CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
|
|
|
- Lionel Byrd
- 5 years ago
- Views:
Transcription
1 *RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh) RoHS compliant* Applications Mobile phones Cellular phones CTV, VCR, HIC, FDD CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors General Specifications Temperature Rise...20 C max. Ambient Temperature C max. Operating Temperature CM10, CM16, CM20, CM25, CM C to +100 C CM C to +125 C Storage Temperature CM10, CM16, CM20, CM25, CM C to +100 C CM C to +125 C Resistance to Soldering Heat C, 5 seconds Materials Core Material CM10, CM16...Alumina Ceramic CM20...Polymer 10 nh to 1000 nh CM25...Polymer 10 nh to 180 nh CM32...Polymer 47 nh to 180 nh Ferrite Core CM nh to 100 µh CM nh + CM45...All Coil Type CM10, CM16...Copper plating CM20, CM25, CM32, CM45...Copper wire Enclosure CM10, CM16...Resin CM20, CM25, CM32, CM45...Epoxy resin Terminal CM10, CM16, CM20, CM25, CM32, CM45...Sn Product Dimensions CM100505, CM CM CM10: 0.2 ± 0.1 (.008 ±.004) CM16: 0.3 ± 0.15 (.012 ±.006) CM10: 0.2 ± 0.1 (.008 ±.004) CM16: 0.3 ± 0.15 (.012 ±.006) CM10: 1.0 ± 0.1 (.040 ±.004) CM16: 1.6 ± 0.15 (.063 ±.006) CM10: CM16: 0.5 ± ± 0.15 (.020 ±.004) (.032 ±.006) CM10: CM16: 0.5 ± ± 0.15 (.020 ±.004) (.032 ±.006) 1.20 (.047) 1.27 ± 0.30 (.050 ±.012) 1.27 ± 0.20 (.050 ±.008) ( ) 1.00 ± 0.10 (. 039 ±.004) DIMENSIONS ARE: MM (INCHES) CM CM CM Marking Marking Marking 2.0 (.079) 2.5 (.10) 1.2 (.047) 2.5 (.079) 3.2 (.126) 1.9 (.075) 3.2 ± 0.2 (.125 ±.008) 4.5 ± 0.3 (.177 ±.012) 1.2 (.047) 1.6 (.063) 0.4 (.016) Recommended Land Pattern Dimensions 2.2 (.086) 0.6 (.024) 3.2 ± 0.2 (.125 ±.008) 1.7 ± 0.2 (.066 ±.008) Model a b c c CM to 0.6 (.019 to.023) 1.5 to 1.7 (.059 to.067) 0.5 to 0.6 (.019 to.023) CM to 1.0 (.032 to.039) 2.0 to 2.6 (.079 to.102) 0.7 to 0.9 (.028 to.035) a CM to 1.2 (.039 to.047) 3.0 to 3.8 (.118 to.150) 0.9 to 1.3 (.028 to.051) b CM to 1.5 (.055 to.059) 3.5 to 4.0 (.138 to.157) 1.2 to 1.6 (.047 to.063) CM to 2.0 (.063 to.079) 4.0 to 4.6 (.157 to.181) 1.9 to 2.4 (.075 to.094) CM45 *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. 2.4 to 2.6 (.094 to.102) 5.5 to 6.0 (.217 to.236) 2.0 to 3.0 (.079 to.118) 1.0 (.039) 1.0 (.039)
2 CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors Packaging Specifications CM10 CM16, CM20, CM25, CM32 Paper Carrier Tape E ØDo P3 t1 E ØDo P3 F F W B W D1 DIA. B t2 Chip Component P1 P2 A Tape running direction t2 Chip Component P1 P2 A Tape running direction CM45 t1 E ØDo P3 F W B t2 Chip Component P1 P2 A Tape running direction Model A B W F E P1 P2 P3 D0 Dia. D1 Dia. t1 t2 CM (.027) 1.21 (.047) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 0.66 (.026) CM (.039) 1.80 (.071) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 0.60 (.024) 0.27 (.011) 1.20 (.047) CM (.057) 2.25 (.089) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 1.00 (.039) 0.25 (.010) 1.55 (.061) CM (.094) 2.90 (.114) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 1.10 (.043) 0.25 (.010) 1.85 (.073) CM (.110) 3.60 (.142) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 0.25 (.010) 2.40 (.094) CM (.142) 4.90 (.193) (.472) 5.50 (.217) 1.75 (.069) 8.00 (.315) 2.00 (.079) 4.00 (.157) 1.50 (.059) 0.30 (.012) 3.50 (.138) Reel Dimensions Model A B C D E W CM10 ~ CM (7.008) 60 min. 13 (.512) 21 (.827) 2 (.079) 9 (.354) CM (7.008) 60 min. 13 (.512) 21 (.827) 2 (.079) 13 (.512) E C Packaging D B Model Quantity Weight CM pcs 150 g Model Quantity Weight CM pcs 100 g CM pcs 90 g CM pcs 190 g CM pcs 90 g CM pcs 100 g A W
3 CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors Soldering Profiles CM16, CM10 Temperature ( C) <1>Maximum of 10 seconds between +255 C and +260 C 150 C seconds 220 C 190 C Ramp Up 4 C/second maximum <1> 255 C 60 seconds maximum 10 seconds minimum 260 C peak Ramp Down 5 C/second Time (Seconds) CM45, CM32, CM25, CM20 Temperature ( C) <1> 5 seconds maximum at +245 C 150 C seconds Ramp Up 4 C/second maximum <1> 245 C 170 C 183 C 60 seconds maximum 10 seconds minimum Ramp Down 5 C/second Time (Seconds)
4 Chip Inductors - CM Series Wirewound 1812 Size Part Number Inductance Std. Std. Tol. 1/2 1/2 Tol. Q Test Freq. SRF min. RDC IDC µh Tolerance Code Tolerance Code min. MHz MHz ohm max ma max CM R10<1>L 0.10 ±20 % M ±10 % K CM R12<1>L 0.12 ±20 % M ±10 % K CM R15<1>L 0.15 ±20 % M ±10 % K CM R18<1>L 0.18 ±20 % M ±10 % K CM R22<1>L 0.22 ±20 % M ±10 % K CM R27<1>L 0.27 ±20 % M ±10 % K CM R33<1>L 0.33 ±20 % M ±10 % K CM R39<1>L 0.39 ±20 % M ±10 % K CM R47<1>L 0.47 ±20 % M ±10 % K CM R56<1>L 0.56 ±20 % M ±10 % K CM R68<1>L 0.68 ±20 % M ±10 % K CM R82<1>L 0.82 ±20 % M ±10 % K CM R0<1>L 1.0 ±10 % K ±5 % J CM R2<1>L 1.2 ±10 % K ±5 % J CM R5<1>L 1.5 ±10 % K ±5 % J CM R8<1>L 1.8 ±10 % K ±5 % J CM R2<1>L 2.2 ±10 % K ±5 % J CM R7<1>L 2.7 ±10 % K ±5 % J CM R3<1>L 3.3 ±10 % K ±5 % J CM R9<1>L 3.9 ±10 % K ±5 % J CM R7<1>L 4.7 ±10 % K ±5 % J CM R6<1>L 5.6 ±10 % K ±5 % J CM R8<1>L 6.8 ±10 % K ±5 % J CM R2<1>L 8.2 ±10 % K ±5 % J CM <1>L 10 ±10 % K ±5 % J CM <1>L 12 ±10 % K ±5 % J CM <1>L 15 ±10 % K ±5 % J CM <1>L 18 ±10 % K ±5 % J CM <1>L 22 ±10 % K ±5 % J CM <1>L 27 ±10 % K ±5 % J CM <1>L 33 ±10 % K ±5 % J CM <1>L 39 ±10 % K ±5 % J CM <1>L 47 ±10 % K ±5 % J CM <1>L 56 ±10 % K ±5 % J CM <1>L 68 ±10 % K ±5 % J CM <1>L 82 ±10 % K ±5 % J CM <1>L 100 ±10 % K ±5 % J CM <1>L 120 ±10 % K ±5 % J CM <1>L 150 ±10 % K ±5 % J CM <1>L 180 ±10 % K ±5 % J CM <1>L 220 ±10 % K ±5 % J CM <1>L 270 ±10 % K ±5 % J CM <1>L 330 ±10 % K ±5 % J CM <1>L 390 ±10 % K ±5 % J CM <1>L 470 ±10 % K ±5 % J CM <1>L 560 ±10 % K ±5 % J CM <1>L 680 ±10 % K ±5 % J CM <1>L 820 ±10 % K ±5 % J CM <1>L 1000 ±10 % K ±5 % J <1> Enter tolerance code from standard or 1/2 tolerance column. Example: CM R2KL is standard tolerance; CM R2JL is 1/2 tolerance.
5 Chip Inductors - CM Series Wirewound Inductance Std. Std. Tol. 1/2 1/2 Tol. Q Test Freq. SRF min. RDC IDC 1210 Size µh Tolerance Code Tolerance Code min. MHz MHz ohm max ma max Part Number CM NML ±20 % M N/A N/A CM NML ±20 % M N/A N/A CM NML ±20 % M N/A N/A CM NML ±20 % M N/A N/A CM R10ML 0.10 ±20 % M N/A N/A CM R12ML 0.12 ±20 % M N/A N/A CM R15ML 0.15 ±20 % M N/A N/A CM R18ML 0.18 ±20 % M N/A N/A CM R22<1>L 0.22 ±20 % M ±10 % K CM R27<1>L 0.27 ±20 % M ±10 % K CM R33<1>L 0.33 ±20 % M ±10 % K CM R39<1>L 0.39 ±20 % M ±10 % K CM R47<1>L 0.47 ±20 % M ±10 % K CM R56<1>L 0.56 ±20 % M ±10 % K CM R68<1>L 0.68 ±20 % M ±10 % K CM R82<1>L 0.82 ±20 % M ±10 % K CM R0<1>L 1.0 ±10 % K ±5 % J CM R2<1>L 1.2 ±10 % K ±5 % J CM R5<1>L 1.5 ±10 % K ±5 % J CM R8<1>L 1.8 ±10 % K ±5 % J CM R2<1>L 2.2 ±10 % K ±5 % J CM R7<1>L 2.7 ±10 % K ±5 % J CM R3<1>L 3.3 ±10 % K ±5 % J CM R9<1>L 3.9 ±10 % K ±5 % J CM R7<1>L 4.7 ±10 % K ±5 % J CM R6<1>L 5.6 ±10 % K ±5 % J CM R8<1>L 6.8 ±10 % K ±5 % J CM R2<1>L 8.2 ±10 % K ±5 % J CM <1>L 10 ±10 % K ±5 % J CM <1>L 12 ±10 % K ±5 % J CM <1>L 15 ±10 % K ±5 % J CM <1>L 18 ±10 % K ±5 % J CM <1>L 22 ±10 % K ±5 % J CM <1>L 27 ±10 % K ±5 % J CM <1>L 33 ±10 % K ±5 % J CM <1>L 39 ±10 % K ±5 % J CM <1>L 47 ±10 % K ±5 % J CM <1>L 56 ±10 % K ±5 % J CM <1>L 68 ±10 % K ±5 % J CM <1>L 82 ±10 % K ±5 % J CM <1>L 100 ±10 % K ±5 % J CM <1>L 120 ±10 % K ±5 % J CM <1>L 150 ±10 % K ±5 % J CM <1>L 180 ±10 % K ±5 % J CM <1>L 220 ±10 % K ±5 % J Tighter tolerance available on request. Consult factory. NOTE: 47 nh to 180 nh air core / 220 nh to 220 uh ferrite core <1>Enter tolerance code from standard or 1/2 tolerance column. Example: CM R0KL is standard tolerance; CM R0JL is 1/2 tolerance.
