PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)
|
|
|
- Julianna Hamilton
- 6 years ago
- Views:
Transcription
1 May 2016 Piping PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY September 2000 Issued May 2007 Complete Revision May 2001 Tehcnical Correction May 2016 Complete Revision Not printed with State funds
3 Piping Material Specification Line Class 1NM0B02 May 2016 SERVICE: Process MATERIAL: Alloy 254 SMO (UNS S31254) RATING CLASS: 150, ASME B DESIGN CODE: ASME B TEMPERATURE LIMIT: -29 C to 204 C (-20 F to 400 F) (Note 09) STRESS RELIEF: None Required NOMINAL CORROSION ALLOWANCE: None EXAMINATION: Per ASME B31.3 PRESSURE - TEMPERATURE RATINGS - METRIC For NPS 1/2 through NPS 24 (Full flange ratings per ASME B16.5, Table ) TEMP C -29 to Bar PRESSURE - TEMPERATURE RATINGS - US CUSTOMARY UNITS For NPS 1/2 through NPS 24 (Full flange ratings per ASME B16.5, Table II ) TEMP F -20 to psig ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE PIPE 23 1/2 2 40S Alloy 254 SMO, SMLS, ASTM A312-S S Alloy 254 SMO, SMLS, ASTM A312-S S Alloy 254 SMO, EFW, ASTM A358-S31254, CL 1 or 3 (Ej=1.00) NIPPLES 03, 23 Branch 1/2 1 1/2 40S Alloy 254 SMO, SMLS, ASTM A312-S31254 Swage (CONC) 1/2 1 1/2 40S Alloy 254 SMO, ASTM A403-WP S31254-S, MSS SP-95 Swage (ECC) 1/2 1 1/2 40S Alloy 254 SMO, ASTM A403-WP S31254-S, MSS SP-95 FITTINGS 02 SW Pipet 170 1/2 1 1/2 Class 300 Weld Alloy 254 SMO, ASTM A182-F44 THRD Pipet 03, 170 1/2 2 Class 300 Weld Alloy 254 SMO, ASTM A182-F44 SW Lateral Pipet 170 1/2 1 1/2 Class 300 Weld Alloy 254 SMO, ASTM A182-F44 90 ELL 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B ELL 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Tee 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Tee (RED) 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Plug 03 1/2 2 THRD Alloy 254 SMO, ASTM A182-F44, round head, ASME B16.11 Plug 53 1/2 1 1/2 PE Alloy 254 SMO, ASTM A182-F44, round head Coupling 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Coupling (RED) 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Cap 1/2 1 1/2 Class 3000 SW Alloy 254 SMO, ASTM A182-F44, ASME B16.11 Reducer (CONC) 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Reducer (CONC) 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Reducer (ECC) 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Reducer (ECC) 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 BW Pipet 2 20 Weld Alloy 254 SMO, ASTM A182-F44, MSS SP LR ELL 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B LR ELL 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B LR ELL 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B LR ELL 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Tee 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Tee 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Tee (RED) 2 6 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 Tee (RED) 8 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-WX, ASME B16.9 Cap 2 24 Weld Alloy 254 SMO, ASTM A403-WP S31254-S, ASME B16.9 VALVES Gate 06 1/2 2 Class 150 T/SW CK3MCuN body w/ CK3MCuN/F44 trim GA01SV200 Gate 1/2 2 Class 150 SW CK3MCuN body w/ CK3MCuN/F44 trim GA01SV300 Gate 15 1/2 2 Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim GA01SV500 Gate 12 1/2 2 Class 300 RF CK3MCuN body w/ CK3MCuN/F44 trim GA03SV500 Gate 3 24 Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, FP GA01SV501 Globe 1/2 2 Class 150 SW CK3MCuN body w/ CK3MCuN/F44 trim GL01SV300 Globe 3 12 Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim GL01SV500 Process Industry Practices Page 1 of 3
4 Piping Material Specification Line Class 1SV0S01 May 2016 ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE VALVES Lift Check 61 1/2 2 Class 150 SW CK3MCuN body w/ CK3MCuN/F44 trim, piston CL01SV300 Lug Dual PLT 07, 26, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim CD01SV500 Check Dual PLT Check 26, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim CD01SV701 Wafer Dual PLT 07, 26, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim CD01SV700 Check Swing Check 62 1/2 2 Class 150 SW CK3MCuN body w/ CK3MCuN/F44 trim CS01SV300 Swing Check Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim CS01SV500 Ball 09 1/2 2 Class 300 SW CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST BA03SV300 Ball Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST BA01SV500 Ball 08, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, FP BA01SV501 Ball Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO BA01SV502 Ball 08, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO, FP BA01SV503 Ball Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO BA01SV504 Ball 08, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO, FP BA01SV505 Lug Butterfly 07, 09, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST BF01SV700 Lug Butterfly 07, 09, Class 150 RF CK3MCuN body w/ CK3MCuN/F44 trim, RPTFE ST, GO BF01SV701 FLANGES 02 Socket Weld 1/2 1 1/2 Class 150 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Socket Weld 12, 1/2 1 1/2 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Blind 1/2 24 Class 150 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Blind 12 1/2 24 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Weld Neck Class 150 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Weld Neck 12, Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Slip-on 2 24 Class 150 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Slip-on Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.5 Pair WN Orifice 2 24 Class 300 RF Alloy 254 SMO, ASTM A182-F44, ASME B16.36, SW taps GASKETS BOLTING Stud Bolts Cap Screws 1/2 24 Class 150 1/16" thick filled or reinforced PTFE, ASME B /2 24 Class 300 1/16" thick filled or reinforced PTFE, ASME B16.21 ASTM A193, Gr B7 stud, w/ 2 heavy hex nuts, ASTM A194, Gr 2H ASTM A193, Gr B7 heavy hex Process Industry Practices Page 2 of 3
5 Piping Material Specification Line Class 1NM0B02 May BRANCH CONNECTION Legend and Chart BRANCH 24 T 20 E T 18 E E T 16 W E E T 14 W W E E T 12 W W W E E T 10 W W W W E E T 8 W W W W W E E T 6 W W W W W W E E T 4 W W W W W W W E E T 3 W W W W W W W W E E T 2 W W W W W W W W W E E T 1 1/2 S S S S S S S S S S S S T 1 S S S S S S S S S S S S E T 3/4 S S S S S S S S S S S S E E T 1/2 S S S S S S S S S S S S E E E T /2 1 3/4 1/2 HEADER E S T W Reducing Tee SW Pipet Tee BW Pipet NOTES: 02 All butt-welded component thicknesses shall match the pipe thickness. 03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment. 06 These valves shall be used only for vent, drain, and instrument connections. 07 These valves have no flanges but are installed between line flanges with extra-length bolts. 08 Full-port valves shall be used if indicated on the P&ID. 09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions shall be consulted. 12 These flanges shall be used only to match Class 300 flange connections at control valves and special equipment. 13 Weld-neck flanges shall be used against butt-weld fittings. Otherwise, slip-on flanges shall be used. 15 These valves shall be used if mating to flanged nozzles. 23 Sch 80S pipe and pipe nipples shall be used for threaded connections for sizes NPS 1/2 through NPS These check valves shall be used only if indicated on the P&ID. 53 To be used where required for pipe supports, dummy legs and unused socketweld taps. 61 These check valves shall be installed in a horizontal position with cover up. 62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow. 63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow. 170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph Use cap screws for valves or flanges containing threaded holes. It is recommended that cap screws be supplied by valve supplier/manufacturer to ensure proper length for all threaded holes. REFERENCES: Process Industry Practices (PIP) PIP PNF Vents, Drains, and Instrument Connection Details PIP PNSMV023 - Stainless Steel Gate Valve Descriptions PIP PNSMV024 - Stainless Steel Globe Valve Descriptions PIP PNSMV025 - Stainless Steel Check Valve Descriptions PIP PNSMV026 - Stainless Steel Ball Valve Descriptions PIP PNSMV027 - Stainless Steel Butterfly Valve Descriptions Process Industry Practices Page 3 of 3
PIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process
May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
PIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process
December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil
May 2016 Piping PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, 0.000 C.A., Lube Oil & Seal Oil PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process
May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process
March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, 0.063 C.A. Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
COMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
COMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
April Process Industry Practices Vessels. PIP VEFTA100 Tank Miscellaneous Details
April 2010 Process Industry Practices Vessels PIP VEFTA100 Tank Miscellaneous Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
PIP PNSMV054 Nickel and Nickel Alloy Globe Valve Descriptions
February 2015 Piping PIP PNSMV054 Nickel and Nickel Alloy Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
PIP PNSMV007 Carbon Steel Butterfly Valve Descriptions
October 2017 Piping PIP PNSMV007 Carbon Steel Butterfly Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
Pipeline Systems PIP PLSMV008 Carbon Steel Plug Valve Descriptions
October 2017 Pipeline Systems PIP PLSMV008 Carbon Steel Plug Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
PIP ELEMT01 Guidelines for Selecting IEEE and API Standards for AC Motors 250 HP (185 kw) and Larger
COMPLETE REVISION April 2013 Process Industry Practices Electrical PIP ELEMT01 Guidelines for Selecting IEEE and API Standards for AC Motors 250 HP (185 kw) and Larger PURPOSE AND USE OF PROCESS INDUSTRY
PIP REEE003 Guidelines for General Purpose Non-Lubricated Flexible Couplings
September 2016 Machinery PIP REEE003 Guidelines for General Purpose Non-Lubricated Flexible Couplings PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
DRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
Piping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
Specification for: Merck. Project: Caustic Tank. Elkton, VA. Title PIPING SPECIFICATIONS. Jacobs Project No. 63PZ0234. Client Number.
Specification for: Merck Project: Caustic Tank Elkton, VA Document No: 63PZ0234-B-SP-15101SP101S Title PIPING SPECIFICATIONS Jacobs Project No. 63PZ0234 Client Number. Jacobs Discipline Lead Jacobs Project
PIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
Herpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
CARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I.
Steam Safety Valve 9100 SAPAG High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I. Features National Board Certified to ASME I (3% overpressure,
PIP RESP73H Application of ASME B Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
May 2013 Process Industry Practices Machinery PIP RESP73H Application of ASME B73.1-2001 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process PURPOSE AND USE OF PROCESS INDUSTRY
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER. SECTION.0 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Corporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves...
FORGED STEEL VALVES Table Of Contents Corporate Overview... 2,3 How To Order... 4-8 Gate Valves... 9-14 Globe Valves... 15-22 Check Valves... 23-30 Cryogenic Valves... 31-40 Integral Flanged Valves...
PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
Forged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Gate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
BALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
Series 7100 Flow-Lift Piston Check Valve
Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention
GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
Division 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
Compac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
DEMCO DEMCO RESILIENT SEATED BUTTERFLY VALVE. Installation, Operation and Maintenance Manual D I S T R I B U T E D V A L V E S DEM-RSBV-IOM
DEMCO RESILIENT SEATED BUTTERFLY VALVE DEMCO TABLE OF CONTENTS DEMCO RESILIENT SEATED BUTTERFLY VALVE Bill of Materials... 1 Scope... 3 Nameplate Information... 3 Storage... 3 Installation... 4 End-of-Line
C&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
Duplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
Please note this is a condensed catalog. For a complete version, contact Velan directly.
Please note this is a condensed catalog. For a complete version, contact Velan directly. VELAN VALVES IN POWER With an installed base covering over 300 nuclear power plants and over 2,000 thermal power
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
SECTION FACILITY FUEL OIL PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
w w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.
A trusted name in industrial valve company FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.34 CATALOG NUMBER FFI -1004 TABLE OF CONTENTS
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
GA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
DEMCO Resilient-Seated Butterfly Valve
Document Number: TC003001-01 Revision: Rev 2 DEMCO Resilient-Seated Butterfly Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS... 3 SCOPE... 5 NAMEPLATE INFORMATION...
Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
Vogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
F-17 CATALOG. Forged Steel Valves
F-17 CATALOG Forged Steel Valves Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
FLOW NOZZLES - 3 SAMIL INDUSTRY CO.,LTD. IN THIS CHAPTER - 3
- 3 IN THIS CHAPTER - 3 Here is introduce the measuring primary devices of fluid flow by means of the differential pressure that is flow nozzles to use at high pressure and temperature than the orifice
Full Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
TECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Model F Dry Valve with Trim Valve Size Part Number 3 13764PTR 4 13765PTR 6 13766PTR Standard Trim Sets include galvanized nipples and fittings. 4 Dry Valve Shown General Notes: Notes: For use
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
Instructions for Installation, Operation, Care and Maintenance
Model D Dry Pipe Valve Bulletin 350 Rev. S Bulletin 350 Rev. S Instructions for Installation, Operation, Care and Maintenance 4 (100mm) 6 (150mm) Valve With Model D Trimmings Listed by Underwriters Laboratories,
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
Xiamen Landee Industries Co., Ltd was founded on 14th May 2001;
ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc;
HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
TABLE OF CONTENTS. 2
TABLE OF CONTENTS HIGH PERFORMANCE BALL VALVES...PAGE 3 FIRE SAFE BALL VALVES...PAGE 6 SEAL WELD BALL VALVES...PAGE 9 MULTI PURPOSE BALL VALVES...PAGE 12 BUTTERFLY BALL VALVES...PAGE 17 MULTI-TURN VALVES...PAGE
Proven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
flowserve.com Durco PlugSeal Valve ASME Class 600 Plug Valves Serving the Worldwide Desalination Industry Experience In Motion
flowserve.com Durco PlugSeal Valve ASME Class 600 Plug Valves Serving the Worldwide Desalination Industry Experience In Motion To Access Literature On-line More information about FLOWSERVE products can