DESIGNERS AND MANUFACTURERS. RoHS COMPLIANT ~ ISO 9001 CERTIFIED

Transcription

1 DESIGNERS ND MNUFCTURERS RoS COMPINT ~ ISO 9001 CERTIFIED

2 Coin Cell olders & Retainers pages 2 7 SMT uto Blade Fuse Clips & olders page 41 TM & SMT Polarized olders page 20 Insulated Coin Cell Retainers page 4 Solar Protection Fuse (SPF) Midget Fuse older page 43 SMT Battery olders page 19 Micro Battery Retainers page 6 SMT & TM Test Points page 61 U Recognized Fuse Clips pages Battery Contacts pages 8 16 Color Coded and SEMS Screw Terminals pages 62 65

3 U Recognized Quick Fit Terminals pages Vertical Card Guides pages 117 Self-Retaining Mounting Spacers for T-1 ED s page 91 PC/104 - PC/104-Plus Mounting Kits page 70 nti-vibration Grommets page & 3.0 USB Plugs and Sockets pages Spacers Supports & Metric Standoffs pages dhesive Bumpers page 130 Micro Pins & Jacks pages Nylon Self-Retaining Spacers & Washers page 75 & 131 PTFE Insulated Terminals & Pins pages

4 C (cont.) I (cont.) P DESIVE BCKED Bumpers PCB Supports IGTOR CIPS UDIO JCKS UTOMOTIVE BDE FUSE CIPS & ODERS B BTTERY CONTCTS & CIPS Clips/ccessories Retainers (Compact Contacts)... 4, 6-7 SMT (Surface Mount) Snap-On for Plastic Cases Spring , TM (Thru ole Mount).. 7,9,13,29-30 BTTERY ODERS luminum , 31 Button Cell Coin Cell (ithium) Contacts Covered, Plastic Interconnect, Steel/luminum ithium ithium-ion , 31 9 Volt , 31 Plastic , 26-27, 31 Retainers (Compact Contacts)... 4, 6-7 SMT (Surface Mount)... 2, 4-5, 17, 19 Steel , Straps TM (Thru ole Mount) , 7, 17-18, 20-21, 26, 31 Vertical BTTERY CONTCTS YOUT & MOUNTING DETIS BTTERY SNPS & STRPS 9 VOT Snap-On Straps BNN PUGS & JCKS BINDING POSTS BORD GUIDES, P.C BRCKETS (Mounting) BRCKETS (Computer) BUMBERS, dhesive Backed BUMPERS, Rubber BUSINGS (Nylo/Rubber) C CBE TIE ROUTING CIP CBE CMPS CBE TIES CPS, ED ENS CPTIVE NUTS CPTIVE SCREWS CRD EJECTORS, PC CSES (Instrumentation) CIPS lligator Battery Fuse , COIN CE BTTERY olders (ithium) COMPUTER Card Ejectors IEEE 1394 Connectors Jack Screws PC Card Brackets USB Connectors COMPUTER BRCKETS Worksheet (Custom Design) CONNECTORS F IEEE Mounting ardware Screw Terminals USB CONTCT PINS (Seamless) E EYEETS EYEET STKING TOO ,135 F FN/FINGER GURDS FIBER WSERS (Flat & Shoulder) FIREWIRE PUGS & SOCKETS FUSE CIPS & ODERS utomotive Blade Clips , Covers olders Midget (SPF) Sub-Miniature FUSE CONTCTS YOUT & MOUNTING DETIS G GROMMETS GURDS, FN/ FINGER OGEN MP SOCKET NDES, INSTRUMENT RDWRE Computer Mounting andle Mounting Screws Nuts / Machine Screws Panel ardware & Nuts Transistor Mounting INGED STNDOFFS OE PUGS IEEE 1394 (FIRE WIRE) PUGS& SOCKETS INSTRUMENTTION CSES INSTRUMENTTION NDES INSUTED COIN CE RETINERS I INSUTED TERMINS INSUTING RDWRE Bushings Ceramic Standoffs Fiber Washers Mica Insulators Nylon Spacers Nylon Washers Spacer Supports (Nylon) Phenolic Spacers INSTTION TOOS Eyelet Quick-Fit , 57 Rivet Solder Terminal Staking ,135 J JCKS udio Banana Insulated Micro Phono Test Tip JCK SCREWS K KNOBS ED ODERS ED ENS CPS ED SPCER MOUNTS ugs (Solder) M ME/FEME STNDOFFS luminum, Brass, Nylon, Stainless Steel Metric PC/ MIC TRNSISTOR INSUTORS MICRO JCKS MICRO PINS MIDGET FUSE ODER MOUNTING BRCKETS N NYON CBE CMPS NYON INSUTED SPCER SUPPORTS NYON SCREWS NYON SNP RIVETS NYON SPCERS NYON STNDOFFS NYON WSERS (Flat,Shoulder & Retaining) PNE BERINGS PNE RDWRE PONO PUGS & JCKS PINS Contact (Seamless) Micro Wire Wrap (.025 Square) PUGS Banana ole Shorting Solderless Tips & Plugs PUS-IN TERMINS Flea Clip, Imp, Micro, Solderless, Tubular Q QUICK-FIT COMPONENTS Boots eaders PC Mount Female Terminals PC Mount Male Terminals Rivet Mount Surface Mount Female Terminals QUICK-FIT INSERTION TOO R RIVETS RUBBER BUMPERS & GROMMETS RETINING SPCERS RETINING WSERS S SCREWS Colored ead andle Mounting Jack Machine Metric Panel Self-Tapping Shoulder Thumb SCREW TERMINS SFT OCKS / EXTENDERS SORTING JCK SORTING PIN SORTING PUG SOUDER SCREWS SMT (Surface Mount Components) udio Jacks Battery Contacts Coin Cell olders Coin Cell Retainers , 6-7 Test Points SOCKETS alogen IEEE Micro RoS COMPINT ~ ISO 9001 CERTIFIED

5 S (cont.) Phono Transistor USB SODER UGS & TERMINS SODER TERMINS SPCERS luminum, Brass, Nylon, Phenolic ED Organizer Kits PC Board (Snap In) SQURE WRP PINS (.025) STKING TOOS ,135 STNDOFFS luminum, Brass, Ceramic, Flame Retardant, Nylon, Phenolic, Stainless Steel inged Metric Organizer Kits PC/ STURDI-MOUNT QUICK-FIT TERMINS T TPE & REE COMPONENTS udio Jacks Battery Contacts Coin Cell olders , 4-5 Coin Cell Retainers , 6-7 Firewire Sockets Fuse Clips Fuse olders Test Points USB Plugs & Sockets TERMIN BORDS Military Screw Scored Turret Terminal Quick-Fit TERMINS Boards Insulated ugs (Solder) Male/Female, Quick-Fit Micro Push In Screw Solder (Standardized/Turret) Solderless Strips Sturdi-Mount, Quick-Fit Test Points TERMIN STRIPS Binding Post (Screw Terminal) Standard & Miniature TEST JCKS TEST POINTS Color Keyed PC Mount T (cont.) Surface Mount Ultra ow Profile TEST TIPS & PUGS TUMB SCREWS TIP JCKS TRNSISTOR COVERS TRNSISTOR SOCKETS/MOUNTS TRNSISTOR SOCKET MOUNTING KITS ,111 TURNBE JCK SCREWS U USB PUGS & SOCKETS V VERTIC COIN CE ODERS VIBRTION (NTI) GROMMETS W WSERS Fibre (Flat & Shoulder) Nylon (Flat & Shoulder) Retaining WORKSEETS (Custom) Computer Brackets BTTERY CIPS, CONTCTS & ODERS PGE 2 FUSE CIPS & ODERS PGE 38 TERMINS & TEST POINTS PGE 49 SPCERS & STNDOFFS PGE 70 PNE RDWRE PGE 82 PINS, PUGS, JCKS & SOCKETS PGE 94 PC BORD RDWRE PGE 114 MUTI-PURPOSE RDWRE PGE 126 RoS COMPINT ~ ISO 9001 CERTIFIED

6 BTTERY CIPS, CONTCTS & ODERS Our battery clips, contacts and holders are designed with leading edge technology in mind, to accommodate all major manufacturers batteries. vailable in a wide range of materials and mounting styles including surface mount, thru hole and off board, some of the applications include: Telecommunications and Video power back-up aptop and mobile computing applications Communication system s power requirements Microcomputer and memory hold Preprogrammed electronic and video games Emergency power systems Industrial and commercial security and alarm systems Miniature battery power devices Computer memory, power transfer and back-up systems Personal medical monitoring devices Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD andother application-engineering support for modifications, special designs or assemblyrequirements to assist you in choosing the right Keystone product for your application.

7 RETINERS Button Cell...6 Coin Cell...7 Negative Contacts...7 CIPS/CONTCTS lkaline & ithium, Rivet...10 lkaline & ithium, PC Battery Clips (no contact)...11 Molded Case Volt...30 SECTION CONTENTS ODERS luminum Coin Cell ithium Cell...20 PC Mount Plastic Steel Volt Volt Straps Rechargeable...17 MOUNTING DETIS BTTERY CIPS, CONTCTS & ODERS 1

8 TRU-OE (TM) & SURFCE MOUNT (SMT) COIN CE ODERS DESIGN DVNTGES Reliable spring tension assures low contact resistance Retains battery securely to withstand shock and vibration Base material U Rated 94V-0. Impervious to most industrial solvents Operating temperature range: -60 F to +293 F (-50 C to +145 C) IDEY SUITED FOR Computer memory, power transfer and back-up systems Video and telecommunications power back-up Microprocessors and Microcomputer memory hold (desktop and laptop applications) Industrial and commercial security and alarm systems PC/104 application 1/3N VIBE ON TPE ND REE 12mm to 16mm COIN CE ODERS TRU OE MOUNT.038 [.97] WIDE PIN (2) PS. BTTERY MTERI: Base: igh Temperature Nylon 46, U Rated 94V-0 Contacts:.012 (.30) Phosphor Bronze, Tin Plate.507 [12.9] REESE.570 [14.5].430 [10.9].450 [11.4].540 [13.7] CT. NO. CES BTTERY REFERENCE 1 D1/3N, K58, CR1/3N SR44, 357, MS76, G-13, 303, V313, PX76 TRU OE MOUNT.593 [15.1] O.D..062 [1.57] EG (3) PS. ON.375 [2.5] CIR. NEGITIVE.750 [19.1].393 [10.0] MTERI: Base: PBT, U Rated 94V-0 Positive Contact:.015 (.38) Spring Steel, Tin-Nickel Plate Negative Contact:.035 (.89) Dia. Steel, Tin-Nickel Plate CT. EIGT NO. () CES BTTERY REFERENCE (7.1) 1 BR1212, CR1216, C1220, CR (9.7) 2 BR1212, CR1216, C1220, CR1225 TRU OE MOUNT.750 [19.0] O.D..062 [1.57] EG (3) PS. ON.375 [2.5] CIR. NEGITIVE MTERI: Base: Glass Filled CP, U Rated 94V [22.8].463 [11.8] Positive Contact:.015 (.38) Spring Steel, Tin-Nickel Plate Negative Contact:.035 (.89) Dia. Steel, Tin-Nickel Plate CT. EIGT NO. () CES BTTERY REFERENCE 1 CR1612, C1616, C (7.3) 2 CR BR1625, CR (8.4) 2 BR1616, CR1620, C [1.2] x.060 [1.52]..240 [6.1].497 [12.6] I.D..196 [5.0] POSITIVE.196 [5.0].635 [16.1] I.D..450 [11.40].120 [3.0] MIN..393 [10.0].120 [3.0] MIN..463 [11.8].031 [0.79].053 [1.3] POSITIVE.035 [0.9].047 [1.2] (2) PS.040 [1.0] DI (2) PS..061 [1.5].035 [0.9].040 [1.0] DI (2) PS..061 [1.5] 12mm 16mm 16mm VERTIC TYP. BTTERY REESE.540 [13.7].570 [14.5].430 [10.9].048 [1.2] x.060 [1.52]. MTERI: Base: igh Temperature Nylon 46, U Rated 94V-0 Contacts:.012 (.30) Phosphor Bronze, Gold Plate (Flash).071 [1.8] (2) PS.591 [15.0].567 [14.4].512 [13.0] I.D..740 [18.8].048 [1.22] EG.036 [0.91] EG.157 [4.0] MTERI: Base: Glass Filled PPS. U Rated 94V-0 Contacts:.008 (.20) Phosphor Bronze, Gold Plate (Flash).506 [12.9].748 [19.0] CT. NO. ON TPE BUK & REE CES BTTERY REFERENCE 1 D1/3N, K58, CR1/3N TR 2 SR44, 357, MS76, G-13, 303, V313, PX76 Tape & Reel Spec s: 44mm wide; 20mm pitch; 13 inch reel (200 pieces per reel).042 [1.1].121 [3.1].102 CT. NO. ON TPE [2.6] BUK & REE CES BTTERY REFERENCE TR 1 CR1220, BR1220 Tape & Reel Spec s: 32mm wide; 20mm pitch; 13 inch reel (500 per reel).138 [3.5] (2) PS VIBE ON TPE ND REE VIBE ON TPE ND REE [28.7].677 [17.2].630 [16.0].212 [5.4] MTERI: Base: Glass Filled CP, U Rated 94V-0 Contacts:.006 (.15) Phosphor Bronze, Gold Plate (Flash) CT. NO. BUK ON TPE & REE CES BTTERY REFERENCE TR 1 BR1625, CR1632 Tape & Reel Spec s: 44mm wide; 24mm pitch; 13 inch reel (450 per reel).240 [6.1] Pad ayout.748 [19.0] Pad ayout.088 [2.2].295 [7.5].480 [12.2] [28.7] MIN..111 [2.82] SURFCE MOUNT Pad ayout.053 [1.3].156 [4.0] SURFCE MOUNT.055 [1.4] SQURE ZONE FOR OPTION DESIVE.144 [3.6] SURFCE MOUNT.138 [3.51].832 [21.1].728 [18.5].270 [6.9].640 [16.3] MTERI: Base: PBT, U Rated 94V-0 Contacts:.010 (.25) Steel, Tin-Nickel Plate Battery Reference: (1) cell: BR1612, CR1616, C1620, CR1625, BR1632 CT. NO [17.3].070 [1.8].478 [12.1].145 [3.7].125 [3.2].422 [10.7].050 [1.3].045 [1.1].136 [3.5] (2) PS.060 [1.5] (2) PS Pad ayout.478 [12.1].422 [10.7].174 [4.4] [3.5].047 [1.2] 2 RoS COMPINT ~ ISO 9001 CERTIFIED

9 20mm TRU-OE MOUNT COIN CE ODERS dvanced air-flow design enhances air circulation around battery Reliable spring tension assures low contact resistance Unique notched slots assure quick and easy battery insertion and replacement Retains battery securely to withstand shock and vibration PBT base material U rated 94V-0. Impervious to most industrial solvents Operating temperature range: -60ºF to +293ºF (-50ºC to +145ºC) MTERI: Contacts:.020 (.50) Spring Steel, Tin-Nickel Plate Base: PBT, U Rated 94V-0 CT. NO. G O.D. NO. OF CES BTTERY REFERENCE (1) cell (any 20mm) (2.5).335 (8.5) (28.7).896 (22.8) (2) 2012, (2) 2016 BR2012,CR2012, CR2016, C2016, D2020, C2025, BR2025, CR2032, C2032 (1) cell (any 20mm) (4.6).414 (10.5) (28.7).896 (22.8) (2) 2012, (2) 2016 BR2012,CR2012, CR2016, C2016, D2020, C2025, BR2025, CR2032, C2032 (1) cell (any 20mm) (2.5).335 (8.5) (31.0) (27.8) (2) 2012, (2) 2016 BR2012,CR2012, CR2016, C2016, D2020, C2025, BR2025, CR2032, C (2.5).452 (11.5) (31.0) (27.8) (2) 2020, (2) 2025, (2) 2032 D2020, CR2020, C2025, BR2025, CR2032, C2032 Battery Pop-in from top for compact applications Finger pressure against leaver will release battery No tools required for battery changes MTERI: Contacts:.016 (.40) Phosphor Bronze, Tin Plate Base: Nylon U Rated 94V-0 CT. NO. BTTERY REFERENCE 1066 BR2025, CR2032 MTERI: Contacts:.012 (.30) Spring Steel, Tin-Nickel Plate Base: PBT, U Rated 94V-0 CT. NO. BTTERY REFERENCE 1067 CR2016, D2020, C2025, CR [4.6].060 [1.57] DI x.062 [1.57]. EG O.D..785 [19.9].906 [23.0].122 [3.10].875 [22.2].670 [17.0].280 [7.1] NEG [20.5] T TIP [27.7].807 [20.5].787 [20.0].038 [1.0].250 [6.3].796 [20.2] I.D. G TOP ODING VERTIC COMPCT.050 [1.27].045 [1.14].140 [3.6].023 [.58].531 [3.6].388 [9.85].059 [1.50] EG (3) PS. ON.730 [18.5] CIRCE.055 [1.4].094 [2.4] DI.280 [7.1].050 [1.27].094 [2.4].035 [.89].787 [20.0] ccepts all major manufacturers 20mm diameter batteries Molded notch prevents improper insertion of 2032 size cells Retains cells securely, withstands shock and vibration Polarity clearly marked Mounts securely for wave soldering Temperature range: -60 F to +293 F (-50 Cto+145 C).300 [7.6].062 [1.57] EG (3) PS. ON.750 [19.00] CIRCE Cat. No. 101 is designed to maximize PC Board Capacity Unique raised mounting design allows components to be placed underneath the holder Ideal when board space is more important than board height; such as PC/104 applicatons [20.5].070 [1.78] [1.19].300 [7.6] 20mm COIN CE ODERS [26.4].920 [23.4] VERTIC SIMINE.300 [7.6].238 [6.0] Polarized holder Mounts securely for wave soldering Reliable spring tension assures low contact resistance Retains 20mm batteries securely to withstand shock and vibration Temperature range -60 F to +293 F (-50 C to +145 C) POS [23.3].795 [20.2] [25.4] MTERI: Contacts:.016 (.40) Spring Steel, Tin-Nickel Plate Base: PBT, U Rated 94V-0 CT. NO. BTTERY REFERENCE 1065 BR2012, CR2016, D2020, C2025, CR [1.8] NEG.600 [15.2].145 [3.7].150 [3.8].515 [13.1].050 [1.3].045 [1.14] (2) PS.515 [13.1].136 [3.5].060 [1.52].295 [7.5].315 [8.0].118 [3.0].600 [15.2] RoS COMPINT ~ ISO 9001 CERTIFIED 3

10 TRU-OE (TM) & SURFCE MOUNT (SMT) COIN CE ODERS DESIGN DVNTGES Reliable spring tension assures low contact resistance Retains battery securely to withstand shock and vibration ll conductive polystyrene carrier tape meets NSI/EI standard Base material U Rated 94V-0. Impervious to most industrial solvents Operating temperature range: -60 F to +293 F (-50 C to +145 C) 20mm CES IDEY SUITED FOR Computer memory, power transfer and back-up systems Video and telecommunications power back-up Microprocessors and Microcomputer memory hold (desktop and laptop applications) VIBE ON TPE ND REE Industrial and commercial security and alarm systems Communications power sources PC/104 applications 20mm COIN CE ODERS Polarity clearly marked (+) Compatible with vacuum and mechanical pick & place assembly systems ow profile for high density packaging Rugged construction, light weight SMT solder tail with Flow-ole design for increased joint strength Viewable solder tails assures reliable joint inspection Safe for all soldering & reflow operations MTERI: Contacts:.015 (.38) Steel Base: igh Temperature, Nylon 46, U Rated 94V-0 Tin-Nickel Plate Gold Plate (Flash) CT. NO. ON TPE CT. NO. ON TPE D BTTERY BUK & REE BUK & REE PD SIZE IEGT CES REFERENCE TR TR.156 (4.0).290 (7.4) (1) Cell (any 20mm) TR TR.278 (7.1) (2) 2012, (2) 2016 CR2012, C2016, BR2020, D TR TR.156 (4.0).391 (9.9) (2) 2020, (2) 2025, (2) 2032 CR TR TR.278 (7.1) (3) 2012, (3) 2016 Tape & Reel Spec s: 44mm wide; 32mm pitch; 13 inch reel (200 pieces per reel) Surface Mount VIBE ON TPE ND REE.142 [3.6] [28.4].630 [16.0].125 [3.2].437 [11.1] D.703 [17.9] D.896 [22.8] NEG.931 [23.65].093 [2.36] MIN. D MIN. Pad ayout Compatible with vacuum and mechanical pick &.866 [22.0].866 [22.0] place assembly systems.217 [5.5].217 [5.5] MTERI: [31.9].130 [3.3] Contacts:.006 (.15) Phosphor Bronze, [26.9] Gold Plate (Flash) Base: Glass Filled CP, U Rated 94V-0 Pad ayout [29.3].102 [2.6] MIN. CT. NO. ON TPE MTERI: [26.9] BUK & REE BTTERY REFERENCE Contacts:.006 (.15) TR CR2025, D Phosphor Bronze, Tin Plate.100 CT. [3.6].433 [11.0] X.276 [7.0] [0.97] Tape & Reel Spec s: 44mm wide; 24mm pitch; 13 inch reel [2.5] Base: Glass Filled CP, OPTION DESIVE NO. BTTERY REFERENCE (500 pieces per reel) ZONE U Rated 94V CR2025, D2032 VIBE ON TPE ND REE INSUTED RETINERS Ideal for 6 volt or 3 volt applications Two coin cell batteries can be installed in series Plastic insulator prevents shorting of battery, within the holder, when installed improperly 2025 / 2032 CE Polarized olders ow Profile for high density packaged PCB s Vertical entry 20mm CES ow profile Battery release ports for easy battery replacement Refer to pages 6 & 7 for a complete offering of coin cell retainers MTERI: Contacts:.010 (.25) Phosphor Bronze Insulator: igh Temperature, Nylon 46, U Rated 94V [28.4].630 [16.0] Thru ole Mount.703 [17.6] MX. 4 Pad ayout NEG. CONTCT (PD).156 [3.96] SQ. MIN. SQ. MIN [34.0] MIN. Surface Mount.532 [13.5].939 [23.9] [34.0].093 [2.4] BTTERY REESE (2) PS.535 [13.6].110 [2.8].940 [23.9] [25.5] BTTERY REESE (2) PS. Thru ole Mount NEG. CONTCT (PD) *.156 [3.96] SQ. MIN. Surface Mount Thru ole Mount Tin-Nickel Plate Matte Tin Plate BTTERY REFERENCE Tin-Nickel Plate CT. NO. CT. NO. ON TPE CT. NO. CT. NO. ON TPE 6 VOT 3 VOT CT. NO. CT. NO. OOSE* BUK & REE OOSE* BUK & REE (2) CES (1) CE OOSE* BUK TR TR.890 (22.6).156 (4.0) 2012, , (22.6).156 (4.0) TR TR.877 (22.3).240 (6.1) 2020, (22.3).240 (6.1) TR TR.877 (22.3).295 (7.5) 2032 Not pplicable.877 (22.3).295 (7.5) * Supplied Unassembled Tape & Reel Spec s: 56mm wide; 28mm pitch; 13 inch reel: 3020TR, 3070TR 400 pieces per reel; 3022TR, 3072TR 250 pieces per reel; 3024TR, 3074TR 250 pieces per reel RoS COMPINT ~ ISO 9001 CERTIFIED.939 [23.9].073 [1.85] (2) PS

11 TRU-OE (TM) & SURFCE MOUNT (SMT) COIN CE ODERS Thru ole Mount MTERI: Contacts:.020 (.50) Spring Steel, Tin-Nickel Plate Base: PBT, U Rated 94V-0 Operating Temperature: -60 F to +293 F (-50 C to +145 C) Polarity clearly marked (+) Rugged construction, light weight SMT solder tail with Flow-ole design for increased joint strength Viewable solder tails assures reliable joint inspection Safe for all soldering & reflow operations Compatible with vacuum and mechanical pick & place assembly systems CT. NO. OF BTTERY NO. O.D. CES REFERENCE (8.5) (29.2) (25.4) (1) Cell (ny 23mm) (8.5) (31.0) (27.8) (1) Cell (ny 23mm) BR2320, CR2320, (1) 2354 C2325, D2330, (11.5) (31.0) (27.8) (2) 2320, (2) 2325, C2354, CR2335 (2) 2330 Thru ole Mount MTERI: Base: PBT, U Rated 94V-0 Contacts:.020 (.50) Spring Steel, Tin-Nickel Plate Operating Temperature: -60 F to +293 F (-50 C to +145 C) CT. NO. OF BTTERY NO. C CES REFERENCE (1.6).335 (8.5).805 (20.5) (1) (1.9).452 (11.5).805 (20.5) (1) 2450 CR2430, C2430, (2) 2430 BR2450, CR2477 (1) (1.9).503 (12.8).805 (20.5) (2) 2430 Thru ole Mount O.D [27.8] [26.8] O.D..008 [0.20] MTERI: Contacts: Phosphor Bronze, Nickel Plate Base: igh Temp Nylon 46, U Rated 94V-0 Operating Temperature: -60 F to +293 F (-50 C to +145 C) CT. BTTERY NO. C REFERENCE (20.0).048 (1.2) (1) CR2450 NEG NEG.807 [20.5] [31.0] [29.4].911 [23.1] I.D..062 [1.57] EG (3) P ON.750 [19.1] CIRCE.187 [4.8].985 [24.0] I.D..062 [1.57] EG (3) P ON.750 [19.1] CIRCE.187 [4.8].974 [24.8] I.D..425 [10.8].016 [0.41].035 [.89] Battery Pop-in from Top for compact designs No tools required Finger pressure battery release.807 [20.5].055 [1.4] DI (2) PS. dvanced air-flow design enhances air circulation around battery Unique notched slots assure quick and easy battery insertion and replacement.050 [1.3].045 [1.1].374 [9.5].050 [1.3].045 [1.1].150 [3.2] MIN.055 [1.4] DI (2) PS..055 [1.4] DI (2) PS. C C 23mm 24mm 24mm TOP oading.125 [3.2] Polarized holder ow profile for densely packed PCB s Compatible with vacuum and mechanical pick & place systems Conductive carrier tape meets NS/EI- 481 standard.437 [11.1] D.703 [17.9] D.290 [7.4] [25.4] NEG.931 [23.6] MTERI: Contacts:.015 (.38) Steel Base: igh Temp Nylon 46, U Rated 94V-0 Operating Temperature: -60 F to +293 F (-50 C to +145 C) Tin-Nickel Plate Gold Plate (Flash) CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE D PD SIZE BTTERY REFERENCE TR TR.156 (4.0) CR2320, C2325, TR TR.278 (7.1) D2330, CR2335 Tape & Reel Spec s: 44mm wide; 32mm pitch; 13 inch reel, (200 pieces per reel) Note: ll conductive polystyrene carrier tape meets NSI/EI standard Polarized holder Mounts securely for wave soldering Reliable spring tension assures low contact resistance.070 [1.8] [31.9].810 [20.6] MTERI: Base: PBT, U Rated 94V-0 Contacts:.020 (.50) Spring Steel, Tin-Nickel Plate Operating Temperature: -60 F to +293 F (-50 C to +145 C) CT. NO. BTTERY REFERENCE 1068 (1) CR2450, (1) C [3.5] VIBE ON TPE ND REE.370 [9.4] [26.1].145 [3.7].150 [3.8] [32.8] [26.9] MTERI: [36.4] Base: CP, U Rated 94V-0 Contacts:.020 (.50) Spring Steel, Tin-Nickel Plate Operating Temperature: -60 F to +293 F (-50 C to +145 C) CT. NO. BUK ON TPE & REE BTTERY REFERENCE TR (1) CR2450 Tape & Reel Spec s: 56mm wide; 24mm pitch; 13 inch reel, (250 pieces per reel).232 [5.9].770 [19.6].620 [15.7] [28.9] VIBE ON TPE ND REE.050 [1.3].045 [1.1].405 [10.3].185 [4.7].162 [4.2].630 [16.0].294 [7.47].276 [7.0] [27.7].433 [11.0] [36.4] MIN..100 [2.5] MIN. D MIN..810 [20.6] OPTION DESIVE ZONE Surface Mount Pad ayout.620 [15.7].703 [17.9] Thru ole Mount Surface Mount.055 [1.40] (2) PS..136 [3.45].111 [2.8] MIN..138 [3.5] MIN. 23mm to 30mm COIN CE ODERS Thru ole Mount MTERI: Contacts:.020 (.50) Spring Steel, Tin-Nickel Plate Base: PBT, U Rated 94V-0 Operating Temperature: -60 F to +293 F (-50 C to +145 C) 30mm CT. NO. BTTERY REFERENCE 301 BR [8.5] [32.9] RoS COMPINT ~ ISO 9001 CERTIFIED NEG [36.2] [20.5] [30.1] I.D..062 [1.57] EG (3) P ON.953 [24.2] CIRCE.187 [4.8].050 [1.27].045 [1.14].807 [20.5].055 [1.4] DI (2) PS..070 [1.77] 5

12 4 mm to 12 mm BUTTON CE RETINERS 6 TRU OE (TM) & SURFCE MOUNT (SMT) BUTTON CE RETINERS Economical and reliable SMT and TM coin cell retainers specifically designed for miniature electronic applications with limited board space. vailable in Thru ole Mount (TM) or Surface Mount TM legs maintain relative position during and after soldering Retains battery securely to withstand shock and vibration (SMT) configurations Ideally suited for igh Density packaging Solder tail located outside of retainer body which facilitates SMT solder tail with flow-hole design for increased joint strength Reliable spring tension assures low contact resistance visual inspection of the solder joints VIBE ON TPE ND REE 4.8 mm Surface Mount MTERI:.006 (.15) Phosphor Bronze, Gold Plate (Flash) CT. NO. ON TPE BTTERY BUK & REE REFERENCE TR M [2.5].202 [5.1].315 [8.0] STMP (+) S SOWN.052 [1.3].249 [6.3] STMP (+) S SOWN.339 [8.6].315 [8.0].060 [1.5].315 [8.0].421 [10.7].346 [8.8].418 [10.6] STMP (+) S SOWN.157 [4.0].065 [1.7] Tape & Reel Spec s: 16mm wide; 8mm pitch; 13 inch reel (1500 pieces per reel) Surface Mount R.032 [R0.8].120 [3.0] MTERI:.010 (.25) Phosphor Bronze CT. NO. ON TPE BUK & REE FINIS BTTERY REFERENCE TR Tin-Nickel TR Matte Tin MC621, V364, SC621, DR13, V13T Tape & Reel Spec s: 24mm wide; 12mm pitch; 13 inch reel (1000 pieces per reel) Surface Mount MTERI:.010 (.25) Phosphor Bronze, Gold Plate (Flash) STMP (+) S SOWN CT. NO. ON TPE BTTERY.225 [5.7] BUK & REE REFERENCE TR Size 13, D13, Z13E.526 [13.4] Tape & Reel Spec s: 24mm wide; 12mm pitch; 13 inch reel (800 pieces per reel) Surface Mount.062 [1.6].138 [3.5].116 [3.0] MTERI:.006 (.15) Phosphor Bronze, Tin-Nickel Plate.634 [16.1] CT. NO. ON TPE BTTERY BUK & REE FINIS REFERENCE TR Tin-Nickel TR Matte Tin CR927, CR1025 Tape & Reel Spec s: 24mm wide; 12mm pitch; 13 inch reel (1500 pieces per reel) Surface Mount VIBE ON TPE ND REE VIBE ON TPE ND REE VIBE ON TPE ND REE VIBE ON TPE ND REE.475 [12.1].265 [6.7].520 [13.2] MTERI:.010 (.25) Phosphor Bronze.700 [17.8] CT. NO. ON TPE BUK & REE FINIS BTTERY REFERENCE TR Tin-Nickel SR44, R44, 357, MS76, TR Matte Tin PX76, G-13, 303, V313 Tape & Reel Spec s: 32mm wide; 16mm pitch; 13 inch reel (600 pieces per reel) NEG. CONTCT (PD).060 [1.5] SQR. MIN.060 [1.5].070 [1.8].052 [1.3] STMP (+) S SOWN.235 [6.0].315 [8.0].100 [2.5] NEG. CONTCT (PD).156 [4.0] SQR. MIN..440 [11.2] NEG. CONTCT (PD) SQR. MIN..138 [3.5].080 [2.0].526 [13.4].200 [5.1] NEG. CONTCT (PD).156 [4.0] SQR. MIN..114 [2.9].634 [16.1] NEG. CONTCT (PD).156 [4.0] SQR. MIN. SQR..700 [17.8] 6.8 mm 7.9 mm 9-10 mm 11.6 mm MTERI:.006 (.15) Phosphor Bronze, Tin-Nickel Plate CT. NO. BTTERY REFERENCE 2995 M [8.6].195 [5.0].475 [12.1].323 [8.2].315 [8.0].215 [5.5] MTERI:.010 (.25) Phosphor Bronze, Tin-Nickel Plate CT. NO. BTTERY REFERENCE 2999 MC621, V364, SC621 MTERI:.010 (.25) Phosphor Bronze, Tin-Nickel Plate CT. NO. BTTERY REFERENCE 2989 Size 13, D13, Z13E.116 [3.0].202 [5.1].030 [0.8].315 [8.0].418 [10.6].482 [12.2] MTERI:.006 (.15) Phosphor Bronze, Tin-Nickel Plate CT. BTTERY NO. REFERENCE 3031 CR927, CR [9.7].520 [13.2].585 [14.9].249 [6.3].320 [8.1].030 [0.8].196 [5.0] STMP (+) S SOWN STMP (+) S SOWN.180 [4.6].158 [4.0].346 [8.8].336 [8.5].116 [3.0].265 [6.7] STMP (+) S SOWN.062 [1.6] STMP (+) S SOWN.157 [4.0].065 [1.7].062 [1.6] STMP (+) S SOWN.062 [1.6] MTERI:.010 (.25) Phosphor Bronze, Tin-Nickel Plate CT. NO. BTTERY REFERENCE 2997 SR44, R44, 357, MS76, PX76, G-13, 303, V313 RoS COMPINT ~ ISO 9001 CERTIFIED.235 [6.0].038 [1.0].137 [3.5].225 [5.7].038 [1.0] Thru ole Mount NEG. CONTCT (PD).060 [1.5] SQR. MIN.196 [5.0] Thru ole Mount NEG. CONTCT (PD).156 [4.0] SQR. MIN..073 [1.9].336 [5.53].315 [8.0] Thru ole Mount.047 [1.2].047 [1.2] NEG. CONTCT (PD).125 [3.17] SQ. MIN. Thru ole Mount NEG. CONTCT (PD).156 [4.0] SQR. MIN..073 [1.85].072 [1.8].418 [10.60] Thru ole Mount NEG. CONTCT (PD).156 [4.0] SQR. MIN..520 [13.2]

13 TRU OE (TM) & SURFCE MOUNT (SMT) COIN CE RETINERS SURFCE MOUNT (SMT) FOW OE/SOT VIBE ON TPE ND REE Battery retainers are suited for high density PCB packaging. Engineered with reliable spring tension, these contacts assure low resistance while firmly securing the battery within the retainer. Compatible with all wave and reflow operations Solder tails located outside of retainer body which facilitates visual inspection of the solder joints Flow-hole solder tail designed for increased joint strength Compatible with most vacuum and mechanical pick & place assembly systems Matte Tin Plate for lower soldering temperatures ideal where other temperature sensitive components are being used Tin-Nickel plated retainers are ideal for lead free, high temperature soldering applications ll conductive polystyrene carrier tape meets NSI/EI-481 standards Insulated retainers available for 6 volt applicatins. See page 4. ssures proper contact Pad ayout.062 [1.57] MIN. SQR. B MIN..062 [1.54].030 [.76] F MIN. NEG. CONTCT (PD).156 [3.96] SQ. MIN. W MIN. G MIN. NEGTIVE BTTERY CONTCTS*.016 [.41] SURFCE MOUNT (SMT) ssures proper contact Pad ayout.112 [2.7].625 [15.9].625 [15.9] RoS COMPINT ~ ISO 9001 CERTIFIED.105 [2.7].360 [9.1].112 [2.8].031 [.78] DI (3) PS.127 [3.2] DWG. 1 MTERI:.008 (.20) Brass DWG. 2 MTERI:.010 (.25) Phospher Bronze TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE DWG. TPE & REE SPECS TR TR (9.4).250 (6.4) 16mm wide, 8mm pitch, 1500/7 reel TR TR (7.4).186 (4.7) 16mm wide, 12mm pitch, 1000/7 reel TR TR (15.9) 24mm wide, 16mm pitch, 1000/13 reel *Note: Cannot be used with Cat. No. 3028, 3029, 3032, F PORITY MRKING E B W PORITY MRKING TIN-NICKE PTE REFER TO TRU OE MOUNT (TM) DRWING CT. NO. CE BUK B E W BTTERY REFERENCE (13.2).265 (6.7).210 (5.3).118 (3.0).475 (12.1).585 (14.9) 12mm BR1216, CR1216, BR1220, C1220, CR1220, BR (16.9).344 (8.7).265 (6.7).156 (4.0).594 (15.1).723 (18.4) 16mm BR1616, CR1612, CR1616, CR1620, CR (21.1).298 (7.6).176 (4.5).067 (1.7).618 (15.7).890 (22.6) BR2012, CR2012, D (21.1).416 (10.6).194 (4.9).085 (2.2).782 (19.9).890 (22.6) 20mm BR2016, CR2016, D (21.1).416 (10.6).265 (6.7).156 (4.0).782 (19.9).890 (22.6) BR2016, D2020, CR2320, CR2025, CR (23.9).475 (12.1).265 (6.7).156 (4.0).832 (21.1) (25.5) BR2320, C2330, CR2320, BR2325, CR2325, D (23.9).475 (12.1).351 (8.9).240 (6.1).819 (20.8) (25.5) 23mm CR2354, D (25.4).313 (8.0).176 (4.5).067 (1.7).681 (17.3) (26.8) BR2412, CR (25.4).506 (12.9).265 (6.7).156 (4.0).918 (23.3) (26.8) CR2430, D mm (25.4).506 (12.9).350 (8.9).230 (5.8).890 (22.5) (26.9) CR2450, D (25.4).506 (12.9).450 (11.4).336 (8.5).890 (22.5) (26.9) CR2477, D [2.01].062 [1.6].308 [7.8].373 [9.5] MTERI:.008 (.20) Phosphor Bronze, Tin-Nickel Plate CT. NO NEG. CONTCT (PD) *.156 [3.96] SQ. MIN..073 [1.85] (2) PS TRU OE MOUNT (TM) W MTERI:.010 (.25) Phosphor Bronze TIN-NICKE PTE MTTE TIN PTE REFER TO SURFCE MOUNT (SMT) DRWING CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE B F G W CE BTTERY REFERENCE TPE & REE SPEC S TR TR.520 (13.2).265 (6.7).125 (3.2).125 (3.2).125 (3.2).475 (12.1).745 (18.9) 12mm CR1216, BR1220, C mm wide; 16mm pitch; 1000/reel TR TR.664 (16.9).344 (8.7).125 (3.2).125 (3.2).156 (4.0).594 (15.1).914 (23.2) 16mm BR1612, CR1616, CR1620, D mm wide; 24mm pitch; 600/reel TR TR.831 (21.1).298 (7.6).200 (5.1).050 (1.3).067 (1.7).618 (15.7).911 (23.1) 20mm BR2012, CR2012, D mm wide; 24mm pitch; 1000/reel TR TR.831 (21.1).416 (10.6).200 (5.1).200 (5.1).085 (2.2).782 (19.9) (30.7) 20mm BR2016, CR2016, D mm wide; 32mm pitch; 750/reel TR TR.835 (21.2).291 (7.4).200 (5.1).050 (1.3).160 (4.1).635 (16.1) (23.1) 20mm D2020, CR2025, CR mm wide; 24mm pitch; 500/reel TR TR.831 (21.1).416 (10.6).200 (5.1).200 (5.1).156 (4.0).782 (19.9) (30.7) 20mm D2020, CR2025, CR mm wide; 24mm pitch; 500/reel TR TR.939 (23.9).475 (12.1).200 (5.1).200 (5.1).156 (4.0).832 (21.1) (34.0) 23mm BR2320, C2325, CR2330, D mm wide; 32mm pitch; 400/reel TR TR.939 (23.9).475 (12.1).200 (5.1).200 (5.1).240 (6.1).819 (20.8) (34.0) 23mm CR2354, D mm wide; 32mm pitch; 200/reel TR TR (25.4).313 (8.0).200 (5.1).050 (1.3).067 (1.7).681 (17.3) (27.4) 24mm BR2412, CR mm wide, 24mm pitch, 1000/reel TR TR (25.4).506 (12.9).200 (5.1).200 (5.1).156 (4.0).918 (23.3) (35.6) 24mm CR2430, D mm wide; 32mm pitch; 400/reel TR TR (25.4).506 (12.9).200 (5.1).200 (5.1).230 (5.8).890 (22.6) (35.6) 24mm CR2450, D mm wide; 32mm pitch; 200/reel COMPCT VIBE ON TPE ND REE SPRING CONTCT TRU OE MOUNT (TM) Thru ole Mount.212 [5.4] Snap-In ssures proper contact.128 [3.3].062 [1.57].300 [7.6].073 [1.9] (2) PS 12mm to 24mm COIN CE RETINERS 7

14 SURFCE MOUNT BTTERY CIPS/CONTCTS Flow-ole SMT solder tail design for increased joint strength Tin-Nickel plating is ideal for lead free, high temperature soldering VIBE ON TPE ND REE Refer to page 32 for Battery Contact ayout & s 27 Matte Tin Plate for lower soldering temperatures ideal where other temperature sensitive components are being used SURFCE MOUNT BTTERY CIPS & CONTCTS 8 MTERI:.010 (.25) Spring Steel TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE 50 50TR TR Tape & Reel Spec s: 24mm wide; 16mm pitch; 13 inch reel, (500 pieces per reel).569 [14.4].250 [6.4].296 [7.5].092 [2.34].497 [12.6].092 [2.34].312 [7.9].369 [9.4] MTERI:.012 (.30) Spring Steel TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE 53 53TR TR Tape & Reel Spec s: 32mm wide; 24mm pitch; 13 inch reel, (150 pieces per reel).250 [6.4].156 [4.0].671 [17.0].040 [1.02].258 [6.6].662 [16.8].092 [2.34].047 [1.19].498 [12.7].047 [1.19].050 [1.27].226 [5.7] Pad ayout MTERI:.010 (.25) Spring Steel TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE MIN TR TR Tape & Reel Spec s: 32mm wide; 16mm pitch; 13 inch reel, (300 pieces per reel).092 [2.3].187 [4.8].320 [8.1].593 [15.06].359 [9.1].156 [4.0] MIN. TYP..671 [17.0] MIN..156 [4.0] TYP..055 [1.39].124 [3.2] Economical & reliable contacts are ideal for surface mount applications Unique spring tension contacts adjust to variations in battery length MTERI:.010 (.25) Spring Steel.109 [2.8] TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE TR TR Tape and Reel Spec s: 24mm wide; 12mm pitch; 13 inch reel (400 pieces per reel).388 [9.9] MIN..270 [6.9].200 [5.1] Pad ayout.156 [4.0] MIN. TYP..662 [16.8] MIN..300 [7.6].098 [2.5].092 [2.34] MIN..092 [2.34] MIN..064 [1.63].320 [8.1].400 [10.2].093 [2.36].047 [1.19].187 [4.8] [6.8] [4.9] VIBE ON TPE ND REE RoS COMPINT ~ ISO 9001 CERTIFIED MTERI:.010 (.25) Spring Steel TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE 56 56TR TR Tape & Reel Spec s: 32mm wide; 20mm pitch; 13 inch reel, (250 pieces per reel) MTERI:.010 (.25) Spring Steel TIN-NICKE PTE MTTE TIN PTE CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE 57 57TR TR Tape & Reel Spec s: 32mm wide; 20mm pitch; 13 inch reel, (250 pieces per reel).156 [3.96] (2) PS SURFCE MOUNT EF-SPRING CONTCTS 12V N N 23 CR2.092 [2.34] OE.040 [1.02].156 [4.0] (2) PS.613 [15.6].545 [13.8].092 [.2.34] OE.040 [1.02].613 [15.6] MIN. Reliable spring tension contacts assure low contact resistance SMT solder tail with flow-hole design for increased joint strength CR2 9V.435 [11.0].092 [2.33].047 [1.19] OE.396 [10.0].215 [5.48].200 [5.1] Pad ayout.360 [9.1] MIN. Pad ayout.156 [4.0] MIN. TYP..613 [15.6] MIN..092 [2.33].047 [1.19] OE.466 [11.8].285 [7.2] MIN. Pad ayout.156 [4.0] MIN. TYP..613 [15.6] MIN..300 [7.6].098 [2.5] MTERI:.010 (.25) Spring Steel TIN-NICKE PTE MTTE TIN PTE.109 [2.8] CT. NO. ON TPE CT. NO. ON TPE BUK & REE BUK & REE TR TR Tape and Reel Spec s: 32mm wide; 16mm pitch; 13 inch reel (250 pieces per reel).124 [3.2] MIN..300 [7.6].092 [2.34] MIN..092 [2.34] MIN.

15 PC BTTERY CIPS Mounts securely to the PC board with advanced Snap-In design for thru hole mounting Reliable spring tension assures low contact resistance ow profile, economical design Retains battery securely to withstand shock and vibration,,, N, 12V, 2/3, 17-19mm 27 Refer to page 33 for Battery Contact ayout & s N 23 CR mm*.047 [1.2] W.094 [2.4].015 [0.4].380 [9.7].550 [14.0].120 [3.0] MTERI: Frame:.015 (.38) Steel, Tin-Nickel Plate B C.320 [8.1].062 [1.6].062 [1.57] P.C. BUTTON & SPRING CONTCTS MTERI: Frame:.015 (.38) Steel, Matte Tin Plate MTERI:.012 (.30) Spring Steel, Tin-Nickel Plate W.155 [3.9] B D C.015 [0.4].380 [9.7].180 [4.6].375 [9.5].265 [6.7].175 [4.5] MTERI: Frame:.015 (.38) Steel, Tin-Nickel Plate.410 [10.4].062 [1.6].062 [1.6] (3) PS.120 [3.0] FRONT EGS.070 [1.8] W *17335, 17450, 17500, 17650, 18600, cells FIG. 1 FIG. 2 FIG. 3 MTERI: Spring Steel, Tin-Nickel Plate CT. BTTERY BTTERY MTERI NO. FIG. SIZE DIMETER B C D W TICKNESS ( ).187 (4.8).187 (4.8).194 (4.9).320 (8.1).214 (5.4).226 (5.7).010 (.25) 82 2 N ( ).250 (6.4).250 (6.4).280 (7.1).040 (1.0).498 (12.7).228 (5.8).296 (7.5).010 (.25) 52 2 CR2 No Ears.250 (6.4).280 (7.1).032 (0.8).498 (12.7).228 (5.8).250 (6.4).010 (.25) 92 2 CR ( ).312 (7.9).250 (6.4).359 (9.1).050 (1.3).593 (15.1).228 (5.8).369 (9.4).012 (.30) CR ( ).312 (7.9).250 (6.4).359 (9.1).050 (1.3).593 (15.1).228 (5.8).376 (9.5).015 (.38) mm* ( ).350 (8.9).375 (9.5).385 (9.8).062 (1.6).653 (16.6).300 (7.6).438 (11.1).012 (.30) *Battery Reference: 2/3,17335,17450,17500,17650,18500,18650 cells.350 [8.9].156 [4.0].210 [5.3].062 [1.6] (3) PS CR2 (+) POSITIVE BUTTON (-) NEGTIVE SPRING (+) POSITIVE BUTTON (-) NEGTIVE SPRING.055 [1.4] (3) PS.338 [8.6].350 [8.9].120 [3.0].156 [4.0].290 [7.4].550 [14.0].190 [4.8].100 [2.5] (3) PS.190 [4.8].100 [2.5] (3) PS.410 [10.4] MTERI: Frame:.015 (.38) Steel,Matte Tin Plate CT. NO. 595 CT. NO. 628 CT. NO. 637 CT. NO. 629 CR2 Space saving design installs directly onto the PC board Suitable for.062 (1.57) to.093 (2.36) PC boards Reliable spring tension assures low contact resistance Ideal for self-contained battery compartments COI SPRING EF SPRING N 23 MTERI:.010 (.25) Spring Steel, Tin-Nickel Plate N [9.7].180 [4.6] B.265 [6.7] D C.290 [7.4].512 [13.0] TRU OE MOUNT BTTERY CONTCTS.015 [0.4].450 [11.4].150 [3.8].250 [6.3].275 [7.0].360 [9.1].416 [10.6].250 [6.4].045 [1.1].325 [8.2].045 [1.1].360 [9.1].416 [10.6].250 [6.3].160 [4.1].450 [11.4].015 [0.4].350 [8.9].150 [3.8].250 [6.3].045 [1.1].360 [9.1].232 [5.9].416 [10.6].202 [5.1].416 [10.6].360 [9.1].045 [1.1].250 [6.3].160 [4.1].350 [8.9].150 [3.8] CT. NO. 596 CT. NO. 590 CT. NO. 597 CT. NO. 591 RoS COMPINT ~ ISO 9001 CERTIFIED 9

16 RUGGED STEE BTTERY CIPS C D BTTERY CIPS, CONTCTS & CCESSORIES DWG. 1 Non-Insulated Contact FIG. 1 D F MTERI:.016 (.41) Spring Steel, Nickel Plate PORITY INDICTING BE SPECIFICTIONS Clips: Spring Steel, Nickel Plate Contact Eyelets: Brass, Nickel Plate Insulating Washers: Moisture Proof, Resin Impregnated Fibre Solder ugs: Brass, Tin Plate vailable with insulated or non-insulated contact. Positive contact grips battery securely. J M.437 [11.1].093 [2.4].098 [2.5] (2) PS.144 [3.7] ER FOR SODERING Prevents improper connection of battery which may cause damage to electronic equipment. Washers hold securely when snapped over eyelets. Used on our standardized battery holders. For, C & D cells. G B.050 [1.27] No Gluing or Wetting Needed Economical Pressure Sensitive dhesive Back dheres To ll Surfaces Recommended where proper polarity of battery insertion or circuit polarity is to be shown. abels are two color, (+) positive side red; arrow, (-) negative side blue. CT. NO [34.9].062 [1.57] B C.375 [9.5] M NTI-ROTTION TB.050 [1.27].120 [3.0].375 [9.5] Refer to page 32 for Battery Contact ayout & s INSUTED PORIZING WSERS.437 [11.1].093 [2.36].098 [2.5] (2) PS.144 [3.7] ECONOMY CONTCTS Refer to page 32 for Battery Contact ayout & s Designed for mounting in self-contained, non-metallic battery compartments. Reliable spring tension assures low contact resistance. Recessed contact holds battery in place. ll clips have anti-rotation tab. CT. NO. FIG. NO. B C M CE MTG. OE SIZE (15.9).480 (12.2).500 (12.7).128 (3.3) (17.4).547 (13.9).875 (22.2).128 (3.3) C (19.1).562 (14.3) (32.0).128 (3.3) D G B.070 [1.78] J M SODER UG B C BTTERY SPRING CONTCTS 2/3 C D Easy to assemble with eyelets or rivets. Refer to page 142. F.375 [9.5] C (FRONT) CONTCT D DWG. 2 Insulated Contact CT. DWG. STEE BTTERY DIMETER CE NO. NO. B D F G J M TICKNESS MIN. - MX. SIZE (17.9).812 (20.6).593 (15.1).375 (9.5).937 (23.8).500 (12.7).605 (15.4).020 (.51).875 to (22.2 to 28.6) C (19.7) (27.3).750 (19.1).437 (11.1) (30.1).500 (12.7).609 (15.5).020 (.51) to (30.1 to 34.3) D (17.9).609 (15.5).375 (9.5).375 (9.5).609 (15.5).312 (7.9).353 (9.0).015 (.39).531 to.650 (13.5 to 16.5) C D B (BCK) CONTCT CT. CE NO. B C MTERI SIZE (7.4).335 (8.5).100 (2.5).140 (3.6).025 (.64) Dia. Spring Steel, 2/3 Nickel Plate 211-D.850 (21.6).650 (16.5).162 (4.1).300 (7.6).040 (1.0) Dia. Spring Steel, C D Nickel Plate M NTI-ROTTION TB.050 [1.27].120 [3.1].687 [17.5] FIG CT. NO. 59 (RED) CT. NO. 60 (BCK) MTERI: Molded Polyethylene RoS COMPINT ~ ISO 9001 CERTIFIED

17 UMINUM & STEE CIPS Precision made spring clips are available in a wide range of sizes. These clips will hold round, square and rectangular batteries or components with similar dimensions. Clips are manufactured from luminum or Spring Steel W M.437 [11.1] W M W M.437 [11.1] W M.625 [15.9].437 [11.1] DWG. 1 DWG. 2 DWG. 3 DWG. 4 DWG. 5 MTERI: Steel Clips: Spring Steel, Nickel Plate luminum Clips: 2024-T3 CT. NO. DWG. NO. REF: CE SIZE/BTTERTY (SQ.) W M MTERI CE to.468 (9.5 to 11.9).453 (11.5).312 (7.9).625 (15.9).098 (2.5).020 (.51) lum., CR2 CE (14.3).406 (10.3).625 (15.9).098 (2.5).020 (.51) lum to.656 (13.5 to 16.7).562 (14.3) (28.6).625 (15.9).098 (2.5).015 (.39) Steel C CE (23.4).937 (23.8).625 (15.9).098 (2.5).020 (.51) Steel to (22.2 to 28.6).921 (23.4).937 (23.8).625 (15.9).098 (2.5).020 (.51) lum. 97* (28.6) (52.4).625 (15.9).098 (2.5).020 (.51) lum. D CE (30.9) (31.8).625 (15.9).098 (2.5).032 (.81) lum to (30.1 to 34.9) (30.9).562 (14.3).500 (12.7).136 (3.5).020 (.51) Steel (36.5) (67.5) (25.4).098 (2.5).032 (.81) lum., 2/3 CE to.690 (16.7 to 17.0).740 (18.8) (34.1).625 (15.9).098 (2.5).025 (.64) lum. 9 VOT CE (15.1) (26.2).687 (17.4) (26.2).625 (15.9).098 (2.5).015 (.39) Steel (16.5) (26.5).765 (19.4) (26.7).625 (15.9).098 (2.5).015 (.39) Steel (17.5) (26.5).825 (21.0) (27.2).625 (15.9).098 (2.5).015 (.39) Steel (16.5) (26.5) (30.1).675 (17.1).625 (15.9).098 (2.5).015 (.39) Steel (16.5) (26.5) (28.6).656 (16.7).625 (15.9).098 (2.5).020 (.51) lum. NiCd CE to (34.9 to 38.1) (36.3) (30.9).812 (20.6).157 (4.0).025 (.64) Steel to (36.5 to 42.8) (38.9) (34.9).812 (20.6).157 (4.0).025 (.64) Steel to (50.8 to 63.5) (54.8) (42.8).812 (20.6).157 (4.0).025 (.64) Steel SUB-C CE to.890 (21.8 to 22.6).906 (23.0).828 (21).468 (11.9).157 (4.0).020 (.51) Steel *ONY TWO MOUNTING OES Prevents battery from loosening in battery holder Retainer clip slips on the ears of the battery holder clip BTTERY RETINER CIPS W M [28.6] CR2 C D.437 [11.1] BTTERY & COMPONENT CIPS Used with Keystone Battery Clips Used with Keystone Battery Clips Used with Keystone Cat. No. 91, 92, 95, 99, 100 and Cat. No. 86, 87, 93 and 222. Battery Clips Cat. No. 88, 89 and 94. MTERI: Stainless Steel MTERI: Spring Steel, Nickel Plate MTERI: Spring Steel, Nickel Plate CT. NO. 61 CT. NO. 62 CT. NO. 63 RoS COMPINT ~ ISO 9001 CERTIFIED 11

18 SNP-ON CONTCTS Economical and reliable contacts are ideal for molded cases with self contained battery compartments Solder ear to facilitate soldering of wire lead Unique spring tension contact adjusts to variations in battery length Reliable spring tension contacts assure low contact resistance Clips easily onto.060 (1.52) to.070 (1.78) wall Sharp barbs securely anchor contact in place Refer to page 34 for Battery Contact ayout & s BTTERY CONTCTS FOR MODED CSES [6.4].358 [9.1].062 [1.57].322 [8.2] CT. NO. 204 MTERI:.010 (.25) Spring Steel, Nickel Plate CT. NO. 238 CT. NO. 202 MTERI:.010 (.25) Spring Steel, Nickel Plate CT. NO. 294 CT. NO. 295 MTERI:.010 (.25) Spring Steel, Nickel Plate CT. NO. 296 CT. NO. 209 CT. NO. 288 CT. NO [4.8].358 [9.1].358 [9.1].341 [8.7].341 [8.7].358 [9.1].109 [2.8].187 [4.6].187 [4.8].660 [16.8].410 [10.4] TYP. TYP..180 [4.6] RoS COMPINT ~ ISO 9001 CERTIFIED.047 [1.19].281 [7.1].302 [7.7].021 [.53].011 [.29].180 [4.6].234 [5.9].338 [8.6].187 [4.8] MTERI:.010 (.25) Spring Steel, Nickel Plate.180 [4.6].660 [16.8].410 [10.4].300 [7.6].338 [8.6].187 [4.76].125 [3.18] MTERI:.010 (.25) Spring Steel, Nickel Plate.187 [4.8].660 [16.8].187 [4.8].660 [16.8].021 [.53].410 [10.4].021 [.53].410 [10.4].180 [4.6].062 [1.6].055 [1.4] MTERI: 012 (.30) Spring Steel, Nickel Plate.570 [14.5] MTERI: 012 (.30) Spring Steel, Nickel Plate The (2) two leaf contacts are held together by a web. This design offers greater stability..055 [1.4].254 [6.5].254 [6.5].254 [6.5].256 [6.5].256 [6.5].250 [6.4].312 [7.9].820 [20.8].250 [6.3].476 [12.1].820 [20.8] [6.3] [6.3].570 [14.5] MTERI:.012 (.30) Spring Steel, Nickel Plate N 12V.250 [6.3] CR2 The (2) two leaf contacts are separate, allowing a divider between the batteries..461 [11.7].461 [11.7] CT. NO. 228 CT. NO. 292 CT. NO. 291 Right CT. NO. 290 eft (shown).358 [9.1].062 [1.57].375 [9.5] REF.375 [9.5].027 [0.7].449 [11.4].025 [0.6].341 [8.7] TYP. MTERI:.010 (.25) Spring Steel, Nickel Plate MTERI: 010 (.25) Spring Steel, Nickel Plate.240 [6.1].450 [11.4].035 [.89].820 [20.8].570 [14.5].150 [3.8] MTERI: 010 (.25) Spring Steel, Nickel Plate.250 [6.4].240 [6.1].256 [6.5].175 [4.4].312 [7.9].240 [6.1].175 [4.4] MTERI: 012 (.30) Spring Steel, Nickel Plate.450 [11.4].370 [9.4].820 [20.8] [6.3] [6.3].570 [14.5]

19 SIDE-IN MOUNT CONTCTS Economical and reliable contacts are ideal for molded cases with self contained battery compartments Solder ear to faciltate soldering of wire lead Unique spring tension contact adjusts to variations in battery lengths Reliable spring tension contacts assure low contact resistance Clips easily onto.060 (1.52) to.070 (1.78) wall Sharp barbs securely anchor contact Refer to page 34 for Battery Contact ayout & s SERRTED SURFCE.500 [12.7].276 [7.0].827 [21.0].276 [7.0].300 [7.6].394 [10.0].428 [10.9].079 [2.01].197 [5.0].300 [7.6] MIN..611 [15.5].062 [1.6] CT. NO MTERI:.012 (.30) Phosphor Bronze, Nickel Plate CT. NO [5.08].437 [11.1] CT. NO MTERI:.012 (.30) Spring Steel, Nickel Plate CT. NO [1.2] Economical and reliable contacts Designed for direct placement onto PCB, no wire leads required Unique spring tension adjusts to variations in battery length.055 [1.39] (2) PS.050 [1.26].150 [3.8] CT. NO Off-Board edge mounting design frees up valuable board space.528 [13.4] CR2 9V N 12V.200 [5.1].100 [2.5].025 [0.64].120 [3.1] MTERI:.008 (.20) Spring Steel, Nickel plate Press fit into housing groove. SIDE-IN P.C. MOUNT CONTCTS.187 [4.7].405 [10.3].170 [4.3] RoS COMPINT ~ ISO 9001 CERTIFIED SERRTED SURFCE.276 [7.0] (2) PS.875 [22.2].300 [7.6].944 [24.0].826 [21.0].060 [1.5].500 [12.7] [10.9] [14.0] [10.0] [8.5].060 [1.52].062 [1.6].300 [7.6] MTERI:.012 (.30) Phosphor Bronze, Nickel Plate.437 [11.1].048 [1.2] MTERI:.012 (.30) Spring Steel, Nickel Plate Reliable spring tension assure low contact resistance and dependable connection Symmetrical design allows these contacts to function both as a positive and negative contacts.250 [6.4].265 [6.7].038 [.97].156 [4.0].220 [5.6].030 [.76] CT. NO CT. NO CT. NO. () ength (21.3) (25.4).187 [4.8].334 [8.5].466 [11.8].110 [2.8].500 [12.7].300 [7.6] MTERI:.012 (.30) Spring Steel, Nickel plate UNIVERS BTTERY SIZES.050 [1.27].045 [1.14] CT. NO MTERI:.012 (.30) Phosphor Bronze, Tin-Nickel plate.545 [13.8].170 [4.3].250 [6.4].300 [7.6].038 [.97].156 [4.0].250 [6.3] Made from corrosion resistant Stainless Steel.156 [4.0].200 [5.1].350 [8.9].150 [3.8].030 [0.76].343 [8.7].100 [2.5].550 [14.0].038 [0.97].720 [18.3].030 [.76] MTERI:.012 (.30) Stainless Steel, Tin-Nickel plate BTTERY CONTCTS FOR MODED CSES 13

20 Economical and reliable contacts are ideal for molded cases with self contained battery compartments Solder tab design for either wire lead or PC mounting Unique spring contacts adjust to variations in battery lengths Reliable spring contacts assure low contact resistance and a dependable connection Space saving, economical, excellent mechanical construction SPRING & BUTTON CONTCTS BTTERY CONTCTS FOR MODED CSES MTERI: Plate:.020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate CT. NO CT. NO [1.24].055 [1.40] (-) NEGTIVE SPRING.315 [8.0].043 [1.09].157 [4.0].055 [1.40] DIMPE (-) NEGTIVE SPRING WIT TB.409 [10.4].032 [0.81].059 [1.50].362 [9.2].217 [5.5].055 [1.40].061 [1.55].334 [8.5].062 [1.57].051 [1.30].118 [3.0].295 [7.5] (+) POSITIVE BUTTON.425 [10.8].669 [17.0].315 [8.0].050 [1.27].228 [5.8].062 [1.57].236 [6.0] DU BUTTON CONTCT CT. NO [11.3].049 [1.24].055 [1.40] CT. NO N 12V (+) POSITIVE BUTTON WIT TB.409 [10.4].032 [0.81].059 [1.50] (+) POSITIVE BUTTON CT. NO CT. NO [8.0].362 [9.2].043 [1.09].055 [1.40] DIMPE.217 [5.5].062 [1.57].051 [1.30].118 [3.0] CR2.157 [4.0].125 [3.2].197 [5.0] Refer to page 35 for Battery Contact ayout & s.315 [8.0].669 [17.0] CT. NO [11.0] CT. NO [1.40].061 [1.55] DU CONTCT (RIGT) DU CONTCT (EFT).295 [7.5] (-) NEGTIVE SPRING.425 [10.8].276 [7.0].050 [1.27].228 [5.8].062 [1.57] DU SPRING CONTCT.827 [21.0].453 [11.5].059 [1.50].177 [4.5] (2) PS.070 [1.78].378 [9.6] (2) PS.334 [8.5].445 [11.3].295 [7.5].970 [24.6].551 [14.0].970 [24.6].551 [14.0].414 [10.5] [7.1] [6.4].500 [12.7].250 [6.4].500 [12.7].100 [2.5] (2) PS.098 [2.5] (2) PS.140 [3.6].098 [2.5] CT. NO CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED

21 SPRING & BUTTON CONTCTS Economical and reliable contacts are ideal for molded cases with self contained battery compartments Solder tab design for either wire lead or PC mounting Unique spring contacts adjust to variations in battery lengths Reliable spring contacts assure low contact resistance and a dependable connection Space saving, economical, excellent mechanical construction MTERI: Plate:.020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate CR2 Refer to page 35 for Battery Contact ayout & s (-) NEGTIVE SPRING (+) POSITIVE BUTTON DU CONTCT ( ONY).055 [1.4].425 [10.8].250 [6.4].414 [10.5].062 [1.57].500 [12.7] CT. NO CT. NO [10.8].057 [1.4].280 [7.1].055 [1.40] [6.4].062 [1.57] (-) NEGTIVE SPRING WIT TB (+) POSITIVE BUTTON WIT TB.275 [7.0].118 [3.0].441 [11.2].472 [12.0].414 [10.5].067 [1.70].060 [1.52].722 [18.3] CT. NO CT. NO [12.0].118 [3.0].441 [11.2].057 [1.4].236 [6.0].275 [7.0] [12.7].067 [1.70].060 [1.52] (-) NEGTIVE SPRING WIT TB/NCE (+) POSITIVE BUTTON WIT TB/NCE.441 [11.2].414 [10.5].441 [11.2].057 [1.4].236 [6.0].722 [18.3].140 [3.6].295 [7.5].157 [4.0].970 [24.6].551 [14.0] CT. NO eft or Right.250 [6.4].098 [2.5].906 [23.0].551 [14.0] CT. NO. 521O eft CT. NO Right (Shown) DU CONTCT ( ONY).970 [24.6].551 [14.0].414 [10.5].472 [12.0].500 [12.7].414 [10.5].067 [1.70].079 [2.00] DU CONTCT WIT TB ( ONY).414 [10.52].728 [18.5] BTTERY CONTCTS FOR MODED CSES [12.0].722 [7.0] [18.3].472 [12.0].275 [7.0].722 [18.3].295 [7.5].470 [11.9].728 [18.5].118 [3.0].067 [1.70].060 [1.52] CT. NO CT. NO [3.0].067 [1.70].060 [1.52] RoS COMPINT ~ ISO 9001 CERTIFIED.157 [4.0] CT. NO eft CT. NO Right (Shown).067 [1.70].079 [2.00] 15

22 SPRING & BUTTON CONTCTS Economical and reliable contacts are ideal for molded cases with self contained battery compartments Solder tab design for either wire lead or PC mounting Unique spring contacts adjust to variations in battery lengths Reliable spring contacts assure low contact resistance and a dependable connection Space saving, economical, excellent mechanical construction BTTERY CONTCTS FOR MODED CSES MTERI: Plate:.020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate.750 [19.0].062 [1.57].061 [1.55].433 [11.0].750 [19.0].392 [10.0].728 [18.5].610 [15.5] (+) POSITIVE BUTTON.062 [1.57] (+) POSITIVE BUTTON R.492 [R12.5].059 [1.50] DI.165 [4.2].157 [4.0].905 [23.0].295 [7.5].059 [1.50] [32.0] DU CONTCT DU CONTCT [56.5] [33.5].061 [1.55].394 [10.0] Refer to page 35 for Battery Contact ayout & s.750 [19.0].728 [18.5].610 [15.5].847 [21.5] (-) NEGTIVE SPRING.062 [1.57].059 [1.50] DI.165 [4.2].157 [4.0].905 [23.0].646 [16.41 CT. NO CT. NO CT. NO [9.5] [42.0].984 [25.0] C CE D CE.098 [2.5] CT. NO CT. NO [16.4].750 [19.0] (-) NEGTIVE SPRING R.492 [R12.5].750 [19.0].847 [21.50].059 [1.50] [32.0].413 [10.5] [27.6] CT. NO eft CT. NO Right (Shown) 16 RoS COMPINT ~ ISO 9001 CERTIFIED

23 18650 ITIUM-ION BTTERY ODERS CE NOTE: PC Mount Battery Clip vailable See Page 9. FETURES ow profile surface mount holder for Cylindrical ithium and alkaline batteries U 94V-0 heat resistant nylon housing well suited for reflow soldering Battery installation and removal does not require tools SPECIFICTIONS Base: igh Temp Nylon 46, U 94V-0 Contacts:.012 (.30) Phosphor Bronze, Tin-Nickel Plate CT. NO [18.0].709 [18.0] [39.8] [35.0] TRU OE MOUNT.630 [16.0].813 [20.7].130 [3.3].140 [3.6] TYP..753 [19.1].130 [3.3].145 [3.7] Operating Temp Range: -60ºF to +290ºF (-50ºC to +145ºC) [77.1] [68.9] [55.2].145 [3.7] [71.6].062 [1.57] x.062 [1.6] [71.6].136 [3.45] (2) PS [55.2] [77.1] [68.9].047 [1.19] (2) PS.630 [16.0] [55.2] [71.6] Securely holds battery in place Polarity clearly marked for orientation ccomodates cells with or without built-in PCB protection circuits.094 [2.39] (2) PS.062 [1.57] X.062 [1.57]. SINGE CE DU CE CT. NO [18.0].709 [18.0] [39.8] [35.0].630 [16.0] SPECIFICTIONS Base: igh Temp Nylon 46, U 94V-0 Contacts:.012 (.30) Phosphor Bronze, Gold Plate (Flash) PPICTIONS Computer memory, power backup systems Digital readers aptop and touch pad computers PC and industrial controls SURFCE MOUNT.813 [20.7].130 [3.3] D.130 [3.3].145 [3.7].145 [3.7].250 [6.4] MIN..753 [19.1].136 [3.5] (2) PS [86.0] [77.1] [68.9] [55.2].062 [1.57] x.062 [1.6]. Pad ayout [86.0] MIN..289 [7.3] MIN [55.2].094 [2.4] (2) PS [77.1] [86.0] [68.9] [55.2].062 [1.57] X.062 [1.57]. Pad ayout.630 [16.0] D ITIUM-ION BTTERY ODERS SPECIFICTIONS Base: igh Temp Nylon 46, U 94V-0 Contacts:.012 (.30) Phosphor Bronze, Tin-Nickel Plate CT. NO [1.2] (4) PS.136 [3.45] (2) PS.125 [3.18] (2) PS.753 [19.1] [55.2] [71.6] [35.0].094 [2.4] CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED SPECIFICTIONS Base: igh Temp Nylon 46, U 94V-0 Contacts:.012 (.30) Phosphor Bronze, Gold Plate (Flash) [86.0] MIN..289 [7.3] MIN [55.2].250 [6.4] (2) PS. MIN..094 [2.4].136 [3.5] (2) PS [19.1] [35.0] 17

24 TM OW PROFIE ITIUM & KINE CE ODERS 1/3N 1/2 CR2 2/3 FETURES Snap In PC contact holds firmly in position for wave soldering Tin Nickel Plated contacts for excellent solderability and durability Polarity clearly marked for orientation Snap on retainer cover (optional) retains battery securely to withstand shock and vibration. elps protect against shorting. Tamper proof. PPICTIONS Computer memory, power backup systems. Telecommunications Residential, industrial and commercial security systems PC and industrial controls 1024C TM OW PROFIE 108C 1028C 1029C RETINER COVERS W B MX. F G (2) PS..094 [2.39].047 [1.19] TM BTTERY ODERS C RETINER COVER SPECIFICTIONS Base/Retainer Cover: PBT, U 94V-0 Contacts:.012 (.30) Stainless Steel, Tin-Nickel Plate Operating Temp Range: 60ºF to +290ºF ( 50ºC to +145ºC).140 [3.6] 1020C 1024C RETINER COVERS 1018C B MX. 1022C SPECIFICTIONS Base: igh Temp Nylon 46, U 94V 0 Contacts:.012 (.30) Phosphor Bronze, Tin-Nickel Plate Operating Temp Range: -60ºF to +290ºF (-50ºC to +145ºC) Finish: Tin-Nickel Plate F.038 [0.97] W.062 [1.57] X.062 [1.57]. EG TM UTR OW PROFIE.078 [2.0] OE.050 x.050.eg B MX.025 [.64] (2) PS Tel (718) Fax (718) (800) kec@keyelco.com RoS COMPINT ~ ISO 9001 CERTIFIED G REF F.047 [1.2] OE (4) PS.050 [1.3] x.050 [1.3]. EG.038 [0.97] ODER COVER CT. CT. B CE NO. NO. W (Ref. Dim) (MX) F G SIZE BTTERY CROSS REFERENCE C (29.5).640 (16.3).633 (16.1) (26.2) (34.5).610 (15.5).279 (7.1) Energizer 544, CR2, Duracell PX28, CR2, Kodak K28 & KS28, 1/2 CR2, Panasonic CR14250, CR2, Saft CP3, Maxell 4R44, CR2, CR2 Sanyo CR14250SE, CR C 1028C (54.9).640 (16.3).633 (16.1) (51.8) (59.9) (40.9).279 (7.1) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran 1029C Duracell D2/3, Kodak K123, Panasonic CR123, C (38.1).720 (18.3).712 (18.1) (34.9) (43.2).950 (24.1).320 (8.1) 2/3 Saft 450SC & VR0450, Sanyo CR17335SE DU W W Finish: Tin-Nickel Plate Finish: Tin Plate.140 [3.56].038 [0.97] (REF) BTTERY REESE (2) PS..050 [1.22] x.060 [1.52]. DWG. 1 B MX..178 [4.5] (REF) G.031 [.79] G.140 [3.6].078 [1.98].047 [1.19] DWG. 2 DWG. 3 ODER COVER CT. CT. DWG B CE NO. NO. NO. W (Ref. Dim) (MX) F G SIZE BTTERY CROSS REFERENCE C (54.5).612 (15.5).603 (15.3) (51.8) (59.9).265 (6.7) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran C (54.5) (30.0).603 (15.3) (51.8) (59.9).568 (14.4).265 (6.7) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran C (49.1).500 (12.7).445 (11.3) (46.0) (54.4).209 (5.3) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran C (49.1).875 (22.2).445 (11.3) (46.0) (54.4).430 (10.9).182 (4.6) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran.053 [1.35] DI.032 [.81] DI (2) PS C (37.8).720 (18.3).682 (17.3) (42.9) (42.9) Duracell D2/3, Kodak K123, Panasonic CR123, Saft 450SC & VR0450,.319 (8.1) 2/3 Sanyo CR17335SE C (29.4).612 (15.5).603 (15.3) (26.2) (34.5) Energizer 544, Duracell PX28, Kodak K28 & KS28, Saft CP3,.265 (6.7) 1/2 Maxell 4R44, Sanyo CR14250SE (11.4).540 (13.7).506 (12.9).430 (10.9).570 (14.5).240 (6.1) 1/3 N Duracell D1/3N, Sanyo K58, Energizer CR1/3N SINGE 1/3N th Road storia, NY

25 SMT OW PROFIE ITIUM & KINE CE ODERS FETURES ow profile surface mount holders for Cylindrical ithium and lkaline batteries U 94V-0 eat resistant Nylon ousings well suited for reflow soldering Designed for vacuum pick and place assembly Gold-plated Phosphor Bronze contacts assure low contact resistance and are readily solderable 1018C RETINER COVER 1024C RETINER COVER 1/3N 1/2 2/3 Ideal for both lead free solder and traditional solder process Battery installation and removal does not require tools Securely holds battery in place Polarity clearly marked for orentation Operating temp range: -60ºF to +290ºF (-50ºC to +145ºC) SMT UTR OW PROFIE B MX. VIBE ON TPE ND REE PPICTIONS Computer memory, power backup systems Telecommunications Residential, industrial and commercial security systems PC and industrial controls.250 [6.3] (2) PS G.078 [2.0] OE. MIN W.289 [7.3] MIN. MIN. SPECIFICTIONS Base: igh Temp Nylon 46, U 94V-0 Contacts:.012 (.30) Phosphor Bronze, Gold Plate (Flash) SPECIFICTIONS Base: igh Temp Nylon 46, U 94V-0 Contacts:.012 (.30) Phosphor Bronze, Gold Plate (Flash) Operating Temp: -60 F to +290 F (-50 C to +145 C) B MX. F W.050 x.050.eg CT. NO. ON TPE B CE TPE & REE SPECS BUK & REE COVER W (REF) (MX) G SIZE PCKED ON 13 REE BTTERY CROSS REFERENCE 56mm wide, 24mm pitch Energizer 544, Duracell PX28, Kodak K28 & KS28, TR 1024C (43.8).612 (15.5).603 (15.3) (26.2) (34.5).265 (6.7) 1/2 125 pcs/reel Panasonic CR14250, Saft CP3, Maxell 4R44, Sanyo CR14250SE TR 1024C (68.9).612 (15.5).603 (15.3) (51.8) (59.9).265 (6.7) 88mm wide, 28mm pitch, Energizer, Duracell, Panasonic, Sanyo, 100 pcs/reel Varta, Rayovac, Tadiran TR 1018C (52.2).720 (18.3).682 (17.3) (34.7) (42.9).319 (8.1) 2/3 72mm wide, 32mm pitch, Duracell D2/3, Kodak K123, Panasonic CR123, 100 pcs/reel Saft 450SC & VR0450, Sanyo CR17335SE 1020C RETINER COVERS 1022C DU G.078 [2.0] OE SMT UTR OW PROFIE F MIN. MIN. B MX..050 [1.3] x.050 [1.3]. EG DWG 1 B MX. W SINGE 1/3N (2) PS (2) PS. BTTERY REESE (2) PS. W G.118 [3.0] G.078 [1.98] OE MIN MIN.053 [1.3] DI MIN.156 [4.0] SMT BTTERY ODERS.050 [1.3] x.050 [1.3]. EG DWG 2 DWG 3 CT. NO. ON TPE DWG B CE TPE ND REE SPECS BUK & REE COVER NO. W (REF) (MX) F G SIZE PCKED ON 13 REE BTTERY CROSS REFERENCE TR 1020C (61.5).500 (12.7).445 (11.3) (46.0) (54.4).209 (5.3) 88mm Wide, 24mm pitch, 200 pcs/reel Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran TR 1022C (61.5).875 (22.2).445 (11.3) (46.0) (54.4).430 (10.9).182 (4.6) 88mm Wide, 32mm pitch, 125 pcs/reel Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran TR 1024C (68.9).612 (15.5).603 (15.3) (51.8) (59.9).265 (6.7) 88mm wide, 28mm pitch, 100 pcs/reel Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran TR 1012C mm Wide, 48mm pitch, Energizer, Duracell, Panasonic, (68.9) (30.0) (15.3) (51.8) (59.9) (14.4) (6.7) 100 pcs/reel Sanyo, Varta, Rayovac, Tadiran TR (19.0).540 (13.7).506 (12.9).430 (10.9).570 (14.5).240 (6.1) 1/3 N 44mm Wide, 24mm pitch, 125 pcs/reel Duracell D1/3N, Sanyo K58, Energizer CR1/3N RoS COMPINT ~ ISO 9001 CERTIFIED 19

26 SMT & TM PORIZED ITIUM CE ODERS FETURES ow profile surface mount and Thru ole Mount olders for ithium batteries U 94V-0 eat resistant Nylon ousings well suited for reflow or wave soldering. CR2 CR123 Battery installation and removal does not require tools. Securely holds battery in place Polarized holder offers circuit protection against improper battery installation PPICTIONS Computer memory, power backup systems Telecommunications Residential, industrial security systems PC and industrial controls B MX. B MX. Thru-ole Mount (TM) (REF) W 1018C RETINER COVER FITS ODERS (REF).250 [6.35] Surface Mount (SMT) ITIUM BTTERY ODERS B.078 [1.98].047 [1.19] OE (2) PS CT. NO CT. NO [0.97] TYP..050 [1.27] x.050[1.27]. EG SPECIFICTIONS Base: igh Temp Nylon 46, U Rated 94V-0 Contacts:.012 (1.30) Phosphor Bronze, Gold Plate (Flash) - SMT.012 (1.30) Phosphor Bronze, Tin-Nickel Plate - TM Operating temp range: -60 F to 290 F (-50 C to 145 C) RUGGED STEE & UMINUM ITIUM CE ODERS 6 VOT ITIUM CE ODERS.437 [11.1] B.078 [1.98].289 [7.3] MIN. TYP [39.5] [28.6] MIN. TYP Sturdily constructed of quality materials Contacts made from Brass, Nickel Plate Ideal for punishing applications STEE ODERS 1/2 BTTERY CROSS REFERENCE Energizer: 544, Duracell: PX28, Kodak: K28 & KS28, [3.66].128 [3.25] [13.5] Panasonic: CR14250, Sanyo: CR14250SE, Saft: CP3, OE OE (2) PS Maxell: 4R [15.9] [11.1] CT. NO.1103 UMINUM ODERS 2/3.140 [3.6].050 [1.27] x.050[1.27]. EG CT. MOUNTING CE NO. STYE W (Ref) B (MX) G SIZE 1010 SMT (43.8) 1011 TM (29.4).612 (15.5).661 (16.8) (26.2) (34.5).265 (6.7) CR SMT (52.4) 1051 TM (37.8).720 (18.3).712 (18.1) (34.7) (42.9).319 (8.1) CR123 CT. NO [11.1].750 [19.1].750 [19.1] [29.4] [28.6] [37.4].606 [15.4].356 [9.0].625 [15.9].111 [2.8] OE TYP..625 [15.9].437 [11.1].430 [10.9] [31.1].531 [13.5].144 [3.7] OE.128 [3.3] OE (2) PS.082 [2.1] DI OE (2) PS. P/N [11.1] BTTERY CROSS REFERENCE Duracell: D2/3, Kodak: K123, Sanyo: CR173335SE, Saft: 450SC & VR [3.0] DI OE (4) PS..082 [2.08] DI OE (2) PS. FOR P/N 131 ONY [42.1].415 [10.5] [25.4].750 [19.1] [28.6] (2) PS PORIZING TB SPRING [28.58].415 [10.54] [42.06] [19.05] [25.40].125 [3.18] (2) PS PORIZING TB SPRING 20 Polarizing Tab for proper orientation ightweight, ideal for rugged applications D223 or Equivalent Batteries SPECIFICTIONS Frame: luminum 2024-T3 Terminals: Brass, Tin Plate Spring Contacts:.025 (.64) Dia. Spring Steel, Nickel Plate.648 [16.5].750 [19.1] RoS COMPINT ~ ISO 9001 CERTIFIED.238 [6.1].600 [15.2].075 [1.9] CT. NO. 224 CT. NO [4.75] TB.836 [21.25].648 [16.46].205 [5.21] TB.600 [15.24].239 [6.06]

27 UMINUM ODERS CONNECTED IN SERIES EIMINTES WIRING BOR SVING Features pre-connected jumper strap insulated from the luminum base. Batteries held in series circuit without need of additional wiring. 2 CE EIMINTES WIRING BOR SVING For printed circuitry we have standardized our most popular holders with PC ugs. Choice of single or multiple holders assembled with Cat. No lug. C and D assembled with Cat. No lug. 1 CE.082 [2.1] DI, TYP EIMINTES WIRING BOR SVING For printed circuitry we have standardized our most popular holders with PC ugs. Choice of single or multiple holders assembled with Cat. No lug. C and D assembled with Cat. No lug. 1 CE.082 [2.1] DI, TYP 4 CE W W 2 CE 2 CE 3 CE CE C CE D CE CT. NO. CE ODS NO. OF CES C CE C E D CE IEC R6 R14 R20 UMINUM ODERS WIT PC UGS CT. NO. CE C CE D CE MOUNTING OE DETIS NSI/NED BTTERY CROSS REFERENCE W IEC NSI/NED (57.2) (57.2) (56.3) (56.3) (68.3) (68.3) STEE ODERS WIT PC UGS CT. NO. ODS NO. OF CES ODS NO. OF CES MOUNTING OE PTTERN BTTERY CROSS REFERENCE BTTERY.531 (13.4) ( O.D (48.4) SIZE.565 (14.5) (50.5) ) BTTERY.875 (22.2) ( O.D (47.6) SIZE 1.125(28.6) (50.0) ) ( O.D. BTTERY (30.1) (58.7) SIZE (34.9) (61.3) ( O.D. ) BTTERY.531 (13.4) (48.4) SIZE.565 (14.5) (50.5) _ R6.625 (15.9) ( O.D. ) BTTERY.875 (22.2) (47.6) SIZE (28.6) (50.0) _ R (25.4) BTTERY (30.1) (58.7) SIZE (34.9) (61.3) _ R (33.3) ( O.D. ) ) BTTERY CROSS REFERENCE W IEC NSI/NED (56.0) (56.0) (59.5) (59.5) (66.7) (66.7) RoS COMPINT ~ ISO 9001 CERTIFIED ( O.D. ) BTTERY.531 (13.4) (48.4) SIZE.565 (14.5) (50.5) _.750 (19.1) R6 ( O.D. ) BTTERY.875 (22.2) (47.6) SIZE (28.6) (50.0) _ R (30.2) BTTERY (30.1) (58.7) SIZE (34.9) (61.3) _ R (39.7) ( O.D. ) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran INTERCONNECT BTTERY ODERS 21

28 RUGGED & IGTWEIGT UMINUM BTTERY ODERS ightweight yet strong, constructed of aircraft grade aluminum. Batteries snap-fit securely into clips. Contacts: Brass, Nickel Plate ugs: Brass, Tin Plate Frame and Battery Clips: luminum Insulating Washers: Moisture Proof Resin impregated fiber MODIFICTIONS We welcome the opportunity to quote on variations of standard items. Use our engineering service for your custombuilt holders. olders with PC and Quick-Fit terminalsavailable on special order. UMINUM BTTERY ODERS ODS CT. NO. OF FIG. NO. CES NO. CE CE C CE * ** D CE * ** *** N OR 12V CE R03 R6 R14 R R ITIUM 2/3 OR CR123 CE BTTERY CROSS REFERENCE IEC NSI/NED MNUFCTURERS BTTERY.375 (9.5) ( O.D (42.5) SIZE.468 (11.9) (44.5) ) CR C 9 VOT BTTERY 203P 1604, 1290 PGE 31 6R C, * 1 Single clip holds 2 batteries in place. ** 2 Clips hold 4 batteries in place. ** 3 Clips hold 6 batteries in place Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ( O.D. ) BTTERY.531 (13.4) (48.4) SIZE.565 (14.5) (50.5) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ( O.D. ) BTTERY.875 (22.2) (47.6) SIZE 1.125(28.6) 1.969(50.0) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ( O.D. ) BTTERY (30.1) (58.7) SIZE (34.9) (61.3) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran BTTERY.375 (9.5) (28.2) ( O.D. SIZE.468 (11.9) (30.2) ) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ll major manufactures Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran FIG. 1 FIG. 3 FIG. 4 4 CE FIG. 2 1 CE 2 CE 2 CE 4 CE 3 CE 6 CE CT. NO CE CT. NO. 193 CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED

29 DIMENSION DRWINGS FOR UMINUM BTTERY ODERS MTERI SPECIFICTIONS Insulating Washers: Moisture proof, resin impregnated fibre Frame and Clips: luminum 2024-T3 Terminal ugs: Brass, Tin Plate Contact Eyelet: Brass, Nickel Plate M (MOUNTING OES) M (MOUNTING OES) J W J W C C DWG. 1 DWG. 2 J M(MOUNTING OES) C K W DWG. 3 DWG. 4 W C K J M CT. DWG. NO. NO. Width Of Base ength Of Base eight Of Base eight to Battery Center eight Distance Between Battery Contacts Mounting oles Width Mounting oles ength Mounting oles (Diameter) CE (11.1) (48.6).467 (11.9).281 (7.1) _.250 (6.4) (38.1).111 (2.8) (20.6) (48.6).467 (11.9).281 (7.1).437 (11.1) _.875 (22.2).144 (3.7) (31.8) (48.6).467 (11.9).281 (7.1).437 (11.1).438 (11.1).875 (22.2).144 (3.7) (42.8) (48.6).467 (11.9).281 (7.1).437 (11.1).875 (22.2).875 (22.2).144 (3.7) CE (15.9) (54.4).578 (14.7).392 (10.0) _.406 (10.3) (38.1).111 (2.8) (28.6) (54.8).562 (14.3).375 (9.5).625 (15.9) _ (30.9).144 (3.7) (44.5) (54.4).578 (14.7).392 (10.0).625 (15.9).625 (15.9) (30.9).144 (3.7) (67.5) (54.4).615 (15.6).421 (10.7).718 (18.2) (36.5) (30.9).144 (3.7) (15.9) (104.4).593 (15.1).406 (10.3) _.437 (11.1) (76.2).128 (3.3) (28.6) (104.0).593 (15.1).406 (10.3).625 (15.9) _ (78.6).144 (3.7) (44.5) (104.0).593 (15.1).406 (10.3).625 (15.9).625 (15.9) (79.4).144 (3.7) C CE (19.1) (53.2).968 (24.6).613 (15.6) _.437 (11.1) (38.1).144 (3.7) 174 3* (41.3) (53.2) (28.4).613 (15.6) (25.4) _ (31.75).144 (3.7) (19.1) (102.8).968 (24.6).593 (15.1) _.500 (12.7) (80.9).144 (3.7) (72.1) (54.0).968 (24.6).593 (15.1) (28.6) (28.6) (31.8).144 (3.7) 196 4** (41.3) (103.5) (28.4).593 (15.1) (25.4) _ (80.9).144 (3.7) (73.0) (103.5).968 (24.6).593 (15.1) (29.2) (25.4) (80.9).144 (3.7) D CE (25.4) (65.1) (32.1).763 (19.4) _.750 (19.1) (44.5).128 (3.3) 176 3* (52.4) (65.1) (37.3).741 (18.8) (33.3) _ (38.1).144 (3.7) (25.4) (125.0) (32.1).747 (19.0) _.687 (17.4) (104.8).128 (3.3) (85.7) (65.1) (32.1).775 (19.7) (34.3) (28.6) (49.2).144 (3.7) 200 4** (52.4) (123.7) (37.3).741 (18.8) (33.3) _ (111.1).144 (3.7) (85.7) (125.0) (32.1).775 (19.7) (34.1) (28.6) (108.0).144 (3.7) 205 4*** (52.4) (184.7) (37.3).741 (18.8) (33.3) _ (171.5).144 (3.7) N OR 12V CE (11.1) (33.7).483 (12.3).297 (7.5) _.250 (6.4).906 (23.0).111 (2.8) (23.8) (34.2).483 (12.3).297 (7.5).500 (12.7) _.875 (22.2).128 (3.3) (38.1) (34.2).483 (12.3).297 (7.5).531 (13.5).562 (14.3).875 (22.2).111 (2.8) 2/3 CE (15.9) (37.4).625 (15.9).437 (11.1) _.437 (11.1) (28.6).111 (2.8) 9 VOT BTTERY 203-P (28.6) (50.8).797 (20.2) _ (28.6) (48.3).718 (18.2) _ * (28.6) (48.3).857 (21.8) _ (28.6) (48.3).812 (20.6) _ * 1 Single clip holds both batteries in place. ** 2 Clips hold four batteries in place. *** 3 Clips hold six batteries inplace. DIMENSIONS RE FOR REFERENCE ONY J M RoS COMPINT ~ ISO 9001 CERTIFIED (MOUNTING OES) C K W UMINUM BTTERY ODERS 23

30 RUGGED STEE BTTERY ODERS n established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening. Refer to page 10. Recommended for use where shock or severe vibration is encountered. Special fabrication for more than four batteries or variations from standard stock parts can be assembled to meet your requirements. Ideal for NiCd, lkaline, NiM, Carbon, Zinc and ithium Cells Corrosion Resistant, Nickel Plate Brass Contacts, Nickel Plate Moisture Proof Resin Impregnated, Fibre Insulating Washers FIG. 1 STINESS STEE BSE. INSUTOR TUBES SUPPIED FOR CES (END TO END) FIG. 2 STEE BSE. ITIUM (SINGE CE) STEE BTTERY ODERS FIG. 3 ONE CONTCT INSUTED CT. NO. 1 CE 2 CE 3 CE 4 CE PENOIC BSE FOR 2, 3, 4 CES (SIDE BY SIDE) SERIES SERIES CE CONTCTS INSUTED CT. NO. 2 CE * * * C CE * * * D CE * * * /2 ITIUM CE ODS NO. OF CES *Clips mounted on.062 (1.57) thick Phenolic board. FIG. NO. IEC R6 R14 R20 CR11108 BTTERY CROSS REFERENCE BTTERY NSI/NED MNUFCTURERS BTTERY.531 (13.4) (48.4) SIZE.565 (14.5) (50.5) ( O.D. ) CE 4 CE Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ( O.D. ) BTTERY.875 (22.2) (47.6) SIZE 1.125(28.6) 1.969(50.0) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ( O.D. ) BTTERY (30.1) (58.7) SIZE (34.9) (61.3) Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran ( O.D. ) BTTERY.475 (12.1).965 (24.5) SIZE.510 (13.0).992 (25.2) Energizer 544, Duracell PX28, 1406C Panasonic CR SERIES NON-INSUTED DIMPE CONTCT INSUTED CONTCT (GROUNDED ONE SIDE) 2100 SERIES (FUY INSUTED) INSUTED CONTCT INSUTED CONTCT MODIFICTIONS We welcome the opportunity to quote on variations of standard items. Use our engineering service for your custom-built holders. olders with PC and Quick-Fit terminalsavailable on special order. 24 RoS COMPINT ~ ISO 9001 CERTIFIED

31 DIMENSION DRWINGS FOR STEE BTTERY ODERS MTERI SPECIFICTIONS: Clips: Spring Steel, Nickel Plate Contact Eyelets: Brass, Nickel Plate Insulating Washers: Resin Impregnated Fibre Solder ugs: Brass, Tin Plate Phenolic Base: Type PBE, Per MI-P-3115C Stainless Steel Base: Ribbed, For dded Support Steel Base: Spring Steel, Nickel Plate DIMPE CONTCT.144 [3.7] (2) PS INSUTED CONTCT INSUTED CONTCTS.144 [3.7] (2) PS W W C C DWG SERIES STINESS STEE BSE (END-TO-END) DWG SERIES STINESS STEE BSE (END-TO-END) INSUTED CONTCTS.144 [3.7].128 [3.3] (2) PS.437 [11.1] DWG. 2 1/2 ITIUM STEE BSE (SINGE CE) C W INSUTED CONTCTS SERIES SERIES W C J ODS ONE CONTCT CONTCTS INSUTED INSUTED NO. OF DWG. Width ength eight eight to Mounting ole Mounting oles CT. NO. CT. NO. CES NO. Of Base Of Base Of older Battery Center Distance CTR To CTR CE (17.4) (54.0).656 (16.7).437 (11.1) _ (34.1) _ 2140* (31.8) (54.0).656 (16.7).437 (11.1).750 (19.1) (34.1) _ 2171* (50.8) (54.0).656 (16.7).437 (11.1).750 (19.1) (34.1) _ 2182* (69.9) (54.0).656 (16.7).437 (11.1).750 (19.1) (34.1) (17.4) (104.0).656 (16.7).437 (11.1) _ (84.1) (17.4) (153.2).656 (16.7).437 (11.1) _ (133.4) (17.4) (203.5).656 (16.7).437 (11.1) _ (183.6) C CE (17.4) (54.0) (25.4).625 (15.9) _ (34.1) _ 2174* (44.5) (52.4) (25.4).625 (15.9) (30.1) (34.1) _ 2187* (74.6) (52.4) (25.4).625 (15.9) (30.1) (34.1) _ 2188* (104.8) (52.4) (25.4).625 (15.9) (30.1) (34.1) (17.4) (104.0) (25.4).625 (15.9) _ (84.1) (17.4) (150.8) (25.4).625 (15.9) _ (131.0) (17.4) (200.8) (25.4).625 (15.9) _ (181.0) D CE (17.4) (65.1) (32.5).796 (20.2) _ (41.3) _ 2176* (54.0) (65.1) (32.5).796 (20.2) (39.7) (41.3) _ 2190* (93.6) (65.1) (32.5).796 (20.2) (39.7) (41.3) _ 2192* (133.4) (65.1) (32.5).796 (20.2) (39.7) (41.3) (17.4) (125.4) (32.5).796 (20.2) _ (101.6) (17.4) (184.9) (32.5).796 (20.2) _ (161.1) (17.4) (244.5) (32.5).796 (20.2) _ (220.6) 1/2 ITIUM CE (15.9) (29.4).595 (15.1).345 (8.8) _.531 (13.5).144 [3.7] (2) PS PENOIC BSE DWG SERIES PENOIC BSE (SIDE-BY-SIDE) C J W STEE BTTERY ODERS *Clips mounted on.062 (1.57) Thick, Phenolic board. DIMENSIONS RE FOR REFERENCE ONY RoS COMPINT ~ ISO 9001 CERTIFIED 25

32 ECONOMIC PSTIC BTTERY ODERS Economical design, available with PC terminals or wire leads Batteries securely held in place to assure a positive connection and maintain a low contact resistance Contact springs self-adjust to variations in battery length Withstands shock and vibration vailable with solder lugs or male/female snap fasteners For easy removal, available with ribbon olders for multiple batteries are prewired in series. SPECIFICTIONS older: Polypropylene Springs: Spring Steel, Nickel Plate PC Pins:.031 (.79) Brass, Nickel Plate Wires (Red & Black): #26 WG, Tinned,.187 (4.8) end strip U/CS1007 MODIFICTIONS We welcome the opportunity to quote on variations of standard items. Use our Engineering services for your custom-built holders. olders for C and D cell are available on request. PSTIC BTTERY ODERS [57.0].098 [2.5] (2) PS [52.0] One (1) Cell Two (2) Cells - In Series Three (3) Cells - In Series Four (4) Cells - In Series.665 [16.9].500 [12.7] CT. NO PC Mount CT. NO. 2460RB PC Mount w/ribbon CT. NO Wire eads (150) [50.0] [44.7] One (1) Cell.512 [13.0].590 [15.0].547 [13.9].500 [12.7] CT. NO PC Mount CT. NO. 2466RB PC Mount w/ribbon CT. NO Wire eads (150) [59.5].120 [3.1] (2) PS CT. NO PC Mount CT. NO. 2462RB PC Mount w/ribbon CT. NO Wire eads (150) Two (2) Cells - In Series [53.0].115 [2.9] (3) PS.650 [16.0].500 [12.7] [32.9] TERMINS TIS SIDE ONY.512 [13.0].968 [24.6] TERMINS TIS SIDE ONY CT. NO PC Mount CT. NO. 2468RB PC Mount w/ribbon CT. NO Wire eads (150) [15.0].500 [12.7].500 [12.7] [58.0].130 [3.3] (2) PS CT. NO PC Mount CT. NO. 2464RB PC Mount w/ribbon CT. NO Wire eads (150) Three (3) Cells - In Series [52.7] (2) PS [48.3] TERMINS TIS SIDE ONY [37.5] TERMINS TIS SIDE ONY.669 [17.0].500 [12.7] [12.7] [13.0].500 [12.7] [12.7] + CT. NO PC Mount CT. NO. 2479RB PC Mount w/ribbon CT. NO Wire eads (150) [58.0].630 [16.0].115 [2.9] (2) PS CT. NO PC Mount CT. NO. 2477RB PC Mount w/ribbon CT. NO Wire eads (150) Four (4) Cells - In Series [53.0].093 [2.36] (2) PS [63.0] TERMINS TIS SIDE ONY [50.3] TERMINS TIS SIDE ONY.512 [13.0].500 [12.7].500 [12.7] CT. NO PC Mount CT. NO. 2481RB PC Mount w/ribbon CT. NO Wire eads (150) [12.7].500 [12.7] 1/2 CR2 N 12V 1/2 Cell -or CR2 Cell N Cell - 1.5V or 12V Cell Two (2) N or Two (2) 12V Cells - In Series [34.5] [29.5].689 [17.5].472 [12.0].602 [15.3] [35.0] [30.0].512 [13.0].590 [15.0].500 [12.7].550 [14.0] [38.1].093 [2.36] (4) PS [27.0] TERMINS TIS SIDE ONY.590 [15.0] [13.5] + CT. NO PC Mount CT. NO. 2485RB PC Mount w/ribbon CT. NO Wire eads (150) CT. NO PC Mount CT. NO. 2470RB PC Mount w/ribbon CT. NO Wire eads (150) CT. NO PC Mount CT. NO. 2472RB PC Mount w/ribbon CT. NO Wire eads (150) 26 RoS COMPINT ~ ISO 9001 CERTIFIED

33 Supports high density packaging on or off board, positions anywhere for easy access to batteries Economical design Batteries securely held in place to assure a positive connection and maintain a low contact resistance Contact springs self-adjust to variations in battery length Snap-on cover protects and secures batteries Withstands shock and vibration DENSI-PK BTTERY ODERS SPECIFICTIONS older: BS Springs: Spring Steel, Nickel Plate Wires (Red & Black): 6.0 (150) long, #26 WG, Tinned,.187 (4.8) end strip U/CS1007 Two (2) Cells - 3V Three (3) Cells - 4.5V.709 [18.0] [35.4] CT. NO [26.0] CT. NO ODER [68.3] ODER.630 [16.0] [63.0] COVER FOR SEF-TPPING SCREW COVER Features separable snap-on/snap-off battery connector (9 Volt type) to assure reliable connections Economical design, holders available for two, three or four cells. Wired in series to accept connector (9 Volt type) Easily disconnect battery holder from your device - no tools required SPECIFICTIONS older: Polypropylene Male/Female Contacts: Brass, Nickel Plate Springs: Spring Steel, Nickel Plate Two (2) Cells - 3V.728 [18.5] [48.0] COVER ODER [68.5] ODER [54.0] COVER FOR SEF-TPPING SCREW PSTIC BTTERY ODERS WIT SNP-ON CONNECTORS.591 [15.0] [37.5] Batteries securely held in place to maintain a positive contact and a low contact resistance Battery contact springs self adjust to variations in battery length Withstands shock and vibration Ideally mates with Keystone 9 Volt battery straps and connectors (Refer to pages 28-29) Three (3) Cells - 4.5V Two Cells - 3V Three (3) Cells - 4.5V Four (4) Cells - 6V CT. NO CT. NO PSTIC BTTERY ODERS [58.0].669 [17.0] [58.0].630 [16.0] [58.0] [28.0].500 [12.7] [31.8].500 [12.7] [48.3].500 [12.7] [30.5].130 [3.3] (3) PS.130 [3.3] (2) PS CT. NO CT. NO CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED 27

34 SIEDED 9 VOT BTTERY STRPS Insulates and shields 9 Volt battery snap-on connector contacts ssures safe secure use, reduces the potential of short circuits and prevents tampering with battery contacts Protects circuits, prevents unwanted electrical discharge due to unintended grounding Modifications available with different wire lengths. SPECIFICTIONS Base: BS Male/Female Contacts: Brass, Nickel Plate Wires (Red & Black): #26 WG, Tinned,.187 (4.8) end strip, U/CS1007 *Tolerance on lead length +/-.250 (6.4) Protects battery contacts from dust, dirt, and physical damage Ideal for rugged applications, made of high impact molded plastic with integral wire lead strain relief.984 [25.0].335 [8.5].312 [7.9].512 [13.0].500 [12.7] RED BK STRIN REIEF.960 [24.4].500 [12.7].500 [12.7] RED BK VOT STRPS I STYE T STYE MODED MODED CT. NO. *ED ENGT CT. NO (101.6) (152.4) (203.2) 81-8 Fully ssembled Rigid ssembly Ideal for rugged applications, made of high impact molded plastic with integral wire lead strain relief Rigidly constructed. Nickel plate, male and female contacts. Female contacts are spring temper. ccepts numerous insertions to meet U.. approved standards. Provides excellent mechanical strength and low contact resistance. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires are rated to +176 F (+80 C) and 300V and meet U/CS #1061/#1007 requirements. Modifications available with different wire lengths. SPECIFICTIONS Contacts: Phosphor Bronze, Nickel Plate Wire: #26 WG, 7/34 End Strip:.250 (6.4) ong, Tinned Base: Polypropylene *Tolerance on lead length +/-.250 (6.4) Base Size: (27.0).512 (13.0) PREMIUM 9 VOT BTTERY STRPS I STYE T STYE MODED MODED CT. NO. *ED ENGT CT. NO (101.6) (152.4) (203.2) 2243 Base Size: 1.00 (25.4).512 (13.0) ECONOMY 9 VOT BTTERY STRPS 232-M 233-M 234-M Fully ssembled Rigid ssembly When product cost is of the utmost importance these economy battery straps will suit your needs. Brass contacts, nickel plated with vinyl or BS covering. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires meet U/CS #1007 requirements. Modifications available with different wire lengths Molded BS Base Size:.984 (25.0).469 (11.9) (Strain Relief) SPECIFICTIONS Contacts: Brass, Nickel Plate Wire: #26 WG, 7/34 End Strip:.250 (6.4) ong, Tinned *Tolerance on lead length +/-.250 (6.4) Molded BS Base Size:.965 (25.0).469 (11.9) (Strain Relief) 235-M 236-M 237-M Vinyl Base Size: (31.8).530 (13.5) I STYE T STYE MODED VINY MODED VINY CT. NO. CT. NO. *ED ENGT CT. NO. CT. NO. 232-M (101.6) 235-M M (152.4) 236-M M (203.2) 237-M 237 Vinyl Base Size: (24.5).528 (13.4) RoS COMPINT ~ ISO 9001 CERTIFIED

35 FIBRE BSE PREMIUM 9 VOT BTTERY STRPS FIBRE BSE Fully Insulated Flexible assembly CT. NO. *ED ENGT Base Size: (26.0).535 (13.6) 68 NONE.062 (1.57) thick Contacts: Steel, Nickel Plate (101.6) Wire: #22 WG, 7/30 Prebond (177.8) End Strip:.375 (9.5) ong, Tinned (203.2) *Tolerance on lead length +/-.250 (6.4) VERTIC 9 VOT PC SNP-ON CONTCT Space saving, economical Excellent mechanical strength ow contact resistance Durable fibre base Wave solderable nti-wicking Design SPECIFICTIONS Base:.062 (1.57) thick Fibre Contacts: Steel, Nickel Plate Pins: Brass, Tin Plate CT. NO. ENGT 967 (with PC Pins).120 (3.0) 968 (with PC Pins).400 (10.2) [26.0].080 [2.05].535 [13.6].500 [12.7] This dual battery strap is pre-wired for connecting two 9 Volt batteries. Base made from fibre material with steel, nickel plated contacts. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires meet U/CS #1061 requirements. SPECIFICTIONS Contacts: Steel, Nickel Plate Wire: #22 WG, 7/30 Prebond End Strip:.375 (9.5) ong, Tinned CT. *ED NO. ENGT (177.8) *Tolerance on lead length +/-.250 (6.4) Protects 9 Volt batteries and battery packs when they are not in use Snap-fits onto battery contacts Both male and female contacts are covered, minimizing physical damage which can occur during battery handling, shipping and storage Shields the battery contacts and reduces the potential of a short circuit between battery poles Protects sensitive electronic equipment, systems and circuits, cap prevents unwanted electrical discharges Protects the battery contacts from damage due to dust, dirt and contamination I - STYE Cover Size: CT. *ED Cover Size:.900 (22.9).575 (14.6) NO. ENGT.900 (22.9).575 (14.6) Contacts: Steel., Nickel Plate (101.6) Contacts: Steel., Nickel Plate Wire: #22 WG, 7/30 Prebond Wire: #22 WG, 7/30 Prebond End Strip:.375 (9.5) ong, Tinned (165.1) End Strip:.375 (9.5) ong, Tinned (203.2) *Tolerance on lead length +/-.250 (6.4) *Tolerance on lead length +/-.250 (6.4).120 [3.1] Cost saving design Ideal for custom applications ttach your own terminals and wire leads SPECIFICTIONS Base:.062 (1.57) thick Fibre Contacts: Steel, Nickel Plate DU 9 VOT BTTERY STRP.900 [22.9].500 [12.7] [28.0] BCK RED.500 [12.7].086 [2.20] (2) PS PRE.212 [5.4].062 [1.55].700 [17.8] PROTECTIVE BTTERY CP.960 [24.4].500 [12.7] [26.0] T - STYE CT. NO. *ED ENGT (101.6) (165.1) (203.2) 9 VOT SNP-ON CONTCT.079 [2.00] (2) PS.535 [13.6].500 [12.7] CT. NO. 68 (without PC Pins) 9 VOT BTTERY STRPS & CONTCTS MTERI: Impact Resistant Polypropylene, Black.375 [9.5] CT. NO. 96 RoS COMPINT ~ ISO 9001 CERTIFIED 29

36 Ideal Slide-In contact for easy installation and removal of 9 Volt batteries Space saving design installs directly onto the PC board Suitable for.062 (1.57) to.093 (2.36) thick PC boards ORIZONT 9 VOT PC EF-SPRING CONTCT Reliable leaf-spring assures low contact resistance Ideal for self-contained battery compartments Snap-in mounting legs holds contact secure during wave soldering MTERI:.012 (.30) Spring Steel, Tin-Nickel Plate.360 [9.1].160 [4.1].325 [8.2].450 [11.4] for Two Contacts.120 [3.0].150 [3.8].500 [12.7].120 [3.0] 9 VOT BTTERY CONTCTS CT. NO [8.9].120 [3.0] To Mount Battery On PC Board Use Cat. No. 593 and Cat. No [9.7] 30 ORIZONT 9 VOT PC SNP-ON CONTCTS Space saving design installs directly onto the PC board Suitable for.062 (1.57) to.093 (2.36) thick PC boards Ideal for self-contained battery compartments.550 [14.0].062 [1.55] (3) PS.045 [1.15].416 [10.6].156 [4.0].156 [4.0] for Two Contacts.500 [12.7].365 [9.3].047 [1.20].250 [6.3] MTERI: Frame:.015 (.38) Steel, Tin Plate; Contacts: Steel, Nickel Plate.118 [3.0].070 [1.80] TYP..350 [8.9].120 [3.0].380 [9.7].550 [14.0].062 [1.55] (3) PS.190 [4.8].100 [2.5] (3) PS.365 [9.3].410 [10.4] RoS COMPINT ~ ISO 9001 CERTIFIED.380 [9.7].180 [4.6].225 [5.7].052 [1.30] TYP. To Mount Battery Off PC Board Use Cat. No. 635 and Cat. No [6.7].265 [6.7] for Two Contacts.500 [12.7].380 [9.7].180 [4.6].110 [2.8] TYP..030 [.75] TYP..415 [10.5] CT. NO. 593 (Male) CT. NO. 594 (Female) CT. NO. 635 (Male) CT. NO. 636 (Female) BTTERY SNP-ONS For most electronic applications requiring a quick connect and disconnect of circuit. Commonly used with 9 Volt or other batteries designed with snap fasteners. Ideal for temporary or permanent means of connecting without soldering. Can be cascaded together for multiple connections. SOCKET OR STUD ONY SOCKET OR STUD W/CRIMP UG FIG. 1 FIG. 2 FIG. 3 FIG. 4 DI DI DI B Stud only Off-Board Socket only CT. FIG NO. NO. DI B OE SIZE MTERI 261* (5.7).135 (3.4).312 (7.9).097 (2.5) 269* (5.3).150 (3.8).250 (6.4).096 (2.4) Junior* Steel, Nickel Plate (7.2).143 (3.6).423 (10.7).125 (3.2) (6.6).145 (3.7).312 (7.9).125 (3.2) Senior Brass, Nickel Plate B Mounts Directly to Printed Circuit Board.410 [10.4].190 [4.8].100 [2.5] (3) PS Stud w/crimp ug Socket w/crimp ug CT. FIG NO. NO. DI SIZE MTERI 263* (5.7).170 (4.3).790 (20.1) 271* (5.2).200 (5.1).790 (20.1) Junior Stud: Steel, Nickel Plate ug: Brass, Tin Plate (7.2).185 (4.7).840 (21.3) (6.7).185 (4.7).835 (21.2) Senior Stud: Brass, Nickel Plate ug: Brass, Tin Plate *Use Jr. Socket and stud for standard 9 Volt Battery DIMENSIONS RE FOR REFERENCE ONY *Use Jr. Socket and stud for standard 9 Volt Battery Off-Board DI

37 MODED 9 VOT BTTERY ODERS [12.7] SPECIFICTIONS Body: Molded from high impact, Glass Filled Nylon Terminals: Brass, Tin Plate Contacts: Steel, Nickel Plate.600 [15.2] [53.9].875 [22.2].130 [3.3] (4) PS [29.6] [23.8] olds any size, any shape, standard 9 Volt battery. Eliminates need to specify an exact battery brand, size or shape. Ideal for power source or memory back-up use in PC, telecommunications, data processing, security systems, clocks, radios, toys and appliances. Male-female snap-in terminals assure positive contact and proper polarity Durable, rugged construction Excellent spring retention holds battery in place Withstands severe shock and vibration Operating temperature range: -40 F to +266 F (-40 C to +130 C) Impervious to most industrial solvents.187 [4.8] TB.205 [5.2] TB.938 [23.8].800 [20.3].750 [19.1].450 [11.4].130 [3.3] (4) PS..875 [22.2].080 [2.0] (2) PS..600 [15.2] CT. NO CT. NO PC Terminals Quick-Fit Terminals UMINUM 9 VOT BTTERY ODERS For use with standard 9 Volt battery. Battery snaps in place to insure positive contact. Ideal where severe shock and vibration are encountered. vailable with standard solder lugs or printed circuit lugs. SPECIFICTIONS Frame: luminum Solder Terminals: Brass, Tin Plate PC Terminals: Brass, Tin Plate Contacts & Clips: Steel, Nickel Plate Insulation: Resin Impregnated Polarizing Washer: Polyethylene 203-P 303-P.500 [12.7] Slide-in battery for quick installation and replacement Polarity clearly marked 9 VOT ODERS.218 [5.5] [48.3].312 [7.9] [50.8] [34.9].875 [22.2].500 [12.7] [28.6].130 [3.3] (4) PS..875 [22.2] [41.3].875 [22.3].500 [12.7] [28.6] [28.6].128 [3.25] (4) PS.500 [12.7] [28.6].750 [19.1].500 [12.7] [2.0] (2) PS..500 [12.7] CT. NO. CT. NO. BTTERY REFERENCE DESCRIPTION (18.2) (34.9) lkaline ow Profile (20.6) (34.9) lkaline Snap Fit (21.8) (31.8) ithium-ion Snap Fit RoS COMPINT ~ ISO 9001 CERTIFIED.128 [3.3] (4) PS [28.6].500 [12.7].562 [14.3].500 [12.7].750 [19.1] PORIZING WSER (+) BTTERY SIDE [28.6] CT. NO. 203-P CT. NO. 303-P Solder Terminals PC Terminals.562 [14.3] 31

38 REFER TO PGE 8 & 10 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. PESE VERIFY YOUR BTTERY YOUT PRIOR TO FBRICTION. BTTERY CONTCTS YOUT & MOUNTING DETIS DIMENSION CT. For For 27 NO (8.4) 1.67 (42.4) (7.6) 10 (28.0) (22.6) 0.32 (8.1) DIMENSION CT. For For N For 23 NO (10.4) 1.75 (44.5) 0.45 (11.4) 1.14 (29.0) 0.40 (10.2) 1.10 (27.9) (45.7) 1.20 (30.5) 1.15 (29.2) DIMENSION CT. For For 2/3 For CR2 For 1/2 NO (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6) (52.1) 1.38 (35.1) 1.04 (26.4) 1.04 (26.4) 553 DIMENSION CT. For For N For 23 NO (10.4) 1.75 (44.5) 0.45 (11.4) 1.14 (29.0) 0.4 (10.2) 1.10 (27.9) (43.2) 1.1 (27.9) 1.05 (26.7) 556 DIMENSION CT. For For 2/3 For CR2 For 1/2 NO (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6) (48.3) 1.23 (31.2) 0.97 (24.6) 0.89 (22.6) DIMENSION CT. For For 2/3 For CR2 For 1/2 NO (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6) (60.5) 1.71 (43.4) 1.53 (24.6) 1.37 (34.8) 5331 DIMENSION CT. For For N For 23 For NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4) (49.8) 1.35 (34.3) 1.31 (33.3) 1.86 (47.2) 5330 CT. BTTERY DIM. NO. CE REFERENCE DIMENSION 206 For 0.56 (14.2) 1.98 (50.3) 1.10 (27.90) 207 For C 1.00 (25.4) 1.97 (50.0) 0.81 (20.60) 208 For D 1.30 (33.0) 2.42 (61.5) 1.25 (31.80).156 [4.0] MIN..092 [2.3] MIN..156 [4.0] MIN..092 [2.3] MIN..156 [4.0] MIN..092 [2.3] MIN. MIN..360 [9.1] MIN..890 [22.6].360 [9.1] MIN..124 [3.1] MIN..671 [17.0] MIN..662 [16.8] MIN..613 [15.6] MIN..300 [7.6] MIN. Pad ayout '' DIM. MIN. Pad ayout '' DIM. MIN. Pad ayout '' DIM. MIN. Pad ayout.375 [9.5] '' DIM. Pad ayout '' DIM..300 [7.6] MIN..128 [3.25].156 [4.0] MIN..156 [4.0] MIN..156 [4.0] MIN. dimensions reflect initial insertion deflection..375 [9.5] 32 RoS COMPINT ~ ISO 9001 CERTIFIED

39 REFER TO PGE 9 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. VERIFY YOUR BTTERY YOUT PRIOR TO FBRICTION..236 [6.0].300 [7.6].365 [9.3].118 [3.0].395 [10.0].156 [4.0].350 [8.9].120 [3.0] '' DIM..055 [1.4] OE '' DIM..068 [1.7] OE.300 [7.6] '' DIM..072 [1.8] OE '' DIM..070 [1.8] OE '' DIM..110 [2.8] OE. '' DIM..052 [1.3] OE.236 [6.0].300 [7.6].300 [7.6] dimensions reflect initial insertion deflection. DIMENSION CT. For For 27 NO (8.4) 1.67 (42.4) (7.6) 1.10 ( (27.2) 0.50 (12.7) DIMENSION CT. For For N For 23 NO (10.4) 1.75 (44.5) 0.45 (11.4) 1.14 (29.0) 0.40 (10.2) 1.10 (27.9) (27.4) 0.47 (11.9) 0.43 (10.9) DIMENSION CT. For For 2/3 For CR2 For 1/2 NO (14.2) 1.98 (50.3) 0.67 (17.0) 1.36 (34.5) 0.60 (15.2) 1.05 (26.7) 0.56 (14.2) 0.97 (24.6) (33.5) 0.67 (17.0) 0.39 (9.9) 0.31 (7.9) (33.5) N/ 0.31 (7.9) (33.5) N/ 0.31 (7.9) DIMENSION CT. For For 2/3 NO (18.4) 2.56 (65.0) 0.67 (17.0) 1.36 (34.5) (47.0) 0.57 (14.5) DIMENSION CT. For 2/3 For CR2 NO. 0.67(17.0) 1.36 (34.5) 0.60 (15.2) 1.05(26.7) 595 with (37.1) 1.18 (30.0) DIMENSION CT. For For For 1/2 For N For 23 NO (14.2) 1.98(50.3) 0.41(10.4) 1.75(44.5) 0.56(14.2) 0.97(24.6) 0.45(11.4) 1.14(29.0) 0.40 (10.2) 1.10(27.9) 637 with (53.9) 1.88 (47.8) 1.10 (27.9) 1.27 (32.3) 1.23 (31.2) DIMENSION CT. For For 2/3 For CR2 For 1/2 NO. 0.56(14.2) 1.98(50.3) 0.67(17.0) 1.36(34.5) 0.60 (15.2) 1.05(26.7) 0.56(14.2) 0.97(24.6) 596 with (52.6) N/ 1.14 (29.0) 1.06 (26.9) 590 with (54.6) 1.50 (38.1) 1.22 (31.0) 1.14 (29.0) DIMENSION CT. For For N For 23 NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 597 with (46.5) 1.22 (31.0) 1.18 (30.0) 591 with (48.5) 1.30 (33.0) 1.26 (32.0) RoS COMPINT ~ ISO 9001 CERTIFIED BTTERY CONTCTS YOUT & MOUNTING DETIS 33

40 REFER TO PGES 12 & 13 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. PESE VERIFY YOUR BTTERY YOUT PRIOR TO FBRICTION. BTTERY CONTCTS YOUT & MOUNTING DETIS , DIMENSION CT. NO. FIG. For For N For 12 V For NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4) 204 with (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5) 204,238 with 295, (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5) 202 with (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5) 204 with (50.0) 1.36 (34.5) 1.32 (33.5) 1.89 (48.0) 204 with (50.0) 1.36 (34.5) 1.32 (33.5) 1.89 (48.0) , , DIMENSION FIG. For For 1/2 For CR2 For 2/3 CT. NO. NO (14.2) 1.98 (50.3) 0.56 (14.2) 0.97 (24.6) 0.60 (15.2) 1.05 (26.7) 0.67 (17.0) 1.36 (34.5) 209 with (54.1) 1.12 (28.4) 12.0 (30.5) 1.46 (37.1) 209, 228 with 290, (54.1) 1.12 (28.4) N/ N/ 288, 210 with (54.1) 1.12 (28.4) N/ N/ 209 with (57.7) 1.26 (32.0) 1.34 (34.0) 1.60 (40.6) 209 with 288, (57.7) 1.26 (32.0) N/ N/ DIMENSION CT. For For 1/2 For CR2 For 2/3 NO (14.2) 1.98 (50.3) 0.56 (14.2) 0.97 (24.6) 0.60 (15.2) 1.05 (26.7) 0.67 (17.0) 1.36 (34.5) (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4) (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4) (55.6) 1.18 (29.9) 1.26 (32.0) 1.52 (38.6) (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4) DIMENSION CT. For For N For 12 V For NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4) (49.8) 1.35 (34.3) 1.31 (33.3) 1.88 (47.8) (50.5) 1.38 (35.0) 1.34 (34.0) 1.91 (48.5) DIMENSION CT. For For 1/2 For CR2 For 2/3 NO (14.2) 1.98 (50.3) 0.56 (14.2) 0.97 (24.6) 0.60 (15.2) 1.05 (26.7) 0.67 (17.0) 1.36 (34.5) (57.9) 1.27 (32.3) 1.35 (34.3) 1.61 (40.8) 5205 with (57.9) 1.27 (32.3) N/ N/ (59.4) 1.33 (33.8) (35.87) 1.67 (42.4) 5209 with (59.4) 1.33 (33.8) N/ N/ DIMENSION CT. For For N For 12 V For NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4) (43.9) 1.12 (29.0) 1.08 (27.9) 1.65 (42.4).055 [1.39] (2) PS.175 [4.4] '' DIM. (INSIDE).060 [1.5].070 [1.8] Fig. 1 Spring-Button dimensions reflect initial insertion deflection. '' DIM. (INSIDE).060 [1.5].070 [1.8] Fig. 2 Spring-Spring dimensions reflect initial insertion deflection. '' DIM. (OUTSIDE) dimensions reflect initial insertion deflection. '' DIM. (OUTSIDE) dimensions reflect initial insertion deflection. '' DIM. EDGE OF BORD 34 RoS COMPINT ~ ISO 9001 CERTIFIED

41 REFER TO PGE 14 TRU 16 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. VERIFY YOUR BTTERY YOUT PRIOR TO FBRICTION. '' DIM. Fig. 1 '' DIM. Fig. 2 '' DIM. Fig. 1 '' DIM. Fig. 2 '' DIM. Fig. 1 '' DIM. Fig DIMENSION CT. NO. FIG. For For N For 12V For NO. 0.41(10.4) 1.75(44.5) 0.45(11.4) 1.14(29.0) 0.40(10.2) 1.10(27.9) 0.33(8.4) 1.67(42.4) 5203 with (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5) 5204 with (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5) 5214, 5213 with 5203, (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5) 5201, , 5223 DIMENSION CT. NO. FIG. For For 1/2 For 2/3 NO. 0.56(14.2) 1.98(50.3) 0.56(14.2) 0.97(24.6) 0.67(17.0) 1.36(34.5) 5202 with (56.6) 1.22 (31.0) 1.61 (40.9) 5222 with (56.9) 1.23 (31.2) 1.62 (41.1) 5201 with (56.9) 1.23 (31.2) 1.62 (41.1) 5220 with (56.9) 1.23 (31.2) 1.62 (41.1) 5201, 5223 with 5210, (56.9) 1.23 (31.2) N/ 5222, 5221 with (56.9) 1.23 (31.2) N/ 5220, 5219 with 5217, (56.9) 1.23 (31.2) N/ 5227 with (56.9) 1.23 (31.2) N/ , , , DIMENSION CT. NO. FIG. For C For D NO. 0.99(25.0) 1.97(50.0) 1.30(33.0) 2.24(56.9) 5240 with (57.2) N/ 5250 with N/ 2.75 (69.9) 5240, 5241 with (57.2) N/ 5250, 5251 with 5252, N/ 2.75 (69.9) , , 5253 BTTERY CONTCTS YOUT & MOUNTING DETIS Tel (718) Fa (718) RoS COMPINT ~ ISO 9001 CERTIFIED 35

42 FUSE CIPS & ODERS Our comprehensive line of fuse clips, contacts and holders are ideally suited for use in today s industrial, electronic and automotive devices. pplications include: Delicate microcircuitry Consumer Electronics Telecom and Datacom devices Mini, Standard & Maxi blade utomotive Fuses igh Shock and Vibration applications igh mperage applications U approved devices Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.

43 27 FUSE CIPS & ODERS UTOMOTIVE FUSE CIPS ow Profile Maxi...38 Mini Standard...39, 41 UTOMOTIVE FUSE ODERS ow Profile Maxi...38 Mini Standard , 41 Cylindrical Fuse Covers...43 SECTION CONTENTS CYINDRIC FUSE CIPS 5mm G thru 8G G, Midget, SPF...44 CYINDRIC FUSE ODERS 5mm G Midget, SPF, 5G Fuse older...43 SUBMINITURE FUSE ODERS Cylindrical, Rectangle...43 MOUNTING DETIS

44 vailable for standard, mini and maxi fuse sizes orizontal and vertical mini blade clips and holders for ittelfuse ow Profile Mini 897 series, Mini 297 or 997 series, Bussmann TM series fuses or equivalents UTOMOTIVE BDE FUSE CIP & ODERS orizontal and vertical standard blade clips and holders for ittelfuse TO 257 series and Bussmann TC series fuses or equivalents Vertical maxi blade clips and holders for ittelfuse Maxi 297 series and Bussmann MX series fuses or equivalent. Thru hole PC mountable, maintains position during wave soldering olds fuse securely, even after multiple insertions vailable with orientation legs to assure proper orientation UTO FUSE CIPS & ODERS 38 CT. NO (PC Mount) CT. NO (In ine).422 [10.7].578 [14.7].180 [4.6].106 [2.7] MXI UTOMOTIVE FUSE CIP & ODER MODUR UTOMOTIVE BDE FUSE ODERS 3559 (14 gauge wire lead must be cut and spliced for in-line use).375 [9.5].109 [2.8].180 [4.6] FOR.205 (5.2).025 (.64) STNDRD BDE FUSES For ittelfuse TO 257 series/bussmann TC series or equivalent SPECIFICTIONS Contacts: Brass, Tin Plate Body: Nylon Current Rating: V C Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC).417 [10.6].394 [10.0].328 [8.4].500 [12.7].152 [3.9] (4) PS CT. NO CT. NO CT. NO For ittelfuse Maxi 297 series/bussmann Max series or equivalent Thru hole PC mountable, maintains position during wave soldering Withstands the rigors of shock and vibration older design prevents solder wicking olds fuse securely, even after multiple insertions SPECIFICTIONS Contacts:.020 (.51) Copper, Tin-Nickel Plate Insulator: Glass filled Nylon, U Rated 94V-0 Current Rating: V C.392 [10.0] Temperature Rating: -58ºF to+292ºf [35.8] (-50ºC to+145ºc) 3560 (Shown with two 3560 holders, interlocked).157 [4.0] (2) PS.375 [9.6] [33.0] FOR.312 (7.9).032 (.80) MXI BDE FUSES COVER SOWN OPEN..382 [9.7].360 [9.2].328 [8.4].180 [4.6].067 [1.70] For Two Clips.969 [24.6].890 [22.6] [27.1].059 [1.50] x.075 [1.90] (2) PS SPECIFICTIONS Contacts: Brass, Tin Plate Body: Nylon Current Rating: V C Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC).157 [4.0].519 [13.2].394 [10.0].984 [25.0].362 [9.2].110 [2.8].032 [0.81] (2) PS RoS COMPINT ~ ISO 9001 CERTIFIED.375 [9.5].162 [4.1] (4) PS.140 [3.6].230 [5.9].442 [11.3].136 [3.5] Designed for standard auto blade fuses Fully insulated compact design Mounts easily in pre-drilled or punched hole older has pocket to hold spare fuse Safety lever release clip will not open under shock or vibration Fuses are installed and removed easily May be used individually or easily interlocked for multiple mounting.519 [13.2].062 [1.57] (2) PS.282 [7.2].360 [9.2].089 [2.26] (2) PS.375 [9.5].162 [4.1] (7) PS.390 [9.9].156 [4.0].032 [0.81] (4) PS For Two olders.360 [9.2].650 [16.5].089 [2.26] (4) PS Fully insulated fuse mount Designed for standard auto blade fuses Mounts easily in punched hole Fuses are installed and removed easily May be used individually or easily interlocked for multiple mounting For Two olders.519 [13.2].062 [1.57] (2) PS.359 [9.1].140 [3.6].359 [9.1]

45 STNDRD UTOMOTIVE BDE FUSE CIPS & ODERS FOR.205 (5.2).025 (.64) STNDRD BDE FUSES olds fuse securely, even after multiple insertions Thru hole-mount, maintains position during wave soldering For ittelfuse TO 257 series/bussmann TC series or equivalent Withstands the rigors of shock and vibration older design prevents solder wicking VERTIC FUSE ENTRY.760 [19.3] SPECIFICTIONS [28.6] Contacts:.016 (.41) Brass, Tin-Nickel Plate.175 [4.5] Insulator: Glass filled Nylon, U Rated 94V Current Rating: V C [4.5] [3.2] Temperature Rating: -58ºF to +292ºF [3.2] (-50ºC to +145ºC).300 [7.6].300 [7.6].050 [1.27].137 [3.5].050 [1.27].100 [2.6].260 [6.6] For Two Clips For Two Clips.200 [5.1].160 [4.1].200 [5.1].160 [4.1] (2) PS. (3) PS. CT. NO CT. NO Tin-Nickel Plate CT. NO [11.1].281 [7.2].076 [1.92].100 [2.6] (4) PS For ittelfuse TO 257 series/bussmann TC series, ittelfuse ow Profile Mini 897 series or equivalents ow insertion force Fuse holder fully insulates clips to protect fuse from shorting older assures proper spacing and reduces assembly time Thru hole PC mountable, maintains position during wave soldering.780 [19.8].271 [6.9].530 [13.5].062 [1.57] (2) PS VERTIC ENTRY.250 [6.4].070 [1.78].265 [6.8].290 [7.4].110 [2.8].134 [3.4].125 [3.2] Designed for low height clearance applications Fuse will be inserted parallel to board Thru hole mount, maintains position during wave soldering.100 [2.6] (4) PS SPECIFICTIONS Contacts:.016 (.41) Brass Current Rating: VC 2 IN 1 FUSE ODER UNIVERS CIP SPECIFICTIONS Contacts:.016 (.41) Brass, Tin-Nickel Plate Insulator:Nylon 4/6, U Rated 94V-0 Current Rating: V C Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC).530 [13.5].063 [1.6] (4) PS For Two Clips.200 [5.1].100 [2.6] (4) PS.134 [3.4].160 [4.1].200 [5.1] ORIZONT FUSE ENTRY For ittelfuse TO 257 series/bussmann TC series, ittelfuse Mini 297 or 997 series/bussmann TM series, ittelfuse ow Profile Mini 897 series or equivalents ccepts most uto-blade Fuses ow insertion force Thru hole PC mountable, maintains position during wave soldering W.063 [1.60] (4) PS Fuse W Mini.383 (9.7) Standard.530 (13.5) OW INSERTION FORCE.054 [1.4].134 [3.4].292 [7.4].200 [5.1].330 [8.4].150 [3.8].150 [3.8].400 [10.2].150 [3.8].134 [3.4] Fuse holder fully insulates clips to protect fuse from shorting older assures proper spacing and reduces assembly time Polarized legs assure proper orientation of clips onto board.102 [2.6].156 [4.0] CT. NO CT. NO Matte Tin Plate.185 [4.7].062 [1.57].027 [0.69].130 [3.3] CT. NO Top Entry CT. NO Bottom Entry UTO FUSE CIPS & ODERS SPECIFICTIONS Contacts:.012 (.30) Brass, Nickel Plate Insulator: Nylon, U Rated 94V-0 Current Rating: V C Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC).363 [9.2].393 [10.0].820 [20.8].062 [1.55].250 [6.35].240 [6.10] CT. NO [2.6] (2) PS.245 [6.2].145 [3.7].400 [10.2].062 [1.6] (2) PS For Two Clips.400 [10.2].363 [9.2].104 [2.64] (2) PS.212 [5.40].062 [1.55].400 [10.15].098 [2.50].180 [4.55].100 [2.55] CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED 39

46 MINI UTOMOTIVE FUSE CIPS & ODERS For.110 (2.8).032 (.80) MINI BDE FUSES For ittelfuse Mini 297 or 997 series/bussmann TM series or equivalent VERTIC FUSE ENTRY Thru ole Mount MTERI:.016 (.41) Brass, Matte Tin Plate Current Rating: V C VIBE ON TPE ND REE Surface Mount UTO FUSE CIPS & ODERS ow Profile CT. NO [6.0].197 [5.0].091 [2.30] CT. NO Tin-Nickel Plate.156 [4.0].440 [11.2].144 [3.7].244 [6.2].079 [2.00].196 [5.0].075 [1.90] OW PROFIE MINI FUSE ODER For ittelfuse ow Profile Mini 897 series or equivalent.780 [19.8].530 [13.5].062 [1.57] (2) PS.290 [7.4].110 [2.8].134 [3.4].270 [6.9].062 [1.55].086 [2.20] For Two Clips.320 [8.2].094 [2.4] (4) PS.120 [3.1] (2) PS For Two Clips.176 [4.5].144 [3.7].091 [2.30] MIN. TYP..065 [1.65] (4) PS Pad ayout For Two Clips.120 [3.1].144 [3.7].320 [8.2].400 [10.2] MIN. SPECIFICTIONS Material:.012 (.30) Brass Insulator: Glass filled Nylon, U Rated 94V-0 Current Rating: V C Temperature Rating: -58 F to+292 F (-50 C to+145 C) ow insertion force Thru hole PC mountable, maintains position during wave soldering Fuse holder fully insulates clips to protect fuse from shorting older assures proper spacing and reduces assembly time SPECIFICTIONS Contacts:.016 (.41) Brass, Tin-Nickel Plate Insulator: Nylon 4/6, U Rated 94V-0 Current Rating: V C Temperature Rating: -58 F to+292 F (-50 C to+145 C).236 [6.0].187 [4.8].578 [14.7].079 [2.00].400 [10.2].138 [3.5].340 [8.7].100 [2.6] MINI FUSE ODER For ittelfuse Mini 297 or 997 series/bussmann TM or equivalents.265 [6.8].265 [6.73].091 [2.30] (2) PS ow Profile.390 [9.9].530 [13.5].134 [3.4] Refer to page [3.40] CT. NO [1.60] (4) PS for Cat. No [1.60] Clip details (4) PS CT. NO ORIZONT FUSE ENTRY For ittelfuse Mini 297 or 997 series/bussmann TM series or equivalent SPECIFICTIONS Contacts:.012 (.30) Brass Insulator: Nylon 6/6, U Rated 94V-0 Current Rating: V C Temperature Rating: -58 F to+292 F (-50 C to+145 C).630 [16.00].290 [7.37].110 [2.79].390 [9.9].134 [3.41].062 [1.57] TYP CT. NO (Bulk) CT. NO. 3563TR (Tape & Reel) Tape & Reel Spec s: 24mm wide; 12mm pitch; 13 inch reel (1500 pieces per reel) CT. NO Tin Plate.212 [5.4].062 [1.55].040 [1.00].400 [10.2] CT. NO Nickel Plate.280 [7.1].156 [4.0].075 [1.90].100 [2.6].070 [1.80] For Two Clips.400 [10.2].295 [7.5].046 [1.17] (2) PS.076 [1.93] (2) PS.295 [7.5].228 [5.8].145 [3.7].070 [1.8] (2) PS.394 [10.0].406 [10.3].700 [17.8].040 [1.0] (2) PS CT. NO Tin Plate 40 RoS COMPINT ~ ISO 9001 CERTIFIED

47 SMT UTO BDE FUSE ODERS Compatible with most vacuum and mechanical pick and place assembly systems. Fully insulated clips to protect fuses against shorting. One piece assembly reduces assembly time Withstands shock and vibration. 2 in 1 FUSE ODER MINI FUSE ODER For Standard: ittelfuse: TO series/ Bussmann TC series. For ow Profile: ittelfuse: 891 series/ Bussmann TM-P series For Mini: ittelfuse: MIN series/ Bussmann TM series or equivalent.062 [1.6] TYP..345 [8.8].062 [1.6] TYP..345 [8.8] Compatible with most vacuum and mechanical pick and place assembly systems. ccepts standard and mini blade automotive blade fuses..282 [7.2] VERTIC ENTRY.150 [3.8].242 [6.14].062 [1.6].062 [1.6].530 [13.5].780 [19.8].185 [4.7].290 [7.4] SPECIFICTIONS Contacts:.016 (.41) Brass, Matte Tin Plate Insulator: igh Temperature Nylon 46, U 94V-0 Temperature Rating: -58 F to+292 F (-50 C to+145 C) Current Rating: V C.100 [2.5].265 [6.7].530 CT. NO (Bulk) [13.5] CT. NO. 3587TR (Tape & Reel) Tape & Reel Spec s: 32mm wide, 16mm pitch, 13 inch reel (500 pieces per reel) For Mini: ittelfuse: MIN series/bussmann TM series. For Standard: ittelfuse: TO series/bussmann TC series. For ow Profile: ittelfuse: 891 series/bussmann TM-P series.325 [8.3].111 [2.8].390 [9.9].111 [2.8].062 [1.6].350 [8.8] SMT UTO BDE FUSE CIPS Clip with Matte-Tin plate is ideal for low temperature soldering applications, for other temperature sensitive components. VERTIC ENTRY For Mini: ittelfuse: MIN series/bussmann TM series or equivalent.236 [6.0].062 [1.6].350 [8.8].079 [2.00].400 [10.2].091 [2.30] (2) PS.390 [9.9].630 [16.0].290 [7.4].325 [8.3] SPECIFICTIONS Contacts:.016 (.41) Brass, Matte Tin Plate Insulator: igh Temperature Nylon 46, U 94V-0 Temperature Rating: -58 F to+292 F (-50 C to+145 C) Current Rating: V C CT. NO (Bulk) CT. NO. 3588TR (Tape & Reel) Tape & Reel Spec s: 32mm wide, 16mm pitch, 13 inch reel (500 pieces per reel) Clips with Tin-Nickel plate are ideal for lead free, high temperature soldering applications. ORIZONT ENTRY For Mini: ittelfuse: MIN series/bussmann TM series or equivalent.312 [7.9].075 [1.9].100 [2.5].156 [4.0].090 [2.3].105 [2.7] TYP. SMT UTO FUSE CIPS & ODERS Pad ayout For Two Clips SPECIFICTIONS Material:.016 (.41) Brass, Tin-Nickel Plate Current Rating: V C CT. NO (Bulk) =.562 [14.3] FOR MINI FUSE =.750 [19.0] FOR STNDRD.067 [1.7] CT. NO. 3586TR (Tape & Reel) Tape & Reel Spec s:16mm wide, 12mm pitch, 13 inch reel (750 pieces per reel).252 [6.4].105 [2.7].176 [4.5].067 [1.7] SPECIFICTIONS Material:.016 (.41) Brass, Matte Tin Plate Current Rating: V C CT. NO (Bulk).092 [2.3] TYP. Pad ayout For Two Clips.120 [3.0] (2) PS. CT. NO. 3563TR (Tape & Reel) Tape & Reel Spec s:24mm wide, 12mm pitch, 13 inch reel (1500 pieces per reel).320 [8.1] RoS COMPINT ~ ISO 9001 CERTIFIED.400 [10.2].125 [3.2] SPECIFICTIONS Material:.012 (.30) Brass, Tin-Nickel Plate Current Rating: V C CT. NO (Bulk).100 [2.5] CT. NO. 3569TR (Tape & Reel) Tape & Reel Spec s: 24mm wide, 8mm pitch, 13 inch reel (2000 pieces per reel) For Two Clips.110 [2.8].320 [8.1].312 [7.9] 41

48 5mm x 20mm FUSE ODERS SIM INE OW PROFIE.354 [9.0].953 [24.2].382 [9.7].951 [24.2].375 [9.6].156 [4.0].472 [12.0].130 [3.3].467 [11.9].425 [10.8].167 [4.3].047 [1.20].886 [22.5].051 [1.30].860 [21.9] Optional cover with window protects and insulates fuse Flame Retardant.886 [22.5].052 [1.30] (2) PS ow profile, space saving design Optional cover protects and insulates fuse Flame Retardant.860 [21.9].052 [1.30] (2) PS CT. NO older CT. NO. 4628C - Cover only (with window) SPECIFICTIONS Base & Cover: Nylon, U Rated 94V-0 Clips: Brass, Tin Plate Rated: 5 250V C CT. NO older CT. NO. 4527C - Cover only SPECIFICTIONS Base & Cover: Nylon, U Rated 94V-0 Clips: Brass, Tin Plate Rated: 5 250V C 5mm & 3G FUSE ODERS CT. NO [7.9] SPECIFICTIONS Base:.062 (1.57) GPO-3, U Rated 94V-0 Clips: Brass, Tin Plate Rated: VC Snap-in design for wave soldering Flame Retardant Optional cover protects and insulates fuse - Cat. No. 3527C 3G FUSE ODERS [25.4] CT. NO [3.6] CT. NO Optional cover available - Cat. No. 4245C FUY INSUTED.413 [10.5] Supplied unassembled Shock resistant Fuse can be accessed from board edge Fuse is completely enclosed, protecting use from shorting and breaking.417 [10.6].217 [5.5].047 [1.20] TERMINTION UGS CN BE USED WIT WIRES OR PC MOUNT.140 [3.6] OE [25.4] [35.1] [29.0].866 [22.0].281 [7.2].492 [12.5].040 [1.00].492 [12.5].450 [11.4].078 [1.98].197 [5.0].020 [.50] (2) PS.089 [2.25].052 [1.30] (2) PS SPECIFICTIONS Base: PBT Contacts: Brass, Tin Plate Rated: V C CT. NO older SPECIFICTIONS Base:.062 (1.57) GPO-3, U Rated 94V-0 Clips: Brass, Tin Plate Rated: VC Optional cover available - Cat. No. 4245C PC SNP-IN.062 [1.55].070 [1.80].500 [12.7].220 [5.6] PRESS-FIT, IDE FOR WVE SODERING.920 [23.4].900 [22.9].900 [22.9].078 [2.00] (2) PS SPECIFICTIONS Base:.062 (1.57) G-10, U Rated 94V-0 Clips: Brass, Tin Plate Rated: V C.300 [7.6] (2) PS [34.9].188 [4.8].060 [1.50] [35.0].300 [7.6] (2) PS.070 [1.78] (4) PS.430 [10.9] SNP-IN DESIGN SSURES STBIITY DURING WVE SODERING MODED CSE.703 [17.9].468 [11.9] 42 SPECIFICTIONS Base:.032 (1.57) G-10, U Rated 94V-0 Clips: Brass, Tin Plate Rated: VC CT. NO Optional cover available - Cat. No. 4245C.300 [7.6] (2) PS [34.9].130 [3.3].420 [10.7].060 [1.50] [35.0].300 [7.6] (2) PS.070 [1.78] (4) PS SPECIFICTIONS Base: CP, U Rated 94V-0 Clips:.020 (.51) Brass - Nickel Plated Rated: VC CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED Optional cover available - Cat. No. 4245C [41.9].312 [7.9] DI C'BORE.144 [3.7] OE Mounting ole:.144 (3.7) Dia.

49 MIDGET, SPF (5G) FUSE ODER Designed for SPF (Solar Protection Fuse) Optional cover will protect and insulate fuse Flame resistant SPECIFICTIONS Base & Cover: Nylon, U Rated 94V-0 Clips:.030 (.76) Brass, Matte Tin Plate Rated: 30 mps Operating Temp. Range: -58 F to +292 F (-50 C to +145 C) 3576 (TM) [43.1].714 [18.14] [43.1].714 [18.2] 3574 (SMT).690 [17.6] [38.1] [3.2].158 [4.0] Optional Cover Cat. No. 3576C fits Cat. No & [50.2].690 [17.5] CT. NO older CT. NO. 3576C - Cover only Can be used with clips 3512, 3512P, 3517 and 3518 MTERI: BS, U Rated 94V-0 CT. NO. FUSE SIZE 3517C 5mm 20mm.428 [10.9].098 [2.5] OE (2) PS [25.4].335 (8.5).158 (4.0) FUSE For ittelfuse 392/395 Type TE5 Bussmann: PC Series or equivalent.400 [10.2].375 [9.5] Reliable spring tension assures low contact resistance Fuse holders allow for quick changing of subminiature fuses Ideal for high density circuit board applications.140 [3.6] x.050 [1.3] 3G FUSE BOCKS vailable with fiberglass or phenolic base Fuse clips riveted to base for rugged applications [38.1] [41.3].453 [11.5].625 [15.9] TYP..140 [3.6] FUSE COVERS CT. NO older CT. NO. 3576C - Cover only Made from flame retardant material Protects fuse from shorting and minor bumps W W MTERI: PVC, U isted 94V-0 SUBMINITURE FUSE ODERS SPECIFICTIONS Base: Thermoplastic, U Rated 94V-0 Springs: Beryllium Copper, Gold Plate SPECIFICTIONS Phenolic Base: XP, Black U Rated 94-B Fiberglass Base: GPO-3 U Rated 94 V-0 Clips:.020 (.51) Brass - Nickel Plated Rated: VC Operating Temp. Range: -58 F to +292 F (-50 C to +145 C) BCK FIBER- ODS PENOIC GSS NO. OF CT. NO. CT. NO. FUSES W (12.7) (28.6) (44.5) (60.3) CT. NO. FUSE SIZE W 3527C 5mm 20mm.945 (24.0).314 (8.0).512 (13.0) 3521C 2G.787 (20.0).295 (7.5).452 (11.5) 4245C 3G (33.5).472 (12.0).591 (15.0).335 (8.5) FUSE For ittelfuse 370 Type TR5 Bussmann: BK-EFF series or equivalent Pins: Brass, Tin Plate Current Rating: 5 250V C [50.4] MIN. SQR MIN. (2) PS Can be used with clips or fuse holders FUSE ODERS & COVERS STURDI-MOUNT OW PROFIE STURDI-MOUNT OW PROFIE.121 [3.1].020 [.50] (2) PS..300 [7.6].200 [5.1].100 [2.6].169 [4.3].290 [7.4].300 [7.6].020 [.50] (2) PS..100 [2.6].200 [5.1].100 [2.6].200 [5.1].039 [1.00].374 [9.5].220 [5.6].020 [.50] (2) PS..200 [5.1] [3.0].374 [9.5].169 [4.3].020 [.50] (2) PS..200 [5.1] [3.0] CT. NO CT. NO CT. NO CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED 43

50 Underwriters aboratories, Inc. Recognized Component Program U File Number E U file number E has been assigned to Keystone Electronics fuse clips with end stops. (Refer to pages 44-45) Indicating recognition by Underwriters aboratories Inc. that they are in compliance with their component program. FUSE CIPS vailable for 5mm, 1G, 2G, 3G, 5G, 7G & 8G sizes ow profile, space saving ow contact resistance Withstands shock and vibration Rated 6.3 to 30 mps Custom designs and modifications available to your specifications Refer to pages for Fuse Clip ayout and s 5mm PC Clips PC TRU MOUNT TYPES Snap-fit design enhances assembly and PC retention for wave soldering vailable with orientation legs to assure proper PC installation vailable with or without end stops SURFCE MOUNT & RIVET TYPES vailable with solder lugs or quick-fit tabs.187 (4.7),.205 (5.2).246 [6.3].343 [8.7].246 [6.3].343 [8.7] P.140 [3.6] P B.266 [6.8] With snap-in PC legs MTERI:.020 (.51) Brass, Tin Plate Current Rating: 15 mps MTERI:.020 (.51) Brass, Tin Plate Current Rating: 15 mps CT. NO. B (1.5).060 (1.5) 3518P.060 (1.5).093 (2.4) With or Without Orientation egs CT. NO. B Optional cover available - Cat. No. 3517C (1.5).060 (1.5) 3512P.060 (1.5).093 (2.4) B.064 [1.65].266 [6.8].140 [3.6] With or Without Orientation egs Optional cover available - Cat. No. 3517C FUSE CIPS MTERI:.016 (.41) Brass, Tin Plate Current Rating: 6.3 mps.437 [11.1].230 [5.9].085 [2.15].100 [2.5].300 [7.6].040 [1.00].070 [1.80].280 [7.1] MTERI:.016 (.41) Brass, Tin Plate Current Rating: 15 mps CT. NO CT. NO G or 5mm WIT PC EGS.205 [5.20].197 [5.00] WITOUT PC EGS.140 [3.6].173 [4.4].200 [5.1] 5mm/3G.250 [6.4].360 [9.2].079 [2.00].047 [1.20].173 [4.4].472 [12.00].200 [5.1].049 [1.24] MTERI:.016 (.41) Brass, Tin Plate Current Rating: 15 mps CT. NO. PC EGS END STOP 3521 YES YES 3621 YES NO* 3561 NO YES 3622 NO NO*.043 [1.10].148 [3.75].165 [4.2].288 [7.30].156 [3.95].067 [1.7] (3561, 3622 ONY) Cat. No & 3621 Only.197 [5.00].047 [1.19] MTERI:.016 (.41) Brass, Tin Plate Current Rating: 15 mps CT. NO [12.00].240 [6.10].197 [5.00].157 [4.00].197 [5.00].396 [10.05].047 [1.20].205 [5.20].062 [1.57] 4G (9/32 Dia.) 5G (13/32 Dia.) - Solar Protection Fuse.436 [11.1].312 [7.90] 44 MTERI:.020 (.51) Brass, Nickel Plate Current Rating: 15 mps.303 [7.70].100 [2.55].416 [10.55] MTERI:.030 (.76) Brass, Tin Plate Current Rating: 30 mps CT. NO (Without End Stops)* CT. NO *Fuse clips without end stops are not U recognized RoS COMPINT ~ ISO 9001 CERTIFIED.413 [10.5].484 [12.3].135 [3.5].748 [19.0].146 [3.7].079 [2.00].413 [10.5].089 [2.25]

51 WIT SNP-IN PC EGS.250 (6.4) DIMETER FUSE CIPS Refer to pages for Fuse Clip ayout and s 1G, 3G, 7G, 8G TRU OE MOUNT TYPES WIT SNP-IN PC EGS.280 [7.1].280 [7.1].430 [10.9].421 [10.7] MTERI:.020 (.51) Brass, Tin Plate Current Rating: 15 mps CT. NO [5.8].325 [8.5].098 [2.5].175 [4.5].060 [1.50].300 [7.6].067 [1.70] P MTERI:.020 (.51) Brass, Tin Plate Current Rating: 15 mps CT. NO. B (1.5).060 (1.5) 3515P.060 (1.5).093 (2.4) 3516P.060 (1.5).120 (3.0) B.064 [1.63].300 [7.6].325 [8.3].140 [3.6] With or Without Orientation egs WIT STRIGT PC EGS WIT STRIGT PC EGS MTERI:.020 (.51) Brass, Tin Plate Current Rating: 15 mps CT. NO MTERI:.020 (.51) Brass, Nickel Plate Current Rating: 15 mps CT. NO. B 3533 Flat.656 (16.7) (14.3) 3570 NO TB.312 [7.9].062 [1.55].335 [8.5] WIT SODER UG.156 [4.0].135 [3.5].312 [7.9].280 [7.1].453 [11.5].437 [11.1].100 [2.6].270 [6.9].310 [7.9] B.270 [6.9].067 [1.70].100 [2.6] G, 3G, 7G, 8G RIVET & SURFCE MOUNT TYPES MTERI:.020 (.51) Brass, Tin Plate Current Rating: 15 mps CT. NO. END STOPS (10.7).140 (3.6) NO* (10.7).140 (3.6) YES (10.9).250 (6.4) NO* (10.9).250 (6.4) YES MTERI:.020 (.51) Brass, Nickel Plate Current Rating: 15 mps CT. NO (Without End Stops)* 3510, 3511 WIT NO END STOPS OW PROFIE.280 [7.1].300 [7.6].312 [7.9].312 [7.9].325 [8.3].130 [3.3] 3514, 3529 WIT END STOPS.060 [1.52].300 [7.6].067 [1.70].415 [10.6] FUSE CIPS WIT QUICK-FIT TB WIT OR WITOUT END STOPS.156 [4.0].135 [3.5] TB 3567 WIT NO END STOPS.312 [7.9] 3532 WIT END STOPS.280 [7.1] [11.1] MTERI:.020 (.51) Brass, Nickel Plate Current Rating: 15 mps CT. NO. TB (4.7) (5.2).312 [7.9].453 [11.5].310 [7.9].625 [15.9] MTERI:.020 (.51) Brass, Nickel Plate Current Rating: 15 mps CT. NO. END STOPS 3532 YES 3567 NO*.335 [8.5].136 [3.5] *Fuse clips without end stops are not U recognized RoS COMPINT ~ ISO 9001 CERTIFIED 45

52 REFER TO PGE 44 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. PESE VERIFY YOUR FUSE YOUT PRIOR TO FBRICTION. FIGURE 1 '' DIM [6.8].266 [6.8] 3517 FUSE CIP YOUT & MOUNTING DETIS CT. NO FUSE SIZE DIM. 5mm 20mm.910 (23.1) 3518P CT. NO. 3518P FUSE SIZE DIM. 5mm 20mm.910 (23.1) 3512 CT. NO FUSE SIZE DIM. 5mm 20mm.910 (23.1) 3512P CT. NO. 3512P FUSE SIZE DIM. 5mm 20mm.910 (23.1) FIGURE 2 FIGURE 3 FIGURE 4 FIGURE [6.8].246 [6.3].062 [1.6].095 [2.4] (2) PS.246 [6.3] '' DIM..067 [1.70].067 [1.70] '' DIM..040 [1.02] '' DIM..062 [1.57] (2) PS.040 [1.02] (4) PS.266 [6.8].096 [2.5].246 [6.3].246 [6.3] 3518P P '' DIM [3.3].130 [3.3] 3520 CT. NO FUSE SIZE DIM. 5mm 20mm.900 (22.9).100 [2.6].078 [1.98] 46 RoS COMPINT ~ ISO 9001 CERTIFIED

53 REFER TO PGE 44 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. VERIFY YOUR FUSE YOUT PRIOR TO FBRICTION. FIGURE 6 '' DIM CT. NO FUSE SIZE DIM. 5mm 20mm.650 (16.5) FIGURE 7 FIGURE 8 FIGURE [1.24] '' DIM [5.0] CT. NO FUSE SIZE DIM..047 [1.19] 2G.514 (13.1) 5mm 20mm.710 (18.1) 3561 CT. NO FUSE SIZE DIM. 2G.354 (9.0) 5mm 20mm.500 (12.7).197 [5.0] MIN..157 [4.0] MIN. Pad ayout '' DIM. '' DIM..197 [5.0] MIN G [5.2] 3561 FUSE CIP YOUT & MOUNTING DETIS.062 [1.57] CT. NO FUSE SIZE DIM. 5mm 20mm 3G.820 (20.9) 5mm RoS COMPINT ~ ISO 9001 CERTIFIED 47

54 REFER TO PGES 44 & 45 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. PESE VERIFY YOUR FUSE YOUT PRIOR TO FBRICTION. FIGURE 10 '' DIM [2.6] FOR RIVET 3565 FUSE CIP YOUT & MOUNTING DETIS CT. NO DESIGNTION FUSE SIZE DIM. 4G.281 (7.1) (31.8) (25.4) 3566 CT. NO DESIGNTION FUSE SIZE DIM. SM/SS.406 (10.3) (34.9) (38.5) 5G.406 (10.3) (38.1) (41.7) FIGURE 11 FIGURE [7.6] FIGURE 13 '' DIM..300 [7.6] [1.70] 3514 CT. NO. 3510, 3511, 3513, 3514, 3529 DESIGNTION FUSE SIZE DIM. 1G.250 (6.4).625 (15.9).750 (19.1) 7G.250 (6.4).875 (22.2) (25.4) 8G.250 (6.4) (25.4) (28.6) 3G.250 (6.4) (31.8) (34.9) '' DIM..280 [7.1].062 [1.57] (2) PS W '' DIM..413 [10.5].413 [10.5] 3516P [1.02] (4) PS.089 [2.26].280 [7.1] 3566 CT. NO. 3515, 3515P, 3516P DESIGNTION FUSE SIZE DIM. 1G.250 (6.4).625 (15.9).735 (18.7) 7G.250 (6.4).875 (22.2).985 (25.0) 8G.250 (6.4) (25.4) (28.0) 3G.250 (6.4) (31.8) (34.6) ORIENTTION EGS CT. NO. W (1.57) 3515P.095 (2.4) 3516P.122 (3.1) 48 RoS COMPINT ~ ISO 9001 CERTIFIED

55 REFER TO PGE 45 FOR PRT DIMENSIONS NOTE: MOUNTING DIMENSIONS RE FOR REFERENCE ONY. VERIFY YOUR FUSE YOUT PRIOR TO FBRICTION. FIGURE 14 FOR TRU OE MOUNT PPICTIONS FOR CT. NO DESIGNTION FUSE SIZE DIM. 1G.250 (6.4).625 (15.9).450 (11.4) 7G.250 (6.4).875 (22.2).700 (17.8) 8G.250 (6.4) (25.4).825 (21.0) 3G.250 (6.4) 1.250(31.8) (27.3) FIGURE 15 FOR RIVET MOUNT PPICTIONS FOR CT. NO. 3531, 3533, 3535, 3570, 4246, 4247 DESIGNTION FUSE SIZE DIM. 1G.250 (6.4).625 (15.9).450 (11.4) 7G.250 (6.4).875 (22.2).700 (17.8) 8G.250 (6.4) (25.4).825 (21.0) 3G.250 (6.4) 1.250(31.8) (27.3) FIGURE 16 FOR SURFCE MOUNT PPICTIONS Pad ayout FOR CT. NO. 3531, 3533, 3535, 3570, 4246, 4247 DESIGNTION FUSE SIZE DIM. 1G.250 (6.4).625 (15.9).120 (3.0) 7G.250 (6.4).875 (22.2).365 (9.3) 8G.250 (6.4) (25.4).490 (12.4) 3G.250 (6.4) (31.8).740 (18.8).312 [7.9] MIN..270 [6.9].312 [7.9] MIN. FIGURE 17 FOR SURFCE MOUNT PPICTIONS '' DIM. Pad ayout '' DIM..067 [1.70] '' DIM..136 [3.5].312 [7.9] MIN. FUSE CIP YOUT & MOUNTING DETIS [7.9] '' DIM..312 [7.9] 3567 MIN. MIN. FOR CT. NO. 3532, 3567 DESIGNTION FUSE SIZE DIM. 1G.250 (6.4).625 (15.9).195 (5.0) 7G.250 (6.4).875 (22.2).445 (11.3) 8G.250 (6.4) (25.4).570 (14.5) 3G.250 (6.4) (31.8).820 (20.8).335 [8.5] MIN. RoS COMPINT ~ ISO 9001 CERTIFIED 49

56 TERMINS & TEST POINTS Today s high tech electronics require space saving, low cost methods for connecting and testing circuitry. Our complete line of PC terminals, screw terminals, headers and test points are designed to meet the interconnect and testing challenges for electronic and electrical component termination points. pplications include: Multi-Insertion applications Replacement for pc screw edge connectors, blocks or strips Surface mount and thru-hole PCB designs U approved devices Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.

57 TERMINS & TEST POINTS IGTOR CIPS SCREW TERMINS Binding Post ,67 Color Coded, PC eavy Duty , 65, 66 Metric SEMS Screw Swage Mount QUICK FIT TERMINS Male SECTION CONTENTS Female eaders SODER UGS SODERESS TERMINS TEST POINTS Color Coded TM (Thru ole Mount) SMT (Surface Mount)

58 PC QUICK-FIT ME TERMINS Underwriters aboratories, Inc. Recognized Component Program U File Number E (2.8) TB.110 [2.8].062 [1.55].048 [1.20].110 (2.8) TB U file number E has been assigned to Keystone Electronics Quick-Fit terminals (Refer to pages 52-54) indicating recognition by Underwriters aboratories Inc. that they are in compliance with their component program. Underwriters aboratories Inc. component program assures that Quick-Fit terminals meet the dimensional and performance requirements of the National Electrical Manufacturers ssociation specification number NEM (1988) and U (2.8) &.187 (4.8) TB.280 [7.1].542 [13.8].050 [1.27].045 [1.14].187 [4.8] CT. NO. MTERI MTG. OE (.50) Brass, Tin Plate.046 (1.2) Dia (.80) Brass, Tin Plate.052 (1.3) Dia..187 (4.8) TB STURDI-MOUNT.156 [4.0] PC QUICK-FIT TERMINS.057 [1.45].110 [2.8].050 [1.27].045 [1.14] CT. NO. MTERI MTG. OES (.50) Brass, Tin Plate.046 (1.2) Dia (.80) Brass, Tin Plate.052 (1.3) Dia..055 [1.40].050 [1.27].045 [1.14].525 [13.4].048 [1.20].285 [7.3].150 [3.8].187 (4.8) TB.187 (4.8) TB.187 [4.8].150 [3.8] Material: Brass, Tin Plate MT MTG. CT. NO. TICK OES (12.7).020 (.50).046 (1.2) Dia (12.7).032 (.80).052 (1.3) Dia (21.8).032 (.80).052 (1.3) Dia..062 [1.6].048 [1.2] OE TB.187 [4.8].055 [1.40].050 [1.27].045 [1.14].215 [5.5].510 [13.0].200 [5.1] STURDI-MOUNT.281 [7.15].140 [3.6].040 [1.0].220 [5.6] Material:.020 (.50) Brass, Tin Plate Mtg oles:.046 (1.2) Dia..110 (2.8) TB.187(4.8) TB CT. NO. NGE CT. NO 4915* * 4916* * 4917* *.120 [3.1] CT. NO. MTERI MTG. OES 1285-ST.020 (.50) Brass, Tin Plate.046 (1.2) Dia ST.032 (.80) Brass, Tin Plate.052 (1.3) Dia..051 [1.30].570 [14.5] CT. NO. MTERI MTG. OES (.50) Brass, Tin Plate.043 (1.1) Dia..120 [3.1].187 [4.8].245 [6.2].187 (4.8) TB.187 [4.8].416 [10.6].177 [4.5].040 [1.00].256 [6.5].080 [2.1].050 [1.27].045 [1.14].560 [14.2].055 [1.40].340 [8.7].150 [3.8] CT. NO. MTERI MTG. OES (.50) Brass, Tin Plate.046 (1.2) Dia (.80) Brass, Tin Plate.052 (1.3) Dia..205 (5.2) TB.205 (5.2) TB.205 (5.2) TB STURDI-MOUNT.070 [1.80].500 [12.7].050 [1.27].045 [1.14].205 [5.2].150 [3.8].205 [5.2].070 [1.80].510 [13.0].050 [1.27].045 [1.14].281 [7.15].140 [3.6].120 [3.1].205 [5.2].050 [1.27].045 [1.14].560 [14.2].070 [1.80].340 [8.7].150 [3.8] CT. NO. MTERI MTG. OES (.50) Brass, Tin Plate.046 (1.2) Dia (.80) Brass, Tin Plate.052 (1.3) Dia. CT. NO. MTERI MTG. OES 1286-ST.020 (.50) Brass, Tin Plate.046 (1.2) Dia ST.032 (.80) Brass, Tin Plate.052 (1.3) Dia. CT. NO. MTERI MTG. OES 4905*.020 (.50) Brass, Tin Plate.046 (1.2) Dia. 4909*.032 (.80) Brass, Tin Plate.052 (1.3) Dia. * Not U Recognized 52 RoS COMPINT ~ ISO 9001 CERTIFIED

59 .250 (6.4) TB.250 (6.4) PC QUICK-FIT ME TBS.250 (6.4) TB STURDI-MOUNT DU.110 (2.8)/.250 (6.4) TB.070 [1.80].312 [7.9].070 [1.80].312 [7.9].110 [2.8].048 [1.20].312 [7.9].062 [1.57].178 [4.5] [7.9].552 [9.4] [14.0].178 [4.5].312 [7.9].552 [14.0].178 [4.5] [7.1].552 [9.4] [14.0].312 [7.9].050 [1.27].045 [1.14].150 [3.8].050 [1.27].045 [1.14].150 [3.8].120 [3.1].050 [1.27].045 [1.14].150 [3.8] CT. NO. MTERI MTG. OES (.80) Brass, Tin Plate.052 (1.3) Dia. CT. NO. MTERI MTG. OES 1287-ST.032 (.80) Brass, Tin Plate.052 (1.3) Dia. CT. NO. MTERI MTG. OES (.80) Brass, Tin Plate.052 (1.3) Dia..250 (6.4) TB.250 (6.4) TB STURDI-MOUNT STURDI-MOUNT.250 (6.4) TB STURDI-MOUNT.156 [4.0].312 [7.9].250 [6.4].172 [4.4].187 [4.8].335 [8.5].070 [1.80].537 [13.7] CT NO [9.7] CT NO [3.5].060 [1.52] MTERI:.032 (.80) Brass, Matte Tin Plate.070 [1.80] CT. NO. NGE * [2.3].050 [1.27].045 [1.14].070 [1.80].610 [15.5].273 [7.0].250 (6.4) TB.250 (6.4) TB.250 (6.4) TB.312 [7.9].178 [4.5].150 [3.8] MTG. OES.067 (1.7) Dia. MTERI:.032 (.80) Brass, Matte Tin Plate CT. NO. MTG. OES (13.7) (18.0).067 (1.7) Dia. STURDI-MOUNT.156 [4.0].438 [11.2].187 [4.8].060 [1.52].138 [3.5] CT. NO. MTERI MTG. OES (.80) Brass, Tin Plate.067 (1.7) Dia..070 [1.80].470 [12.0].710 [18.1].050 [1.27].045 [1.14].312 [7.9].178 [4.5].150 [3.8].120 [3.1] CT. NO. MTERI MTG. OES 1289-ST.032 (.80) Brass, Tin Plate.052 (1.3) Dia..062 [1.6].178 [4.5].312 [7.9].070 [1.80] [31.0].312 [7.9].312 [7.9].050 [1.27].045 [1.14].430 [10.9].200 [5.1].280 [7.1] MTERI:.032 (.80) Brass, Matte Tin Plate CT. NO. NGE MTG. OES (1.3) Dia [4.5].515 [13.1].150 [3.8].040 [1.02](3).312 [7.9] CT. NO. MTERI MTG. OES (.80) Brass, Tin Plate.052 (1.3) Dia. PC QUICK-FIT TERMINS.250 (6.4) TB.250 (6.4) TB.250 (6.4) TB.178 [4.5].590 [15.0].070 [1.80].178 [4.5].789 [20.1].070 [1.80].178 [4.5].985 [25.0].070 [1.80].106 [2.7].040 [1.00].350 [8.9].350 [8.9].280 [7.1].312 [7.9].150 [3.8].056 [1.42].051 [1.30].312 [7.9].050 [1.27].045 [1.14].150 [3.8].437 [11.1].580 [14.8].312 [7.9].110 [2.8].093 [2.4] CT. NO. MTERI MTG. OES (.80) Brass, Tin Plate.056 (1.4) Dia. CT. NO. MTERI MTG. OES (.80) Brass, Tin Plate.052 (1.3) Dia. CT. NO. MTERI MTG. OES 1265*.032 (.80) Brass, Tin Plate.106 (2.7) Dia. * Not U Recognized RoS COMPINT ~ ISO 9001 CERTIFIED 53

60 .250 (6.4) STURDI-MOUNT PC QUICK-FIT EDERS Ideal for rugged multi-insertion applications Pre-assembled header reduces PC assembly costs Increases PC board retention strength Keeps terminals perpendicular Maintains position for wave soldering VIBE IN BRSS OR STEE TBS SPECIFICTIONS Material:.032 (.80) Brass or Steel, Tin Plated Insulator: Thermoplastic, U Rated 94V-0 Current Rating: V C Temperature Rating: -58 F to +292 F (-50 C to +145 C) ORIZONT VERTIC OW PROFIE.787 [20.0].250 [6.3].250 [6.4].433 [11.0].827 [21.0].591 [15.0] QUICK-FIT TERMINS.157 [4.0].045 [1.1] BRSS STEE NO. TBS TBS OF CT. NO. CT. NO. TBS DIM (8.2) (14.3) (19.4) (24.4) (29.5).110 (2.8) -.187(4.8) (6.4) TBS.157 [4.0].045 [1.1] RIVET MOUNT QUICK-FIT TERMINS U recognized bright brass Quick-Fit terminals Rivet mount male tab versions meet NEM 2-E & U 310 specifications BRIGT BRSS MTTE TIN = 45 = 90 TB MT W OE = 45 = 90 CT. NO. CT. NO. SIZE TICK TB WIDT CT. NO. CT. NO (2.8).020 (.51).365 (9.3).180 (4.6).096 (2.4) (4.8).020 (.51).375 (9.5).250 (6.4).100 (2.5) (6.4).032 (.81).406 (10.3).306 (7.8).130 (3.3) TB OE W BRSS STEE NO. TBS TBS OF CT. NO. CT. NO. TBS DIM (8.2) (14.3) (19.4) (24.4) (29.5) W OE.138 [3.5] Designed for repeated mating cycles For tabs (2.8mm) to (6.4mm) TB.039 [1.0].197 [5.0].197 [5.0] BRSS STEE NO. TBS TBS OF CT. NO. CT. NO. TBS DIM (8.1) (13.1) (18.1) (23.1) (28.1).110 (2.8) (4.8) (6.4) TBS BRIGT BRSS MTTE TIN = 45 = 90 TB MT W OE = 45 = 90 CT. NO. CT. NO. SIZE TICK TB WIDT CT. NO. CT. NO (2.8).020 (.51).360 (9.1).180 (4.6).096 (2.4) (4.8).020 (.51).315 (8.0).250 (6.4).100 (2.5) (6.4).032 (.81).400 (10.1).306 (7.8).130 (3.3) (2.8) TB.187 (4.8) (6.4) TBS MUTIPE.250 (6.4) TB.130 [3.3].110 [2.8] TB [9.5].048 [1.20].109 [2.7].062 [1.55].109 [2.8].619 [15.7].375 [9.5] OE.343 [8.7].296 [7.5].406 [10.3].343 [8.7].218 [5.5] MTERI:.020 (.51) Brass, Tin Plate CT. NO. NGE [6.7].135 [3.4] 45 TB MTERI:.020 (.51) Brass, Tin Plate CT. NO. TB OE (5.2).132 (3.4).070 (1.78) Slot (4.7).078 (1.98) Dia. ole BRIGT BRSS MTERI:.032 (81) Bright Brass CT TB NO. PIRS SIZE (17.4) (27.0) (36.6).250 (6.4) (46.2) 54 RoS COMPINT ~ ISO 9001 CERTIFIED

61 PC QUICK-FIT FEME TERMINS CCEPTS.110 (2.8).032 (.81) TB SMT - ORIZONT ENTRY.156 [4.0].250 [6.4] CCEPTS TBS.110 (2.8) TO.50 (6.4).020 (.50) TO.032 (.80) SMT - VERTIC OR ORIZONT ENTRY.150 [3.8].185 [4.7].075 [1.9] [2.54] [2.7].312 [7.9].090 [2.3].282 [7.2].062 [1.6].100 [2.5].242 [6.2].176 [4.5] SPECIFICTIONS Material:.012 (.30)Brass, Tin-Nickel Plate Current Rating: V C CT. NO. 3569* (Bulk) CT. NO. 3569TR* (Tape & Reel) Tape & Reel Spec s: 24mm wide, 8mm pitch, 13 inch reel (2000 pieces per reel) MTERI:.016 (.41) Brass, Tin-Nickel Plate CT. NO. ORIENTTION 3557 top & side entry 3577* bottom entry.212 [5.4].062 [1.55] CCEPTS.110 (2.8) TB ORIZONT ENTRY.280 [7.1] [2.5] [1.00].400 [10.2].070 [1.80] CT. NO. CCEPTS TB (2.8).020 (.51) (2.8).032 (.81) CCEPTS.205 (5.2) TB VERTIC ENTRY VERTIC OR ORIZONT ENTRY.150 [3.8].400 [10.2].134 [3.4].156 [4.0].075 [1.90].271 [6.9].105 [2.7].100 [2.6].185 [4.7].062 [1.6].032 [0.8] Cat. No [3.4].067 [1.7] (2)PS..400 [10.1].076 [1.9].046 [1.15].312 [7.9] CCEPTS TBS.110 (2.8) TO.50 (6.4).020 (.50) TO.032 (.80).150 [3.8] SPECIFICTIONS Material:.016 (.40)Brass, Tin-Nickel Plate Current Rating: V C.134 [3.4] Cat. No [1.6].040 [1.0].067 [1.7] (2)PS. TERMIN CERENCE CCEPTS.110 (2.8) TB VERTIC ENTRY MTERI: MTERI:.012 (.30) Brass, Tin-Nickel Plate.012 (.30) Brass, Tin-Nickel Plate CT..440 [11.2] CT. NO. 3586* (Bulk) CT. NO. 3586TR* (Tape & Reel) Tape & Reel Spec s: 16mm wide, 12mm pitch, 13 inch reel (750 pieces per reel) W (Ref) CCEPTS.250 (6.4) TB VERTIC ENTRY CCEPTS.187 (4.8),.205 (5.2),.250 (6.4) TB ORIZONT ENTRY MTERI: Brass, Tin-Nickel Plate CT. MT NO. CCEPTS TB W TICK (4.8).020(.51) 3572*.187(4.8).032(.81).222 (5.6).162 (4.1).012 (.30) (5.2).020(.51) (5.2).032(.81).240 (6.1).180 (4.6).012 (.30) (6.4).032(.81).291 (7.4).205 (5.2).016 (.41).156 [4.0].196 [5.0].144 [3.7] NO. CCEPTS TB W (2.8).020(.51).070 (1.80) (2.8).032(.81).075 (1.92).062 [1.55].086 [2.2].291 [7.4].144 [3.7].067 [1.7].212 [5.4].065 [1.30].062 [1.55].252 [6.4].062 [1.55].067 [1.7] TYP..105 [2.7].232 [5.9].420 [10.7].150 [3.8] W (Ref).250 [6.4].400 [10.2] Underwriters aboratories, Inc. Recognized Component Program U File Number E CCEPTS.187 (4.8) TB VERTIC ENTRY.146 [3.7].050 [1.25] MTERI:.016 (.41) Brass, Tin-Nickel Plate CT. NO. CCEPTS TB W (4.8).020(.51).093 (2.36) 3578*.187(4.8).020(.51).093 (2.36) (4.8).032(.81).102 (2.59) *ow insertion force design CCEPTS.312 (7.9) TB OVER SIZED.392 [10.0] W.098 [2.5].100 [2.5].400 [10.1].104 [2.6].067 [1.70].052 [1.30] FEME PC QUICK-FIT TERMINS.437 [11.1].250 [6.3].281 [7.1].437 [11.1].250 [6.3].281 [7.1].422 [10.7].578 [14.7].375 [9.5].070 [1.80].076 [1.90] MTERI:.016 (.41) Brass, Tin-Nickel Plate CT. NO. CCEPTS TB (5.2).020 (.51) 3575*.205 (5.2).032 (.81).120 [3.0].089 [2.3].050 [1.3].091 [2.3] MTERI:.016 (.41) Brass, Tin-Nickel Plate CT. NO. CCEPTS TB (6.4).032 (.81).110 [2.8].100 [2.54].180 [4.6].106 [2.7] MTERI:.020 (.51) Copper, Tin-Nickel Plate CT. NO [2.8].180 [4.6].328 [8.35].152 [3.86] * Not U Recognized RoS COMPINT ~ ISO 9001 CERTIFIED 55

62 QUICK-FIT FEMES FEME NON-INSUTED VINY BOOT For.250 (6.4) QUICK-FITS Easily slips over terminal Insulates and protects TB SIZE ME NON-INSUTED MTERI: Tinned Brass CT. MTES WIT ME TB WG MT NO. WIDT TICK SIZE TICK (2.8).020 (.51).640 (16.3) (.25) (4.8).020 (.51).576 (14.6) (.33) (5.2).020 (.51).640 (16.3) (.33) SODERESS QUICK-FIT TERMINS SPECIFICTIONS: Terminals: EPT Copper Insulation: Vinyl RoS (Non-RoS Compliant) Boot and Quick-Fit sold separately CT. BOOT NO. COOR 4471 CER 4472 RED 4473 BUE 4474 YEOW FEME NON-INSUTED.187 [4.7].354 [9.0].298 [7.6].140 [3.5].920 [23.4].131 [3.3] SODERESS TERMINS WIDT WIDT FIG. 1 ME VINY INSUTED WIDT WIRE MX CT. RNGE ME TB BRRE INSUTION NO. (WG) WIDT TICK ENGT I.D. DIMETER / (4.8).020 (.51).85 (21.6).24 (6.3).080 (2.03).145 (3.7) 8287 (Red).250 (6.4).032 (.81).93 (23.6).25 (6.4).065 (1.65).145 (3.7) / (4.8).020 (.51).85 (21.6).24 (6.3).080 (2.03).145 (3.7) 8289 (Blue).250 (6.4).032 (.81).93 (23.6).25 (6.4).085 (2.16).170 (4.3) /10 (Yellow).250 (6.4).032 (.81) 1.05 (26.7).25 (6.4).150 (3.8).250 (6.4) FIG. 2 WIRE CT. RNGE ME TB BRRE NO. (WG) FIG. WIDT TICK ENGT I.D (4.8).020 (.51).64 (16.3).24 (6.3).080 (2.03) / (6.4).032 (.81).73 (18.5).25 (6.4).065 (1.65) (4.8).020 (.51).64 (16.3).24 (6.3).080 (2.03) / (6.4).032 (.81).73 (18.5).25 (6.4).085 (2.16) / (6.4).032 (.81).75 (19.1).25 (6.4).150 (3.8) WIDT WIRE MTES WIT BRRE CT. RNGE ME TB.250 (6.4) NO. (WG) WIDT TICK I.D (4.8).020 (.51).58 (14.7).085 (2.16) 22/ (6.4).032 (.81).66 (16.8).080 (2.03) (4.8).020 (.51).58 (14.7).085 (2.16) / (6.4).032 (.81).66 (16.8).080 (2.03) FEME VINY INSUTED WIDT WIRE MTES WIT BRRE MX CT. RNGE ME TB.250 (6.4) INSUTION NO. (WG) WIDT TICK I.D. DIMETER / (4.8).020 (.51).78 (19.8).085 (2.16) 8277 (Red).250 (6.4).032 (.81).87 (22.1).080 (2.03).145 (3.7) / (4.8).020 (.51).78 (19.8).085 (2.16) 8279 (Blue).250 (6.4).032 (.81).87 (22.1).080 (2.03).145 (3.7) /10 (Yellow).250 (6.4).032 (.81).96 (24.4).165 (4.2).250 (6.4) ME FUY INSUTED NYON FEME FUY INSUTED NYON D D W WIDT W WIDT 56 WIRE BRRE MX. CT. RNGE ME TB.250 (6.4) INSU. NO. (WG) WIDT TICK W D ENGT I.D / (4.8).020 (.51).87 (22.1).37 (9.4).30 (7.6).24 (6.3).080 (2.03).145 (3.7) 8297 (Red).250 (6.4).032 (.81).95 (24.1).44 (11.2).30 (7.6).25 (6.4).065 (1.65).145 (3.7) / (4.8).020 (.51).87 (22.1).37 (9.4).30 (7.6).24 (6.3).080 (2.03).170 (4.3) 8299 (Blue).250 (6.4).032 (.81).95 (24.1).44 (11.2).30 (7.6).25 (6.4).085 (2.16).170 (4.3) /10 (Yellow).250 (6.4).032 (.81) 1.05 (26.7).47 (11.9).39 (9.9).25 (6.4).150 (3.8).250 (6.4) RoS COMPINT ~ ISO 9001 CERTIFIED WIRE MTES WIT BRRE MX. CT. RNGE ME TB.250 (6.4) INSU. NO. (WG) WIDT TICK W D I.D / (4.8).020 (.51).81 (20.6).30 (7.6).23(5.8).085 (2.16).145 (3.7) 8292 (Red).250 (6.4).032 (.81).87 (22.1).37 (9.4).23(5.8).080 (2.03).145 (3.7) / (4.8).020 (.51).81 (20.6).30 (7.6).23(5.8).085 (2.16).145 (3.7) 8294 (Blue).250 (6.4).032 (.81).87 (22.1).37 (9.4).23(5.8).080 (2.03).170 (4.3) /10 (Yellow).250 (6.4).032 (.81).99 (25.1).39 (9.9).32(8.1).165 (4.2).250 (6.4)

63 W.250 [6.4] SODERESS TERMINS SPECIFICTIONS: Terminals: EPT Copper Insulation: Vinyl RoS (Non-RoS Compliant) RING TONGUE NON-INSUTED RING TONGUE INSUTED W WIRE FOR CT. RNGE STUD MT BRRE NO. (WG) SIZE W E TICK I.D (6.4).60 (15.2).47 (11.9) / (8.4).70 (17.8).54 (13.7).030 (.76).070 (1.78) (8.4).70 (17.8).54 (13.7) (6.4).60 (15.2).47 (11.9) / (8.4).70 (17.8).54 (13.7).030 (.76).090 (2.29) (8.4).70 (17.8).54 (13.7) (7.1).68 (17.3).54 (13.7) / (9.7).73 (18.5).54 (13.7).040 (1.02).135 (3.4) (9.7).73 (18.5).54 (13.7) E BRRE WIRE FOR.250 (6.4) MX. CT. RNGE STUD MT ONG INSU. NO. (WG) SIZE W E TICK I.D (6.4).80 (20.3).67 (17.0) / (8.4).90 (22.9).74 (18.8).030 (.76).070 (1.78) 8211 (Red) (8.4).90 (22.9).74 (18.8).145 (3.7) / (6.4).80 (20.3).67 (17.0) (8.4).90 (22.9).74 (18.8).030 (.76).090 (2.29) 8214 (Blue) (8.4).90 (22.9).74 (18.8).170 (4.3) / (7.1).98 (24.9).84 (21.3) (9.7) 1.03 (26.2).84 (21.3).040 (1.02).135 (3.4) (Yellow) (9.7) 1.03 (26.2).84 (21.3).250 (6.4) E BOCK SPDE NON-INSUTED W WIRE FOR FNGED CT. RNGE STUD MT BRRE CT. NO. (WG) SIZE W E TICK I.D. NO / (7.6).65 (16.5).50 (12.7).030 (.76).090 (2.29) / (7.6).65 (16.5).50 (12.7).030 (.76).090 (2.29) / (8.1).73 (18.5) 54 (13.7).040 (1.02).135 (3.4) W E.250 [6.4] SNP SPDE NON-INSUTED WIRE FOR CT. RNGE STUD MT BRRE NO. (WG) SIZE W E TICK I.D (6.4) / (7.6).68 (17.3).50 (12.7).030 (.76).070 (1.78) (8.1) (6.4) (7.6) / (8.1).68 (17.3).50 (12.7).030 (.76).090 (2.29) (7.3) / (8.1).73 (18.5).53 (13.6).040 (1.02).135 (3.4) (8.1) E.250 [6.4] Flanged ND CRIMP TOO BOCK SPDE INSUTED W W SNP SPDE INSUTED E BRRE WIRE FOR.250 (6.4) MX. CT. RNGE STUD MT ONG INSU. NO. (WG) SIZE W E TICK I.D (6.4) / (7.6) 8265 (Red) (8.1).88 (22.4).70 (17.8).030 (.76).070 (1.78).145 (3.7) (6.4) /14 (Blue) 8.30 (7.6) (8.1).88 (22.4).70 (17.8).030 (.76).090 (2.29).170 (4.3) (7.3) / (8.1) 1.03 (26.2).83 (21.2).040 (1.02).135 (3.4).250 (6.4) (Yellow) (8.1) E Flanged BRRE WIRE FOR.250 (6.4) MX. FNGED CT. RNGE STUD MT ONG INSU. CT. NO. (WG) SIZE W E TICK I.D. NO / (7.6).85 (21.6).70 (17.8).030 (.76).070 (1.78).145 (3.7) (Red) / (7.6).85 (21.6).70 (17.8).030 (.76).090 (2.29).175 (4.4) (Blue) / (8.1) 1.03 (26.2).84 (21.3).040 (1.02).135 (3.4).255 (6.5) (Yellow) SODERESS TERMINS Confined trapezoid-type crimping dies for insulated terminals Indentor-type crimping die for non-insulated terminals nvil-type wire cutter is precision ground CT. NO Slots for looping solid wire Crimping die for non-insulated terminals Precision ground scissors action wire cutter Threaded bolt cutter for five common sizes RoS COMPINT ~ ISO 9001 CERTIFIED Wire Stripper is also handy wire gauge (22 thru 8 WG) F type crimping die 7-8 mm for automotive terminals 57

64 PC TERMIN UGS.312 [7.9].312 [7.9] [9.9] [14.3].130 [3.3].130 [3.3].075 [1.91].062 [1.57].156 [4.0] MTERI:.016 (.40) Brass, Tin Plate CT. NO. 680 OCKWSER TERMIN UGS MTERI:.020 (.51) Brass, Tin Plate CT. NO (12.7) (14.3) (19.1) (25.4).625 [15.9].375 [9.5].312 [7.9].093 [2.36].093 [2.36] RDIUS.312 [7.9] [8.7] [18.3].093 [2.36] (2) PS.093 [2.36] RDIUS.875 [22.2].625 [15.9].312 [7.9].093 [2.36].171 [4.4].734 [18.7].500 [12.7].312 [7.9].093 [2.36].156 [4.0] TERMIN UGS MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8.180 [4.6].464 [11.8].296 [7.5].093 [2.35] I..078 [1.98].078 [1.98] RDIUS MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8.640 [16.3].234 [6.0].250 [6.4].312 [7.9].093 [2.36] (2) PS.093 [2.36] RDIUS MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) # (5.0) # [20.6].234 [6.0].265 [6.8].312 [7.9].093 [2.36].086 [2.17] RDIUS MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8.729 [18.6].158 [4.1].218 [5.6].312 [7.9].093 [2.36].156 [4.0] MTERI:.013 (.33) Brass, Tin Plate CT. NO. 907 MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8 MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) # (5.0) #10 SODER TERMIN UGS MTERI:.018 (.46) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8.281 [7.2].312 [7.9].265 [6.8].531 [13.5].312 [7.9].076 [1.93].080 [2.03] RDIUS.515 [13.1].312 [7.9].136 [3.0].093 [2.36].080 [2.03] RDIUS [22.3] [15.9].093 [2.36].171 [4.4] [17.5] [11.1].078 [1.98].140 [3.6] 58 MTERI:.015 (.38) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8 MTERI:.016 (.41) Brass, Tin Plate CT. NO MTERI:.020 (.51) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) #8 RoS COMPINT ~ ISO 9001 CERTIFIED MTERI:.020 (.51) Brass, Tin Plate CT. NO. STUD SIZE (3.1) # (3.6) # (4.4) # (5.0) #10

65 PC TEST POINTS - SOTTED & OOP TYPES ow profile, space saving designs for dense packaging Wide variety of configurations to suit most applications Safe, practical, economical replacement for wire-wrap posts Easy mount design, ideal for wave soldering Re-fit PC boards without need for re-design Provides easy access for production testing and field service troubleshooting Positive grip when using J hooks, EZ hooks, grabbers, clips, tips and probes Custom test point terminals can be manufactured to your specifications Other platings and materials available upon request MTERI: Brass, Tin Plate.032 [.81] (2) PS..070 [1.78].035 [.89] MTERI:.025 (.64) Brass CT. NO (3.0) (4.0).039 [1.00].078 [1.98].047 [1.19].062 [1.57] CT. NO [3.18] MTERI:.024 (.64) Brass.110 [2.8].355 [9.0].067 [1.70].075 [1.90].114 [2.9].100 [2.5].130 [3.30].060 [1.52] X.100 [2.5].150 [3.8].063 [1.60] MTERI:.032 (.81) Brass CT. NO (7.0) (3.8).032 [.81].035 [.90].060 [1.52].039 [1.00] CT. NO [1.98].196 [5.0].312 [7.9].121 [3.1].039 [.99].097 [2.5].047 [1.19].044 [1.12] MTERI:.016 (.41) Brass MTERI:.025 (.64) Brass MTERI:.020 (.51) Brass MTERI:.025 (.64) Brass CT. NO CT. NO CT. NO CT. NO [1.19].169 [4.3].060 [1.52].039 [1.00].117 [3.0].100 [2.5].218 [5.5].043 [1.09] CT. NO [2.4].050 [1.27].275 [7.0].115 [2.9].047 [1.19].218 [5.5].110 [2.8].100 [2.5].157 [4.0].177 [4.5].105 [2.7].055 [1.40].039 [1.00].400 [10.2] CT. NO [2.4].355 [9.0].047 [1.19] X.078 [1.98].047 [1.19].055 [1.40] X.087 [2.20].050 [1.27].200 [5.1] MTERI:.020 (.51) Brass MTERI:.020 (.51) Brass MTERI:.025 (.64) Brass CT. NO CT. NO CT. NO [2.9].098 [2.5].035 [.89].071 [1.80].126 [3.2].047 [1.19].118 [3.0].039 [1.00] MTERI:.020 (.51) Brass MTERI:.025 (.64) Brass MTERI:.025 (.64) Brass MTERI:.025 (.64) Brass.050 [1.30] x.098 [2.50].060 [1.52].060 [1.52].110 [2.8].417 [10.6].156 [4.0].197 [5.0].110 [2.8].070 [1.78] DI (2) PS..069 [1.75].156 [4.0].110 [2.8].239 [6.1].275 [7.0].138 [3.5].118 [3.0].039 [1.00].047 [1.20] x.098 [2.5].055 [1.40] CT. NO W.047 [1.19].047 [1.19].039 [1.00].110 [2.8].040 [1.02].275 [7.0].115 [2.9].118 [3.0].195 [5.0] MTERI:.025 (.64) Brass CT. NO. W (1.20).087 (2.21) (1.60).098 (2.50) PC TEST POINT TERMINS CUSTOM TERMINS Custom terminals can be machined to your exact specifications. Standard and special terminals can be staked onto special boards. Please /fax your design to our Engineering Department..047 [1.19] X.093 [2.36].171 [4.3].118 [3.0].054 [1.37].051 [1.30].156 [4.0].064 [1.63] DI.055 [1.40].160 [4.1] CT. NO CT. NO CT. NO CT. NO. 680 RoS COMPINT ~ ISO 9001 CERTIFIED.138 [3.5].234 [5.9].118 [3.0].047 [1.19].236 [6.0].531 [13.5].256 [6.5].562 [14.3].156 [4.0] MTERI:.025 (.64) Brass MTERI:.025 (.64) Brass MTERI:.020 (.51) Brass MTERI:.015 (.38) Brass.390 [9.9].312 [7.9].130 [3.3].062 [1.57] 59

66 (TM) TRU OE MOUNT TEST POINTS - COOR KEYED Color keyed for visibility and quick identification Economical choice for PC test point terminations Snap-fit mounting provides positive retention for wave soldering Wire form loop for safe, non-slip testing Space saving, ultra low and low profile designs igh profile design for difficult to reach applications Suitable for high density packaging on.062 (1.57) and.093 (2.36) PC boards Practical replacement for wire-wrap posts and turrets Secure grip for J hooks, EZ hooks, grabbers, alligator clips, tips or probes igh tempurature nylon base ideal for reflow soldering Ideal for reliable production testing and field service troubleshooting COOR KEYED MINITURE COMPCT MUTIPURPOSE.070 [1.80] I.D..070 [1.80] I.D..350 [8.9].120 [3.0].220 [5.6].445 [11.3].120 [3.0].320 [8.1] TM TEST POINTS SPECIFICTIONS Terminal:.010 (.25).020 (.51) Phosphor Bronze, Silver Plate Base: Nylon 46, U Rated 94V-0 Mtg. ole:.040 (1.0) Diameter CT. BSE CT. BSE NO. COOR NO. COOR 5000 RED 5115 BROWN 5001 BCK 5116 GREEN 5002 WITE 5117 BUE 5003 ORNGE 5118 GREY 5004 YEOW 5119 PURPE MTERI:.017 (.43) Dia. Phospher Bronze Silver plate Mtg ole:.040 (1.0) UTR OW PROFIE SOWN S INSTED INTO.040 [1.02] MOUNTING OE SPECIFICTIONS Terminal:.015 (.38).032 (.81)Phosphor Bronze, Silver Plate Base: Nylon 46, U Rated 94V-0 Mtg. ole:.063 (1.6) Diameter CT. BSE CT. BSE NO. COOR NO. COOR 5005 RED 5120 BROWN 5006 BCK 5121 GREEN 5007 WITE 5122 BUE 5008 ORNGE 5123 GREY 5009 YEOW 5124 PURPE.100 [2.5].100 [2.5].094 [2.4].350 [8.9] SPECIFICTIONS Terminal:.015 (.38).032 (.81) Phosphor Bronze, Silver Plate Base: Nylon 46, U Rated 94V-0 Mtg. ole:.063 (1.6) Diameter SOWN S INSTED INTO.040 [1.02] MOUNTING OE CT. BSE CT. BSE NO. COOR NO. COOR 5010 RED 5125 BROWN 5011 BCK 5126 GREEN 5012 WITE 5127 BUE 5013 ORNGE 5128 GREY 5014 YEOW 5129 PURPE OW PROFIE MTERI:.016 (.40).028 (.71) Phospher Bronze Silver plate Mtg ole:.040 (1.0) CT. NO CT. NO STNDRD RGE.100 [2.5].150 [3.8] MTERI:.020 (.50) Dia. Phospher Bronze Silver plate Mtg ole:.073 (1.85) SOWN S INSTED INTO.067 [1.70] TO.078 [1.98] MOUNTING OE.350 [8.9].400 [10.2] SOWN S INSTED INTO.112 [2.84] TO.078 [1.98] MOUNTING OE MTERI:.020 (.50) Dia. Phospher Bronze Silver plate Mtg ole:.114 (2.9) CT. NO CT. NO JUMPERS.100 SPCING.200 SPCING [2.5].040 [1.0] (2) PS. MTERI:.020 (.50) Dia. Phospher Bronze Silver plate Mtg ole:.040 (1.0) SOWN S INSTED INTO TWO.040 [1.02] MOUNTING OE.100 [2.54].200 [5.08] RoS COMPINT ~ ISO 9001 CERTIFIED.300 [7.6] SOWN S INSTED INTO TWO.040 [1.02] DI MOUNTING OE MTERI:.016 (.40).028 (.71) Phospher Bronze Silver plate Mtg ole:.040 (1.0) CT. NO CT. NO [1.0] (2) PS.

67 SPECIFICTIONS Contact Material:.010 (.25) Phosphor Bronze Contact Finish: Silver Plate Tape Material: 8mm wide; 4mm pitch; conductive polycarbonate carrier tape meets NSI/EI-481 standard (SMT) SURFCE MOUNT TEST POINTS ON TPE & REE Manufactured using flat wire to provide a large mounting surface area Ideal for use with miniature probes, clips, and hooks Efficient, safe, board level testing Ultra low profile, ideally suited for advanced surface mount printed circuit board applications Designed for long life and durability.105 [2.7] MICRO MINITURE SUPPIED ON TPE ND REE.040 [1.00].040 [1.00].060 [1.50] Pad ayout.135 [3.4].070 [1.80] CT. NO pieces per reel CT. NO pieces per reel Ideal for use with most standard probes, clips and hookss Efficient, safe, board level testing Unique design provides exceptional strength and durability Simplifies testing on dense SMT circuit boards MINITURE SUPPIED ON TPE ND REE SPECIFICTIONS Contact Material:.015 (.38) Phosphor Bronze Contact Finish: Silver Plate Tape Material: 12mm wide; 4mm pitch; conductive polycarbonate carrier tape meets NSI/EI-481 standard CT. NO pieces per reel.080 [2.03] Ideal for use with standard probes, clips and hooks Efficient, safe, board level testing Unique design provides exceptional strength and durability Simplifies testing on dense SMT circuit boards SPECIFICTIONS Contact Material:.015 (.38) Phosphor Bronze Contact Finish: Silver Plate Tape Material: 12mm wide; 4mm pitch; conductive polycarbonate carrier tape meets NSI/EI-481 standard.150 [3.81].040 [1.02] CT. NO pieces per reel.150 [3.8].090 [2.29] COMPCT SUPPIED ON TPE ND REE.112 [2.8].040 [1.00].090 [2.30] Pad ayout.150 [3.80] MIN. Pad ayout.185 [4.7].080 [2.03] MIN..135 [3.4] SMT TEST POINTS CT. NO pieces per reel SM CIP Solder Connection with Strain Relief Insulated or Non-Insulated CT. NO pieces per reel IGTOR CIPS MEDIUM CIP Solder Connection with Strain Relief Insulated or Non-Insulated RGE CIP Solder Connection or Screw Connection (Barrel ccepts Wire or Standard Banana Plugs) Insulated or Non-Insulated.295 (7.5).335 (8.5).445 (11.3).750 (19.1) CT. INSUTOR NO. COOR 5033 NONE 5034 RED 5035 BCK 5036 GREEN 5037 YEOW 1.06 (27.0) JW SPRED.236 (6.0) max. MTERI: Clip: Steel, Nickel Plate Insulator: Vinyl CT. INSUTOR NO. COOR 5038 NONE 5039 RED 5040 BCK 1.40 (35.5) JW SPRED.236 (6.0) max. MTERI: Clip: Steel, Nickel Plate Insulator: Vinyl RoS COMPINT ~ ISO 9001 CERTIFIED CT. NO. INSUTOR COOR 5044 NONE 5045 RED 5046 BCK 5048 SCREW INSTED 1.97 (50.0) 5048 only JW SPRED.315 (8.0) max. MTERI: Clip: Steel, Nickel Plate Insulator: Vinyl 61

68 These easy-to-mount, multipurpose screw type terminals are a practical, low-cost alternative to PC screw type edge connectors, barrier blocks, terminal boards and terminal strips. Steadfast and easy to install, will accommodate solid or stranded wire, crimp type terminals or lugs. Multi-placement of these low-profile terminals make them ideally suited for high density packaging. Supplied unassembled or with screw installed and captivated. PRINCIP FETURES ow profile Stable, no-rock design with exclusive anti-rotational feature Easily mounts with four legs into pre-drilled or punched holes ccepts WG solid or stranded wire, crimp type terminals or lugs Ideally suited for high-density packaging vailable in horizontal or vertical mounting Space-saving and time saving Easy accessibility for PC board testing Binding screw is positioned above board level to avoid wicking during wave soldering Terminals are made of Brass with Tin Plate Supplied with a combination drive 6-32 binding head screw PC SCREW TERMINS COOR SEECTION: Select desired screw terminal and add color suffix to the screw terminal Cat. No. ORIZONT TYPE ED COOR SUFFIX RED -2 BCK -3 WITE -4 BUE -5 GREEN -6 YEOW -7 NICKE none CT. NO. COOR SUFFIX Ex: XXXX -X SCREW TERMINS SNP-IN PC MOUNT Color coded screws available (add color screw suffix to Cat. No.) 6-32 x.250 [6.3]. SCREW.280 [7.1].327 [8.3].295 [7.5].138 [3.5] CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated) 7773 SNP-IN PC MOUNT MINI 4-40 X.250 [6.3]. SCREW.180 [4.6].214 [5.4].250 [6.4].050 [1.3] (4) PS.452 [11.5].350 [8.9].200 [5.1].312 [7.9].512 [13.0].060 [1.52] (4) PS.197 [5.0].180 [4.6] SPECIFICTIONS Rated: 15 mps Terminal:.032 (.81) Brass, Matte Tin Plate Binding ead Screw: Brass, Nickel Plate.295 [7.5].197 [5.0].073 [1.85] (4) PS Color coded screws available (add color screw suffix to Cat. No.) SPECIFICTIONS Rated: 15 mps Terminal:.032 (.81) Brass, Matte Tin Plate Binding ead Screw: Brass, Nickel Plate.214 [5.4] 6-32 x.250 [6.3]. SCREW.280 [7.1].327 [8.3].295 [7.5] 6-32 x.250 [6.3]. SCREW.295 [7.5].125 [3.2].037 [1.0].130 [3.3].190 [4.9].138 [3.5].452 [11.5] [11.5] [7.9].512 [13.0].060 [1.52] (4) PS.197 [5.0] CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).412 [10.5].555 [14.1].060 [1.52] (4) PS PC MOUNT PC MOUNT Color coded screws available (add color screw suffix to Cat. No.) Color coded screws available (add color screw suffix to Cat. No.) CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled).062 [1.57] (4) PS CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).295 [7.5].073 [1.85] (4) PS VERTIC TYPE SNP-IN PC MOUNT Color coded screws available (add color screw suffix to Cat. No.) 6-32 x.250 [6.3]. SCREW.210 [5.4].276 [7.0].197 [5.0].310 [7.9].310 [7.9].440 [11.2].187 [4.8].060 [1.52] (4) PS SPECIFICTIONS Rated: 15 mps Terminal:.032 (.81) Brass, Matte Tin Plate Binding ead Screw: Brass, Nickel Plate.197 [5.0].276 [7.0] 6-32 x.250 [6.3]. SCREW.210 [5.4].276 [7.0].197 [5.0].310 [7.9].310 [7.9].440 [11.2].197 [5.0].060 [1.52] (4) PS 7701 PC MOUNT Color coded screws available (add color screw suffix to Cat. No.) CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).073 [1.85] (4) PS Color coded screws available (add color screw suffix to Cat. No.) CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated) 62 RoS COMPINT ~ ISO 9001 CERTIFIED

69 Color coded screws available (add color screw suffix to Cat. No.) 6-32 X.250 [6.3]. SCREW.312 [7.9].250 [6.3] CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).055 [1.4] (2) PS EXTENDED 6-32 x.250 [6.3]. SCREW.343 [8.7].187 [4.7].310 [7.9].310 [7.9] PC SCREW TERMINS OW PROFIE VERTIC TYPE SPECIFICTIONS Rated: 15 mps Terminal:.032 (.81) Brass, Matte Tin Plate Binding ead Screw: Brass, Nickel Plate.312 [7.9].067 [1.7] (2) PS VERTIC TYPE.276 [7.0] 6-32 x.250 [6.3]. SCREW.197 [5.0] SPECIFICTIONS Rated: 15 mps Terminal:.032 (.81) Brass, Mattte Tin Plate Binding ead Screw: Brass, Nickel Plate X.375 [9.5]. SCREW.134 [3.4].197 [5.0] CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).310 [7.9] EVY DUTY.310 [7.9].059 [1.5] (4) PS.375 [9.5].382 [9.7] Color coded screws available (add color screw suffix to Cat. No.).276 [7.0] [4.7].144 [3.7].062 [1.57] (4) PS PC MOUNT Color coded screws available (add color screw suffix to Cat. No.) Combination drive, binding head screw Color coded screws available (add color screw suffix to Cat. No.).276 [7.0] 6-32 x.250 [6.3]. SCREW [18.3] CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).197 [5.0] SPECIFICTIONS Rated: 30 mps Terminal:.032 (.81) Brass, Matte Tin Plate Binding ead Screw: Brass, Nickel Plate CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated) vailable for screw terminals where noted..060 [1.5] (6) PS.197 [5.0].507 [12.9].394 [10.0].197 [5.0].947 [24.1].060 [1.52] (4) PS.310 [7.9].210 [5.3] 30 MP - VERTIC PRINCIP FETURES Compact, heavy duty design Six snap-in legs for total stability Serrated top surface secures connection.250 [6.3].276 [7.0].394 [10.0].076 [1.93] (6) PS.197 [5.0] SPECIFICTIONS Rated: 30 mps Terminal:.045 (1.14) Brass, Matte Tin Plate Screw: Stainless Steel COOR CODED SCREW TERMIN SEECTION GUIDE Color Coded Screw Terminals provide: Quick identification Visibility for field service troubleshooting SPECIFICTIONS Combination Binding ead: Standard screw is Brass, Nickel Plate. For painted, color head, add suffix as shown..197 [5.0].276 [7.0].073 [1.85] (4) PS RoS COMPINT ~ ISO 9001 CERTIFIED.341 [8.7] CT. NO (No Screw Supplied) x.375 [9.5]. SCREW.425 [10.8] EVY DUTY.060 [1.5] (6) PS.205 [5.2].197 [5.0] CT. NO (Screw Supplied Unassembled) CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) 6-32 x.250 [6.3]. TRED COOR SEECTION: Select desired screw terminal and add color suffix to the screw terminal Cat. No. ED COOR SUFFIX RED -2 BCK -3 WITE -4 BUE -5 GREEN -6 YEOW -7 NICKE none.060 [1.5].470 [11.9].383 [9.7].209 [5.3].470 [11.9].453 [11.5].226 [5.7].410 [10.4].341 [8.7] [5.0].410 [10.4].073 [1.85] (4) PS.101 [2.6] (6) PS CT. NO. COOR SUFFIX Ex: XXXX -X Refer to page 133 for color screws only [5.2] SCREW TERMINS 63

70 6-32 SEMS SCREW SEMS SCREW TERMINS 15 MP SPECIFICTIONS Terminal:.032 (.81) Brass, Matte Tin Plate Screw & Washer: Steel, Nickel Plate 6-32 SEMS SCREW.187 [4.8].440 [11.2].440 [11.2].197 [5.0] SNP-IN PC MOUNT [1.52] [1.52] [7.0].197 (4) PS [7.0].197 [5.0] (4) PS [5.0] PC MOUNT CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated) CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated).280 [7.1] 6-32 SEMS SCREW.452 [11.5] SPECIFICTIONS Terminal:.032 (.81) Brass, Matte Tin Plate Screw & Washer: Steel, Nickel Plate.312 [7.9].512 [13.0] 6-32 SEMS SCREW.452 [11.5].312 [7.9].512 [13.0] SEMS SCREW TERMINS SNP-IN PC MOUNT SNP-IN PC MOUNT PC MOUNT.295 [7.5] 6-32 SEMS SCREW.276 [7.01].138 [3.5] CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated) 6-32 SEMS SCREW.276 [7.01] CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated) CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated).232 [5.9].718 [18.3].197 [5.0].060 [1.52].197 [5.00].134 [3.4].331 [8.4].059 [1.50] (4) PS.197 [5.0] SPECIFICTIONS Terminal:.032 (.81) Brass, Matte Tin Plate Screw & Washer: Steel, Nickel Plate SPECIFICTIONS Terminal:.032 (.81) Brass, Matte Tin Plate Screw & Washer: Steel, Nickel Plate.947 [24.1].060 [1.52] (4) PS 6-32 SEMS SCREW 6-32 SEMS SCREW.308 [7.8].295 [7.49].312 [7.9].450 [11.43] [1.52] (4) PS.197 [5.0].412 [10.5].555 [14.1].060 [1.52] (4) PS PC MOUNT CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated).250 [6.4].437 [11.1].055 [1.40] (2) PS PC MOUNT CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated) PC MOUNT CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated) 6-32 SEMS SCREW 30 MP.507 [12.9] SEMS Screw Terminals provide quick and secure attachment of wire leads. SEMS screw has captivated, free spining lock washer, eliminated twisting of wire when tightening lead to terminal. Washer will rise with head of screw when unscrewed..310 [7.9] SQURE.266 [6.8] SNP-IN PC MOUNT SPECIFICTIONS Terminal:.032 (.81) Brass, Matte Tin Plate Screw & Washer: Steel, Nickel Plate.276 [7.0].197 [5.0].394 [10.0].460 [11.7].060 [1.52] (6) PS 6-32 TRED 64 CT. NO SEMS (Screw Supplied Unassembled) CT. NO SEMS (Screw Installed & Captivated) SPECIFICTIONS Screw & Washer: Steel, Nickel Plate RoS COMPINT ~ ISO 9001 CERTIFIED CT. NO (SEMS Screw Only)

71 PRINCIP FETURES Stable, no-rock design with exclusive anti-rotational feature Easily mounts with four legs into pre-drilled or punched holes ccepts WG solid or stranded wire, crimp type terminals or lugs Ideally suited for high-density packaging Easy accessibility for PC board testing Binding screw is positioned above board level to avoid wicking during wave soldering METRIC PC SCREW TERMINS These easy-to-mount, multipurpose screw type terminals are a practical, low-cost alternative to PC screw type edge connectors, barrier blocks, terminal boards and terminal strips. Steadfast and easy to install, will accommodate solid or stranded wire, crimp type terminals or lugs. Multi- placement of these low-profile terminals make them ideally suited for high density packaging. Supplied unassembled or with screw installed and captivated. COOR SEECTION: Select desired screw terminal and add color suffix to the screw terminal Cat. No. ORIZONT TYPE ED COOR SUFFIX RED -2 BCK -3 WITE -4 BUE -5 GREEN -6 YEOW -7 NICKE none Refer to page 133 for color screws only 6.00 ONG SCREW SPECIFICTIONS Rated: 15 mps Terminal:.80 Brass, Matte Tin Plate Screw: Brass, Nickel Plate 6.00 ONG SCREW SNP-IN PC MOUNT SNP-IN PC MOUNT ONG SCREW M3 TRED M4 TRED CT. NO. CT. NO No Screw Supplied * Screw Supplied Unassembled * Screw Installed & Captivated 7794 *vailable with color Coded Screws M3 TRED M4 TRED CT. NO. CT. NO No Screw Supplied * Screw Supplied Unassembled * Screw Installed & Captivated 7797 *vailable with color Coded Screws M4 x SCREW M OE (4) PS Color coded screws available (add color screw suffix to Cat. No.) VERTIC TYPE SPECIFICTIONS Rated: 15 mps Terminal:.80 Brass, Matte Tin Plate Screw: Brass, Nickel Plate OE (4) PS Color coded screws available (add color screw suffix to Cat. No.) 30 MP - VERTIC TYPE ONG SCREW M PC MOUNT M3 TRED M4 TRED CT. NO. CT. NO No Screw Supplied * Screw Supplied Unassembled * Screw Installed & Captivated 7766 *vailable with color Coded Screws PC MOUNT M3 TRED M4 TRED CT. NO. CT. NO No Screw Supplied * Screw Supplied Unassembled * Screw Installed & Captivated 7769 *vailable with color Coded Screws METRIC SCREW TERMINS 7.87 PRINCIP FETURES Compact, heavy duty design Six snap-in legs for total stability Serrated top surface secures connection M5 x SCREW SNP-IN PC MOUNT SNP-IN PC MOUNT 7.00 SPECIFICTIONS Rated: 30 mps Terminal:.80 Brass, Matte Tin Plate Screw: Brass, Nickel Plate CT. NO No Screw Supplied 7799 Screw Supplied Unassembled 7800 Screw Installed & Captivated Color coded screws available (add color screw suffix to Cat. No.) OE (6) PS SPECIFICTIONS Rated: 30 mps Terminal: 1.14 Brass, Matte Tin Plate Screw: Brass, Nickel Plate RoS COMPINT ~ ISO 9001 CERTIFIED 1.52 CT. NO No Screw Supplied 7808 Screw Supplied Unassembled OE (6) PS

72 TRU OE MINI BINDING POSTS WIRE CONTCT.157 [4.0] SQURE M2.5 x.156 [4.0]. SCREW M2.5 X 4.0. SCREW.158 [4.0] SQURE SPECIFICTIONS Terminal: Brass, Tin Plate Screw: Steel, Zinc Plate Mounting ole:.047 (1.2) Current Rating: 15 MP.102 [2.6].110 [2.8] OE TRU.197 [5.0].187 [4.8].039 [1.00].197 [5.0] SPECIFICTIONS Terminal: Brass, Tin Plate Screw: Steel, Zinc Plate Contact: Phoshorus Bronze, Tin Plate Mounting ole:.047 (1.2) Current Rating: 15 MP.192 [4.9].105 [2.7] TRU. CONTCT.039 [1.0] SCREW TERMINS CT. NO (Screw Installed) [9.5] 6-32 x.250 [6.3]. SCREW.328 [8.4] SPECIFICTIONS Rated: 15 mps Terminal:.032 (.81) Brass, Matte Tin Plate Screw: Combination drive, Stainless Steel CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated) These sturdy, low cost screw terminals, feature an anti-rotation tab for use with spade terminals. They are available with the screw installed and captivated, the screw unassembled or without a screw..156 [4.0].187 [4.8].094 [2.4].062 [1.57].100 [2.6] CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed) EVY DUTY SCREW TERMINS - 30 MP.437 [11.1] PRINCIPE FETURES Easy to connect using solid or stranded wire, crimp lugs or terminals nti-rotation tab for use with spade terminals Supplied with screw installed and captivated, with screw unassembled, or without screw Stainless steel screw will not wick.340 [8.7].187 [4.7].110 [2.8] CT. NO (Screw Installed) OW PROFIE SCREW TERMINS 8-32 x.375 [9.5]. SCREW.437 [11.1].115 [2.9] SPECIFICTIONS Rated: 15 mps Terminal:.064 (1.6) Brass, Matte Tin Plate Screw: Brass, Nickel Plate These heavy duty terminals are available with the screw installed or unassembled, and feature easy access to connect solid or stranded wire, crimp type lugs or terminals. PRINCIPE FETURES nti-rotation tab for use with spade terminals Below the board notched leg, to facilitate mechanical and solder connections Easy to connect using solid or stranded wire, crimp lugs or terminals vailable with screw installed, unassembled, or without screw.375 [9.5].109 [2.8].297 [7.6].531 [13.5].375 [9.5].406 [10.3] [3.6].210 [5.3] [12.0] [3.2] [1.96] [10.3].375 [9.6] x.250 [6.3]. SCREW.187 [4.8] SPECIFICTIONS Rated: 30 mps Terminal:.062 (1.6) Brass, Matte Tin Plate Screw: Combination drive, Stainless Steel CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed & Captivated).156 [4.0].093 [2.36].210 [5.3].472 [12.0].142 [3.6].075 [1.9] SPECIFICTIONS Rated: 30 mps Terminal:.064 (1.6) Brass, Matte Tin Plate Screw: Steel, Nickel Plate x.375 [9.5]. SCREW CT. NO (No Screw Supplied) CT. NO (Screw Supplied Unassembled) CT. NO (Screw Installed) RoS COMPINT ~ ISO 9001 CERTIFIED.109 [2.8] [7.6] [11.1].531 [13.5].115 [2.9].406 [10.3].140 [3.6].470 [12.0].210 [5.3].126 [3.2].077 [1.96]

73 SCREW TERMINS OFFSET EG STRIGT EG.375 [9.5].100 [2.6].375 [9.5].100 [2.6] SPECIFICTIONS Terminal:.032 (.81) Steel, Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) Rated: 15 mps CT. NO [4.0].562 [14.3].062 [1.57].093 [2.36] 6-32 x.375 [9.5]. SCREW.093 [2.36].203 [5.2].187 [4.8].312 [7.9].110 [2.8].330 [8.4].210 [5.4].280 [7.1].156 [4.0].562 [14.3].062 [1.57] 6-32 x.375 [9.5]. SCREW.093 [2.36].093 [2.36].203 [5.2].187 [4.8].312 [7.9] SPECIFICTIONS Terminal:.032 (.81) Steel, Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) Rated: 15 mps CT. NO SODER TB QUICK FIT.375 [9.5].093 [2.35].187 [4.8].100 [2.6].156 [3.96].375 [9.5].100 [2.54] (2) PS 6-32 x.375 [9.5]. SCREW.093 [2.36] CT. NO SODER.562 [14.3].156 [4.0].093 [2.36] 6-32 SCREW.375 [9.5].308 [7.8] SPECIFICTIONS Terminal:.020 (.51) Steel, Tin Plate Screw: Steel, Zinc Plate, (Screw Installed & Captivated) Rated: 15 mps.562 [14.3].100 [2.5].062 [1.57] SPECIFICTIONS Terminal:.032 (.81) Steel,Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) Rated: 15 mps.375 [9.5].308 [7.8] 6-32 x.312 [7.9]. SCREW.093 [2.36].203 [5.2].312 [7.9].312 [7.9] SQR..375 [9.5].308 [7.8].937 [23.8].562 [14.3].333 [8.5].110 [2.8].187 [4.7] 6-32 SCREW.375 [9.5].308 [7.8].100 [2.54].187 [4.7] SPECIFICTIONS Terminal:.020 (.51) Steel, Tin Plate Screw: Steel, Zinc Plate, (Screw Installed & Captivated) Rated: 15 mps CT. NO CT. NO [7.11] 125 [3.17].563 [14.30].125 [3.18].330 [8.38].270 [6.90].110 [2.79] QUICK-FIT.062 [1.57] BINDING POST TERMINS (RIVET TYPE) SPECIFICTIONS Terminal: Brass, Tin Plate Screw: Steel, Zinc Plate (Screw Supplied Unassembled) SPECIFICTIONS Terminal:.032 (.81) Brass, Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) Rated: 15 mps.072 [1.83] (4) PS.144 [3.7].203 [5.16].312 [7.92] 6-32 TRED.216 [5.5].329 [8.4].291 [7.4].108 [2.7].365 [9.3].217 [5.5].064 [1.6] (4) PS..250 [6.35] QUICK-FIT.250 [6.4].070 [1.8].178 [4.5] CT. NO Supplied Unassembled SPECIFICTIONS Material:.032 (.81) Brass, NIckel Plate Rated: 15 mps CT. NO (No Screw Supplied) CT. NO (Screw Installed) SCREW TERMINS [7.2] BODY.312 [7.9] BODY.343 [8.7] BODY 4-40 x.187 [4.7]. SCREW 6-32 x.187 [4.7] SCREW 8-32 x.187 [4.7]. SCREW.141 [3.6].187 [4.8].140 [3.6].171 [4.4].312 [7.9] Mounting ole:.220 (5.6) Mounting ole:.225 (5.7) Mounting ole:.255 (6.5) CT. NO [3.6].216 [5.5] KNUR FOR.093 (2.38) BORD CT. NO FOR.093 (2.38) BORD CT. NO FOR.125 (3.2) BORD.172 [4.4].220 [5.6] KNUR RoS COMPINT ~ ISO 9001 CERTIFIED.204 [5.2].145 [3.7] KNUR 67

74 SPCERS & STNDOFFS Designed for reliability and close tolerance dimensions our diverse selection of spacers and standoffs provide solutions for any design requirements. vailable in a wide range of materials and styles, some of the applications include: Mechanical support Component-to-board mounting requirements Board-to-Board PCB mounting Board-to-Chassis device mounting Eliminate the cost and bulk of backplanes and card cages PC/104 & PC/104 plus module mounting igh Temperature conditions Commercial, Military & Industrial environments Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.

75 SPCERS & STNDOFFS SECTION CONTENTS SSORTMENT/MOUNT KITS SPCERS Clear ole Clear ole Threaded Economy (Rolled) Metric Retaining Spacer Nylon support Swage / Force Fit PC Stacking MODED PC SPCERS TREDED STNDOFFS dhesive Ceramic ock in - ock in Female-Female ock in - Releasable inged Releasable Male-Female Support Metric Threaded Swage / Force Fit

76 ME/FEME TREDED STNDOFFS TRED T TRED T SIZE EXTERN INTERN (4.7).250 (6.4) (6.4).375 (9.5) (9.5).375 (9.5) TRED pplication Note: For PC/104 applications use length.600 (15.3) 4-40 Thread COICE OF: Stainless: STM 581/582 Brass: STM-B16 luminum: STM B211 Plating: Nickel (QQ-N-290) Plating: Clear Iridite (Mil-C-5541) EX ME/ FEME STNDOFFS TRED STINESS STEE BRSS UMINUM ENGT CT NO. CT NO. CT NO..250 (6.4)*** (9.5) (12.7) (15.2)* (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) (34.9) (38.1) (41.3) (44.5) (50.8) *PC/104 Standard ength ***Internal Thread.130 (3.3)/.150 (3.8) Deep PC 104 MOUNTING KITS Designed to ease the assembly of new modules and multi-board stacks. Each kit includes all the hardware that is required to mount a single-board SCREW PC104 STNDOFF 4-40 EX NUT Complete Kit Includes Four (4) each: CT. NO. Kit Description Standoff Screw Nut Nylon Stainless Steel luminum * 9600* Brass * 9600* * luminum and brass kits supplied with steel hardware TRED STINESS STEE BRSS UMINUM ENGT CT NO. CT NO. CT NO..250 (6.4)*** (9.5)** (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) (34.9) (38.1) (41.3) (44.5) (50.8) ** Internal Thread.250 (6.4) Deep *** Internal Thread.130 (3.3)/.150 (3.8) Deep.375 [9.5].600 [15.2].187 [4.7] TRED RoS COMPINT ~ ISO 9001 CERTIFIED TRED TRED SIZE ENGT CT. NO. CT. NO. CT. NO..250 (6.4)*** (9.5) **.500 (12.7) (15.2)* (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) (34.9) (38.1) (41.3) (44.5) (50.8) * PC/104 Standard ength ** Internal Thread.250 (6.4) Deep *** Internal Thread.130 (3.3)/.150 (3.8) Deep 8-32 TRED STINESS STEE BRSS UMINUM ENGT CT NO. CT NO. CT NO..250 (6.4)*** (9.5)** (12.7) (15.9) (19.1) (22.2) (25.4) (28.6) (31.8) (34.9) (38.1) (41.3) (44.5) (50.8) (63.5) (76.2) ** Internal Thread.250 (6.4) Deep *** Internal Thread.130 (3.3)/.150 (3.8) Deep NYON STNDOFFS MTERI: Nylon 6/6 ME/FEME STNDOFFS pplication Note: For PC/104 applications use CT. NO TRED SIZE (4.7) (6.4) (9.5)

77 FEME TREDED STNDOFFS EX ROUND TRED TRED EX O.D. COICE OF: Stainless: STM 581/582 Brass: per STM-B16 luminum: STM B211 Nylon V2: 6/6 U Rated 94V-2 Phenolic: PBE Grade Natural Plating: Zinc STM B633 Plating: Clear Iridite Finish Nylon V0: 6/6 U Rated 94V-0 Color Phenolic EX ROUND EX NYON V2 NYON V0 STINESS BRSS UMINUM BRSS UMINUM PENOIC O.D. CT. NO. CT. NO. CT. NO. CT. NO. CT. NO. ENGT CT. NO. CT. NO. CT. NO..156 (3.9).187 (4.7).250 (6.3).250 (6.3).250 (6.3).312 (7.9) NOTE: ll standoffs over (25.4) are tapped.375 (9.5) min. both ends, except 4-40 standoffs which are tapped.250 (6.4) min TRED (4.7) B 1797B.250 (6.4) 1802B 1801B 1798C 1797C.312 (7.9) 1802C 1801C 1798D 1797D.375 (9.5) 1802D 1801D 4-40 TRED (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) B (25.4) 1657B (6.4) B 8440B B (9.5) 1547B C 8440C 1921B 1450C (12.7) 1547C F 8440D (15.9) D 8440E 1921C 1450D (19.1) 1547D G 8440F (22.2) E 8440G 1921D 1450E (25.4) 1547E E (38.1) F (50.8) TRED (6.4) B 8441B B (9.5) 1548B C 8441C 1922B 1451C (12.7) 1548C F 8441D 1451D (15.9) 1548D D 8441E 1922C 1451E (19.1) 1548E G 8441F (22.2) E 8441G 1922D (25.4) 1548F (31.8) E (38.1) (44.5) F (50.8) (57.2) (63.5) TRED (6.4) B 8442B B (9.5) 1692B C 8442C 1923B 1474C (12.7) 1692C F 8442D (15.9) D 8442E 1923C 1474D (19.1) 1692D G 8442F (22.2) E 8442G 1923D 1474E (25.4) 1692E E (38.1) F (50.8) TRED (9.5) B 1822B 1821B.500 (12.7) 3499B 3500B C 1822C 1821C.625 (15.9) 3499C 3500C 1475D 1822D 1821D.750 (19.1) 3499D 3500D F 1822F 1821F (25.4) 3499F 3500F 471 RoS COMPINT ~ ISO 9001 CERTIFIED.156 (3.9).187 (4.7).250 (6.3).250 (6.3).250 (6.3).312 (7.9) TREDED STNDOFFS 71

78 METRIC STNDOFFS METRIC NYON STNDOFFS Material: Nylon 6/6, U Rated 94V-2 ME/FEME FEME ME/FEME FEME METRIC STNDOFFS ND SPCERS TRED T EX TRED TRED SIZE T M M M TRED COICE OF: Stainless: STM 581/582 Brass: STM-B16 luminum: STM B211 Plating: Nickel Plating: Clear Iridite (QQ-N-290) (Mil-C-5541) ME/FEME FEME STINESS BRSS UMINUM CT. NO. CT. NO. CT. NO. STINESS BRSS UMINUM CT. NO. CT. NO. CT. NO. 4.5 EX (M2.5 TRED) EX (M3 TRED) EX (M3 TRED) EX (M4 TRED) ** 24325** 24349** * 24326* 24350* * Internal Thread: 8.0mm deep ** Internal Thread: 6.0mm deep Note: Female standoffs longer than 19mm may be tapped from both ends EX TRED TRED EX TRED SIZE M3 8.0 M4 9.5 ME/FEME FEME CT. NO. CT. NO. 5.0 EX (M3 TRED) EX (M4 TRED) One end locks into chassis, the other end locks into the PC Board. 4,83 3,18 Material: Nylon 6/6, U Rated 94V-0 FOR 4,00 MOUNTING OE FOR 1,57 TICK PCB FOR 1,57 CSSIS FOR 4,00 MOUNTING OE 6,00 Choice of: Steel, Zinc Plate Nylon: 6/6, U Rated 94V-2 See page 132 for metric nuts Note: Female standoffs longer than 19mm may be tapped from both ends TRED METRIC NYON OCK-IN SUPPORT METRIC SCREWS TRED EX CT. NO. DIM STEE NYON 6/6 CT. NO. CT. NO. M2.5 TRED M3 TRED M4 TRED RoS COMPINT ~ ISO 9001 CERTIFIED

79 SWGE TREDED STNDOFFS FORCE-FIT STNDOFFS ROUND EX ROUND broaching-type fastener/standoff for installation in panels and circuit boards.060 (1.52) and thicker made of plastic and other non-ductile materials. vailable threaded or with clearance holes. Easy to install, presses into punched or drilled holes. O.D. EX MTERI: Stainless Steel per STM-581/582 TRED.105 (2.7) TRED.105 (2.7) MOUNTING OES:.147 (3.7) hole for (4.2) hole for (5.4) hole for 6-32 TOERNCE ON MOUNTING OES: +.003/-.000 O.D. O.D..D..D. MTERI: Brass, STM-B16, Nickel Plate (QQ-N-290) For.062 (1.52) thick boards ROUND.D. SNK EX CT. NO. EIGT BOVE PNE DIMETER CT NO TRED.156 (4.0) O.D (3.2).125 (3.2) (4.7).125 (3.2) (6.4).125 (3.2) (9.5).125 (3.2) TRED.187 (4.7) O.D (3.2).139 (3.5) (4.7).139 (3.5) (6.4).139 (3.5) (9.5).139 (3.5) (12.7).139 (3.5) TRED.250 (6.4) O.D (3.2).187 (4.7) (4.7).187 (4.7) (6.4).187 (4.7) (9.5).187 (4.7) (12.7).187 (4.7) (15.9).187 (4.7) (19.1).187 (4.7) (22.2).187 (4.7) (25.4).187 (4.7) TRED.250 (6.4) O.D. 1560B.125 (3.2).187 (4.7) (4.7).187 (4.7) (6.4).187 (4.7) B.375 (9.5).187 (4.7) (12.7).187 (4.7) (15.9).187 (4.7) (19.1).187 (4.7) (22.2).187 (4.7) (25.4).187 (4.7) SWGE CER OE SPCERS.250 [6.4] C.060 [1.52] MX. Threaded.060 [1.52] MX. Clear ole TREDED CT. NO. ENGT O.D. TRED (1.7).219 (5.6).165 (4.2) (1.7).219 (5.6).184 (4.7) (3.2).219 (5.6).184 (4.7) (6.4).219 (5.6).184 (4.7) (9.5).219 (5.6).184 (4.7) 4865 *.500 (12.7).219 (5.6).184 (4.7) (1.7).281 (7.1).231 (5.9) (3.2).281 (7.1).231 (5.9) (6.4).281 (7.1).231 (5.9) (9.5).281 (7.1).231 (5.9) 4870 *.500 (12.7).281 (7.1).231 (.59) *Thread depth.375 (9.5) CER OE CT. NO. ENGT O.D. OE (1.7).219 (5.6).184 (4.7) (3.2).219 (5.6).184 (4.7) (6.4).219 (5.6).184 (4.7).116 (2.9) (9.5).219 (5.6).184 (4.7) For # (12.7).219 (5.6).184 (4.7) (1.7).281 (7.1).231 (5.9) (3.2).281 (7.1).231 (5.9) (6.4).281 (7.1).231 (5.9).143 (3.6) (9.5).281 (7.1).231 (5.9) For # (12.7).281 (7.1).231 (5.9) SWGE STKING TOOS Precision made staking tool kits are made from.250 (6.4) diameter heat treated steel, zinc plated. Each kit includes the correct swage top staking tool anvil to create a professional appearance. These tools may be used with an arbor press or hand tapped. SWGE/FORCE FIT STNDOFFS.109 [2.8].187 [4.8] MTERI: Brass, STM-B16, Nickel Plate (QQ-N-290) For.062 (1.52) thick boards CT. NO. EIGT BOVE PNE C OE (3.2) (6.4).120 (3.0) (9.5) For # (12.7) (3.2) (6.4).140 (3.5) (9.5) For # (12.7) CT. NO. STNDOFF TRED OE SIZE T (4.0) 2-56 T (4.7) 4-40 T (6.4) 4-40 T (6.4) (3.0) RoS COMPINT ~ ISO 9001 CERTIFIED 73

80 SPCERS & STNDOFFS 74 CER BRSS UMINUM OE O.D. ENGT CT. NO. CT. NO..125 (3.2) (6.4) (9.5) 1454B (12.7) 1454C (3.0).250 (6.4).625 (15.9) For #4.750 (19.1) 1454D (22.2) (25.4) 1454E (38.1) (50.8) (3.2) (6.4) (9.5) 1457B (12.7) 1457C (3.5).250 (6.4).625 (15.9) For #6.750 (19.1) 1457D (22.2) (25.4) 1457E (38.1) (50.8) (3.2) (6.4) (9.5) (12.7) (4.3).250 (6.4).625 (15.9) For #8.750 (19.1) (22.2) (25.4) (38.1) (50.8) (6.4) (9.5) (12.7) (15.9) (5.0).312 (7.9).750 (19.1) For # (22.2) (25.4) (38.1) (50.8) Made of flat strip aluminum and rolled on precision equipment. ssures maximum bearing surface, square ends. luminum: per QQ--250/8b SPCER FOR I.D. O.D. # (3.0).167 (4.3) # (3.8).193 (4.9) # (4.5).232 (5.9) Ideal for very high temperature conditions Commercial and military types available Military types meet MI-1-010, N # clearly marked O.D. TRED MTERI: Grade 5 Ceramic D D ROUND CER OE SPCERS MTERI: Brass: STM-B16, Nickel Plate (QQ-N-290) luminum: STM B211, Clear Iridite (MI-C-5541) Nylon: Nylon 6/6, U Rated 94V-2 Phenolic: PBE Grade Natural Color Phenolic BRSS NYON UMINUM ECONOMY SPCERS Tight Joint on Outside Diameter O.D. I.D. O.D. UMINUM OE CERMIC STNDOFFS Exceptional strength in compression and tension Withstands very high voltage without flashover Special sizes available upon request SCREW CERNCE # 4 # 6 # 8 ENGT CT. NO. CT. NO. CT. NO..187 (4.7) (6.4) (7.9) (9.5) (11.1) (12.7) (15.9) COMMERCI CT. T D NO. ENGT O.D. TRED DEPT (6.4).250 (6.4) 6-32 TRU (12.7).250 (6.4) (4.0) (9.5).375 (9.5) (4.0) (12.7).375 (9.5) (4.0) (12.7).500 (12.7) (3.6) (19.1).500 (12.7) (6.4) (25.4).500 (12.7) (9.5) (38.1).500 (12.7) (14.3) (63.5).500 (12.7) (12.7) (63.5).750 (19.1) 1/ (19.1) ( (19.1) 1/ (19.1) PENOIC RoS COMPINT ~ ISO 9001 CERTIFIED NYON PENOIC CER CT. NO. CT. NO. ENGT O.D. OE (3.2) (6.4) (9.5) (12.7) (15.9).250 (6.4).120 (3.0) (19.1) For # (22.2) (25.4) (38.1) (50.8) (3.2) (6.4) (9.5) (12.7) (15.9).250 (6.4).140 (3.5) (19.1) For # (22.2) (25.4) (38.1) (50.8) (3.2) (6.4) (9.5) (12.7) (15.9).250 (6.4).171 (4.3) (19.1) For # (22.2) (25.4) (38.1) (50.8) (6.4) (9.5) (12.7) (15.9) (19.1).312 (7.9).196 (5.0) (22.2) For # (25.4) (38.1) (50.8) SCREW CERNCE # 4 # 6 # 8 ENGT CT. NO. CT. NO. CT. NO..750 (19.1) (22.2) (25.4) (31.8) (38.1) (44.5) (50.8) 438 MIITRY CT. T D NO. ENGT O.D. TRED DEPT N # (12.7).375 (9.5) (4.0) N523W (15.9).375 (9.5) (6.4) N523W (15.9).500 (12.7) (4.7) N523W (19.1).375 (9.5) (6.4) N523W (19.1).500 (12.7) (6.4) N523W (25.4).375 (9.5) (9.5) N523W (25.4).500 (12.7) (9.5) N523W (25.4).750 (19.1) (9.5) N523W (31.8).375 (9.5) (9.5) N523W (31.8).500 (12.7) (9.5) N523W (31.8) (25.4) 1/ (11.1) N523W (38.1).375 (9.5) (9.5) N523W (38.1).500 (12.7) (9.5) N523W (38.1).750 (19.1) (9.5) N523W (38.1) (25.4) 1/ (12.7) N523W (50.8).375 (9.5) (9.5) N523W (50.8).500 (12.7) (9.5) N523W (50.8).750 (19.1) (9.5) N523W03-016

81 Similar to our standard spacers, but with a specially configured I.D. designed to grip the outside of the screw shank. The spacer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and spacer, to reduce final assembly cost. NYON RETINING SPCERS CER OE OD CT..156 (3.9) Clear ole for #4 Screw NO. ENGT O.D. I.D (3.2) (6.4) (9.5) (12.7) (15.9) (6.4) (2.6) (19.1) (22.2) (25.4) FEME/FEME ME/FEME ME/ME ID CT..198 (5.0) Clear ole for #6 Screw NO. ENGT O.D. I.D (3.2) (6.4) (9.5) (12.7) (15.9) (7.9) (3.3) (19.1) (22.2) (25.4) INGED STNDOFFS pplications unlimited Time saving Space saving Interconnect circuits or services without danger of shorting MTERI: Brass, STM-B16. Zinc Plate and Yellow Chromate CT..240 (6.1) Clear ole for #8 Screw NO. ENGT O.D. I.D (3.2) (6.4) (9.5) (12.7) (15.9) (9.5) (3.8) (19.1) (22.2) (25.4) CT. D T NO. ENGT U P DIMETER TRED (19.1).172 (4.4).375 (9.5) (25.4).250 (6.4).625 (15.9).187 (4.7) (31.8).250 (6.4).625 (15.9) (19.1).172 (4.4).375 (9.5) (25.4).250 (6.4).625 (15.9).250 (6.4) (31.8).250 (6.4).625 (15.9) (19.1).172 (4.4).375 (9.5) (25.4).250 (6.4).625 (15.9).250 (6.4) (31.8).250 (6.4).625 (15.9) CT. D T NO. ENGT S U DIMETER TRED (15.9).250 (6.4).172 (4.4) (22.2).250 (6.4).250 (6.4).187 (4.7) (15.9).312 (7.9).172 (4.4) (22.2).312 (7.9).250 (6.4).250 (6.4) (15.9).312 (7.9).172 (4.4) (22.2).312 (7.9).250 (6.4).250 (6.4) 8-32 CT..277 (7.0) Clear ole for #10 Screw NO. ENGT O.D. I.D (3.2) (6.4) (9.5) (12.7) (15.9) (12.7) (4.5) (19.1) (22.2) (25.4).250 [6.4] D P T T D D U U U S RETINING SPCERS & INGED STNDOFFS S 90 CT. NO. ENGT S P D DIMETER T TRED (12.2).250 (6.4).250 (6.4).187 (4.7) (12.2).312 (7.9).250 (6.4).250 (6.4) (12.2).312 (7.9).250 (6.4).250 (6.4) 8-32 P T S RoS COMPINT ~ ISO 9001 CERTIFIED 75

82 INSUTED PC SPCER/SUPPORTS Board will be electrically insulated, eliminates need for insulating washers No tool required for installation Easy snap-in assembly One pieces design eliminates the need for additional screws and nuts Fits snug onto board ccommodates varying board thicknesses Flame retardant.156 (4.0) SIMINE TENSION-FIT.156 (4.0) One end permanently attaches to.070 (1.78) max. thick chassis Other end tension fits to.062 (1.57) max. thick PC board Board is easily releasable for repairs or upgrades ow insertion force SIMINE OCK-IN One end permanently attaches to.070 (1.78) max. thick chassis Other end permanently attaches to.062 (1.57) max. thick PC board ow insertion force Small footprint frees up board space. INSUTED PC SPCERS/SUPPORTS.187 (4.8).400 [10.2] FOR.187 [4.8] MOUNTING OE MTERI: Nylon 6/6, U Rated 94V (4.0) FOR.156 [4.0] MOUNTING OE FOR.062 [1.57] TICK PCB.546 [13.9].203 [5.2].275 [7.0] CSSIS.070 [1.78] MX. STURDY TENSION-FIT CT. NO. ENGT (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) One end permanently attaches to.031(.79) (2.0) thick chassis Other end tension fits to.062 (1.57) max thick PC board Board is easily releasable for repairs or upgrades Sturdy support due to high contact area.400 [10.2] FOR.156 [4.0] MOUNTING OE FOR.062 [1.57] TICK PCB.280 [7.1].187 (4.8) CT..156 (4.0) NO. ENGT.562 [14.3] (4.7) FOR.062 [1.57] CSSIS (6.4) (9.5) (12.7).218 [5.6] [2.6] FOR.187 [4.8] MOUNTING OE (15.9) (19.1) MTERI: Nylon 6/6, U Rated 94V (22.2) MTERI: Nylon 6/6, U Rated 94V (4.0) STURDY OCK-IN REESE.125 (3.2) ocks onto.062 (1.57) thick PC board Board is positively locked until manually released Board is easily releasable for repairs or upgrades Sturdy support due to high contact area with chassis.187 (4.8).350 [8.9] FOR.187 [4.8] MOUNTING OE STURDY OCK-IN Both ends permanently attaches to.031 (.79) (2.0) thick chassis or board Sturdy support due to high contact area.218 [5.6] FOR.156 [4.0] MOUNTING OE.546 [13.9].203 [5.2] MTERI: Nylon 6/6, U Rated 94V (4.0) FOR.156 [4.0] MOUNTING OE FOR.062 [1.57] TICK PCB FOR.156 [4.0] MOUNTING OE FOR.062 [1.57] TICK PCB.562 [14.3] FOR.062 [1.57] CSSIS.275 [7.0] CSSIS.070 [1.78] MX. SIMINE OCK-IN REESE.280 [7.1] ocks onto.062 (1.57) thick PC board Board is positively locked until manually unlocked Board is easily releasable for repairs or upgrades Compact design uses smaller mounting holes CT. NO. ENGT 1927B.250 (6.4) 1928B.375 (9.5) 1929B.500 (12.7) 1930B.625 (15.9) 1931B.750 (19.1) 1932B.875 (22.2) 1933B (25.4) CT. NO. ENGT (4.7) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) FOR.156 [4.0] MOUNTING OE.280 [7.1] FOR MOUNTING OE CT..400 [10.2] FOR.062 [1.57] NO. ENGT TICK PCB.343 [8.7].187 (4.8) (4.7).562 [14.3] (6.4).125 (3.2) FOR.062 [1.57] (9.5) CSSIS (12.7).218 [5.6] (15.9).156 [4.0] 8812 FOR.187 [4.8].750 (19.1) FOR MOUNTING OE (22.2) MOUNTING OE MTERI: Nylon 6/6, U Rated 94V (25.4) MTERI: Nylon 6/6, U Rated 94V [9.5] FOR.062 [1.57] TICK PCB FOR.062 [1.57] CSSIS.171 [4.4] CT. NO. ENGT (4.7) (6.4) (9.5) (12.7) (15.9) 76 RoS COMPINT ~ ISO 9001 CERTIFIED

83 INSUTED PC SPCERS/SUPPORTS Board will be electrically insulated, eliminates need for insulating washers Easy snap-in assembly No tool required for installation Designed for.062 (1.57) thick boards One piece design eliminates the need for additional screws and nuts Slim design frees up board space.125 (3.2) TENSION-FIT.100 (2.6) ESY OCK-IN One end permanently attaches to chassis Other end secures board with tension fit. Board easily releasable for repairs or upgrades Both ends permanently attach to chassis and board Teardrop style mounting end eases assembly ow protrusion above board and under chassis O.D. FOR.062 [1.57] TICK PCB I.D. Both ends permanently attach to chassis and board Secure mounting end design allows for taller spacing TRU OE SPCERS Base has larger surface area. Will not deform under heavy pre-load. One end attaches to chassis with screw or tapped hole Other end snap locks onto.062 (1.6) board Board is releasable for easy repair or upgrades RoS COMPINT ~ ISO 9001 CERTIFIED FOR.100 [2.6] MOUNTING OE.150 [3.8] CT. NO. ENGT.150 [3.8].125 (3.2) (3.2).100 (2.6) FOR.062 [1.57] (4.7).140 [3.6] TICK CSSIS (6.4) (9.5).150 [3.8] FOR (12.7) MOUNTING OE (15.9) (19.1) (22.2) MTERI: Nylon 6/6, U Rated 94V (25.4) MTERI: Nylon 6/6, U Rated 94V (3.2).125 (3.2).140 [3.6].140 [3.6] FOR MOUNTING OE FOR.062 [1.57] TICK PCB FOR MOUNTING OE OCK-IN FOR.062 [1.57] TICK PCB FOR.062 [1.57] TICK CSSIS FOR MOUNTING OE MTERI: Nylon 6/6, U Rated 94V-0 MTERI: Nylon 6/6, U Rated 94V [4.6].180 [4.6] CT. NO. ENGT (3.2) (4.7) (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) One end locks into panel. Clear hole designs for #4, #6 or #8 screw. CT. Outside Inside Mounting Screw NO. ENGT Diameter Diameter ole Size (3.2) (4.7) (6.4) # (9.5) (6.6) (3.2) (4.7) (12.7) (15.9) (6.4) (9.5) # (12.7) (7.1) (3.9) (5.9) (15.9) (6.4) (9.5) # (12.7) (7.1) (4.3) (5.9) (15.9) I.D..156 (4.0) FOR.062 [1.57] TICK PCB O.D. TRED FOR.062 [1.57] TICK PCB FOR.062 [1.57] TICK CSSIS FOR.100 [2.6] MOUNTING OE.312 [7.9] EX. FOR.062 [1.57] TICK PCB MTERI: Nylon 6/6, U Rated 94V-0 TREDED 8-32 TRED.250 [6.4].400 [10.2].171 [4.4] STCKING SPCERS Spacers can be stacked for multiple level PC board applications Self-aligning CT. Outside Inside Mounting Screw NO. ENGT Diameter Diameter ole Size (3.2) (4.7) (6.4) # (9.5) (6.6) (3.2) (4.7) (12.7) (15.9) (6.4) (9.5) # (12.7) (7.9) (3.9) (5.9) (15.9) (6.4) (9.5) # (12.7) (7.9) (4.3) (5.9) (15.9) CT. NO. ENGT (3.2) (4.7) (6.4) (9.5) (12.7) (15.9) FOR.156 [4.0] MOUNTING OE.312 [7.9]* FOR NO. 6 [M3.5] SEF-TPPING SCREW One end locks into panel. Clear hole designs for #4, #6 or #8 screw. SEF-IGNING C'BORE MTERI: Nylon 6/6, U Rated 94V-0 ME FEME CT. NO. ENGT CT. NO (6.4) (9.5) (12.7) (15.9) (19.1) (22.2) (25.4) 9047 INSUTED PC SPCERS/SUPPORTS 77

84 INSUTED PC SPCERS/SUPPORTS One end attaches to chassis with self adhesive pads No drilling to chassis required leaving outside in perfect condition Board will be electrically insulated, eliminates need for insulating washers No tool required for installation Easy snap-in assembly DESIVE OCK-IN REESE SUPPORTS Other end snap into.062 (1.57) board Board is easily releasable for repair or upgrade.156 (4.0) DESIVE MOUNT.125 (3.2).280 [7.1] FOR.156 [4.0] DI MOUNTING OE DESIVE MOUNT SIMINE FOR DI MOUNTING OE.400 [10.2] FOR.062 [1.57] TICK PCB.344 [8.8] FOR.062 [1.57] TICK PCB.109 [2.8].172 [4.4].109 [2.8] INSUTED PC SPCERS/SUPPORTS.700 [17.8] SQURE DESIVE TPE One end permanently attaches to.062 (1.57) chassis ccommodates varying board thicknesses Sturdy support due to large contact area.280 [7.1].500 [12.7] SQURE CT. NO. ENGT (4.7) (6.4) (9.5) (12.7) Material: Nylon 6/6, U Rated 94V (15.9) Material: Nylon 6/6, U Rated 94V [14.3] CT. NO. ENGT FOR.062 [1.57] CSSIS (4.7).187 (4.8).100 (2.8).150 [3.8] (6.4).218 [5.6] (9.5) FOR.187 [4.8] MOUNTING OE (12.7) (15.9) (19.1) Material: Nylon 6/6, U Rated 94V (22.2) Material: Nylon 6/6, U Rated 94V (4.0).213 (5.4).400 [10.2] STURDY SUPPORT REVERSE CSSIS MOUNT SUPPORTS OCK-IN REESE End locks onto.062 (1.57) PC board Board is positively locked until manually released Board is easily releasable for repairs or upgrades FOR.156 [4.0] MOUNTING OE FOR.062 [1.57] TICK PCB.500 [12.7].203 [5.2] PC SPCER SUPPORTS One end locks into chassis Other end supports the PC Board Ideal for mid supports of large boards Simplifies assembly for multiple support applications Reduces the amount of holes required in PC board SIMINE SUPPORT DESIVE TPE WIT TB One end permanently attaches to.062 (1.57) chassis ow protrusion under chassis Small diameter frees up space on PC board FOR.062 [1.57] TICK CSSIS FOR.100 [2.6] MOUNTING OE.171 [4.4] Permanently attaches to.059 (1.51) (1.65) thick case from outside Provides flat clean cosmetic appearance Ideal for low clearance applications or for mounting directly to case walls.125 (3.2).187 (4.8) SIMINE OCK-IN End permanently attaches to.062 (1.57) PC board Small footprint frees up PC board space.187 [4.8] FOR MOUNTING OE FOR.062 [1.57] TICK PCB.375 [9.5].171 [4.4] CT. NO. ENGT (4.7) (6.4) (9.5) (12.7) (15.9) CT. NO. ENGT (3.2) (4.7) (6.4) (9.5) (12.7) (15.9) [1.8] Material: Nylon 6/6, U Rated 94V-0 FOR.213 [5.4] MOUNTING OE CT. NO. ENGT (6.4) (9.5) (12.7) (15.9).060 [1.5] RoS COMPINT ~ ISO 9001 CERTIFIED FOR.187 [4.8] MOUNTING OE Material: Nylon 6/6, U Rated 94V-0 CT. NO. ENGT (6.4) (9.5) (12.7) (15.9)

85 SPCERS/STNDOFF ORGNIZER KITS Maintain a neat complete inventory of the most frequently used spacers and standoffs in day-to-day operations. Choice of 14 different kits of the most popular spacers and standoffs. n assortment of various sizes and styles in Brass, luminum and Nylon with tapped or thru hole. Supplied with clear draw cabinet labeled for easy identification. Kits combine the most frequently used spacers or standoffs for stacking and a multi-stacking prototyping. SPCER SSORTMENT KITS ssortment of 1500 pieces in.250,.375,.500,.750 and lengths, with clearance holes for #4, #6 and # pieces of each size. Complete with cabinet. CT. NO. SPR-13 SPR-34 SPR-8 ssortment of 400 total standoffs: Female-Female standoffs and Male Female standoffs both luminum and Nylon, with lengths of.250,.500,.750 and pieces of each size. Complete with cabinet and 25 machine screws with matching thread. CT. NO. STR-15 STR-35 ST-14 ST-22 KIT SUPPIED WIT Brass Nickel Plated Spacers luminum Spacers with Iridite Finish Nylon 6/6 Spacers EX STNDOFF KITS CT. NO. STR-440 STR-632 STR-832 FEME-FEME STNDOFF KITS KIT SUPPIED WIT 4-40 Threaded Standoffs 6-32 Threaded Standoffs 8-32 Threaded Standoffs ssortment of 1500 pieces in.250,.375,.500,.750 and lengths, with thread sizes of 4-40, 6-32, and pieces of each size. Complete with cabinet. KIT SUPPIED WIT Round Brass Zinc Plated Standoffs Round luminum Standoffs with Iridite Finish ex Brass Zinc Plated Standoffs ex luminum Standoff with Iridite Finish CER OE SPCER KITS TREDED STNDOFF KITS ENGINEERING DESIGN KITS ssortment of 400 total spacers: Brass, luminum, Nylon, Rolled luminum, with lengths of.250,.500,.750 and pieces of each size. Complete with cabinet. CT. NO. SCR-4 SCR-6 SCR-8 METRIC STNDOFF KITS KIT SUPPIED WIT #4 Clear ole Spacers #6 Clear ole Spacers #8 Clear ole Spacers ssortment of 425 total pieces. Female-Female standoffs and Male-Female standoffs both aluminum and nylon, with lengths of 10mm, 12mm, 15mm and 20mm. 25 pieces of each size. Complete with cabinet and 25 machine screws with matching threads. CT. NO. STR-M3 STR-M4 ME-FEME STNDOFF KITS KIT SUPPIED WIT M3 Threaded Standoffs M4 Threaded Standoffs Brass kit is an assortment of 750 pieces of.500,.750, 1.000, and long standoffs with 4-40, 6-32 and 8-32 thread. Complete with cabinet. Stainless kit is an assortment of 250 pieces of.250,.500,.750, and long standoffs with 4-40, 6-32 and 8-32 thread. Complete with cabinet and 25 pieces of each screw size. CT. NO. ST-19 ST-20 KIT SUPPIED WIT Brass-Nickel Plate Standoffs Stainless Steel Standoffs SPCERS/STNDOFF KITS SEF-RETINING SPCER ENGINEERING DESIGN KIT CIRCUIT BORD SPCER/SUPPORT ENGINEERING DESIGN KITS ssortment of 400 total pieces per kit of Self Retaining Round Nylon Spacers. engths of.125,.250,.500 and pieces of each size/style. Complete with cabinet. ssortment of 400 total pieces per kit of a variety of Circuit Board ardware in.125,.250,.375 and.500 lengths in Nylon 6/6 material. 25 pieces of each size/style. Complete with cabinet. CT. NO. SCR-10 KIT SUPPIED WIT #4, #6, #8 & #10 Spacers CT. NO. CB-1 CB-2 CB-3 KIT SUPPIED WIT Slimine Products Tension Fit; ock-in, Easy ock and Single Sided ock-in Products - Tension Fit; ock-in, Easy ock and Single Sided Stacking Products Thru-ole and Self ligning RoS COMPINT ~ ISO 9001 CERTIFIED 79

86 PNE RDWRE Our diverse selection of panel hardware is second to none in the marketplace. Our andles, Screws, Knobs, Fan Guards and ED lens and mounting spacers provides the right solution for a variety of applications, including: Rack Mounted Equipment Carrying Cases ow Friction ssemblies D Subminiature connector ardware Instrumentation Panels and Gauges Environments where mounting hardware is subject to loss For protection from damage or debris To dress up chassis access panels, racks or controls Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.

87 PNE RDWRE FN FITERS & GURDS NDES Contempory Ferrules / Screws Instrumentation KNOBS (INSTRUMENTTION) ED RDWRE olders ens and Caps Spacers INSTRUMENT CSES SECTION CONTENTS SCREWS Panel Mounting Jack Screws Captive Panel Shoulder Thumb MISCENEOUS RDWRE Panel Bearing Panel Nuts Shaft Coupling Shaft ocks Volume Control Extender

88 Equivalent to MP, CNNON & TRW Jack Screws D subminiature connector mounting screw Custom lengths available ardware supplied unassembled and in bulk SPECIFICTIONS: YEOW: Steel, Zinc Plate and Yellow Chromate; CER: Steel, Zinc Plate and Clear Chromate; STINESS: Stainless Steel STNDRD JCK SCREWS.187 [4.8].187 [4.8] 4-40 TRED.100 [2.6] MIN. DEEP JCK SCREW JCK SCREWS SEMS JCK SCREWS Captivated helical spring lockwasher, simplifies use.187 [4.8] 4-40 TRED.100 [2.6] MIN. DEEP COMPUTER RDWRE DIRECT CCESS.187 [4.8] SCREWDRIVER SOT.187 [4.8] NUT NUT 4-40 TRED (2) FT WSERS OCKWSER JCK ONY JCK WIT RDWRE* YEOW CER STINESS YEOW CER STINESS CT. NO. CT. NO. CT. NO. ENGT CT. NO. CT. NO. CT. NO (6.4) (7.9) (9.5) (12.7) (15.8) *ardware supplied unassembled in bulk Slot provides ability to install jack with a screwdriver TRED.100 [2.6] MIN. DEEP JCK SCREW 4-40 TRED (2) FT WSERS OCKWSER JCK ONY JCK WIT RDWRE* YEOW CER YEOW CER CT. NO. CT. NO ENGT CT. NO. CT. NO (6.3) (7.9) (9.5) (12.7) (15.8) *ardware supplied unassembled in bulk [50.8].375 [9.5].187 [4.8] KNUR.078 [1.98] T SOTTED JCK SCREWS 4-40 TRED TURNBE JCK SCREWS.375 [9.5] KNUR STRIGT KNUR [45.7].410 [10.4].187 [4.8].078 [1.98] Nylon patch holds jack firmly in vibration applications..140 [3.6] 4-40 TRED.187 [4.8] NUT.187 [4.8].187 [4.8] SEMS JCK SCREW OCKWSER 4-40 TRED FT WSER SEMS JCK ONY SEMS JCK WIT RDWRE* CER CER CT. NO. ENGT CT. NO (7.3) (8.8) (16.8) 7240 *ardware supplied unassembled in bulk JCK SCREWS WIT NYON PTC 4-40 TRED.100 [2.6] MIN. DEEP NYON PTC JCK WIT NYON PTC YEOW CER STINESS CT. NO. CT. NO. CT. NO. ENGT (6.4) (7.9) (9.5).625 [15.9].235 [6.0] SIM INE KNUR.093 [2.36].156 [4.0].516 [13.1].218 [5.6] 4-40 TRED MTERI: Steel, Black Oxide WITOUT SOT WIT SOT T CT. NO. CT. NO. DIM. DIM (3.2).250 (6.4) (6.4).437 (11.1) U CIP MTERI: Steel, Zinc Plate & Clear Chromate WITOUT SOT WIT SOT CT. NO. CT. NO PNE MOUNTING RDWRE BOW TIE RETINING CIP MTERI: Steel, Nickel Plate WITOUT SOT WIT SOT CT. NO. CT. NO. DIM (31.8) (44.5) SDDE WSER 82 Supplied Unassembled.280 [7.1].265 [6.8].012 [0.30] 4-40 TRED Supplied Unassembled Supplied Unassembled CT. NO. MTERI: (6.4) MTERI: Clip & Screw: Steel, Zinc Plate Clip & Screw: Steel, Zinc Plate CT. NO & Yellow Chromate (7.1) & Yellow Chromate CT. NO [4.8].550 [14.0] RoS COMPINT ~ ISO 9001 CERTIFIED MX TRED.437 [11.1].203 [5.2].365 [9.3].068 [1.73] 4-40 TRED CERNCE OE MTERI: Clip & Screw: Steel, Zinc Plate & Yellow Chromate

89 CPTIVE PNE SCREWS MTERI: Stainless Steel per STM-581/ [1.57].312 [7.9] W.187 [4.8] STRIGT KNUR S.D. S.. T'D.281 [7.2] [1.98].312 [7.9].046 [1.2].312 [7.9] STRIGT KNUR S.D. S.. T'D T.. P.D. 90 P.. CT. S.D. S.. W NO. TRED ±.005 (.13) ±.010 (.25) (+.38) (2.0).375 (9.5).036 (.091) (2.0).500 (12.7).036 (.091) (2.0).625 (15.9).036 (.091) (2.41).375 (9.5).045 (1.14) (2.41).500 (12.7).045 (1.14) (2.41).625 (15.9).045 (1.14) CT. T.. S.D. S.. P.D. P.. NO. TRED ±.015 (.38) ±.005 (.13) ±.010 (.25) (-.40) ±.015 (.38) (3.2).078 (2.0).171 (4.3).078 (2.0).078 (2.0) (3.2).078 (2.0).296 (7.5).078 (2.0).078 (2.0) (3.2).078 (2.0).421 (10.7).078 (2.0).078 (2.0) (5.5).095 (2.41).187 (4.7).095 (2.41).093 (2.36) (5.5).095 (2.41).312 (7.9).095 (2.41).093 (2.36) (5.5).095 (2.41).437 (11.1).095 (2.41).093 (2.36) [1.17].046 [1.17].078 [2.0] ENGT.187 [4.8] 4-40 TRED CT. NO. ENGT (11.9) (13.4).046 [1.17].281 [7.2].046 [1.17].095 [2.4] CT. NO. ENGT (13.5) (15.1) (16.7) TUMB SCREWS ENGT.156 [4.0] STINESS BRSS NYON.218 [5.6] 6-32 TRED.062 [1.6].312 [7.9].062 [1.57].120 [3.1] ENGT.250 [6.4] 8-32 TRED CT. NO. ENGT (16.7) (18.2) (19.8) PNE SCREWS.437 [11.1].187 [4.8] TRED ENGT.781 [19.9] ENGT TRED TRED MTERI: Stainless Steel CT. NO. ENGT TRED DI (7.9) (9.5) (11.1) (7.9) (12.7) (7.9) (9.5) (11.1) (7.9) (12.7) (9.5) (11.1) (9.5) (12.7) MTERI: Brass, Nickel Plate CT. NO. TRED RoS COMPINT ~ ISO 9001 CERTIFIED MTERI: Nylon 6/6, U Rated 94V-2 CT. NO. ENGT TRED (6.4) (9.5) (7.6).280 (7.1).125 (3.2) (12.7) (6.4) (9.5) (9.1).275 (7.0).125 (3.2) (12.7) (6.4) (9.5) (10.8).305 (7.7).140 (3.6) (12.7) 83

90 PRECISION GROUND SOUDER SCREWS Shoulder ground to +.000/-.001 Dia, /-.000 ength. Material: Stainless Steel, STM 581/ [3.2].156 [4.0] [0.81] x TRED.005 [0.13] DEEP.281 [7.1].156 [4.0].187 [4.8] [0.81] x TRED.005 [0.13] DEEP.156 [4.0].375 [9.5].187 [4.8].187 [4.8] [0.81] x TRED.005 [0.13] DEEP SOTTED SOCKET CT. NO. ENGT CT. NO (3.2) (6.4) (9.5) (12.7) 2444 For.250 (6.4) SFT SOTTED SOCKET CT. NO. ENGT CT. NO (3.2) (6.4) (9.5) (12.7) 2448 SFT OCKS SOTTED SOCKET CT. NO. ENGT CT. NO (3.2) (6.4) (9.5) (12.7) (15.9) 2455 For.250 (6.4) SFT PNE RDWRE MTERI: Brass, Nickel Plate.437 [11.1] EX OCKNUT.500 [12.7] EX SFT FOR SFT TRED TRED.218 [5.6].500 [12.7] MTERI: Brass, Nickel Plate CT. NO CT. NO (6.4) SFT COUPING Two set screws hold shaft securely.156 [4.0].500 [12.7].437 [11.1] 6-32 SET SCREW.253 [6.5] FOR SFT 1.00 [25.4] KNUR OCKNUT.500 [12.7].500 [12.7] EX TRED STNDRD and MINITURE TRED PNE BERINGS C D E T'D B EX. NUT.187 [4.8] MTERI: Brass, Nickel Plate Set Screws: Steel, Zinc Plate Supplied unassembled CT. NO [19.1] VOUME CONTRO EXTENDERS For.250 (6.4) volume control shafts having threaded bushings. MTERI: Brass, Nickel Plate Supplied unassembled CT. NO. B (EX) C D E TRED (6.5).437 (11.1).500 (12.7).437 (11.1) Standard (3.3).343 (8.7).437 (11.1).375 (9.5) Miniature PNE NUTS For Volume Controls, Switches, Tip Jacks, etc TRED.253 [6.5] [12.7] CT. NO. B (15.9).250 (6.4) (15.9).375 (9.5) (17.4).500 (12.7) (19.1).250 (6.4) MTERI: Brass, Nickel Plate B RoS COMPINT ~ ISO 9001 CERTIFIED CT. NO. FOR TRED DIMETER TICKNESS 1448 Mounting 1/ ex.093 (2.38) 1449 Mini. Control 1/ ex.078 (1.98) 1456 Vol. Control 3/ ex.093 (2.38) 1458 Switch 15/ ex.078 (1.98) 1459 Switch Ring 15/ Knurled.062 (1.57) 1472 Filter 15/ ex.093 (2.38) MTERI: Brass,Nickel Plate

91 PENOIC INSTRUMENT CSES Choice of Sizes Sturdy construction Flush mounting panels B luminum or Phenolic Panels vailable MTERIS: Phenolic Panels:.062 (1.57) Glossy Black Phenolic, MI-P3115C luminum Panels:.062 (1.57), per QQ 318 C; Bright finished surface with pressure sensitive protective covering tape Cases and panels are sold separately Covers available in Phenolic or luminum Covers can be machined to accept dials, switches, displays Panel mounting screws available - Refer to page 133 Sturdy case can be machined for wiring access Ideal for prototype or lab use SPECIFICTIONS Knob: BS Inlay: Spun luminum Insert: Brass, Nickel Plate C C D I.D. M D I.D. M D B B COVER PNE PENOIC UMINUM PNE PNE CT. NO. CT. NO * * * * 2048 *.093 (2.36) INSTRUMENTTION KNOBS ll knobs supplied with two set screws installed C MTERIS: Phenolic Cases:.125 (3.2) Wall thickness, Molded Glossy Black Phenolic, MI-M-14, CFG PENOIC CSE TRED CT. NO. B C SIZE ND TYPE (63.5) (88.9) (31.8) 4-40 TPPED (73.0) (101.6) (39.7) 4-40 TPPED (73.0) (101.6) (39.7) USE #4 SEF TPPING SCREW (79.4) (149.2) (57.2) 4-40 TPPED (95.3) (158.8) (50.8) 6-32 BRSS INSERT (108.0) (127.0) (44.5) 6-32 BRSS INSERT (133.4) (173.0) (58.7) 6-32 BRSS INSERT (187.3) (212.7) (76.2) 6-32 BRSS INSERT SFT TTCMENT DETIS NUT CERNCE CT. SFT D M B I.D. C (C BORE NO. () () (EIGT) (MX.) (OCTION) (DEPT) () DEPT) (3.2).500 (12.7).660 (16.8) (6.4).700 (17.8).780 (19.8) (6.4).920 (23.4) (25.7) (6.4) (31.8).828 (21.0).320 (8.1).570 (14.5).360 (9.1).170 (4.3).360 (9.1).680 (17.3).500 (12.7).180 (4.6).460 (11.7).910 (23.1).640 (16.3).330 (8.4).400 (10.2).700 (17.8) (25.7).250 (6.4) (3.2).500 (12.7).660 (16.8).915 (23.4).320 (8.1).570 (14.5).360 (9.1).170 (4.3) (6.4).700 (17.8).780 (19.8) (29.2).357 (9.1).660 (16.7).480 (12.2).180 (4.6) (6.4).920 (23.4) (25.7) (38.6).500 (12.7).910 (23.1).640 (16.3).240 (6.1) (6.4) (31.8).920 (23.4) (47.2).470 (11.9).800 (20.3).780 (19.8).350 (8.9) (3.2).500 (12.7).500 (12.7).610 (15.5).160 (4.0).405 (10.3).410 (10.4).030 (0.8) INSTRUMENTTION CSES & KNOBS B (6.4).700 (17.8).625 (15.9).820 (20.8).210 (5.3).480 (12.2).468 (11.9).030 (0.8) C I.D (6.4).920 (23.4).780 (19.8) (27.7).240 (6.1).660 (16.8).640 (16.3).100 (2.5) M D (6.4) 700 (17.8).630 (16.0) (30.2).210 (5.3).510 (13.0).570 (14.5).030 (0.8) C I.D. B (6.4).920 (23.4).640 (16.3) (38.6).260 (6.6).540 (13.7).730 (18.5).120 (3.1) RoS COMPINT ~ ISO 9001 CERTIFIED 85

92 CRRYING NDES This retractable handle is manufactured with black leather-like material and Nickel Plated steel hardware. andle folds flat when not in use. Mounts with #6 screws (not supplied). ENGT.156 [4.0] (6) PS.281 [7.2].562 [14.3] (2) PS CT. NO. ENGT (114.3) (152.4) (139.7) (177.8) (152.4) (190.5) Folds flat on case when not in use. Mounts with rivets or #6 screws (not supplied) [47.0] [65.1] [126.2] NDES CT. NO. COOR 8356 BCK [144.5] [35.0] [35.0] MTERI: Grip: Polypropylene, Black Post: Steel, Nickel Plate Pin: Steel, Nickel Plate.156 [4.0] (4) PS CT. NO OV INSTRUMENTTION NDES.500 [12.7] MIN TRED (2) PS [101.6] [90.5].875 [22.3] [27.0].593 [15.1] MTERI: Zinc, Satin Brushed, Nickel Plate MTERI: luminum: QQ--200, lloy 6061-T6, Black nodized per MI (12.7) RDIUS TRED.625 [15.9] D.281 [7.2] B UMINUM B D CT. NO. MTG. CTRS. EIGT DEPT (101.6) (44.5) (101.6) (50.8) (114.3) (44.5) (114.3) (50.8) (127.0) (44.5).500 (12.7) (127.0) (50.8) (139.7) (44.5) (139.7) (50.8) (152.4) (34.9).375 (9.5) (152.4) (44.5) (152.4) (50.8).500 (12.7) (163.5) (44.5) CUSTOM NDES Keystone is fully integrated to meet your total design and production needs. Our specialty is manufacturing custom designs and modifications of standard items. Forward your CD drawing or print to our Engineering Department for a quote on your specific production requirements or visit our Part Builder at 86 RoS COMPINT ~ ISO 9001 CERTIFIED

93 ROUND INSTRUMENTTION NDES COICE of BRSS or UMINUM FERRUES FERRUES FOR ROUND NDES To protect and support panel surface R B MTERI: Brass: STM-B16, Nickel Plate luminum: QQ--200, lloy 6061-T6, Black nodized per MI E TRED C D T O.D. I.D. BRSS UMINUM B D E R C CT. NO. CT. NO. MTG. CTRS. EIGT DEPT TRED RDIUS DIMETER (31.8) (25.4) (50.8) (25.4).375 (9.5) (4.0).156 (4.0) (76.2) (25.4) (31.8).625 (15.9) (38.1).625 (15.9) (38.1).750 (19.1) (44.5).625 (15.9) (44.5).750 (19.1) (50.8).625 (15.9) (31.8) (25.4) (38.1) (25.4) (50.8) (25.4) (76.2) (25.4) (76.2 ) (38.1) (76.2) (44.5) (88.9) (38.1) (101.6) (38.1) (101.6) (44.5) (114.3) (38.1) (114.3) (44.5) (127.0) (38.1) (127.0) (44.5) (139.7) (38.1) (152.4) (38.1) (152.4) (44.5) (76.2) (38.1) (101.6) (38.1) (101.6) (44.5) (114.3) (38.1) (114.3) (44.5) (115.9) (38.1) (127.0) (38.1) (127.0) (44.5) (139.7) (38.1) (152.4) (38.1) (152.4) (44.5) (163.5) (44.5) (101.6) (34.9) (152.4) (34.9).156 (4.0) (4.7).187 (4.7).250 (6.4) (4.7).187 (4.7).562 (14.3) (6.4).250 (6.4).562 (14.3) (7.9).312 (7.9).375 (9.5) (9.5).375 (9.5) RoS COMPINT ~ ISO 9001 CERTIFIED MTERI: Brass: STM-B16, Nickel Plate luminum: QQ--200, lloy 6061-T6, Black nodized per MI BRSS UMINUM FOR FOR CT. NO. CT. NO. TRED DIMETER O.D. I.D. T (4.0).250 (6.4).120 (3.0).125 (3.2) (4.7).312 (7.9).120 (3.0).125 (3.2) (4.7) (7.9) (3.7) (3.2) (6.4) (9.5) (4.3) (4.7) (7.9) (14.3) (5.0) (6.4) NDE MOUNTING SCREWS Phillips drive pan head machine screws MTERI: Stainless Steel CT. DRIVER NO. ENGT TRED SIZE (6.4) (9.5) (12.7) (6.4) (9.5) (12.7) (9.5) (12.7) (19.1) (9.5) (12.7) (19.1) TRED INSTRUMENTTION NDES 87

94 PSTIC FN FITER SSEMBY unique package consisting of guard, filter media and retainer. The guard and retainer are manufactured with U Rated 94V-B material. The filter media is made of polyester foam and aluminum mesh which allows free passage of air (24 CFM) with minimum air resistance and pressure drop. major feature of this assembly is that when the filter media requires maintenance you simply remove the snap-fit retainer to clean or replace the filter, leaving the guard and fan in place. This assures protection to the fan blades and eliminates damage to the fan or equipment during cleaning. RETINER MTERI: Glass filled Nylon 6/6, U Rated B Snap-fit construction Designed for minimum air restriction PSTIC FN FITER SSEMBY MEDI MTERI: White Polyester foam and luminum screen Constructed to allow free passage of air with mimimum resistance and pressure drop (24 CFM) as a high surface-area contact for impingement of dust particles elps reduce external fan noise Easily cleaned by vacuuming or washing with mild soap, detergent or cleaning solvent Replacement media available GURD MTERI: Glass filled Nylon 6/6, U Rated B.250 (6.4) maximum ring spacing Decreased noise level Countersunk mounting holes (4) Withstands high impact FN GURD & FITER SSEMBIES.177 [4.5] MTG. OES EIGT WIDT MTG. CENTERS.177 [4.5] MTG. OES EIGT WIDT FN GURDS SNP-FIT MEDI RETINER MTG. CENTERS FITER SSEMBY FIG. FOR EIGT/ MTG. MEDI ONY CT. NO. NO. FN SIZE WIDT TICKNESS CENTERS CT. NO (40mm) (46.7).327 (8.3) (32.0) 8443-MO (60mm) (65.0).488 (12.4) (50.0) 8444-MO (80mm) (86.7).488 (12.4) (72.0) 8487-MO (92mm) (96.9).488 (12.4) (82.5) 8488-MO (120mm) (126.0).496 (12.6) (105.0) 8489-MO.177 [4.5] MTG. OES Fig. 1 MTG. CENTERS.177 [4.5] MTG. OES Fig. 2 MTG. CENTERS MEDI GURD FN (Customer Supplied) EIGT WIDT Fig. 3 EIGT WIDT Fig. 4 MTG. OE GURD FIG. FOR EIGT/ CENTER CT. NO. NO. FN SIZE WIDT TICKNESS SPCING (40mm) (42.7).169 (4.3) (32.0) (60mm) (60.4).236 (6.0) (50.0) (80mm) (80.7).236 (6.0) (72.0) (92mm) (92.3).236 (6.0) (82.5) (120mm) (120.4).244 (6.2) (105.0) 88 RoS COMPINT ~ ISO 9001 CERTIFIED

95 Made of high quality steel wire which combines strength with superior forming. The units offer clean, strong butt welds with minimum flash and have consistent guard diameters to enhance maximum air-flow and venting. vailable for most popular size fans Protects fingers as well as fan blades Same mounting hole pattern as standard fans Chrome Plate offers a high luster finish MET GURDS MTERI: Steel, Nickel Chrome Plate FITS 1.50 (40mm) FNS FITS 2.50 (60mm) FNS FITS 3.12 (80mm) FNS [32.0] SQURE.189 [4.8] [50.0] SQURE.196 [5.0] [71.4] SQURE.195 [5.0].180 [4.6] (4) PS [29.2] [82.6] SQURE.160 [4.1] (4) PS [89.9].195 [5.0].180 [4.6] (4) PS.180 [4.6] (4) PS [104.8] SQURE [53.0] CONSTRUCTION CONSTRUCTION Rings:.063 (1.60) wire diameter Rings:.063 (1.60) wire diameter CT. NO Ribs:.063 (1.60) wire diameter CT. NO Ribs:.063 (1.60) wire diameter CT. NO [111.3].217 [5.5].180 [4.6] (4) PS [104.8] SQURE.192 [4.9] (4) PS [76.2] FITS 3.62 (92mm) FNS FITS 4.50 (120mm) FNS FITS 4.50 (120mm) FNS CONSTRUCTION CONSTRUCTION Rings:.063 (1.60) wire diameter Rings:.063 (1.60) wire diameter CT. NO Ribs:.063 (1.60) wire diameter CT. NO Ribs:.063 (1.60) wire diameter CT. NO CONSTRUCTION Rings:.063 (1.60) wire diameter Ribs:.063 (1.60) wire diameter [107.2].223 [5.7] CONSTRUCTION Rings:.071 (1.80) wire diameter Ribs:.091 (2.31) wire diameter FN/FINGER GURDS FITS 4.50 (120mm) FNS FITS 6.00 (150mm) FNS FITS (250mm) FNS [104.8] SQURE.217 [5.5] [174.0] SQURE [162.1].180 [4.6] (4) PS [115.6] [154.2] (2) PS.250 [6.4].180 [4.6] (4) PS [222.3] [6.4] CONSTRUCTION CONSTRUCTION Rings:.071 (1.80) wire diameter Rings:.071 (1.80) wire diameter CT. NO Ribs:.071 (1.80) wire diameter CT. NO Ribs:.091 (2.31) wire diameter CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED CONSTRUCTION Rings:.091 (2.31) wire diameter Ribs:.091 (2.31) wire diameter 89

96 ED ENS CPS Designed for use with T-1 or T-1 3/4 EDs, these ens Caps are available in round or square configurations. They snap-mount through the front panel for easy, light-finger pressure, intsallation. The ED is inserted into the cap from behind the panel and held securely in place. The ens Cap protects the ED from physical damage while guarding the components from electrostatic discharge (ESD), up to 16KV. More economical than indicator light assemblies, the caps feature striated lines and fresnel rings which permit up to 180 viewing angles with either diffused or non-diffused ED s. They provide exceptionally high contrast and visibility. MTERI: Polycarbonate vailable in Red, Green, Yellow and Clear ED ENS CPS & ODERS.190 [4.9].150 [3.8].290 [7.4].171 [4.4] SQ. ROUND CPS.280 [7.1].430 [10.9] [4.9].290 [7.4] [5.6].060 [1.52] SQURE CPS.171 [4.4].280 [7.1].430 [10.9].190 SQ. [1.52].220 [4.9] [5.6] SQ [7.4].171 [4.4] FIG. 6 T-1 FIG. 7 T-1 3/4 OW PROFIE CT. FIG. ED MTG. OE MIN. MTG. PNE NO. COOR NO. SIZE SIZE CENTERS TICKNESS 8674 RED 8675 GREEN 8676 YEOW 6 T (4.3).250 (6.4) (1.57/3.18) 8677 CER 8686 RED 8687 GREEN 7 T-1 3/4.250 (6.4).375 (9.5) (.79/6.4) 8688 YEOW (See Note) 8689 CER Note: When mounting T-1 3/4 ow Profile Caps (Fig. 4 or Fig. 7) in panels.125 (3.2) thick or less a spacer must be used. Spacer CT. NO MTERI: White Nylon.360 (9.1) O.D. 1/4 I.D. 1/8 g. SNP-IN T-1 & T-1 3/4 ED ODERS Designed for use with T-1 or T-1 3/4 ED s in.060 (1.52) (1.78) thick panels. The holder snaps into the front panel with easy, light-finger pressure. The ED snaps into the holder from behind the panel and is held securely in place..280 [7.1].280 [7.1] SQ..070 [1.78] FIG. 1 T-1 FIG. 2 T-1 3/4 FIG. 3 T-1 FIG. 4 T-1 3/4 STNDRD EIGT OW PROFIE CT. FIG. ED MTG. OE MIN. MTG. PNE CT. FIG. ED MTG. OE MIN. MTG. PNE NO. COOR NO. SIZE SIZE CENTERS TICKNESS NO. COOR NO. SIZE SIZE CENTERS TICKNESS 8650 RED 8656 RED 8651 GREEN 8657 GREEN 8652 YEOW 8653 CER 8662 RED 8663 GREEN 8664 YEOW 8665 CER 1 T (4.3).250 (6.4) (.79/1.57) 2 T-1 3/4.250 (6.4).375 (9.5) (1.57/3.18) FIG. 5 T-1 3/4 STNDRD EIGT CT. FIG. ED MTG. OE MIN. MTG. PNE NO. COOR NO. SIZE SIZE CENTERS TICKNESS 8680 RED 8681 GREEN YEOW 5 T-1 3/4 (6.4) SQURE 8683 CER.375 (9.5) (1.57/3.18) 8658 YEOW 8659 CER 8668 RED 8669 GREEN 8670 YEOW 8671 CER.070 [1.78].430 [10.9] 3 T (4.3).250 (6.4) (1.57/3.18) 4 T-1 3/4.250 (6.4).375 (9.5) (.79/6.4) (See Note).430 [10.9] MTERI: Nylon 6/6, Black CT. ED MTG. OE NO. SIZE B C SIZE 8309 T (2.9).232 (5.9).188 (4.8).171 (4.3) 8310 T-1 3/4.200 (5.0).315 (8.0).274 (6.9).250 (6.4) B.030 [0.76] C 90 RoS COMPINT ~ ISO 9001 CERTIFIED

97 UNIVERS FOR T-1 & T-1 3/4 Unique design separates leads and retains Tri-ead and Bi-ead components. Designed for PC board mounting of Tri-ead and Bi-ead T-1 and T-13/4 EDS Provides height control, lead retention and stability. lso suitable for mounting lamps, resistors, transistors, diodes, capacitors, etc. MTERI: Black PVC, U Rated 94V-0 KEY FETURES Positive self-alignment of leads on.100 (.25) centers. No special tools required MTERI: Natural Nylon, U Rated 94V [2.4].133 [3.4].045 [1.1] DI BOSSES (6) PS. SEF-IGNING FOR BI-ED T-1 & T-1 3/4 T-1 T-1 3/4 T-1 3/4 T [5.0].020 [0.5].100 [2.5].032 [0.81] SQURE [2] PS.157 [4.0].045 [1.1] DI BOSSES (6) PS. FOR T-1 3/4 and T-1 CT. NO. ENGT CT. NO. ENGT (3.0) (10.2) (3.6) (10.7) (4.1) (11.2) (4.6) (11.4) (5.1) (11.7) (5.6) (12.2) (6.1) (12.7) (6.4) (14.0) (6.6) (15.2) (7.1) (16.5) (7.6) (17.8) (8.1) (19.1) (8.6) (20.3) (8.9) (21.6) (9.1) (22.9) (9.7) (23.5) This features an internally tapered barrier which guides the leads and eliminates crimping or shorting. The bottom bosses serve the dual purpose of heat dissipation and easy post soldering cleanup. RoS COMPINT ~ ISO 9001 CERTIFIED CT. CT. NO. NO. ENGT (3.0) (3.6) (4.1) (4.6).075 (1.9) (5.1) (5.6) (6.1) (6.4) (6.6).190 (4.8) (7.1) (7.6) (8.1) (8.6) (8.9).200 (5.1) (9.1) (9.7).325 (8.3) SEF-RETINING FOR T [2.5].140 [3.6].040 [1.0] BOSSES (6) PS.197 [5.0].020 [0.5] Features internal retention teeth which secure ED leads onto spacers. This features an internally tapered barrier which guides the leads and eliminates crimping or shorting. The bottom bosses serve the dual purpose of heat dissipation and easy post soldering cleanup. MTERI: Natural Nylon, U Rated 94V [0.5].100 [2.5].100 [2.5].032 [0.81] SQURE [2] PS ED RETINING ND DRINGE.040 [1.02] x.065 [1.65] SOT (4) PS.025 [0.62].255 [6.5].208 [5.3] TYP. KEY FETURES Internal design eliminates crimping or shorting of leads Self alignment of leads on.100 (.25) centers. Spacer will stay gripped to ED leads during assembly No special tools required T-1 CT. NO. ENGT (3.0) (3.6) (4.1) (4.6).060 (1.5) (5.1) (5.6) (6.1) (6.4) (6.6) (7.1) (7.6) (8.1).185 (4.7) (8.6) (8.9) (9.1) (9.7).310 (7.9) T-1 3/4 T-1 CT. CT. NO. NO. ENGT (10.2) (10.7) (11.2) (11.4).325 (8.3) (11.7) (12.2) (12.7) (14.0).450 (11.4) (15.2) (16.5).575 (14.6) (17.8) (19.1) (20.3) (21.6).690 (17.5) (22.9) (23.5) T-1 CT. NO. ENGT (10.2) (10.7) (11.2) (11.4).310 (7.9) (11.7) (12.2) (12.7) (14.0).435 (11.0) (15.2) (16.5) (17.8) (19.1) (20.3).650 (14.2) (21.6).690 (17.5) (22.9) (23.5) ED SPCER MOUNTS 91

98 PINS, PUGS, JCKS & RDWRE Our PCB pins & receptacles, solder terminals, tip, test, banana and binding post receptacles & terminals, and USB connectors and sockets offer the most versatility for virtually any device requirements such as: udio Circuitry ome theaters Electronic test equipment Telephone switchboards igh Speed computer connections Telecommunication hook ups CTV equipment hook ups Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.

