Automotive Grade Thin Film Chip Resistors

Transcription

1 FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55 C ~ +155 C OPTIONAL HIGH POWER RATING (0603 ~ 2010 CASE SIZES) REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Automotive Grade Resistors RoHS Compliant includes all homogeneous materials *See Part Number System for Details STANDARD POWER RATING Type EIA Size NTRA NTRA NTRA NTRA NTRA NTRA NTRA Power Rating at 70 C 1/16W (0.063W) 1/16W (0.063W) 1/10W (0.10W) 1/8W (0.125W) 1/4W (0.25W) 1/4W (0.25W) 1/2W (0.50W) Max.*1 Working 25V 50V 100V Max.*2 Overload 50V 100V Tolerance (Code) Temperature Coefficient (ppm/ C) Range (Ω) 49.9 ~ 10KΩ ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) 49.9 ~ 100KΩ 10 ~ 49.9KΩ ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) 10 ~ 332KΩ 10 ~ 100KΩ 10 ~ 200KΩ Values E-24, E-96 & E-192 HIGH POWER RATING Type EIA Size NTRA06H 0603 NTRA10H 0805 NTRA12H 1206 NTRA20H 1210 NTRA25H 2010 Power Rating at 70 C 1/10W (0.10W) 1/8W (0.125W) 1/4W (0.25W) 1/3W (0.33W) 1/3W (0.33W) Max.*1 Working 75V Max.*2 Overload 400V 400V 400V Tolerance (Code) Temperature Coefficient (ppm/ C) Range (Ω) 10 ~ 49.9KΩ ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) 10 ~ 332KΩ 10 ~ 100KΩ 10 ~ 200KΩ Values E-24, E-96 & E-192 Note *1 - Maximum allowable continuous Working for all resistors is the lower of the two values: Maximum Working as specified above or Power rating (Watts) x (Ohms) Note *2 - Maximum Overload for all resistors is the lower of the two values: "Maximum Overload as specified above or 2.5 x Power rating (Watts) x (Ohms) 1

2 TYPICAL NOISE CHARACTERISTICS Value (Ω) Case Size ~ 9-95dB -95dB -95dB 10 ~ 49-85dB -85dB -85dB 50 ~ 99-85dB -85dB -85dB 100 ~ 4.99K -100dB -100dB -105dB 5K ~ 19.9K -100dB -100dB -100dB 20K ~ 1M -90dB -100dB -100dB Percentage of Power Rating Power Derating Curve: For operation above 70 C, power rating must be derated according to the following chart: Temperature C ENVIRONMENTAL CHARACTERISTICS Item Teminal Strength < 0.05% Specification None Broken > 0.05% Test Method AEC-Q200 Force of 1.8kg for 60 seconds Moisture R ±0.05% R ±0.2% MIL-STD-202 Method 106 Mechanical Shock R ±0.25% R ±0.5% Vibration R ±0.25% R ±0.5% ESD R ±0.1% Flame Retardance to solvents Temperature Coefficient of No Flame Marking unsmeared As specified As specified MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. MIL-STD-202 Method g's for 20 minutes, 12 cycles each in 3 orientations, 10 ~ 2,000Hz AEC-Q Human body, 2KV AEC -Q Temperature sensing at 500 C, vltage power subjected to 32VDC, current clamped up to 500ADC and decreased in 1.0VDC/hour MIL-STD-202 Method 215 Add aquesous wash chemical - OKEM Clean or equivalent. Do not use banned solvents JIS-C , IEC /-55/+25/+125/+25 Short Time Overload R ±0.05% R ±0.2% JIS-C , IEC RCWV x 2.5 or Max Overloading for 5 Seconds R ±0.2% for High Power Insulation Load Life Biased Humidity >1000MΩ R ±0.05% R ±0.2% >7KΩ R ±0.5% R ±0.5% for High Power R ±0.05% R ±0.2% >7KΩ R ±0.5% R ±0.5% for High Power JIS-C , IEC Apply 100Vdc for 1 minute JIS-C , IEC RCWV +70 C, 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,000 hours MIL-STD-202F Method 103 Total time 1,000, 85 C, 85%RH at 10% operating power 2

3 Item < 0.05% Specification to Dry Heat R ±0.05% > 0.05% Temperature Cycling R ±0.05% R ±0.2% Bending Strength R ±0.05% R ±0.2% Test Method MIL-STD-202 Method C, 1000 hours JESD22, Method JA C to +125 C, 1,000 cycles JIS-C , IEC Bending Amplitude 3mm for 10 seconds Solderability 95% Minimum Coverage JIS-C , IEC C ±5 C, 3 seconds to Soldering Heat R ±0.05% R ±0.2% Thermal Shock R ±0.05% R ±0.25% JIS-C , IEC C ±5 C for 10 seconds JIS-C , IEC C ~ +125 C, 300 cycles Maximum transfer time - 20 sec., dwell time - 15 min. (Air to Air) MULTIPLIER CODE STANDARD E-24, E-96 AND E-192 VALUES AND 0603 RESISTANCE CODES E-24 E-96 Value Value Code Value Code Value Code Value Code * Special E192 resistance values are supported on all case sizes of NTRA series. Please review your E192 value requirements with NIC, as special terms apply, and E192 values are supplied without component resistance value marking. Code A B, b C D, d E F G H X Y Z Multiplier E-192* Value Value Value Value Value Value

4 PART MARKING 1. No marking on 0402 case size. 2. Marking for 0603 case size: E-24 values and E-96 values: ± 1% (F), ± 0.5% (D), ± 0.25% (C). ± 0.1% (B) tolerances E-192 values: ± 0.1% (B) tolerance (No Marking) CODING FORMULA XX X Example: 10.2kΩ = 102 x 10 2 Ω = 02C 02 C Multiplier Code 33.2 Ω = 332 x 10-1 = 51X Code 51 X 3. Marking for 0805, 1206, 2010 and 2512 case sizes: E-24 and E-96 values - ±1%(F), ±0.5% (D), ±0.25%(C), ±0.1% (B) tolerances E-192 values: ±0.1% (B) tolerance (No Marking) MARKING EXAMPLES 10Ω = 01X 7.5k Ω = 85B 150k Ω = 18D 1 MegΩ = 01E 4 DIGIT MARKING SYSTEM - First 3 digits are the significant figures, the 4th digit is the mulitplier. "R"= decimal point. Examples: 0R10 = 0.10 ohms, 1R00 = 1.0 ohms, 22R1=22.1 ohms, 3320= 332 ohms, 4751=4.75K ohms, 1132=11.3K ohms, 6493=649K ohms PART NUMBER SYSTEM NTRA 10 H B 1003 C TR 1K Q Y F RoHS compliant AEC-Q200 Qualified Optional 1,000 piece reel quantity Tape & Reel Packaging Temperature Coefficient Code: C = ±25ppm, D = ±50ppm Code: First 3 digits are significant figures (both E-24 and E-96 values), 4th digit is the multiplier, R indicates a decimal point. Tolerance Code: B = ± 0.1%, C = ± 0.25%, D = ± 0.5%, F = ± 1% H = Optional High Power Rating Size Code: 04=0402, 06=0603, 10=0805, 12=1206, 20=1210, 25=2010, 50=2512 Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS certified production site 4

5 DIMENSIONS (mm) Type EIA Size L W H T t NTRA ± ± ± ± ± 0.10 NTRA ± ± ± ± ± 0.20 NTRA ± ± ± ± ± 0.25 NTRA ± ± ± ± ± 0.25 NTRA ± ± ± ± ± 0.25 NTRA ± ± ± ± ± 0.25 NTRA ± ± ± ± ± 0.25 TAPING SPECIFICATIONS (1) Availability Type EIA Size Carrier Tape Qty per Reel (pcs) Fig. Material Width (mm) Standard Optional NTRA A 10,000 1,000 NTRA A NTRA A Paper 9.5 ± 1.0 NTRA A 5,000 1,000 NTRA A NTRA B NTRA B Plastic 13.5 ± ,000 1,000 (2) PAPER TAPE DIMENSIONS (mm) FIG. A Type EIA Size A B D E F P 0 W T NTRA ± ± ± ± 0.03 NTRA ± ± ± NTRA ± ± 0.05 ± 0.05 ± 0.10 ± 0.05 ± ± 0.10 ± 0.05 ± 0.1 NTRA ± ± ± 0.05 NTRA ± ± 0.05 FIG. A P 0 E Cover tape D F W B T A 5

6 (3) PLASTIC EMBOSSED TAPE DIMENSIONS (mm) FIG. B Type EIA Size A B D E F P 0 W T NTRA ± ±0.10 NTRA ± ± ± ± ± ± ± ± ± ±0.20 FIG. B P 0 E Cover tape D F W B T A (0402 ~ 1206) 16.4 ± 1.0 (2010 ~ 2512) w ± ± ±2 180 ±3 13 ±0.5 W (0402 ~ 1206) 14 ± 0.5 (2010 ~ 2512) LAND PATTERN DIMENSIONS (mm) Type EIA Size A B C NTRA ± 0.2 NTRA ± 0.2 NTRA ± 0.2 NTRA ± 0.2 NTRA ± 0.2 NTRA ± 0.2 NTRA ± PEAK REFLOW SOLDERING CONDITIONS 260 C 10 Sec. 1 ~ 5 C/Sec. 1 ~ 5 C/Sec. C ~ 9 C/Sec. 120 Sec. B A 0 6