Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
|
|
|
- Gabriella Arlene Harrington
- 5 years ago
- Views:
Transcription
1 A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications in the power industry, in particular in feed water lines, steam lines, and in services which involve high temperatures media. Technical data Sizes: DN (NPS 2-24) Temperature ( C): -46 to +650 Pressure ratings: ASME Class 900, 1500 and 2500 Body materials: A216 WCB, A217 WC6, A217 WC9, A217 C12A Connections standards: Butt Welded according to ASME B16.25 Flanged Ends available upon request A range of compact pressure seal gate valves designed according to ASME B All range is offered in four standard cast materials: WCB (generally used on feed water lines), WC6 and WC9 (both used on steam lines), C12A (proposed for high temp. applications). End to end dimensions as per ASME B16.10 short pattern. Available in wedge gate and parallel slide configurations. Seats are welded in. Position indicator is offered as standard. Stellite gr. 6 overlay on seat and wedge or disc; Stellite gr. 21 overlay on backseat. Pressure seal gasket has trapezoidal shape for a low load on bolting, and is supplied in graphite with integral stainless steel antiextrusion protection. Standard ISO top mounting for easy assembly of any type of actuator or bevel gear. Available options: wedge vent hole or overpressure pipe, by-pass, limit switch in open or closed position. Valves are offered as standard with manual operators (Hand wheel or bevel gear depending on size). Actuated options such as electric, pneumatic or hydraulic are available. Emerson.com/FinalControl 2017 Emerson. All Rights Reserved. VCTDS EN 17/10
2 Wedge gate configuration Figure 1 Parallel slide configuration Figure 2 Sch. Sch. Figure 3 Figure 4 Figure 5 Notes 1. Fig. 4 is applicable for NPS 2 and 2½ only. 2. Fig. 5 is applicable for NPS 3 only. 3. Fig. 6 is applicable for NPS 4 to 24 (ASME cl. 900 and 1500) and for NPS 12 to 24 (ASME cl. 2500). 4. Fig. 7 is applicable for NPS 4 to 10 (ASME cl. 2500). Figure 6 Figure 7 2
3 Material specification Item Description Body mat.: WCB Body mat.: WC6 Body mat.: WC9 Body mat. C12A 1 Body A 216 WCB A 217 WC6 A 217 WC9 A217 C12A 2 Seat 1 A Stellite gr. 6 A 182 F22 + Stellite gr. 6 A 182 F22 + Stellite gr. 6 A182 F91/St 12 3 Wedge 2 (for wedge gate conf.) A 216 WCB + Stellite gr. 6 A 217 WC9 + Stellite gr. 6 A 217 WC9 + Stellite gr. 6 A217 C12A/St 6 3 Disc 2 (for parallel slide conf.) A Stellite gr. 6 A 182 F22 + Stellite gr. 6 A 182 F22 + Stellite gr. 6 A182 F91/St 6 4 Stem A 182 F6a Cl 2 A 565 gr 616HT A 565 gr 616HT A565 Gr 616HT 5 Gasket 316 reinforced graphite 316 reinforced graphite 316 reinforced graphite Graphite/316 6 Bonnet A Stellite gr. 21 A 182 F22 + Stellite gr. 21 A 182 F22 + Stellite gr. 21 A182 F91/St 21 8 Packing Graphite Graphite Graphite Graphite/Carbographite 9 Gland A 182 F6a Cl 2 A 182 F6a Cl 2 A 182 F6a Cl 2 A182 F6a Cl2 10 Gland flange A 516 gr 70 A 516 gr 70 A 516 gr 70 A240 Tp L 11 Body-yoke bolts A 193 B7 A 193 B7 A 193 B16 A193 B16 12 Body-yoke nuts A 194 2H A 194 2H A A194 Gr 4 15 Gland bolts A 193 B7 A 193 B7 A 193 B16 A193 B16 16 Gland nuts A 194 2H A 194 2H A A194 Gr 4 18 Lubricator Carbon steel Carbon steel Carbon steel Carbon steel 19 Yoke sleeve A 763 Gr A A 763 Gr A A 763 Gr A A763 Gr.A 21 Handwheel Carbon steel Carbon steel Carbon steel Carbon steel 22 Handwheel nut A 105 A 105 A 105 A Name plate Stainless steel Stainless steel Stainless steel Stainless steel 24 Yoke A 216 WCB A 216 WCB A 216 WCB A216 WCB 31 Bonnet screw A 193 B7 A 193 B16 A 193 B16 A193 B16 36 Bonnet retaining ring 3 A 105 A 182 F22 A 182 F22 A182 F22 37 Gland bolts flange 4 A 105 A 105 A 105 A Segment ring 5 A 182 F22 A 182 F22 A 182 F22 A182 F91 43 Intermedia thrust ring A 182 F22 A 182 F22 A 182 F22 A182 F6a Cl2 58 Position indicator A 105 A 105 A 105 A182 F6a Cl2 64 Split pin Stainless steel Stainless steel Stainless