99 PINS, PUGS, JCKS & SOCKETS JCKS ND PUGS udio Jacks Banana Jacks/Plugs Binding Posts Phono Jacks & Plugs Test Jacks/Plugs MICRO PINS /JCKS Micro Jacks Micro Pins Shorting Jacks & Pins SOCKET, OGEN MP SECTION CONTENTS TRNSISTOR Sockets Mounting Kits Mica Insulators T0-3 Covers USB JCKS ND PUGS 2.0 and B-Type and B-Type Firewire, IEEE

100 SOCKET SPECIFICTIONS: Shell: Phosphor Bronze Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze Contact rea: Gold Flash over Nickel Solder Trails: Tin over Nickel PUG SPECIFICTIONS: Shell: Steel, Nickel Plate Insulator: Thermoplastic, Rated U 94V-0 Contact: Bronze, Gold Flash over Nickel SURFCE MOUNT ORIZONT USB 2.0 PUGS & SOCKETS TRU OE MOUNT EECTRIC CRCTERISTICS Rated Voltage: 30V (RMS) Contact Current Rating: 1 mp DC max. Contact Resistance: 15 m max. Insulation Resistance: 1000 m min. Dielectric Withstanding Voltage: 750V C for 1 minute MECNIC CRCTERISTICS Operating Temperature: -13 F (-25 C) to +176 F (+80 C) Durability: 1500 Cycles min. TYPE SOCKETS VERTIC DEVICE PPICTIONS bility to daisy chain more than one input device Mouse/Keyboards MP3 Players Printers/Scanners Digital Cameras/Video Memory Sticks PDs and Cell Phones DU STCKING USB 2.0 PUGS & SOCKETS.151 [3.8].177 [4.5] CT. NO [14.5].516 [13.1].571 [14.5].516 [13.1] Cat. No [2.9] TYP..091 [2.30] (2) PS.043 [1.1] TYP..517 [13.2].276 [7.00].280 [7.1].079 [2.00].142 [3.6] [7.1] 921 SURFCE MOUNT.551 [14.0].405 [10.3].551 [14.0].405 [10.3].272 [6.9].189 [4.8].275 [7.0].118 [3.0] Cat. No [0.92] (4) PS.107 [2.7].517 [13.2].079 [2.00].276 [7.0].091 [2.30] (2) PS CT. NO [2.9].225 [5.7].059 [1.50].036 [0.92] (4) PS.107 [2.7].551 [14.0].163 [4.1] CT. NO. 923 CT. NO. 922 FETURES vailable for on-board applications such as memory sticks Cable clamp style for creating custom cables Gold plated contacts for low contact resistance and excellent reliability TRU OE MOUNT [13.3] [14.5].280 [7.1].517 [13.2].079 [2.00] TYPE PUGS.276 [7.0].091 [2.30] (2) PS.177 [4.5].571 [14.5].492 [12.5].036 [0.92] TYP..224 [5.7].615 [15.6].669 [17.0].606 [15.4].118 [3.0].405 [10.3].224 [5.7].517 [13.2] CBE PUG.079 [2.00].276 [7.0].107 [ [5.4].091 [2.30] (4) PS.240 [6.1].472 [12.0].734 [18.7].087 [2.2].047 [1.2].079 [2.0].177 [4.5].240 [6.1].472 [12.0].106 [2.7].734 [18.7].047 [1.2].079 [2.0].177 [4.5] Supplied unassembled POS. 4 POS [40.00] POS [.90] EG (2) PS POS [.90] EG (2) PS CT. NO [1.10] OE (2) PS PCB EDGE.114 [2.9].098 [2.5].461 [11.7] [4.6].035 [0.9] x.098 [2.50].079 [2.0].078 [2.0] X.276 [7.0].043 [1.1] (4) PS.043 [1.10] OE (2) PS PCB EDGE.114 [2.9].083 [2.1].079 [2.0].035 [.90] OE (4) PS CT. NO [7.0] CT. NO [11.7] [4.6].035 [0.9] x.098 [2.50].472 [12.00].177 [4.50] 94 RoS COMPINT ~ ISO 9001 CERTIFIED

101 SOCKET SPECIFICTIONS: Shell: Phosphor Bronze Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze Contact rea: Gold Flash over Nickel Solder Trails: Tin over Nickel PUG SPECIFICTIONS: Shell: Steel, Nickel Plate Insulator: Thermoplastic, Rated U 94V-0 Contact: Bronze, Gold Flash over Nickel SURFCE MOUNT SOCKET USB 2.0 PUGS & SOCKETS EECTRIC CRCTERISTICS Rated Voltage: 30V (RMS) Contact Current Rating: 1 mp DC max. Contact Resistance: 15 m max. Insulation Resistance: 1000 M min. Dielectric Withstanding Voltage: 750V C for 1 minute MECNIC CRCTERISTICS Operating Temperature: -13 F (-25 C) to +176 F (+80 C) Durability: 1500 Cycles min. DEVICE PPICTIONS MICRO-USB TYPE B SOCKETS/PUGS Ideal for Miniature applications bility to daisy chain more than one input device Memory Sticks Mouse/Keyboards Printers/Scanners/Docking Stations MP3/udio Devices Digital Video Cameras & Still Cameras Portable Media Players Gaming eadsets Smart Phones/PD's CBE PUG.217 [5.5].150 [3.8].197 [5.0] CT. NO. 940 (Bulk) CT. NO. 940TR (Tape & Reel) Tape & Reel Spec s: 24mm wide; 16mm pitch; 13 inch reel (1000 pieces per reel) CT. NO. 934 (Bulk) PIN 1 PIN [9.6].116 [3.0].303 [7.7] CT. NO. 934TR (Tape & Reel) Tape & Reel Spec s: 24mm wide; 16mm pitch; 13 inch reel (1000 pieces per reel) TRU OE SOCKET.315 [8.0].022 [0.6].021 [0.55].307 [7.8].085 [2.1].173 [4.4].059 [1.5] PCB EDGE.118 [3.00] SURFCE MOUNT SOCKET MINI-USB TYPE B SOCKETS/PUGS.031 [0.8].129 [3.3].156 [4.0].232 [5.9].098 [2.5].169 [4.3].428 [10.9].028 [0.7].149 [3.80].031 [0.8] OE (2) PS.075 [1.9] SQR PCB EDGED.020 [0.5].166 [4.2].035 [0.89] DI.172 [4.4].386 [9.8].080 [2.0].181 [4.6].039 [1.0].205 [5.2].026 [0.7] SPCING.016 [0.40] X.055 [1.4].057 [1.4].141 [3.6].161 [4.1] Supplied unassembled CT. NO. 941 Supplied unassembled CT. NO. 935 USB TYPE B SOCKETS/PUGS SURFCE MOUNT SOCKET.268 [6.81] CBE PUG.920 [23.5] PIN 1 PIN [24.50].120 [3.0].320 [8.0] CBE PUG.210 [5.3] PIN 1 Wiring Detail PIN 5 USB 2.0 PUGS & SOCKETS.474 [12.0] Supplied unassembled POS [12.0] POS [16.0] POS. 2 POS [16.0].418 [10.6].418 [10.6] POS. 3 POS [10.3].115 [2.9] POS. 3 POS [5.5].354 [9.0].047 [1.2] DI (2) PS [36.6].118 [3.0].049 [1.3].028 [0.7].098 [2.5] POS. 2 POS [3.7].376 [9.5].036 [0.92] OE (4) PS POS. 1 POS [2.1].091 [2.30] OE (2) PS PCB EDGE CT. NO. 924 CT. NO. 933 CT. NO [7.0].354 [9.0] RoS COMPINT ~ ISO 9001 CERTIFIED [5.5] [13.8].134 [3.4].238 [6.0].055 [1.40] OE (2) PS.315 [8.0].283 [7.2] 95

102 EECTRIC CRCTERISTICS: Rated Voltage: 30V (RMS) Contact Current Rating: 1 mp DC max. Contact Resistance: 15 m max. Insulation Resistance: 1000 M min. Dielectric Withstanding Voltage: 750V C for 1 minute MECNIC CRCTERISTICS: Operating Temperature: -13 F (-25 C) to +176 F(+80 C) Durability: 1500 Cycles min. TRU-OE MOUNT SOCKET USB 3.0 PUGS & SOCKETS USB 3.0 DESIGN DVNTGES: Port Expansion: lleviates restriction of limited COM Ports and available IRQ s Compatibility: Backward compatible with USB 2.0 devices Fast Data Transfer: Up to 480 Gbps; 10 times faster than USB 2.0 devices and 200 times faster than serial ports. USB TYPE SOCKETS/PUGS USB 3.0 (SUPER SPEED)DEVICE PPICTIONS: External hard drives igh resolution web & video cameras Digital video cameras & still cameras Multi-channel audio interfaces External media such as Blu-Ray drives igh-definition video content Multi-gigabyte mobile phones Portable media players CBE PUG.515 [13.1] USB 3.0 PUGS & SOCKETS CT. NO [14.7].614 [15.6] SOCKET SPECIFICTIONS: Shell: Steel, Nickel Plated Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze, Gold Flash over Nickel.197 [5.0].024 [0.6] SOCKET SPECIFICTIONS: Shell: Steel, Nickel Plated Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze, Gold Flash over Nickel.287 [7.3].650 [16.5].466 [11.8] MICRO-USB TYPE B SOCKETS/PUGS SURFCE MOUNT SOCKET.506 [12.8].526 [13.4].537 [13.6].187 [4.8].118 [3.0].085 [2.2].116 [3.0].075 [1.9] SQR TYP. PCB EDGE.276 [7.0].079 [2.0].276 [7.0].517 [13.1].090 [2.3] (2) PS.079 [2.0] TYP..027 [0.7] DI (9) PS CT. NO. 947 CT. NO [4.9].403 [10.2] CT. NO [1.4].098 [2.5].026 [0.6] TYP..016 [0.40] (5) PS.264 [6.7].059 [1.5].078 [2.00].053 [1.3].132 [3.4] Supplied unassembled PUG SPECIFICTIONS: Shell: Steel, Nickel Plated Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze, Gold Flash over Nickel Supplied unassembled PUG SPECIFICTIONS: Shell: Steel, Nickel Plated Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze, Gold Flash over Nickel USB TYPE B SOCKETS/PUGS [40.00].920 [23.4].472 [12.00] CBE PUG.532 [13.5].190 [4.8].177 [4.50] TRU-OE MOUNT SOCKET CBE PUG.472 [12.0].724 [18.4].508 [12.9].115 [2.9] Supplied unassembled [36.0].553 [14.0].406 [10.3] 96 SOCKET SPECIFICTIONS: Shell: Phosphor Bronze, Nickel Plated Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze, Gold Flash over Nickel Contact rea: Gold Flash over Nickel Solder Tails: Tin over Nickel (4) PS..091 [2.3].474 [12.0] CT. NO. 950 (2) PS. CT. NO [0.9].197 [5.0].098 [2.5].079 [2.0].335 [8.5].028 [0.7] DI (5) PS..157 [4.0].105 [2.7] RoS COMPINT ~ ISO 9001 CERTIFIED PUG SPECIFICTIONS: Shell: Steel, Nickel Plated Insulator: Thermoplastic, U Rated 94V-0 Contacts: Phosphor Bronze, Gold Flash over Nickel.411 [10.4].315 [8.0]

103 SUPER SPEED SERI BUS - FIREWIRE SOCKETS FETURES Snap-In PC tails hold connector in position for soldering Gold Plated contacts for low contact resistance and excellent reliability SPECIFICTIONS Shell: Phosphor Bronze Insulator: Thermoplastic, Rated U 94V-0 Contacts: Phosphor Bronze Plating: Contact rea: Gold Flash over Nickel Solder Tails: Tin over Nickel Plate.532 [13.5] POS. 6 POS. 2 POS. 1 POS. 5 CT. NO. 927 (Bulk) IEEE 1394 SURFCE MOUNT ORIZONT SUPPIED ON TPE ND REE.327 [8.3].039 [1.0].028 [0.7] X.087 [2.2].098 [2.5].079 [2.0].183 [4.7] CT. NO. 927TR (Tape & Reel) Tape & Reel Spec s: 32mm wide; 24mm pitch; 13 inch reel (200 pieces per reel).654 [16.6].394 [10.0] [1.0].461 [11.7].008 [0.2].183 [4.7] PCB EDGE.333 [8.5] DESIGN DVNTGES Superfast Data Transfer: Current speeds of 100Mbps, 200Mbps and 400Mbps, and roadmapped to 1GB to 3.2 GBps per second Daisy Chaining: Up to to 63 devices, each one acts as an active repeater on the bus, with a maximum of 16 repeats Port Expansion: lleviates restriction of limited COM Ports and available IRQ s Wide Bandwidth: Operates in asynchronous or isochronous data streams. Digital interface designed for high speed applications for PC peripherals, consumer electronics and communications. Simple Connections: True Plug and Play, no jumpers, DIP Switches or IRQ s to set ot Swapping: llows peripherals to be connected or disconnected without turning off computer ighly Versatile Bus: One bus can handle a variety of devices operating at different speed classes for true backwards compatibility Standard Digital Interface: llows consumer electronics and computer devices to communicate together on one interface POS. 1 POS. 5 TRU OE MOUNT POS [13.5] POS. 6 UP-RIGT.059 [1.5].713 [18.1].118 [3.0].262 [6.7] CT. NO. 930 CT. NO. 929 FIREWIRE PUG.079 [2.0].031 [0.80] (6) PS.079 [2.0] (3) PS [6.7] [2.0] [10.5] [1.0].284 [7.2] PCB EDGE FETURES Modular design allows easy and fast assembly of components Integrated strain relief - crimps to wire insulation Gold Plated contacts for low contact resistance and excellent reliability EECTRIC CRCTERISTICS Rated Voltage: 30VC (RMS) Contact Current Rating: 1 mp DC max. Contact Resistance: 15 m Insulation Resistance: 1000 m min. Dielectric Withstanding Voltage: 750V C for 1 minute Operating Temperature: 32 F (0 C) to +104 F (40 C) Capacitance: 2pF max. MECNIC CRCTERISTICS Durability: >1500 cycles Mating Force: 35 Newtons min. Withdrawal Force: 10 Newtons min. DEVICE PPICTIONS Broadcast TV Cable TV Digital Camcorders Digital Cameras & VCRs Computers & ard Disks DVD Players Printers & Monitors Stereos POS [13.5] POS. 1 POS. 5 TRU OE MOUNT ORIZONT POS [0.5].079 [2.0] TYP..098 [2.5].327 [8.3].394 [10.0] [2.0] [1.0].461 [11.7].571 [14.5].183 [4.7].031 [0.80] (8) PS.063 [1.60] (2) PS.032 [0.8].183 [4.7].333 [8.5] PCB EDGE FIREWIRE PUGS & SOCKETS IEEE 1394 SPECIFICTIONS Shell: Phosphor Bronze Insulator: Thermoplastic, Rated U 94V-0 Contacts: Phosphor Bronze Plating: Contact rea: Gold Flash over Nickel Solder Tails: Tin over Nickel Plate [31.5] EECTRIC CRCTERISTICS Contact Resistance: 30m max. Insulation Resistance: 1000 m min. Withstanding Voltage: 500V ± 50V DC Operating Temperature: 32 F (0 C) to +104 F (40 C).210 [5.3] CT. NO. 928 (Supplied Unassembled) RoS COMPINT ~ ISO 9001 CERTIFIED 97

104 Space saving design for high density packaging Beryllium Copper multi-spring contact maintains retention after multiple insertions Ideal for mounting transistors, resistors, diodes, IC s and similar miniature components Custom micro jacks manufactured to your specifications Other platings available upon request MICRO JCKS SPECIFICTIONS Body: Brass, STM-B16 Spring: Beryllium Copper (QQ-C-533) Plating: Gold: per MI-G RoS (RoS Compliant) Tin/ead: to per MI-T-10727, Type 1 RoS (Non-RoS Compliant) PTING OPTIONS CONTCT PTING BODY SPRING RoS Gold/Gold Gold Gold Compliant Tin/Tin Tin/ead Tin/ead Tin/Gold Tin/ead Gold Non-Compliant.015 (.38 ) (.53) PIN - SODER MOUNT.015 (.38) (.53) PIN - PRESS FIT.015 (.38) (.64) PIN - TPER-FIT 3-FINGER COSED ENTRY CONTCT.055 [1.40].016 [0.41] 3-FINGER COSED ENTRY CONTCT.055 [1.40].016 [0.41] 4-FINGER COSED ENTRY CONTCT.072 [1.9].020 [0.50].083 [2.11].038 [0.96] EX..083 [2.11].130 [3.3].095 [2.4].056 [1.42].038 [0.96].038 [0.96].045 [1.14] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. ength Dia (3.6) (4.3) (1.07) RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. ength Dia (3.6) (4.3) (1.02) (7.2) RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. ength Dia (4.1) (4.8) (1.40) MICRO JCKS.015 (.38) (.64) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.142 [3.6].161 [4.1].055 [1.39].022 (.56) (.86) PIN - PRESS FIT.072 [1.83].016 [0.41].093 [2.36] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.50) 6-FINGER COSED ENTRY CONTCT.086 [2.2].015 [0.38].028 [0.71].015 (.38) (.64) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.248 [6.3].205 [5.2].049 [1.24].063 [1.60].041 [1.04].089 [2.23] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.32).022 (.56) (.86) PIN - SODER MOUNT 6-FINGER COSED ENTRY CONTCT.080 [2.03].045 [1.14].022 (.56 ) (.81) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.014 [0.4].233 [5.9].060 [1.52].077 [2.0].120 [3.1].259 [6.6] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.60).025 (.64) (.94) PIN - SODER MOUNT 6-FINGER COSED ENTRY CONTCT.077 [1.96].025 [0.7] [5.1] [4.3].061 [1.55].091 [2.3].070 [1.78] KNUR RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.70).090 [2.29].062 [1.57].083 [2.11] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.65).057 [1.45].083 [2.11] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. ength Dia (2.4) (2.7) (1.57) (3.9).025 (.64) (.94) PIN - SODER MOUNT.025 (.64) (.94) PIN - PRESS FIT.032 (.81) (1.17) PIN - SWGE MOUNT.078 [1.98].180 [4.6].062 [1.57].040 [1.02] 6-FINGER COSED ENTRY CONTCT.040 [1.02].090 [2.29].210 [5.3].187 [4.7] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.65).078 [1.98].165 [4.2].057 [1.45] 6-FINGER COSED ENTRY CONTCT.020 [0.52].057 [1.45] EX RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.60) 4-FINGER COSED ENTRY CONTCT [5.9] [5.1].040 [1.02].065 [1.65].092 [2.34].128 [3.3].168 [4.3] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. ength Dia (1.6) (2.4) (1.75) 98 RoS COMPINT ~ ISO 9001 CERTIFIED

105 .032 (.81) (1.17) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT [5.3] [4.6].091 [2.3].018 [0.47].130 [3.3].073 [1.9] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.93) MICRO JCKS.032 (.81 ) (1.17) PIN - PRESS-FIT.103 [2.6] 4-FINGER COSED ENTRY CONTCT.220 [5.6].195 [5.0].072 [1.83].093 [2.36].030 [0.77].080 [2.1].082 [2.09] KNUR.130 [3.3] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.98).032 (.81 ) (1.17) PIN - PRESS-FIT 4-FINGER COSED ENTRY CONTCT.206 [5.3].180 [4.6].071 [1.80].091 [2.32].018 [0.47].120 [3.1].071 [1.80] EX. RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.93).032 (.81) (1.17) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.221 [5.6].018 [0.45].072 [1.83].090 [2.29].123 [3.1].015 [0.37] KNOCK OUT PUG.032 (.81) (1.17) PIN - SODER MOUNT.032 (.81) (1.17) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.236 [6.0].195 [5.0].084 [2.13].126 [3.2].020 [0.51].130 [3.3] 4-FINGER COSED ENTRY CONTCT.220 [5.6].091 [2.3].124 [3.2].192 [4.9].032 [0.8].085 [2.2] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.93).032 (.81) (1.17) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.236 [6.0].020 [0.50] 4-FINGER COSED ENTRY CONTCT.400 [10.2].357 [9.1].143 [3.7].126 [3.2].036 [0.93].130 [3.3].084 [2.14].063 [1.60] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (2.26).025 [0.64].157 [4.0] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (2.21).040 (1.02) (1.27) PIN - SODER MOUNT 6-FINGER COSED ENTRY CONTCT.290 [7.4] 4-FINGER COSED ENTRY CONTCT.412 [10.5].260 [6.6].100 [2.6].340 [8.7].187 [4.8].143 [3.7].118 [3.0].016 [0.41].053 [1.34].100 [2.6].157 [4.0].048 (1.22) (1.63) PIN - SODER MOUNT 4-FINGER COSED ENTRY CONTCT.213 [5.4].180 [4.6].098 [2.5] 6-FINGER COSED ENTRY CONTCT.165 [4.2].125 [3.2].170 [4.3].120 [3.1].018 [0.46].065 (1.65) (2.08) PIN - SODER MOUNT.065 (1.65) (2.08) PIN - SODER MOUNT.084 (2.13) (2.6) PIN - PRESS-FIT.096 [2.5] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (2.6) RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (2.26).140 [3.6] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (2.6).070 [1.78].122 [3.1] MICRO JCKS.118 [3.0].140 [3.6] KNUR.142 [3.6] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia B 1641C.122 (3.1).032 (.81) (1.17) PIN - CRIMP BRRE JCK 4-FINGER COSED ENTRY CONTCT.090 [2.3] DI.031 [0.8].077 [2.0].086 [2.2].105 [2.7] DI.200 [5.1].075 [1.9] RoS NON-RoS GOD/GOD TIN/TIN TIN/GOD CT. NO. CT. NO. CT. NO [5.7].306 [7.8] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (3.7) 4-FINGER COSED ENTRY CONTCT [1.52].193 [4.1] [4.9] IC SOCKET CONTCTS FOR.015 (.38).025 (.64) EDS PRESS-FIT.072 [1.83].031 [0.80].101 [2.6].053 [1.35].025 [0.63] SQURE RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. ength Dia (9.2) (13.0) (1.45) RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia B 1640C.138 (3.5) 4-FINGER COSED ENTRY CONTCT [1.52] [5.2] [4.1].072 [1.83].031 [0.80].101 [2.6].053 [1.35] RoS NON-RoS Mtg. GOD/GOD TIN/TIN TIN/GOD ole CT. NO. CT. NO. CT. NO. Dia (1.45) RoS COMPINT ~ ISO 9001 CERTIFIED 99

106 MICRO PINS Precision engineered and manufactured Space saving design for high density packaging Micro pins are available in.017 (.43) to.080 (2.03) diameters Ideal for mating with our standard line of micro jacks vailable for press-fit, swage or solder mounting Custom micro pins manufactured to your specifications Other platings available upon request SPECIFICTIONS Material: Brass, STM-B16 Plating: Gold: per MI-G Tin: to per MI-T-10727, Type 1 RoS (RoS Compliant) DS NUMBERS ( Dimension) -1 for.032 (.81) thick Board -2 for.062 (1.57) thick Board -3 for.093 (2.36) thick Board -4 for.125 (3.2) thick Board Example: for.032 (.81) thick Board for.062 (1.57) thick Board.017 (.43) PIN -SWGE MOUNT.017 (.43) PIN - SODER MOUNT.018 (.46) PIN - PRESS-FIT.018 (.46) PIN- PRESS-FIT.186 [4.7].049 [1.24].017 [0.43].078 [1.98].030 [0.76].017 [0.43].173 [4.4].039 [0.99].061 [1.55].016 [0.41].019 [0.48].145 [3.7].028 [0.71] KNUR.018 [0.46].045 [1.14].020 [0.51].045 [1.14].180 [4.6].080 [2.03].018 [0.46].028 [0.71] KNUR.020 [0.51].032 [0.81] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.0) (1.32) GOD TIN Mtg. ole CT. NO. CT. NO. Dia (.56) GOD TIN Mtg. ole CT. NO. CT. NO. Dia (.66) MTERI: Phosphor Bronze GOD TIN Mtg. ole CT. NO. CT. NO. Dia (.66) MICRO PINS.018 (.46) PIN - PRESS-FIT.155 [4.0].029 [0.72] PENTGON.018 [0.46].056 [1.42].030 [0.76].060 [1.52] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (.66).018 (.46) PIN - PRESS-FIT.020 (.51) PIN - PRESS-FIT.018 [0.46].060 [1.52].019 [0.48] SQURE GOD TIN Mtg. ole CT. NO. CT. NO. Dim. Dia (6.2) (3.6) (.56).295 [7.5].049 [1.24] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.01).020 [0.51].038 [0.97].016 [0.41].055 [1.40].020 (.51) PIN - SODER MOUNT.020 [0.51].020 [0.51].045 [1.14].020 [0.51].100 [2.6] GOD TIN Mtg. ole CT. NO. CT. NO. Dim. Dia (6.4) (10.8) (.61).020 (.51) PIN - SWGE MOUNT.020 (.51) PIN - SWGE MOUNT.024 (.61) PIN - SWGE MOUNT.025 (.64) PIN - SWGE MOUNT.225 [5.7].031 [0.79].020 [0.51].050 [1.27].010 [0.25].051 [1.30].050 [1.27].027 [0.68].020 [0.51].050 [1.27].010 [0.25].213 [5.4].030 [0.76].024 [0.61].060 [1.52].025 [0.64].156 [4.0].058 [1.47].025 [0.64].078 [1.98].030 [0.76] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (.89) GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1) (.78) GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.2) (1.9) (.89) GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.6) (2.4) (1.57).025 (.64) PIN - SWGE MOUNT.025 (.64) PIN - SWGE MOUNT.025 (.64) PIN - SWGE MOUNT.025 (.64) PIN - SWGE MOUNT.100 [2.6].047 [1.19].025 [0.64].062 [1.57].021 [0.53] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1) (1.32).047 [1.19].025 [0.64].062 [1.57].021 [0.53] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1) (1.32).025 [0.64].062 [1.57].025 [0.64].065 [1.64].040 [1.02] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.09).025 [0.64].062 [1.57].150 [3.8].025 [0.64].040 [1.02] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1).043 (1.09) (2.9) 100 RoS COMPINT ~ ISO 9001 CERTIFIED

107 .025 (.64) PIN - SWGE MOUNT.030 (.76) PIN - SWGE MOUNT MICRO PINS.031 (.79) PIN- SODER MOUNT.032 (.81) PIN- SWGE MOUNT.025 [0.64].062 [1.57].437 [11.1].062 [1.57].094 [2.39].047 [1.19] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.32).030 [0.76].094 [2.39].020 [0.5].062 [1.57] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1).067 (1.70) (2.9).320 [8.2].031 [0.79].070 [1.78].020 [0.51].028 [0.71].040 [1.02] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.09).342 [8.7].187 [4.8].050 [1.27].032 [0.81].050 [1.27] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1) (1.32).078 [1.98].030 [0.76].035 (.90) PIN- SWGE MOUNT.040 (1.0) PIN - SWGE MOUNT.040 (1.0) PIN - SWGE MOUNT.040 [1.02].035 [0.90].094 [2.39].030 [0.75].022 [0.56].172 [4.4].040 [1.02].130 [3.30].070 [1.78].400 [10.2].020 [0.51].062 [1.55].072 [1.83].040 [1.02].040 (1.0) PIN - SWGE MOUNT.040 [1.02].070 [1.78].320 [8.2].020 [0.51].058 [1.45] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.57).040 (1.0) PIN - SWGE MOUNT.270 [6.9].058 [1.47] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.57).040 [1.02].093 [2.36].030 [0.76] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1).076 (1.93) (2.9).040 (1.0) KY PIN - PRESS-FIT.040 [1.02].080 [2.03].047 [1.19] KNUR CT. NO [1.27].040 [1.02] MTERI: Solid Nickel Silver.193 [4.9].020 [0.51].250 [6.4].832 [21.2] Mtg. ole.043 (1.09) Dia..040 [1.02] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1) (1.09).040 (1.0) OOW PIN - SWGE MOUNT.052 [1.32].075 [1.91].040 [1.02] TIN Mtg. ole CT. NO. Dia (1.50).312 [7.9].115 [2.9].458 [11.7].040 [1.02] GOD TIN Mtg. ole CT. NO. CT. NO. ength Dia (1.3) (2.1).043 (1.09) (2.9).050 (1.3) PIN - SWGE MOUNT.060 [1.52] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.63).063 (1.6) PIN - SWGE MOUNT.080 (2.0) PIN - SWGE MOUNT.080 (2.0) PIN - SWGE MOUNT.080 (2.0) PIN - SWGE MOUNT.050 [1.27].094 [2.39].031 [0.79].094 [2.39] MICRO PINS.080 [2.03].080 [2.03].457 [11.6].063 [1.60].093 [2.36].057 [1.45].098 [2.5].194 [5.0].042 [1.07].300 [7.6].105 [2.7].530 [13.5].080 [2.03].156 [4.0].030 [0.76].082 [2.08].090 [2.29] B.025 [0.64].063 [1.60] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (1.70).090 [2.29] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (2.38).090 [2.29] GOD TIN Mtg. ole CT. NO. CT. NO. Dia (2.38) GOD TIN B CT. NO. CT. NO. Dim. Dia. ength (8.5).156 (4.0).051 (1.3) (10.2).125 (3.2).094 (2.4) (10.2).125 (3.2).125 (3.2) (10.2).125 (3.2).156 (4.0) INSUTED SORTING PUG.120 [3.1] W.062 [1.57].500 [12.7].040 (1.0) PINS SORTING PIN.040 [1.0] DI WIRE.261 [6.7] INSUTED SORTING JCK.120 [3.1] W.062 [1.57].500 [12.7].181 [4.6] BUE RED BCK W CT. NO. CT. NO. CT. NO. Dim. Dim R 1460B.200 (5.1).375 (9.5) R 1461B.250 (6.4).375 (9.5) R 1462B.400 (10.2).620 (15.7) R 1463B.500 (12.7).620 (15.7).040 [1.02] MTERI: Insulator: Polypropylene Blue, Red or Black Pin: Brass, Gold Plate Non-insulated CT. NO. Dim (5.1) (6.4) (10.2) (12.7) MTERI: Pin: Brass, Gold Plate RoS COMPINT ~ ISO 9001 CERTIFIED For.040 (1.0) Pins MTERI: BUE RED BCK W Insulator: Polypropylene CT. NO. CT. NO. CT. NO. Dim. Dim. Blue, Red or Black R 1487B.200 (5.1).375 (9.5) Spring: Beryllium R 1400B.400 (10.2).620 (15.7) Copper, Gold Plate 101

108 STRIN REIEF UG CRIMPS TO WIRE INSUTION PONO PUGS Mates with.125 (3.2) diameter jacks CONVENTION TYPE CRIMP OR SODER TYPE EXTR ONG NDE.130 [3.3].562 [14.3].500 [12.7] MX [33.0] MX..156 [4.0].562 [14.3].500 [12.7] MX..750 [19.1] [27.0].175 [4.5].562 [14.3].500 [12.7] MX..312 [7.9] CT. NO. 565 MTERI: Shell: Steel, Tin Plate Pin: Brass, Nickel Plate MTERI: CT. NO. 561 Shell: Brass, Nickel Plate Pin: Brass, Nickel Plate CT. NO. 567 MTERI: Shell: Steel, Tin Plate Pin: Brass, Nickel Plate PONO JCKS & PUGS CT. NO. 911 SNP-FIT PC MOUNT ow profile Snap-fit mounting for positive retention during wave soldering Rugged, stable construction facilitates reliable mating igh reliability, manufactured using Nickel Plated Brass bodies and Tin Plated Phosphor Bronze contacts Supplied with washer and nut MTERI: Shell: Steel, Tin Plate Body: Brass, Nickel Plate Contacts: Brass, Tin Plate F FEME CONNECTOR.421 [10.7].469 [11.9].260 [6.6].098 [2.5] MX. (3) PS.467 [11.9].425 [10.8].105 [2.7] (3) PS.062 [1.57].936 [23.8].669 [17.0].531 [13.5].157 [4.0] TRED.039 [.99].169 [4.3].232 [5.9].400 [10.2] Mates with.125 (3.12) dia. pin Mounts to panel in.296 (7.6) dia. hole.830 [21.1].375 [9.6] ROUND BSE.350 [8.9].260 [6.6].437 [11.1] CT. NO. INSUTOR COOR 598 WITE 580 RED 574 BCK 599 YEOW.328 [8.4].062 [1.57] TRED COOR KEYED - PC PONO JCKS Mates with.125 (3.2) diameter pins Features a normally closed circuit Various colors for circuit identification Snap-fit mounting for positive retention during wave soldering PNE MOUNT PONO JCKS MTERI: Brass, Nickel Plate Color coded for ease of identification Complete with nut and solder lug.830 [21.1].375 [9.5] EX. EX BSE.350 [8.9].260 [6.6].437 [11.1].328 [8.4] TRED CT. NO. INSUTOR COOR 581 WITE 582 RED 576 BCK 583 YEOW SCEMTIC.062 [1.57].512 [13.0].453 [11.5] CT. INSUTOR NO. COOR 970 WITE 971 RED 972 BCK 973 YEOW.394 [10.0] TO CCEPT PIN.256 [6.5].075 [1.91].295 [7.5].354 [9.0].327 [8.3].413 [10.5].551 [14.0] [4.0] [8.0].209 [5.3].098 [2.5] SPECIFICTIONS ousing: PBT Ground Terminal:.020 (.51) Brass, Nickel Plate ➀ Spring Contact:.012 (.30) Phosphor Bronze, Silver Plate ➂ Shunt Terminal:.016 (.41) thick Brass, Silver Plate ➃ 3 (TOP VIEW).315 [8.0].256 [6.5].295 [7.5].157 [4.0].078 [1.98] (2) PS [9.8] [2.08] (3) PS [5.3] [2.29] 102 RoS COMPINT ~ ISO 9001 CERTIFIED

109 90 PC PONO JCK SNP-FIT 90 PC PONO JCKS Complete one piece jack for insertion into PC board. Time Saving. No Wiring Required. COICE OF TIN OR GOD PTE Complete one piece jack for insertion into PC board. Time Saving. No Wiring Required. Snap-fits into PC board. Black insulator ring..570 [14.5].320 [8.2].570 [14.5].328 [8.4].598 [15.2].560 [14.2].415 [10.6].465 [11.8].257 [6.6].328 [8.4].571 [14.5].265 [6.8].218 [5.6] MTERI: Base: Steel, Tin Plate Shell: Steel, Nickel Plate Contact: Brass, Tin Plate CT. NO. 902 Red insulator ring CT. NO [3.1].050 [1.27].378 [9.6].878 [22.3].060 [1.52].107 [2.7] (2) PS.546 [13.9] SNP-FIT VERTIC PC JCK MTERI: Shell: Steel, Tin Plate Contact: Brass, Tin Plate Snaps into holes on PC board and firmly held for soldering No staking required.328 [8.4].297 [7.6].390 [9.9].410 [10.4] VERTIC.162 [4.1].096 [2.44].062 [1.6] For applications requiring staking to product.414 [10.6].261 [6.6].100 [2.6] (2) PS.285 [7.3].130 [3.3].070 [1.8].420 [10.7].085 [2.2] (2) PS.160 [4.1] MTERI: Shell: Steel Contact: Brass Plating: Tin or Gold.050 [1.27].465 [11.8].255 [6.5].105 [2.7] (3) PS.062 [1.57].100 [2.6] (3) PS ORIZONT Mounted on bracket ready for insertion into pre-drilled holes Solder lug allows remote attachment of signal to PC board.400 [10.2] Extra long, one piece shell to accept plugs with longer pins for greater contact Snaps into holes on PC board and firmly held for soldering No staking required CT. INSUTOR NO. COOR 584 WITE 577 RED 585 BCK 586 YEOW PC PONO JCKS TIN PTE INSUTOR GOD PTE CT. NO. COOR CT. NO. 587 WITE RED BCK YEOW 938 SNP-FIT VERTIC PC PONO JCKS.843 [21.4].400 [10.2] MTERI: Shell: Steel, Nickel Plate Contact: Brass, Tin Plate.328 [8.4].655 [16.7].050 [1.27].420 [10.7].075 [1.90].875 [22.2].070 [1.78] (2) PS.090 [2.29].085 [2.16] (2) PS PC PONO JCKS.328 [8.4].438 [11.1].656 [16.7] MIN. White insulator ring.656 [16.7].500 [12.7].312 [7.9].554 [14.1].105 [2.7] (2) PS Red insulator ring.656 [16.7].250 [6.4].187 [4.8].328 [8.4].100 [2.6] (2) PS.344 [8.8] MTERI: Shell: Steel, Tin Plate Contact: Brass, Tin Plate CT. NO [1.14] (2) PS.500 [12.7].156 [4.0] MTERI: Shell: Steel, Tin Plate Contact: Brass, Tin Plate CT. NO. 571 RoS COMPINT ~ ISO 9001 CERTIFIED.105 [2.7].343 [8.7] 103

110 FUY INSUTED DEUXE TIP JCK CCEPTS.080 (2.0) TIP WIT COSED ENTRY CONTCT Fully molded body with recessed closed entry design. ssures maximum retention with.010 maximum contact resistance. Prevents accidental insertion of larger diameter probes. Current rating: 10 mps. Breakdown voltage 5700V RMS. Capacitance to metal panel 2.0 pf nominal. Supplied with nut. FUY INSUTED STNDRD TIP JCK CCEPTS.080 (2.0) TIP Economical tip jacks with molded Nylon body. ow contact resistance. Formed Phosphor Bronze contact with solder hole for ease in attaching wire. Current rating 10 mps. Breakdown voltage 5700 VRMS. Capacitance to metal panel 3.8 pf. Supplied with nut..188 [4.8].750 [19.1].562 [14.3].375 [9.5] NUT.188 [4.8].844 [21.5].562 [14.3].375 [9.5] NUT.375 [9.5] NUT TRED.209 [5.3].375 [9.5] NUT TRED.209 [5.3] MTERI: Body: Molded Nylon STM D4066 Contact: Beryllium Copper, Silver Plate Terminal: Brass, Tin Plate MET-CD TIP JCK (MI) CCEPTS.080 (2.0) TIP WIT COSED ENTRY CONTCT CT. NO. COOR 6030 WITE 6031 RED 6032 BCK 6033 GREEN 6034 YEOW 6035 BUE CCEPTS.080 (2.0) TIP MTERI: Body: Molded Nylon STM D4066 Contact: Phosphor Bronze, Tin Plate MET-CD TIP JCK (STD) CCEPTS.080 (2.0) TIP CT. NO. COOR 6018 WITE 6019 RED 6020 BCK 6021 GREEN 6022 YEOW 6023 BUE UNINSUTED TIP JCK PUGS & JCKS igh quality tip jack for high reliability industrial applications. Ideal for use where required to withstand severe environmental conditions, temperature, vibration and salt spray. Recessed closed entry contact. Current rating 10 amps. Breakdown voltage: 5700V RMS. Made to MI-C39024/10. Capacitance to metal panel 2.0 pf. Supplied complete with hardware..312 [7.9] EX..281 [7.2] MTERI: Body: Molded Nylon STM D4066 Shell & Nut: Brass QQ-B-626, Nickel Plate QQ-N-290 Contact: Beryllium Copper for QQ-C-533. Gold Plate MI-G [4.0].812 [20.6] SPRING CONTCT TO CCEPT.080 [2.03] PIN Molded Nylon body with metal jacket. Contact is formed from phosphor bronze contact with solder hole for ease in attaching wire. Designed for positive contact, easy insertion and withdrawal. Current rating: 10 mps. Breakdown voltage 5700V RMS. Capacitance to metal panel 3.8 pf. Supplied with nut. MTERI: Body: Molded Nylon STM D4066 Shell: Brass, Nickel Plate Contact: Phosphor Bronze, Silver Plate Quality, precision machined tip jack made of brass. Ideal for use on metal panels where grounding is required. Fits panels up to.375 (9.5) Thick. Supplied with nut. MTERI: Body: Brass, Nickel Plate Contact: Beryllium Copper Current Rating: 15 mps SODER TIP PUGS SODERESS TIP PUGS STNDRD PONE TIP.080 (2.0) DIMETER TIP Designed for miniaturization where space is critical. Solder lead connection. Maximum reliability with minimum contact resistance. Base of tip is recessed to eliminate shock or grounding. Fits all standard jacks. MTERI: Tip: Brass, Nickel Plate andle: Nylon 6/6 Current Rating: 10 mps..632 [16.1].395 [10.1] TRED.343 [8.7] EX. NUT OCKWSER CT. NO. COOR 6012 WITE 6013 RED 6014 BCK 6015 GREEN 6016 YEOW 6017 BUE.156 [4.0].281 [7.2] ] EX..906 [23.0].632 [16.1].395 [10.1] NUT TRED.375 [9.5] NUT CT. NO. COOR 6024 WITE 6025 RED 6026 BCK 6027 GREEN 6028 YEOW 6029 BUE CT. NO [7.9] EX..281 [7.2] SPRING CONTCT TO CCEPT.080 [2.03] PIN.093 [2.4].080 (2.0) DIMETER TIP.080 (2.0) DIMETER TIP Fully insulated molded nylon sleeve. Maximum reliability with minimum contact resistance. Recessed metal head eliminates possibility of shock or grounding. Designed for solderless connection of up to 16 gauge stranded wire which fits through handle and tip and is secured by screwing handle tight. Fits all standard tip jacks. MTERI: Tip: Brass, Nickel Plate andle: Nylon 6/6 Current Rating: 10 mps..812 [20.6].593 [15.1] TRED.375 [9.5] EX. NUT ccepts up to 12 gauge wire. Fits all standard tip jacks. MTERI: Brass, Nickel Plate.070 [1.78] TO CCEPT WIRE..875 [22.2].328 [8.4].156 [4.0] TO CCEPT WIRE..875 [22.2].500 [12.7] [25.4].500 [12.7].187 [4.8].113 [2.9].080 [2.03].375 [9.5].080 [2.03].156 [4.0].080 [2.03] CT. NO. COOR CT. NO. COOR CT. NO. COOR CT. NO. COOR 6006 WITE 6009 GREEN 6000 WITE 6003 GREEN 6007 RED 6010 YEOW 6001 RED 6004 YEOW 6008 BCK 6011 BUE 6002 BCK 6005 BUE CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED

111 VERTIC.080 [2.0] PC TEST JCKS SNP-FIT VERTIC SPRING CONTCT TO CCEPT.080 [2.03] PIN SPRING CONTCT TO CCEPT.080 [2.03] PIN.187 [4.8].187 [4.8] MTERI: Body: Nylon per STM D4066 Contact: Brass, Silver Plate.312 [7.9].048 [1.2] CT. NO. COOR 6036 WITE 6037 RED 6038 BCK 6039 YEOW 6040 GREEN 6041 BUE MTERI: Body: Nylon per STM D4066 Contact: Beryllium Copper, Silver Plate Mounting: Snap-fits into.052 (1.32) hole.312 [7.9].039 [0.99] x.045 [1.14] CT. NO. COOR 6042 WITE 6043 RED 6044 BCK 6045 YEOW 6046 GREEN 6047 BUE OW PROFIE ORIZONT UNIVERS ORIZONT MINITURE ORIZONT.220 [5.6] D SPRING CONTCT TO CCEPT.080 [2.03] PIN.460 [11.7].008 [.20].400 [10.2] GOD PTE SIVER PTE CT. NO. COOR CT. NO WITE RED BCK YEOW GREEN BUE 6071 IG TEMPERTURE PTFE INSUTED TEST POINT JCKS C.133 [3.4].156 [4.0].130 [3.3].048 [1.2] MTERI: Body: Nylon per STM D4066 Contact: Beryllium Copper, Gold or Silver Plate SPECIFICTIONS Terminal Jack: Beryllium Copper (QQ-C-533) *Brass STM B16 Plating: Gold per MI-G-45204, Type II Operating Tempuature: -60 (-50) to C.203 [5.2] CT. NO. COOR 6054 WITE 6055 RED 6056 BCK 6057 YEOW 6058 GREEN 6059 BUE SPRING CONTCT TO CCEPT.080 [2.03] PIN.156 [4.0].410 [10.4].008 [.20].400 [10.2] Bushing: White PTFE.133 [3.4] MTERI: Body: Nylon per STM D4066 Contact: Beryllium Copper, Silver Plate.125 [3.2].048 [1.2] RoS (RoS Compliant) Red or Black PTFE RoS (Non-RoS Compliant) CT. NO. COOR 6048 WITE 6049 RED 6050 BCK 6051 YEOW 6052 GREEN 6053 BUE C SPRING CONTCT TO CCEPT.080 [2.03] PIN.203 [5.2] B.208 [5.3].008 [.20].200 [5.1].133 [3.4].055 [1.4].147 [3.7].047 [1.2] (2) PS. D.125 [3.2].048 [1.2] MTERI: Body: Nylon per STM D4066 Contact: Beryllium Copper, Silver Plate.200 [5.1] TEST JCKS B R E FIG. 1 FIG. 2 FIG. 3 R E RoS NON-RoS ccepts White Red Black Tip Dia. Tip CT NO. CT NO. CT NO. FIG. B C D E R ±.001 (.03) ength R B (3.6).120 (3.0).244 (6.2).046 (1.2).120 (3.0).060 (1.5).040 (1.0).205 (5.2) R B (3.6).120 (3.0).283 (7.2).046 (1.2).120 (3.0).060 (1.5).040 (1.0).245 (6.2) R B (4.4).140 (3.6).142 (3.6).050 (1.3).060 (1.5).080 (2.0).040 (1.0).125 (3.2) R B (4.4).148 (3.8).179 (4.5).046 (1.2).120 (3.0).060 (1.5).040 (1.0).140 (3.6) R B (5.5).185 (4.7).301 (7.6).050 (1.3).105 (2.7).125 (3.2).080 (2.0).315 (8.0) R B (5.5).185 (4.7).271 (6.9).046 (1.2).120 (3.0).074 (1.9).080 (2.0).195 (4.9) R B (5.5).185 (4.7).271 (6.9).046 (1.2).120 (3.0).074 (1.9).090 (2.3).195 (4.9) R B (5.5).185 (4.7).301 (7.6).046 (1.2).120 (3.0).074 (1.9).080 (2.0).225 (5.7) R B (5.5).185 (4.7).400 (10.2).050 (1.3).187 (4.8).074 (1.9).080 (2.0).280 (7.1) R B (5.5).185 (4.7).271 (6.9).046 (1.2).136 (3.5).074 (1.9).080 (2.0).340 (8.6) R B (5.5).430 (10.9).150 (3.8).050 (1.3).080 (2.0).200 (5.1) 11012* R* B* (5.5).500 (12.7).150 (3.8).050 (1.3).080 (2.0).280 (7.1) R B (5.5).187 (4.8).689 (17.5).500 (12.7).125 (3.2).050 (1.3).080 (2.0).500 (12.7) R B (5.5).187 (4.8).378 (9.6).400 (10.2).125 (3.2).050 (1.3).080 (2.0).250 (6.4) R B (5.5).187 (4.8).378 (9.6).400 (10.2).187 (4.7).035 (.89).080 (2.0).250 (6.4) R B (5.5).187 (4.8).378 (9.6).500 (12.7).125 (3.2).050 (1.3).080 (2.0).250 (6.4) * Terminal Material: Brass STM B16 E D.140 [3.6] R RoS COMPINT ~ ISO 9001 CERTIFIED 105

112 STNDRD SODERESS SODERESS CONNECTION SODERESS WIT SET SCREW SODERESS CONNECTION.375 [9.5].375 [9.5].375 [9.5].156 [4.0] TO CCEPT WIRE..160 [4.1].093 [2.36] x.328 [8.33] DEEP TO CCEPT WIRE..228 [5.8].187 [4.8].175 (4.5) Plug.875 [22.2] [25.4] 2-56 x.187 [4.8]. SCREW SODER INSERT 6080 / 6081 ONY CRIMP OE 6082 / 6083 ONY [25.4].175 (4.5) Plug.281 [7.2].175 (4.5) Plug.312 [7.9] EX.608 [15.5].531 [13.5].562 [14.3].812 [20.6].562 [14.3] BNN PUGS MTERI: Spring: Nickel Silver Body: Brass, Nickel Plate andle: Nylon.175 (4.5) Plug MTERI: Spring: Beryllium Copper Body: Brass, Nickel Plate CT. NO [7.9].500 [12.7].175 [4.5] CT. NO. COOR 6078 RED 6079 BCK 8-32 TRED.093 [2.36].437 [11.1].175 [4.5] MTERI: Spring: Nickel Silver Body: Brass, Nickel Plate andle: Nylon.175 [4.5] CT. NO. COOR 6084 RED 6085 BCK EXTERN TRED [5.6] TRED.109 [2.8].175 (4.5) Plug.175 [4.5] MTERI: Spring: Beryllium Copper (Cat. No. 653) Spring: Phospor Bronze (Cat. No. 654, 655) Body: Brass, Nickel Plate CT. NO (27.0).500 (12.7).437 (11.1) (24.7).188 (4.8).550 (14.0) (31.8).500 (12.7).550 (14.0) MTERI: Spring: Phosper Bronze Body: Brass, Nickel Plate andle: Nylon SODER UG FOUR EF SPRING BRRE SPRING STNDRD RIVET INTERN TRED.175 (4.5) Plug 6-32 TRED.750 [19.1] MTERI: Spring: Beryllium Copper Body: Brass, Nickel Plate CT. NO [4.5] RED BCK CT. NO. CT. NO. WIRE CONNECTION SODER SODERESS.093 [2.4].375 [9.5].550 [14.0].175 [4.45] [31.8] EXTERN TRED.175 (4.5) Plug.098 [2.49] x.093 [2.36] DEEP.187 [4.8].135 [3.5] TRED TRED 106 MTERI: Four eaf Spring: Phosphor Bronze, *Barrel Spring, Beryllium Copper Body: Brass, Nickel Plate.175 [4.5] CT. NO. SPRING (4.7).437 (11.1) 4 leaf (4.7).550 (14.0) barrel (5.5).437 (11.1) 4 leaf Supplied with screw and lug Unassembled MTERI: Four eaf Spring: Phosphor Bronze, *Barrel Spring, Beryllium Copper Body: Brass, Nickel Plate CT. NO. D TRED SPRING (4.4).531 (13.5).960 (24.4) leaf 659*.175 (4.4).550 (14.0).960 (24.4) 6-32 barrel (5.5).437 (11.1) (28.4) leaf RoS COMPINT ~ ISO 9001 CERTIFIED D Supplied with nut and lug Unassembled MTERI: Spring: Phosphor Bronze Body: Brass, Nickel Plate CT. NO. D TRED (4.5) (13.5) (28.6).375 (9.5) (4.5) (13.5) (38.1).750 (19.1) (7.5).750 (19.1) (44.5).625 (15.9) 1/4-28 D

113 SWGE MOUNT MINITURE PUGS TREDED SODER CONNECTION.190 [4.9].153 [3.9].187 [4.8].078 [1.98].187 [4.7] 2-56 TRED.276 [7.0].050 [1.27] TO CCEPT WIRE..104 [2.7].440 [11.2].120 (3.0) Plug.110 [2.8].094 [2.39].603 [15.3].290 [7.4].110 [2.8].287 [7.3].120 (3.0) Plug.480 [12.2].290 [7.4].120 [3.1].120 [3.0].120 [3.1] MTERI: CT. NO. 452 Spring: Beryllium Copper Body: Brass, Silver Plate CT. NO. 450 ccepts.175 (4.5) Plug Supplied with hardware Unassembled CT. ED NO. COOR 6093 RED 6094 BCK INSUTED SODER CONNECTION.163 [4.2] TRU.437 [11.1].156 [4.0].500 [12.7] TRED FUY INSUTED.562 [14.3] MODED EX ED FT WSER SOUDER WSER TERMIN NUT MTERI: Body: Brass, Nickel Plate Terminal: Copper, Tinned ex ead: Phenolic ccepts.175 (4.5) Plug CT. NO BNN JCKS NON-INSUTED RECESSED ED Fits panel up to.312 (7.9) Supplied with nut and lug. Unassembled.375 [9.5].406 [10.3] TRED Fits panel up to.375 (9.6) MTERI: Spring: Beryllium Copper, Nickel Plate Body: Brass, Silver Plate.163 [4.2] TRU NON-INSUTED STNDRD ED NUT.093 [2.36] TERMIN MTERI: Current Rating: 15 mps Body: Brass, Nickel Plate Terminal: Brass, Tin Plate CT. NO. COOR 6076 RED 6077 BCK 451 NONE ccepts.120 (3.0) Plug CT. NO ccepts.120 (3.0) Plug MTERI: Spring: Beryllium Copper, Nickel Plate Body: Brass, Nickel Plate andle: Nylon NON-INSUTED MINITURE JCK MINITURE.106 [2.7] TRU.312 [7.9] EX. Supplied with lug and nut. Unassembled NON-INSUTED.550 [14.0].062 [1.57] TERMIN NUT TRED MTERI: Body: Brass, Nickel Plate Terminal: Copper, Tinned STNDRD ccepts.175 (4.5) Plug BNN PUGS & JCKS ccepts.175 (4.5) Plug CT. NO. COOR 6091 RED 6092 BCK.937 [23.8].187 [4.8].468 [11.9].234 [6.0].433 [11.0] NUT TRED.093 [2.36].182 [4.6] Supplied with nut and lug. MTERI: Unassembled Body: Nylon Contact: Brass, Tin Plate CT. NO ccepts.175 (4.5) Plug.375 [9.5] NUT.312 [7.9].500 [12.7] TRED.163 [4.2] TRU MTERI: Current Rating: 15 mps Body: Brass, Nickel Plate Terminal: Brass, Tin Plate RoS COMPINT ~ ISO 9001 CERTIFIED.125 [3.2] NUT TERMIN.218 [5.6].135 [3.5].106 [2.7] TRU MTERI: Brass, Tin Plate CT. NO (3.2) (4.2) (4.7 ).075 [1.91].312 [7.9].203 [5.2].163 [4.2] TRU.093 [2.36] MTERI: Brass, Nickel Plate CT. NO (5.5) (6.7) (8.9) 107

114 UDIO JCKS & BINDING POSTS Mates with 2.5mm and 3.5mm plugs Designed for reliable interface with audio equipment including computer speakers, headphones, sound cards, cell phones, etc. Models available for mono and stereo applications ow profile, surface mount design.158 [4.0].020 [0.51].157 [4.0] [2.8].473 [5.5] [12.0].039 [0.99] (5) PS [9.0].472 [12.0] CT. NO. 980TR (Stereo) CT. NO. 982TR (Mono) [1.50] ll Keystone binding posts are designed to prevent accidental contact with current carrying parts. They feature a limited opening captivated head to insure safety. Ideal for audio circuitry, R.F. circuitry, oscilloscopes, power supplies and various other applications. MTERI: Stud: Brass per QQ-B-626 Plating: Silver Plate Insulation: Nylon Current Rating: 15 mps Stud to Panel Capacitance: 3.3 pf Nominal [2.6] I. FOR 2.5 mm PUGS.079 [2.01].157 [4.0].295 [7.5] STNDRD BINDING POST.719 [18.3].203 [5.2] MX TRED 4-40 TRED.234 [6.0].086 [2.18].828 [21.1] STNDRD DU EX ED.625 [15.9].920 [23.4] MX..532 [13.5].294 [7.5].157 [4.0].750 [19.1] [35.1] SURFCE MOUNT UDIO JCKS Pad ayout (TOP VIEW).265 [6.8].180 [4.6].110 [2.8] [10.8] [7.5] BINDING POSTS.328 [8.4] For panels up to.281 (7.1) thick CT. NO. COOR 7004 RED 7005 BCK.480 [12.2] EX..093 [2.36] (2) PS TRED.079 [2.01].067 [1.70].118 [3.0].063 [1.60] (2) PS.197 [5.0].088 [2.24] (3) PS Tape Spec s: 24mm wide; 16mm pitch Reel Spec s: 15 inch reel (1,000 pieces per reel) SUPPIED ON TPE ND REE STEREO SCEMTIC MONO SCEMTIC [5.0].039 [1.0].110 [2.8] [6.1] [15.0] [9.0].039 [0.99] (3) PS.197 [5.0] These multi-purpose binding posts feature high current rating, captivated heads and anti-rotation stud mounting. Note: Binding Posts accept.175 (4.5) Banana Plugs,.080 (2.08) Tip Plugs, Spade ugs, lligator Clips, Wires and EZ hooks. MTERI: Stud: Brass per QQ-B-626 Plating: Nickel Plate Insulation: Nylon Current Rating: 15 mps, 1000V C Working [9.5].472 [12.0] CT. NO. 981TR (Stereo) CT. NO. 983TR (Mono) SPECIFICTIONS ousing: Polyamide, U Rated 94V-0 Ground Terminal:.012 (.30) Brass, Gold Flash ➀ Spring Contacts:.008 (.20) Phosphor Bronze, Gold Flash ➁ ➄ Shunt Terminals:.012 (.30) Brass, Gold flash ➂ ➃ UNINSUTED BINDING POST.719 [18.3].203 [5.2] MX TRED STNDRD EX ED.625 [15.9] FOR 3.5 mm PUGS.920 [23.4] MX..059 [1.5] [3.6] I..118 [3.0].193 [4.9].366 [9.3].059 [1.50] (2) PS Tape Spec s: 24mm wide; 16mm pitch Reel Spec s: 15 inch reel (800 pieces per reel).480 [12.2] EX..093 [2.36] TRED.240 [6.1].110 [2.8] [8.0] [13.5].118 [3.00].193 [4.9].423 [10.8].086 [2.18].437 [11.1] Pad ayout 1 (TOP VIEW).354 [9.0] [9.3].079 [2.01] (3) PS.100 [2.6] (2) PS For panels up to.313 (8.0) thick CT. NO. COOR 7006 RED 7007 BCK [1.60] (2) PS.236 [6.0].500 [12.7].468 [11.9] 108 MTERI: Stud: Brass per STM B-16. Insulation: Nylon Current Rating: 30 mps, 1000V C Working.656 [16.7] GOD PTE CT. NO. TRED [19.1].500 [12.7] NICKE PTE CT. NO. TRED MTERI: Stud: Brass per STM B-16. Insulation: Nylon Current Rating: 30 mps, 1000V C Working RoS COMPINT ~ ISO 9001 CERTIFIED GOD PTE CT. NO. TRED COOR RED BCK RED BCK WITE YEOW NICKE PTE CT. NO. TRED COOR RED BCK RED BCK WITE YEOW

