Pipeline Systems PIP PLSMV008 Carbon Steel Plug Valve Descriptions

Size: px

Start display at page:

Download "Pipeline Systems PIP PLSMV008 Carbon Steel Plug Valve Descriptions"

Blanche Kelley
5 years ago
Views:

1 October 2017 Pipeline Systems PIP PLSMV008 Carbon Steel Plug Valve Descriptions

2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY October 2017 Issued Not printed with State funds

3 October 2017 Pipeline Systems Table of Contents PIP PLSMV008 Carbon Steel Plug Valve Descriptions 1. Scope References Process Industry Practices Cross Reference Valve Descriptions Valve Designation System Notes... 2 Process Industry Practices Page 1 of 14

4 1. Scope This Practice provides requirements for suppliers providing carbon steel plug valves included in PIP Pipeline Systems Line Class Material Specifications. 2. References Applicable parts of the following Practice shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles will be used herein where appropriate. 2.1 Process Industry Practices (PIP) PIP PLCM0004 Pipeline Systems Valve Commodity Codes Designator System 3. Valve Designation System 4. Notes 3.1 For a full explanation of the format used to structure the valve numbers listed within this Practice, refer to PIP PLCM This Practice provides descriptions for two types of plug valves. Therefore, the first two characters following the Pipeline Systems identifier, L, in the valve numbers are PE or PL. 3.3 The valves listed in Section 5 and Section 6 of this Practice are sorted by the unique valve number designation in ascending alphanumeric sequence (e.g., LPE01CB500, LPE01CB501, LPE03CB500, LPL01CB500, LPL01CB501, LPL03CB500, LPL03CB501). 4.1 Occasionally, valve size ranges listed in this Practice are broader than the size ranges shown for the same valves on a given piping line class specification. While the most common practice has been used to specify valve size ranges on line class specifications, a purchaser may need to utilize a valve in a size outside this common practice choice. Thus, for reference purposes, the full size range for which a given valve is typically manufactured is shown in this Practice. 4.2 Gear operation may be specified in two ways: (a) Select the description in which the gear operator is already called out, or (b) Select the description in which a handwheel has been called out, and use Field 5 of the Valve Commodity Codes Designator System as described in PIP PLCM Many plug valve manufacturers offer numerous handle options (e.g., locking/nonlocking, latching/nonlatching, lever, wrench, tee). As a default, NPS 3 and smaller valve descriptions within this Practice specify a high hub lever with lockout. The purchaser shall specify a different handle option if one is required. 4.4 If fluids can be trapped (e.g., in double-seated valves) and subject to heating and subsequent expansion, means of pressure relief shall be considered to avoid excessive pressure build-up. Process Industry Practices Page 2 of 14

5 4.5 Because of current practice at many pipeline facilities, only NACE-compliant valves are specified. These valves are technically acceptable for both sweet and sour services. For use of non-nace-compliant valves or for applications involving severe sour and corrosive services, engineering review is required. 4.6 Pressure and temperature rating can be limited by certain components (e.g. soft seats and seals) permitted by this Practice. Manufacturers recommended pressure-temperature restrictions shall be consulted. 4.7 It is common pipeline practice to inject inhibitors and other chemicals for corrosion control. The manufacturer shall be consulted on the suitability of service under these conditions for all components (including soft seats and seals) permitted by this Practice. 5. Cross Reference Valve Number LPE01CB500 LPE01CB501 LPE03CB500 LPE03CB501 LPE06CB500 LPE06CB501 LPE09CB500 LPE15CB500 LPL01CB500 LPL01CB500 LPL01CB500 LPL03CB500 LPL03CB500 LPL03CB500 LPL03CB500 LPL06CB500 LPL06CB500 LPL06CB500 LPL09CB500 LPL09CB500 LPL15CB500 LPL15CB500 Applicable Line Classes (PLX-) 1CS5S01 1CS5S01 3CS5S01 3CS5S01 6CS5S01 6CS5S01 9CS5S01 15CS5S01 1CS5S01 1CS5S01 1CS5S01 3CS5S01 3CS5S01 3CS5S01 3CS5S01 6CS5S01 6CS5S01 6CS5S01 9CS5S01 9CS5S01 15CS5S01 15CS5S01 Process Industry Practices Page 3 of 14

6 6. Valve Descriptions Description of PLUG Valve (LPE01CB500): Type:... PLUG Design Type:... Expanding Valve Size:... NPS 2 -to- NPS 8 Class: Ends:... FLANGED RF Body:... CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:... MFG STD Slip inserts and body seals: VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:... MFG STD Operation:... HANDWHEEL Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting... BOLTS: ASTM A193 B7M DESIGN - API 599 or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL CERTIFICATION - - API 6D (gate valves) ANSI/NACE MR0175/ISO Description of PLUG Valve (LPE01CB501): Type:...PLUG Design Type:... Expanding Valve Size:... NPS 10 -to- NPS 24 Class: Ends:...FLANGED RF Body:...CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:...MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:...MFG STD Operation:...GEAR Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M DESIGN - API 599 or ASME B16.34 as applicable TESTING - MFG STD Process Industry Practices Page 4 of 14

7 Description of PLUG Valve (LPE03CB500): Type:... PLUG Design Type:... Expanding Valve Size:... NPS 2 -to- NPS 6 Service:... Sour Service (NACE) Class: Ends:... FLANGED RF Body:... CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:... MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:... MFG STD Operation:... HANDWHEEL Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL CERTIFICATION - - API 6D (gate valves) ANSI/NACE MR0175/ISO Description of PLUG Valve (LPE03CB501): Type:...PLUG Design Type:... Expanding Valve Size:... NPS 8 -to- NPS 24 Service:... Sour Service (NACE) Class: Ends:...FLANGED RF Body:...CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:...MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:...MFG STD Operation:...GEAR Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL - API 6D (gate valves) Process Industry Practices Page 5 of 14

8 Description of PLUG Valve (LPE06CB500): Type:...PLUG Design Type:... Expanding Valve Size:... NPS 2 -to- NPS 4 Service:... Sour Service (NACE) Class: Ends:...FLANGED RF Body:...CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:...MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:...MFG STD Operation:...HANDWHEEL Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL - API 6D (gate valves) Description of PLUG Valve (LPE06CB501): Type:...PLUG Design Type:... Expanding Valve Size:... NPS 6 -to- NPS 24 Service:... Sour Service (NACE) Class: Ends:...FLANGED RF Body:...CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:...MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:...MFG STD Operation:...GEAR Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL - API 6D (gate valves) Process Industry Practices Page 6 of 14

9 Description of PLUG Valve (LPE09CB500): Type:...PLUG Design Type:... Expanding Valve Size:... NPS 2 -to- NPS 10 Service:.... Sour Service (NACE) Class: Ends:...FLANGED RF Body:...CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:...MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:....MFG STD Operation:...GEAR Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL - API 6D (gate valves) Description of PLUG Valve (LPE15CB500): Type:...PLUG Design Type:... Expanding Valve Size:... NPS 2 -to- NPS 3 Service:... Sour Service (NACE) Class: Ends:...FLANGED RF Body:...CS (ASTM A216 WCB or - WCC) with 3 mils ENP Bonnet:... CS (ASTM A WCB or - WCC or ASTM A36) Plug:... CS (ASTM A216 - WCB or - WCC) or DI (ASTM A or ASTM A ) with 3 mils ENP Slips:...MFG STD Slip inserts and body seals VITON Design (Other):... FIRE TESTED API 6FA or API 607, THERMAL RELIEF TO UPSTREAM SIDE Bore-Port:...MFG STD Operation:...GEAR Gaskets:... MFG STD Stem-Packing:... PTFE/Graphite Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M or ASME B16.34 as applicable TESTING - MFG STD DIMENSIONAL - API 6D (gate valves) Process Industry Practices Page 7 of 14

10 Description of PLUG Valve (LPL01CB500): Type:...PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 1-1/2 -to- NPS 4 Service:... Sour Service (NACE) Class: Ends:...FLANGED RF Pattern:.... SHORT Body:... CS (ASTM A105N or A216 - WCB) Plug:...SS 410 WITH LOW FRICTION COATING Stem:...SS 410 WITH LOW FRICTION COATING Design (Other):...FIRE TESTED API 6FA OR 607 Bore-Port:...REGULAR - API 599 Operation:...LEVER Stem Seals:...GRAPHITE Stem-Packing:...GRAPHITE Body-Bonnet Bolting:...BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Description of PLUG Valve (LPL01CB501): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 6 -to- NPS 10 Service:... Sour Service (NACE) Class: Ends:... FLANGED RF Pattern:... REGULAR Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - CERTIFICATION - API 599 ANSI/NACE MR0175/ISO Process Industry Practices Page 8 of 14

11 Description of PLUG Valve (LPL01CB502) Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 12-to- NPS 24 Service:... Sour Service (NACE) Class: Ends:... FLANGED RF Pattern:... VENTURI Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - CERTIFICATION - API 599 ANSI/NACE MR0175/ISO Description of PLUG Valve (LPL03CB500): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 1-1/2 -to- NPS 3 Service:... Sour Service (NACE) Class: Ends:... FLANGED RF Pattern:... SHORT Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... LEVER Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - CERTIFICATION - API 599 ANSI/NACE MR0175/ISO Process Industry Practices Page 9 of 14

12 Description of PLUG Valve (LPL03CB501): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 4 Service:... Sour Service (NACE) Class: Ends:... FLANGED RF Pattern:... SHORT Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - CERTIFICATION - API 599 ANSI/NACE MR0175/ISO Description of PLUG Valve (LPL03CB502): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 6 -to- NPS 10 Service:... Sour Service (NACE) Class: Pattern:... REGULAR Ends:... FLANGED RF Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - CERTIFICATION - API 599 ANSI/NACE MR0175/ISO Process Industry Practices Page 10 of 14

13 Description of PLUG Valve (LPL03CB503): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 12 -to- NPS 24 Service:... Class:... Pattern:... Ends:... Body:... Plug:... Stem:... Sour Service (NACE) 300 VENTURI FLANGED RF CS (ASTM A105N or A216 - WCB) SS 410 WITH LOW FRICTION COATING SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL CERTIFICATION - - API 599 ANSI/NACE MR0175/ISO Description of PLUG Valve (LPL06CB500): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 1-1/2 -to- NPS 3 Class: Ends:... FLANGED RF Pattern:... REGULAR Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... LEVER Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Process Industry Practices Page 11 of 14

14 Description of PLUG Valve (LPL06CB501): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 4 -to- NPS 10 Class: Pattern:... REGULAR Ends:... FLANGED RF Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Description of PLUG Valve (LPL06CB502): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 12 -to- NPS 24 Class: Pattern:... VENTURI Ends:... FLANGED RF Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Process Industry Practices Page 12 of 14

15 Description of PLUG Valve (LPL09CB500): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 2 -to- NPS 10 Class: Ends:... FLANGED RF Pattern:... REGULAR Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Description of PLUG Valve (LPL09CB501): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 12 -to- NPS 24 Class: Ends:... FLANGED RF Pattern:... VENTURI Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Process Industry Practices Page 13 of 14

16 Description of PLUG Valve (LPL15CB500): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 2 -to- NPS 10 Class: Ends:... FLANGED RF Pattern:... REGULAR Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Description of PLUG Valve (LPL15CB501): Type:... PLUG Design Type:... LUBRICATED, INVERTED, PRESSURE BALANCED Valve Size:... NPS 12 -to- NPS 24 Class: Ends:... FLANGED RF Pattern:... VENTURI Body:... CS (ASTM A105N or A216 - WCB) Plug:... SS 410 WITH LOW FRICTION COATING Stem:... SS 410 WITH LOW FRICTION COATING Design (Other):... FIRE TESTED API 6FA OR 607 Bore-Port:... REGULAR - API 599 Operation:... GEAR Stem Seals:... GRAPHITE Stem-Packing:... GRAPHITE Body-Bonnet Bolting:... BOLTS: ASTM A193 B7M DIMENSIONAL - API 599 Process Industry Practices Page 14 of 14

PIP PNSMV007 Carbon Steel Butterfly Valve Descriptions

October 2017 Piping PIP PNSMV007 Carbon Steel Butterfly Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice