Xiamen Landee Industries Co., Ltd was founded on 14th May 2001;
|
|
- Madison Hutchinson
- 6 years ago
- Views:
Transcription
1
2 ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc; Our products are used in Oil & Gas, Fertilizer, Petrochemical, Construction, Power plant, Refinery, Water, Food, etc; Landee has supplied products to world wide Oil and Engineering Companies ; Annual sales volume up to 20million.
3 OCTG PRODUCTS Plates Heat Exchanger Tube Line Pipes Valves Flanges Fittings Gaskets MATERIAL Carbon steel Stainless Steel Super Duplex Alloy steel Cu-Ni Alloy Ductile Iron Fasteners
4 CERTIFICATES SONCAP-Nigeria QP- Qatar ISO certificate PDO-Oman Business license
5 Annual Turnover (unit 1 million USD)
6 Main Clients End users
7 OCTG
8 API5CT Coupling
9 API5CT Nipple Coupling and Cross-over
10 API5CT Pup Joint
11 Cu-Ni Tubes
12 U-Tubes for Heat Exchanger
13 Finned Tubes
14 Plate packing
15 Welding Machine
16 Pig Launcher and Receiver
17 Steam-Water Separator Vessel export to Philippines
18 Pipe Cutter
19 Pipe SMLS Pipe SS Pipe ERW Pipe LSAW Pipe SSAW Pipe DI Pipe
20 Valves Ball Valve Exported to PDVSA in Venezuela through our client in USA Special package
21 Valves Top Entry Ball Valve Exported to Kuwait through our client in USA (Client appointed Brand ENKAY) Ball Valve Exported to Iraq (Landee Brand)
22 Valves 900# BW 36 Marking Make the delivery after package to the Shanghai Seaport from factory
23 Valves Ball Valve Gate Valve Gate Valve under the Silver Grey Painting process Package
24 Valves Through Conduit Gate Valve Globe Valve Swing Check Valve Plug Valve
25 Valves Plug Valve under the painting process High Performance Butterfly Valve
26 Valves Aluminum Bronze Valve B148 C95800
27 Valves Alloy Steel Valve A182 F11 A217 C12A
28 Valves All kinds of Forged Steel Valves DIN Standard Gate Valve Ductile iron gate valve
29 Valves Cast Iron Body Ball Valves Wafer Butterfly Valve Wafer Duo Plate Check Valve
30 Valves Flanged Ends Butterfly Valve Air Valves Y-Strainer Basket-Strainer
31
32 Flanges 100% Forged Blind Flang Welding Neck Flange Slip-on Flange NPT Thread Flange Spectacle Blind Flange
33 Flanges Coating and marking Yellow Golden Coating Marking Detail Marking Detail
34 Fittings ASTM A234 WPB, ASTM A420 WPL6 Elbow A860 WPHY 60 Bends FBE Coating ASTM A234 WPB R=5D Bends 24 Delivery from our factory to Dalian Seaport
35 Fittings BW Concentric Reducer (S31803) ASTM A234 WPB Cap Reducer (Concentric & Eccentric Reducer)
36 Fittings BW Ends Tee (Equal Tee, Reducing Tee, Barred Tee) Elbow, Swage Nipple, Pipe Nipple, Tee, Coupling, Union Kinds of Stainless Steel BW Fittings Landee Brand Tee export to PEMEX company in Mexico
37 Fittings Socketolet Weldolet Flangeolet Hammer Union Hammer Union
38 Bolts & Nuts PTFE Coated Bolts/Hex. Nuts ASTM A193 B7M Bolts SS316 Bolts with 2Nuts/Washers ASTM A194 2HM Hex. Nuts Stainless Steel Bolts/2Hex. Nuts ASTM A193 B7 Bolts
39 Bolts & Nuts
40 Gaskets Spiral Wound Gasket Flat Gasket Spiral Wound Gasekt Spiral Wound Gasket Insulation Gasket Kit Package of Gasket
41 Factories Tour Valve (KOFLOW Group) Workshop for our Valve factory CNC Equipment Workshop
42 Factories Tour LSAW Pipe API5L X70 PSL2 LSAW Pipe Mill Equipment LSAW Pipe PSL2 Seamless Pipe Mill
43 Pipe Mills Factories Tour
44 Factories Tour BW Pipe Fitting Pipe Fitting Workshop
45 Factories Tour Fitting Workshop Fitting Workshop
46 Factories Tour Raw Materials in our Flange factory Cutting the raw material
47 Factories Tour Forging Flanges Machining Flanges
48 Factories Tour Impact Test Chemical Composition Mechanical Properties Micro Structure
49 Customers Visiting Albania Austria Belgium Cayman Island
50 Customers Visiting Chile Costa Rica France Ghana
51 Customers Visiting Indonesia Ireland Iran Korea
52 Customers Visiting Nigeria Nigeria Nigeria Nigeria
53 Customers Visiting Pakistan Pakistan Pakistan Pakistan
54 Customers Visiting Pakistan Philippines Philippines Philippines
55 Customers Visiting Singapore Philippines Russia Saudi Arabia Singapore
56 Customers Visiting Singapore Swaziland Syria UAE
57 Customers Visiting UK USA USA USA
58 Customers Visiting USA USA USA Venezuela
59 Customer Visiting Factories UAE customer visit LSAW pipe mill Albania customer check the dimension
60 Customer Visiting Factories Iraq customers check pipeline mill Customer check the pipe dimension
61 Customer Visiting Pakistan customer visit valve factory Saudi customer visit valve factory
62 Customer Visiting Iran customer visit fitting factory Albania customer visit fitting factory
63 Customer Visiting New Zealand customer visit Flange factory Turkey customer visit flange factory
64 Return Visit Abroad Pakistan Saudi Arabia Saudi Arabia Philippines
65 Return Visit Abroad Iran Oil and Gas Show on 18th April 2008 Iran
66 Creating Value Pursuing Excellence! Xiamen Landee Industries Co., Ltd Suit 2201 Huiteng Metropolis, No.321 Jiahe Road, Xiamen, P.R.C. Postal Code: Tel: Fax: / landee@landee.cn
C&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationPIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationUniversal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More informationImports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
More informationCharging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators
Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU is used to charge accumulators with nitrogen or to check
More informationUniversal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. Description 1.1. Function The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More information19,000 38,500. Mean Crop. 5, ,827 Max , ,869 Last Year 6, ,
YTD Inventory / Shipment Report In Shell Basis Crop: 2017 Monthly Market Prices FCA Hamburg Iranian Dried In Shell 28/30 Fandoghi Pistachios 10th Marketing Month YTD Carry in from previous year 3,000 Total
More informationFEDERAL RESERVE statistical release
FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
More informationTable 23 Production of minor oil products from refineries - by type Thousand metric tons
Table 23 Production of minor oil from refineries - by type Table Notes Data refer to production from refineries of refinery, ethane, naphtha, lubricants, bitumen, paraffin, petroleum, white spirit, and
More information- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.
CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationPIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process
May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationPIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process
March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, 0.063 C.A. Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More information35,000 52,000 87,000 1,600 8, ,400 76,600. Mean Crop. Monthly YTD Min ,671 8,211 Max. 2017
YTD Inventory / Shipment Report In Shell Basis Crop: 2018 Monthly Market Prices FCA Hamburg Iranian Dried In Shell 28/30 Fandoghi Pistachios Total Consumption Ending Inventory 2nd Marketing Month YTD Carry
More informationWorld Air Conditioner Demand by Region
World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning Industry Association 1 World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationProduction (bbl/day)
1 of 5 14/09/2011 22:15 From Wikipedia, the free encyclopedia This is a list of countries by oil production mostly based on CIA World Factbook data. [1] Note that oil production refers to the sum of barrels
More informationLATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
More informationcontrol & instrumentation solutions RIM10 series rotor insertion flowmeters
control & instrumentation solutions RIM10 series rotor insertion flowmeters E X P E R T I S E S O L U T I O N S S U S T A I N A B I L I T Y R I M 1 0 RIM10 series rotor insertion flowmeters Versatile enough
More informationCSM-K. high capacity clean steam generator
CSM-K high capacity clean steam generator High capacity clean steam generator Spirax Sarco, the world s leading steam system specialist, has combined modern technology with package design expertise to
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationPIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process
December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More information+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
More informationProduction of minor oil products from refineries - by type Thousand metric tons
Production of minor oil from refineries - by type Table 23 Table Notes Data refer to production from refineries of refinery, ethane, naphtha, lubricants, bitumen, paraffin, petroleum, white spirit, and
More informationTable 13 Production, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years
, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years Table Notes The Reserves / ratio refers to crude oil and natural gas liquids.
More informationI. World trade in Overview
I. World trade in - Overview Table I.1 Growth in the volume of world merchandise exports and production, 2-5 (Annual percentage change) 2-5 23 24 World merchandise exports 4.5 5. 9.5 6. Agricultural products
More informationSummary of debt securities outstanding
Summary of debt securities outstanding All countries........................ 22,695 15,852 6,665 3,427 1,762 Developed countries........................ 16,504 13,087 5,869 2,716 701 Austria 510 173 44
More informationExcel Metal & Engg Industries
+91-8048077466 Excel Metal & Engg Industries https://www.excel-metal.com/ We are one of the eminent & influential manufacturer, exporter & trader of an exclusive assortment of the products to our valued
More informationFLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
More informationThe following products are added in Table 2 of Market Linked Focus Product Scheme, for export made with effect from :
The following products are added in Table 2 of Market Linked Focus Product Scheme, for export made with effect from 01.05.2013: Sector / Description RITC Code Country Rate Percentage ENGINEERING SECTOR
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationToyota IMV Sales Reach Global 5 Million-unit Mark
Apr. 06, 2012 Toyota IMV Sales Reach Global 5 Million-unit Mark Toyota City, Japan, April 6, 2012 Toyota Motor Corporation (TMC) announces that worldwide cumulative sales of its Innovative International
More informationTable 13 Production, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years
Table 13, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years Table Notes The Reserves / ratio refers to crude oil and natural
More informationTable 16 Refinery distillation capacity, throughput and output Thousand metric tons
Million metric tons Table 16 Refinery distillation capacity, throughput and output Table Notes Output is equal to the sum of production from refineries for aviation gasoline, bitumen, gas/diesel oil, ethane,
More informationTable 13 Production, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years
Million metric tons Million metric tons Table 13, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years Table Notes The Reserves
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT March 2015 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara, Phnom
More informationYOUR PARTNER IN MIXING
YOUR PARTNER IN MIXING 53 101 60 110 33 29 120 68 99 43 104 11 23 53 14 37 97 23 33 67 21 97 30 17 15 23 67 67 29 14 11 25 24 202 37 26 45 33 43 21 17 12 77 32 23 67 74 47 159 49 37 90 10 46 43 52 17 647
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT December 2015 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
More information67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT March 2018 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara, Phnom
More information6. Butterfly Valves & Accessories
1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT February 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT October 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT May 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara, Phnom
More informationQuality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT September 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationPIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process
May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationCertifications & Approvals
Industrial Certifications & Approvals Matco-Norca is committed to maintaining a high standard of quality for all the products we offer. Most products in this catalog are labeled with a designated approval
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationJURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 10 NOVEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
More informationEU Dairy Exports to Third countries
Milk Market Observatory TRA.EU.Extr Latest update : 12.6.218 Source : Eurostat (COMEXT) EU Dairy Exports to Third countries (January-April) 16 14 12 1 8 6 4 2 BUTTER exports 1 Tonnes 162 135 137 12 94
More informationJURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 15 DECEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
More informationNatural gas. 26 Reserves 28 Production and consumption 33 Prices 34 Trade movements. 67 th edition
Natural gas 26 Reserves 28 Production and consumption 33 Prices 34 Trade movements 67 th edition Natural gas Total proved reserves At end 1997 At end 2007 At end 2016 At end Trillion Trillion Trillion
More informationAMARSONS PIPETECH. Piping Solutions ME CO LLC SUPPLIERS OF ELECTRICAL, ELECTRO MECHANICAL & PIPING MATERIALS
AMARSONS PIPETECH ME CO LLC SUPPLIERS OF ELECTRICAL, ELECTRO MECHANICAL & PIPING MATERIALS Piping Solutions Email : info@amarsonspipetech.com Web : www.amarsonspipetech.com Company Overview About Us AMARSONS
More information2011 Third Quarter Update 17 November 2011
2011 Third Quarter Update 17 November 2011 Operations Highlights Group (In HK$ millions) 3Q11 3Q10 2011 2010 Sales 1,334 1,125 +19% 3,983 3,262 +22% Gross profit 767 638 +20% 2,348 1,875 +25% Gross margin
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT October 2018 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationKINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT September 2018 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
More informationcontrol & instrumentation solutions The AEL6 series smart electric actuator
control & instrumentation solutions The AEL6 series smart electric actuator E X P E R T I S E S O L U T I O N S S U S T A I N A B I L I T Y 1 A E L 6 AEL6 series Our newly launched smart electric actuator
More informationIY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant
www.ihsungtech.co.kr IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant Lead the Innovation, Since 1993 Always Together, Always Success Company Profile
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV
FLANGED FULL BORE BALL VALVE, SERIES MBV 1 MBV 25 Issue 4/99 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Pulp & paper production. Liquids. Water. Power plants.
More informationGlobal Competitiveness Index Rankings
APPENDIX B Global Competitiveness Index 2017 2018 Rankings The following pages report the GCI 2017 2018 rankings for the three subindexes (Table 1) and their corresponding pillars (Tables 2 4). Detailed
More informationCOMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
More informationREFERENCE LIST FOR THE LAST 3 YEARS - DIRECT PROJECTS OR THROUGH EPC CONTRACTOR TRADER
DBADAN OIL REFINING CO. IRAN FLANGES K.O.C. KUWAIT FLANGES - BW FITTINGS VARIOUS SIZES AGIBA PETROLEUM EGYPT FLANGES PEDEC / N.I.O.C. TABNAK GAS FIELD DEVELOPMENT 2003 IRAN BW FITTINGS A234 WPB / WPHY
More informationAs an ISO certi ed organization, our dedicated team ensures each client is provided with cost-effective and highest quality products and services.
COMPANY PROFILE 2 As an ISO certi ed organization, our dedicated team ensures each client is provided with cost-effective and highest quality products and services. Oil and Gas companies require a high
More information2.01 Availability of latest technologies
2.01 Availability of latest technologies To what extent are the latest technologies available in your country? [1 = not available; 7 = widely available] 2010 2011 weighted average RANK COUNTRY/ECONOMY
More informationMETAL SEATED NELDISC BUTTERFLY VALVES, SERIES L12
METAL SEATED NELDISC BUTTERFLY ALES, SERIES L12 2 L12 20 Issue 4/99 SIZES AND PRESSURE RATINGS Size range DN 80-600, 3" - 24". Pressure ratings PN 10, 16, 25 and ANSI 150. FEATURES Third-generation, metal-to-metal
More informationJURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS STATUS 27 JULY 2018 ORIGINAL CONVENTION 27-05-2010) OR OR 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013
More informationGOVERNMENT OF INDIA MINISTRY OF HEAVY INDUSTRIES AND PUBLIC ENTERPRISES DEPARTMENT OF HEAVY INDUSTRY
GOVERNMENT OF INDIA MINISTRY OF HEAVY INDUSTRIES AND PUBLIC ENTERPRISES DEPARTMENT OF HEAVY INDUSTRY 2175. PROF. SAUGATA ROY: SHRI RAMSINH RATHWA: LOK SABHA UNSTARRED QUESTION NO. 2175 TO BE ANSWERED ON
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationTable 16 Refinery distillation capacity, throughput and output Thousand metric tons
Table 16 Refinery distillation capacity, throughput and output Table Notes Output is equal to the sum of production from refineries for aviation gasoline, bitumen, gas/diesel oil, ethane, feedstocks, gasoline-type
More informationSection III Macroeconomic environment
Data Tables Section III Macroeconomic environment 2.2: Data Tables Section III: Macroeconomic environment 422 3.01 Government budget balance General government budget balance as a percentage of GDP 2010
More informationP R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
More information9.01 ICT use for business-to-business transactions
9.01 ICT use for business-to-business transactions To what extent do businesses in your country use ICTs for communicating and carrying out transactions with other businesses? [1 = not at all; 7 = extensively]
More informationFLANGED METAL-SEATED NELDISC BUTTERFLY VALVES, SERIES L6
FLANGED METAL-SEATED NELDISC BTTERFLY VALVES, SERIES L6 2 L6 20 Issue 1/99 Bidirectional tight seat nique all metal seat design assures superior tightness in difficult applications over long time periods.
More informationPLANT KOREA. Contents
Contents 1. Company outline 3. Handling Items 1. Company outline is Trading company & Network between Korean company and Customer. Business Scope: plant equipment / materials business in Korea such as
More informationSFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability
SFC-FID ASTM System SFC-4000 Series SFC Performance Innovation Reliability The JASCO SFC-FID system has been developed as a simple and validated turn-key solution for the measurement of the two ASTM standard
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationKS Valves & Pumps. https://www.indiamart.com/ksvalves/
+91-8048602783 KS Valves & Pumps https://www.indiamart.com/ksvalves/ Under the Quality Management Surveillance of ISO 9001-2015 certification, Our organization is placed amongst the distinguished Manufacturers,
More informationwcshipping.com
Containarized Car Exports From the United States Data and Analysis 2nd Quarter 2015 Second Quarter 2015 - US Car Export Market Summary Despite ongoing port delays and the expensive US dollar, global interest
More informationVALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS.
VALVES FITTINGS & STAINLESS STEEL BALL VALVES CAMLOCKS SPECIFICATIONS: ALUMINUM, SS, BRASS, & D. I. GRAVITY CASTING A-A-59326 STANDARDS NBR SEAT MATERIAL 50 PSI TO 250 PSI SIZE 3/4 TO 8 TYPE B F COUPLER
More information