Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
|
|
- Arnold Spencer
- 5 years ago
- Views:
Transcription
1 Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt D X G A Face Face P face R / ¼ R / ¼ 1 ½ R / ½ R / ½ R / ½ R / R / R / R / R / R R / R / R ¼ R ¼ R ¼ R ½ (1) For the of welding s other than standard weall thickness, refer to 54. (2) Class 300 welding flanges of size 24" (609.6mm) and smaller will be bored to match standard wall pipe unless otherwise specified (3) Class 300 orifice flanges will be furnished with 0.06" (1.6mm) raised face, which is included in thickness (t) and length through Hub (T) (4) Bolt lengths for raised face flanges include allowance for orifice and gasket thickness of 0.25" (6.4mm) for NPS 1-12 and 0.38" (9.7mm) for sizes (5) Unless otherwise specified unions of 1" (25.4mm) thru 24" (609.6mm) furnished with carbon steel regular square headed bolts with semifinished American standard heavy series hex nuts. Jack screw size for 1 thru 24 are those shown for length and diameter of bolts Pipe size
2 Class 400 Orifice s D Thickness of (1) Face X raised face Hub Bevel & threaded G A Face joint Face joint of and P Depth of jack screw slot Depth of jack screw slot face face bolt circle of Bolts Stud Bolts Bolt face R / / / ¼ R / / / ¼ 1 ½ R ¾ 4.25 ¾ / ½ R / / / ½ R ¾ 4.25 ¾ / ½ R ¾ 4.25 ¾ / R ¾ 3.00 ¾ / R ¾ 3.00 ¾ / R / R R / R ¼ R ¼ R / R / R ½ R ¾ (1) For the inside diameter of Pipes (corresponding to of welding s), refer to 54. (2) Class 400 flanges of size 3" and smaller will be furnished with 0.06" (1.6mm) raised face, which is included in thickness (t) and length through Hub (T) The 0.25" (6.35mm) raised face for sizes 4" and larger is not included in (t) and (T) (4) Unless otherwise specified, raised face union are furnished with alloy bolt studs per ASTM A193 Grade B7 with American. Standard heavy series hex nuts ASTM A197 Class 2H. (5) On ring joint flanges having a groove depth 0.375" (9.5mm) and less, the distance from the center line of the tap hole to the flange (6) Bolt lengths for raised face flanges include allowance for orifice and gasket thickness of 0.25" (6.4mm) for sizes 4-12 and 0.38" (9.7mm) for sizes bolt lengths for ring type joint flanges include allowance of 0.62" (15.7mm) for sizes " (19.1mm) for sizes and 0.88" (22.4mm) for size 20. See Note (1) to be specified by purchaser
3 Class 600 Orifice s D Thickness of (1) Face X raised face Hub Bevel & threaded G A Face joint Face joint of and P Depth of jack screw slot face jack screw size face bolt circle of Bolts stud Bolt Stud Bolts RF RTJ face R / / / ¼ R / / / ¼ 1 ½ R ¾ 4.25 ¾ ¾ ½ R / / / ½ R ¾ 4.25 ¾ ¾ ½ R ¾ 4.25 ¾ ¾ R ¾ 3.00 ¾ / R ¾ 3.50 ¾ R R / R ¼ R ¼ R / R ½ R / R / R / (1) For the inside diameter of Pipes (corresponding to of welding s), refer to page 54. (2) Class 600 flanges of size 3" and smaller will be furnished with 0.06" (1.6mm) raised face, which is included in thickness (t) and length through Hub (T) The 0.25" (6.4mm) raised face for sizes 4" and larger is not included in (t) and (T) (4) Bolt lengths for raised face flanges include allowance for orifice and gasket thickness of 0.25" (6.4mm) for sizes 1-12 and 0.38" (9.7mm) for sizes bolt lengths for ring type joint flanges include allowance of 0.62" (15.7mm) for sizes " (19.1mm) for sizes and 0.88" (22.4mm) for size 20. (5) Unless otherwise specified, raised face union are furnished with alloy bolt studs per ASTM A193 Grade B7 with American. (6) On ring joint flanges having a groove depth 0.375" (9.5mm) and less, the distance from the center line of the tap hole to the flange See Note (1) to be specified by purchaser
4 Class Orifice s Thickness of (1) Pitch and raised face Hub Bevel & threaded Face Face joint Face joint D X G A P R ¾ 3.50 ¾ Jul R ¾ 3.50 ¾ / R ¾ 3.50 ¾ ¼ to be specified by purchaser R / R / R / R / ½ / / ½ R / / Jul ¼ R / / Jul ¼ 1 ½ R / / ½ R / / Jul ½ R / / ½ to be specified by purchaser CLASS 900 CLASS R / ¾ / R ¾ 3.50 ¾ ¼ R ¾ 3.50 ¾ ½ R / R / R / R ¼ ½ ¾ ½ (1) For the inside diameter of Pipes (corresponding to of welding s), refer to page 54. (2) Class 900 flanges of sizes 1" (25.4mm) through 2 1/2" are the same as for class 1500 (3) Class 900 and 1500 is not included in thickness (t) an d length through Hub (t) (4) Each union includes two carbon steel jack screw bolts with hex nuts. (5) Unless otherwise specified, raised face unions are furnished with alloy bolt studs per ASTM A193 Grade B7 with American. (6) On ring joint flanges having a groove depth 0.375" (9.5mm) and less, the distance from the center line of the tap hole to the flange (7) Bolt lengths for raised face flanges include allowance for orifice and gasket thickness of 0.25" (6.4mm) for sizes 3-12 and 0.38" (9.7mm) for sizes bolt lengths for ring type joint flanges include allowance of 0.62" (15.7mm) for sizes 3-10 and 0.75" (19.1mm) for sizes 12. Depth of jack screw slot face jack screw size face of Stud bolt circle Bolts Bolts Bolt face Pipe size
5 Class 2500 Orifice s O.D. of face O.D. of Thk of Hub Min Length thru Hub Hub of Bevel Bore type Joint D G t T X A B P Diam Bolt Circle of Length of Stud Bolts face Bolt R Jul ½ R / R See note (1) to be specified by purchaster 2 ½ R / R ¼ ½ ½ ¾ (1) For the inside diameter of Pipes (corresponding to of welding s), refer to page 54. (2) Class 2500 flanges will be furnished with 0.25" (6.4mm) raised face, which is not included in thickness (t) and length through hub (T) (4) Unless otherwise specified, raised face unions are furnished with allow bolt studs per ASTM A193 Grade B7 with American. (5) On ring joint flanges having a groove depth 0.375" (9.5mm) and less, the distance from the center line of the tap hole to the flange (6) Class 2500 slip-on flanges are not covered by ANSI B16.5. (7) Bolt lengths for raised face flanges include allowance for orifice and gasket thickness of 0.25" (6.4mm) for sizes 1-12 and 0.38" (9.7mm) for sizes bolt lengths for ring type joint flanges include allowance of 0.62" (15.7mm) for sizes 1-6.
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationt o d o d e BRIDAS VÁLVULAS TUBERÍA
ANSI B16.5 Class 150 Forged Flanges Nom. Pipe O T1 R X No.2/ of L21 H B23 L B R L34 B3 D ½ 3. 5 0. 4 4 1. 3 8 1. 1 9 4-0. 6 2 2. 3 8 1. 8 8 0. 8 4 0. 6 2 0. 6 2 0. 8 8 0. 1 2 0. 6 2 0. 9 0. 3 8 ¾ 3. 8
More informationRosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
More informationProduct Data Sheet , Rev KA April 2010 Rosemount 1495 and Contents
Product Data Sheet Rosemount 1495 and 1496 Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union Comprehensive offering Easy to use, prove, and troubleshoot The Rosemount 1495 Orifice Plate
More informationRaised Face. Groove/Ring Number. Face Diameter min in mm
http://www.yaang.com e-mail: sales@yaang.com BS 393 : 1960 British Standard BS 393 : 1960 - Carbon Steel Pipe s (over 4 ches nomal size) for the Petroleum Industry, covers 1 lb to 600 lb weld neck and
More informationCast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationELITE FLANGES STEEL FLANGES INDEX
STEEL S INDEX S LASS 50 (PN20) to LASS 2500 (PN 420) Welding Neck, Slip-on, Threaded, Socket Welding Lap Joint, Blind...Page 35 REDUING S Welding Neck, Threaded, Slip-on...Page 7 ORIFIE S LASS 300-500
More informationDual Chamber Orifice Fitting
Dual Chamber Orifice Fitting Sure Shot Dual Chamber Orifice Fitting 1 11 2 3 10 4 9 8 5 7 6 1. Top Clamping Bar Gasket: Seals easily by tightening square head clamping bar screws. Non- Asbestos flat gasket
More informationORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationFLANGES FLANGES.
FANGES FANGES 26 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200,
More informationAccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes
S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationORIFICE PLATES, FLANGES FLOW NOZZLES, VENTURI TUBES AND ACCESSORIES
ORIFICE PLATES, FLANGES FLOW NOZZLES, VENTURI TUBES AND ACCESSORIES INTERNATIONAL METAL ENGINEERING International Metal Engineering Orifice Plates A t Model 785 Orifice Plate is a differential pressure
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationMODEL 5800 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL
Installation, Operation, and Maintenance Instructions MODEL 5800 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationSeries 7100 Flow-Lift Piston Check Valve
Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationOrificeMaster Specifications
Issue/Rev. 0.2 (10/06) Single Chamber Orifice Fittings OrificeMaster Specifications Bulletin SSOR005 FMC Technologies Measurement Solutions Orifice- Master Single Chamber Orifice Fitting is manufactured
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationWellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationTYPE E Main Valve Sizes 3 /8 through 12
Technical Data SD 3001E PRINTED IN U.S.A. SD 3001E/9709 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 A B TYPE E MAIN VALVE FACE TO FACE DIMENSIONS C D E DIMENSIONS (inches)
More information' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationThe PMI Dilution Probe for In-Situ Sample Conditioning of Stack Gases
The PMI Dilution Probe for In-Situ Sample Conditioning of Stack Gases 1. Introduction The PMI Dilution Probe is designed to function as a sample conditioning and transport system for extracting flue gas
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationHeavy welded steel outlet half. 3/4-inch NPT test plug. Benefits
622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationFull Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationInstallation and maintenance instructions
Before installation these instructions must be fully read and understood Operation General The 9200 Series Automatic Recirculation Control valve is designed to provide protection for low pressure (ASME/ANSI
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationDatasheet Rev.3 Feb 2015 Venturi tube
Datasheet Rev.3 Feb 2015 Venturi tube Venturi tube design based on IS5167, ASME.MFC.3M and IS TR15377 :2007 industry standards No need for calibration standardised principle Accuracy, repeatability and
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationHigh-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
More informationPipe Flanges and Flanged Fittings
ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe Flanges and Flanged Fittings NPS ½ Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More information304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationSEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
More informationSWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
More informationLine Blank Specification
1.0 Purpose Line Blank Specification Page 1 of 14 1.1 This document provides specifications for line blanks (a.k.a. slip blanks, pancakes, paddle blanks) NPS 1/2 through NPS 24 up through Class 1500 and
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationTable of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
More informationThe Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
More informationHousing 3 GT/GTS Gas Turbine Meter
PL4802.2 Housing 3 GT/GTS Gas Turbine Meter 12 6 5 4 11 9 2 8 7 3 1 2 3 GT/GTS Gas Turbine Meter Housing Item No. Description Qty. Common To All Variations Part Numbers Product Variations 275 PSIG 1440
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES. Pressure Seal - Bolted Bonnet Cryogenic.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES Pressure Seal - Bolted Bonnet Cryogenic. 1 Design 2 Outside 3 Face 4 Non 5 Suggested 6 Dimension 7 Special
More informationAir Champ DPC-9T & DPC-11T Static Torque in Inch-Pounds. Air Pressure in PSI
CLUTCHES DPC SERIES DUAL PLATE CLUTCHES This Series, specified by component, allows you to custom design for specific application requirements: Static Torque capacity up to 36,000 In. Lbs. @ 80 psi Maximum
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationTEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: SR-FOR SPARTAN RUNNING BOARD FORD ECONOLINE 99-14
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: SR-FOR203796 SPARTAN RUNNING BOARD FORD ECONOLINE 99-14 PARTS LIST: 1 Driver/Left Side Spartan Running Board 2 10mm Lock Washers 1 Passenger/Right Side
More informationSECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationSECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL
SECTION 22 10 10 PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and
More informationPARTS & ASSEMBLY DRAWINGS SECTION 1. Jacket
000SVRM-3 /7 CONTROL VALVE PARTS & ASSEMBLY DRAWINGS SECTION Base Valve O-ring O-ring Sleeve Cage/Barrier Assembly Spacer Jacket Description 2 Valve 3 Valve Base Valve, 0-40 psi 2255-000 2239-0090 Base
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
More informationGate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
More informationFord Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
More informationDouble Offset High Performance Butterfly Valve
Double Offset High Performance Butterfly Valve INSTALLATION OPERATION MAINTENANCE APOLLO INTERNATIONAL HIGH PERFORMANCE BFV IOM - Page 2 of 20 TABLE OF CONTENTS INTRODUCTION 3 PRODUCT STORAGE 3 PRODUCT
More informationFisher POSI-SEAL A31D Double-Flange High-Performance Butterfly Valve
Instruction Manual A31D Valve Fisher POSI-SEAL A31D Double-Flange High-Performance Butterfly Valve Contents Introduction... 1 Scope of Manual... 1 Description... 2 A31D Valve Specifications and Materials
More informationGRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case
NO. 1 NORWAY FLAT COUNTERSUNK HEAD - 20 x 3/4 - -1/2-3/4-20 x 2-20 x 2- - 20 x 2-1/2-20 x 2-3/4-20 x 3-18 x 3/4-18 x 1-18 x 1-3/4-18 x 2-18 x 2- - 18 x 2-1/2-18 x 2-3/4-18 x 3-16 x 1-16 x 1- - 16 x 1-1/2-16
More informationEMERSON. CONSIDER IT SOLVED
Orifice Plates and Plate Sealing Units EMERSON. CONSIDER IT SOLVED Manufacturing Techniques Orifice plate manufacture at Daniel is quality-controlled from selection of raw material to packaging of the
More informationThe Solution For The Valve Problems Plug Valves
www.3zvalve.com The Solution For The Valve Problems Plug Valves CONTENTS The Solution For The Valve Problems Plug Valves DBB Group Double Block & Bleed Valves 5 Soft Seated Group Sleeved Valves 23 Lined
More informationPony V Page 1 of 24 Battery Mounting Bracket
5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24
More informationSteel Products for Water, Wastewater and Industrial Piping Systems
Steel Products for Water, Wastewater and Industrial Piping Systems Couplings Flange Adapters Expansion Joints Dismantling Joints Joint Harnesses Custom Fabrication www.dresser.com Piping Specialties Bradford,
More informationSeries 2000 Control Valves Globe-Double Seated, Top & Bottom Guide
Product Specification PS100401 2010. 04 Series 2000 Control Valves Globe-ouble Seated, Top & Bottom Guide for promotes more tightness and heavy duty control Series 2000 Single Seated Globe Valve with Model
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationCLARKSON URETHANE KNIFE GATE VALVES FIGURE SU10R
CLARKSON URETHANE KNIFE GATE VALVES Installation and maintenance instructions for field replaceable urethane lined knife gate valves GENERAL INFORMATION The Clarkson SU10R knife gate valve offers bi-directional
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More information13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
More informationBALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
More informationHigh Pressure Access Systems
High Pressure Access Systems Operation and Maintenance Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358-4202 Fax: (256)
More informationP630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
More informationStep 4 Press the sleeve gear assembly through the center of the bearing plate assembly so that the gear and bearing are in contact.
Rotational Center (ip-3009_page) : DATE: 0//207 QTY Parts Needed On This Page Tools Needed On This Page AM-303 40T Steer Gear, plated Arbor Press AM-0253 /2" ID, /2" Long Bushing 5/32 Allen Wrench AM-002
More information