Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
|
|
- Britney Miles
- 5 years ago
- Views:
Transcription
1 Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: Fax: marketing@seielect.com
2 SMD Power Inductor PDH Applications Notebook computers. Handheld communications. CD televisions. Power supply for VTRs. DC/DC converters, etc. Features Miniature surface mount design. High power, High saturation inductors. Very low resistance. Maximum power density. Ideal inductors for DC-DC conversion. Available on tape and reel for auto surface mounting. Inductance and rated current ranges PDH µH~100µH 6.0~0.47A PDH µH~100µH 10.6~1.2A PDH µH~100µH 16.0~1.4A PDH µH~100µH 19.2~2.0A Characteristics: Saturation Rated Current (I sat): The current when the inductance becomes 30%lower then its initial value. (Ta=25 ) Temperature Rise Current (I rms): The actual current when temperature of coil becomes 40. (Ta=25 ) Operating temperature range: -20 ~ 125C. How to Order PDH 1813 M T 101 SEI Type Dimensions Tolerance Packaging Style Inductance Type Code Dimensions (mm) Code Tolerance Packaging Code Inductance SMD Power Inductors x 6.1 M 20% T = Tape and Reel 1R1 1.1uH x 9.9 P +40% -20% uH x mH x 15.0 Tel: Fax: marketing@seielect.com 2
3 Dimension A I J I C 4R7 E B D PAD AYOUT H Unit: mm Codes A max B max C max D E H I J PDH PDH PDH PDH Electrical Characteristics PDH 1813/ 3316 / 4920 / 5022 TYPE Part No. Tol. DC Resistance (Max) (mω) I rms Rated DC Current Max I sat R47 P R0 P R5 P R2 M R3 M R7 M R8 M M M M M M M M *Measuring Freq: 100KHz 0.25V ; M:±20%,P:+40%-20% Test equipment: : HP4284A CR meter. DCR: Milli-ohm meter. Electrical specifications at 25. Tel: Fax: marketing@seielect.com 3
4 SMD Power Inductor PD Applications Portable telephones. Personal computers. DC/DC converters, etc. Other various electronic appliances. Features High power, High saturation inductors. Ideal inductors for DC-DC conversion in notebook computer, PDAs, Step-up or step-down converters, flash memory programmers, etc. PD1608 used ceramic base with gold-plating. The others used CP plastic base. Inductance and rated current ranges PD µH 1000µH A PD µh 1000µH A PD µH 1000µH A PD µh 1000µH A PD µH 1000µH A Test equipment: : HP4284A CR 100KHz 0.1V DCR Resistance: Milli-ohm meter or equivalent. SRF: HP4291B RF Impedance Analyzer. Electrical Specifications at 25. Characteristics: Saturation Rated Current (I sat): The current when the inductance becomes 10%lower then its initial value. (Ta=25 ) Temperature Rise Current (I rms): The actual current when temperature of coil becomes 40. (Ta=25 ) Operating temperature range: -20 ~ 125C. How to Order PD 1608 M T 101 SEI Type Dimensions Tolerance Packaging Style Inductance Type Cod Dimensions (mm) Code Tolerance Packaging Code Inductance SMD Power Inductors x 4.45 x 2.92 M 20% T = Tape and Reel 1R1 1.1uH x 9.40 x 3.50 K 10% uH x x uH x 9.40 x x 9.40 x Tel: Fax: marketing@seielect.com 4
5 Dimensions Unit: mm Codes A max B max C max D E F H I J PD PD PD PD PD Electrical Characteristics PD1608 TYPE Part No. Tolerance DCR (Ω) SRF ref (MHz) 1R0 M R5 M R2 M R3 M R7 M R8 M M M K K K K K K K K K K K PD3308 TYPE Part No. Tolerance DCR (Ω) SRF ref (MHz) I sat I rms 100 M M M M M M M M M M M M M I sat I rms Tel: Fax: marketing@seielect.com 5
6 Electrical Characteristics PD3316 TYPE Part No. Tolerance DCR (Ω) SRF ref (MHz) 1R0 M R5 M R2 M R3 M R7 M R8 M M M M M M M M M M M M M M PD3340 TYPE Part No. Tolerance DCR (Ω) SRF ref (MHz) 100 M M M M M M M M M M M M M PD5022 TYPE Part No. Tolerance DCR (Ω) SRF ref (MHz) 1R0 M R2 M R3 M R6 M M M M M M M M M M M M M I sat I sat I sat I rms I rms 102 M I rms Tel: Fax: marketing@seielect.com 6
7 SMD Power Inductor-PCD Applications Power supply for VTRs. CD televisions. Personal computers. Handhold communication. DC/DC converters, etc. Features Inductance and rated current ranges PCD µH A PCD µH A PCD µH A High power, High saturation inductors. Silver Plated Type, ow cost design. Ideal inductors for DC-DC conversion. Available on tape and reel for auto surface mounting. PCD µH A PCD µH A PCD µH A PCD µH A PCD µH A PCD µH A Test equipment: : HP4284A or HP4285A CR meter. DCR tested by Milli-ohm meter. Electrical specifications at 25. Characteristics: Rated DC Current: The DC current when the inductance decreases to 90% of its initial value or DC current when temperature of coil is increased to 30. (Ta=25 ) The smaller one is defined as Rated DC Current. Operating Temperature: -40 to How to Order PCD 1005 M T 101 SEI Type Dimensions Tolerance Packaging Style Inductance Type Code Dimensions (mm) Code Tolerance Packaging Code Inductance SMD Power Inductors x 4.0 x 3.2 M 20% T = Tape and Reel 1R1 1.1uH x 5.2 x % uH x 7.0 x 3.5 K 10% uH x 7.0 x x 9.0 x x 9.0 x 5.4 Tel: Fax: marketing@seielect.com 7
8 Dimension Unit: mm Codes A B C H I J PCD ± ± ± PCD ± ± ± PCD ± ± ± PCD ± ± ± PCD ± ± ± PCD ± ± ± PCD ± ± ± PCD ± ± ± PCD ± ± ± Electrical Characteristics 0703 / 0705 / 1004 / 1005 TYPE Part No. DC Resistance (Ω) Max Rated DC current Max Measuring Freq: V ; V Tolerance of inductance: PCD µH (K)±10% PCD µH (K)±10% PCD µH(M)±20% ; 56µH 560µH(K)±10% PCD µH(M)±20% ; 47µH 820µH(K)±10% Tel: Fax: marketing@seielect.com 8
9 Electrical Characteristics 0302 / 0403 / 0502 / 0503 / 0504 TYPE Part No. DC Resistance (Ω) Max Rated DC current Max R R R R R R R R R R R R R Measuring Freq: V ; V ; V Tolerance of inductance: PCD µH (M)±20% ; 22µH 330µH(K)±10%. PCD µH (M)±20% ; 33µH 68µH(K)±10%. PCD µH (M)±20% ; 22µH 470µH(K)±10%. PCD µH (M)±20% ; 22µH 470µH(K)±10%. PCD µH (M)±20% ; 33µH 220µH(K)±10%. Tel: Fax: marketing@seielect.com 9
10 Packaging Info Tape and Reel specifications Dimensions are in mm Tel: Fax:
11 Tape and Reel specifications Series(Maximum W H mm) Tape size Parts Per Reel Per Caron W P 7 13 G.W. Q ty G.W. PDH1813 ( ) kg 24k 20kg PDH3316 ( ) kg 6k 16kg PDH4920 ( ) kg 2.8k 17kg PDH5022 ( ) kg 2k 22kg PD1608 ( ) g 32k 16kg PD3308 ( ) kg 12k 20kg PD3316 ( ) kg 6k 18kg PD3340( ) kg 3k 16kg PD5022 ( ) kg 2k 17kg PCD0302 ( ) g 40k 13kg PCD0403 ( ) g 40k 18kg PCD0502/0503 ( ) g 40k 20kg PCD0504 ( ) g 30k 22kg PCD0703 ( ) g 16k 18kg PCD 0705 ( ) kg 16k 24kg PCD 1004 ( ) kg 9k 18kg PCD 1005 ( ) kg 9k 24kg Tel: Fax: marketing@seielect.com 11
12 SMT Power Inductor Environmental Specifications General Items Specifications 1. Shelf Storage conditions Temperature range: 25±3; Humidity: <80% relative humidity. Recommended product should be used within six months from the time of delivery. 2. Storage temperature range Temperature range: -40 to Operating temperature range Temperature range: -40 to Environmental test Test Items Specifications Test Conditions / Test Methods 1. High temperature Storage test Temperature 85±2, Time: 48±2 hours, Tested after 1hour at room temperature. 2. ow temperature Temperature -25±2, Storage test No case deformation or change in appearance. Time: 48±2 hours, Tested after 1hour at room temperature. 3. Humidity test / 10% / 30% (PS1608) Temperature 40±2, 90~95% relative humidity Time: 96±2 hours, apply rated current, Tested after 1hour at room temperature. 4. Thermal shock test First minutes then minutes last minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. Mechanical test Test Items Specifications Test Conditions / Test Methods 1. Solderability test Product with ead plating: Dip pads in flux then dip in solder pot (63Sn/37Pb Terminal area must have 90% minimum solder coverage. solder) at 230±5 for 5 seconds. Product with ead-free terminal: Dip pads in flux then dip in solder pot (100Sn solder) at 260±5 for 5 seconds. 2. Heat endurance of Refer to the reflow soldering condition. Go Reflow soldering No case deformation or change in through 3 times. 3. Vibration test appearance. / 10% Apply frequency 10~55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. 4. Shock resistance Drop down with 981m/s 2 (100G) shock attitude / 30% (PS1608) upon a rubber block method shock testing machine, for 1 time. In each of three orientations. The codition of reflow (recommendation): ead-free ead Temp. ( ) Temp. ( ) Time (sec) Solder : Sn96.5/Ag3/Cu Time (sec) Solder : Sn63/Pb37 Tel: Fax: marketing@seielect.com 12
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More informationAXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
More informationPOWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationCatalogue For Metal Alloy Inductor
Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application.
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationRADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
More informationPower Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
More informationSMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
More informationP7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More informationSMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationTYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
More informationSCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationFeature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
More informationPower Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
More informationWL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More informationRF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13
SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 Wirewound Chip Inductor Features - Wire wound Ceramic Construction Provide High s. - Ultra-compact Inductors Provide Exceptional Values. - Low
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationWLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
More informationHigh Current Inductors / PIL Series
.Features: 1. Surface mount inductor with high current rating. 2. Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in hard disk, notebook
More informationSPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
More information(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationMultilayer Ferrite Chip Inductor
Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment
More informationFIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
More informationUNI-PAC Power Inductors (Surface Mount) NOW AVAILABLE WITH A PROTECTIVE CASE
UNI-PC Description Miniature surface mount design range from 0.470uH to 000uH Current range from 9. to.47 mps imum power density Ideal for applications requiring low inductance and high current in a miniature
More informationAfter 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationOct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More information1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
More informationPower Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
More informationFHW 0805 UC 068 J G T. (Unit): mm/inch. Minature size, suitable for SMT
Wire wound chip inductor is a perfect combine by means of combining hing precision coil framework with superb wound technology. Comparable with traditional inductor, it is improved technology, reduced
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. LCN Series. Lead-free / For RF Signals / Customer Design
YAGEO CORPORATION SMD INDUCTOR / EADS Wound Chip Inductors High Frequency LCN Series Lead-free / For RF Signals / Customer Design Due to technical expertise of accurately wounding skill,these chip inductors
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationWLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
More informationItem: Type: SAW Resonator TO39, F11, F12. Optional
SPECIFICATION Item: Type: TO39, F11, F12 Optional Scope This specification shall cover the characteristics of 1-port SAW resonator. TO39 F11 F12 The 1-port is designed to be the frequency control element
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationSMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
More informationIron Powder Core SMD Power Inductors
Iron powder core inductors feature a homogeneous construction, exhibiting low loss and reduced inductance drop due to applied current, allowing for higher current ratings in low profile packages. PRODUCT
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationWIRE WOUND CHIP CERAMIC INDUCTORS FEATURES APPLICATIONS ORDERING CODE DIMENSIONS
WIRE WOUND CHIP CERAMIC INDUCTORS FEATURES ature size, suitable for SMT; Using teral electrode structure to restrain the parasitic component effect quite caused by lead; High value and Tight inductance
More informationMultilayer Suppressors and Inductors. Technical Note
Multilayer Suppressors and Inductors Technical Note A Y A G E O C O M P A N Y Multilayer Suppressors and Inductors Contents Introduction 3 Multilayer Suppressors Features 4 Applications 5 Type Number structure
More information2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationAXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
More informationSMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S
Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationFlat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
More information