steel Stainless steel 99 Spring Inconel 718 Inconel 718 Inconel 718 UNS N Bearings housing A 105 A 105 A 105 A Coupling bolts A 193 B7 A 193 B7 A 193 B7 A193 Gr.B7 173 Coupling nuts A 194 2H A 194 2H A 194 2H A194 Gr.2H 242 Key Key steel Key steel Key steel Key steel 279 Bottom ring A 182 F6a Cl 2 A 182 F6a Cl 2 A 182 F6a Cl 2 A182 F6a Cl2 293 O-ring FKM 70 sh FKM 70 sh FKM 70 sh FKM70 sh 311 Retaining ring 6 A 105 A 105 A 105 A Two half ring 7 A 182 F6a Cl 2 A 182 F6a Cl 2 A 182 F6a Cl 2 A182 F6a Cl2 314 Anchor A 216 WCB A 217 WC9 A 217 WC9 A217 C12A 315 Stop ring A 182 F6a Cl 2 A 182 F6a Cl 2 A 182 F6a Cl 2 A182 F6a Cl2 316 Pin Stainless steel Stainless steel Stainless steel A182 F316-F316L 317 Ring A 105 A 105 A 105 A182 F6a Cl2 318 Nut A 194 2H A 194 2H A 194 2H A194 Gr Nut A A A A194 Gr Bushing A 182 F6a Cl 2 A 182 F6a Cl 2 A 182 F6a Cl 2 A182 F6a Cl2 325 Screw A 193 B8 A 193 B8 A 193 B8 A193 B8 Notes 1. Seats are welded in. 2. Flexible. 3. Applicable for NPS 2 and 2½ only (ASME class ). 4. Applicable for NPS 3 only (ASME class 900 and 1500); from NPS 2 to 10 (ASME class 2500). 6. Applicable for NPS 3 to 24 (ASME class 900 and 1500). 7. Applicable for NPS 3 (ASME class 900 and 1500); from NPS 2 to 10 (ASME class 2500). 3
4 G V M Hd H H1 L Dimensions and weights ASME class 900 Travel Weight Size NPS G M L Hd H H1 V V1 Z K X Top flange (n turns ± 1) Travel (mm) (bare shaft) F ½ F F F F F F F F F F F F Dimensions and weights ASME class 1500 Travel Weight Size NPS G M L Hd H H1 V V1 Z K X Top flange (n turns ± 1) Travel (mm) (bare shaft) F ½ F F F F F F F F F F F F Dimensions and weights ASME class 2500 Travel Weight Size NPS G M L Hd H H1 V V1 Z K X Top flange (n turns ± 1) Travel (mm) (bare shaft) F ½ F F F F F F F F F F F F
5 Standard ISO top mounting for easy assembly of any type of actuator or bevel gear Pressure seal gasket developed with trapezoidal shape in graphite with integral stainless steel anti extrusion protection, for a low load on bolting Backseats, for easy maintenance without interrupting production time Rising stem - provides unrestricted flow with the disc completely outside the flow path Integral T-head stem connection to the wedge - provides positive connection between stem and disc during all operating conditions. Wedge guiding in the body for all the valve stroke - to ensure alignment of the disc with the seats, avoiding scratch or incorrect positioning Renewable seats - for a simplified seats replacement Bi-directional, except for the one equipped with by-pass and/or over pressure pipe 5
6 900 RATING CLASS (ASME B16.34) ASTM ASME Pressure in bar at temperature C body material cast code B to WCB *** Std.* WCB *** Spec.** WC6 **** Std.* WC6 **** Spec.** WC9 ***** Std.* WC9 ***** Spec.** C12A Std.* C12A Spec.** RATING CLASS (ASME B16.34) ASTM ASME body material code cast B16.34 Pressure in bar at temperature C -29 to WCB *** Std.* WCB *** Spec.** WC6 **** Std.* WC6 **** Spec.** WC9 ***** Std.* WC9 ***** Spec.** C12A Std.* C12A Spec.** RATING CLASS (ASME B16.34) ASTM ASME Pressure in bar at temperature C body material cast code B to WCB *** Std.* WCB *** Spec.** WC6 **** Std.* WC6 **** Spec.** WC9 ***** Std.* WC9 ***** Spec.** C12A Std.* C12A Spec.** Note: * Standard Class according to ASME B16.34 ** Special Class according to ASME B16.34 *** WCB Upon exposure to temperatures above 425 C, the carbide phase of steel may be converted to graphite. Permissible but not recommended for prolonged usage above 425 C. **** WC6 Not to be used above 595 C. ***** WC9 Permissible but not recommended for prolonged usage above 595 C. Flow Coefficient C v for wedge Gate Valves ASME Class NPS DN ½ Flow Coefficient C v for Parallel Seat Gate Valves ASME Class NPS DN ½
