RoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue
|
|
- Justin Blair
- 5 years ago
- Views:
Transcription
1 FEATURES Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces Highly resistant to mechanical shocks and pressure Highly reliable in environments of sudden temperature change and humidity. Super characteristics APPLICATIONS Micro Televisions, Liquid Crystal Televisions, Video Cameras, Portable VCRs, Car Radios, Car Stereos, Thin Tape Radios, Television Tuners, Mobile Telephones, Radio and Other Electronic Devices CONSTRUCTION Molding Type Open Type 1 Molded resin 3 Ferrite core 2 Electrode 4 Magnet wire (Tinned Copper Wire) 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue PART NUMBERING SYSTEM Meritek Series Dimensions (L x W) Size : J K M ±5% ±10% ±20% Packing Code T: Tape & Reel Current Blank C L Standard Large Current Low Profile Code R12 R27 2R7 100 Value 120nH 270nH 2700nH 10µH WL 0805 K T C 1R0
2 DIMENSIONS Type Size (Inch) Figure A B C D E F G H I J K Unit: mm Weight (g) (1000pcs) WL max 1.20 max 1.00 max WL max 1.71 max 1.45 max WL max 2.79 max 2.10 max WL ± ± ± ± / WL ± ± ± / WL ± ± ±0.3 4± ± WL0805(L) max 1.73 max 1.00 max WL0603(C) max 1.20 max 1.10 max WL0805(C) max 1.71 max 1.45 max WL1008(C) max 2.79 max 2.10 max WL1210(C) ± ± ± ± / WL1812(C) ± ± ± / WL2220(C) ± ± ±0.3 4± ± COLOR CODING 0603 / 0805 / 1008 Type (except WL0805(L)) Because of small sizes, these parts are marked with a single color dot. The inductance value represented by the dot is shown on the data page for each type.
3 ELECTRICAL SPECIFICATIONS (STANDARD TYPE) WL0603 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type typ. typ. Color Code 1R0 1.0 ±10, ±20% Black 1R5 1.5 ±10, ±20% Brown 1R8 1.8 ±10, ±20% Red 2R2 2.2 ±10, ±20% Orange 2R7 2.7 ±10, ±20% Yellow 3R3 3.3 ±10, ±20% Green 3R9 3.9 ±10, ±20% Blue 4R7 4.7 ±10, ±20% Violet 5R6 5.6 ±10, ±20% Gray 6R8 6.8 ±10, ±20% White 8R2 8.2 ±10, ±20% Black ±10, ±20% Brown ±10, ±20% Red ±10, ±20% Orange ±10, ±20% Yellow ±10, ±20% Green ±10, ±20% Blue ±10, ±20% Violet
4 WL0805 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type Color Code R ±10% White R ±5, ±10% Violet R ±5, ±10% Gray R ±5, ±10% Black R ±5, ±10% Brown R ±5, ±10% Red R ±5, ±10% Orange R ±5, ±10% Yellow R ±5, ±10% Green R ±5, ±10% Blue R ±5, ±10% Brown R ±5, ±10% Violet R ±5, ±10% Gray R ±5, ±10% Yellow 1R0 1.0 ±5, ±10% White 1R2 1.2 ±5, ±10% Black 1R5 1.5 ±5, ±10% Brown 1R8 1.8 ±5, ±10% Red 2R2 2.2 ±5, ±10% Orange 2R7 2.7 ±5, ±10% Yellow 3R3 3.3 ±5, ±10% Green 3R9 3.9 ±5, ±10% Blue 4R7 4.7 ±5, ±10% Violet 5R6 5.6 ±5, ±10% Gray 6R8 6.8 ±5, ±10% White 8R2 8.2 ±5, ±10% Black ±5, ±10% Brown ±5, ±10% Red ±5, ±10% Orange ±5, ±10% Yellow ±5, ±10% Green ±5, ±10% Blue ±5, ±10% Violet ±5, ±10% Gray
5 WL1008 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type Color Code R ±5, ±10% Brown Red Brown R ±5, ±10% Brown Gray Brown R ±5, ±10% Red Black Brown R ±5, ±10% Red Red Brown R ±5, ±10% Red Violet Brown R ±5, ±10% Orange Orange Brown R ±5, ±10% Orange White Brown R ±5, ±10% Yellow Violet Brown R ±5, ±10% Green Blue Brown R ±5, ±10% Blue Red Brown R ±5, ±10% Blue Gray Brown R ±5, ±10% Violet Green Brown R ±5, ±10% Gray Red Brown R ±5, ±10% White Brown Brown 1R0 1.0 ±5, ±10% Brown Black Red 1R2 1.2 ±5, ±10% Brown Red Red 1R5 1.5 ±5, ±10% Brown Green Red 1R8 1.8 ±5, ±10% Brown Gray Red 2R2 2.2 ±5, ±10% Red Red Red 2R7 2.7 ±5, ±10% Red Violet Red 3R3 3.3 ±5, ±10% Orange Orange Red 3R9 3.9 ±5, ±10% Orange White Red 4R7 4.7 ±5, ±10% Yellow Violet Red 5R6 5.6 ±5, ±10% Green Blue Red 6R8 6.8 ±5, ±10% Blue Gray Red 8R2 8.2 ±5, ±10% Gray Red Red ±5, ±10% Brown Black Orange ±5, ±10% Brown Red Orange ±5, ±10% Brown Green Orange ±5, ±10% Brown Gray Orange ±5, ±10% Red Red Orange ±5, ±10% Red Violet Orange ±5, ±10% Orange Orange Orange ±5, ±10% Orange White Orange ±5, ±10% Yellow Violet Orange ±5, ±10% Green Blue Orange ±5, ±10% Blue Gray Orange ±5, ±10% Gray Red Orange ±5, ±10% Brown Black Yellow
6 WL1210 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type (µh) R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R0 1.0 ±10% R2 1.2 ±10% R5 1.5 ±10% R8 1.8 ±10% R2 2.2 ±10% R7 2.7 ±10% R3 3.3 ±10% R9 3.9 ±10% R7 4.7 ±10% R6 5.6 ±10% R8 6.8 ±10% R2 8.2 ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10%
7 WL1812 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R ±20% R0 1.0 ±10% R2 1.2 ±10% R5 1.5 ±10% R8 1.8 ±10% R2 2.2 ±10% R7 2.7 ±10% R3 3.3 ±10% R9 3.9 ±10% R7 4.7 ±10% R6 5.6 ±10% R8 6.8 ±10% R2 8.2 ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10%
8 WL2220 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type (µh) ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10%
9 ELECTRICAL SPECIFICATIONS (LOW PROFILE TYPE) WL0805 Wound Chip Inductors (Ferrite / Open Type) / Low Profile Type 1R0 1.0 ±5, ±10% 15 L: 7.96 / : R3 3.3 ±5, ±10% R7 4.7 ±5, ±10% R8 6.8 ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ELECTRICAL SPECIFICATIONS (LARGE CURRENT TYPE) WL0603 Wound Chip Inductors (Ferrite / Open Type) / Large Current Type Color Code 47N ±10% White 51N ±10% Violet 68N ±10% Gray 72N ±10% Brown R ±10% Black R ±5, ±10% Orange R ±5, ±10% Brown R ±5, ±10% Green R ±5, ±10% Red R ±5, ±10% Green R ±5, ±10% Yellow R ±5, ±10% Orange R ±5, ±10% Blue R ±5, ±10% Black R ±5, ±10% Brown R ±5, ±10% Red R ±5, ±10% Orange R ±5, ±10% Yellow 1R0 1.0 ±5, ±10% Green 1R2 1.2 ±5, ±10% Blue 1R5 1.5 ±5, ±10% Violet 1R8 1.8 ±5, ±10% Gray 2R2 2.2 ±5, ±10% White 2R7 2.7 ±5, ±10% Black 3R3 3.3 ±5, ±10% Brown 3R9 3.9 ±5, ±10% Red 4R7 4.7 ±5, ±10% Orange 5R6 5.6 ±5, ±10% Yellow 6R8 6.8 ±5, ±10% Green 7R8 7.8 ±5, ±10% Blue 8R2 8.2 ±5, ±10% Violet ±5, ±10% Gray
10 WL0805 Wire Wound Chip Inductors (Ferrite / Open Type) / Large Current Type typ. typ. Color Code R ±10, ±20% Blue R ±10, ±20% Gray 1R ±10, ±20% Black 1R ±10, ±20% Red 1R ±10, ±20% Brown 1R ±10, ±20% Orange 2R ±10, ±20% Red 2R ±10, ±20% Yellow 3R ±10, ±20% Orange 3R ±10, ±20% Green 4R ±10, ±20% Yellow 5R ±10, ±20% Blue 6R ±10, ±20% Green 8R ±10, ±20% Violet ±5, ±10,±20% Blue ±5, ±10,±20% Gray ±5, ±10,±20% Violet ±5, ±10,±20% White ±5, ±10,±20% Gray ±5, ±10,±20% Black ±5, ±10,±20% White ±5, ±10,±20% Black ±5, ±10,±20% Yellow ±5, ±10,±20% Brown ±5, ±10,±20% Orange ±5, ±10,±20% Red
11 WL1008 Wire Wound Chip Inductors (Ferrite / Open Type) / Large Current Type Color Code typ. (Ω)max. (ma)max. 1st 2nd 3rd R ±5, ±10% Red Red Brown R ±5, ±10% Yellow Violet Brown R ±5, ±10% Blue Gray Brown R ±5, ±10% Gray Red Brown 1R0 1.0 ±5, ±10% Brown Black Red 1R2 1.2 ±5, ±10% Brown Red Red 1R5 1.5 ±5, ±10% Brown Green Red 1R8 1.8 ±5, ±10% Brown Gray Red 2R2 2.2 ±5, ±10% Red Red Red 2R7 2.7 ±5, ±10% Red Violet Red 3R3 3.3 ±5, ±10% Orange Orange Red 3R9 3.9 ±5, ±10% Orange White Red 4R7 4.7 ±5, ±10% Yellow Violet Red 5R6 5.6 ±5, ±10% Green Blue Red 6R8 6.8 ±5, ±10% Blue Gray Red 8R2 8.2 ±5, ±10% Gray Red Red ±5, ±10% Brown Black Orange ±5, ±10% Brown Red Orange ±5, ±10% Brown Green Orange ±5, ±10% Brown Gray Orange ±5, ±10% Red Red Orange ±5, ±10% Orange Orange Orange ±5, ±10% Yellow Violet Orange ±5, ±10% Brown Black Yellow ±5, ±10% Red Red Yellow ±5, ±10% Orange Orange Yellow WL1210 Wire Wound Chip Inductors (Ferrite / Molding Type) / Large Current Type 1R0 1.0 ±20% R5 1.5 ±20% R2 2.2 ±20% R3 3.3 ±20% R7 4.7 ±20% R8 6.8 ±20% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10%
12 WL1812 Wire Wound Chip Inductors (Ferrite / Molding Type) / Large Current Type 1R0 1.0 ±10% R2 1.2 ±10% R5 1.5 ±10% R8 1.8 ±10% R2 2.2 ±10% R7 2.7 ±10% R3 3.3 ±10% R9 3.9 ±10% R7 4.7 ±10% R6 5.6 ±10% R8 6.8 ±10% R2 8.2 ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10%
13 WL2220 Wire Wound Chip Inductors (Ferrite / Molding Type) / Large Current Type 1R0 1.0 ±10,±20% R2 1.2 ±10, ±20% R5 1.5 ±10, ±20% R8 1.8 ±10, ±20% R2 2.2 ±10, ±20% R7 2.7 ±10, ±20% R3 3.3 ±10, ±20% R9 3.9 ±10, ±20% R7 4.7 ±10, ±20% R6 5.6 ±10, ±20% R8 6.8 ±10, ±20% R2 8.2 ±10, ±20% ±10, ±20% ±10, ±20% ±10, ±20% ±10, ±20% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10% ±5, ±10%
14 ENVIRONMENTAL CHARACTERISTICS Electrical Performance Test Item Requirement Test Method Refer to standard electrical HP4291 or HP4284 characteristic spec. HP4291 or HP4284 HP4291 DC Resistance Agilent 34401A Rated Current Applied the current to coils, The inductance change should be less than 10% to initial value Mechanical Performance Test Item Requirement Test Method Solderability The electrodes shall be at least Lead-free inductor: after fluxing(alpha 100 or equity), inductor 90% covered with new solder coating shall be dipped in a melted solder bath at 245±5 C, 5±0.5 seconds Resistance to Soldering Appearance: No damage Pre-heating: 150 C, 1 Heat Solder Temperature: 260±5 C Immersion Time: 10±1 seconds Vibration Appearance: No damage L change: within±10% change: within±30% : within specification Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 Amplitude: 1.5 mm Time: 2 hrs for each axis (X, Y&Z), total 6 hrs Climatic Test Item Requirement Test Method Temperature Cycle One cycle: Damp Heat with Load High Temperature Storage Low Temperature Storage Appearance: No damage L change: within±10% change: within±30% : within specification Storage Temperature: 25±3 C; Humidity < 80%RH Operating Temperature Range: -40~+85 C Step Temperature ( C) Time () 1-25± ± ± ±2 3 Total: 100 cycles Measured after exposure in the room condition for 24 hrs Temperature: 40±2 C Relative Humidity: 90 ~ 95% Time: 1000 hrs Measured after exposure in the room condition for 24 hrs Temperature: 85±3 C Applied Current: Rated Current Time: 1000 hrs Measured after exposure in the room condition for 24 hrs Temperature: -25±3 C Time: 1000 hrs Measured after exposure in the room condition for 24 hrs
15 PACKAGING Packaging uantity & Reel Specifications Type ΦA ΦB ΦC W T uantity (EA) WL ±2.0 60±0.5 13±0.3 9±0.3 12± WL ±2.0 60±0.5 13±0.3 9±0.3 12± WL ±2.0 60±0.5 13±0.3 9±0.3 12± WL ±2.0 60±0.5 13±0.3 9±0.3 12± WL ±2.0 80±0.5 13± ±0.3 16± WL ± ±0.5 13± ±0.3 22± Embossed Plastic Tape Specifications Unit: mm Type A B C D E F G H J WL WL WL WL WL WL Leader / Trailer Tape Cover Tape Peel Strength The force for tearing off cover tape is 0.1~0.6(N)in the arrow direction at the following conditions: Temperature: 5~35 Humidity: 45~85% Atmospheric Pressure: 860~1060 hpa
Wire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
More informationWire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
More informationWire Wound Chip Inductor Ferrite
Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces
More informationData Sheet. Customer: Wire Wound Chip Inductor(Ferrite) NL Series
Data Sheet Customer: Product: Wire Wound Chip Inductor(Ferrite) NL Series Sizes.: 0603/0805/1008/1210/1812/2220 Issued Date: Edition: 22-Jul-16 REV.C1 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70, Guangfu
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More information1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire
Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly
More informationWire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
More informationWire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationWound Chip Inductor / NL Series
.Features: 1.Very strong solderability by reflow soldering and soldering iron or wave soldering. 2.Highly accurate dimensions can be mounted automaticlly..terminals are highly resistant to pull forces.
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationFeature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
More informationRF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13
SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 Wirewound Chip Inductor Features - Wire wound Ceramic Construction Provide High s. - Ultra-compact Inductors Provide Exceptional Values. - Low
More informationWL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
More informationMultilayer Ferrite Chip Inductor
Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment
More information(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationPrevention of electromagnetic interference to signals on the secondary side of electronic equiepmet.
Multilayer Ferrite Chip Inductors - CKFI Features 1. Monolithic structure for high reliability compact size inductor possible. 2. No cross coupling due to magnetic shield. 3. Perfect shape for mounting
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationAXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
More informationINPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
More informationJapan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
More informationYAGEO CORPORATION Lead-Free & RoHs Compliance!!
Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: QUANTITY: Pcs. DATE: ITEM: PBY321611T-SERIES-N SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationShielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationSMD Inductors Flat Top Air Core - AM Series
/ 射频电感器 Chip Beads / 贴片磁珠 Multilayer Chip Beads Inductors for High Current - MA Series ------------------------ 1 Multilayer Inductor - MB Series -------------------------------------------------------------------
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB types) Unique Ceramic Core/Laser-cut
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationSMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S
Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationSMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
More informationWLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationSMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
More informationJapan China. Recommended Applications AV equipment, Wireless communication equipment and various general electronic equipment.
4. High Power Type PF, PC, PA, PB Japan China Features Low DCR and large current, suitable for power circuit. Wire wound and resin molded chip inductor. (PC, PA, PB type) Non wound structure using unique
More informationWLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
More informationSCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
More informationDatasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationAfter 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
More informationLGA LGA TYPE COLOR CODE INDUCTORS
LGA Color code inductor toroidal coil transformer filter IFT& OSC. COIL Air&bar inductor vertical fixed inductor CATV high-defintiontv BS BStuners VCR/VTR Video movies ( ) (digital)video diskplayers Stereo
More informationMultilayer Chip Beads / CB Series
.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead and also support lead-free soldering..applications:
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationRF Type 5 (0402) 0.2± ± ± ±0.05 Standard Packing uantity 00 pcs./reel Standard Parts (E12 series) 0.5± to to
1. High Frequency Use (Non Magnetic Core) RF, RE, ND, NC, NA Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Wide line-up from 5 to 3225 case
More informationApproval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationMultilayer Chip Beads / CP TYPE(Large Current)
Multilayer Chip Beads / CP TYPE(Large Current).Features: 1.Closed magnetic circuit structure allows high density mounting while preventing crosstalk. 2.Extremely high reliability due to entirely monolithic
More informationFHW 0805 UC 068 J G T. (Unit): mm/inch. Minature size, suitable for SMT
Wire wound chip inductor is a perfect combine by means of combining hing precision coil framework with superb wound technology. Comparable with traditional inductor, it is improved technology, reduced
More informationSMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationWirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. LCN Series. Lead-free / For RF Signals / Customer Design
YAGEO CORPORATION SMD INDUCTOR / EADS Wound Chip Inductors High Frequency LCN Series Lead-free / For RF Signals / Customer Design Due to technical expertise of accurately wounding skill,these chip inductors
More informationThin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
More informationHigh Current Inductors / PIL Series
.Features: 1. Surface mount inductor with high current rating. 2. Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in hard disk, notebook
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationWIRE WOUND CHIP CERAMIC INDUCTORS FEATURES APPLICATIONS ORDERING CODE DIMENSIONS
WIRE WOUND CHIP CERAMIC INDUCTORS FEATURES ature size, suitable for SMT; Using teral electrode structure to restrain the parasitic component effect quite caused by lead; High value and Tight inductance
More informationRADIAL LEADED INDUCTORS
RADIAL LEADED INDUCTORS WAVE PARTS NUMBER *Operating Temp. : -25~+105 (Including self-generated heat) L H L 0 8 T B 1 0 1 K =Blank space 1 2 3 4 5 6 7 INDUCTORS /LEADED INDUCTORS 1Series name Code LH 2Characteristics
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationImpedance and Current Ranges
Features: Applications: Standard chip bead used to suppress lower frequency and lower current signals Offers impedance over a broad frequency range High current option available up to 6A Suitable for flow
More informationCM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors
*RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)
More informationMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications Automotive Telecommunication
More informationUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS Before using
More informationMultilayer Suppressors and Inductors. Technical Note
Multilayer Suppressors and Inductors Technical Note A Y A G E O C O M P A N Y Multilayer Suppressors and Inductors Contents Introduction 3 Multilayer Suppressors Features 4 Applications 5 Type Number structure
More informationPower Inductor DIP Type
In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the next three bands indicate
More informationNovember Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series (for automotive) MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS
More informationWLPM Series SMD Molded Power Inductors
WLPM545230 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLPM545230 Series_V3.0 June. 2015 FEATURES 1. Shielded construction. 2.
More informationReference Only. Spec No. JELF243C-0023D-01. This reference specification applies to LQP02HQ series, Chip coil (Chip Inductors).
P.1/16 CHIP COIL (CHIP INDUCTORS) LQP02HQ 02 Reference Specification 1.Scope This reference specification applies to LQP02HQ series, Chip coil (Chip Inductors). 2.ing (ex) LQ P 02 H Q 0N4 W 0 2 L Product
More informationWA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More informationPOWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
More informationVLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
More informationSPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
More informationAXIAL LEADED COATED INDUCTORS
EC TYPE COLOR CODE GUIDE In EC TYPE series color band are marked for identification. These bands indicate inductance value and tolerance. For values below 0.1uH, Gold indicates the decimal point and the
More informationMLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
More informationFIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
More information2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
More informationMLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015
December 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG Series (For automobiles) MLG1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] Caution Nov.4, 2015 Dec.29, 2016 Jan.30, 2017 (2/12)
More informationMA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
More informationSize 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
More informationWW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
More informationWR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
More informationFixed Inductors (Chip Inductors) 2. High Frequency Use High-Q (Non Magnetic Core) QF, QE
2. High requency Use High- (Non Magnetic Core), E eatures Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut Technology. Non polarity product. High self resonance frequency. Good
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: SBF K HTS 0001 /4 Date: 2017. 1. 10 Specification Style: CHIP FUSE; RECTANGULAR TYPE SBF32[Optional code:as] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationWR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402
WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page
More information