Power Inductors - RFB Series
|
|
|
- Kellie Hart
- 5 years ago
- Views:
Transcription
1 Document Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current carrying capabilities. The RFB0807 Series offers the lowest profile (7,5 mm) and a standard 5 mm pin spacing. The larger RFB0810 and RFB1010 Series have lower DC resistance and higher current ratings. They also have a flame retardant polyolefin wrap to protect the winding. All RFB inductors feature 500 V isolation from winding to core. Free evaluation samples are available by contacting Coilcraft or visiting RFB0807 RFB0810 RFB ,5 dia max XXX 0.43 dia max 11,0 XXX 0.45 max 11,5 MARKING 0.45 max 11,5 MARKING dia 0, ±0.02 4,0 ±0, ,8 dia ±0.02 4,0 ±0, ±0.02 5,0 ±0, ±0.02 6,0 ±0,5 Weight: g Weight: g Weight: g Terminations: Tin-silver over tin over copper over steel Packaging: 150 parts per tray Document Revised 06/23/08
2 Document Power Inductors - RFB0807 Series Part DCR max SRF typ 2 Isat 3 Irms (A) 4 number Inductance 1 (Ohms) (MHz) (A) 20 C rise 40 C rise RFB0807-2R2L 2.2 µh ±20% RFB0807-2R7L 2.7 µh ±20% RFB0807-3R3L 3.3 µh ±20% RFB0807-3R9L 3.9 µh ±20% RFB0807-4R7L 4.7 µh ±20% RFB0807-5R6L 5.6 µh ±20% RFB0807-6R8L 6.8 µh ±20% RFB0807-8R2L 8.2 µh ±20% RFB L 10 µh ±10% RFB L 12 µh ±10% RFB L 15 µh ±10% RFB L 18 µh ±10% RFB L 22 µh ±10% RFB L 27 µh ±10% RFB L 33 µh ±10% RFB L 39 µh ±10% RFB L 47 µh ±10% RFB L 56 µh ±10% RFB L 68 µh ±10% RFB L 82 µh ±10% RFB L 100 µh ±10% RFB L 120 µh ±10% RFB L 150 µh ±10% RFB L 180 µh ±10% RFB L 220 µh ±10% RFB L 270 µh ±10% RFB L 330 µh ±10% RFB L 390 µh ±10% RFB L 470 µh ±10% RFB L 560 µh ±10% RFB L 680 µh ±10% RFB L 820 µh ±10% RFB L 1.0 mh ±10% RFB L 1.2 mh ±10% RFB L 1.5 mh ±10% RFB L 1.8 mh ±10% RFB L 2.2 mh ±10% RFB L 2.7 mh ±10% RFB L 3.3 mh ±10% RFB L 3.9 mh ±10% RFB L 4.7 mh ±10% RFB L 5.6 mh ±10% RFB L 6.8 mh ±10% RFB L 8.2 mh ±10% RFB L 10 mh ±10% RFB L 12 mh ±10% RFB L 15 mh ±10% RFB L 18 mh ±10% Inductance tested at 100 khz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 2. SRF measured using Agilent/HP 4191A or equilvalent. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40 C temperature rise from 25 C ambient. 5. Ambient temperature range: 40 C to +85 C 6. Storage temperature range: Component: 40 C to +85 C Packaging: 55 C to +80 C 7. Electrical specifications at 25 C. Document Revised 06/23/08
3 Document Power Inductors - RFB0807 Series Typical L vs Frequency Typical L vs Current Document Revised 06/23/08
4 Document Power Inductors - RFB0810 Series Part Inductance 1 DCR max SRF typ 2 Isat 3 Irms (A) 4 number ±10% (Ohms) (MHz) (A) 20 C rise 40 C rise RFB L 10 µh RFB L 12 µh RFB L 15 µh RFB L 18 µh RFB L 22 µh RFB L 27 µh RFB L 33 µh RFB L 39 µh RFB L 47 µh RFB L 56 µh RFB L 68 µh RFB L 82 µh RFB L 100 µh RFB L 120 µh RFB L 150 µh RFB L 180 µh RFB L 220 µh RFB L 270 µh RFB L 330 µh RFB L 390 µh RFB L 470 µh RFB L 560 µh RFB L 680 µh RFB L 820 µh RFB L 1.0 mh RFB L 1.2 mh RFB L 1.5 mh RFB L 1.8 mh RFB L 2.2 mh RFB L 2.7 mh RFB L 3.3 mh RFB L 3.9 mh RFB L 4.7 mh RFB L 5.6 mh RFB L 6.8 mh RFB L 8.2 mh RFB L 10 mh RFB L 12 mh RFB L 15 mh RFB L 18 mh Inductance tested at 100 khz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 2. SRF measured using Agilent/HP 4191A or equilvalent. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40 C temperature rise from 25 C ambient. 5. Ambient temperature range: 40 C to +85 C 6. Storage temperature range: Component: 40 C to +85 C Packaging: 55 C to +80 C 7. Electrical specifications at 25 C. Document Revised 06/23/08
5 Document Power Inductors - RFB0810 Series Typical L vs Frequency Typical L vs Current Document Revised 06/23/08
6 Document Power Inductors - RFB1010 Series Part Inductance 1 DCR max SRF typ 2 Isat 3 Irms (A) 4 number ±10% (Ohms) (MHz) (A) 20 C rise 40 C rise RFB L 10 µh RFB L 12 µh RFB L 15 µh RFB L 18 µh RFB L 22 µh RFB L 27 µh RFB L 33 µh RFB L 39 µh RFB L 47 µh RFB L 56 µh RFB L 68 µh RFB L 82 µh RFB L 100 µh RFB L 120 µh RFB L 150 µh RFB L 180 µh RFB L 220 µh RFB L 270 µh RFB L 330 µh RFB L 390 µh RFB L 470 µh RFB L 560 µh RFB L 680 µh RFB L 820 µh RFB L 1.0 mh RFB L 1.2 mh RFB L 1.5 mh RFB L 1.8 mh RFB L 2.2 mh RFB L 2.7 mh RFB L 3.3 mh RFB L 3.9 mh RFB L 4.7 mh RFB L 5.6 mh RFB L 6.8 mh RFB L 8.2 mh RFB L 10 mh RFB L 12 mh RFB L 15 mh RFB L 18 mh Inductance tested at 100 khz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 2. SRF measured using Agilent/HP 4191A or equilvalent. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40 C temperature rise from 25 C ambient. 5. Ambient temperature range: 40 C to +85 C 6. Storage temperature range: Component: 40 C to +85 C Packaging: 55 C to +80 C 7. Electrical specifications at 25 C. Document Revised 06/23/08
7 Document Power Inductors - RFB1010 Series Typical L vs Frequency Typical L vs Current Document Revised 06/23/08
Power Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
Power Inductors. Type 3622 Series. Type 3622 Series. Electrical Characteristics A Series. Key Features
The 3622 Series is an innovative design for a high power SMD choke. It combines Tyco quality with low price and high long-term reliability. The layout and profile make it a highly appropriate component
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
![74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern](/thumbs/85/91716071.jpg "74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern")
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
Power Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS High reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified production PPAP level 3 support AEC-Q200 qualified with
SRP1238A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT Features Shielded construction Carbonyl powder core High saturation current Inductance range:.1 to 1 µh AEC-Q compliant RoHS compliant* and halogen free** SRP1A Series - Shielded
Power Inductor SMT Type
UPI F SRIS ULTRA HIGH CURRNT SMT POWR INDUCTOR. Applications:.PDA/Notebook/Desktop, and server applications..dc/dc converters in distributed power systems..dc/dc converter for Field Prograable Gate Array(FPGA).
COMPACT SHIELDED SMD POWER INDUCTOR FOR AUTOMOTIVE
FEATURES APPLICATIONS Low profile 3mm height for compact applications Advanced and high reliability wire-wound construction Shielded construction reduces EMI Automotive grade power inductor TS-16949 qualified
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Shielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
High Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
SMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
Power Inductor DIP Type
PK SERIES PEAKING COIS. Applications:.TVs and Audio equipment..telecommunication devices..personal computer..switching Power Supply..Other noise filter. Shape and Dimensions(Dimensions are in mm) : Item
2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Electrical 25 C Operating Temperature -40 C to 125 C. Application 2 Secondary Inductance Inductance Pri.
EFD Platforms - EFD, EFD0 and EFD Transformers and Inductors Power: 0W to 0W Three Different Platforms: THT and Low Profile Platforms:.mm to.mm Custom designs available Electrical Specifications @ C Operating
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 2 PRODUCT DETAIL 3-5 REEL DIMENSIONS 6 REEL PACKAGING QUANTITY 6 RELIABILITY TEST AND CONDITIONS 7 RECOMMENDED
RADIAL LEADED FIXED INDUCTORS
PK0406/0608/0707/0807/0810/1010/1012/1018/1213 TYPE Shape and size : (Dimensions are in mm) Features : Ordering information :.Low cost. PK 0608-503 K - S0 - TF.Wide range of inductance. (1) (2) (3) (4)
INPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
Coiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
Coiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
AXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
MTC K - CXX - X - E - XX
MTC Inductors - Radal type Applcaton Feld TVs and audo Telecommuncatons devce. Swtchng Power Supples. Buzzers and Alarm systems Other nose flters. Characterstcs: Inductance range : 1.0uH to 10000uH Current
The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%
SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
Vishay Dale Inductors
IM Inductors Military, MIL-C- ualified, Type LT and Commercial, Molded FETURES Wide inductance range in small package. Flame retardant coating. Precision performance, excellent reliability, sturdy construction.
P7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
Magnetics Short Form Catalog Electronics Division
Magnetics Short Form Catalog Electronics Division Eaton Electronics Product Selection Tools PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application.
Flat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
MILITARY SPECIFICATION SHEET
INCH-POUND MS21363B 2 July 2007 SUPERSEDING MS21363A(USAF) 2 July 1985 MILITARY SPECIFICATION SHEET COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, MAGNETICALLY SHIELDED, (FERRITE CORE-FERRITE SLEEVE),
FrelTec GmbH. SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:
MPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
IHLP Selection Example
VISHAY DALE www.vishay.com Magnetics IHLP-1616 APPLICATIONS IHLP-1616AB-01 IHLP-1616AB-11 0.047 0.00325 13.00 32.00 63.11 0.63 0.02 0.14 0.00028 0.10 0.00550 11.50 25.00 47.65 0.84 0.08 1.13 0.00028 0.0050
PRECISION MOTION CONTROL
PRECISION MOTION CONTROL P535 - series s The P535 series provides a combination of optimum size and price for use in instrumentation applications that require digital control of position and speed. Features
FP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
UNI-PAC Power Inductors (Surface Mount) NOW AVAILABLE WITH A PROTECTIVE CASE
UNI-PC Description Miniature surface mount design range from 0.470uH to 000uH Current range from 9. to.47 mps imum power density Ideal for applications requiring low inductance and high current in a miniature
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF-D series Type: CLF7-D (.9x7. mm) Issue date: May Conformity to RoHS Directive: This means that, in conformity with EU Directive /9/EC, lead,
Wire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
Low-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
INDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
FIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
NXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for Warn : This product series can t be used in synchronous rectification circuit that is over 24V. PRODUCT INDENTIFICATION
RF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
SLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
Catalogue For Metal Alloy Inductor
Catalogue For Metal Alloy Inductor Features A coil embedded inductor with magnetic metal alloy powder. Shielded construction. Superior DC current characteristics, suitable for large current application.
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
NXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
POWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
Surface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
inductors Inductors Power Inductors/Chokes Precision Wound Heavy Duty Toroidal Inductors 120 Volts... I2-I3 240 Volts... I3
inductors API Technologies offers a family of ruggedly manufactured toroidal inductors designed to filter out noise currents from various electrical and electronic power control circuits. They find applications
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
NXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Champs Technologies. About Us. Champs Technologies. Formation Factory Location: Taiwan (Main Plant) ISO Certification.
About Us Champs Technologies Formation 1992 Factory Location: Taiwan (Main Plant) ISO9001-2008 Certification UL File #251699 RoHS Compliant Capabilities Design & Manufacture Planar Transformers & Inductors.
NXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
AXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
SMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
SPECIFICATION FOR APPROVAL
Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xulong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED ISSUED BY CHECKED BY APPROVED
Japan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
SPECIFICATION FOR APPROVAL REF : A PAGE: 1 ABC'S DWG NO. ABC'S ITEM NO. Peak Temp:260 max. Max time above 200 :70sec max.
REF : 20080801- PGE: 1 Ⅰ. CONFIGURTION & DIMENSIONS: B C : 3.80±0.30 B : 3.80±0.30 C : 1.65±0.15 D : 1.30 typ. E : 1.20 typ. G : 1. ref. H : 4.30 ref. I : 1.60 ref. R : 1.30 ref. H D E D R I G I ( PCB
RM 6 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 220 Matching handle B63399 220 Adjusting screw B65659 220 Core B65807 212 Clamps B65808 217 Insulating
Surface Mount Shielded Power Inductors
SDRH Series ( ------SDRH Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,
SELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
Product Catalog. Berkeley Magnetics, Inc 1836 Stone Avenue San Jose, CA Phone Fax
Product Catalog Company Berkeley Magnetics Inc. was founded in 1985 and headquartered in San Jose, California to serve the electronic industry that saw rapid development of application of magnetic components.
TYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
RM 5 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 204 Matching handle B63399 204 Adjusting screw B65539 B65806 204 Core B65805 98 Clamps B65806 20 Insulating
Snubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
Multi-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
(TCRC) Power Choke Coil Inductors. Token Electronics Industry Co., Ltd. Version: July 31, Web:
Version: July 31, 2017 (TCRC) Power Choke Coil Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
MEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
MEE1 Series Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MEE1 Series FEATURES UL69 recognised Operation to zero load Single isolated output 1kVDC isolation Hi Pot Test Efficiency up to 87% typical Wide temperature performance at full 1 watt
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100807 - R12 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
1.0 Installation Wiring
1.0 Installation Wiring DX Firebox is designed to be an electronic replacement for Pontiac & Ford buzz coils when operated on DC. Installation may be positive or negative ground. Simply observe the RED
Power Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
WATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
NXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
Magnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
High Current Inductors / PIL Series
.Features: 1. Surface mount inductor with high current rating. 2. Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in hard disk, notebook
FERROXCUBE DATA SHEET. E16/8/5 E cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.87 mm 1 V e effective volume 75 mm 3 I e effective