115 TRNSISTOR INSUTORS Rapid eat Dissipation igh Dielectric Strength ow Cost These precision stamped mica insulators provide good thermal conductivity:.009 watts per square inch per degree celsius per inch in thickness. Excellent thermal resistance 1100 F. (593 C) Dielectric constant of 7 at 1000 Kz. MTERI:.003 (.08) ±.001 (.02) Thick Mica.521 [13.3].430 [10.9] FOR TO-3 CSES C (2) PS CT. NO. B C D (41.3) (27.8).093 (2.36).166 (4.2) (39.6) (26.7).203 (5.15).171 (4.4) (42.1) (27.0).166 (4.2).166 (4.2) (42.1) (27.0).052 (1.32).166 (4.2) (42.1) (27.0).270 (6.9).166 (4.2) CT. ID OD For Screw NO. Inside Dia. Outside Dia. Size (3.1).375 (9.5) (3.7).375 (9.5) (4.3).500 (12.7) (5.0).625 (15.9) (6.6).750 (19.0) 1/ (8.3).875 (22.2) 5/16 FOR TO-220 CSE CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QTY Screw 1 B 4672 Mica Insulator 1 C 3049 Shoulder Washer 1 E 4693 ockwasher 1 G Nut 1 These pre-packaged universal mounting kits provide all the necessary hardware and insulators required to securely mount the semiconductor to the chassis. Purchase the complete kit consisting of all hardware included in one package. Your choice of individual items available in 100 piece packages. Semiconductors customer supplied [30.2] B D (2) PS FOR TREDED STUD TRNSISTORS O.D. C E G I.D. NOT SUPPIED B.521 [13.3].430 [10.9].380 [9.7] [40.5] [30.2].059 [1.50] W. x.086 [2.18]..055 [1.40].440 [11.2] [25.4].750 [19.1].080 [2.03] (2) PS TRNSISTOR MOUNTING KITS Complete Kits or Individulal ardware Pre-Packaged Uniform ardware at ow Cost CSSIS FOR TO-3 CSE [38.1].960 [24.4] [29.0].142 [3.6] (2) PS.515 [13.1].600 [15.3].140 [3.6] (2) PS CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QTY Screw 2 B 4651 Mica Insulator 1 C 4698 Shoulder Washer 2 D 4699 Metal Washer 2 E 4004 Solder Terminal 1 F 4700 ockwasher 2 G Nut 2 FOR TO-66 CSE RoS COMPINT ~ ISO 9001 CERTIFIED.750 [19.1].166 [4.2] (2) PS.521 [13.2].072 [1.9].105 [2.7].026 [0.66].065 [1.65] (2) PS FOR TO-66 CSES CT. NO CT. NO CT. NO NOT SUPPIED B CSSIS C D E F G CT. NO CT. NO CT. NO CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QTY Screw 2 B 4666 Mica Insulator 1 C 4698 Shoulder Washer 2 D 4699 Metal Washer 2 E 4004 Solder Terminal 1 F 4700 ockwasher 2 G Nut 2 FOR TO-3 CSES [42.1] [30.2] FOR PSTIC CSE.800 [20.3].141 [3.6].580 [14.8].505 [12.9] [27.0].166 [4.2] (4) PS.380 [9.7].045 [1.14] (2) PS.521 [13.3].430 [10.9].580 [14.8].072 [1.9].072 [1.9] [34.9].960 [24.4] (2) PS CT. NO [21.9] [39.7] [30.2].780 [19.8].156 [4.0] (2) PS.065 [1.65] (2) PS.520 [13.2] CT. NO (3.6) (2.9) NOT SUPPIED B C D E CSSIS FOR DO-4, TO-59, TO-60, TO-62 CSES CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QTY Mica Insulator 1 B 4702 Shoulder Washer 1 C 4704 Solder Terminal 1 D 1477 ockwasher 1 E Nut 1 FOR DO-5, TO-48, TO-61 CSES CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QTY Mica Insulator 1 B 4711 Shoulder Washer 1 C 4712 Solder Terminal 1 D 1476 ockwasher 1 E /4-28 Nut [27.0].156 [4.0] (2) PS TRNSISTOR MIC INSUTORS & MOUNTING KITS 109

116 SOCKETS FOR T0-5 & TO-100 Fully molded compact construction. Speeds transistor assembly. Incorporates ultra high quality, closed entry, sleeve type contacts. ccepts.016 (.41) to.020 (.51) diameter leads or.010 (.25).018 (.46) rectangular transistor leads. MTERI: Insulator: Glass Filled Polyester, U Rated 94V-0 Contact Pin: Brass, Tin-ead Plate RoS (Non-RoS Compliant) Contact Spring: Beryllium Copper, min. Gold Plate CT. NO. FOR PINS 4590 TO TO TO TO TO MINI OGEN MP SOCKETS ccepts.022 (.032) to.032 (.81) diameter Pins or eads The Wire Wrap Pins can be easily bent to achieve a variety of positions SPECIFICTIONS Base: Glass Filled CP; Contact: Beryllium Copper, Gold Plate; Shell: Brass, Nickel Plate TRNSISTOR SOCKETS & CCESSORIES Molded barrier insulators functionally replaces up to six pieces of conventional insulation required with previous methods of mounting power transistors. Built-in barrier eliminates need for sleeving of connections. NOTE: #6-20 mounting screw available CT. NO CT. NO [10.0].394 [10.0].230 [5.9] [10.0].394 [10.0].230 [5.9] [2.8].032 [.81] TRU.146 [3.7] MX. PIN DEPT.394 [10.0] Cat. No Cat. No Cat. No Cat. No Cat. No POWER TRNSISTOR MOUNTS MTERI: Nylon 6/6, U Rated 94V-2 CT. NO MTERI: Glass filled Polyester, U Rated 94V-0 CT. NO MTERI: Nylon 6/6, U Rated 94V-2 For TO-3 CSES.375 [9.6] [39.7] [30.2].665 [16.9].140 [3.6] I. (2) PS.375 [9.6] (2) PS.187 [4.8] (2) PS EVY DUTY TO [13.7].187 [4.8] (2) PS.387 [9.9] For TO-66 CSES.140 [3.6] I. (2) PS.187 [4.8] (2) PS.140 [3.6] I. (2) PS.312 [7.9] (2) PS.312 [7.9] [39.7] [30.2].665 [16.9] [32.3].960 [24.4].580 [14.8].562 [14.3].165 [4.2].021 [.53].425 [10.8].050 [1.27] I. (2) PS.112 [2.9] (2) PS.062 [1.57].050 [1.27] I. (2) PS.312 [7.9].425 [10.8].070 [1.78] I. (2) PS.112 [2.9] (2) PS.062 [1.57].508 [12.9].194 [5.0].112 [2.9] (2) PS.062 [1.57].126 [3.2].170 [4.3].160 [4.1].130 [3.3].073 [1.85].170 [4.3].160 [4.1].130 [3.3] CT. NO CT. NO MTERI: Top Plate: Molded Nylon Base: Phenolic Contacts: Brass, Tin Plate Collector Plate: Steel, Tin Plate.470 [12.0] Molded nylon covers easily mount over and insulate the power transistor. Will withstand temperatures to approximately 250 F (107 C). EYEETS CT. NO. FOR INSTED 4632 TO-3 NONE.210 (5.4) 4634 TO-3 TWO.140 (3.6).030 [.76].302 [7.7].812 [20.6].025 [.64] SQURE WIRE WRP PIN TO-3 SOCKET FOR PC BORDS CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED.470 [12.0].015 [.38] TRU-OE.210 [5.4] Easily assembles onto printed circuit board. Eliminates wiring. Stops on PC terminals provide sufficient spacing between socket and PC board to permit proper assembly of transistor to socket. Can be screwed down tightly to heat sink [18.6] [10.9].064 [1.63] (2) PS.665 [16.9].430 [10.9] [38.9] [30.2].665 [16.9].215 [5.5] FORMED TRED FOR #6-20 SCREW (TYPE B) (2) PS Bottom View.234 [6.0].062 [1.57] E [30.2].090 [2.29].204 [5.2] B.920 [23.4].840 [21.4] [40.9] [29.7].156 [4.0] (2) PS NYON TO-3 CSE COVERS MTERI: Nylon 6/6, U Rated 94V [5.6] (2) PS.070 [1.78] (4) PS.100 [2.6].452 [11.5].475 [12.1] [28.6].460 [11.7]

117 Socket and transistor are assembled to chassis at same time, using the minimum amount of hardware. Top molded boss ensure the transistor leads will be isolated from the chassis. Various boss heights available to accommodate different chassis thicknesses [18.6] [10.9] CT. NO [1.63] (2) PS 6-32 TRED (2) PS TB '' [38.9] [30.2].665 [16.9] [40.7] MX [30.2] FORMED TRED FOR #6-20 SCREW (TYPE B) (2) PS.665 [16.9] (2) INSUTING.218 [5.6] SOUDERS.060 [1.52].210 [5.4].028 [0.71] TB 'B' These socket kits provide everything needed to mount a transistor onto a chassis in one kit. Nylon bushings or boss will insulate transistor leads from chassis. Mica insulator isolates transistor from chassis. Two 6-20 screws included to mount transistor. (Transistor not included).450 [11.5].730 [18.6].204 [5.2] x C'BORE.045 [1.14] DEEP.700 [17.8] MX..460 [11.7] SOCKETS FOR TO-3 CSE VRIOUS MODED BOSS EIGTS MTERI: Base: Phenolic, Grade PBE, Type XP Contacts: Brass, Tin Plate Top Plate: Nylon, STM-D4066 Phenolic, Grade PBE, Type XP (Cat. No only) Collector Plate: Steel, Tin Plate CT. NO. DIM (.76) (1.14) (2.29) RoS COMPINT ~ ISO 9001 CERTIFIED Socket is installed onto chassis using eyelets or screws. Transistor is installed afterwards. ssembly and repairs are simplified since socket will stay in place without transistor mounted. Top molded boss or added bushing ensure the transistor leads will be isolated from the chassis. Various boss heights available to accommodate standard chassis thicknesses. Use Cat. No and nylon bushings for special chassis thicknesses..220 [5.6].460 [11.7] FORMED TRED FOR #6-20 SCREW (TYPE B) (2) PS.144 [3.7] (2) PS FUY MODED TO-3 SOCKET Pre-assembling the socket to the chassis by eyelets or rivets permits the installation of the semiconductor at a later stage in the assembly. The molded top boss eliminates hardware. MTERI: Base: Molded Nylon 6/6 Contacts: Brass, Tin Plate Collector Plate: Steel, Tin Plate [31.8].931 [23.7].430 [10.9] B [30.2].521 [13.3] E [27.7] [34.3] [30.2].521 [13.3] EVY DUTY SOCKET FOR TO-3 CSE.325 [8.3] CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QUNTITY screws 2 B 4651 Mica Insulator 1 C 4602 Socket 1 COICE OF SINGE OR DU COECTOR SODER TBS Features an all-in-one mounting plate and solder tabs, providing complete electrical isolation of the solder tab connections. Rated 5 mps DC continuous and 15 mps DC Intermittent MTERI: Base: Glass Filled Polyester, U Rated 94V-0 Contacts: Brass, Tin Plate Collector Plate: Brass, Tin Plate TO-3 CSE MOUNTING KITS CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QUNTITY screws 2 B 4651 Mica Insulator 1 C 4608 Square Socket 1 E B [31.2] [38.1].695 [17.7].430 [11.0] With transistor lead-in insulating shoulders CT. NO. WIT TB 4513 ONY 4514 & B.180 [4.6] [25.4].221 [5.6].430 [10.9] FORMED TRED FOR #6-20 SCREW (TYPE B) (2) PS.136 [3.5] (4) PS CT. NO. DIM NONE (.76) (1.14) (1.52) (3.2).640 [16.3].515 [13.1].344 [8.8].261 [6.7].050 [1.3].140 [3.6] ess transistor lead-in insulating shoulders CT. NO. WIT TB 4515 ONY 4516 & B CT. NO Complete Mounting Kit ITEM CT. NO. DESCRIPTION QUNTITY screws 2 B 4651 Mica Insulator 1 C 4684 Nylon Bushing 4 D 4606 Square Socket 1 TO-3 POWER TRNSISTOR SOCKET & MOUNTING KITS 111

118 PC BORD RDWRE We offer an assortment of standard blank and cutout computer brackets, PCB support brackets, card edge ejectors and guides to provide the right solution for applications such as: Computer Chassis ssembly Electronic Peripheral Equipment Rack Mounted Equipment Printed Circuit Board Mounting Printed Circuit Board Supports Printed Circuit Board insertion and removal To dress up chassis access panels Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application..

119 PC BORD RDWRE SECTION CONTENTS COMPUTER BRCKETS COMPUTER BRCKET WORKSEET CONTCT PINS MOUNTING BRCKETS PC BORD CCESSORIES Board Guides Card Ejectors IC Static Tray Clips PUS-IN TERMINS

120 TREDED MOUNTING BRCKETS 4-40 TRED 4-40 TRED 4-40 TRED.062 [1.57].130 [3.3].343 [8.7].203 [5.2].375 [9.5] 4-40 TRED.250 [6.4].062 [1.57].343 [8.7].203 [5.2] 4-40 TRED.375 [9.5].250 [6.4].047 [1.19].136 [3.5].453 [11.5].265 [6.8].187 [4.8] 4-40 TRED.312 [7.9].250 [6.4] TREDED MOUNTING BRCKETS MTERI: MTERI: CT. NO (1.57) Steel, Zinc Plate CT. NO (1.57) Steel, Zinc Plate CT. NO TRED.032 [.81].140 [3.6].375 [9.5].218 [5.6].218 [5.6] MTERI: CT. NO (.81) Brass, Nickel Plate CT. NO [1.57].562 [14.3].412 [10.5] 6-32 TRED.375 [9.5].420 [10.7].165 [4.2] 6-32 TRED.032 [.81].144 [3.7] 6-32 TRED.343 [8.7] 6-32 TRED 6-32 TRED 6-32 TRED 6-32 TRED.412 [10.5].562 [14.3].281 [7.2].500 [12.7].062 [1.57].625 [15.9] [31.3].437 [11.1].218 [5.6].390 [9.9].312 [7.9] MTERI:.032 (.81) Brass, Tin Plate.130 [3.3] (2) PS MTERI: MTERI: CT. NO (1.57) Steel, Nickel Plate CT. NO (1.57 Steel, Nickel Plate CT. NO OR 8-32 TRED 8-32 TRED 8-32 TRED 6-32 TRED.312 [7.9].200 [5.1] CT. NO [14.7].379 [9.6].328 [8.4] MTERI:.047 (1.19) Brass, Tin Plate 6-32 TRED.299 [7.6] 6-32 TRED.500 [12.7].100 [2.5].062 [1.57].165 [4.2] 6-32 TRED.300 [7.6].500 [12.7].340 [8.6].120 [3.1] MTERI:.032 (.81) Brass, Tin Plate MTERI:.062 (1.57) Steel, Tin Plate.037 [.94].062 [1.57].218 [5.6].531 [13.5].218 [5.6] RDIUS.156 [4.0] TRED.037 [.94].135 [3.5].375 [9.5].234 [6.0] 8-32 TRED [7.9] [19.9].281 [7.2].136 [3.5] (2) PS 8-32 TRED 114 CT. NO. TRED [4.8].500 [12.7].312 [7.9] MTERI:.062 (1.57) Brass, Nickel Plate.422 [10.7].312 [7.9] MTERI: CT. NO (.94) Brass, Tin Plate CT. NO. 631 RoS COMPINT ~ ISO 9001 CERTIFIED.218 [5.6].437 [11.1].375 [9.5] MTERI:.037 (.94) Steel, Tin Plate

121 SNP-IN TREDED PC MOUNT BRCKETS Snaps in for wave soldering Reduces assembly time Easily mount into predrilled or punched holes Stable no rock design For screw selection refer to pages 79 and 123 SNP-IN PC MOUNT 4-40 TRED.214 [5.5] 4-40 TRED 6-32 TRED.180 [4.6].360 [9.2].050 [1.27] (4) PS.214 [5.5].295 [7.5] 6-32 TRED.327 [8.3].295 [7.5].200 [5.1].312 [7.9].512 [13.0].060 [1.52] (4) PS.197 [5.0] MTERI:.032 (.81) Brass, Tin Plate CT. NO CT. D OE E OE T NO. W D DIMETER E DIMETER MTERI FINIS (9.5).375 (9.5).281 (7.1).218 (5.5).140 (3.6).218 (5.5).140 (3.6).032 (.81) Brass Nickel (9.9).453 (11.5).375 (9.5).234 (5.9).147 (3.7).299 (7.6).128 (3.3).032 (.81) Brass Nickel (10.7).343 (8.7).281 (7.1).281 (7.1).144 (3.7).203 (5.2).128 (3.3).032 (.81) Brass Tin (14.3).562 (14.3).500 (12.7).412 (10.5).120 (3.0).411 (10.4).120 (3.0).062 (1.57) Steel Nickel (14.3).562 (14.3).500 (12.7).412 (10.5).144 (3.7).412 (10.5).144 (3.7).062 (1.57) Steel Nickel (16.0).628 (16.0).375 (9.5).378 (9.6).169 (4.3).378 (9.6).169 (4.3).050 (1.27) Brass Tin (17.4).687 (17.4).375 (9.5).500 (12.7).144 (3.7).500 (12.7).144 (3.7).032 (.81) Steel Tin (25.7).487 (12.4).312 (7.9).816 (20.7).140 (3.6).332 (8.4).140 (3.6).050 (1.27) Steel Nickel (29.4).656 (16.7).375 (9.5).906 (23.0).169 (4.3).420 (10.7).169 (4.3).032 (.81) Steel Tin BORD BRCKETS Originally designed for our line of standardized terminal boards; these brackets can also be used in other applications. See pages for Turret Terminal Boards. MTERIS:.062 (1.57) Steel, Nickel Plate CT. NO. W S (7.1) (30.1).750 (19.1) (9.5) (41.3) (25.4) (7.1) (41.3) (30.1) (9.5) (54.0) (38.1) (9.5) (66.7) (50.8) (9.5) (79.4) (63.5) UNIVERS CER OE BRCKETS D.067 [1.7] (4) PS T E D OE E OE S W.218 [5.6].156 [4.0] (2) PS.500 [12.7].203 [5.2] W.197 [5.0].073 [1.85] (4) PS.375 [9.5].156 [4.0] MTERI:.032 (.81) Brass, Tin Plate CT. NO [19.1] CT. NO [13.5].750 [19.1].196 [5.0].560 [14.2].196 [5.0].203 [5.2].328 [8.4] MTERI:.080 (2.03) luminum MOUNTING BRCKETS.250 [6.4] [15.9] [39.7].177 [4.5] (3) PS.187 [4.8].500 [12.7].312 [7.9].128 [3.3].312 [7.9].484 [12.3].375 [9.5].562 [14.3] [3.3] [4.8] [0.8] 6-32 [11.1] TRED.437 [11.1].187 [4.8].156 [4.0].156 [4.0].312 [7.9].281 [7.2] CT. NO MTERI:.062 (1.57) Steel, Nickel Plate CT. NO MTERI:.050 (1.27) Steel, Nickel Plate CT. NO. 630 MTERI:.032 (.81) Brass, Tin Plate RoS COMPINT ~ ISO 9001 CERTIFIED 115

122 EVER CTION PC CRD EJECTORS Card ejectors offer a simple and reliable way of installing and ejecting circuit boards. Card ejectors reduce the stress on board connectors by improper removal of board. Ejectors also protect components on board from damage during removal or installation. Ejectors supplied with stainless steel pin to assure quick assembly of ejector to card. Designed for.062 (1.57) PC cards. evel action ejectors aids card insertion and extraction. Supplied complete with stainless steel spring pin. MTERI: White Nylon 6/6, U Rated 94V-2 CRD MOUNTING DIMENSIONS PC CRD.250 [6.4].375 [9.6] [28.6].450 [11.5].250 [6.4].450 [11.5] [28.6] PC BORD CCESSORIES.250 [6.4].075 [1.90] CT. NO [9.9].375 [9.5].093 [2.36].109 [2.8] MOUNTING OE MTERI: Natural Nylon 6/6, U Rated 94V [28.0].140 [3.6] RDIUS.520 [13.2].250 [6.4].075 [1.90].093 [2.36].140 [3.6] RDIUS.640 [16.3].075 [1.90] CT. NO CT. NO [6.4].134 [3.4].075 [1.90].290 [7.4].093 [2.36] [31.8].260 [6.6].140 [3.6] RDIUS.600 [15.3].250 [6.4].125 [3.2].075 [1.90] ORIZONT TYPE PC BORD GUIDES Guides may be used horizontally or vertically and snap into.125 (3.2) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation. No special tools required to install..245 [6.2].172 [4.4] CT. NO CT. NO Sturdy Nylon construction Mounts into chassis with out tools ssures proper alignment of board Quick and easy installation of board. B B.078 [2.0].120 [3.1] (2) PS.085 [2.2].132 [3.4].218 [5.6] (2) PS.390 [9.9].390 [9.9].093 [2.36].375 [9.5].093 [2.36].140 [3.6] RDIUS.980 [24.9].140 [3.6] RDIUS.640 [16.3].640 [16.3] CT. NO. B (63.5) 2.0 (50.8) (76.2) 2.5 (63.5) (88.9) 3.0 (76.2) (101.6) 3.5 (88.9) (114.3) 4.0 (101.6) (127.0) 4.5 (114.3) (139.7) 5.0 (127.0) (152.4) 5.5 (139.7) (165.1) 6.0 (152.4) (177.8) 6.5 (165.1) (177.8) 6.5 (165.1) 3.25 (82.6) (190.5) 7.0 (177.8) (190.5) 7.0 (177.8) 3.50 (88.9) (203.2) 7.5 (190.5) (203.2) 7.5 (190.5) 3.75 (95.3) (215.9) 8.0 (203.2) (215.9) 8.0 (203.2) 4.00 (101.6) 116 RoS COMPINT ~ ISO 9001 CERTIFIED

123 VERTIC PC BORD GUIDES Vertical board guides provide for a quick and easy assembly of circuit boards. Sturdy design assures boards stay square. These guards can be mounted to chassis or directly to a mother board. Mounting holes have brass threaded inserts to assure secure mounting of guide. fter bracket is installed, boards are quickly locked into place or released for repair or upgrades. ocking pins at the top of the bracket can be set/released using finger pressure, no tools are required..118 [3.00].087 [2.20] Brass threaded inserts assure sturdy connection to chassis or mother board. vailable for circuit boards to tall. ocking pin keeps circuit board locked into place. M3 mounting screws available. ll brackets use same footprint, no redesign of mounting holes required if changing bracket height..072 [1.8].072 [1.8].315 [8.0].473 [12.00].710 [18.0] M3 X 0.5 TRED (2) PS..315 [8.0].473 [12.00].709 [18.0] M3 X 8 TRED (2) PS. PC BORD GUIDES CT. OCK NO. EIGT PIN EIGT (50.0) (42.0) (65.0) (56.5) (90.0) (81.5) (120.0) (112.5) MTERI: Guide: Nylon Threaded Insert: Brass, Nickel plate MTERI: Guide: Polystyrene Threaded Insert: Brass, Nickel plate M3 MOUNTING SCREW CT. OCK NO. EIGT PIN EIGT (160.0) (152.0) Pan head screw vailable in four lengths to accommodate most board thicknesses Flat washer available: P/N 4693 CT. NO M3 TRED MTERI: Steel, Zinc plate RoS COMPINT ~ ISO 9001 CERTIFIED 117

124 These computer brackets have been designed to accommodate a large variety of board sizes and heights. vailable with tabs located properly for ES/EIS or PCI formats. Blanks can be machined or stamped for prototype or low volume production. ll brackets are nickel plated for a clean look and a protective finish. Standard cut-outs can be added to these blanks to suit your specific production needs. See page for standard cut-outs and design worksheet. Premium quality Designed to fit all PC computers height brackets available Blanks available for fillers Fast delivery and cost effective tooling for special designs STNDRD BNK BRCKETS.720 [18.3].401 [10.2] [120.0] [112.8].187 [4.8] [56.5] [107.0] 4-40 TRED (2) PS EIS/IS [31.8].240 [6.1] (2) PS.740 [18.8].110 [2.8].120 [3.1].210 [5.4].350 [8.9].174 [4.4].125 [3.2].317 [8.1].450 [11.5] MTERI:.032 (.81) Steel, Matte Nickel Plate. CT. NO COMPUTER BRCKETS.725 [18.4].401 [10.2] CT. NO [120.0] [112.8].187 [4.8].398 [10.1] [85.4] [107.0] 4-40 TRED (2) PS.750 [19.1].100 [2.6].343 [8.7].310 [7.9] (2) PS.120 [3.1].330 [8.4].467 [11.9].174 [4.4].125 [3.2].450 [11.5] PCI.725 [18.4].401 [10.2] EIS/IS or PCI CT. NO [4.8] [120.0] [112.8].609 [15.5] [107.0] 4-40 TRED.240 [6.1].750 [19.1].100 [2.6].120 [3.1].177 [4.5].295 [7.5] Reinforced with rib for extra strength.330 [8.4].174 [4.4].125 [3.2].450 [11.5].725 [18.4].401 [10.2] [120.0] [112.8].187 [4.8] [107.0].120 [3.1].750 [19.1].100 [2.6].330 [8.4].174 [4.4].125 [3.2].450 [11.5] [16.3] [18.4].401 [10.2] [120.0] [112.8].187 [4.8] [104.9] [107.0] [110.8].750 [19.1].100 [2.6].120 [3.1].330 [8.4].174 [4.4].125 [3.2].450 [11.5] P/N CT. NO CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED

125 STNDRD BNK BRCKETS EIS/IS [120.0] [112.8] [107.0].187 [4.8].120 [3.1].174 [4.4].187 [4.8] [120.0] [112.8].120 [3.1].174 [4.4].725 [18.4].401 [10.2].305 [7.8] (2) PS [87.1].750 [19.1].100 [2.6].327 [8.3].229 [5.8].330 [8.4] 4-40 TRED (2) PS.395 [10.1].315 [8.0] (2) PS.315 [8.0] [88.9].791 [20.1].450 [11.5].725 [18.4].401 [10.2] [61.0].551 [14.0].110 [2.8] 4-40 TRED (2) PS.740 [18.8].110 [2.8].315 [8.0] (2) PS.453 [11.5].547 [13.9].327 [8.3].450 [11.5].740 [18.8] CT. NO CT. NO [18.4].401 [10.2] 4-40 TRED (2) PS.315 [8.0] (2) PS [120.0] [112.8] [107.0].187 [4.8] [89.0].642 [16.3].736 [18.7] [90.8].490 [12.5].740 [18.8].850 [21.6].453 [11.5].547 [13.9].174 [4.4].125 [3.2].450 [11.5].791 [20.1] CT. NO CT. NO [8.3].120 [3.1].725 [18.4].401 [10.2] 4-40 TRED (2) PS.310 [7.9] (2) PS [120.0] [112.8] [107.0].187 [4.8].472 [12.0] OW PROFIE BNK BRCKETS [88.9].075 [1.9].047 [1.2].758 [19.3].092 [2.4] (2) PS.120 [3.1].235 [6.0].273 [7.0].421 [10.7].174 [4.4].850 [21.6].450 [11.5] COMPUTER BRCKETS [79.2] [71.5].120 [3.05] (EMI DIMPE).466 [11.9].341 [8.7] [79.2] [71.5] [53.9].120 [3.05].190 [4.9] (EMI DIMPE).466 [11.9].725 [18.4].732 [18.6].557 [14.2].866 [22.0].725 [18.4].732 [18.6].675 [17.2].401 [10.2].031 [0.79] DIMPE.141 [3.6].216 [5.5].174 [4.4].401 [10.2].141 [3.6] 4-40 TRED (2) PS.340 [8.7] CT. NO CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED 119

126 These computer brackets have been designed with a variety of holes and cutouts to connect most peripherals. The brackets shown reflect the most common configurations for most applications. If our standard brackets do not fit your For Bracket Dimensions Refer to Cat. No EIS/IS CUTOUT TYPE 9 STNDRD COMPUTER BRCKETS [37.4] D-SUB production requirements, we can fabricate a bracket to your exact specifications. Refer to pages for blank dimensions and page 126 for standard cutout dimensions. 9 PIN For Bracket Dimensions Refer to Cat. No Peripherals Video Cards Parallel/Serial Ports External ard Drives External CD Drives PCI CUTOUT TYPE [43.4] [49.9] [55.9] CT. NO CT. NO For Bracket Dimensions Refer to Cat. No EIS/IS CUTOUT TYPE [14.7] For Bracket Dimensions Refer to Cat. No EIS/IS CUTOUT TYPE [14.7] COMPUTER BRCKETS CT. NO For Bracket Dimensions Refer to Cat. No EIS/IS CT. NO CT. NO CT. NO For Bracket Dimensions Refer to Cat. No CUTOUT TYPE 15 CUTOUT TYPE [27.2] EIS/IS 25 PIN [58.3] [75.0] [47.9] [71.3] 15 PIN PIN For Bracket Dimensions Refer to Cat. No For Bracket Dimensions Refer to Cat. No CT. NO CT. NO CUTOUT TYPE 15 EIS/IS EIS/IS 37 PIN CUTOUT TYPE PIN VENT [27.2] [55.7] [72.4] [57.3] [25.5] For Bracket Dimensions Refer to Cat. No CUTOUT TYPE 50 EIS/IS 50 PIN.700 [17.8] EIS/IS OR PCI OE TYP. CT. NO For Bracket Dimensions Refer to Cat. No [48.4] CT. NO OW PROFIE CCESS PORT CT. NO [8.0].270 [6.9] [40.7].462 [11.8] 120 RoS COMPINT ~ ISO 9001 CERTIFIED

127 For Bracket Dimensions Refer to Cat. No CUTOUT TYPE 15 (2) PS EIS/IS [55.7].593 [15.1] MUTIPE D-SUB For Bracket Dimensions Refer to Cat. No CUTOUT TYPE 15 CUTOUT TYPE 25 EIS/IS [47.9].320 [8.2] CT. NO [72.4] [31.8] CT. NO [24.8] [71.3] For Bracket Dimensions Refer to Cat. No CUTOUT TYPE 9 (2) PS EIS/IS [61.2] [25.6] For Bracket Dimensions Refer to Cat. No CUTOUT TYPE 9 CUTOUT TYPE 25 EIS/IS [47.9].578 [14.7] CT. NO [38.1] [73.7] CT. NO [27.2] [71.4] For Bracket Dimensions Refer to Cat. No CT. NO For Bracket Dimensions Refer to Cat. No CT. NO For Bracket Dimensions Refer to Cat. No SCSI 1-50 PIN CUTOUT SCSI [2.24] 50 PIN [20.3].088 [2.24] SCSI 1-68 PIN.280 [7.1] (3) PS CUTOUT TYPE 15 CUTOUT SCSI 1 68 PIN EIS/IS INPUT MIC [43.6].920 [23.4] [52.3] [50.2] [39.4].525 [13.4].335 [8.5] OUTPUT PERIPER SOUND CRDS SCSI For Bracket Dimensions Refer to Cat. No CT. NO For Bracket Dimensions Refer to Cat. No CT. NO For Bracket Dimensions Refer to Cat. No SCSI 2, 3 & 4-50 PIN CUTOUT SCSI 2, 3 OR 4 50 PIN.075 [1.91].080 [2.03].640 [16.3].480 [12.2] SCSI 2, 3 & 4-68 PIN ISDN CUTOUT SCSI 2, 3 OR 4 68 PIN PCI [38.4] [61.6].982 [25.0] [53.9] [58.6] [44.9].500 [12.7] ND SET ISDN/PC FX COMPUTER BRCKETS CT. NO [61.1] [77.7] CT. NO For Bracket Dimensions Refer to Cat. No PCI.270 [6.9] (2) PS.450 [11.5] (2) PS [81.3] [71.4].585 [14.9] [27.2] VIDEO CRDS For Bracket Dimensions Refer to Cat. No [12.2] EIS/IS [26.5] [36.7] FX - MODEM PONE INE S-V IN VIDEO IN UDIO OUT UDIO IN CT. NO CUTOUT TYPE [37.9] [50.4] CT. NO For Bracket Dimensions Refer to Cat. No [13.5] (2) PS EIS/IS OR PCI [29.5] [55.5] [29.5].595 [15.1] USB For Bracket Dimensions Refer to Cat. No [3.8] (3) PS PCI [53.6] [48.5] [43.5].835 [21.2] NETWORK.550 [14.0] CT. NO [6.5] (2) PS.128 [3.3] (4) PS CT. NO [7.7].650 [16.5] RoS COMPINT ~ ISO 9001 CERTIFIED 121

128 EISI/IS or PCI CUSTOM BRCKET WORKSEET PCI with TBS 'Y' DTUM '0-0' 'Y' DTUM '0-0' 'X' DTUM '0-0' 'X' DTUM '0-0' CT. NO CT. NO CT. NO (Ribbed) EIS/IS with TBS CT. NO TRED (2) PS [85.4].398 [10.1] EIS/IS with TBS CUSTOM BRCKET WORKSEET 4-40 TRED (2) PS CT. NO TRED (2) PS [56.5] [31.8] EIS/IS with TBS OW PROFIE with TBS 'Y' DTUM '0-0' 'X' DTUM '0-0' 'Y' DTUM '0-0' 'X' DTUM '0-0' CT. NO CT. NO CT. NO TRED (2) PS [53.9] 'Y' DTUM '0-0' 'X' DTUM '0-0'.190 [4.9] CT. NO CT. NO CT. NO NOTE: Refer to pages 114 and 115 for overall blank dimensions EIS/IS with TBS PCI with TB 'Y' DTUM '0-0' 'X' DTUM '0-0' 4-40 TRED (2) PS [61.0].551 [14.0] 4-40 TRED (2) PS [87.7] [88.9] 4-40 TRED 'Y' DTUM '0-0' 'X' DTUM '0-0' 'Y' DTUM '0-0' 'X' DTUM '0-0' If you do not have your own drawing, please use the worksheet provided. 122 STEP 1: Select a standard blank configuration PCI or EIS/IS, with or without tabs. STEP 2: If you ve selected a standard blank with tabs and the tab locations do not meet your requirements, indicate the dimensions in the boxes. STEP 3: Place your standard panel cutouts (Ex: DB9) on your selected drawing. STEP 4: Use Datum s X and Y on drawing, to indicate the precise location of the center lines of the cutout(s). STEP 5: For stamped identification markings indicate the approximate location(s). STEP 6: Quantities Required: If you have any questions, please contact our application engineers. Name: Company: ddress: Phone: RoS COMPINT ~ ISO 9001 CERTIFIED Fax: Title: For prompt quotations fax, mail or this worksheet.

129 .062 (1.57).067 (1.70) Mounting oles MINITURE TUBUR TERMINS Quick and Easy to Install For Production or Prototype Postive ocking In-ole No Staking Required olds.010 (.25) to.050 (1.27) Diameter Wire These terminals are often used for transistor and Bi-Pin lamp sockets. Terminals snap into place and are firmly held without the need of staking. Wire leads can be inserted from either end. INSERTION TOO For rbor Press: CT. NO. T-11; For and Tool: CT. NO Terminals 1236 and 1237 have tapered socket spring forming that will hold multiple leads in place. Terminals are pre-tinned for easy soldering. MTERI:.006 (.15) Matte Tin, Brass. Pre-Tinned CT. NO CT. NO [1.27] I..065 [1.65] FE CIP For subminiature applications where conventional terminals are too large or too costly. Ideal for quick repairs of printed circuitry. Simply insert wire through hole and it is held firmly by spring action assuring continued postive contact. CMP TERMIN Terminal for production or prototype use. olds as many as 7 leads without soldering, by spring action..812 [20.6].025 SQURE WIRE WRP PINS CONTCT PINS (SEMESS) Completely burr free straight to within.003 (.08) per inch. Conical ends of square-wire with smooth blend-in radius on corners assures ease of insertion with minimum damage to pre-plated PCB holes. CT. NO CT. NO Mtg. ole.062 (1.57).375 Mtg. ole.062 (1.57).187 [9.6] Insertion Tool: CT. NO [4.8] Insertion Tool: CT. NO MTERI:.008 (.20) Matte Tin, Beryllium Copper, Tin Plate.188 [4.8].080 [2.03] FNGE.219 [5.6].469 [11.9].046 [1.17] FRE.053 [1.35].058 [1.48] MTERI:.006 (.15) Matte Tin, Brass. Pre-Tinned.234 [6.0].040 [1.02].053 [1.34].260 [6.6].050 [1.27] I..065 [1.65] CT. NO. 1499FT Mtg. ole.093 (2.36) Insertion Tool: CT. NO [7.9] Insertion Tool: CT. NO MTERI: MTERI:.008 (.20) Matte Tin,.015 (.38) Matte Tin, Spring Steel,.094 [2.39].085 [2.16] Beryllium Copper, Tin Plate.062 [1.57].032 [0.81] Tin Plate.085 [2.16] CT. NO. 1498CP CT. NO [4.8].080 [2.03] FNGE.219 [5.6].469 [11.9] MTERI:.008 (.20) Matte Tin, Beryllium Copper, Tin Plate.065 [1.65] MTERI:.006 (.15) Matte Tin, Brass. Pre-Tinned.047 [1.19] IMP TERMIN Excellent for point to point or feed thru wiring. Slot is serrated to grip component leads. Multiple connections are made quick and easy..130 [3.3].064 [1.7].078 [1.98].030 [.76].045 [1.14] MICRO TERMIN [11.1] [6.0].052 [1.32] Easily press-fit into a.042 (1.07) diameter hole may be flared for permanent installation. Ideally designed for use in circuitry to support components when space is at a premium..100 [2.6].078 [1.98].046 [1.17].050 [1.27] I..063 [1.6].030 [.76].031 [.79].018 [.46] Pins can be staked to.062 (1.57) and.093 (2.36) thick boards..080 [2.03] FNGE.219 [5.6].328 [8.4].359 [9.1].167 [4.3].034 [.86] PUS-IN TERMINS & PINS CT. CT. NO. ength NO. ength (10.2) (16.3) (11.2) (17.1) (13.1) (18.3) (13.6) (21.6) (15.2) (23.3) (15.6) (25.3) (15.9) (28.7) [.25].034 [.86].003 R. [.08 R].025 [.64] MTERI: Phosphor Bronze, Tin Plate CT. NO. B (2.36).293 (7.4) (2.36).357 (9.1) (2.36).437 (11.1) (3.18).379 (9.6) (3.18).566 (14.4) (3.96).379 (9.6) (3.96).566 (14.4) RoS COMPINT ~ ISO 9001 CERTIFIED B MTERI: Brass, Nickel Plate 123

130 MUTI-PURPOSE RDWRE Products such as washers, hole plugs, grommets, bumpers, bushings, clamps, rivets, brackets and ties have can be used in a multitude of environments and applications such as: Chassis mounts and holes ccess panels Wiring Outlets Electrical insulation Mechanical damping Cable/Fiber optic routing & securing PC board and electronic assemblies Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoS and REC directives. We provide 3D modeling, CD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.

131 MUTI-PURPOSE RDWRE CBE MNGEMENT Cable Clamps Cable Ties & Clips CSE RDWRE nti-vibration Grommets Bumpers & Feet Bushings, Nylon Grommets, Rubber & Nylon ole plugs TERMINS Feed Thru Insulated Terminals Turret Terminals (Non-insulated) SECTION CONTENTS TERMIN BORDS Turret Quick Fit Binding Post (Screw) Solder Terminal UNIVERS RDWRE Eyelets & Rivets Nuts Screws Tools Washers Washers, Retaining Washers, Shoulder

132 STEE CBE CMPS Ideal for securing, grounding and routing cable, wiring, piping, tubing, components and fibre optics. STEE F CMPS Ideal for securing, grounding and routing cable, wiring, piping, tubing, components and fibre optics..218 [5.6].500 [12.7] W.203 [5.2] B G D D MTERI:.032 (.81) Steel, Zinc Plate MTERI: Steel, Zinc Plate MET CBE CMPS CT. D NO. FOR CTR TO CTR (4.7).375 (9.5) (6.4).406 (10.3) (7.9).437 (11.1) (9.5).468 (11.9 ) (11.1).500 (12.7) (12.7).531 (13.5) (14.4).562 (14.3) (15.9).594 (15.1) (17.4).625 (15.9) (19.0).656 (16.7) (20.6).687 (11.4) (22.2).718 (18.2) (23.8).750 (19.1) (25.4).781 (19.8) INSUTED STEE CBE CMPS Ideal for securing, insulating and routing cable, wiring, piping, tubing, components and fibre optics..218 [5.6].500 [12.7].203 [5.2] CT. D G W NO. FOR OE CTR TO CTR B TICK WIDT (3.2).218 (5.5).437 (11.1).125 (3.2) (4.7).218 (5.5).437 (11.1).156 (4.0).032 (.81).500 (12.7) (6.4).218 (5.5).437 (11.1).187 (4.7) (7.9).218 (5.5).500 (12.7).250 (6.4).048 (1.22).500 (12.7) (9.5).218 (5.5).531 (13.5).312 (7.9) (11.1).218 (5.5).562 (14.3).375 (9.5).048 (1.22).625 (15.9) (12.7).218 (5.5).625 (15.9).437 (11.1) (14.3).218 (5.5).687 (17.4).500 (12.7).060 (1.52).625 (15.9) (15.9).218 (5.5).750 (19.1).562 (14.3) (17.4).218 (5.5).812 (20.6).625 (15.9) (19.1).218 (5.5).812 (20.6).687 (17.4).060 (1.52).625 (15.9) (20.6).218 (5.5).875 (22.2).750 (19.1) (22.2).281 (7.1).937 (23.8).812 (20.6) (23.8).281 (7.1).968 (24.6).812 (20.6).060 (1.52).750 (19.1) (25.4).281 (7.1) (25.4).937 (23.8) INSUTED STEE F CMPS Ideal for securing, insulating and routing cable, wiring, piping, tubing, components and fibre optics. B W G MTERI:.032 (.81) Steel, Zinc Plate Cushion: Black Vinyl D CT. D NO. FOR CTR TO CTR (4.7).406 (10.3) (6.4).437 (11.1) (7.9).468 (11.9) (9.5).500 (12.7) (11.1).531 (13.5) (12.7).562 (14.3) (14.3).594 (15.1) (15.9).625 (15.9) (17.4).656 (16.7) (19.1).687 (17.4) (20.6).718 (18.2) (22.2).750 (19.1) (23.8).781 (19.8) (25.4).812 (20.6) MTERI: Steel, Zinc Plate Cushion: Black Vinyl CT. D G W NO. FOR OE CTR TO CTR B TICK WIDT (4.7).218 (5.5).437 (11.1).187 (4.7).032 (.81).500 (12.7) (6.4).218 (5.5).500 (12.7).250 (6.4).048 (1.22).500 (12.7) (7.9).218 (5.5).531 (13.5).312 (7.9) (9.5).218 (5.5).562 (14.3).375 (9.5).048 (1.22).625 (15.9) (11.1).218 (5.5).625 (15.9).437 (11.1) (12.7).218 (5.5).687 (17.4).500 (12.7) (14.3).218 (5.5).750 (19.1).562 (14.3).060 (1.52).625 (15.9) (15.9).218 (5.5).812 (20.6).625 (15.9) (17.4).218 (5.5).812 (20.6).687 (17.4) (19.1).218 (5.5).875 (22.2).750 (19.1) (20.6).281 (7.1).937 (23.8).812 (20.6) (22.2).281 (7.1).968 (24.6).812 (20.6).060 (1.52).750 (19.1) (23.8).281 (7.1) (25.4).937 (23.8) (25.4).281 (7.1) (27.0) (25.4) D 126 RoS COMPINT ~ ISO 9001 CERTIFIED

133 CUSIONED CBE CMPS Ideal for securing in rugged applications These cushioned cable clamps secure tightly and protect against shock and vibration NYON CBE CMPS Ideal for securing, insulating and routing cable wiring, piping, tubing, components and fibre optics. MTERI:.050 (1.27) Nylon 6/6, White.218 [5.6] W D MTERI:.032 (0.81) Stainless Steel Cushion: EPDM Rubber CT. D NO. FOR CTR TO CTR (6.4).711 (18.1) (9.5).500 (12.7) (12.7).562 (14.3) (15.9).718 (18.2) (19.1).781 (19.8) (22.2).843 (21.4) (25.4).906 (23.0) D.500 [12.7].203 [5.2] CBE TIE ROUTING CIP These clips snap into PC Boards or Panel chassis and are ideal for securing cable wiring, piping, tubing, components and fibre optics when used with cable ties. CT. D W NO. FOR CTR TO CTR WIDT OE (3.2).325 (8.3).375 (9.5).140 (3.6) (3.2).325 (8.3).375 (9.5).203 (5.2) (4.7).380 (9.7).375 (9.5).140 (3.6) (4.7).380 (9.7).375 (9.5).203 (5.2) (6.4).410 (10.4).375 (9.5).140 (3.6) (6.4).410 (10.4).375 (9.5).203 (5.2) (7.9).445 (11.3).375 (9.5).140 (3.6) (7.9).445 (11.3).375 (9.5).203 (5.2) (9.5).475 (12.1).375 (9.5).140 (3.6) (9.5).475 (12.1).375 (9.5).203 (5.2) (11.1).525 (13.3).375 (9.5).140 (3.6) (11.1).525 (13.3).375 (9.5).203 (5.2) (12.7).550 (14.0).375 (9.5).140 (3.6) (12.7).550 (14.0).375 (9.5).203 (5.2) (14.3).625 (15.9).500 (12.7).203 (5.2) (15.9).660 (16.8).500 (12.7).203 (5.2) (19.1).785 (19.9).500 (12.7).203 (5.2) (22.2).845 (21.5).500 (12.7).203 (5.2) (25.4).910 (23.1).500 (12.7).203 (5.2) (28.6).970 (24.6).500 (12.7).203 (5.2) (31.8) (26.9).500 (12.7).203 (5.2) NYON CBE TIES Popular sizes and strengths to meet common cable tie requirements. Injection molded with one piece construction for strength and reliability. Easily installed by hand. Optional installation tool available, tightens and flush cuts cable tie. CBE CMPS & TIES.220 [5.6].380 [9.7].065 [1.65] FOR.062 [1.57] TICK PNE CT. NO [4.9].320 [8.2] Recommended Mtg. ole.187 (4.8) diameter. MTERI: Nylon 6/6, U Rated 94V [10.2] RoS COMPINT ~ ISO 9001 CERTIFIED MTERI: Natural Nylon 6/6, U Rated 94V-2 CT. TENSIE STRENGT FOR BUNDE ENGT W WIDT T TICKNESS NO. (Min. Bundle) (Max.) (pprox.) (pprox.) (pprox.) lbs (25.4) (108.O).100 (2.54).045 (1.14) lbs (50.8) (203.2).100 (2.54).045 (1.14) lbs (31.8) (152.4).140 (3.56).050 (1.27) lbs (44.5) (190.5).190 (4.83).055 (1.40) lbs (101.6) (368.3).190 (4.83).055 (1.40) 8870 and Operated Cable Tie Installation Tool for 18lb to 50lb Ties T W 127

134 NYON OE PUGS Closes unused chassis holes quickly and economically. Plugs are abrasion and vibration resistant..062 [1.57] B.032 [0.81] STEE OE PUGS Excellent spring retention. Plugs will cover chassis holes, wiring outlets, access holes or unused openings. C B.093 [2.36].062 [1.57] C OE PUGS & BUSINGS MTERI: Nylon 6/6, Matte Finish, Black CT. OE PNE NO. DIMETER TICKNESS B C (6.4).062 (1.57).312 (7.9).312 (7.9) (7.9).062 (1.57).375 (9.5).312 (7.9) (9.5).125 (3.2).468 (11.9).406 (10.3) (12.7).125 (3.2).578 (14.7).406 (10.3) (15.9).125 (3.2).734 (18.6).406 (10.3) (19.1).125 (3.2).921 (23.4).406 (10.3) (22.2).125 (3.2) (25.8).453 (11.5) (25.4).125 (3.2) (30.6).453 (11.5) (28.6).125 (3.2) (30.9).453 (11.5) (31.8).125 (3.2) (34.9).453 (11.5) (34.9).125 (3.2) (38.1).453 (11.5) (38.1).125 (3.2) (42.4).453 (11.5) Used to cover chassis holes while allowing air flow for ventilation. MTERI: Nylon 6/6, Matte Finish, Black Snaps into.032 (.81) to.125 (3.2) thick panels..062 [1.57].032 [0.81].093 [2.36] NYON SPIT BUSINGS Designed to be assembled into holes that already contain wire or cable. Versatile bushing can be used on all chassis from.032 (.81) to.125 (3.2)..062 [1.57].032 [0.81].093 [2.36] MTERI: Nylon 6/6, Black OE B CT. SIZE INSIDE ED NO. REQUIRED DIMETER DIMETER (9.5).265 (6.7).421 (10.7) (12.7).312 (7.9).562 (14.3) (14.3).390 (9.9).640 (16.3) (15.9).453 (11.5).687 (17.4) (19.1).546 (13.9).796 (20.2) (22.2).671 (17.0).921 (23.4) (25.4).796 (20.2) (27.0).062 [1.57] B.062 [1.57] MTERI: Steel, Nickel Plate NYON VENT PUGS.406 [10.3] CT. OE PNE NO. DIMETER TICKNESS B C PRONGS (6.4) ( ).406 (10.3).234 (5.9).062 (1.57) (7.9) ( ).437 (11.1).250 (6.4). 062 (1.57) (9.5) ( ).500 (12.7).234 (5.9).062 (1.57) (12.7) ( ).656 (16.7).281 (7.1).078 (1.98) (15.9) ( ).812 (20.6).296 (7.5).078 (1.98) (19.1) ( ).921 (23.4).296 (7.5).078 (1.98) (22.2) ( ) (27.0).296 (7.5).062 (1.57) (25.4) ( ) (29.0).328 (8.3).093 (2.36) (28.6) ( ) (33.3).343 (8.7).093 (2.36) (31.8) ( ) (36.5).343 (8.7).093 (2.36) (34.9) ( ) (39.7).406 (10.3).078 (1.98) (38.1) ( ) (41.7).406 (10.3).093 (2.36) 12 B C CT. OE NO. DIMETER B C (22.2) (25.8).453 (11.5) (25.4) (30.9).453 (11.5) NYON INSUTING BUSINGS Snaps into panel hole to provide protection for wire, cable and tubing from sharp uneven edges. MTERI: Nylon 6/6, Black.062 [1.57].032 [0.81].093 [2.36].062 [1.57] C OE MXIMUM B C CT. SIZE CSSIS INSIDE ED OVER NO. REQUIRED TICKNESS DIMETER DIMETER EIGT (6.4).062 (1.57).125 (3.2).312 (7.9).312 (7.9) (7.9).062 (1.57).187 (4.7).375 (9.5).312 (7.9) (9.5).125 (3.2).250 (6.4).468 (11.9).406 (10.3) (11.1).125 (3.2).312 (7.9).531 (13.5).406 (10.3) (12.7).125 (3.2).375 (9.5).578 (14.7).406 (10.3) (14.3).125 (3.2).437 (11.1).656 (16.7).406 (10.3) (15.9).125 (3.2).500 (12.7).718 (18.2).406 (10.3) (19.1).125 (3.2).562 (14.3).843 (21.4).406 (10.3) (22.2).125 (3.2).625 (15.9).953 (24.2).453 (11.5) (25.4).125 (3.2).750 (19.1) (28.6).453 (11.5) (30.1).125 (3.2).937 (23.8) (33.3).453 (11.5) (31.8).125 (3.2).937 (23.8) (34.5).453 (11.5) (34.9).125 (3.2) (25.4) (37.3).453 (11.5) (38.1).125 (3.2) (27.0) (40.9).453 (11.5) (44.5).125 (3.2) (34.9) (47.6).453 (11.5) (50.8).125 (3.2) (41.3) (54.0).453 (11.5) (63.5).250 (6.4) (50.0) (67.5).718 (18.2) B 128 RoS COMPINT ~ ISO 9001 CERTIFIED

135 NTI-VIBRTION GROMMETS nti-vibration grommets are designed for noise suppression in office or lab equipment. dditionally, they isolate sensitive instrumentation from unpredictable vibration and shock. The fingers of the grommets provide the flex needed to dampen unwanted noise and vibration. Specially designed shoulder screws are designed to provide the correct spacing. D TRED B ROUND ED EX ED Screw supplied unassembled with isolator RUBBER GROMMETS Ideal for electrical insulation and mechanical damping. MTERI: Rubber, BUN N O.D. I.D. I.D. B O.D. CT. INSIDE MTG. PNE OUTSIDE NO. DIMETER OE TICKNESS DIMETER EIGT (3.2).187 (4.7).062 (1.57).312 (7.9).187 (4.7) (3.2).250 (6.4).062 (1.57).343 (8.7).187 (4.7) (3.2).437 (11.1).062 (1.57).625 (15.9).187 (4.7) (3.2).375 (9.5).093 (2.36).500 (12.7).312 (7.9) (4.7).312 (7.9).062 (1.57).437 (11.1).218 (5.5) (4.7).281 (7.2).093 (2.36).437 (11.1).218 (5.5) (6.4).437 (11.1).062 (1.57).625 (15.9).187 (4.7) (6.4).375 (9.5).062 (1.57).562 (14.3).250 (6.4) (6.4).375 (9.5).093 (2.36).500 (12.7).250 (6.4) (7.9).562 (14.3).062 (1.57).812 (20.6).312 (7.9) (7.9).437 (11.1).062 (1.57).625 (15.9).281 (7.1) (7.9).437 (11.1).093 (2.36).625 (15.9).312 (7.9) (9.5).625 (15.9).062 (1.57).875 (22.2).312 (7.9) (9.5).500 (12.7).062 (1.57).625 (15.9).250 (6.4) (11.1).562 (14.3).062 (1.57).750 (19.1).250 (6.4) (11.1).687 (17.4).062 (1.57).937 (23.8).312 (7.9) (12.7).812 (20.6).062 (1.57) (27.0).312 (7.9) (12.7) (31.8).062 (1.57) (38.1).250 (6.4) (12.7).750 (19.1).093 (2.36).968 (24.6).281 (7.1) (14.3).812 (20.6).062 (1.57) (27.0).312 (7.9) (15.9).875 (22.2).062 (1.57) (28.6).312 (7.9) (15.9) (31.8).062 (1.57) (38.1).250 (6.4) (19.1) (27.0).062 (1.57) (34.9).375 (9.5) (19.1) (36.5).062 (1.57) (46.0).375 (9.5) (22.2) (31.8).062 (1.57) (41.3).437 (11.1) B I.D. O.D. RoS COMPINT ~ ISO 9001 CERTIFIED FEXIBE GROMMETING MTERI: Nylon 6/6, Black UNIVERS RUBBER GROMMET Designed to adjust to different cable diameters from.125 (3.2) to.312 (7.9). Self-adjusting membrane forms a dust resistant seal. I.D. MTERI: Thermoplastic Rubber, Black MTERI: Isolator: EPDM Rubber Shoulder Screw: Steel, Nickel Plate BCK BUE O.D. I.D. B SOUDER SCREW CT. CT. OUTSIDE INSIDE PNE MTG. ENGT NO. NO. DIMETER DIMETER EIGT TICK OE () TRED D ED (9.6).154 (3.9).228 (5.8).063 (1.6).250 (6.4).189 (4.8) (6.4) (9.6).161 (4.1).298 (7.6).125 (3.2).250 (6.4).252 (6.4) (7.6) ex (14.0).191 (4.9).319 (8.1).063 (1.6).375 (9.5).318 (8.0) (10.0) (9.6).154 (3.9).228 (5.8).047 (1.2).250 (6.4).197 (5.0) M3.394 (10.0) (11.2).181 (4.6).209 (5.3).031 (0.8).315 (8.0).197 (5.0) M3.394 (10.0) Round (14.0).191 (4.9).291 (7.4).047 (1.2).375 (9.5).252 (6.4) M3.394 (10.0) Ideal for maintenance, short-run production, R&D or prototyping. Supplied in 25 ft. rolls. Make your own grommets to fit any size or shape required. W CT. MX W NO. PNE WIDT EIGT TICK (1.32).139 (3.5).190 (4.8).028 (0.7) (2.16).182 (4.6).200 (5.1).040 (1.02) (3.18).232 (5.9).220 (5.6).040 (1.02) B O.D..060 [1.52] EXPNDBE MEMBRNE "" DI OE. CT. O.D. I.D. B NO. OUTSIDE INSIDE OE MTG OE EIGT (16.32).380 (9.7).090 (2.3).500 (12.7).250 (6.4) (31.8).810 (20.6).160 (4.0) (25.4).370 (9.4) GROMMETS & BUSINGS 129

136 DESIVE BUMPERS pplies quicky and easily. Prevents nicks, scratches, scuffs, vibration, slippage and noise. Easy peel and stick mounting. Crack resistant. igh coefficient of friction. Sold in sheets. FT DOMED 780 Series 783 SERIES DIMETER DIMETER EIGT EIGT 781 Series SEF-DESIVE SURFCE SEF-DESIVE SURFCE 784 SERIES 782 Series 785 SERIES RUBBER BUMPERS MTERI: Molded Polyurethane BCK CER CT. NO. CT. NO. DIMETER EIGT PRTS/SEET 780-B 780-C.375 (9.5).125 (3.2) B 781-C.500 (12.7).060 (1.5) B 782-C.500 (12.7).140 (3.6) 200 B RECESSED BUMPERS MTERI: Molded Polyurethane Provides excellent traction and shock absorbing qualities. available with or without Mold-in Washers. C D FIG. 1 E FIG. 2 Mold-In Washer E FIG. 3 Mold-In Washer E MTERI: Rubber, BUN S (Figs. 1 & 2), EPDN MTERI: Rubber, BUN S (Figs. 1 & 2), EPDN MTERI: EPDN Rubber CT. SCREW NO. FIG. B C D E SIZE (12.7).250 (6.4).250 (6.4).187 (4.7).125 (3.2) # (15.9).312 (7.9).250 (6.4).187 (4.7).125 (3.2) # (18.2).437 (11.1).250 (6.4).218 (5.5).125 (3.2) # (23.8).375 (9.5).375 (9.5).218 (5.5).187 (4.7) # 8 724* (17.4).250 (6.4).343 (8.7).125 (3.2).155 (3.9) # 6 725* (22.2).312 (7.9).406 (10.3).187 (4.7).187 (4.7) # 8 726* (27.0).437 (11.1).468 (11.9).234 (5.9).200 (5.1) # (14.3).375 (9.5).218 (5.5).187 (4.7).115 (2.9) # (19.1).437 (11.1).265 (6.7).250 (6.4).148 (3.8) # (23.8).625 (15.9).359 (9.1).328 (8.3).174 (4.4) # 8 SEF-OCKING BUMPER FOOT B C BCK CER CT. NO. CT. NO. DIMETER EIGT PRTS/SEET 783-B 783-C.250 (6.4).062 (1.6) B 784-C.335 (8.5).085 (2.2) B 785-C.440 (11.2).200 (5.1) 242 D B C D unique easy-to-install self-locking bumper foot Two piece assembly, furnished pre-assembled Vibration absorbing and skid resistant Mounts without screws or tools Recommended Mounting ole:.305 (7.8) diameter.980 [24.9].312 [7.9] MTERI: Foot: Santoprene, Black Pin: Polypropylene, Black.425 [10.8].910 [23.1] OCKING PIN (SOWN PRTIY INSERTED) CT. NO RoS COMPINT ~ ISO 9001 CERTIFIED

137 FT WSERS NYON & FIBRE MTERI: Fibre: Commercial Grade per STM D710 Nylon: Grade 6/6 per STM D4066 W TICKNESS.032 (.81).047 (1.19).062 (1.57) MTERI I.D. O.D. CT. NO. CT. NO. CT. NO. FIBRE.187 (4.8) (2.49).250 (6.4) #2.312 (7.9) NYON.187 (4.8) (2.49).250 (6.4) 3347* * #2.312 (7.9) FIBRE.250 (6.4) (3.05).312 (7.9) #4.375 (9.5) NYON.250 (6.4) (3.05).312 (7.9) #4.375 (9.5) FIBRE.250 (6.4) (3.56).312 (7.9) #6.375 (9.5) NYON.250 (6.4) (3.56).312 (7.9) #6.375 (9.5) FIBRE.312 (7.9) (4.34).375 (9.5) #8.437 (11.1) NYON.312 (7.9) (4.34).375 (9.5) #8.437 (11.1) (7.9) FIBRE.196 (4.98).375 (9.5) # (11.1) (12.7) (7.9) NYON.196 (4.98).375 (9.5) # (11.1) (12.7) (11.1) FIBRE.260 (6.60).500 (12.7) /4.625 (15.9) (19.1) (11.1) NYON.260 (6.60).500 (12.7) /4.625 (15.9) (19.1) (12.7) FIBRE.385 (9.65).625 (15.9) /8.750 (19.1) (25.4) (12.7) NYON.385 (9.65).625 (15.9) /8.750 (19.1) (25.4) *.090 (2.3) I.D. W O.D. I.D. INTERN TOOT WSERS NYON RETINING WSERS Retaining Washers are similar to our standard washers, but with a specially configured ID designed to grip the screw shank. The washer remains attached to the screw, for quick, easy assembly. MTERI: Nylon, 6/6 U Rated 94V-0 I.D. W O.D. EIGT ().032 (0.81).062 (1.57) SCREW CT. NO. CT. NO. SIZE I.D. O.D #2 (M2).115 (2.9).078 (1.9).203 (5.2) #4.156 (3.9).102 (2.6).256 (6.7) #6 (M3.5).198 (5.0).128 (3.3).328 (8.3) #8 (M4).235 (5.9).152 (3.8).390 (9.9) (3.4).390 (9.9) (11.5) 2290 # (7.0).177 (4.5).500 (12.7) (16.0) #1/4 (M6).375 (9.5).234 (5.9).593 (15.1) #3/8.564 (14.3).350 (8.9).890 (22.6) STEE FT WSERS W MTERI: Steel, Zinc Plate O.D. I.D. CT. NO. I.D. O.D. W SCREW SIZE (3.3).281 (7.1).025 (.63) (3.1).220 (5.6).032 (.81) #4 (M3) (3.7).373 (9.5).031 (.80) #6 (M3.5) (5.1).436 (11.1).033 (.84) #10 (M4) (9.9) (38.1).094 (2.4) 3/8 STEE OCK WSERS WSERS O.D. O.D. W I.D. MTERI: Phoshor Bronze - Nickel Plate CT. NO. I.D. O.D. W SCREW SIZE (5.7).402 (10.2).020 (.51) #12 (M5) (6.6).469 (11.9).025 (.63) 1/4 (M6) W MTERI: Steel, Zinc Plate RoS COMPINT ~ ISO 9001 CERTIFIED I.D. CT. NO. I.D. O.D. W SCREW SIZE (3.0).205 (5.2).031 (.78) (3.0).197 (5.0).025 (.63) #4 (M3) (3.7).250 (6.4).033 (.84) #6 (M3.5) (5.0).320 (8.1).047 (1.2) #10 (M4) (6.5).479 (12.2).074 (1.9) 1/4 (M6) (8.2).586 (14.8).078 (2.0) 5/16 (M8) 131

138 FIBRE SOUDER WSERS EX MCINE NUTS WSERS & NUTS MTERI: Fibre, Commercial Grade per STM D710 CT. NO. O.D. B I.D. S.D. SCREW SIZE (.64).250 (6.4).047 (1.2).093 (2.4).123 (3.1) (.64).250 (6.4).047 (1.2).093 (2.4).156 (4.0) # (.38).312 (7.9).062 (1.57).125 (3.2).203 (5.2) (.64).312 (7.9).062 (1.57).125 (3.2).203 (5.2) (.79).250 (6.4).031 (.79).115 (2.9).187 (4.7) (.79).281 (7.1).062 (1.57).115 (2.9).175 (4.4) # (.79).312 (7.9).062 (1.57).120 (3.1).180 (4.6) (.79).250 (6.4).062 (1.57).140 (3.6).187 (4.7) (.79).312 (7.9).062 (1.57).140 (3.6).187 (4.7) (.79).375 (9.5).062 (1.57).140 (3.6).210 (5.3) (.79).375 (9.5).062 (1.57).140 (3.6).240 (6.1) # (.79).500 (12.7).062 (1.57).140 (3.6).240 (6.1) (.79).375 (9.5).062 (1.57).170 (4.3).246 (6.2) (.79).417 (10.6).062 (1.57).170 (4.3).210 (5.3) (.79).312 (7.9).062 (1.57).170 (4.3).218 (5.5) (.79).375 (9.5).062 (1.57).170 (4.3).215 (5.5) # (.79).500 (12.7).062 (1.57).170 (4.3).240 (6.1) (.79).375 (9.5).062 (1.57).194 (4.9).308 (7.8) (.79).375 (9.5).062 (1.57).194 (4.9).240 (6.1) # (.79).500 (12.7).062 (1.57).196 (5.0).240 (6.1) (.79).500 (12.7).062 (1.57).253 (6.4).308 (7.8) (.79).625 (15.9).062 (1.57).265 (6.7).359 (9.1) (.79).625 (15.9).062 (1.57).385 (9.8).498 (12.6) (.79).750 (19.1).062 (1.57).385 (9.8).498 (12.6) NYON SOUDER WSER/BUSINGS MTERI: Nylon 6/6 per STM D4066 CT. SCREW NO. O.D. B I.D. S.D. SIZE (.64).260 (6.6).030 (.76).095 (2.4).154 (3.9) (3.2).181 (4.6).047 (1.2).090 (2.3).120 (3.1) (4.8).181 (4.6).047 (1.2).090 (2.3).120 (3.1) # (6.4).181 (4.6).047 (1.2).090 (2.3).120 (3.1) 3049*.031 (.79).218 (5.5).040 (1.0).115 (2.9).135 (3.4) (1.2).250 (6.4).032 (.81).115 (2.9).185 (4.7) (2.4).235 (6.0).047 (1.2).115 (2.9).145 (3.7) (3.2).235 (6.0).047 (1.2).115 (2.9).145 (3.7) # (4.7).235 (6.0).047 (1.2).115 (2.9).145 (3.7) (6.4).235 (6.0).047 (1.2).115 (2.9).145 (3.7) (.81).385 (9.8).062 (1.57).145 (3.7).240 (6.1) (.81).250 (6.4).062 (1.57).140 (3.6).187 (4.7) (.81).312 (7.9).062 (1.57).140 (3.6).187 (4.7) (3.2).290 (7.4).047 (1.19).140 (3.6).170 (4.3) # (4.7).290 (7.4).047 (1.19).140 (3.6).170 (4.3) (6.4).290 (7.4).047 (1.19).140 (3.6).170 (4.3) (12.7).290 (7.4).047 (1.19).140 (3.6).170 (4.3) (.81).375 (9.5).032 (.81).171 (4.3).250 (6.4) (3.6).344 (8.7).062 (1.57).171 (4.3).205 (5.2) (6.4).344 (8.7).062 (1.57).171 (4.3).205 (5.2) # (9.5).344 (8.7).062 (1.57).171 (4.3).205 (5.2) (12.7).344 (8.7).062 (1.57).171 (4.3).205 (5.2) (.81).375 (9.5).062 (1.57).196 (5.0).308 (7.8) (2.36).438 (11.1).062 (1.57).200 (5.1).260 (6.6) (6.4).399 (10.1).062 (1.57).200 (5.1).260 (6.6) # (12.7).399 (10.1).062 (1.57).200 (5.1).260 (6.6) (19.1).399 (10.1).062 (1.57).200 (5.1).260 (6.6) (.81).437 (11.1).032 (.81).253 (6.4).310 (7.9) (1.98).492 (12.7).032 (.81).260 (6.7).312 (7.9) (4.7).513 (13.0).062 (1.57).260 (6.7).312 (7.9) (6.4).513 (13.0).062 (1.57).260 (6.7).312 (7.9) (9.5).513 (13.0).062 (1.57).260 (6.7).312 (7.9) (12.7).513 (13.0).062 (1.57).260 (6.7).312 (7.9) * Black B B C C EX EX TRED METRIC MCINE NUTS TRED BIND CPTIVE NUTS - PRESS FIT MOUNT CSSIS, PNES, ET SINKS, SOCKETS Easy ssembly Dampens Vibration Eliminates Insulating Washer i-dielectric Strength unique reusable fastener made of NYON which contains a threaded brass nut. Finger pressure or light tap seals it in a pre-drilled hole. The nut is drawn up causing a Nylon bulge behind the workpiece. Screw may be removed or replaced. MTERI: Molded Nylon with Brass threaded insert MTERI: Nylon 6/6 (RoS Compliant) Steel, Zinc Plate (Non-RoS Compliant) Note: RoS Compliant finishes available on special order STEE NYON CT. NO. CT. NO. EX TRED (4.7) (6.4) (6.4) (7.9) (6.4) (7.9) (9.5) (10.9) (12.7) MTERI: Nylon 6/6 U Rated 94V-2 Steel, Nickel Plate STEE NYON CT. NO. CT. NO. EX TRED mm M mm M mm M4 T Shown Installed (Screw not supplied) IDE OE SEET CT. NO. TRED SIZE REQ D. TICKNESS T (6.4).047 (1.2).312 (7.9).030 (.76) (7.9).078 (1.9).375 (9.5).030 (.76) (10.3).093 (2.4).500 (12.7).030 (.76) 132 RoS COMPINT ~ ISO 9001 CERTIFIED

139 Suited for a variety of fastening applications to assure firm, electrical and mechanical connections. Flat ead styles for use where fasteners cannot protrude above mating surfaces. Pan ead style to replace round head type for cosmetic enhancement and smooth surface area uses. For Metric ardware Refer to page 55. MTERI: Steel, Zinc Plate (Non-RoS Compliant) Note: RoS Compliant finishes available on special order Nylon 6/6 (RoS Compliant) TRED TRED Binding ead Flat ead Pan ead SEF TPPING SCREWS Slotted drive, hex head MCINE SCREWS TRED ighly versatile screw, used in wood, fiberglass and metal where machine thread inserts are not furnished. TRED MTERI: Steel, Zinc Plate (Non-RoS Compliant) Note: RoS Compliant finishes available on special order TRED ENGT CT. NO. No (9.5) 9575 No (9.5) (12.7) 9577 No (9.5) (12.7) 9579 No (9.5) (12.7) 9581 BINDING ED SCREWS COORED ED BINDING ED FT ED PN ED STEE NYON STEE NYON STEE NYON TRED ENGT CT. NO. CT. NO. CT. NO. CT. NO. CT. NO. CT. NO..250 (6.4) (12.7) (19.1) (6.4) (9.5) (12.7) (15.9) (19.1) (25.4) (4.7) (6.4) (9.5) (12.7) (15.9) (19.1) (25.4) (31.8) (50.8) (6.4) (9.5) (12.7) (15.9) (19.1) (25.4) (31.8) (12.7) (19.1) (25.4) (38.1) METRIC SCREWS Choice of: Steel, Zinc Plate Nylon: 6/6, U Rated 94V-2 TRED STEE NYON 6/6 CT. NO. CT. NO. M2.5 TRED M3 TRED M4 TRED STINESS STEE PN ED SCREWS Phillips drive pan head machine screws MCINE SCREWS Ideal for quick identification of screw terminal. Reduces errors in wirng of cables. See pages for screw terminals with colored screws installed. Only head is painted, provides reliable electrical contact to terminal. TRED MTERI: Brass, Nickel Plate with Painted Color ead CT. NO. CT. NO. M3 6mm ED COOR (6.3) NICKE RED BCK WITE BUE GREEN YEOW MTERI: Stainless Steel RoS COMPINT ~ ISO 9001 CERTIFIED TRED CT. NO. ENGT TRED (6.4) (9.5) (12.7) (6.4) (9.5) (12.7) (9.5) (12.7) (19.1) (9.5) (12.7) (19.1) 133

140 EYEETS & RIVETS MTERI: Brass, Bright Electro Tin, MI-T Other platings can be furnished. choice of the most popular sizes in use for PC board and electronic assembly applications. C MTERI: Brass, Nickel Plate B These standardized brass rivets typify the scope and variety of popular rivets that will provide faster and stronger assemblies at lower cost. We suggest you rivet and test a sample before purchasing large quantities for your application. WIDE RO EYEETS B STKING OUTSIDE ENGT C MTG. TOO CT. DIMETER UNDER FNGE OE CT. NO. BRRE FNGE DIMETER SIZE NO (1.57) (2.36) (1.49) O.D..125 (3.18).062 (1.57).105 (2.7) USE DRI (1.14) I.D..156 (3.96) # (4.75) (5.56) (2.36) (2.26) O.D..125 (3.18).093 (2.36) (1.78) I.D..156 (3.96).150 (3.8) USE DRI (4.75) # (5.56) (2.36) (3.18) (3.07) O.D..156 (3.96).125 (3.18) (2.59) I.D..187 (4.75).200 (5.1) USE DRI # (5.56) (6.35) (3.18).156 (3.96) (3.86) O.D..156 (3.96).245 (6.2) USE DRI (3.35) I.D..187 (4.75) 5/ (5.56) 3079 SEMI-TUBUR RIVETS B SNP RIVETS T DWG. 1 DWG. 2 B.312 [7.9] O.D..312 [7.9] O.D. STKING TOOS Set consisting of top and bottom tool. Made from Tool Steel and highly polished. TOP TOO BOTTOM TOO B MTG. CT. NO. ENGT UNDER ED SNK DIMETER ED DIMETER OE SIZE (3.2).067(1.70) Dia (3.9).060 (1.55).109 (2.8) USE DRI # (4.8) (3.9) (4.8).087 (2.21).093 (2.36) Dia (5.5).147 (3.7) USE DRI # (6.4) (3.9) (4.8).128 (3.25) Dia..120 (3.06).218 (5.5) (5.5) USE DRI # (6.4) B s Installed D D ttach panels and mounting hardware without any tooling. eaves a clean cosmetic look once installed. Can be installed without access to underside. Removable so assembly can be easily repaired or upgraded. MTERI: Nylon 6/6, U Rated 94V-2, Black CT. T D B MTG. NO. DWG. PNE TICKNESS RIVET ENGT RIVET DIMETER ED DIMETER ED EIGT OE SIZE /.079 (1.3/2.0).130 (3.3) /.110 (2.1/2.8).160 (4.0).076 (1.9).165 (4.2).047 (1.2).083/.087 (2.1/2.2) /.142 (2.9/3.6).190 (4.8) /.157 (3.0/4.0).220 (5.6) /.181 (3.7/4.6).240 (6.1) /.217 (4.5/5.5).280 (7.1).138 (3.5).252 (6.4).063 (1.6).142/.146 (3.6/3.7) /.256 (5.5/6.5).310 (7.9) /.217 (4.5/5.5).280 (7.1) /.256 (5.5/6.5).310 (7.9) /.295 (6.5/7.5).350 (9.0).158 (4.0).315 (8.0).071 (1.8).161/.165 (4.1/4.2) /.335 (7.5/8.5).390 (10.0) 134 RoS COMPINT ~ ISO 9001 CERTIFIED

141 BSIC STKING KIT This kit provides the basic components needed to stake a majority of our most popular sizes of eyelets, rivets and terminals. The unskilled operator can produce profesional looking assemblies quickly and with minimal training. CT. NO COMPETE KIT MSTER STKING KIT This kit provides all of the components needed to stake most terminals, standoffs, eyelets or rivets. This kit also includes sprung receding pins so that eyelets can be prealigned for easy assembly of componets. Kit supplied in convenient plastic case for ease of use. CT. NO COMPETE KIT SNK CT. NO. CONSISTS OF ONE EC: Top Setting Tool 1719 nvil older Bottom nvil RIVET SNK RIVET EYEET EYEET CT. NO. CONSISTS OF ONE EC: Top Swaging Tool nvil older 1325 nvil for 6-32 Standoffs nvil for Turret Terminals nvil for Fork Turret Terminals 1315 Receding Pin (1.15) Dia Receding Pin (1.75) Dia Return Spring for Receding Pins ll that is required to stake almost all swage components. Just press down and it stakes. Tools provided allow bench top staking with out setting up arbor or drill press. Staking tool can be adjusted 1/4 Diameter Tools IMPCT STKING KIT INDIVIDU TOOS TOP SETTING TOOS (Swager) For Single End Terminals, Eyelets or Rivets CT. NO. FOR SNK (1.57) to.098 (2.49) (2.8) to.125 (3.2) (3.3) to.140 (3.6) (4.5) to.190 (4.8) For Doube End (Feed-Thru) ole in tool fits over Pin head and securely stakes the rivet part of terminal. BOTTOM NVIS For Single End Terminals or Double End Terminals nvils have different size holes in each end therefore will accept 2 sizes of Pins of either Single or Double end Turret type Terminals. CT. NO CT. NO CT. NO. FOR PIN ON RIVET END (1.30) ole Dia (1.60) ole Dia (1.85) ole Dia (1.49) ole Dia (2.49) ole Dia. B CT. NO (1.35).065 (1.65) (1.78).100 (2.54) (3.25).152 (3.86) NVIS FOR FORK TERMINS ccepts Diameter of 3/32 to 5/32 at one end and diamter of 3/16 other end.040 (1.0) slot one end and.060 (1.52) slot at other end. NVIS FOR SWGE SPCERS CT. NO. BUSING SIZE 1326 olds Bushing with 5/32 O.D For Bushing with 6-32 Thread 1309 For Bushing with 4-40 Thread TOO ODERS B.065 [1.7] SOT.042 [1.1] SOT Tool holders will hold all.250 (6.4) diameter anvils. May be used with receding pin and return spring to hold eyelets in place during the staking process. RIVET EYEET SNK.750 [19.0].750 [19.0] to provide heavy to light blows. Receding sprung pins can be assembled into anvil to locate eyelets for easy assembly of components. Kit supplied in convenient plastic case for ease of use. STKING TOO KITS CT. NO COMPETE KIT RoS COMPINT ~ ISO 9001 CERTIFIED CT. NO. CONSISTS OF ONE EC: TOOS 1302 Impact andle 1300 nvil Tool older Base SWGING TOOS (1.02) to.072 (1.83) (1.98) to.093 (2.36) SWGING TOOS FOR DOUBE ENDED TURRET (1.35) Diameter ole (1.57) Diameter ole NVI COMPENTS nvil for Turret Terminals nvil for Fork Turret Terminals 1315 Receding Pin (1.15) Dia Receding Pin (1.75) Dia Return Spring for Receding Pins 135

142 PTFE INSUTED TERMINS & PINS Space saving design for high density packaging Outstanding Electrical, Mechanical, Thermal and Chemical properties Provides greater pull-out strength and high torque resistance Ideal for high quality terminal and connector applications Custom PTFE jacks manufactured to your specifications Other platings and bushing colors available upon request SPECIFICTIONS Terminal: Brass, Tin Plate Bushing: White PTFE.062 [1.57] [.30] Mtg. ole Dia. PINS SODER TERMINS PTFE INSUTED TERMINS & PINS Top Mount Bottom Mount.040 [1.0] CT. NO. B C E Mtg. ole Dia (3.2).104 (2.6).089 (2.3).161 (4.1).091 (2.3) (3.2).093 (2.4).100 (2.5).925 (23.5).086 (2.2) (4.4).148 (3.8).100 (2.5).150 (3.8) (4.4).148 (3.8).075 (1.9).185 (4.7) (4.4).148 (3.8).050 (1.3).260 (6.6) (4.4).148 (3.8).075 (1.9).260 (6.6) (4.4).148 (3.8).100 (2.5).250 (6.4).136 (3.5) (4.4).148 (3.8).160 (4.1).250 (6.4) (4.4).148 (3.8).100 (2.5).490 (12.4) (4.4).148 (3.8).100 (2.5).585 (14.9) PIN.040 [1.0].148 [3.8].040 [1.0].172 [4.4] Mtg. ole CT. NO (3.5) Dia. CT. NO Feed-Thru 136 E E C.190 [4.8].120 [3.0] PIN B PIN-TO-PIN R B C OOW PIN.032 [8.1] DI OE TRU..045 [1.1].025 [.64] F.150 [3.8].075 [1.9] Mtg. ole.113 (2.9) Dia. CT. NO. B C E F R Mtg. ole Dia. E (2.4).075 (1.9).100 (2.5).315 (8.0).550 (13.9).030 (7.6).069 (1.8) C (3.2).093 (2.4).100 (2.5).196 (5.0).453 (11.5).040 (1.0) (3.2).093 (2.4).100 (2.5).250 (6.4).515 (13.1).040 (1.0).086 (2.2) Feed-Thru.148 [3.8] Feed-Thru (3.2).093 (2.4).100 (2.5).250 (6.4).443 (11.3).040 (1.0).040 [1.0] (3.8).125 (3.2).100 (2.5).250 (6.4).443 (11.3).040 (1.0).113 (2.9) (4.4).148 (3.8).100 (2.5).250 (6.4).515 (13.1).040 (1.0) Mtg (4.4).148 (3.8).110 (2.8).260 (6.6).535 (13.6).040 (1.0) CT. ole NO. C E R Dia (4.4).148 (3.8).250 (6.4).250 (6.4).710 (18.0).040 (1.0).136 (3.5) (4.4).148 (3.8).250 (6.4).303 (7.7).719 (18.3).040 (1.0) (2.5) (6.4) (2.0) (4.4).148 (3.8).160 (4.1).250 (6.4).725 (18.4).040 (1.0) (3.5) (4.4).148 (3.8).170 (4.3).250 (6.4).630 (16.0).040 (1.0) (5.8) (9.5) (2.4) CT. NO Top Mount.171 [4.3].171 [4.3] RoS COMPINT ~ ISO 9001 CERTIFIED R E C.093 [2.4].312 [7.9].196 [5.0].173 [4.4] R E C B B Bottom Mount FIG. 1 FIG. 2 FIG. 3 CT. NO. FIG. B C E R Mtg. ole Dia (3.2).093 (2.4).100 (2.5).210 (5.3).060 (1.5).086(2.2) (3.2).093 (2.4).080 (2.0).250 (6.4).080 (2.0).086(2.2) (3.2).093 (2.4).100 (2.5).250 (6.4).080 (2.0).086(2.2) (4.4).148 (3.8).140 (3.6).194 (4.9).093 (2.4).136 (3.5) (4.4).148 (3.8).110 (2.8).250 (6.4).080 (2.0).136 (3.5) (4.4).148 (3.8).125 (3.2).303 (7.7).080 (2.0).136 (3.5) (4.4).148 (3.8).165 (4.2).290 (7.4).093 (2.4).136 (3.5) (4.4).148 (3.8).250 (6.4).290 (7.4).093 (2.4).136 (3.5) (4.4).148 (3.8).165 (4.2).437 (11.1).093 (2.4).136 (3.5) (4.4).148 (3.8).100 (2.5).150 (3.8).080 (2.0).136 (3.5) (4.8).164 (4.2).150 (3.8).370 (9.4).090 (2.3).152 (3.9) 11322* (3.8).125 (3.2).110 (2.8).180 (4.6).090 (2.3).113 (2.9) (3.2).093 (2.4).100 (2.5).170 (4.3).060 (1.5).086(2.2) (4.4).148 (3.8).100 (2.5).210 (5.3).080 (2.0).136 (3.5) (4.8).171 (4.3).155 (3.9).210 (5.3).080 (2.0).158 (4.0) *ollow Turret Feed-Thru.090 [2.3].172 [4.4] Mtg. ole CT. NO (4.0) Dia. CT. NO R.172 [4.4] TURRET TURRET-TO-TURRET TURRET-TO-PIN.093 [2.4].100 [2.5].075 [1.9].030 [.81] E C R B.195 [5.0].180 [4.6].060 [1.5].140 [3.6].270 [6.9].040 [1.00] Mtg. ole.158 (4.0) Dia. Mtg. ole.066 (1.7)Dia.

143 SPIT-TYPE FORK TURRETS FORK R SPECIFICTIONS Terminal: Brass, Tin Plate Bushing: White PTFE E FORK-TO-TURRET E R TREDED FEED - TRU TERMINS SPECIFICTIONS Terminal: Brass, Tin Plate Bushing: White PTFE Body: Brass, Nickel Plate.032 [0.8] (2) PS..156 [4.0] EX 4-40 TRED.235 [6.0] E C B FIG. 1 TREDED TURRET TERMINS SPECIFICTIONS Terminal: Brass, Tin Plate Bushing: White PTFE EX R C E TRED CT. NO. Thread ex C E R (3.9).206 (5.2).360 (9.1).125 (3.2).062 (1.6) (6.4).270 (6.9).510 (12.9).250 (6.4).094 (2.4) (6.4).270 (6.9).510 (12.9).375 (9.5).094 (2.4) B FIG [20.9] CT. FIG. Mtg. ole NO. NO. B C E R Dia (4.4).148 (3.8).125 (3.2).250 (6.4).125 (3.2).136 (3.5) (4.8).171 (4.3).150 (3.8).390 (9.9) (4.8).171 (4.3).150 (3.8).453 (11.5) (4.8).171 (4.3).150 (3.8).328 (8.3) (4.8).171 (4.3).150 (3.8).390 (9.9).148 (3.8).158 (4.0) (4.8).171 (4.3).150 (3.8).453 (11.5) (4.8).171 (4.3).212 (5.4).390 (9.9) CT. NO. E (8.3).200 (5.1) (9.6).250 (6.4) CT. NO OCKWSER NUT EX TRED.095 [2.4] MODED DIY PTTE INSUTED TREDED TERMINS SINGE TURRET TO ME TRED MTERI: Terminal: Brass, Tin Plate Insulator: Blue Molded Diallyl Phthalate, SDGF Base: Brass, Tin Plate C SPECIFICTIONS Terminal: Brass, Tin Plate Bushing: White PTFE Body: Brass, Nickel Plate SPECIFICTIONS Terminal: Brass, Tin Plate Bushing: White PTFE Body: Brass, Nickel Plate.082 [2.1].062 [1.6] OCKWSER NUT EX TRED R NUT.287 [7.3].225 [5.7].403 [10.2] E OCKWSER CT. NO. Thread ex E R (7.9).425 (10.8).565 (14.3).062 (1.6) (4.8).368 (9.3).510 (12.9).040 (1.0) Properties: igh Dielectric Breakdown Continuous Use Temperature up to 350 F (176 C) U 94 V-O Rated Other platings and insulator colors available upon request SINGE TURRET TO FEME TRED Nut and washer supplied unassembled Nut and washer supplied unassembled Nut and washer supplied unassembled DOUBE TURRET TO FEME TRED INSUTED TERMINS R.072 [1.8] R.146 [3.7].047 [1.2] E B.146 [3.7].047 [1.2].156 [4.0] B.232 [5.9].062 [1.6] E B 2-56 TRED.156 [4.0] EX 2-56 TRED.156 [4.0] EX 4-40 TRED EX. CT. NO. B E R (6.0).156 (4.0).125 (3.2).072 (1.8) (6.0).218 (5.5).125 (3.2).072 (1.8) (6.0).218 (5.5).187 (4.8).072 (1.8) CT. NO. B (2.0).235 (5.9) (3.0).391 (9.9) CT. NO. B E R (9.5).219 (5.6).156 (4.0).093 (2.4) (15.1).344 (8.7).219 (5.6).140 (3.6) RoS COMPINT ~ ISO 9001 CERTIFIED 137

144 STYES Single, double and triple turrets Double-ended (feed-thru) Split-type (fork) Tubular (hollow) Swage and thread mounting types available Bright Tin plated for extended shelf life and excellent solderability Wide variety of sizes to suit space and wire size requirements TURRET TERMINS ORDERING INFORMTION Keystone standardized terminals are available for various board thicknesses. To specify a terminal, select the CT. NO. and DSED NUMBER that corresponds with the board thickness to be used. DS NUMBERS (Board Thicknesses) -1 for.032 (.81) thick Board -2 for.062 (1.57) thick Board -3 for.093 (2.36) thick Board -4 for.125 (3.2) thick Board Example: for.032 (.81) thick Board for.062 (1.57) thick Board TURRET TERMINS SPECIFICTIONS MTERI: Brass - Per STM-B16, Bright Electro-Tin per MI-T Type 1. Other platings available upon request. SPECI TERMINS Custom terminals can be manufactured to your specifications. Complete facilities available to meet your production requirements. Quotations on special terminals furnished promptly upon receipt of sample, sketch or print. CUSTOM BUIT TERMIN BORDS We are specialists in the assembly of terminals, eyelets, clips and special hardware. Quotations on special terminal boards furnished promptly upon receipt of sample, sketch or print. ssembly service using customer supplied materials also available. (Refer to pages for standard terminal boards.).062 [1.57].047 [1.19].094 [2.39].062 [1.57] STKING TOOS For easy mounting of terminals to insulators and PC boards. Standard and special order staking tools are available. Cat. No. T designates a tool consisting of a TOP STKING PUNC and a BOTTOM NVI. Manufactured from steel with zinc plate. Punch and anvil are precision machined and hardened to insure long life. Refer to page 135. CUSTOM BUIT STKING TOOS Custom prototype and production staking tools can be furnished for Single-End, Double-End, Fork Terminals, Extruded ugs, Eyelets, Rivets, etc. Contact our Engineering Department for details. SINGE, DOUBE & TRIPE TURRET [1.02].093 [2.36].062 [1.57].156 [4.0].094 [2.39].062 [1.57].093 [2.36].072 [1.83].063 [1.60].093 [ [2.36].072 [1.83].050 [1.27] [2.36].186 [4.7].090 [2.29].104 [2.7].219 [5.6].075 [1.90] [4.8] [4.8].078 [1.98] Staking Tool 1528-T Staking Tool No. T-1 Staking Tool No.T-1 Staking Tool No. T-2 Staking Tool No. T-8 CT. NO (1.30) (2.08) (2.8) (3.6) CT. NO (1.35) (2.13) (2.9) (3.7) CT. NO (1.30) (2.08) (2.8) (3.6) CT. NO (1.98) (2.8) (3.5) (4.4).109 [2.8].156 [4.0].090 [2.29].281 [7.2].145 [3.7].112 [2.9].145 [3.7].187 [4.8].112 [2.9] [6.0] CT. NO (1.98) (2.8) (3.5) (4.4).360 [9.2] Staking Tool No. T-1 CT. NO (1.37) (2.13) (2.9) (3.7).093 [2.36].090 [2.29] Staking Tool No. T-1 CT. NO (1.30) (2.08) (2.8) (3.6) [7.7] Staking Tool No. T-2 CT. NO (1.57) (2.39) (3.2) (3.9).145 [3.7].187 [4.8].484 [12.3] Staking Tool No. T-8 CT. NO (1.98) (2.8) (3.5) (4.4) Staking Tool No. T-2 CT. NO (1.98) (2.8) (3.5) (4.4).093 [2.4] [2.9].156 [4.0] EX TRED CT. NO Staking Tool No. T-5 CT. NO (1.98) (2.8) (3.5) (4.4) TREDED TURRETS.043 [1.09] TRU.075 [1.9] 2-56 TRED [4.8] CT. NO (2.36) (3.2) (4.8) Staking Tool No. T-8 CT. NO (1.98) (2.8) (3.5) (4.4).145 [3.7].187 [4.8] EX TRED [9.2] CT. NO (3.2) (4.8) 138 RoS COMPINT ~ ISO 9001 CERTIFIED

145 .062 [1.57].025 [.64] SOT.046 [1.17] SPIT-TYPE (FORK) TURRETS [.63] TRU.156 [4.0] Staking Tool 1515-T CT. NO (1.47) (2.26) (3.1) (3.8).093 [2.36].040 [1.02] SOT.060 [1.52].043 [1.09] TRU.156 [4.0] Staking Tool Special Order CT. NO (2.13) (2.9) (3.7).094 [2.39].043 [1.09] TRU.062 [1.57].024 [.61].156 [4.0] Staking Tool No. T-3 CT. NO (1.37) (2.13) (2.9) (3.7).030 [.76] SOT.064 [1.63].043 [1.09] TRU.093 [2.36] Staking Tool No. T [4.0] CT. NO (1.30) (2.08) (2.8) (3.6).063 [1.60] TRU KNUR.090 [2.29] [.89] Staking Tool No. T [6.2] CT. NO (2.8) (3.5) (4.4).081 [2.06] TRU.156 [3.96] KNUR.112 [2.84] [1.27].312 [7.9] Staking Tool No. T-9 CT. NO (2.8) (3.5) (4.4).062 [1.57].070 [1.78] TRU.156 [3.96] KNUR.112 [2.84].343 [8.7] Staking Tool No. T-9 CT. NO (2.8) (3.5) (4.4).032 [.81].079 [2.01] TRU.188 [4.78] KNUR.112 [2.84].051 [1.30].328 [8.4] Staking Tool No. T-9 CT. NO (2.8) (3.5) (4.4).062 [1.57] SOT.142 [3.61].188 [4.78] KNUR.150 [3.81] [2.06] TRU.375 [9.6] Staking Tool Special Order CT. NO (2.8) (3.5) (4.4) SPECI TURRET TERMINS Custom turret terminals can be machined to your exact specifications. Standard and special terminals can be staked onto special boards. Please /fax your design to our Engineering Department. DOUBE-ENDED TURRETS Staking Tool No. T-2 Staking Tool No. T-2 Staking Tool Special Order Staking Tool No. T-4 CT. NO. CT. NO. CT. NO. CT. NO..120 [3.1].156 [4.0].090 [2.29] Staking Tool No. T-5 TUBUR TURRETS.043 [1.09] TRU.093 [2.36].156 [4.0] (1.37) (2.13) (2.9) (3.7).064 [1.63] TRU.266 [6.8] CT. NO (2.7) (3.5) (4.4).071 [1.80].188 [4.8].110 [2.8].043 [1.09] TRU.097 [2.5] Staking Tool No. T-8 CT. NO (1.98) (2.8) (3.5) (4.4).187 [4.8] (1.57) (2.39) (3.2) (3.9).140 [3.6].187 [4.8].078 [1.98].061 [1.55].045 [1.14].076 [1.93].140 [3.6].032 [.81] (1.30) (2.08) (2.8) (3.6).067 [1.70] TRU.050 [1.27].093 [2.36].062 [1.57] (3) PS.186 [4.7].082 [2.08] Staking Tool No. T-4 CT. NO (1.30) (2.08) (2.8) (3.6).093 [2.36].072 [1.83].093 [2.36].072 [1.83].050 [1.27] (2) PS.104 [2.7].082 [2.08] (1.30) (2.08) (2.8) (3.6).050 [1.27] (3) PS.186 [4.7].082 [2.08] Staking Tool No. T-4 CT. NO (1.30) (2.08) (2.8) (3.6) TURRET TERMINS.109 [2.8].156 [4.0].078 [1.98] [1.40] TRU.328 [8.4] Staking Tool No. T-5 CT. NO (1.91) (2.7) (3.4) (4.2).150 [3.8].187 [4.8].112 [2.9].078 [1.98] TRU.312 [7.9] Staking Tool No. T-8 CT. NO (1.98) (2.8) (3.5) (4.4).093 [2.36].072 [1.83] RoS COMPINT ~ ISO 9001 CERTIFIED.050 [1.27] (4) PS.186 [4.72].164 [4.17] Staking Tool No. T-4 CT. NO (1.30) (2.08) (2.8) (3.6).145 [3.68] (2) PS.187 [4.75].112 [2.84].082 [2.08] (2) PS Staking Tool No. T [9.2].312 [7.9] CT. NO (2.7) (3.4) (4.2) 139

146 Cut your production cost by eliminating the tooling and setup charge usually applied to non-standardized boards. Terminals are securely staked and tinned for easy soldering. MTERI: Choice of either PBE or GEE. PBE: Paper base electrical, MI /20, Type XP natural, Temp. 250 F (121 C) max. GEE: Glass epoxy, MI-I-24768/27, Type G-10, Temp. 300 F (155 C) max. Terminals: Brass, STM-B16, Tin Plate, MI-T Other platings can be furnished. SCORED TURRET TERMIN BORDS MODIFICTIONS Boards can be modified with other materials or terminals of your choice. Marking can also be added. Quotations upon request. STNDRD TURRET TERMIN BORDS SCORED TURRET TERMIN BORDS W W S W W S W VIEW SOWING SCORING [333.4] [66.7] [66.7] [66.7] [66.7] [66.7].187 [4.8] VIEW SOWING SCORING [39.7].375 [9.5].375 [9.5] Choice of 4 Types of Terminals Five sections SCORED for easy separation. Mounting holes in each section. VIEW SOWING SCORING [49.2] [198.4] [246.0].156 [4.0].312 [7.9].062 [1.57] [39.7] [39.7] [39.7] [39.7].120 [3.1] [49.2] [49.2] [49.2] [49.2] Choice of 6 Types of Terminals Five sections SCORED for easy separation. Mounting holes in each section. ole thru ole thru.093 [2.36] NO. OF CT. CT. CT. CT. W S TERMS MTERI NO. NO. NO. NO..500 Single PBE (12.7) Row 25 GEE PBE (38.1) (25.4) 50 GEE PBE (38.1) (30.1) 50 GEE PBE (50.8) (38.1) 50 GEE PBE (63.5) (50.8) GEE PBE (76.2) (63.5) 50 GEE MINITURE TURRET TERMIN BORDS.144 [3.7].062 [1.57] NO. OF CT. CT. CT. CT. CT. CT. W S TERMS MTERI NO. NO. NO. NO. NO. NO..312 Single PBE (7.9) Row 25 GEE PBE (22.2) (14.3) 50 GEE PBE (28.6) (20.6) 50 GEE W S.218 [5.6] Choice of 5 Types of Terminals Five sections SCORED for easy separation. Mounting holes in each section..062 [1.57] NO. OF CT. CT. CT. CT. CT. W S TERMS MTERI NO. NO. NO. NO. NO..312 Single PBE (7.9) Row 25 GEE PBE (22.2) (12.7) 50 GEE PBE (25.4) (19.1) 50 GEE RoS COMPINT ~ ISO 9001 CERTIFIED

147 MINITURE TURRET TERMIN BORDS MTERI: Choice of either PBE or GEE. PBE: Paper base electrical, MI /20. Type XP natural, Temp. 250 F (121 C) max. GEE: Glass Epoxy, MI-I-24768/27, Type G-10, Temp. 300 F (155 C). max. Terminals: Brass, STM-B16. Tin Plate, MI-T Other platings can be furnished. MODIFICTIONS Boards can be modified with other materials or terminals of your choice. Marking can also be added. Quotations upon request. DOUBE TURRET TERMIN W W.156 [4.0] S.312 [7.9] Terminals are staked in all except end mounting holes. W Terminals are staked in all except end mounting holes. W W S W S VIEW SOWING SCORING.144 [3.7].062 [1.57] [66.7] [66.7] [66.7] [66.7] [66.7].187 [4.8].375 [9.5].375 [9.5].120 [3.1] TYP..218 [5.6] Terminal boards are manufactured as per Military specifications MS [1.70] SPECIFICTIONS Board Material: MI-I-24768/27 TYPE GEE or TYPE GEB. MI /3.125 (3.2) Terminal: SE12XC09 PER MI-T Tin/ead Plated (Non-RoS Compliant) Five sections SCORED for easy separation. Mounting holes in each section..062 [1.57] 1562 MIITRY TERMIN BORDS [3.18] 1573 TRU OE TERMIN NO. OF MTERI MTERI TERMS PBE GEE W S EC SIDE CT. NO. CT. NO (49.2) (93.6) Single (138.1) (7.9) Row (182.5) (227.0) (49.2) (22.2).562 (14.3) (93.6) (138.1) (182.5) (227.0) (49.2) (28.6).812 (20.6) (93.6) (138.1) (182.5) (227.0) NO. OF MTERI MTERI TERMS PBE GEE W S EC SIDE CT. NO. CT. NO (39.7) (7.9) Single Row (78.6) (117.5) (156.4) (195.2) (39.7) (19.1).500 (12.7) (78.6) (117.5) (156.4) (195.2) (39.7) (78.6) (117.5) (25.4) (19.1) (156.4) (195.2) NO. OF MTERI MTERI TERMS GEB GEE W S EC SIDE CT. NO. CT. NO (66.7) 5 MS B1 MS E1.500 Single (133.4) 10 MS B2 MS E2 (12.7) Row (200.0) 15 MS B3 MS E (266.7) 20 MS B4 MS E (333.4) 25 MS B5 MS E (66.7) 5 MS B1 MS E (133.4) 10 MS B2 MS E (200.0) 15 MS B3 MS E3 (38.1) (25.4) (266.7) 20 MS B4 MS E (333.4) 25 MS B5 MS E (66.7) 5 MS B1 MS E (133.4) 10 MS B2 MS E (200.0) 15 MS B3 MS E3 (50.8) (38.1) (266.7) 20 MS B4 MS E (333.4) 25 MS B5 MS E (66.7) 5 MS B1 MS E (133.4) 10 MS B2 MS E (200.0) 15 MS B3 MS E3 (63.5) (50.8) (266.7) 20 MS B4 MS E (333.4) 25 MS B5 MS E (66.7) 5 MS B1 MS E (133.4) 10 MS B2 MS E (200.0) 15 MS B3 MS E3 (76.2) (63.5) (266.7) 20 MS B4 MS E (333.4) 25 MS B5 MS E5 TURRET TERMIN BORDS RoS COMPINT ~ ISO 9001 CERTIFIED 141

148 TURRET TERMIN BORDS Save Tooling Economical Complete Range of Sizes Ready-Made Terminal Boards: ow cost, meets commercial and military specifications. Produced in large quantities, making it possible to eliminate tooling and setup charges usually applied to non-standard boards. TERMIN BORDS & STRIPS W W S Terminals are staked in all holes except end mounting holes..120 [3.1].187 [4.8].375 [9.5].093 [2.36] MTERI: Choice of either PBE or GEE. PBE: Paper base electrical,mi /20, Type XP natural, Temp. 250 F (121 C) max. GEE: Glass epoxy, MI-I-24768/27, Type G-10, Temp. 300ºF (155 C) max. Terminals: Brass, STM-B16. Tin Plate, MI-T Other plating can be furnished. MODIFICTIONS Boards can be modified with other materials or terminals of your choice. Marking can also be added. Quotations upon request..187 [4.8].500 [12.7].375 [9.5].120 [3.1] (2) PS.093 [2.36] MTERI: PBE PBE: Paper base electrical, FED. P-513, Type XP natural, Temp. 250 F (121 C) max. Terminals: Brass, STM-B16. Tin Plate, MI-T Other plating can be furnished ole thru ole thru NO. OF TERMS CT. NO. CT. NO. CT. NO. CT. NO (28.6).750 (19.1) (38.1) (28.6) (47.6) (38.1) (57.2) (47.6) (66.7) (57.2) (76.2) (66.7) (85.7) (76.2) (95.3) (85.7) (104.8) (95.3) (114.3) (104.8) QUICK-FIT TERMIN STRIPS BORDS ON TIS PGE RE NOT SCORED NO. OF MTERI MTERI TERMS PBE GEE W S EC SIDE CT. NO. CT. NO (66.7) (133.4) [12.7] Single Row (200.0) (266.7) (333.4) (66.7) (133.4) (30.2).750 (19.1) (200.0) (266.7) (333.4) (66.7) (133.4) (38.1) (25.4) (200.0) (266.7) (333.4) (66.7) (133.4) (50.8) (38.1) (200.0) (266.7) (333.4) (66.7) (133.4) (63.5) (50.8) (200.0) (266.7) (333.4) (66.7) (133.4) (76.2) (63.5) (200.0) (266.7) (333.4) MTERI: Fiberglass - NEM GRDE GPO-3. glass polyester rated for continuous operation at 300 F (155 C).062 (1.57) Backing Strips:.031 (.79) fibre with mounting holes drilled only Terminals: Brass CT. NO (.81) Bright Brass Other platings available on special order.187 [4.8].500 [12.7].375 [9.5].128 [3.3] (2) PS.062 [1.57].250 (6.4) TBS BCKING INSUTOR.031 (.79) FIBER NO. TERM. BCKING STRIP MTG. EC CT. CT. ENGT CENTERS SIDE NO. NO (38.1) (28.6) (57.2) (47.6) (76.2) (66.7) (95.3) (85.7) (114.3) (104.8) RoS COMPINT ~ ISO 9001 CERTIFIED

149 TERMIN STRIPS (STNDRD & MINITURE) Tin plated lugs and brackets. Bakelite XP.062 (1.57) thick. In addition to the strips shown, we manufacture many other varieties in any configuration and materials required. Send samples or sketch for prompt quotation. STNDRD.375 [9.5].375 [9.5] MINITURE.375 [9.5].312 [7.9].140 [3.6].096 [2.5] FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 10 FIG. 11 FIG. 17 FIG. 22 FIG. 23 FIBERGSS: Reinforced Polyester NEM Graded GPO-3 rated for 300 F. (155 C). STNDRD FIG. 12 FIG. 13 FIG. 14 FIG. 15 FIG. 18 FIG. 19 FIG. 20 FIG [4.8].625 [15.9].062 [1.57] BINDING POST STRIPS MTERI SPECIFICTIONS FOR BINDING POST STRIPS GEE: Glass, Epoxy, MI-I-24768/27 Type G-10. Temp. 300 F. (155 C)..437 [11.1].140 [3.6] (2) PS FIG. 24 FIG. 25 FIG. 26 FIG. 27 FIG. 28 FIG. 29 FIG. 35 FIG. 36 FIG. 37 FIG. 9 FIG. 16 FIG. 31 FIG. 30 FIG. 32 FIG. 33 FIG. 34 PBE: Paper base electrical, FED. P-513 Type XP natural, Temp 250 F. max. (121 C). XP GSS FIBER- NO. PENOIC EPOXY GSS MTG. OF CT. NO. CT. NO. CT. NO. ENGT CENTERS TERM (31.8).875 (22.2) (42.8) (33.3) (54.0) (44.5) (65.1) (55.5) (76.2) (66.7) (87.3) (77.8) (98.4) (88.9) (109.5) (100.0) (120.7) (111.1) (131.7) (122.2) 10 STNDRD FIG MINITURE CT. NO. NO. CT. NO Terminals supplied on these strips CT. NO TERMIN STRIPS EVY DUTY.875 [22.2].093 [2.36].500 [12.7].171 [4.4] (2) PS RoS COMPINT ~ ISO 9001 CERTIFIED GSS FIBER- NO. EPOXY GSS MTG. OF CT. NO. CT. NO. ENGT CENTERS TERM (38.1) 1.00 (25.4) (50.8) 1.50 (38.1) (63.5) 2.00 (50.8) (76.2) 2.50 (63.5) (88.9) 3.00 (76.2) (101.6) 3.50 (88.9) (114.3) 4.00 (101.6) (127.0) 4.50 (114.3) (139.7) 5.00 (127.0) (152.4) 5.50 (139.7) 10 Terminals supplied on these strips CT. NO

150 CONVERSION CRT MIIMETERS DECIMS FRCTIONS mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions /64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/ /64 17/64 19/64 21/64 23/64 25/64 7/32 9/32 1/4 5/16 11/32 3/ /64 29/64 31/64 33/64 35/64 37/64 39/64 13/32 7/16 15/32 1/2 17/32 9/16 19/ /64 43/64 45/64 47/64 49/64 51/64 5/8 21/32 11/16 23/32 3/4 25/ /64 55/64 57/64 59/64 61/64 63/64 13/16 27/32 7/8 29/32 15/16 31/32 1 PC ardware Coin Cell olders & Retainers Plugs & Jacks Battery Clips & olders Computer Brackets & ardware Fuse Clips & olders Terminals & ugs Spacers & Standoffs Panel & Insulating ardware Micro Pins & Jacks Tape & Reel SMT Products Test Points udio Jacks uto Fuse Clips USB and IEEE 1394 Plugs & Sockets RoS COMPINT ~ ISO 9001 CERTIFIED

151 ENGINEERING DT DRI SIZE DIMETER TBE Diameter Drill Size / / / / / Drill Diameter Size / / / / / / / Drill Diameter Size / / / B.2420 C.2460 D / E.2570 F.2610 G / I.2770 J.2810 K / M / N / O.3230 P / Q.3390 R / S.3580 T / U / V.3860 W / X Diameter Drill Size.4040 Y / Z / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /1 SCREW/STUD CERNCE OE TBE Recommended Screw/Stud Screw/Stud Clearance Size Dia. Max. ole Dia / QUITY SSURNCE Keystone s quality system is certified to ISO 9001:2000 by DNV Certification, Inc. under the RB and Rv accreditations. Our Quality ssurance Program is in accordance with these requirements and applies to all standard and custom interconnect components and electronic hardware. It is Keystone s Quality Policy to continuously improve its products to better satisfy the needs of its customers and to deliver quality products, every time and on time. Baty Gage Master Comparator Thread, Plug and Ring Gauges Granite Surface Plates Dial Indicators Plating Thickness Tester QUITY SSURNCE mes Precision ardness Tester Gauge Blocks and Pin Gauges Micrometers and Verniers Depth and eight Gauges ISO 9001:2008 Certified ENGINEERING DT /QUITY SSURNCE RoS COMPINT ~ ISO 9001 CERTIFIED

152 CT PGE CT. PGE CT. PGE NO. NO. NO NO. NO NO. 14 thru thru thru thru thru thru thru thru thru thru thru thru thru thru C thru thru thru thru thru P thru thru thru thru thru thru thru P thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru C thru C C C C C C C thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru NUMERIC INDEX RoS COMPINT ~ ISO 9001 CERTIFIED

153 NUMERIC INDEX thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru C C thru thru thru thru thru thru thru thru thru thru thru thru C thru thru thru thru thru thru thru thru thru thru C thru thru thru thru CT PGE CT. PGE CT. PGE NO. NO. NO NO. NO NO. RoS COMPINT ~ ISO 9001 CERTIFIED

154 NUMERIC INDEX CT. 4628C thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru PGE CT. PGE CT. PGE NO. 4628C 7689 NO. NO NO. NO T-22 NO thru SEMS thru 7693-SEMS thru SEMS SEMS thru SEMS thru 7702-SEMS thru thru thru SEMS thru thru thru thru thru thru thru thru thru thru SEMS thru 8199-SEMS thru thru thru thru thru thru thru 8440G thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CB MS B1 thru -5B MS E1 thru 5E PC SCR SPR ST STR T-1 thru T T-3 thru T T-5 thru T T T T T-19 thru T RoS COMPINT ~ ISO 9001 CERTIFIED

155 For over sixty years, Keystone has been designing and manufacturing quality interconnects and electronic hardware. Our engineering and design specialists utilize the most advanced design and production capabilities such as 3D CD modeling to develop innovative and reliable products for the marketplace. dd to this a commitment to solving design challenges, backed by skilled and experienced production and customer service teams. Precision tool and die CD/CM capabilities, close tolerance stamping, machining and assembly, computer based quality control and responsive customer service are all vital in-house resources which constitute Keystone s capabilities. While our catalog products meet most standard requirements, our pplication Engineering Group is always available to modify our existing items or to design and develop specific products for your applications. Our products are in compliance with the RoS and REC directives and our quality system is ISO 9001:2008 certified. It is Keystone s quality policy to continuously improve its products to better satisfy the needs of its customers and to deliver quality products, every time, on time. Visit our website at for additional information and on-line services, such as: Stock Check Capabilities Engineering Drawing requests Sample and Quotation requests Complete listing of our uthorized Stocking Distributors worldwide ll products unconditionally guaranteed against defects in material and workmanship. Keystone components are guaranteed to be free from defects in material and workmanship for supplements without prior notice providing the performance or appearance will not change the a reasonable period of time after delivery. Our liability shall be limited to replacement of defective function of the item. material only. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct Keystone has carefully prepared the catalog specifications contained herein. These specifications are for reference only, any inaccuracies may be due to typographical errors or changes or consequential, rising out of the use of or the inability to use the products. Before using, user shall determine the suitability of the product for their intended use, user assumes all risk and made after the publication of this catalog. liability whatsoever in connection therewith. Copyright 2013 by Keystone Electronics Corp. Printed in U.S.. We reserve the right to change specifications on any and all items shown in this catalog or any FEDER SUPPY CODE FSCM RoS COMPINT ~ ISO 9001 CERTIFIED

156 DISTRIBUTED BY: Corporate and Manufacturing eadquarters th Road, storia, New York Tel: (718) (800) Fax: (718) Website: INTERNTION OFFICES KEYSTONE/EUROPE (EME) KEYSTONE/CND KEYSTONE/SI PCIFIC KEYSTONE/USTRI 80, Rue Orfila, Paris, France Tel: 33 (1) Fax: 33 (1) Granton Drive Richmond ill, Ontario Canada 4B17 Tel: (905) Fax: (905) Flat E, 5/F., Everest Industrial Centre No.396 Kwun Tong Road, Kowloon, ong Kong Tel: Fax: Gray Street Kilkenny, South ustralia 5009 Tel: Fax: There s a keystone in every great invention Follow, TiNK & earn at: