MANUFACTURING OF STEERING COMPONENTS FOR A RACE CAR
|
|
- Natalie Dorsey
- 5 years ago
- Views:
Transcription
1 International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 6, June 2017, pp , Article ID: IJMET_08_06_022 Available online at aeme.com/ijmet/issues.asp?jtype=ijmet&vtyp pe=8&itype=6 ISSN Print: and ISSN Online: IAEME Publication Scopus Indexed MANUFACTURING OF STEERING COMPONENTS FOR A RACE CAR Subramanyam B, P. Bridjesh and Madhu S Department of Mechanical Engineering, MLR Institute of Technology, Hyderabad, India ABSTRACT Automotive vehicles require a range of steering activity; one extreme is highway driving with negligible turning. Another is steering during U-turn maneuvers, which calls for agile turning and a small turning radius to increase vehicle stability. To manufacture of steering components of a Race Car this paper presenting how to manufacture the components based on the design and analysis of steering components for a Race Car. By using various production techniques like; Gear cutting, Broaching, Heat treatment, Milling, Turning, Tig Welding and Grinding operations the manufacturing of steering components for a race car has to be done. Key words: Broaching, Gear cutting, Pinion, Rack and Steering Arm. Cite this Article: Subramanyam B, P. Bridjesh and Madhu S. Manufacturing of Steering Components for a Race Car. International Journal of Mechanical Engineering and Technology, 8(6), 2017, pp MET/issues.asp?JType=IJMET&VType=8&ITy ype=6 1. INTRODUCTION Based on the mathematical and numerical analysis performed in the previous study the manufacturing of steering components of a race car has to be done. In this manufacturing process various manufacturing methods like; Gear cutting, Broaching, Heat treatment, Milling, Turning, Tig Welding and grinding operations/methods to be performed. The gear ratio reduces the torque required. This force, thus torque, may still be substantial and so it is common for theree to be a reduction gear immediately before this by either a gear or worm gear reduction. Rack gears have a higher ratio, thus require a greater driving torque, than screw actuators.en27 steel materials are used for the selection of material. 2. MANUFACTURING METHODS OF STEERING COMPONENTS FOR A RACE CAR By using broaching, gear cutting, heat treatment, milling, turning, TIG welding Methods the components are manufactured with the material of EN27 and EN28 steel editor@iaeme.com
2 Manufacturing of Steering Components for a Race Car Broaching The rack and pinion of steering system is manufactured by using broaching operation as shown in fig.1 and fig.2. Heat Treatment The most common application is metallurgical. Heat treatment techniques are annealing, case hardening, precipitation strengthening, tempering, normalizing and quenching. Milling The milling process removes material by performing many separate, small cuts. This is accomplished by using a cutter with many teeth, spinning the cutter at high speed, or advancing the material through the cutter slowly; most often it is some combination of these three approaches. The speeds and feeds used are varied to suit a combination of variables. The speed at which the piece advances through the cutter is called feed rate, or just feed; it is most often measured in length of material per full revolution of the cutter. By using the CNC milling the manufacture the steering arm has carried out as shown in fig.3. Turning The turning processes are carried out on a lathe, considered to be the oldest machine tools, and can be of four different types such as straight turning, taper turning, profiling or external grooving. Those types of turning processes can produce various shapes of materials such as straight, conical, curved, or grooved work piece. In general, turning uses simple single-point cutting tools. Steering shaft will be manufactured by using turning operation on lathe machine as shown in fig.4. Splines Splines are made on steering shaft to attach steering wheel. TIG Welding The TIG welding of steering component are shown in fig.5. Grinding It is an abrasive machining process that uses a grinding wheel as the cutting tool. Grinding practice is a large and diverse area of manufacturing and tool making. 3. ASSEMBLY OF STEERING COMPONENTS The assembly of all the components has to be done with proper alignments. The manufacturing methods of steering components are familiar to this assembly of steering components. Assembly of steering components is shown in fig.6 and fig editor@iaeme.com
3 Subramanyam B, P. Bridjesh and Madhu S 4. FIGURES Figure 1 Manufacturing of Rack by using Broaching operation Figure 2 Manufacturing of Pinion by using Broaching operation Figure 3 Manufacturing of Steering arm by using Milling operation Figure 4 Manufacturing of Steering shaft by using Turning operation editor@iaeme.com
4 Manufacturing of Steering Components for a Race Car Figure 5 Manufacturing of Steering component by using TIG Welding Figure 6 Steering wheel to housing assembly Figure 7 Housing to steering arm assembly 5. CONCLUSIONS The manufacturing methods are succeeded to the assembly of all the manufacturing components for the steering components of a race car. The numerical and simulated values of the pre study and analysis of all the components are satisfied and withstander the manufacturing requirements editor@iaeme.com
5 Subramanyam B, P. Bridjesh and Madhu S REFERENCES [1] Rushikesh D. Savant, S. Y. Gajjal, V. G. Patil, Review on Disc Brake Squeal, International Journal of Engineering Trends and Technology (IJETT) Volume 9 Number 12 - Mar 2014 [2] Subramanyam. B, P.Bridjesh, Design and Analysis of Student Formula Car Roll Cage, Indian Journal of Science and Technology, Volume (48). DOI: /ijst/2016/v9i48/105996, December [3] Rushikesh D. Savan, Shekhar Y. Gajjal, Finite Element Modelling and Analysis of Brake Squeal, International Journal of Research and Scientific Innovation, Volume I Issue VIII. [4] Robertson, Dennis, and George J. Delagrammatikas. The suspension system of the 2009 cooper union FSAE vehicle: A comprehensive design review. No SAE Technical Paper, [5] V. B. Bhandari Design of Machine Elements McGraw Hill Education India Pvt. Ltd., vol. 3, 11th Edition, 20. [6] Dhiraj Malu, Nikhil Katare, Suraj Runwal, Saurabh Ladhe, Design Methodology for Steering System of an ATV. International Journal of Mechanical Engineering and Technology, 7(5), 2016, pp [7] Mandar Soman, Sumit Sonekar, Saurabh Upadhye and Prof. Pathan Farha Mubeen. Designing and Manufacturing of Foot Operated Steering For Disabled People, International Journal of Mechanical Engineering and Technology, 6(12), 2015, pp editor@iaeme.com
MODELLING AND STRUCTURAL ANALYSIS OF A GO-KART VEHICLE CHASSIS FRAME
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 6, June 2017, pp. 305 311, Article ID: IJMET_08_06_031 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtyp
More informationDESIGN AND ANALYSIS OF STEERING COMPONENTS FOR A RACE CAR
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 6, June 2017, pp. 125 129, Article ID: IJMET_08_06_013 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtyp
More informationDESIGN METHODOLOGY FOR STEERING SYSTEM OF AN ATV
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 5, September October 2016, pp.272 277, Article ID: IJMET_07_05_027 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=5
More informationDESIGN AND MANUFACTURING ELECTRICAL CAR JACK D.C. 12 VOLT
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 6, June 207, pp. 200 206, Article ID: IJMET_08_06_02 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtyp
More informationDesign Methodology of Steering System for All-Terrain Vehicles
Design Methodology of Steering System for All-Terrain Vehicles Dr. V.K. Saini*, Prof. Sunil Kumar Amit Kumar Shakya #1, Harshit Mishra #2 *Head of Dep t of Mechanical Engineering, IMS Engineering College,
More informationDOUBLE WISHBONE SUSPENSION SYSTEM
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 5, May 2017, pp. 249 264 Article ID: IJMET_08_05_027 Available online at http:// http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=5
More informationMULTI-USE FLOOR CLEANING MACHINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 5, May 2017, pp. 656 664, Article ID: IJMET_08_05_072 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=5
More informationSTRESS AND THERMAL ANALYSIS OF CLUTCH PLATE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 3, March 2018, pp. 611 618, Article ID: IJMET_09_03_063 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=3
More informationINCREASE IN FATIGUE LIFE OF SPUR GEAR BY INTRODUCING CIRCULAR STRESS RELIEVING FEATURE
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6359(Online), Volume TECHNOLOGY 6, Issue 5,
More informationA STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 599 603, Article ID: IJMET_09_11_059 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=11
More informationSTATIC ANALYSIS ON BEVEL GEAR USING STRUCTURAL STEEL, GRAY CAST IRON, AND STAINLESS STEEL
STATIC ANALYSIS ON BEVEL GEAR USING STRUCTURAL STEEL, GRAY CAST IRON, AND STAINLESS STEEL Prateek Srivastava 1, Rishabh 2, Zubair Irshad 3, Pankaj Kumar Singh 4 Graduate Students Mechanical Engineering,
More informationSTRUCTURAL ANALYSIS OF SPUR GEAR USING FEM
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 6, November December 2016, pp.01 08, Article ID: IJMET_07_06_001 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=6
More informationFinite element analysis of profile modified spur gear
Finite element analysis of profile modified spur gear Sagar Gaur Mechanical Engineering Department, Institute of Technology, YashluvVirwani Mechanical Engineering Department, Institute of Technology, Rudresh
More informationA STUDY ON THE PROPELLER SHAFT OF CAR USING CARBON COMPOSITE FIBER FOR LIGHT WEIGHT
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 5, May 2018, pp. 603 611, Article ID: IJMET_09_05_066 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=5
More informationBRAKING SYSTEM DESIGN FOR ALL TERRIAN VEHICLE (ATV)
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 4, April 2018, pp. 983 990, Article ID: IJMET_09_04_112 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=4
More informationISSN: [Patil et al., 5(10): October, 2016] Impact Factor: 4.116
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY DESIGN AND ANALYSIS OF TELESCOPIC HALFSHAFT FOR AN ALL-TERRAIN VEHICLE (ATV) Chirag Patil *, Sandeep Imale, Kiran Hiware, Sumeet
More informationDESIGN AND ANALYSIS OF DIFFERENTIAL GEAR BOX IN AUTOMOBILES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 5, May 2017, pp. 175 185 Article ID: IJMET_08_05_019 Available online at http:// http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=5
More informationANALYSIS OF STRESSES AND DEFLECTIONS IN SPUR GEAR
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 4, April 2017, pp. 461 473 Article ID: IJMET_08_04_050 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=4
More informationIJESRT. Scientific Journal Impact Factor: (ISRA), Impact Factor: METHODOLOGY Design Parameter [250]
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY DESIGN AND ANALYSIS OF COMPOSITE LEAF SPRING FOR LIGHT COMMERCIAL VEHICLE (TATA ACE) Miss. Gulshad Karim Pathan*, Prof. R.K.Kawade,
More informationDesign and Analysis of Restricted Air Intake for Performance Optimization of Single-Cylinder Engine
RESEARCH ARTICLE OPEN ACCESS Design and Analysis of Restricted Air Intake for Performance Optimization of Single-Cylinder Engine Darshit Jangid 1, Akshay Sharma 2, Vaibhav Dhama 3 1(Mechanical Engineering,
More informationChandra Prasad B S, Sunil S and Suresha V Asst. Professor, Dept of Mechanical Engineering, SVCE, Bengaluru
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 7, July 2018, pp. 997 1004, Article ID: IJMET_09_07_106 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=7
More informationDESIGN AND ANALYSIS OF HARMONIC ANALYSIS OF THREE WHEELER AUTO CHASSIS USING ANSYS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 12, December 218, pp. 195 111, Article ID: IJMET_9_12_11 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=12
More informationStress and Design Analysis of Triple Reduction Gearbox Casing
IJIRST International Journal for Innovative Research in Science & Technology Volume 2 Issue 02 July 2015 ISSN (online): 2349-6010 Stress and Design Analysis of Triple Reduction Gearbox Casing Mitesh Patel
More informationEXPERIMENTAL INVETIGATIONN ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DI- CI ENGINE FUELED WITH PREHEATED SHEA OLEIN BIODIESEL
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 2006 2014, Article ID: IJMET_09_11 211 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=
More informationALCOHOL DETECTION AND VEHICLE IGNITION LOCKING SYSTEM
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 9, September 2018, pp. 1078 1084, Article ID: IJMET_09_09_117 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=9
More informationDESIGN AND ANALYSIS OF COMPOSITE LEAF SPRING
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 5, September October 2016, pp.177 183, Article ID: IJMET_07_05_019 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=5
More informationDesign & Manufacturing of an Effective Steering System for a Formula Student Car
Design & Manufacturing of an Effective Steering System for a Formula Student Car Nikhil N. Gitay 1, Siddharth A. Joshi 2, Ajit A. Dumbre 3, Devesh C. Juvekar 4 1,2,3,4 Student, Department of Mechanical
More informationA GEAR COUPLING WITH TAPERED EXCESS LOAD ABSORPTION
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 12, December 2018, pp. 928 942, Article ID: IJMET_09_12_093 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=
More informationGEAR NOISE REDUCTION BY NEW APPROACHES IN GEAR FINISHING PROCESSES
GEAR NOISE REDUCTION BY NEW APPROACHES IN GEAR FINISHING PROCESSES Nikam Akshay 1, Patil Shubham 2, Pathak Mayur 3, Pattewar Vitthal 4, Rawanpalle Mangesh 5 1,2,3,4,5 Department of Mechanical Engineering,
More informationDesign & Development of Regenerative Braking System at Rear Axle
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 8, Number 2 (2018), pp. 165-172 Research India Publications http://www.ripublication.com Design & Development of Regenerative
More informationGEAR GENERATION GEAR FORMING. Vipin K. Sharma
GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.
More informationDesign and Analysis of Multi-Link Structure For Rear Independent Suspension of Heavy Vehicle
Design and Analysis of Multi-Link Structure For Rear Independent Suspension of Heavy Vehicle L C Ravi M.Tech Student Aurora s Scientific Technological and Research Academy JNTU, Hyderabad, Telangana, India.
More informationFAULT ANALYSIS FOR VOLTAGE SOURCE INVERTER DRIVEN INDUCTION MOTOR DRIVE
International Journal of Electrical Engineering & Technology (IJEET) Volume 8, Issue 1, January- February 2017, pp. 01 08, Article ID: IJEET_08_01_001 Available online at http://www.iaeme.com/ijeet/issues.asp?jtype=ijeet&vtype=8&itype=1
More informationSalakhov R.R Salakhov Rishat Rizovich, Candidate of Technical Sciences, Director, Research Institute of Energy Efficient Technologies, KNRTU-KAI
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 3, March 2017, pp. 467 475, Article ID: IJMET_08_03_051 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=3
More informationINTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY
INTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY A PATH FOR HORIZING YOUR INNOVATIVE WORK DESIGN, ANALYSIS AND OPTIMIZATION OF PISTON OF 180CC ENGINE USING CAE TOOLS NIKHIL
More informationRE-EQUIPPING OF GEAR HOBBING MACHINE: NUMERICAL CONTROL INNOVATION BASED ON PLC AND SERVOMECHANISM
RE-EQUIPPING OF GEAR HOBBING MACHINE: NUMERICAL CONTROL INNOVATION BASED ON PLC AND SERVOMECHANISM 1 OMKAR KADAM, 2 BALIRAM JADHAV, 3 SHRIKANT PAWAR 1 M.Tech, Production Engineering, Mechanical Engineering
More informationISSN: [Raghunandan* et al., 5(11): November, 2016] Impact Factor: 4.116
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY DESIGN AND ANALYSIS OF GO-KART CHASSIS D.Raghunandan*, A.Pandiyan, Shajin Majeed * Mechanical Department, Final year, Saveetha
More informationDESIGN AND MANUFACTURING OF 2-STAGE SPEED REDUCER FOR A BAJA ALL TERRAIN VEHICLE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 10, October 2017, pp. 42 52, Article ID: IJMET_08_10_006 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=10
More informationMODELING, FABRICATION AND ANAYSIS OF FOUR WHEEL STEERING SYSTEM TO QUADRICYCLE NAMED SPINNER
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 666 675, Article ID: IJMET_09_13_069 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationDESIGN AND DEVELOPMENT OF IC ENGINE GO-KART
DESIGN AND DEVELOPMENT OF IC ENGINE GO-KART AkshayB. Khot 1, KunalJ. Mahekar 2, VaibhavJ. Mahekar 3, GurunathS. Patil 4, MohanishM. Patil 5, Prof. S. P. Jarag 6 BE Student, Department of Mechanical Engineering,
More informationCustomised Speed Reduction for SB CNC 60N Lathe
ISSN (Online) : 2319-8753 ISSN (Print) : 2347-6710 International Journal of Innovative Research in Science, Engineering and Technology An ISO 3297: 2007 Certified Organization Volume 6, Special Issue 4,
More informationHydraulic Spring Stiffness Testing Machine
Hydraulic Spring Stiffness Testing Machine Nagre N.P. 1, Bhosale M.S. 2, Prof. Patil S.C 3 1 Nagre N.P, Mechanical Engineering Department, SSIEMS Parbhani, ni3nagre1@gmail.com 2 Bhosale M. S, Mechanical
More informationDESIGN AND DEVELOPMENT OF INTEGRATED PNEUMATIC CAR JACK
DESIGN AND DEVELOPMENT OF INTEGRATED PNEUMATIC CAR JACK Kaushal H. Pandya 1, Amit V. Sawant 2, Vinayak S. Gurav 3, Assistant Prof. S S Gurav 4 1,2,3,4 Mechanical Department, Nanasaheb Mahadik college of
More informationGEARBOX DESIGN FOR CNC LATHE
GEARBOX DESIGN FOR CNC LATHE Prof. Reji Mathew 1, Linto P Anto 2, Adith Shajan 3, Basil P Thomas 4, Elisa Manoj 5, Kuriakose M Renji 6 1Professor, Department of Mechanical Engineering, Mar Athanasius College
More informationRemote Controlled Sand and Gravel Sorter Machine: A Prototype
Alenogines L. San Diego et al. 2016, Volume 4 Issue 5 ISSN (Online): 2348-4098 ISSN (Print): 2395-4752 International Journal of Science, Engineering and Technology An Open Access Journal Remote Controlled
More informationCONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 6, June 2015, pp. 132-138, Article ID: IJMET_06_06_013 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=6
More informationComparative study between double wish-bone and macpherson suspension system
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Comparative study between double wish-bone and macpherson suspension system To cite this article: Shoaib Khan et al 2017 IOP Conf.
More informationDUAL MODE ELECTRIC STARTER
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 1, January 2018, pp. 786 791, Article ID: IJMET_09_01_086 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=1
More informationKinematic Analysis of the Slider-Crank Mechanism in Automated Vibration Sausage Feeder
5 th World Conference on Applied Sciences, Engineering & Technology 0-04 June 016, HCMUT, Vietnam Kinematic Analysis of the Slider-Crank Mechanism in Automated Vibration Sausage Feeder NGUYễN HồNG NGÂN
More informationCOMPARATIVE STUDIES ON PERFORMANCE PARAMETERS OF TWO STROKE SPARK IGNITION ENGINE WITH COPPER COATED PISTON WITH METHANOL BLENDED GASOLINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 5, Issue 12, Dec 2014, pp. 139-145, Article ID: 30120140512014 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=5&itype=12
More informationDEVELOPMENT OF A LAP-TIME SIMULATOR FOR A FSAE RACE CAR USING MULTI-BODY DYNAMIC SIMULATION APPROACH
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 7, July 2018, pp. 409 421, Article ID: IJMET_09_07_045 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=7
More informationDesign and analysis of flat joint connection of double wishbone suspension A arm
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 13, Issue 4 Ver. II (Jul. - Aug. 2016), PP 114-121 www.iosrjournals.org Design and analysis of flat
More informationOptimization of Seat Displacement and Settling Time of Quarter Car Model Vehicle Dynamic System Subjected to Speed Bump
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Optimization
More informationEVALUATION OF THE PERFORMANCE OF TRAFFIC SIGNS FOR VEHICLE SPEED LIMITS IN MERAUKE DISTRICT
International Journal of Civil Engineering and Technology (IJCIET) Volume 9, Issue 8, August 2018, pp. 568 573, Article ID: IJCIET_09_08_055 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=9&itype=8
More informationCaster Wheel Endurance Testing Rig
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 13, Issue 3 Ver. VII (May- Jun. 2016), PP 29-35 www.iosrjournals.org Caster Wheel Endurance Testing
More informationDESIGN AND MANUFACTURING CAMSHAFT USING ON HYBRID VEHICLES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue, June 8, pp. 77 8, Article ID: IJMET_9 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=
More informationPERFORMANCE TEST ON 4-STROKE PETROL ENGINE WITH PURE OXYGEN. UG Students, Guru Nanak Institute of Technology, Hyderabad, India ABSTRACT
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 7, Issue 3, Jun 2017, 113-120 TJPRC Pvt. Ltd. PERFORMANCE TEST
More informationInternational Journal of Advance Engineering and Research Development
Scientific Journal of Impact Factor (SJIF): 5.71 International Journal of Advance Engineering and Research Development Volume 5, Issue 07, July -2018 e-issn (O): 2348-4470 p-issn (P): 2348-6406 INTEGRATION
More informationSTUDY ON VEHICLE PULL CHARACTERISTICS ACCORDING TO TIRE TREAD PATTERN
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 5, May 2018, pp. 891 896, Article ID: IJMET_09_05_098 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=5
More informationFEM Analysis of Combined Paired Effect on Piston & Connecting Rod using ANSYS
FEM Analysis of Combined Paired Effect on Piston & Connecting Rod using ANSYS Kunal Saurabh Assistant Professor, Mechanical Department IEC Group of Institutions, Greater Noida - India kunalsaurabh.me@ieccollege.com
More informationAnalysis Of Gearbox Casing Using FEA
Analysis Of Gearbox Casing Using FEA Neeta T. Chavan, Student, M.E. Design, Mechanical Department, Pillai Hoc, Maharashtra, India Assistant Prof. Gunchita Kaur-Wadhwa, Mechanical Department Pillai Hoc,
More informationWITH BIO LUBRICANTS JATROPHA OIL, CASTOR OIL, NEEM OIL AND MINERAL OIL (SAE 20W50)
and COMPARATIVE Mineral Oil (SAE 20W50), Anand STUDY Kalani OF and Rita FULL Jani, Journal JOURNAL Impact Factor BEARING (2015): 8.8293 WITH BIO LUBRICANTS JATROPHA OIL, CASTOR OIL, NEEM OIL AND MINERAL
More informationEXPERIMENTAL INVESTIGATION OF EMISSION CONTROL USING AG CATALYTIC CONVERTER IN A FOUR STOKE DIESEL ENGINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 192 202, Article ID: IJMET_09_13_020 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationDESIGN AND ANALYSIS OF AN EPICYCLIC GEAR TRAIN USING CORRECTED GEARS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 8, August 2017, pp. 1477 1484, Article ID: IJMET_08_08_153 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=8
More informationDesign and optimization of steering system
Design and optimization of steering system #1 Makandar Sadikali M, #2 Prof. M.K.Wasekar #1 Student, MechanicalDepartment, Savitribai Phule Pune University, SAE Kondhwa, pune, India. #2 Dept. of MechanicalDepartment,
More informationDelux Bearings Limited. Inspiring EVERY Movement
Delux Bearings Limited Inspiring EVERY Movement Clutch Release Bearings King Pin Bearings Steering Bearings Delux Bearings Ltd Leading supplier for Clutch release Bearings, King Pin Bearings, Thrust &
More informationSEAT " YEOLA, NASHIK , Maharashtra, India 2 Student, Mechanical Department, SND COLLAGE OF ENGINEERING & RESEARCH CENTER
" A SPRING FEA ANALYSIS FOR TRACTOR SEAT " Kayastha Pratik Nandlal 1, Katkade Shekhar Prakash 2, Sadgir Rameshwar Nivruti 3, A.H.Karwande 4 1 Student, Mechanical Department, SND COLLAGE OF ENGINEERING
More informationFACULTY PROFILE. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7
More informationDesign and optimization of Double wishbone suspension system for ATVs
Design and optimization of Double wishbone suspension system for ATVs Shantanu Garud 1, Pritam Nagare 2, Rohit Kusalkar 3, Vijaysingh Gadhave 4, Ajinkya Sawant 5 1,2,3,4Dept of Mechanical Engineering,
More informationDESIGN, ANALYSIS AND FABRICATION OF BRAKING SYSTEM WITH REAR INBOARD BRAKES IN BAJA ATV
DESIGN, ANALYSIS AND FABRICATION OF BRAKING SYSTEM WITH REAR INBOARD BRAKES IN BAJA ATV Aman Sharma 1, Prakhar Amrute 2, Suryakant Singh Thakur 3, Jatin Shrivastav 4 1,2,3,4Department of Mechanical Engineering,
More informationDesign and Analysis of a Space Frame Tubular Chassis for a Formula Student car
Design and Analysis of a Space Frame Tubular Chassis for a Formula Student car Apoorva Tyagi Graduate Student, Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal,
More informationDevelopment of Compact Chassis Dynamometer System for Two Wheeler Vehicle
ISSN 2395-1621 Development of Compact Chassis Dynamometer System for Two Wheeler Vehicle #1 K.A. Tapre, #2 K.M.Narkar 1 krunal.tapre@gmail.com 2 knarkar@gmail.com #12 Department of Mechanical Engineering,
More informationEXHAUST GAS HEAT UTILIZATION IN IC ENGINES USING PRE-HEATER
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 8, August 2017, pp. 1321 1326, Article ID: IJMET_08_08_134 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=8
More informationDriven axle with dual final drive ratio
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2016 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Srinivasan
More informationDevelopment of Carbon Fibre Suspension Linkages for Formula Sae Vehicles
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 14, Issue 4 Ver. V (Jul. - Aug. 2017), PP 38-44 www.iosrjournals.org Development of Carbon Fibre
More informationModal analysis of Truck Chassis Frame IJSER
Modal analysis of Truck Chassis Frame 158 Shubham Bhise 1, Vaibhav Dabhade 1, Sujit Pagi 1, Apurvi Veldandi 1. 1 B.E. Student, Dept. of Automobile Engineering, Saraswati College of Engineering, Navi Mumbai,
More informationA Geometrical Modular Design for Handling of LPG Cylinders using Nested Kinematic Robotic Gripper
Indian Journal of Science and Technology, Vol 9(48), DOI: 10.17485/ijst/2016/v9i48/108474, December 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 A Geometrical Modular Design for Handling of
More informationDESIGN & OPTIMIZATION OF EXHAUST MUFFLER & DESIGN VALIDATION
DESIGN & OPTIMIZATION OF EXHAUST MUFFLER & DESIGN VALIDATION 1 RAHUL D. NAZIRKAR, 2 S.R.MESHRAM, 3 AMOL D. NAMDAS, 4 SURAJ U. NAVAGIRE, 5 SUMIT S. DEVARSHI 1,2,3,4,5 Department of Mechanical Engineering,
More informationKINEMATICS OF REAR SUSPENSION SYSTEM FOR A BAJA ALL-TERRAIN VEHICLE.
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 8, August 2017, pp. 164 171, Article ID: IJMET_08_08_019 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=8
More informationDesign, Construction and Testing of an Electric Powered Toggle Jack Mechanism
Design, Construction and Testing of an Electric Powered Toggle Jack Mechanism Ipilakyaa T.D. 1, Achirgbenda V.T. 2, Gbashi S. 3 1Department of Mechanical Engineering, University of Agriculture Makurdi,
More informationCFD Analysis and Comparison of Fluid Flow Through A Single Hole And Multi Hole Orifice Plate
CFD Analysis and Comparison of Fluid Flow Through A Single Hole And Multi Hole Orifice Plate Malatesh Barki. 1, Ganesha T. 2, Dr. M. C. Math³ 1, 2, 3, Department of Thermal Power Engineering 1, 2, 3 VTU
More informationRedesign of Drive Shaft`s tripod Assembly, to improve the performance & reduce failure
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 2 Ver. IV (Mar- Apr. 2014), PP 81-87 Redesign of Drive Shaft`s tripod Assembly, to improve
More informationDESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS
DESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS Akshay S 1, Ashik Vincent 2, Athul Anand R 3, George Kurian 4, Dr. Shajan Kuriakose 5 1,2,3,4 B-Tech Degree
More informationA COMPARATIVE STUDY AND ANALYSIS OF THE PERFORMANCE OF VARIOUS REGENERATIVE BRAKING SYSTEMS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 3, March 2017, pp. 66 76 Article ID: IJMET_08_03_008 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=3
More informationDesign and Analysis of Radial Flux Permanent Magnet Brushless DC Motor for Gearless Elevators
International Journal of Control Theory and Applications ISSN : 0974-5572 International Science Press Volume 9 Number 43 2016 Design and Analysis of Radial Flux Permanent Magnet Brushless DC Motor for
More informationLUREN PRECISION
LUREN PRECISION www.luren.com.tw Contents 1 3 5 7 9 11 12 13 Our Philosophy To Become Taiwan s Technology Leader About Luren The Leading Precision Gear Manufacturer Three Business Cores Gear Cutting Tools
More informationAnalysis of Turn Table Assembly of Semi- Automatic High Pressure Molding Machine
Kalpa Publications in Engineering Volume 1, 2017, Pages 259 264 ICRISET2017. International Conference on Research and Innovations in Science, Engineering &Technology. Selected Papers in Engineering Analysis
More informationA STUDY ON JACK-UP GEARBOX DESIGN FOR DRILLSHIPS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 6, June 2018, pp. 948 959, Article ID: IJMET_09_06_107 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=6
More informationSurface Coating on Engine Valve
Surface Coating on Engine Valve V.Gowrishankar 1, A.Gurusamy 2, D.Samuelraj 3, G.Gowtham 4 Rane Engine Valve Ltd., Chennai, India 1,2 Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science & Technology,
More informationCompelete analysis of chasis design of automobile vehicle using finite element method
Volume: 04 Issue: 3 Mar -2017 www.irjet.net p-issn: 2395-0072 Compelete analysis of chasis design of automobile vehicle using finite element method 1 Vidyadhar biswal, 2 Rohit goyal, 3 Mandeep chhabra,
More informationSOLAR FLAT PLATE COLLECTOR HEAT TRANSFER ANALYSIS IN THE RAISER WITH HELICAL FINS Mohammed Mohsin Shkhair* 1, Dr.
ISSN 2277-2685 IJESR/May 2015/ Vol-5/Issue-5/352-356 Mohammed Mohsin Shkhair et. al./ International Journal of Engineering & Science Research SOLAR FLAT PLATE COLLECTOR HEAT TRANSFER ANALYSIS IN THE RAISER
More informationA Comprehensive Study on Speed Control of DC Motor with Field and Armature Control R.Soundara Rajan Dy. General Manager, Bharat Dynamics Limited
RESEARCH ARTICLE OPEN ACCESS A Comprehensive Study on Speed Control of DC Motor with Field and Armature Control R.Soundara Rajan Dy. General Manager, Bharat Dynamics Limited Abstract: The aim of this paper
More informationEXPERIMENTAL INVESTIGATIONS ON 4- STROKE SINGLE CYLINDER DIESEL ENGINE (C.I) WITH CHANGING GEOMETRY OF PISTON
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 218, pp. 693 7, Article ID: IJMET_9_13_72 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationStatic Structural and Thermal Analysis of Aluminum Alloy Piston For Design Optimization Using FEA Kashyap Vyas 1 Milan Pandya 2
IJSRD - International Journal for Scientific Research & Development Vol. 2, Issue 03, 2014 ISSN (online): 2321-0613 Static Structural and Thermal Analysis of Aluminum Alloy Piston For Design Optimization
More informationDUDLEY'S" HANDBOOK OF PRACTICAL GEAR DESIGN AND MANUFACTURE. Stephen P. Radzevich
Second Edition DUDLEY'S" HANDBOOK OF PRACTICAL GEAR DESIGN AND MANUFACTURE Stephen P. Radzevich LßP) CRC Press VV J Taylors Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor
More informationDesign & Fabrication of Reverse Gear Box Design & Fabrication of Reverse Gear Box for Go-Kart & For Handicapped Vehicle
Design & Fabrication of Reverse Gear Box Design & Fabrication of Reverse Gear Box for Go-Kart & For Handicapped Vehicle Ahmed Ansari 1, Ravi Shanker Kumar 2, Purnend Shukla 3, Jayesh Bane 4, Wasim Khan
More informationIJSER. Sivanesh Prabhu.M, Arulvel.S,Mayakkannan.S. 1. Introduction 2. THEORETICAL CALCULATION
International Journal of Scientific & Engineering Research Volume 8, Issue 8, August-017 1431 ISSN 9-5518 CFD Analysis of Automobile Rear Dynamic Spoiler 1. Introduction Sivanesh Prabhu.M, Arulvel.S,Mayakkannan.S
More informationEFFECTIVEE DESIGN AND ANALYSIS OF PEDELEC E-BIKE USING MBD APPROACH
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 568 577, Article ID: IJMET_09_13_0599 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=
More informationDESIGN AND ANALYSIS OF PUSH ROD ROCKER ARM SUSPENSION USING MONO SPRING
Volume 114 No. 9 2017, 465-475 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu ijpam.eu DESIGN AND ANALYSIS OF PUSH ROD ROCKER ARM SUSPENSION USING MONO SPRING
More informationSTUDY ON MAXIMUM POWER EXTRACTION CONTROL FOR PMSG BASED WIND ENERGY CONVERSION SYSTEM
STUDY ON MAXIMUM POWER EXTRACTION CONTROL FOR PMSG BASED WIND ENERGY CONVERSION SYSTEM Ms. Dipali A. Umak 1, Ms. Trupti S. Thakare 2, Prof. R. K. Kirpane 3 1 Student (BE), Dept. of EE, DES s COET, Maharashtra,
More information