Through Conduit Gate Valves Slab & Expanding

Size: px
Start display at page:

Download "Through Conduit Gate Valves Slab & Expanding"

Transcription

1 Through Conduit Gate Valves Slab & Expanding

2 Through Conduit Slab Gate valve Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized, for a bubble tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and automatic relief of excess body pressure are a standard feature of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of the same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage. Through Conduit Slab Gate valve Features Negligible Pressure Drop Self Relieving Double Block and Bleed performances Equalized Bore (as required/operated) Possibility of reverse acting and equalized bore for fail closed operation Double seal upstream by piston effect, down-stream with floating obturator Superior Seal Performances (Bubble Tight) Suitable for all types of fluids (including abrasive fluids) TYPICAL ADVANTAGES Suitable for ESDV/BDV applications and Pig Traps Extremely flexible actuation with or without stem ejection assistance Robust Construction Full In-Line maintainability Fire Safe construction PRODUCTION RANGE Slab Gate Valves are available in sizes and pressure ratings as follows: Class 150# from 2 through 64 Class 300# from 2 through 64 Class 600# from 2 through 64 Class 900# from 2 through 48 Class 1500# from 2 through 42 Class 2500# from 2 through 24 APPLICABLE STANDARDS APPLICABLE STANDARDS Slab Gate valves comply with API 6D / API 6D SS and all relevant international codes: ASME B16.34 ASME B16.25 ASME B16.47 Nace MR01.75 ASME VIII Div. 1 FEATURES Stem/Stem seal The stem is designed with a threaded-in T bar allowing relative motions of the gate under line pressure. The stem seal uses braided graphite gaskets ensure sealing integrity. Stem sealant injection system is achieved through a port located on the bonnet. In case of leakage through the stem seal it is possible to inject the sealant through the stem packing release valve. VALVE MATERIALS Slab Gate valves are manufactured using a wide range of materials, from carbon steel to alloys. A typical material selection is as follows: Service Body Bonnet Trim Seat Insert General non corrosive Moderate corrosive Low temperature A216 WCB A216 WCB A352 LCC A105 A105 LF2 A105 + ENP F6A LF2 + ENP Nylon/RPTFE Nylon/RPTFE Nylon/RPTFE Seat Seats are ENP coated and are provided with thermoplastic soft insert on their face. A double face seal effect is obtained due to metallic contact between the seat and the gate, thus increasing the reliability of the valve. Metal-to-metal seating is available for abrasive service. In such case gate and seat faces are coated with HVOF Tungsten Carbide coating. Fig. 1 Seat detail Fig. 2 Stem injection detail

3 Through Conduit Slab Gate valve Through Conduit Slab Gate valve Seats are shown during double seal action Valbart s Through Conduit Slab Gate Valves offer increased value by incorporating advanced design features Seats are shown with upstream seat in self relieving action UPSTREAM SIDE DOWNSTREAM SIDE Fire-safe design Valbart Through Conduit Slab Gate valve is available in the API 6FA fire-tested design. Fire-tests have been witnessed and certified by independent authorities. Valbart Fire tested gate valves offer the highest resistance against fire. The body seal is a spiral wound graphite/aisi 316 gasket and the stem seal is a die-formed/braided graphite packing. The stem incorporates the back seat feature to allow stem seal re-packing with valve in service. Fire-tests certification is available and can be provided upon request. Easy maintenance Valbart Srl Through Conduit Slab Gate valve design minimizes and eases the maintenance allowing for the service operations to be done without the removal of the valve from the line. Double Block and Bleed Double block and bleed capability and automatic relief of excess body pressure are standard features of Valbart Through Conduit Slab Gate Valves. With the valve fully closed and pressure on both sides, it is possible to bleed the pressure from the body cavity to check seat seal integrity and to achieve double isolation between the two sides and avoid any risk of product contamination Single piston effect seats Seats rings are floating type and are energized against the gate by means of helical springs. The initial seating is enough to assure sealing between gate and upstream seat when the line pressure is applied. The gate allows axial movement and the upstream force derived from line pressure force the gate against the downstream seat creating a double, bubble tight barrier. Additional features (Available on request) Self relieving features The single piston design with the possibility of both seats and gate to float, permits the automatic release of any overpressure in the body cavity. Consequently, the seat rings are self-relieving. Fully piggable Valbart Through Conduit Slab Gate Valves are designed to be Fully Piggable. Pigs and scrapers can be run through the valve without any damage to the internal structure of the valve. Metal seated/tungsten Carbide coating for abrasive fluids Stem extension for buried service/high temperature service Inconel 625 cladding of the sealing surfaces for corrosive service CRA alloys for very corrosive media (Duplex,UNS S31254,UNS S34565) Seat Sealant Injection system for Emergency Sealing Transition Pipe Pups welded to the valve ends Position indicator Actuation (Electric, Pneumatic and Hydraulic actuators)

4 Through Conduit Double Expanding Gate valve PRODUCTION RANGE Slab Gate Valves are available in sizes and pressure ratings as follows: Class 150# from 2 through 64 Class 300# from 2 through 64 Class 600# from 2 through 64 Class 900# from 2 through 48 Class 1500# from 2 through 42 Class 2500# from 2 through 24 VALVE MATERIALS Offshore/Onshore applications Double block and bleed applications Sub-sea applications Scrapers/Pig Traps/Pig Launchers and Receivers Valbart Srl Through Conduit Double Expanding Gate Valves are manufactured with a full bore port and with 2-piece (gate + segment) obturator designed for a positive, bubble tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and high robustness are standard feature of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage. APPLICABLE STANDARDS Slab Gate valves comply with API 6D / API 6D SS and all relevant international codes: ASME B16.34 ASME B16.25 ASME B16.47 Nace MR01.75 ASME VIII Div.1 Valbart Srl Through Conduit Double Expanding Gate valves are manufactured using a wide range of materials, from carbon steel to alloys, in order to comply with all the possible services (Hydrocarbons, Mildly to Highly Corrosive, NACE, etcetera) and applications.ns, Mildly to Highly Corrosive, NACE, etcetera) and applications. MAIN APPLICATIONS Oil and gas production/transportation isolation Upstream gas compressor isolation Critical and Primary isolation Through Conduit Double Expanding Gate valve Principle of operation The Through Conduit Double Expanding Gate Valve comprises of a two piece wedged shape assembly consisting of a Gate and a Segment. The Gate is attached and driven by the stem and a centralizer helps in retaining the Gate-Segment assembly until sealing through expansion is required. Positive sealing is achieved in both high and low pressure conditions by expanding the Gate and the Segment out towards the seats while in a closed position. Gate in fully open position In a fully open position, the Segment is incapable of further upward movement and the Gate slides upwards along the wedge angle of the Segment, expanding both the Gate and the Segment. The centralizer mechanism allows the Gate-Segment assembly to expand against the seats and protect the seat faces from the line flow. Gate in running position In the running position, the centralizer holds the assembly together, preventing relative movement between the Gate and Segment and holding them in a neutral position until sealing expansion is required Gate in fully closed position With the Segment incapable of further downward movement, simultaneous upstream and downstream sealing is achieved when the centralizer mechanism allows the Gate-Segment to expand, sealing against both seats.

5 Through Conduit Double Expanding Gate valve Design features Positive Sealing (Capability of improving seal tightness by increasing the stem thrust) Through Conduit - Negligible Pressure Drop Double Block and Bleed performances Double seal (both up and downstream seats contribute to guarantee tight seal) Bi-Directional (with preferred flow direction) Full In-Line maintainability Suitable for all types of fluids Superior life of seat sealing surface (metal/non-sliding seats) TYPICAL ADVANTAGES Particularly indicated for Pig Traps isolation Extremely wide range of operating pressure and temperatures Extremely robust construction Intrinsically Fire Safe construction Through Conduit Double Expanding Gate valve Fire-safe design Valbart Through Conduit Expanding Gate valve is available in the API 6FA fire-tested design. Fire-tests have been witnessed and certified by independent authorities. Valbart Fire tested gate valves offer the highest resistance against fire. The body seal is a spiral wound gasket or Ring Joint / BX depending on the valve service and rating, and the stem seal is a die/formed /braided graphite packing. Fire-tests certification is available and can be provided upon request. Double block & bleed Double block and bleed capability is a standard feature of Valbart Through Conduit Expanding Gate Valves. With the valve fully closed and pressure on both sides, it is possible to bleed the pressure from the body cavity to check seat seal integrity. MAIN FEATURES Seats Seats are Tungsten Carbide HVOF (High Velocity Oxy Fuel) coated with Metal to Metal contact between seats and gate. Seat faces protected from emersion The seat faces are outside the flow stream and protected from the erosive action of the flow Stem/stem seal The stem is designed with a threaded T bar allowing relative motions of the gate under line pressure. The stem seal uses graphite seals to insure sealing integrity. Upon request a Chevron packing is available. The stem seal is provided with a lantern ring, and may be provided with secondary injection fitting and stem packing release valve (optional features). Double isolation This feature is obtained since the valve sealing is granted not only by the line pressure but also by the external force used to close the valve ( i.e. positive sealing) Fully piggable Valbart Srl Through Conduit Expanding Gate are designed to be Fully Piggable. Pigs and scrapers can be run through the valve without any damage to the internal structure of the valve Easy maintenace Valbart Srl Through Conduit Expanding Gate valve design minimizes and eases the maintenance allowing for the service operations to be done without the removal of the valve from the line.

6 RELATED PRODUCTS Double block and bleed valves Available in the following size # - 600# 900# # # * Larger size available upon request Rising Stem Friction Free Ball Valves BODY BALL STEM SEAT STANDARD MATERIAL LIST ASTM A105N/ASTM A216 WCB ASTM A182 F316/ASTM A351 CF8M ASTM A352 LCC/ASTM 350 LF2 ASTM A105N + STELLITE 6 ASTM A182 F316 + STELLITE 6 ASTM A352 LCC/ASTM 350 LF2 + STELLITE 6 ASTM A536 TP630 ASTM A105N + STELLITE 6 ASTM A182F316 + STELLITE 6 ASTM 350 LF2 + STELLITE 6 * Other materials are available upon request RELATED PRODUCTS The Double Block and Bleed Isolation Philosophy requires two in-line isolation valves and a bleed valve, used to drain or vent trapped fluid between the two closure elements in order to safely isolate safely the downstream pipe. This feature can be achieved with one single valves c/w a bleed port between the obturators. MAIN APPLICATIONS ADVANTAGES CHARACTERISTICS MAIN APPLICATIONS FEATURES Offshore oil & gas production Gas & oil terminals Chemical & Petrochemical Refining Fiscal Metering Skid Manufacturing LNG gas carrier Process/ Power industry contractors Space and weight saving Cost saving (product & installation) Minimized leak paths Increased line structural integrity ESDV+MOV or ESDV+XV configurations Increasesd reliability of the system Anti blow out/low emission stems Fire safe & anti-static design Independent ball and stem Self aligning trims Self relieving/ Double piston effect floating seats Soft or metal seated Design is available in side entry, (bolted, welded body) and for onshore, offshore (top side) or sub-sea configurations. Bleed/Vent system can be provided with Globe, Gate or Ball valves as per customers requirement. Molecular Sieve frequent cycling Isomerisation Thermal (hot) Oil Critical Services with Bellow Seal construction High temperature Low (Cryogenic) Off shore (produced water) Low maintenance due to full friction free opening and closing, excellent for frequent cycling Linear stem operation, no rotating, excellent for linear operation/actuation Standard with STELLITE6 ball and seat sealing area Extended life time due to selection of high quality materials against wear and corrosion Presence of Backseat enables stem packing to be renewed when valve is under pressure and in fully open position Gland packing design with normal gland flange and follower (no lubricated seal) for easy adjusting of stem packing without special tools Heavy wall thickness (in excess of ANSI B16.34 wall thickness) as per API 600/API 6D for extra corrosion allowance Seat tightness up to Class VI and ZERO leak through special lapping techniques Top entry design for in line inspection and/or maintenance

7 For Information on Valbart Specialized valves, please refer to the following leaflets: 2011 Valbart Srl - All Rights Reserved. - VBENBR1007 Via delle Industrie, 9/ Mezzago (MB) ITALY valbartsales@flowserve.com Phone: Fax:

Slab & Double Expanding Gate Valves

Slab & Double Expanding Gate Valves Slab & Double Expanding Gate Valves Double Expanding Characteristics The main feature of a double expanding gate valve is the 2 pieces obturator that guarantees a simultaneous mechanical seal both in the

More information

VELAN TRUNNION-MOUNTED

VELAN TRUNNION-MOUNTED VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,

More information

THROUGH CONDUIT VALVES TECHNICAL CATALOGUE

THROUGH CONDUIT VALVES TECHNICAL CATALOGUE SITINDUSTRIE VALVO VALVES THROUGH CONDUIT VALVES Ed. 01/DIC-2004 SITINDUSTRIE reserves the right to change, without notice, 1/14 SITINDUSTRIE TRIE VALVE DIVISION We are pleased to introduce you to the

More information

RAM Company USA Products Line

RAM Company USA Products Line RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON

More information

KE Series. Through Conduit, Double Expanding Gate Valves

KE Series. Through Conduit, Double Expanding Gate Valves KE Series Through Conduit, Double Expanding Gate Valves The KE Series is an advanced API 6D designed gate valve that provides a tight mechanically activated seal. It has double sealing, bi-directional

More information

TECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16)

TECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16) Valbart TM Through conduit slab gate valve TECHNICAL BULLETIN FCD VBENTB1013-01-A4 - (9/16) Experience in Motion Valbart Through Conduit Slab Gate Valve The Valbart TCSGV is a fabricated body through conduit

More information

PBV s Engineering Excellence At Work

PBV s Engineering Excellence At Work PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves

More information

The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.

The bolted bonnet configuration achieves simultaneously the best performance and the highest safety. The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always

More information

Contents. Dimensions and weights

Contents. Dimensions and weights G4N Gate Valves Through-conduit, double block-and-bleed slab gate valves with fully protected seat faces for long-lasting, drop-tight shutoff in liquid pipelines Contents General information 3 Standard

More information

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE.

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE. API 6D Expanding/ Slab Gate Valves ANSI 150-300-600-900-1500 SERIES 2-36 EXPG SBG > Control > Flow Quality > lit API 6D EXPANDING/ SLAB GATE VALVES Providing Hundreds of Products. Supporting Thousands

More information

Engineered Valves For Pipeline Service Application

Engineered Valves For Pipeline Service Application Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru

More information

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes

More information

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 2 GWC ITALIA Proven technology for individual valve solutions

More information

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide

More information

TECHNICAL BULLETIN. Valbart TCSGV. Through Conduit Slab Gate Valve. Experience In Motion

TECHNICAL BULLETIN. Valbart TCSGV. Through Conduit Slab Gate Valve. Experience In Motion TECHNICAL BULLETIN Valbart TCSGV Through Conduit Slab Gate Valve Experience In Motion Tight shutoff in liquid or gas services The Valbart TCSGV through conduit slab gate valve is manufactured and tested

More information

PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured

PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,

More information

Lined Valves for High-corrosion and Heavy Capacity. Electronic Data Testing Centre For High Pressure Oil Gas Seal 15000PSI XMAS TREE UP DOWN TOP

Lined Valves for High-corrosion and Heavy Capacity. Electronic Data Testing Centre For High Pressure Oil Gas Seal 15000PSI XMAS TREE UP DOWN TOP Lined Valves for High-corrosion and Heavy Capacity 15000PSI XMAS TREE Electronic Data Testing Centre For High Pressure Oil Gas Seal MSP/DRILEX (China) Inc. INTRODUCTION WB Ball Valves ZN Choke Valves (Needle

More information

Introduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...

Introduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range... CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...

More information

Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features

Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

TM SERIES Engineered Valves For Pipeline Service Application

TM SERIES Engineered Valves For Pipeline Service Application Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt

More information

HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL

HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal

More information

9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves

9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft

More information

Fully Welded Ball Valves

Fully Welded Ball Valves Fully Welded Ball Valves API6D & API6D SS COMPANY PROFILE: Established: 1956, Family Owned and Operated Managing Director: Thomas Böhmer PhD Eng. (Dr. Ing.-Germany) Employees: 270 Annual Sales: Facilities:

More information

GROVE B4, B5 and B7 Side-entry Ball Valves

GROVE B4, B5 and B7 Side-entry Ball Valves GROVE B4, B5 and B7 Side-entry Ball Valves Table of Contents GROVE B4, B5 and B7 SIDE-ENTRY BALL VALVES Features and Benefits Applications...1 GROVE B4 Design Features...2 Materials Specifications...4

More information

E N G I N E E R E D V A L V E S. B4, B5 & B7 Side Entry Ball Valves GROVE

E N G I N E E R E D V A L V E S. B4, B5 & B7 Side Entry Ball Valves GROVE B4, B5 & B7 Side Entry Ball Valves TABLE OF CONTENTS B4 B5 B7 SIDE ENTRY BALL VALVE FEATURES AND BENEFITS General Information 1 B4 Design Features 2 & 3 Valve Assembly and Cross Section 4 Dimensions and

More information

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600 The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and

More information

GWC Valve International

GWC Valve International GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D THROUGH CONDUIT SLAB & PARALLEL 21 EXPANDING GATE VALVES Pressure Class: 150 2,500 Size Range: 2 48 CATAL OG NU

More information

DOV VALVE. fire-safe The DOV valve is inherently fire-safe and has been tested and passed the latest ISO and API 607 requirements.

DOV VALVE. fire-safe The DOV valve is inherently fire-safe and has been tested and passed the latest ISO and API 607 requirements. DOV Valve INTRODUCTION The Double Offset Valve (DOV) is an advanced design that incorporates the positive features of ball, gate, plug and high performance valves. The DOV valve is a quarter turn, mechanically

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

The Solution For The Valve Problems Plug Valves

The Solution For The Valve Problems Plug Valves www.3zvalve.com The Solution For The Valve Problems Plug Valves CONTENTS The Solution For The Valve Problems Plug Valves DBB Group Double Block & Bleed Valves 5 Soft Seated Group Sleeved Valves 23 Lined

More information

Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.

Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as

More information

International Standard Valve, Inc. Slab and Expanding Gate Valves

International Standard Valve, Inc. Slab and Expanding Gate Valves International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc. DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com

More information

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves

More information

TRUNNION MOUNTED METAL SEATED BALL VALVES

TRUNNION MOUNTED METAL SEATED BALL VALVES TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion

More information

BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404

BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404 BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404 BONETTI Fully Welded trunnion ball valves The best solution to avoid fugitive emission in gas or underground applications The BONETTI s fully

More information

Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600

Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600 ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300

More information

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF

More information

NELES TRUNNION MOUNTED BALL VALVE SERIES D

NELES TRUNNION MOUNTED BALL VALVE SERIES D NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience

More information

MV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840

MV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840 MV1 Cert. No. 224939 License No. 6D-0840 0062 Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer INTRODUCTION MIR VALVE Sdn. Bhd. (MIR VALVE) was incorporated on 27 December, 2006, obtained

More information

BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404

BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404 BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404 BONETTI Fully Welded trunnion ball valves The best solution to avoid fugitive emissions in gas or underground applications The BONETTI s fully

More information

HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL

HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy

More information

Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.

Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications. 7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on

More information

Pig Valves. Complete Solutions for Industrial Valves NEWAY VALVE

Pig Valves. Complete Solutions for Industrial Valves NEWAY VALVE Pig Valves Pig Valves Complete Solutions for Industrial Valves NEWAY VALVE Cat.no.:E-PV-2005 Introduction 1 Quality Commitment 2 How to Order 3 4 ~ 5 Product Introduction Material Specifications Complete

More information

CLASS 150 & 300 REDUCED BORE BALL VALVES

CLASS 150 & 300 REDUCED BORE BALL VALVES CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API

More information

Design & Technology in Valves

Design & Technology in Valves Design & Technology in Valves Ibor has been involved in many large international projects with the world s leading EPC Company overview Ibor manufacture Ball valves, Butterfly valves, Gate Valves, Check

More information

HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL

HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal

More information

Forged 3 Piece Trunnion Mounted Ball Valves Series PL

Forged 3 Piece Trunnion Mounted Ball Valves Series PL Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece

More information

Expanding & Slab Gate Valves

Expanding & Slab Gate Valves Global Energy Market Solutions CAST / FORGED BODY Expanding & Slab Gate Valves For oil and natural gas wellhead, flowline, manifold, fracture or other critical service applications requiring operating

More information

MAGNUM GATE VALVES. Invention, Unique Design & Extraordinary Craftsmanship. WORLDWIDE OILFIELD MACHINE Est. 1980

MAGNUM GATE VALVES. Invention, Unique Design & Extraordinary Craftsmanship.   WORLDWIDE OILFIELD MACHINE Est. 1980 TM MAGNUM GATE VALVES www.womusa.com Invention, Unique Design & Extraordinary Craftsmanship WORLDWIDE OILFIELD MACHINE Est. 980 Table of Contents Patented Dual-Seal Technology Magnum Gate Valve 2 Magnum

More information

GALLI&CASSINA. Plug Valves. Conical

GALLI&CASSINA. Plug Valves. Conical Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure

More information

Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.

Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as

More information

Three Piece Forged Trunnion Mounted Ball Valve

Three Piece Forged Trunnion Mounted Ball Valve International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded

More information

YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000

YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000 Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating

More information

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications

More information

MV13 THROUGH-CONDUIT GATE VALVE (FORGED BODY)

MV13 THROUGH-CONDUIT GATE VALVE (FORGED BODY) I one brand infinite trust MV9 TOP-ENTRY BALL VALVE MV13 THROUGH-CONDUIT GATE VALVE (FORGED BODY) MV11 SIDE-ENTRY BALL VALVE BALL AND API 6A GATE VALVES FOR WELLHEADS AND CHRISTMAS TREES 2 COMPANY PROFILE

More information

Introduction. Application & Installation. Integral Block & Bleed Valves

Introduction. Application & Installation. Integral Block & Bleed Valves Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining

More information

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

Jordan Control Valve Series

Jordan Control Valve Series Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates

More information

Table of Contents. Choke Principle...4

Table of Contents. Choke Principle...4 Table of Contents Choke Principle...4 Positive and Adjustable Choke Features and Benefits of Positive and Adjustable Choke...5 Avialable Sizes and Pressure Ratings... Positive Choke...6 Adjustable Choke...7

More information

Fully Welded Ball Valves

Fully Welded Ball Valves Fully Welded Ball Valves Company s Profile Established:..............1956, family owned company Managing Director:.....Dr. Ing. Thomas Böhmer Employees:...............250 Annual turnover:........60 Mill.

More information

Floating Ball Valve - Design Features

Floating Ball Valve - Design Features 408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

More information

Bolted bonnet configuration

Bolted bonnet configuration The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical

More information

Fully Welded Ball Valves

Fully Welded Ball Valves Fully Welded Ball Valves Company s Profile Established:... 1956, family owned company Managing Director: Dr. Ing. Thomas Böhmer Employees:... 300 Annual Turnover:... 60 Mill. EUR Production Area:... 269000

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire

More information

Please note this is a condensed catalog. For a complete version, contact Velan directly.

Please note this is a condensed catalog. For a complete version, contact Velan directly. Please note this is a condensed catalog. For a complete version, contact Velan directly. VELAN VALVES IN POWER With an installed base covering over 300 nuclear power plants and over 2,000 thermal power

More information

Fully Welded Ball Valves

Fully Welded Ball Valves Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure

More information

(281) Thru Conduit Slab & Expanding Gate Valves - API 6A & API 6D. Class: Sizes: 2-36

(281) Thru Conduit Slab & Expanding Gate Valves - API 6A & API 6D. Class: Sizes: 2-36 (281) 482-4728 www.scvvalve.com Thru Conduit Slab & Expanding Gate Valves - API 6A & API 6D Class: 150-1500 Sizes: 2-36 SCV VALVE manufactures some of the most dependable cast steel Thru Conduit Slab and

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information

M&J Valve Product Overview

M&J Valve Product Overview M&J Valve Product Overview M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, M&J Valve meets or exceeds the quality

More information

Trunnion Ball Valves

Trunnion Ball Valves Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure

More information

Trunnion Ball Valves

Trunnion Ball Valves Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high

More information

Triple Offset Valves

Triple Offset Valves Triple Offset Valves FLOWSEAL MS Value Statement For the harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, the Flowseal MS triple-offset

More information

M Series Floating Metal Seat Ball Valve

M Series Floating Metal Seat Ball Valve M Series Floating Metal Valve 1 M Series Floating Metal Valve Full Bore Two-piece Flanged Ends ANSI 150/300/600LB The A-T Controls M Series metal seat ball valve is designed for use in severe services

More information

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE

More information

BALL VALVES AND ACTUATORS E-CATALOG

BALL VALVES AND ACTUATORS E-CATALOG BALL VALVES AND ACTUATORS E-CATALOG CONTENTS INTRODUCTION 3 MODEL SYSTEM 3-5 FLOATING TYPE SOFT SEATED BALL VALVE 6-8 CAST STEEL TRUNNION MOUNTED BALL VALVE 8-10 FORGED STEEL TRUNNION MOUNTED BALL VALVE

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

L&T VALVES BUSINESS GROUP A

L&T VALVES BUSINESS GROUP A Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish

More information

authorized distributor

authorized distributor PT JAWA MAKMUR TEKNIK UTAMA flow solutions authorized distributor BALL VALVES INDUSTRIES & APPLICATIONS INDUSTRIES Oil & Gas Exploration & Production Pipelines & Processing Plants Refining & Petrochemical

More information

Double Block and Bleed Plug Valves

Double Block and Bleed Plug Valves Double Block and Bleed Plug Valves ASME Class 150 to 600 50 mm to 1050 mm (2 to 42 ) API 6D L&T Valves L&T Valves is a wholly owned subsidiary of Larsen & Toubro. Backed by a heritage of excellence that

More information

LVS SUP-R-SEAL MODEL ES GATE VALVES

LVS SUP-R-SEAL MODEL ES GATE VALVES LVS SUP-R-SEAL MODEL ES GATE VALVES LOUISIANA VALVE SOURCE INC. LOUISIANA VALVE SOURCE INC. PROUDLY MADE AND ASSEMBLED IN USA May 2012 Page 1 www.lavalve.com ENGINEERING BULLETIN 2014 Table of Contents:

More information

Trunnion Mounted Ball Valve MANUAL CONTENTS

Trunnion Mounted Ball Valve MANUAL CONTENTS Trunnion Mounted Ball Valve MANUAL CONTENTS M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, Inc., the M&J Valve

More information

Instrumentation & Piping valves

Instrumentation & Piping valves Instrumentation & Piping valves Monoflange valves Plug valves Large bore ball valves Injection & sampling valves Double block & bleeds Various instrumentation valves DELIVERY PROGRAM www.imperialvalve.nl

More information

VALVES API 6A Compact Ball Valves

VALVES API 6A Compact Ball Valves VALVES API 6A Compact Ball Valves Space and Weight Saving Zero Leakage and Superior Performance The Standard in Non-Standard Valve Production www.uscortec.com Compact Ball Valves CORTEC Compact Ball Valves

More information

Series A angle pattern control valves

Series A angle pattern control valves Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern

More information

KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES

KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES A new generation of ball valves with fugitive emission control and ISO mounting pad FEATURES GENERAL APPLICATIONS Pulp and paper, reactive monomers, oil and gas production, steam, hot gases, toxic and

More information

Block & Bleed Valve.

Block & Bleed Valve. Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange

More information

WKM VALVES. Pow-R-Seal Gate Valves. REQUEST A QUOTE SCHEDULE SERVICES

WKM VALVES. Pow-R-Seal Gate Valves. REQUEST A QUOTE SCHEDULE SERVICES WKM VALVES Pow-R-Seal Gate Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM TABLE OF CONTENTS WKM Pow-r-seal Gate Valves Introduction... 3 Design... 4 Operating Principles...

More information

GROVE Valves. Durable, dependable technology in severe service conditions

GROVE Valves. Durable, dependable technology in severe service conditions GROVE Valves Durable, dependable technology in severe service conditions Contents History.......................................................................................2 GROVE IST* Integrated Seat

More information

Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification

Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for

More information

FLANGED 150 & 300 FULL PORT BALL VALVES

FLANGED 150 & 300 FULL PORT BALL VALVES FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL

More information

CRYOGENIC. Italian Manufactured, Italian Quality

CRYOGENIC. Italian Manufactured, Italian Quality Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction

More information

TRUNNION MOUNTED BALL VALVES

TRUNNION MOUNTED BALL VALVES TRUNNION MOUNTED BALL VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production

More information

Fisher Z500 Severe Service Ball Valves

Fisher Z500 Severe Service Ball Valves Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve

More information

Compact Expanding Gate Valve

Compact Expanding Gate Valve Compact Expanding Gate Valve M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SP Flow Technology, M&J Valve meets or exceeds

More information

Forged 3 Piece Trunnion Mounted Ball Valves Series MS

Forged 3 Piece Trunnion Mounted Ball Valves Series MS Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional

More information