FLANGES FLANGES.
|
|
- Gabriel O’Brien’
- 5 years ago
- Views:
Transcription
1 FANGES FANGES 26
2 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200, 400, K500, 600, 625, 800, 800, 800, 825, alloy 20, alloy28, hastelloy C22, C276 Other Grades Cu70Ni30(C71500, B30), Cu90Ni10(C70600, B10) itanium & itanium Alloy Carbon Steel A105, A105N ow emperature Steel A350 F2, F3 Alloy Steel A182 F5, F9, F11, F12, F22, F91, F911, FR igh Yield A694 F42, F46, F50, F52, F56, F60, F65, F70 1.Equivalent grade from EN/DIN is available for above. 2.he list above is for your reference only. he actual enquiry will consider order quantity and delivery time. 3.If didn t find your material here, you are kindly requested to make a specific enquiry to sales@kaysuns.com. ASME/ANSI B and B Dimension olerances on Dimensions (ASME/ANSI B16.5 and B16.7, and MSS SP-44) Range in olerance General and s(for blind flange dimendions see page 8-23 for B16.5, page8-46 for B16.47 Series A/ MSS SP-44 and page 8-51 for B16.47 Series B/ API 605): G(raised face diameter) NPS 24 ±0.03 ±0.76 NPS 26,with 0.06 in raised face ±0.08 ±2.03 NPS 26,with 0.25 in raised face ±0.04 ±1.02 I(bolt hole diameter) All No tolerance in B16.5 or B J(bolt circle diameter) All ±0.06 ±1.52 Center to center of adjacent bolt holes All ±0.03 ±0.76 Eccenticity of bolt circle and machined facing diameters NPS 2½ ±0.03 ±0.76 NPS 3 ±0.06 ±1.52 s1 (For dimensions see page 8-10 for B 16.5, page 8-46 for B16.47 Series A/ MSS SP-44 and page 8-51 for B16.47 Series B/ API 605): D(overall length) NPS NPS 5 to , ,-3.05 NPS 12 to , ,-4.57 NPS 26 ±0.19 ±4.83 hickness of hub All > 87.5% of pipe nominal wall thickness B(inside diameter,or bore) B(counterbore) (Not applicable for Class 150 lb Slip On(see page 8-17),ap Joint(see page8-32) and Socket Welding(see page8-30 for dimensions) s: NPS , ,-0.0 NPS , ,-0.0 hreaded s (see page 8-40 for dimensions): NPS , ,-0.0 NPS , ,-0.0 mm 27
3 ASME B Class Slip On Socket Weld hreaded apped ong Class 150 hickness tb Drilline Data Class 150 hickness of hickness of ap Min ength Weld ength * ap Joint ength ong Weld ength Bolt ole Number of Bolt oles MM INC # MM INC 15 1/ /2 20 3/ / / /4 FANGES / / / / / /
4 ASME B Class Slip On Socket Weld hreaded apped ong Class 300 hickness tb Drilline Data Class 300 hickness of hickness of ap Min ength Weld ength (Refer ) ap Joint ength ong Weld ength (Refer ) Bolt ole Number of Bolt oles MM INC # MM INC 15 1/ /2 20 3/ / / / / / / / / /
5 ASME B Class Slip On Socket Weld hreaded apped ong Class 400 hickness tb Drilline Data Class 400 hickness of ength ength * ap Joint ength ong Weld ength Bolt ole Number of Bolt oles MM INC & # MM INC 15 1/ /2 20 3/ / / /4 FANGES / / / / / /
6 ASME B Class Slip On Socket Weld hreaded apped ong Class 600 hickness tb Drilline Data Class 600 hickness of ength ength * ap Joint ength ong Weld ength Bolt ole Number of Bolt oles MM INC & # MM INC 15 1/ /2 20 3/ / / / / / / / / /
7 ASME B Class Slip On Socket Weld hreaded apped ong Class 900 hickness tb Drilline Data Class 900 hickness of ength ength * ap Joint ength ong Weld ength Bolt ole Number of Bolt oles MM INC & # MM INC 15 1/ /2 20 3/ / / /4 FANGES / / / /
8 ASME B Class Slip On Socket Weld hreaded apped ong Class 1500 hickness tb Drilline Data Class 1500 hickness of ength ength * ap Joint ength ong Weld ength Bolt ole Number of Bolt oles MM INC & # MM INC 15 1/ /2 20 3/ / / / / / / /
9 ASME B Class hreaded apped ong Class 2500 hickness tb Drilline Data Class 2500 hickness of ength ength * ap Joint ength ong Weld ength Bolt ole Number of Bolt oles MM INC & # MM INC 15 1/ /2 20 3/ / FANGES / / / / / /
10 ASME B Class 150 Series A 1 arge Bore s ASME B16.47A arge Bore s ASME B16.47A Class 150 Series.a hickness tb Drilling Data hickness of W/N Min hickness of Min ength Bolt ole Number of Bolts oles MM INC 1 1 # MM INC (3/8) (3/8) (3/8) (5/8) (5/8) (5/8) (5/8) (5/8) (5/8) (5/8) (5/8) (5/8) (7/8) (7/8) (7/8) (7/8) (7/8) (7/8)
11 ASME B Ring Grooves Class For Class Groove Number Pitch Depth Width Radius At Base Rf Section A B C D E 650(26") 650(26") R (28") 700(28") R (30") 750(30") R (32") 800(32") R (34") 850(34") R (36") 900(36") R (26") R (28") R (30") R (32") R (34") R (36") R All dimensions are in mm. If you could not find the size, please contact us. FANGES 36
12 ASME B Spectacles,Spades&Spacers B V ID B A Spectacle s(figure 8 s), Spades & Spacers Nominalpipe Size Class 150 Class 300 Class 600 Centre ine hickness Min Spacing Web Width Inside Centre ine Spacing hickness Min Web Width Inside Centre ine Spacing hickness Min Web Width MM INC ID A B ID A B ID A B MM INC 15 1/ /2 20 3/ / / / / / / / / / Nominal Pipe Size Class 900 Class 1500 Class 2500 Centre ine hickness Min Spacing Web Width Inside Centre ine Spacing hickness Min Web Width Inside Centre ine Spacing hickness Min Web Width MM INC ID A B ID A B ID A B MM INC 15 1/ /2 20 3/ / / / / / / / N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A All dimensions are in mm. If you could not find the size, please contact us. 37
13 ASME B Orifice s B Orifice s Class 300 Class 600 Class 900 Class 1500 Class 2500 hickness Min ength hru ub W/ hickness Min ength hru ub W/ hickness Min ength hru ub W/ hickness Min ength hru ub W/ hickness Min ength hru ub W/ MM INC B B B B B MM INC / / FANGES / / All dimensions are in mm. If you could not find the size, please contact us. 38
Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationRaised Face. Groove/Ring Number. Face Diameter min in mm
http://www.yaang.com e-mail: sales@yaang.com BS 393 : 1960 British Standard BS 393 : 1960 - Carbon Steel Pipe s (over 4 ches nomal size) for the Petroleum Industry, covers 1 lb to 600 lb weld neck and
More informationInte rated. Piping. Manufacturer & Exporter: A Government of India Recognized Star Export House PIPES TUBES ROUND BAR PLATES SHEETS
ISO 9001-08 ISO 14001-04 OHSAS 18001-07 PE-97/23/EC Certified Company RINA M A R I N E Approved Manufacture PIPES UBES ROUN BAR PLAES SHEES Inte rated Manufacturer & Exporter: A WORL OF FERROUS & NON -
More information304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationENGINEERING CHAIN DIVISION
Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.
More informationELITE FLANGES STEEL FLANGES INDEX
STEEL S INDEX S LASS 50 (PN20) to LASS 2500 (PN 420) Welding Neck, Slip-on, Threaded, Socket Welding Lap Joint, Blind...Page 35 REDUING S Welding Neck, Threaded, Slip-on...Page 7 ORIFIE S LASS 300-500
More informationSPIRAL WOUND GASKETS
SPIRAL WOUND GASKETS www.flexitallic.eu A member of the FLEXITALLIC SPIRAL WOUND GASKETS Contents Page Worldwide Customer Service Network 2 Introduction 3 Gasket Identification 4 Available Gasket Materials
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationOrifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
More informationOne Company, Three Businesses,Your Complete Solution! Product and Service Catalogue NSF61 G-372
One Company, hree usinesses,your Complete Solution! Product and Service Catalogue NSF61 G-372 arwick inc. he D Piping Group Over View... 1-1 SM 778 & 774 Suary of Specification... 2-1 Pipe... 2-2 90 Elbows...
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More informationORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
More informationTable of Contents. Douglas Barwick
100 7 00 arwick c. 3 17 56 Ø100 9 200 56 200 Y EQUIP. SUPPLIER 500 ERED SLUDGE DIGESION NK No.1 60 60 X 69 650 3 17 500 50 Ø100 651 152 CON. ON D-170 GROU RING 6 x 50 (YP.2) ERED SLUDG2 DIGESION NK No.2
More informationKIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199
KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More information3000 lb Socket Weld Fittings - ANSI B16.11/BS 3799
Weld and Threaded Fittings 3000 lb Weld Fittings - ANSI B6./BS 3799 /8 /4 3 /8 / 3 /4 /4 / / 3 4 Centre to Bottom of 45 Tees, & Elbows Bore Diameter Bore Diameter of Fittings Thickness s - Average socket
More informationProduct Data Sheet , Rev KA April 2010 Rosemount 1495 and Contents
Product Data Sheet Rosemount 1495 and 1496 Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union Comprehensive offering Easy to use, prove, and troubleshoot The Rosemount 1495 Orifice Plate
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
More information5/27/12. LOKRING TECHNOLOGY, LLC APOLLO PARKWAY WILLOUGHBY OHIO TEL.: (440) FAX: (440)
5/27/12 Technical Bulletin- New Product Introduction Lokring Technology announces the release of new 333 fittings for use in low temperature carbon steel (LTCS) and sour service (H 2 S) fluid piping systems.
More informationGLOBE 2 WAY CONTROL VALVE SERIES - 110
ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG
More informationDual Chamber Orifice Fitting
Dual Chamber Orifice Fitting Sure Shot Dual Chamber Orifice Fitting 1 11 2 3 10 4 9 8 5 7 6 1. Top Clamping Bar Gasket: Seals easily by tightening square head clamping bar screws. Non- Asbestos flat gasket
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationFabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
More informationDistributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
More information20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
More informationTotaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings
Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationMake Flexitallic Your Global Provider
Make Flexitallic Your Global Provider We re a worldwide organization specializing in local service and meeting each customer s needs. Visit us at Flexitallic.com to browse our comprehensive product range,
More informationLCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
More informationProduct data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H
DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationY O U R G L O B A L G A S K E T P R O V I D E R
Revised 02-12-13 CONTENTS MANUFACTU UNITS 2 INTRODUCTION 3 GASKET IDENTIFICATION 4 AVAILABLE GASKET MATERIALS 5 GASKET SELECTION 6 DIMENSIONAL DATA 7 1 - STYLE CG & CGI TO ASME B16.20 TO SUIT ASME B16.5
More informationGS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More informationAccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes
S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1
More informationFLEXWOUND METALLIC AND SEMI METALLIC GASKETS
FLEXWOUND METALLIC AND SEMI METALLIC GASKETS PRODUCT DESCRIPTION FMI metallic gaskets are specifically designed to withstand extreme temperatures and pressures, combined with chemical exposure. Available
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationDrill Collars. Drill collars from VAM Drilling are available with the following features:
73 Drill Collars Drill collars are thick-walled tubular pieces machined from solid steel bars, forming a component of the bottom hole assembly that provides weight-onbit for improved drilling performance.
More informationDM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
More informationPIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A., Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationImproved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
More information10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
More informationCopper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
More information*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
More informationt o d o d e BRIDAS VÁLVULAS TUBERÍA
ANSI B16.5 Class 150 Forged Flanges Nom. Pipe O T1 R X No.2/ of L21 H B23 L B R L34 B3 D ½ 3. 5 0. 4 4 1. 3 8 1. 1 9 4-0. 6 2 2. 3 8 1. 8 8 0. 8 4 0. 6 2 0. 6 2 0. 8 8 0. 1 2 0. 6 2 0. 9 0. 3 8 ¾ 3. 8
More informationManual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
More informationDESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
More informationHOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
More informationMODEL NUMBER - VALVE SELECTION CODES
Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationThe excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationPIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process
December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationDouble Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationTri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
More informationRING TYPE JOINT GASKETS
TYPE JOINT GASKETS 1 ABOUT US The Flexitallic Group is the international market leader in the manufacture and supply of high quality, high value sealing products. Based on sales and geographic reach, The
More informationTOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More information700E Wafer with support lugs 700K Wafer with support lugs 700S Wafer with support lugs
Large Diameter Rubber Seat Butterfly Valves for General Use E Wafer with support lugs Wafer with support lugs Wafer with support lugs Worm Gear Pneumatic Cylinder Motorized Features and Benefits Simple
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas
- International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.
More informationProduct Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size Gate Valve Globe Valve Check Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 300 API 600 & B16.34
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationGeneral Purpose Motion Control Couplings
General Purpose Motion Control s Sliding Disc (Oldham) Universal ateral (Uni-at) Backlash-free up to 10 8 turns Can tolerate large misalignments Slight damping characteristics Flex-free mechanical action
More informationPiping Systems Data Charts
Piping Systems Data Charts 00 478 335 www.steelandtube.co.nz Face side Chart Reverse side Chart YOUR TOTAL PIPING PACKAGE Steel & Tube is New Zealand s largest distributor Pipes, Pipe Fittings, Valves
More informationSize Range: Body Material: Features:
C O O SVF Flow Controls I N C O R P O R A T E 13560 Larwin Circle Santa Fe Springs, CA 90670 800.783.7836 Fax: 562.802.3114 Sales@SVF.net www.svf.net SERIES 41, 41 & 42 FLANGE ALL VALVES API 607 4T EITION
More informationModel 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More informationSpiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationAdmiralty Bronze Tube Fittings
Admiralty Bronze ube ittings One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components. arnessing the
More informationClarke Valve Shutter Valve
Clarke Valve Shutter Valve The Shutter Valve design ranges from NPS ¼ 12 in size. The Shutter Valve is a new technology and an innovative, compact valve designed in accordance with ASME B16.34, B16.10,
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationSPIRAL WOUND GASKETS (SWG)
SM01 SWG without guide or inner ring This style of gasket is mainly used for male and female flanges or projection and recess flanges and used in load-bearing flange configurations, such as tongue and
More informationSpring-assisted, Non-slam, Axial Flow, Silent Check Valves
DFT s family of In-Line Check Valves are available in a variety of designs: Basic-Check Restrictor Check SCV SCV-R Vacuum Breaker DLC BNCTM Excalibur GLC GLC -Cast Iron PDC DSV ALC FBC WLC WLC -Cast Iron
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationTRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type
TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF
More information