P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
|
|
- Preston Bailey
- 5 years ago
- Views:
Transcription
1 PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications DC-DC Converters High Current/Low Voltage Converters Notebook and handheld equipment Flash memory programmers DESCRIPTION The P7604 family comprises high current, shielded power inductors. Components are available in five mechanical sizes and offer exceptionally compact solutions for applications requiring high energy storage. The miniature 1608 parts employ a ceramic base for optimum heat transfer and have very high current rating for their size; the 3308 and 3316 parts have the same footprint but differ in height, 3308 being only 3mm. The family provides reliable Pb-free terminations suitable for Pb-free and conventional placement and reflow. P P P P P ETALDOC 833/1 Page 1 of 7 August 2003
2 CONSTRUCTION P dimensions Fig max P dimensions Fig ±0.2 P dimensions Fig ± max 4.45 max ± ± P dimensions Fig ±0.3 Dimensions shown are in millimetres Terminal plating is pure tin (Sn) except 1608 size (gold plating). 15.0±0.3 Recommended reflow solder profile: 2 minutes ºC, 10 seconds 230ºC; time above 200ºC 30 seconds maximum ± ± ± P dimensions Fig ± ± ± ETALDOC 833/1 Page 2 of 7 August 2003
3 SPECIFICATIONS Electrical 1608 size Part Number Inductance (µh) (1) DCR (Ω) Max SRF (MHz) (2) Rated Current I RMS (A) (3) P R0M 1.0±20% P R5M 1.5±20% P R2M ±20% P R3M 3.3±20% P R7M 4.7±20% P R8M 6.8±20% P M 10±20% P M 15±20% P M 22±20% P M 33±20% P M 47±20% P M 68±20% P M 100±20% P M 150±20% P M 220±20% P M 330±20% P M 470±20% P M 680±20% P M 1000±20% P M 1500±20% P M 2200±20% P M 3300±20% P M 4700±20% P M 6800±20% P M 10000±20% SRF (Self resonant Frequency) is ical and for reference only. 3. Rated current is the current at which the temperature rise is 30ºC ical. Note that for this 1608 size, the DC current at which saturation occurs is lower than the rated AC current. 4. Operating temperature -25ºC to +85ºC. 5. For non-standard inductance values, please contact Profec. ETALDOC 833/1 Page 3 of 7 August 2003
4 2012 size P R2M ±20% P R9M 3.9±20% P R6M 5.9±20% P R2M 8.2±20% P M 10±20% P M 12±20% P M 15±20% P L 18±15% P L 22±15% P L 27±15% P L 33±15% P L 39±15% P L 47±15% P K 56±10% P K 68±10% P K 82±10% P K 100±10% P K 120±10% P K 150±10% P K 180±10% P K 220±10% P K 270±10% P K 330±10% P K 390±10% P K 470±10% P K 560±10% P K 680±10% P K 820±10% P K 1000±10% SRF (Self resonant Frequency) is ical and for reference only. 3. Rated current is the current at which the temperature rise is 40ºC ical. 4. Saturation Current, I sat, is the DC current at which the zero current inductance drops by 10% (). ETALDOC 833/1 Page 4 of 7 August 2003
5 3308 size P R2M ±20% P R0M 3.0±20% P R9M 3.0±20% P R7M 4.7±20% P R8M 6.8±20% P M 10±20% P M 12±20% P M 15±20% P M 18±20% P M 22±20% P M 27±20% P M 33±20% P M 39±20% P M 47±20% P M 56±20% P M 68±20% P M 82±20% P M 100±20% P M 120±20% P M 150±20% P M 180±20% P M 220±20% P L 270±15% P L 330±15% P L 390±15% P L 470±15% SRF (Self resonant Frequency) is ical and for reference only. 3. Rated current is the current at which the temperature rise is 40ºC ical. 4. Saturation Current, I sat, is the DC current at which the zero current inductance drops by 10% (). ETALDOC 833/1 Page 5 of 7 August 2003
6 3316 size P R0M 1.0±20% P R5M 1.5±20% P R2M ±20% P R0M 3.0±20% P R7M 4.7±20% P R8M 6.8±20% P M 10±20% P M 12±20% P M 15±20% P L 18±15% P L 22±15% P L 27±15% P L 33±15% P L 39±15% P L 47±15% P L 56±15% P L 68±15% P L 82±15% P K 100±10% P K 120±10% P K 150±10% P K 180±10% P K 220±10% P K 270±10% P K 330±10% P K 390±10% SRF (Self resonant Frequency) is ical and for reference only. 3. Rated current is the current at which the temperature rise is 40ºC ical. 4. Saturation Current, I sat, is the DC current at which the zero current inductance drops by 10% (). ETALDOC 833/1 Page 6 of 7 August 2003
7 5022 size P M 10±20% P M 15±20% P M 22±20% P M 33±20% P M 47±20% P M 68±20% P M 100±20% P M 150±20% P M 220±20% P M 330±20% P M 470±20% P M 680±20% P M 1000±20% SRF (Self resonant Frequency) is ical and for reference only. 3. Rated current is the current at which the temperature rise is 40ºC ical. 4. Saturation Current, I sat, is the DC current at which the zero current inductance drops by 10% (). ORDERING CODE ABSOLUTE MAXIMUM RATINGS P T Tape and Reel Storage temperature -40ºC to +105ºC Tolerance: K = ±10% L = ±15% M = ±20% See tabulated values for correct tolerance Operating temperature Soldering temperature profile peak -25ºC to +85ºC 260ºC 10s Inductance code Size : (1608, 2012, 3308, 3316 or 5022) Type code T R A N S F O R M I N G T H E F U T U R E ISO 9001 FM Profec Technologies Ltd., 10 Betts Avenue, Martlesham Heath, Ipswich, IP5 3RH, England Telephone: +44 (0) Fax: +44 (0) Website: info@profec.co.uk, sales@profec.com ETALDOC 833/1 Page 7 of 7 August 2003
P7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
More informationCOMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationMPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
More informationCoiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB types) Unique Ceramic Core/Laser-cut
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationIron Powder Core SMD Power Inductors
Iron powder core inductors feature a homogeneous construction, exhibiting low loss and reduced inductance drop due to applied current, allowing for higher current ratings in low profile packages. PRODUCT
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationPOWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
More informationPower Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationAXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationSMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationWK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationPrevention of electromagnetic interference to signals on the secondary side of electronic equiepmet.
Multilayer Ferrite Chip Inductors - CKFI Features 1. Monolithic structure for high reliability compact size inductor possible. 2. No cross coupling due to magnetic shield. 3. Perfect shape for mounting
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationSRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
More informationWA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WA04X Version 15 Sept.-2004 FEATURE 1. Small size and light
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationSMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
More informationRADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationWF25S WF20S WF12S ±5% 20% Power Surge Chip Resistors Size 2512, 2010, Customer : Approval No : Issue Date : Customer Approval :
WF25S WF20S WF12S ±5% 5%, ±10 10%, ±20 20% Power Surge Chip Resistors Size 2512, 2010, 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25S WF20S WF12S Ver.4 Sep.-2008 FEATURE
More informationSMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S
Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased
More informationFrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
More informationR Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
More informationTYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
More informationAXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationWW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
More informationWR02X ±5%, ±1% General purpose chip resistors Size 0201
WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationThick Film General purpose chip resistors
WR02X(W) ±5%, ±1% Thick Film General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_V18 MAY - 2016 FEATURE 1. Small size and
More informationWA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WA04X Version 20 Sep.-2008 FEATURE 1. Small size and light
More informationNKE Series. Isolated Sub-Miniature 1W Single Output DC/DC Converters FEATURES
www.murata-ps.com NKE Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF 1 Package Style FEATURES RoHS
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More information2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationMagnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
More informationWA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
More informationWR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating
More informationRF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
More informationFC Type 2520 (1008) Dimensions in mm (not to scale) Marking Recommended Land Pattern in mm (not to scale) ± ± ± ±0.1
3. General Use FC, F, F Features General use wire wound, resin molded chip inductor. Capable of being Re-fl ow or fl ow soldered. ide line-up from 2520 to 4532 case sizes. Good for mounting. RoHS compliant
More informationCONTENT Ferrites for cable assembly
www.schmid-m.com EMC & Inductors CONTENT Ferrites for cable assembly Round cable snap ferrites SMLF Flat Ferrite with Clip SRPS Flat Ferrite Cores SRP Toroidal Cores ST Axial Ferrite Beads SRH Ferrite
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationWT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WT04X Ver.13 Sep.-2008 FEATURE 1. Small size and light weight 2. Reduced
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationWire Wound Chip Inductor Ferrite
Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces
More informationWR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
More information(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationRF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com FEATURES RoHS compliant Efficiency up to 82% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 package material Reduced footprint at 0.98cm 2 Industry standard pinout
More informationRI-80 SMDH Series Housed Dry Reed Switch
formerly RI-80 SMDH Series Housed Dry Reed Switch RI-80 SMDH Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally
More information