7 Valve type Old code New uniqueness code Flexible VS900PSA 1S0E********* wedge VS1500PSA 1S0F********* VS2500PSA 1S0G********* Parallel VS900SPPSA 1P0E********* slide VS1500SPPSA 1P0F********* VS2500SPPSA 1P0G********* Coding guide Example 1S 0 E B3 H A Valve type 1S Gate - Flexible wedge 1P Gate - Parallel slide Valve configuration 0 Basic Valve rating E ASME 900 F ASME 1500 G ASME 2500 Nominal valve size ½ 03 3 KB 3"x2"x3" 04 4 KC 4"x3"x4" 06 6 K4 6"x4"x6" 08 8 KF 8"x6"x8" AH 10"x8"x10" AL 12"x10"x12" 14 14" AB 14"x12"x14" 16 16" AD 16"x14"x16" 18 18" AF 18"x16"x18" 20 20" BH 20"x18"x20" 22 22" BL 22"x20"x22" 24 24" BB 24"x22"x24" Body material 30 ASTM A216 WCB 31 ASTM A216 WCC 38 ASTM A217 C12A 44 ASTM A217 WC6 45 ASTM A217 WC9 Cladding 0 No cladding 2 Sealing gasket area F316 Trim B3 13% Cr. + 3 Stellite Pipe connection A Flanged per ASME B16.5 H Weld end ASME B16.25 J Weld end EN K Weld end ISO 9692 Standard valve operation A Handwheel B Bevel gear C Bare shaft (Coupling type A) E Bare shaft for linear actuator 7
8
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
Sempell Dewrance Check valves Bled steam
Features General application The Dewrance bled steam check valve has been designed specifically for use on power generation steam turbines for extraction and cold reheat applications where reliable non-return
DEWRANCE. Check Valve Bled Steam
Check Valve Bled Steam DEWRANCE Features & Benefits Excellent Reliability - Internal Counterweight to balance disc under low load conditions - Direct deposited seats - Tilting disc design for quick closing
Bolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
ECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
Fig. VC900PS Design: ASME B16.34
Gate Valves Class 900 DN 50-500 (2 20 ) Carbon, Alloy and Stainless Steel PDS JC-900PS Rev.3 Fig. 900PS Design: ASME B16.34 JC Fábrica de válvulas, s.a. E-Mail: jc@jc-valves.com Internet: www.jc-valves.com
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
GA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
TECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
PETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK
PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class
technical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
L&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
SEMPELL HIGH PRESSURE CHECK VALVE MODEL VR500 (ASME)
Designed for use in high temperature and high pressure systems wherever a reverse flow has to be avoided. FEATURES Piston type check valve Body made of forged steel Wear resistant stellite body seat Separated
GL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
Check Valves High Pressure Steel
heck Valves High Pressure Steel DEWRANE Features & Benefits Excellent Reliability - Direct deposited seats hard-faced with Stellite or Equivalent - Tilting Disc design balanced for quick opening and immediate
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
KE Series. Through Conduit, Double Expanding Gate Valves
KE Series Through Conduit, Double Expanding Gate Valves The KE Series is an advanced API 6D designed gate valve that provides a tight mechanically activated seal. It has double sealing, bi-directional
Large bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API
Large bore valves Powergeneration / petrochemical industries Medium & high-pressure valves in accordance with ASME, EN, BS and API An introduction to Key Valve Technologies Ltd. Key Valve Technologies
GATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
Gate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
Sempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
FORGED HIGH PRESSURE BONNETLESS. ASME CLASSES: Sizes: 1 2 4" ( mm) U.S. Patent # Patented Easy Maintenance!
FORGED HIGH PRESSURE BONNETLESS ASME CLASSES: 1690 4500 Sizes: 1 2 4" (15 100 mm) U.S. Patent # 4356832 Patented Easy Maintenance! PROFILE Velan is one of the world's leading manufacturers of industrial
Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600
ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
H i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
w w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.
A trusted name in industrial valve company FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.34 CATALOG NUMBER FFI -1004 TABLE OF CONTENTS
Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
Specially designed low-maintenance control valves for a wide range of applications in water circulation
SEMPELL Specially designed low-maintenance control valves for a wide range of applications in water circulation Features and benefits modular design the valve is suitable for continuous operation good
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED
SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED Metso's Neles series GU single seated, top guided globe valves are economical high-performance control valves designed to provide the best possible
Pressure Seal Valves PACIFIC VALVES
PCIFIC VLVES PCIFIC VLVES PRESSURE SEL By Subject Product Overview...4-6 Parallel Disc Gate Valve Features...7 Wedge Gate Valve Features...8 aterials of Construction, Gate Valves...9 Gate Valve Product
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
WENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
DSI Valves. Pressure Seal Carbon, Chrome and Alloy Gate, Globe and Check Valves. REQUEST A QUOTE SCHEDULE SERVICES
DSI Valves Pressure Seal Carbon, Chrome and Alloy Gate, Globe and Check Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM Z Y - T E C H G L O B A L I N D U S T R I
YARWAY HIGH PRESSURE GLOBE VALVE
In line repairable high pressure globe valve designed to provide maximum service life with minimum maintenance FEATURES GENERAL APPLICATION These valves have become the established stop valve in all modern
Please note this is a condensed catalog. For a complete version, contact Velan directly.
Please note this is a condensed catalog. For a complete version, contact Velan directly. VELAN VALVES IN POWER With an installed base covering over 300 nuclear power plants and over 2,000 thermal power
Through Conduit Gate Valves Slab & Expanding
Through Conduit Gate Valves Slab & Expanding Through Conduit Slab Gate valve Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized,
PACIFIC VALVES. Pressure Seal Valves
PCIFIC VLVES Pressure Seal Valves PCIFIC VLVES PRESSURE SEL By Subject Product Overview...2-4 Parallel Disc Gate Valve Features...5 Wedge Gate Valve Features...6 aterials of Construction, Gate Valves...7
Series 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
Gate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
ECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
UREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
Corporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves...
FORGED STEEL VALVES Table Of Contents Corporate Overview... 2,3 How To Order... 4-8 Gate Valves... 9-14 Globe Valves... 15-22 Check Valves... 23-30 Cryogenic Valves... 31-40 Integral Flanged Valves...
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
Forged Steel Valves Comparison Chart 1. Standard material Specification 2. Figure Number 3. Gate Valves 4-5. Globe Valves 6-7. Y-Globe Valves 8-9
INDEX Forged Steel Valves Comparison Chart 1 Standard material Specification 2 Figure Number 3 Threaded, Socket Welded & Butt Welded Ends Gate Valves 4-5 Globe Valves 6-7 Y-Globe Valves 8-9 Check Valves
BOLTED BONNET API 600
PACIFIC VALVES BOLTED BONNET API 600 By Subject Product Overview...2-4 Gate Valves Major Features...5 Gate Valves Optional Features...6 Materials of Construction: Gate Valves...7 Gate Valves Product Line...8-10
PRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
General Index Range and Index...1 Figure Numbering...2 Materials...3-4 Pressure Testing...5 Installation, Marking and Identification...6-7 Desgin Features...8-9 Stress Analysis to the body...10 Components
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
Series A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)
Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com
Gate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
Type Pneumatic Control Valve Type 3525 Globe Valve
Type 355-1 Pneumatic Control Valve Type 355 Globe Valve Application Dump valve designed for use in high-pressure on/off applications in upstream oil and gas production. Valve size NPS 1 to 3 Pressure rating
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB0400-00 1 TABLE OF CONTENTS PAGE Theory of Operation.. 3 General Ordering Information 4 Torque values ASME Cl. 150. 5 Torque values
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
YARWAY THROTTLING VALVES HY-DROP MODEL 5817/ 5827
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. 5817- ASME class 1700 5827- ASME class 2700 FEATURES GENERAL APPLICATION The Hy-Drop throttling
Proven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
TECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* BASIC CONFIGURATION
* BASIC CONFIGURATION With a robust integral-to-body valve seat and optimized seating angles, this valve is capable of handling isolation and process control through multiple functionalities FEATURES GENERAL
AKG-A/AKGS-A Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
Series A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Carbon Steel Valves...1 Standard Product Range...2 Standard
SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED
SERIES GB CONTROL VALVES GLOBE-CAGE BALANCED, CAGE GUIDED Metso's Neles series GB cage guided, balanced trim globe valves are economical high performance control valves designed to provide the best possible
Designed to provide maximum service life with minimum maintenance.
Designed to provide maximum service life with minimum maintenance. Fastest In-Line Repair Repairable in-line more easily and at less cost than any other valve. Stem, disc, and packing can be quickly removed
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves
Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe