Impedance and Current Ranges

Size: px
Start display at page:

Download "Impedance and Current Ranges"

Transcription

1 Features: Applications: Standard chip bead used to suppress lower frequency and lower current signals Offers impedance over a broad frequency range High current option available up to 6A Suitable for flow and reflow soldering Multiple sizes available RoHS compliant, lead-free and halogen-free Contact Stackpole for additional inductance values Computers and peripheral equipment VCRS, televisions Cellular phones Digital counication equipment Various electronic equipment Circuit where a stable ground is unavailable Impedance and Current Ranges Part Number General Purpose Impedance (Ω) Rated Current (ma) FB02YTYN FB03YTYN FB05YTYN FB04YTYN FB06YTYN FB10YTYN FB08YTYN FB12YTYN Part Number High Current Impedance (Ω) Rated Current (ma) FB02YTYH FB03YTYH FB05YTYH FB04YTYH FB10YTYH FB08YTYH FB12YTYH High Speed Part Number Impedance (Ω) Rated Current (ma) FB02YTQS FB03YTQS FB05YTQS FB04YTQS Mechanical Specifications Type/Code Weight (g) (1000 pc) FB A B ± ± ± ~ inches 1.00 ± ± ± ~ 0.35 C D Unit Rev Date: 08/27/

2 Type/Code FB03 FB05 FB04 FB06 FB10 FB08 FB12 Weight (g) (1000 pc) A Mechanical Specifications (cont.) B C D ± ± ± ~ inches 1.60 ± ± ± ~ ± ± ± ~ inches 2.00 ± ± ± ~ ± ± ± ~ inches 3.20 ± ± ± ~ ± ± ± ~ inches 3.20 ± ± ± ~ ± ± ± ~ inches 3.20 ± ± ± ~ ± ± ± ~ inches 4.50 ± ± ± ~ ± ± ± ~ inches 4.50 ± ± ± ~ 1.00 Unit FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB02YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % Rev Date: 08/27/

3 FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % FB03YTYN % Rev Date: 08/27/

4 FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % 100 0;3 300 FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % FB05YTYN % Rev Date: 08/27/

5 FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB04YTYN % FB06YTYN % FB06YTYN % FB06YTYN % FB10YTYN % FB10YTYN % FB10YTYN % FB10YTYN % Rev Date: 08/27/

6 Rev Date: 08/27/ FB08YTYN % FB08YTYN % FB08YTYN % FB08YTYN % FB08YTYN % FB08YTYN % FB08YTYN % FB08YTYN % FB12YTYN % FB12YTYN % FB02YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH %

7 FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB03YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % Rev Date: 08/27/

8 FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % FB05YTYH % zzzzzzzzz FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % FB04YTYH % Rev Date: 08/27/

9 FB10YTYH % FB10YTYH % FB10YTYH % FB10YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB08YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % FB12YTYH % Electrical Specifications High Speed FB02YTQS % FB02YTQS % FB02YTQS % FB02YTQS % FB02YTQS % FB02YTQS % FB02YTQS % Rev Date: 08/27/

10 Electrical Specifications High Speed FB02YTQS % FB02YTQS % FB02YTQS % FB02YTQS % Electrical Specifications High Speed FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % FB03YTQS % Rev Date: 08/27/

11 Electrical Specifications High Speed FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % FB05YTQS % Electrical Specifications High Speed FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % Rev Date: 08/27/

12 Electrical Specifications High Speed FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % FB04YTQS % Soldering Conditions: Environmental Specifications - General Item Specification Test Method Impedance HP4291B Refer to specific Electrical Specification DCR Agilent 34401A Rev Date: 08/27/

13 Mechanical Performance Tests Item Specification Test Condition / Test Method Test device shall be soldered on the substrate Substrate dimension: 100x40x1.6 Deflection: 2 Keeping time: 30 seconds For 0402, substrate dimension is 100x40x0.8 Flexure Strength The forces applied on the right conditions must not damage the terminal electrode and the ferrite Vibration Resistance to Soldering Heat Solderability Terminal Strength Test Appearance: No damage More than 75% of the terminal electrode should be covered with solder. Impedance: within ± 30% of initial value The electrodes shall be at least 90% covered with new solder coating 02 series: 0.2Kg 03 series: 0.5Kg 05 series: 1Kg other series: 0.2Kg Test device shall be soldered on the substrate Oscillation frequency: 10 to 55 to 10Hz for 1 minute Amplitude: 1.5 Time: 2 hours for each axis (X,Y&Z). Total of 6 hours Pre-heating: 150 C, 1 minute Solder temperature: 260±5 C Iersion time: 10±1 seconds Pre-heating: 150 C, 1 minute Solder temperature: 245±5 C Iersion time: 4±1 seconds Test device shall be soldered on the substrate Temperature Cycle Humidity Resistance High Temperature Resistance Low Temperature Resistance Operating temperature: -55 C ~ 125 C Storage temperature: 25 ± 3 C. Humidity < 80% RH Appearance: No damage Impedance: within ±30% of initial value One cycle: Step 1: -55 ± 3 C for 30 minutes Step 2: 25 ± 2 C for 3 minutes Step 3: 125 ± 3 C for 30 minutes Step 4: 25 ± 2 C for 3 minutes Total: 100 cycles Measured after exposure in the room condition for 24 hours Temperature 40 ± 2 C Relative Humidity: 90~95% Time: 1000 hours Measured after exposure in the room condition for 24 hours Temperature 125 ± 3 C Relative Humidity: 0% Applied Current: Rated Current Time 1000 hours Measured after exposure in the room condition for 24 hours Temperature: -55 ± 3 C Relative Humidity: 0 Time: 1000 hours Measured after exposure in the room condition for 24 hours Rev Date: 08/27/

14 Packaging Specifications Type/Code A B C D D1 D2 E F Unit FB02 FB03 FB05 FB04 FB10 FB08 FB ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Inches Inches Inches Inches Inches Inches Inches ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Paper Tape Specifications Type/Code FB02 FB03 FB05 Type/Code FB02 FB03 FB05 A B C E F Unit ± ± ± ± ± Inches 0.65 ± ± ± ± ± ± ± ± ± ± Inches 1.10 ± ± ± ± ± ± ± ± ± ± Inches 1.58 ± ± ± ± ± 0.05 G P W T Unit ± ± ± ± Inches 2.00 ± ± ± ± ± ± ± ± Inches 2.00 ± ± ± ± ± ± ± ± Inches 2.00 ± ± ± ± 0.05 Rev Date: 08/27/

15 Embossed Plastic Tape Specifications Type/Code FB04 FB06 FB10 FB08 FB12 Type/Code FB04 FB06 FB10 FB08 FB12 A B C E F Unit ± ± ± ± ± Inches 1.88 ± ± ± ± ± ± ± ± ± ± Inches 1.88 ± ± ± ± ± ± ± ± ± ± Inches 2.77 ± ± ± ± ± ± ± ± ± ± Inches 1.88 ± ± ± ± ± ± ± ± ± ± Inches 3.66 ± ± ± ± ± 0.05 G P W J K Unit ± ± ± ± ± Inches 2.00 ± ± ± ± ± ± ± ± ± ± Inches 2.00 ± ± ± ± ± ± ± ± ± ± Inches 2.00 ± ± ± ± ± ± ± ± ± ± Inches 2.00 ± ± ± ± ± ± ± ± ± ± Inches 2.00 ± ± ± ± ± 0.05 Recoended Pad Layouts Type/Code A B C Unit FB02 FB03 FB05 FB04 FB ~ ~ ~ ~ ~ inches inches inches inches inches ~ ~ ~ ~ ~ Rev Date: 08/27/

16 RoHS Compliance Recoended Pad Layouts (cont.) Type/Code A B C Unit FB10 FB08 FB ~ ~ ~ inches inches inches ~ ~ ~ Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union s directive regarding Restrictions on Hazardous Substances (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. RoHS Compliance Status Standard Product Series Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) FB SMD YES 100% Matte Sn Always Always Conflict Metals Coitment We at are joined with our industry in opposing the use of metals mined in the conflict region of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to REACH We certify that all passive components supplied by are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, The Registration, Evaluation, Authorization and Restriction of Chemicals, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are coitted to the prevention of all forms of pollution. Rev Date: 08/27/

17 How to Order F B 0 5 Y T Y N Product Series Size Packaging Material Current Type Impedance Code Description Code Code Tol Code Description Code Quantity Code Type Code Type Code Description 02 Y 25% 02 10,000 ui : 200 N General Ohm FB Ferrite Bead 03 Paper Tape 03 Y (for General and High H High Current Ohm 4, Current Types) S High Speed Ohm ,000 ui : Kohm T 10 Plastic 06 Q (for High Speed Type 2, Embossed 10 Only) 12 Tape 08 2, ,000 Rev Date: 08/27/

AV / AVY Series Automotive SMD Varistor

AV / AVY Series Automotive SMD Varistor Description: Almost all electronic systems in internal-combustion powered vehicles, e.g., anti-lock brakes, direct ignition, airbag control, wiper motors, etc. are susceptible to damage from destructive

More information

Electrical Specifications 5mm. Ic (A) (V)

Electrical Specifications 5mm. Ic (A) (V) Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range

More information

YAGEO CORPORATION Lead-Free & RoHs Compliance!!

YAGEO CORPORATION Lead-Free & RoHs Compliance!! Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: QUANTITY: Pcs. DATE: ITEM: PBY321611T-SERIES-N SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER

More information

Chip Inductor. Power Inductor

Chip Inductor. Power Inductor Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire

More information

Wire Wound Chip Inductors Ferrite SMD

Wire Wound Chip Inductors Ferrite SMD GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER

More information

Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812

Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate

More information

FrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD

FrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc

More information

Multilayer Ferrite Chip Inductor

Multilayer Ferrite Chip Inductor Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment

More information

Wire Wound Chip Inductor (Ferrite)

Wire Wound Chip Inductor (Ferrite) FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant

More information

Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.

Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip

More information

Chip Inductor. Power Inductor

Chip Inductor. Power Inductor Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer

More information

Prevention of electromagnetic interference to signals on the secondary side of electronic equiepmet.

Prevention of electromagnetic interference to signals on the secondary side of electronic equiepmet. Multilayer Ferrite Chip Inductors - CKFI Features 1. Monolithic structure for high reliability compact size inductor possible. 2. No cross coupling due to magnetic shield. 3. Perfect shape for mounting

More information

Multilayer Chip Beads / CP TYPE(Large Current)

Multilayer Chip Beads / CP TYPE(Large Current) Multilayer Chip Beads / CP TYPE(Large Current).Features: 1.Closed magnetic circuit structure allows high density mounting while preventing crosstalk. 2.Extremely high reliability due to entirely monolithic

More information

SKYMOS MULTILAYER CHIP BEAD FEATURES APPLICATIONS ORDERING CODE

SKYMOS MULTILAYER CHIP BEAD FEATURES APPLICATIONS ORDERING CODE FEATURES Multilayer Chip Bead: These small size chips generating high impedance. Either flow or reflow soldering methods can be use due to electroplating of the terminal electrodes. High reliability due

More information

WLCW1608 SMD Wire Wound Ceramic Chip Inductors

WLCW1608 SMD Wire Wound Ceramic Chip Inductors WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with

More information

Wire Wound Chip Inductor

Wire Wound Chip Inductor FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up

More information

Data sheet SMD Wire Wound Chip Inductor WL Series

Data sheet SMD Wire Wound Chip Inductor WL Series Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high

More information

Multilayer Chip Beads / CB Series

Multilayer Chip Beads / CB Series .Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead and also support lead-free soldering..applications:

More information

Wire Wound Chip Inductor Ferrite

Wire Wound Chip Inductor Ferrite Applications: Features: Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces

More information

PROTECTION AND CONNECTION. Product environmental information Cable distribution cabinet, Kabeldon CDC

PROTECTION AND CONNECTION. Product environmental information Cable distribution cabinet, Kabeldon CDC PROTECTION AND CONNECTION Product environmental information Cable distribution cabinet, Kabeldon CDC Applicability This document covers the environmental information for the following products: Applicability

More information

SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S

SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased

More information

RoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue

RoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue FEATURES Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces Highly resistant

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a

More information

Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:

Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh

More information

1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire

1 Moulded resin 2 Electrode (Ag) 3 Ferrite core 4 Magnet wire Features: Very strong solderability by flow soldering, soldering iron or wave soldering. Highly accurate dimensions, can be mounted automatically. Terminals are highly resistant to pull forces. Highly

More information

Wire Wound Chip Inductor (Ferrite)-NL Series

Wire Wound Chip Inductor (Ferrite)-NL Series Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,

More information

B Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance

B Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics

More information

WLFI1608 Ferrite Chip Inductors

WLFI1608 Ferrite Chip Inductors WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor

More information

SMD Wire Wound Chip Inductor

SMD Wire Wound Chip Inductor GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors

More information

Features. Samples. I max (A) P d. typ. (W)

Features. Samples. I max (A) P d. typ. (W) 0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.) 1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications

Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com

More information

WLFI2012 Ferrite Chip Inductors

WLFI2012 Ferrite Chip Inductors WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor

More information

Wire Wound Chip Inductor-WB Series

Wire Wound Chip Inductor-WB Series Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors

More information

Metal Alloy Low-Resistance Resistor Specifications

Metal Alloy Low-Resistance Resistor Specifications Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following

More information

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics *RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed

More information

SCDS Series. Shielded SMD Power Inductors. Features

SCDS Series. Shielded SMD Power Inductors. Features YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,

More information

Wire Wound Chip Inductor (Ferrite)-NL Series

Wire Wound Chip Inductor (Ferrite)-NL Series Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2

More information

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

WL Series Wire Wound Chip Inductor

WL Series Wire Wound Chip Inductor Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly

More information

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A) 1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors

CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors *RoHS COMPLIANT 220K Features High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide inductance range (1.0 nh to 1000 µh)

More information

INPAQ. Specification. MCB & MHC W Series. Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516

INPAQ. Specification. MCB & MHC W Series. Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB & MHC W Series Specification Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 RoHS Pb Chip Ferrite Bead for Automotive Engineering Spec. Qualified

More information

Multi-Layer Power Inductors (IP_L Series)

Multi-Layer Power Inductors (IP_L Series) Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x

More information

SinglFuse SF-1206HIxxxM Series Features

SinglFuse SF-1206HIxxxM Series Features E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen

More information

Shielded SMD Power Inductor

Shielded SMD Power Inductor PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for

More information

Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18

Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18 Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition

More information

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description 2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

Thin Film Anti-Sulfurated Chip Resistor (TAS Series)

Thin Film Anti-Sulfurated Chip Resistor (TAS Series) (TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur

More information

SMD Power Inductor-VLH

SMD Power Inductor-VLH SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges

More information

Positive Temperature Coefficient (PTC) Data Sheet

Positive Temperature Coefficient (PTC) Data Sheet Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable

More information

Features. V max (Vdc) I max (A) typ. (W) P d

Features. V max (Vdc) I max (A) typ. (W) P d 2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12

Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12 Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com

More information

Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *

Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 * P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N

More information

RF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13

RF Inductor. SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 of 13 SMD Wirewound Inductors Chip Open-Type - WL Series / 绕线贴片电感 Wirewound Chip Inductor Features - Wire wound Ceramic Construction Provide High s. - Ultra-compact Inductors Provide Exceptional Values. - Low

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at

More information

0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M

0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M *RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250

More information

Wound Chip Inductor / NL Series

Wound Chip Inductor / NL Series .Features: 1.Very strong solderability by reflow soldering and soldering iron or wave soldering. 2.Highly accurate dimensions can be mounted automaticlly..terminals are highly resistant to pull forces.

More information

INPAQ Global RF/Component Solutions

INPAQ Global RF/Component Solutions HCM 1012 G Series Specification Product Name Series Chip Filter HCM G Series Low Profile Type Size EIAJ 1012 HCM1012G SERIES LOW PROFILE TYPE (Chip Filter) Engineering Specification Features and Application.Powerful

More information

Feature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner

Feature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip

More information

SF-0603SP150M SF-0603SP200M SF-0603SP250M

SF-0603SP150M SF-0603SP200M SF-0603SP250M E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer

More information

NTC Thermistors, 2-Point Radial Leaded, Automotive Grade

NTC Thermistors, 2-Point Radial Leaded, Automotive Grade NTC Thermistors, 2-Point Radial Leaded, Automotive Grade FEATURES High accuracy over a wide temperature range High stability over a long life Exceptional thermal shock withstanding performance AEC-Q200

More information

POLY-FUSE Resettable PTCs Surface Mount > 1206L Series

POLY-FUSE Resettable PTCs Surface Mount > 1206L Series Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±

More information

ZV/ZVY Series Low Voltage SMD Varistors

ZV/ZVY Series Low Voltage SMD Varistors Description: The ZV Series of low voltage varistors is designed to protect sensitive electronics devices against high voltage surges in the low voltage region. They offer excellent transient energy absorption

More information

No. Test Requirement Test Condition Test Reference. 10 cycles

No. Test Requirement Test Condition Test Reference. 10 cycles *RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and

More information

Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.

Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ. END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional

More information

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration

More information

CC06H High I 2 t Chip 0603 size fuses

CC06H High I 2 t Chip 0603 size fuses Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth

More information

SolidMatrix 1206 Fast Acting Surface Mount Fuses

SolidMatrix 1206 Fast Acting Surface Mount Fuses SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing

More information

FrelTec GmbH. SMD Power Inductors

FrelTec GmbH. SMD Power Inductors GmbH Mathildenstr. 10A 82319 Starnberg Germany 10/12/2011 1/13 GmbH www.freltec.com SPECIFICATION Part Number 107 252010 * G * 100 * M E02 * Type Size Use Value Packing 107 : SMD Power Inductor 252010:

More information

SMD High Power Precision Resistors

SMD High Power Precision Resistors Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code

More information

INPAQ Global RF/Component Solutions

INPAQ Global RF/Component Solutions WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile

More information

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics

More information

Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance

Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance .220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature

More information

Automotive Grade Thin Film Chip Resistors

Automotive Grade Thin Film Chip Resistors FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55

More information

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

POLYFUSE Resettable PTCs Surface Mount > 2920L Series Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released

More information

Thin Film Chip Resistor (ARG Series)

Thin Film Chip Resistor (ARG Series) Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement

More information

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance *RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring

More information

Shielded SMD Power Inductor

Shielded SMD Power Inductor PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat

More information

Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF

Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel

More information

Multi-Layer Power Inductors (IP Series)

Multi-Layer Power Inductors (IP Series) Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.

More information

Power Inductors (IP Series)

Power Inductors (IP Series) Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &

More information

Trimmable Thick Film Flat Chip Resistors

Trimmable Thick Film Flat Chip Resistors Trimmable Thick Film Flat Chip Resistors FEATURES Designed for state of the art laser trimming Enables economical functional circuit adjustment Low TCR available Excellent stability ± 0.25 % (1000 h rated

More information

SMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification

SMD Common Mode Choke - CUW Series. CUW Series For USB 2.0, IEEE1394b, LVDS Applications. Product Identification SMD Common Mode Choke - CUW Series CUW Series For USB 2.0, IEEE1394b, LVDS Applications A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide

More information

1/4" Square Single-Turn Cermet Sealed Trimmer

1/4 Square Single-Turn Cermet Sealed Trimmer /4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning

More information

CRS-A Series High Power Anti-Surge Resistor

CRS-A Series High Power Anti-Surge Resistor *RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*

More information

Data Sheet. Customer: Wire Wound Chip Inductor(Ferrite) NL Series

Data Sheet. Customer: Wire Wound Chip Inductor(Ferrite) NL Series Data Sheet Customer: Product: Wire Wound Chip Inductor(Ferrite) NL Series Sizes.: 0603/0805/1008/1210/1812/2220 Issued Date: Edition: 22-Jul-16 REV.C1 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70, Guangfu

More information

GAS DISCHARGE TUBES (GDTS)

GAS DISCHARGE TUBES (GDTS) GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data

More information

Molded Chip Wirewound Inductors

Molded Chip Wirewound Inductors FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC

More information

Multilayer Chip Inductor-CL Series

Multilayer Chip Inductor-CL Series Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction

More information

June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM

June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM-0902094710 Application: GSM 900 Duplexer ISSUED CHECKED CHECKED

More information

NTC Thermistor for Automotive: TSM-C Series

NTC Thermistor for Automotive: TSM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant

More information