 7N6508 Carburetor 01 6L8044 GASKET L9691 CARBURETOR GASKET (To Aftercooler)(7N5901 Carb Group) S6735 CARBURETOR GASKET (To Aftercooler)(7N5902 Carb Group) L1585 GASKET , Groups Carburetor 01 6L8044 GASKET L9691 CARBURETOR GASKET (To Aftercooler)( Carb Group) S6735 CARBURETOR GASKET (To Aftercooler)( Carb Group) L1585 GASKET 1 GOVERNOR & COMPONENTS 04 7N9203 GOVERNOR GASKET L3528 GASKET J7354 O-RING SEAL F3106 O-RING SEAL X7378 O-RING SEAL L8883 THROTTLE SHAFT P8697 GOVERNOR GASKET M8403 GOVERNOR SPRING GUIDE P8763 GASKET P9757 O-RING SEAL M6293 BOLT LOCK PLATE M7219 NEEDLE BEARING N9339 GOVERNOR HOUSING GASKET S4671 OIL SEAL L8991 COVER GASKET F4159 BOLT LOCK PLATE 1 86

90 G3306 CATERPILLAR TurboCharger/Turbo Cargador

91 G3306 CATERPILLAR TurboCharger/Turbo Cargador Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B TURBOCHARGER & COMPONENTS 01 2N2766 NUT S4295 MOUNTING GASKET N7273 MOUNTING GASKET (elbow to Turbocharger) M2894 WASHER, HARD L4716 GASKET (for 4" Exhaust Pipe) L8484 GASKET (for 5" Exhaust Pipe) N8875 GASKET M5253 O-RING SEAL N7559 GASKET N7628 GASKET M4849 O-RING SEAL M2894 WASHER, HARD M5248 O-RING SEAL 1 OE STYLE GASKET SETS 00 6V1278 TURBOCHARGER INSTALLATION GASKET SET (7Y1-UP) C0613 TURBOCHARGER INSTALLATION GASKET SET (3CF1-UP) 1 88

92 G3306 CATERPILLAR Ignition & Electrical Components/ Encendido Y Componentes Eléctricos

93 G3306 CATERPILLAR Ignition & Electrical Components/ Encendido Y Componentes Eléctricos Ref Part Number/ Número de Parte Description/Descripción G3306 G3306B IGNITION & ELECTRICAL COMPONENTS 01 7W2479 SPARK PLUG WIRE M8157 O-RING SEAL L5270 MAGNETO GASKET 1 NR 04 3B1915 BOLT 1 NR 05 5M2894 WASHER, HARD M5248 O-RING SEAL M5253 O-RING SEAL

94 G3306 CATERPILLAR Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring 91

95 G3306 CATERPILLAR Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring Cyliner Kit/ Cilindro Kit Piston/Pistón Liner/ Camisa Piston Rings/Jgo. Anillos Piston Pin/Perno Pistón Piston Pin Retainers/Seguros P/Pistón Liner Sealing Ring/Liner anillo de sellado AFA-LK2654 4P P2654-RS 7N9804 9H4015 5P8768 AFA-LK2655 4P P2654-RS 7N9804 9H4015 5P8768 Note: Cylinder kits include products mentioned are the shaded area/ Nota: Los Kits de Cilindro mencionados incluyen los productos que se encuentran con el área sombreada. Piston Pin Piston Piston Kit/Kit Piston Rings/Jgo. Retainers/ Piston/Pistón Pin/Perno Comment/Comentario Pistón Anillos Seguros Pistón P/Pistón AFA-PK2654 4P2654 7N9804 4P2654-RS 9H :1 C.R. AFA-PK2655 4P2655 7N9804 4P2654-RS 9H :1 C.R. Note: Piston kits include products mentioned are the shaded area/ Nota: Los Kits de Piston mencionados incluyen los productos que se encuentran con el área sombreada. Piston/Pistón 4P2654 4P2654 Comment/Comentario 10.5:1 C.R. 8.0:1 C.R. Liner Kit/Kit de Camisa Liner/Camisa Liner Sealing Ring/Liner anillo de sellado Liner Sealing Ring/Liner anillo de sellado WS (1) 2W6134 (3) 5S6670 Comment/Comentario Note: Liner kits include products mentioned are the shaded area/ Nota: Los Kits de camisa mencionados incluyen los productos que se encuentran con el área sombreada. Piston Rings/Jgo. Anillos 4P2654-RS Compression Ring/Anillo de Compresión Compression Oil Control Ring/Anillo de Ring/Anillo Aceite Compresión Comment/Comentario Use with all pistons Note: Piston Ring Sets include products mentioned are the shaded area/ Nota: Los juegos de anillos mencionados incluyen los productos que se encuentran con el área sombreada. * New Number - Order when announced as available. 92

96 AFA MULTI-LAYER GRAPHITE Tough Technology Where It s Needed Most... Steel Core, Graphite Clad Sealing Solutions GRAPHITE SEALING LAYER Made from exfoliated graphite flake with no binder or resins - 99% pure carbon. Capable of withstanding temperatures in excess of 5000 F, its corrosion resistance and superior elasticity make this is the ideal material for surface sealing the head to the block. 3 2 CINCH-PLATE LOCKING LAYER Hundreds of tangs penetrate the graphite facing, and under high pressure, bend and lock the sealing layer permanently in place. 3 RIGID STEEL CORE Solid steel core protects these head gaskets from damage and assures a sealing surface as smooth and flat as the newly machined parts it seals. AFA MULTI-LAYER GRAPHITE The Best Material Money Can Buy... AFA The Best Engineering and Manufacturing in the Industry AFA is on the cutting edge of gasket engineering and manufacturing. Only the highest quality materials are specified, tested and quality controlled throughout the production process. The entire gasket is designed to perfectly fit each application. Tolerances meet or exceed OE specifications. Based on actual field evaluation and customer input, our products frequently contain features not found in the OE product, features that solve unexpected installation and performance issues.

97 G3406 CATERPILLAR TABLE OF CONTENTS Page(s) Cylinder Block, & Gasket Sets/ Block de Cilindros, Juegos de Juntas Front Covers & Rear Housing/Delanteras Cubiertas y Trasera Vivienda Cylinder Head/Cabeza de Cilindros Crankshaft/Cigüeñal Camshaft, Cam Follower & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite OE Style Gasket Sets/ OE Juegos De Juntas Estilo OE Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite TurboCharger/Turbo Cargador Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring

98 G3406 CATERPILLAR Cylinder Block/Block de Cilindros

99 G3406 CATERPILLAR Cylinder Block, & Gasket Sets/ Block de Cilindros, Juegos de Juntas Ref Part Number/ Número de Parte Description/Descripción IN-FRAME & COMPLETE OVERHAUL KITS G CALL US In-Frame/Complete Overhaul Kits - THERE ARE TOO MANY COMBINATIONS OF PARTS BASED ON ENGINE SERIAL NUMBERS TO CREATE A PRE-MADE ENGINE KIT FOR THESE ENGINES. PLEASE CALL FOR A CUSTOM ENGINE KIT FOR YOUR PARTICULAR ENGINE. 1 AFA SPECIAL GASKET SETS 00 AFA-HS3406NG HEAD GASKET SET 1 OE STYLE GASKET SETS SEE PAGES IN THE BACK OF THIS SECTION BLOCK PARTS 01 * 6i2981 HEAD GASKET SPACER SHIM (CHECK ENGINE S/N) N0685 CAMSHAFT BEARING - 1" Wide N6658 CAMSHAFT BEARING - 1.3" Wide W4990 PISTON COOLING NOZZLE S5496 O-RING SEAL W6081 GASKET M9780 O-RING SEAL K1388 O-RING SEAL M9780 O-RING SEAL E6747 O-RING SEAL N1151 OIL PAN GASKET (puzzle design) 11 4N OIL PAN GASKET (one-piece design) WS LINER KIT W/SEALING RINGS LINER W/O SEALING RINGS CYL. LINER SEALING RING KIT CYL. LINER SEALING RING KIT LINER SEALING RING LINER SEALING RING LINER SEALING RING L5854 BAND FILLER SEAL 1 * New Number - Order when announced as available. 96

100 G3406 CATERPILLAR Front Covers & Rear Housing/Delanteras Cubiertas y Trasera Vivienda FLYWHEEL HOUSING 14 97

101 G3406 CATERPILLAR Front Covers & Rear Housing/ Delanteras Cubiertas y Trasera Vivienda Ref Part Number/ Número de Parte Description/Descripción G3406 FRONT HOUSING FRONT HOUSING GASKET FRONT COVER GASKET H6145 SEALING GASKET M2894 WASHER, HARD B2250 COPPER WASHER K0360 O-RING SEAL S4182 PLUG J7354 O-RING SEAL W1898 ACCESSORY DRIVE GASKET 1 10 * O-RING SEAL 2 REAR FLYWHEEL HOUSING FLYWHEEL HOUSING GASKET (4FD1-4FD377) FLYWHEEL HOUSING GASKET (4FD377-UP) M2894 WASHER, HARD M6213 PIPE PLUG A1162 DRAIN PLUG GASKET 5 98

102 G3406 CATERPILLAR Cylinder Head/ Cabeza de Cilindros

103 G3406 CATERPILLAR Cylinder Head/Cabeza de Cilindros Ref Part Number/ Número de Parte Description/Descripción G N1300 COMPLETE LOADED CYLINDER HEAD ASSY = 3406A AR 00 7W2203 COMPLETE LOADED CYLINDER HEAD ASSY = 3406B AR COMPLETE LOADED CYLINDER HEAD ASSY = 3406C AR FOR 4FD A4429 VALVE KEEPER * 6N7154 ROTOCOIL N5906 VALVE SPRING W5374 INTAKE VALVE W2443 EXHAUST VALVE W4325 INTAKE VALVE SEAT N5893 EXHAUST VALVE SEAT INTAKE & EXHAUST VALVE GUIDE 24 FOR 4FD A4429 VALVE KEEPER * 6N7175 ROTOCOIL N5906 VALVE SPRING INTAKE VALVE EXHAUST VALVE i4019 INTAKE VALVE SEAT EXHAUST VALVE SEAT INTAKE & EXHAUST VALVE GUIDE 24 FOR 4FD A4429 VALVE KEEPER * 6N7175 ROTOCOIL N5906 VALVE SPRING INTAKE VALVE EXHAUST VALVE INTAKE VALVE SEAT EXHAUST VALVE SEAT INTAKE & EXHAUST VALVE GUIDE 24 FOR 4FD A4429 VALVE KEEPER * 6N7175 ROTOCOIL N5906 VALVE SPRING INTAKE VALVE EXHAUST VALVE INTAKE VALVE SEAT EXHAUST VALVE SEAT INTAKE & EXHAUST VALVE GUIDE 24 * New Number - Order when announced as available. 100

104 G3406 CATERPILLAR Cylinder Head/Cabeza de Cilindros A

105 G3406 CATERPILLAR Cylinder Head/Cabeza de Cilindros Ref Part Number/ Número de Parte Description/Descripción G3406 FOR 4FD2646-UP 01 2A4429 VALVE KEEPER * 6N7175 ROTOCOIL N5906 VALVE SPRING INTAKE VALVE EXHAUST VALVE INTAKE VALVE SEAT EXHAUST VALVE SEAT INTAKE & EXHAUST VALVE GUIDE 24 FOR 4FD3013-UP (TALL HEAD) 01 2A4429 VALVE KEEPER * 6N7175 ROTOCOIL N5906 VALVE SPRING INTAKE VALVE EXHAUST VALVE INTAKE VALVE SEAT EXHAUST VALVE SEAT INTAKE VALVE GUIDE 12 08A EXHAUST VALVE GUIDE 12 OTHER CYLINDER HEAD COMPONENTS 09 3E6772 WATER SEAL i3066 CYLINDER HEAD GASKET 6 10 * CYLINDER HEAD GASKET (4FD2646-UP) S2251 O-RING SEAL (use w/ ) O-RING SEAL (use w/ ) 6 12 * SPARK PLUG ADAPTER (4FD1-3012) 6 12 * SPARK PLUG ADAPTER (4FD3013-UP) N7174 SPARK PLUG ADAPTER WASHER P ROCKER COVER GASKET 2 * New Number - Order when announced as available. 102

106 G3406 CATERPILLAR Crankshaft/ Cigüeñal

107 G3406 CATERPILLAR Crankshaft/Cigüeñal Ref Part Number/ Número de Parte Description/Descripción G3406 MAIN BEARING SETS 10 ~ MAIN BEARING, PLAIN - STD W5698 MAIN BEARING, PLAIN W5699 MAIN BEARING, PLAIN THRUST WASHER 2 ALL OTHER CRANKSHAFT PARTS 01 7C4859 Crankshaft w/o Gear (S/N 5NW) (4FD1-238) I1453 Crankshaft w/o Gear (S/N 5NW) (4FD239-Up) 1 02 NA CONNECTING ROD, NEW - TAPERED N8942 CONNECTING ROD BOLT L3441 CONNECTING ROD NUT P8495 PISTON PIN BUSHING (FOR 1.855" Long TAPERED RAD) CONNECTING ROD BEARING PAIR - STD (4FD1-238) W5702 CONNECTING ROD BEARING PAIR (4FD1-238) W5703 CONNECTING ROD BEARING PAIR (4FD1-238) CONNECTING ROD BEARING PAIR - STD (S/N 5NW)(S/N 4FD239-Up) E0558 CONNECTING ROD BEARING PAIR (S/N 5NW)(S/N 4FD239-Up) E0559 CONNECTING ROD BEARING PAIR (S/N 5NW)(S/N 4FD239-Up) THRUST WASHER CRANKSHAFT SEAL (REAR) CRANKSHAFT SEAL (FRONT) N1151 OIL PAN GASKET (puzzle design) N OIL PAN GASKET (one-piece design) 1 * New Number - Order when announced as available. 104

108 G3406 CATERPILLAR Camshaft, Cam Follow er & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza

109 G3406 CATERPILLAR Camshaft, Cam Follower & Accessory Drive/ Árbol de Levas, Seguidores de Levas & Accesorios de Toma de Fuerza Ref Part Number/ Número de Parte Description/Descripción G3406 CAMSHAFT & COMPONENTS 01 * 8N9245 CAMSHAFT W/O GEAR (4FD1-240) LIFTER (4FD1-279) LIFTER (4FD280-UP) * 4W5998 PUSH ROD

110 G3406 CATERPILLAR Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite

111 G3406 CATERPILLAR Water Pump, Oil Cooler/ Bomba de Agua, Refrigerador de Aceite Ref Part Number/ Número de Parte Description/Descripción G3406 WATER PUMP & PARTS 01 ^ Kit, Water Pump Rebuild (Two Ball Bearings) 1 Above Kit Contains The Following Nine Items 8C3100 Seal, Oil 1 9M6527 Washer, Hard 1 0S1591 Bolt (3/8"-16X1.5") Seal, Coolant 1 4N1400 Filter, Water 1 4N5834 Filter, Water 1 1B3867 Bearing, Water Pump 1 2L5271 Bearing, Water Pump Shaft, Water Pump 1 01 ^ Kit, Water Pump Rebuild (One Double Roller Bearing) 1 Above Kit Contains The Following Eight Items 8C3100 Seal, Oil 1 9M6527 Washer, Hard 1 0S1591 Bolt (3/8"-16X1.5") 1 5S0581 Washer, Hard Seal, Coolant Filter, Water Bearing, Water Pump Shaft, Water Pump 1 01 ^ Kit, Water Pump Rebuild (One Double Roller Bearing) 1 Above Kit Contains The Following Nine Items Seal, Oil 1 9M6527 Washer, Hard 1 5S0581 Washer, Hard Seal, Coolant Filter, Water (Not Sold Separately) Filter, Water (Not Sold Separately) Bearing, Water Pump Retainer, Water Pump Shaft, Water Pump W4011 THERMOSTAT DEGREES THERMOSTAT DEGREES THERMOSTAT DEGREES N1156 THERMOSTAT HOUSING GASKET C0307 THERMOSTAT HOUSING OUTLET GASKET M6213 PIPE PLUG (1/4-18 NPT X.75 OR 19.0 MM HIGH) S9643 THERMOSTAT SEALING RING 1 OIL COOLER & PARTS 08 7C3039 OIL COOLER OIL COOLER O-RING SEAL 2 * New Number - Order when announced as available. 108

112 G3406 CATERPILLAR OE STYLE GASKET SETS/ JUEGOS DE JUNTAS ESTILO OE Ref Part Number/ Número de Parte Description/Descripción G3406 OE STYLE GASKET SETS The Following Groups Are For Engine S/N 4FD209 - Up Arr. 4P0873 3E4326 Gasket Group, Central & Oil Pan Gasket Group, Front Structure Gasket Group, Oil Cooler & Lines Gasket Group, Rear Structure 1 7X7657 Gasket Group, Cylinder Head 1 The Following Groups Are For Engine S/N 4FD1 - Up Arr. 7W7194 And Engine S/N 4FD306 - Up Arr. 6I2078, 6I Gasket Group, Water Pump 1 3E7493 Gasket Group, Central & Oil Pan Gasket Group, Front Structure Gasket Group, Oil Cooler & Lines Gasket Group, Rear Structure 1 7X7657 Gasket Group, Cylinder Head 1 The Following Groups Are For Engine S/N 4FD369 - Up Arr , , Gasket Group, Water Pump Gasket Group, Central & Oil Pan Gasket Group, Front Structure Gasket Group, Oil Cooler & Lines Gasket Group, Rear Structure 1 7X7657 Gasket Group, Cylinder Head 1 The Following Groups Are For Engine S/N 4FD369 - Up Arr Gasket Group, Water Pump Gasket Group, Central & Oil Pan Gasket Group, Front Structure Gasket Group, Oil Cooler & Lines Gasket Group, Rear Structure 1 7X7657 Gasket Group, Cylinder Head 1 * New Number - Order when announced as available. 109

113 G3406 CATERPILLAR OE STYLE GASKET SETS/ JUEGOS DE JUNTAS ESTILO OE Ref Part Number/ Número de Parte Description/Descripción G3406 OE STYLE GASKET SETS The Following Groups Are For Engine S/N 4FD472 - Up Arr Gasket Group, Water Pump Gasket Group, Central & Oil Pan Gasket Group, Front Structure Gasket Group, Oil Cooler & Lines Gasket Group, Rear Structure 1 7X7657 Gasket Group, Cylinder Head 1 The Following Groups Are For Engine S/N 4FD877 - Up Arr Gasket Group, Water Pump Gasket Group, Central & Oil Pan 1 8C4457 Gasket Group, Front Structure Gasket Group, Oil Cooler & Lines Gasket Group, Rear Structure 1 7X7657 Gasket Group, Cylinder Head 1 * New Number - Order when announced as available. 110

114 G3406 CATERPILLAR Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite

115 G3406 CATERPILLAR Oil Pump & Oil System Components/ Bomba de aceite y componentes del sistema de aceite Ref Part Number/ Número de Parte Description/Descripción G3406 OIL PUMP & OIL SYSTEM COMPONENTS OIL PUMP ASSY N2156 BUSHING M2894 WASHER, HARD 2 112

116 G3406 CATERPILLAR TurboCharger/Turbo Cargador

117 G3406 CATERPILLAR TurboCharger/Turbo Cargador Ref Part Number/ Número de Parte Description/Descripción G3406 TURBOCHARGER & COMPONENTS 01 2N2766 NUT S4295 MOUNTING GASKET N7273 MOUNTING GASKET (elbow to Turbocharger) O-RING SEAL P1255 TURBOCHARGER OIL DRAIN GASKET O-RING SEAL S6595 TURBOCHARGER OIL SUPPLY GASKET 1 114

118 G3406 CATERPILLAR Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring 115

119 G3406 CATERPILLAR Cylinder Kits, Piston Kits, Liner Kits,& Ring Sets/ Kits de Cilindro, Kits de Pistón, Kits de Liner, Kits de Ring Cyliner Kit/ Cilindro Kit Piston/Pistón Liner/ Camisa Piston Rings/Jgo. Anillos Piston Pin/Perno Pistón Piston Pin Retainers/Seguros P/Pistón Liner Sealing Ring/Liner anillo de sellado AFA-LK8996 4P AFA-RS106 8N1608 7E :1 C.R. AFA-LK3888 7E AFA-RS107 8N1608 7E :1 C.R. Note: Cylinder kits include products mentioned are the shaded area/ Nota: Los Kits de Cilindro mencionados incluyen los productos que se encuentran con el área sombreada. Piston Pin Piston Piston Kit/Kit Piston Rings/Jgo. Retainers/ Piston/Pistón Pin/Perno Comment/Comentario Pistón Anillos Seguros Pistón P/Pistón AFA-PK8996 4P8996 8N1608 AFA-RS106 7E :1 C.R. AFA-PK3888 7E3888 8N1608 AFA-RS107 7E :1 C.R. Note: Piston kits include products mentioned are the shaded area/ Nota: Los Kits de Piston mencionados incluyen los productos que se encuentran con el área sombreada. Piston/Pistón 4P8996 7E3888 Comment/Comentario 10.3:1 C.R. 10.5:1 C.R. Liner Kit/Kit de Camisa Liner/Camisa Liner Sealing Ring/Liner anillo de sellado Liner Sealing Ring/Liner anillo de sellado Liner Sealing Ring/Liner anillo de sellado Liner Sealing Ring/Liner anillo de sellado WS L5854 Comment/Comentario Note: Liner kits include products mentioned are the shaded area/ Nota: Los Kits de camisa mencionados incluyen los productos que se encuentran con el área sombreada. Piston Rings/Jgo. Anillos Compression Ring/Anillo de Compresión Compression Ring/Anillo de Compresión Oil Control Ring/Anillo Aceite AFA-RS106 Use w/7e3888 Piston AFA-RS107 Use w/4p8996 Piston Note: Piston Ring Sets include products mentioned are the shaded area/ Nota: Los juegos de anillos mencionados incluyen los productos que se encuentran con el área sombreada. * New Number - Order when announced as available. Comment/Comentario 116

120 Heavy Duty Engine Parts The Service You ve Always Wanted Your first order will demonstrate the difference between AFA and other suppliers. Friendly Knowledgeable Engaged Personal service that treats you with the respect due a strategic partner in the marketplace. Contact AFA and discuss your needs with one of our product specialists who knows diesel and natural gas engines From the inside out Every part and kit is hand picked, packed and double checked by experienced parts personnel. Award Winning Packaging Assures intact delivery Eliminates damage claim headaches No more wasted down time Multi-Lingual Expertise Expedited Processing on Every Order Daily Follow-Up to Insure Timely Delivery We Don t Rest Until We Know the Product is in Your Hands

121 AFA Industries Warranty for Replacement Parts Products Warranted This warranty applies to all new engine parts sold and marketed by AFA Industries unless specifically excluded below. AFA replacement parts are warranted to be free from, defects in workmanship and material under normal use and service. U.S.A. Coverage AFA applications are covered for 24 months, unlimited miles and unlimited hours of operation, whichever occurs first from date of first installation except Cylinder Heads. Cylinder heads are covered for 12 Months from date of installation only, regardless of mileage or hours of operation. International Coverage AFA applications are covered for 24 months, unlimited miles and unlimited hours of operation, whichever occurs first from date of first installation except Cylinder Heads. Cylinder heads are covered for 12 Months from date of installation only, regardless of mileage or hours of operation. AFA responsibilities AFA will pay for all parts and labor needed to repair the warrantable failure to the functional condition existing immediately prior to the failure, including progressive damage to the engine in which the part was installed. Labor costs will be paid in accordance with current published labor rates at no more than published flat rate times in the geographic area in which the repairs are being performed. No overtime or holiday rates will be allowed. Only new AFA approved parts will be used in making the repair. AFA will pay for the Lubricating oil, antifreeze, filter elements, belts, hoses and other maintenance items that are not reusable due to the warrantable failure. Owner responsibilities Owner is responsible for the operating and maintenance of the engine as specified in the Operating and Maintenance manuals. Before the expiration of the applicable warranty, owner must give notice to AFA of a failure considered to be warrantable. It is the owner s responsibility to provide failed and associated parts for examination by AFA Technical Services Department in a condition that makes such examination possible. Owner is responsible for the cost of all repairs made to items other than the engine in which the parts are installed. Owner is responsible for the cost of lubricating oil antifreeze, filter elements belts, hoses and other maintenance items replaced during warranty repairs, except where such items are not reusable due to a warrantable failure. Owner is responsible for lodging, meals and incidental costs incurred by owner or agents of owner as a result of a warrantable failure. Owner is responsible for down-time expenses and all business costs and losses resulting from a warrantable failure Warranty limitations AFA is not responsible for failures resulting from owner or operator or third party abuse or neglect, such as: operation without adequate coolant, fuel or lubricants, over-fueling, over-speeding, lack of maintenance of lubricating, coolant or air intake systems, improper storage, starting, warms-up, run-in or shut-down practices. AFA is not responsible for failures resulting from improper repair or installation or the use of parts not approved by AFA. This warranty DOES NOT apply to parts provided by AFA at no charge to the owner. The warranty set forth herein are the sole warranties made by AFA in regard to its parts. NO AGENT, EMPLOYEE OR REPRESENTATIVE OF AFA HAS ANY AUTHORITY TO BIND AFA TO ANY ADDITIONAL REPRESENTATIONS OR WARRANTY. AFA makes no other warranties, express or implied, or of merchant- ability or fitness for a particular purpose. Revised 3/2017

122 AFA Industries Garantía para Refacciones Productos Garantizados Esta garantía aplica a todas las partes de motor nuevas vendidas y comercializadas por AFA Industries a menos que queden excluidas específicamente en los siguientes párrafos. AFA garantiza que sus refacciones están libres de defectos de mano de obra y en material dentro de condiciones de uso y servicio normales. Cobertura en E.U.A. Las aplicaciones AFA están cubiertas por 24 meses, kilometraje ilimitado y horas de operación ilimitadas, cual sea que ocurra primero a partir de la fecha de la primera instalación, excepto las cabezas de los cilindros. Las cabezas de los cilindros están cubiertas por 12 meses a partir de la fecha de instalación solamente, sin importar el kilometraje o las horas de operación. Cobertura Internacional Las aplicaciones AFA están cubiertas por 24 meses, kilometraje ilimitado y horas de operación ilimitadas, cual sea que ocurra primero a partir de la fecha de la primera instalación, excepto las cabezas de los cilindros. Las cabezas de los cilindros están cubiertas por 12 meses a partir de la fecha de instalación solamente, sin importar el kilometraje o las horas de operación. Responsabilidades de AFA AFA pagará por todas las partes y mano de obra necesarias para reparar la falla aplicable y dejar el motor en las condiciones de funcionamiento existentes inmediatamente antes de la falla, incluyendo daño progresivo al motor en el que fue instalada la parte en cuestión. El costo de mano de obra será pagado de acuerdo a las tarifas de trabajo vigentes publicadas a no más de lo publicado como tarifa fija en el área geográfica en la que la reparación se lleve a cabo la reparación. No se permitirán tarifas especiales por tiempos extra ni por días festivos. Para la reparación solo se utilizarán partes nuevas aprobadas por AFA. AFA pagará por el aceite lubricante, anticongelante, partes de filtro, bandas, mangueras y otros elementos de mantenimiento que no se puedan reutilizar debido a la falla aplicable. Responsabilidades del dueño El dueño es responsable de que la operación y mantenimiento del motor sean tal como se especifica en los manuales de Operación y Mantenimiento. Antes de fecha de expiración de la garantía aplicable, el dueño debe notificar a AFA sobre cualquier falla que considerada como aplicable. Es responsabilidad del dueño hacer llegar la parte que presenta la falla y las partes asociadas a dicha falla para examinación por parte del Departamento de Servicios Técnicos de AFA en condiciones tales que la examinación sea posible. El dueño es responsable por el costo de todas las reparaciones hechas a otros elementos que no sean el motor en donde se instalo la parte en cuestión. El dueño es responsable por el costo de aceite lubricante, anticongelante, filtros, bandas, mangueras y otros elementos de mantenimiento reemplazados durante las reparaciones de garantía, excepto cuando dichos elementos no se puedan reutilizar debido a una falla aplicable. El dueño es responsable del alojamiento, alimentos y costos imprevistos incurridos por el dueño o agentes del dueño resultado de la falla aplicable. El dueño es responsable de los gastos por tiempos-muertos y de todos los costos y pérdidas del negocio resultado de la falla aplicable. Limitaciones de la Garantía AFA no se hará responsable por fallas consecuencia de abuso o negligencia por parte de el dueño u operador o terceros, tales como: operación sin los adecuados refrigerante, combustible o lubricante, sobreabastecimiento de combustible, sobre aceleración, falta de mantenimiento en los sistemas de lubricación, refrigeración o admisión, almacenamiento incorrecto, ejercicios de arranques, calentamientos, carreras y arrancones. AFA no es responsable por fallas resultado de instalaciones o reparaciones erróneas o por el uso de partes no aprobadas por AFA. Esta garantía NO APLICA a partes provistas por AFA al dueño sin cargo. La garantía establecida en este documento es la única garantía establecida por AFA en relación a sus partes. NINGUN AGENTE, EMPLEADO O REPRESENTANTE DE AFA TIENE NINGUNA AUTORIDAD PARA VINCULAR A AFA CON NINGUNA REPRESENTACION O GARANTIA ADICIONAL. AFA no acepta otras garantías, explicitas o implícitas, ni tampoco garantías de comercialización o adecuación para un propósito en particular. Revisado 3/2017

123 Heavy Duty Engine Parts Manufacturer and Supplier of Technologically Advanced Diesel Engine Parts for Caterpillar Cummins Detroit Diesel Navistar AFA TECHNOLOGY Quality Materials Quality Engineering Quality Manufacturing Follow AFAindustries.com TM

124 Application specific, specially induction hardened cylinder liners provide the additional strength to withstand the Caterpillar engines higher operating temperatures and cylinder pressures. Heavy Duty Engine Parts AFA s precision piston manufacturing process features CAD engineering and CNC machining for all aluminum and forged steel pistons. The results are exacting tolerances and extreme durability. World Class Cutting Edge Technology in Every Part Using today s latest sealing technology and material specifications, AFA O-rings are made to meet OE standards in size, material, durometer, with added values to enhance performance, such as color code and PTFE coated material. Each O-ring is made according to specific application from various rubber materials such as EPDM, FKM, HNBR, Nitrile (NBR) and Silicone. AFA USA AFA Industries, 140 East Pond Drive, Romeo, Michigan 48065, U.S.A. Phone (586) Sales@AFAindustries.com 2017 AFA Industries. Caterpillar and Cat are the Registered Trademarks of Caterpillar Inc.