6 Chip Inductors - CM Series Wirewound 1008 Size Inductance Q Test Frequency SRF min. RDC IDC Part Number µh Tolerance min. MHz MHz ohm max ma max CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM R10KL 0.10 ±10 % CM R12KL 0.12 ±10 % CM R15KL 0.15 ±10 % CM R18KL 0.18 ±10 % CM R22ML 0.22 ±20 % CM R27ML 0.27 ±20 % CM R33ML 0.33 ±20 % CM R39ML 0.39 ±20 % CM R47ML 0.47 ±20 % CM R56ML 0.56 ±20 % CM R68ML 0.68 ±20 % CM R82ML 0.82 ±20 % CM R0KL 1.0 ±10 % CM R2KL 1.2 ±10 % CM R5KL 1.5 ±10 % CM R8KL 1.8 ±10 % CM R2KL 2.2 ±10 % CM R7KL 2.7 ±10 % CM R3KL 3.3 ±10 % CM R9KL 3.9 ±10 % CM R7KL 4.7 ±10 % CM R6KL 5.6 ±10 % CM R8KL 6.8 ±10 % CM R2KL 8.2 ±10 % CM KL 10 ±10 % CM KL 12 ±10 % CM KL 15 ±10 % CM KL 18 ±10 % CM KL 22 ±10 % CM KL 27 ±10 % CM KL 33 ±10 % CM KL 39 ±10 % CM KL 47 ±10 % CM KL 56 ±10 % CM KL 68 ±10 % CM KL 82 ±10 % CM KL 100 ±10 % Tighter tolerance available on request. Consult factory. NOTE: 10 nh to 180 nh air core / 220 nh to 220 uh ferrite core
7 Chip Inductors - CM Series Wirewound 0805 Size Inductance Q Test Frequency SRF min. RDC IDC Part Number µh Tolerance min. MHz MHz ohm max ma max CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM NKL ±10 % CM R10KL 0.10 ±10 % CM R12KL 0.12 ±10 % CM R15KL 0.15 ±10 % CM R18KL 0.18 ±10 % CM R22KL 0.22 ±10 % CM R27KL 0.27 ±10 % CM R33KL 0.33 ±10 % CM R39KL 0.39 ±10 % CM R47KL 0.47 ±10 % CM R56KL 0.56 ±10 % CM R68KL 0.68 ±10 % CM R82KL 0.82 ±10 % CM R0KL 1.0 ±10 % Tighter tolerance available on request. Consult factory.
8 Chip Inductors - CM Series Laser-cut Winding 0603 Size Inductance Q Test Frequency SRF min. RDC IDC Part Number nh Tolerance min. MHz MHz ohm max ma max CM N5DL 1.5 ± 0.3 nh CM N8DL 1.8 ± 0.3 nh CM N2DL 2.2 ± 0.3 nh CM N7DL 2.7 ± 0.3 nh CM N3DL 3.3 ± 0.3 nh CM N9JL 3.9 ±5 % CM N7JL 4.7 ±5 % CM N6JL 5.6 ±5 % CM N8JL 6.8 ±5 % CM N2JL 8.2 ±5 % CM NJL 10 ±5 % CM NJL 12 ±5 % CM NJL 15 ±5 % CM NJL 18 ±5 % CM NJL 22 ±5 % CM NJL 27 ±5 % CM NJL 33 ±5 % CM NJL 39 ±5 % CM NJL 47 ±5 % CM NJL 56 ±5 % CM NJL 68 ±5 % CM NJL 82 ±5 % CM R10JL 100 ±5 % CM R12JL 120 ±5 % CM R15JL 150 ±5 % CM R18JL 180 ±5 % CM R22JL 220 ±5 %
9 Chip Inductors - CM Series Laser-cut Winding 0402 Size Inductance Q Test Frequency SRF min. RDC IDC Part Number nh Tolerance min. MHz MHz ohm max ma max CM N0DL 1.00 ±0.3 nh CM N2DL 1.20 ±0.3 nh CM N5DL 1.50 ±0.3 nh CM N8DL 1.80 ±0.3 nh CM N2DL 2.20 ±0.3 nh CM N7DL 2.70 ±0.3 nh CM N3DL 3.30 ±0.3 nh CM N9DL 3.90 ±0.3 nh CM N7DL 4.70 ±0.3 nh CM N6DL 5.60 ±0.3 nh CM N8JL 6.80 ± 5 % CM N2JL 8.20 ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM NJL ± 5 % CM R10JL ± 5 % REV. 05/11
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
Japan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
RF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
Wire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
Wire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
![74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern](/thumbs/85/91716071.jpg "74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern")
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
WLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
Power Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
Multi-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
Data sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
Multilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
RF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
INDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
FC Type 2520 (1008) Dimensions in mm (not to scale) Marking Recommended Land Pattern in mm (not to scale) ± ± ± ±0.1
3. General Use FC, F, F Features General use wire wound, resin molded chip inductor. Capable of being Re-fl ow or fl ow soldered. ide line-up from 2520 to 4532 case sizes. Good for mounting. RoHS compliant
Fixed Inductors (Chip Inductors) 2. High Frequency Use High-Q (Non Magnetic Core) QF, QE
2. High requency Use High- (Non Magnetic Core), E eatures Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut Technology. Non polarity product. High self resonance frequency. Good
SMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
FrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
Wire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
Approval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
Multi-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
Wire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
TYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
Power Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB types) Unique Ceramic Core/Laser-cut
Japan China. Recommended Applications AV equipment, Wireless communication equipment and various general electronic equipment.
4. High Power Type PF, PC, PA, PB Japan China Features Low DCR and large current, suitable for power circuit. Wire wound and resin molded chip inductor. (PC, PA, PB type) Non wound structure using unique
SMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
VLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
SLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
B Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
Iron Powder Core SMD Power Inductors
Iron powder core inductors feature a homogeneous construction, exhibiting low loss and reduced inductance drop due to applied current, allowing for higher current ratings in low profile packages. PRODUCT
WL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
Chip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
RF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13
SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 Wirewound Chip Inductor Features - Wire wound Ceramic Construction Provide High s. - Ultra-compact Inductors Provide Exceptional Values. - Low
Wirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE
SMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
YAGEO CORPORATION SMD INDUCTOR / BEADS. LCN Series. Lead-free / For RF Signals / Customer Design
YAGEO CORPORATION SMD INDUCTOR / EADS Wound Chip Inductors High Frequency LCN Series Lead-free / For RF Signals / Customer Design Due to technical expertise of accurately wounding skill,these chip inductors
INPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
SMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification
SMD Common Mode Choke - CUW Series CUW Series For USB 2.0, IEEE1394b, LVDS Applications A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide
1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S
Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased
FrelTec GmbH. Multilayer Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Multilayer Ceramic Chip Inductors SMD 10/12/2010 1/12 Freltec GmbH www.freltec.com SPECIFICATION Part Number 090 02 * 101 * J * T04 Type Size Value Tolerance
Power Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
Metal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING
Multilayer Ferrite Chip Inductor
Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment
Feature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
RADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
SRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
Multilayer Chip Inductor High Frequency LCH LCH0603. Features. Applications. Constructions and Dimensions
Multilayer Chip Inductor High Frequency Multilayer Chip Inductor High Frequency Features A ceramic material construction for high frequency application to 10GHZ Tight tolerance physical dimensions(+/-0.05mm)
WLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
After 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
Power Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
Wire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
WLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
RoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue
FEATURES Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces Highly resistant
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]
![September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]](/thumbs/91/106105501.jpg "September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]")
September 2014 Inductors for High Frequency Circuits Multilayer Ceramic MLG-Q, MLG-Pseries MLG0402P MLG0402Q MLG0603P 0402 [01005 inch]* 0402 [01005 inch] 0603 [0201 inch] * Dimensions Code JIS[EIA] (2/38)
Chip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
YAGEO CORPORATION Lead-Free & RoHs Compliance!!
Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: QUANTITY: Pcs. DATE: ITEM: PBY321611T-SERIES-N SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
![MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015](/thumbs/72/66915847.jpg "MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015")
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
AXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
FP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
Reference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
NXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]
![November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]](/thumbs/75/72156386.jpg "November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]")
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS Before using
SMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
SMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015
![MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015](/thumbs/96/128290498.jpg "MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015")
December 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG Series (For automobiles) MLG1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] Caution Nov.4, 2015 Dec.29, 2016 Jan.30, 2017 (2/12)
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]
![November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]](/thumbs/77/74658646.jpg "November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]")
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series (for automotive) MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS
Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
NTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
Impedance and Current Ranges
Features: Applications: Standard chip bead used to suppress lower frequency and lower current signals Offers impedance over a broad frequency range High current option available up to 6A Suitable for flow
WLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
Inductors for High-frequency Circuits
Inductors for High-frequency Circuits Multilayer/STD MLG series Type: MLG0603S MLG1005S MLG1608 0603[0201 inch]* 1005[0402 inch] 1608[0603 inch] * Dimensions Code JIS[EIA] Issue date: November 2011 Conformity
SELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
FIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
NXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
CRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]
![July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]](/thumbs/78/76817722.jpg "July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]")
July 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (1/23) REMINDERS FOR USING
SPECIFICATION FOR APPROVAL
PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: Marking Dot is start winding & Inductance code 101 : 5.6±0.2 B : 4.5±0.3 C : 2.3 ref. D : 5.8 ref. E : 6.0 ref. F : 1.7 ref. B C D F E ( PCB Pattern ) Ⅱ. SCHEMTIC DIGRM:
Reference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering