Power Inductors RFB Series
|
|
|
- Chastity Terry
- 5 years ago
- Views:
Transcription
1 Document Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin wrap to protect the winding. Core material Ferrite Terminations Tin-silver over tin over copper over steel. Other terminations available at additional cost. Ambient temperature 40 C to +85 C with Irms current, +85 C to +125 C with derated current Storage temperature Component: 40 C to +85 C. Packaging: 40 C to +80 C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30 C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 150 parts per tray; optional fanfold tape PCB washing Only pure water or alcohol recommended RFB0807 RFB0810 RFB ,5 dia max XXX 0.43 dia max 11,0 XXX 0.45 max 11,5 MARKING 0.45 max 11,5 MARKING dia 0, ±0.02 4,0 ±0, ,8 dia ±0.02 4,0 ±0, ±0.02 5,0 ±0, ±0.02 6,0 ±0,5 Weight: g Weight: g Weight: g Document Revised 10/22/09
2 Document Power Inductors RFB0807 Series Part DCR max SRF typ 3 Isat 4 Irms (A) 5 number 1 Inductance 2 (Ohms) (MHz) (A) 20 C rise 40 C rise RFB0807-2R2L 2.2 µh ±20% RFB0807-2R7L 2.7 µh ±20% RFB0807-3R3L 3.3 µh ±20% RFB0807-3R9L 3.9 µh ±20% RFB0807-4R7L 4.7 µh ±20% RFB0807-5R6L 5.6 µh ±20% RFB0807-6R8L 6.8 µh ±20% RFB0807-8R2L 8.2 µh ±20% RFB L 10 µh ±10% RFB L 12 µh ±10% RFB L 15 µh ±10% RFB L 18 µh ±10% RFB L 22 µh ±10% RFB L 27 µh ±10% RFB L 33 µh ±10% RFB L 39 µh ±10% RFB L 47 µh ±10% RFB L 56 µh ±10% RFB L 68 µh ±10% RFB L 82 µh ±10% RFB L 100 µh ±10% RFB L 120 µh ±10% RFB L 150 µh ±10% RFB L 180 µh ±10% RFB L 220 µh ±10% RFB L 270 µh ±10% RFB L 330 µh ±10% RFB L 390 µh ±10% RFB L 470 µh ±10% RFB L 560 µh ±10% RFB L 680 µh ±10% RFB L 820 µh ±10% RFB L 1.0 mh ±10% RFB L 1.2 mh ±10% RFB L 1.5 mh ±10% RFB L 1.8 mh ±10% RFB L 2.2 mh ±10% RFB L 2.7 mh ±10% RFB L 3.3 mh ±10% RFB L 3.9 mh ±10% RFB L 4.7 mh ±10% RFB L 5.6 mh ±10% RFB L 6.8 mh ±10% RFB L 8.2 mh ±10% RFB L 10 mh ±10% RFB L 12 mh ±10% RFB L 15 mh ±10% RFB L 18 mh ±10% When ordering, please specify termination code: RFB L Termination: L = Tin-silver over tin over copper over steel. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-rohs tin-lead (63/37). To order parts packaged in fanfold tape (800 parts per box), add the letter F at the end of the part number. 2. Inductance tested at 100 khz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40 C temperature rise from 25 C ambient. 6. Electrical specifications at 25 C. Document Revised 10/22/09
3 Document Power Inductors RFB0807 Series Typical L vs Frequency Typical L vs Current Document Revised 10/22/09
4 Document Power Inductors RFB0810 Series Part Inductance 1 DCR max SRF typ 2 Isat 3 Irms (A) 4 number ±10% (Ohms) (MHz) (A) 20 C rise 40 C rise RFB L 10 µh RFB L 12 µh RFB L 15 µh RFB L 18 µh RFB L 22 µh RFB L 27 µh RFB L 33 µh RFB L 39 µh RFB L 47 µh RFB L 56 µh RFB L 68 µh RFB L 82 µh RFB L 100 µh RFB L 120 µh RFB L 150 µh RFB L 180 µh RFB L 220 µh RFB L 270 µh RFB L 330 µh RFB L 390 µh RFB L 470 µh RFB L 560 µh RFB L 680 µh RFB L 820 µh RFB L 1.0 mh RFB L 1.2 mh RFB L 1.5 mh RFB L 1.8 mh RFB L 2.2 mh RFB L 2.7 mh RFB L 3.3 mh RFB L 3.9 mh RFB L 4.7 mh RFB L 5.6 mh RFB L 6.8 mh RFB L 8.2 mh RFB L 10 mh RFB L 12 mh RFB L 15 mh RFB L 18 mh When ordering, please specify termination code: RFB L Termination: L = Tin-silver over tin over copper over steel. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-rohs tin-lead (63/37). To order parts packaged in fanfold tape (800 parts per box), add the letter F at the end of the part number. 2. Inductance tested at 100 khz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40 C temperature rise from 25 C ambient. 6. Electrical specifications at 25 C. Document Revised 10/22/09
5 Document Power Inductors RFB0810 Series Typical L vs Frequency Typical L vs Current Document Revised 10/22/09
6 Document Power Inductors RFB1010 Series Part Inductance 1 DCR max SRF typ 2 Isat 3 Irms (A) 4 number ±10% (Ohms) (MHz) (A) 20 C rise 40 C rise RFB L 10 µh RFB L 12 µh RFB L 15 µh RFB L 18 µh RFB L 22 µh RFB L 27 µh RFB L 33 µh RFB L 39 µh RFB L 47 µh RFB L 56 µh RFB L 68 µh RFB L 82 µh RFB L 100 µh RFB L 120 µh RFB L 150 µh RFB L 180 µh RFB L 220 µh RFB L 270 µh RFB L 330 µh RFB L 390 µh RFB L 470 µh RFB L 560 µh RFB L 680 µh RFB L 820 µh RFB L 1.0 mh RFB L 1.2 mh RFB L 1.5 mh RFB L 1.8 mh RFB L 2.2 mh RFB L 2.7 mh RFB L 3.3 mh RFB L 3.9 mh RFB L 4.7 mh RFB L 5.6 mh RFB L 6.8 mh RFB L 8.2 mh RFB L 10 mh RFB L 12 mh RFB L 15 mh RFB L 18 mh When ordering, please specify termination code: RFB L Termination: L = Tin-silver over tin over copper over steel. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-rohs tin-lead (63/37). To order parts packaged in fanfold tape, add the letter F at the end of the part number. 2. Inductance tested at 100 khz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40 C temperature rise from 25 C ambient. 6. Electrical specifications at 25 C. Document Revised 10/22/09
7 Document Power Inductors RFB1010 Series Typical L vs Frequency Typical L vs Current Document Revised 10/22/09
Power Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
SRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
![74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern](/thumbs/85/91716071.jpg "74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern")
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
High Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Power Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
NXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
FP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
INPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
SMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
Power Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
NXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
RADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
NXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
NXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
Coiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
Coiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
Power Inductor SMT Type
UPI F SRIS ULTRA HIGH CURRNT SMT POWR INDUCTOR. Applications:.PDA/Notebook/Desktop, and server applications..dc/dc converters in distributed power systems..dc/dc converter for Field Prograable Gate Array(FPGA).
Electrical 25 C Operating Temperature -40 C to 125 C. Application 2 Secondary Inductance Inductance Pri.
EFD Platforms - EFD, EFD0 and EFD Transformers and Inductors Power: 0W to 0W Three Different Platforms: THT and Low Profile Platforms:.mm to.mm Custom designs available Electrical Specifications @ C Operating
Shielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
Vishay Dale Inductors
IM Inductors Military, MIL-C- ualified, Type LT and Commercial, Molded FETURES Wide inductance range in small package. Flame retardant coating. Precision performance, excellent reliability, sturdy construction.
NXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
MPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
MTC K - CXX - X - E - XX
MTC Inductors - Radal type Applcaton Feld TVs and audo Telecommuncatons devce. Swtchng Power Supples. Buzzers and Alarm systems Other nose flters. Characterstcs: Inductance range : 1.0uH to 10000uH Current
Low-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
UNI-PAC Power Inductors (Surface Mount) NOW AVAILABLE WITH A PROTECTIVE CASE
UNI-PC Description Miniature surface mount design range from 0.470uH to 000uH Current range from 9. to.47 mps imum power density Ideal for applications requiring low inductance and high current in a miniature
Catalogue For Metal Alloy Inductor
Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application.
FrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
P7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
FIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
SELECTION GUIDE. Nominal Input Voltage. Voltage Order Code1. Output
CRE1 Series www.murata-ps.com FEATURES UL 69 recognised3 Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 1W load - C to 8 C4 Industry Standard Pinout 3.3V,
Flat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
RF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code 1. V V ma
www.murata-ps.com CRE1 Series SELECTION GUIDE FEATURES UL 69 recognised 3 Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 1W load -4 C to 85 C 4 Industry Standard
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
Features. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%
SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current
Wire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
output Output Voltage min (ma)
SERIES: VBT1-SMT DESCRIPTION: DC-DC CONVERTER date 11/01/2012 page 1 of FEATURES 1 W isolated industry standard 8 pin SMT package dual unregulated s 1,000 V isolation short circuit protection UL safety
P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
NTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
Advance Data Sheet: idq Series Filter Module. idq Series Filter Module 75V Input, 10A Output
idq Series Filter Module 75V Input, 10A Output idq48 filter modules are designed to help reduce differential and common mode conducted emissions from high frequency switching power supplies. The modules
MGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC/DC Converters
www.murata-ps.com MGJ1 Series FEATURES Patent pending Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives Reinforced insulation to UL69 recognised ANSI/AAMI ES661-1 recognition pending
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
SELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
INDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
S24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
AXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
AXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
SMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
SELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
Series AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
Surface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
Series AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
MEE1 Series Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MEE1 Series FEATURES UL69 recognised Operation to zero load Single isolated output 1kVDC isolation Hi Pot Test Efficiency up to 87% typical Wide temperature performance at full 1 watt
NKE Series. Isolated Sub-Miniature 1W Single Output DC/DC Converters FEATURES
www.murata-ps.com NKE Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF 1 Package Style FEATURES RoHS
SPECIFICATION FOR APPROVAL REF : A PAGE: 1 ABC'S DWG NO. ABC'S ITEM NO. Peak Temp:260 max. Max time above 200 :70sec max.
REF : 20080801- PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: B C : 3.80±0.30 B : 3.80±0.30 C : 1.65±0.15 D : 1.30 typ. E : 1.20 typ. G : 1. ref. H : 4.30 ref. I : 1.60 ref. R : 1.30 ref. H D E D R I G I ( PCB
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
SMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
TYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
MILITARY SPECIFICATION SHEET
INCH-POUND MS21363B 2 July 2007 SUPERSEDING MS21363A(USAF) 2 July 1985 MILITARY SPECIFICATION SHEET COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, MAGNETICALLY SHIELDED, (FERRITE CORE-FERRITE SLEEVE),
MEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded