LCS6822 (Class 150) LCS7822 (Class 300)
|
|
|
- Grace Green
- 6 years ago
- Views:
Transcription
1 Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications must be approved by the manufacturer Heating Hot Water Condenser Water Glycol Chilled Water Compressed Air Steam rated - 2" - 12" 150 psi for on/off applications and 50 psi modulating Chemical Process Isolation and Throttling Domestic Water MATERIALS & CONSTRUCTION Body constructed of carbon steel Stainless steel disc and stem Seats of reinforced PTFE for exceptional chemical and heat resistance Welded disc pins Silicone is not used in the manufacture of this valve DESIGN CRITERIA MSS SP-68 (Design & Testing) MSS SP-25 (Markings) API-609 Seat Pressure/ Temperature Ratings/ Blow-out proof stem ASME/ANSI B16.34A, Body Pressure/Temperature Ratings ASME/ANSI B16.5 Flange Dimensions ISO 5211, EN Actuator Mounting Top Works ANSI Class 150 and Class 300 Dual Offset Design Class 150 Pictured FEATURES Powder coated epoxy finish One-piece stem Direct mount actuation Live loaded adjustable packing with unique flush-mounted packing gland Integrally cast disc-stop Dual offset design Blow-out proof stem Bi-directional dead end service (Arrow on body indicates preferred flow) Maximum operating temperature 400 F at 100 psi 100% production tested per MSS SP-68 36
2 Revision 8/22/2012 High Performance Butterfly Valve Series 6822 & 7822 Carbon Steel Body Stainless Steel Disc and Stem ISO 5211 Actuation Mounting Class Sizes 2" through 30" Class Sizes 2" through 24" ANSI Class 150 & 300 Part Material List Specification 1. Stem Stainless Steel UNS ASTM A564 UNS S Flange, Gland Stainless Steel ASTM A351 Grade CF8M 3. Retainer, Stem (4) Stainless Steel ASTM A276 UNS S Gland, Packing Stainless Steel ASTM A276 UNS S Packing (set) PTFE 6. Retainer, Packing Stainless Steel ASTM A276 UNS S Lockwasher (2) Stainless Steel Type Nut (2) Stainless Steel Type Stud (2) Stainless Steel Type Screw, SHCS Stainless Steel Type Retainer, Seat Stainless Steel ASTM A276 UNS S Bushing, Upper Stainless Steel Type 304 PTFE Coated 13. Seat PTFE 15% Glass Reinforced 14. Disc Stainless Steel ASTM A351 Grade CF8M 15. Pin, Disc (2) Stainless Steel ASTM A276 UNS S Bushing, Lower Stainless Steel TYPE 304 PTFE Coated 17. Body Carbon Steel ASTM A216 GRADE WCB 18. Disc, Spacer Stainless Steel ASTM A240 UNS S Seal, Lower PTFE 20. Cap, Body Stainless Steel ASTM A351 Grade CF8M 21. Lockwasher (4) Stainless Steel Type Screw, Hex (4) Stainless Steel Type Handle Assembly Mallable Iron (shown separately) 24. Plate, Throttle Steel, Plated (shown separately) 25. Screw, Hex Carbon Steel, Plated (shown separately) 26. Lockwasher Carbon Steel, Plated (shown separately) 27. Key Carbon Steel ASTM A108 Grade ID Plate Stainless Steel NOTE: For severe steam applications, contact NIBCO Technical Services. NOTE: If valve is installed opposite the flow arrow for dead end service a downstream flange is recommended. 2" - 8" Class 150 Valves 2" - 6" Class 300 Valves 10" - 30" Class 150 Valves 8" - 24" Class 300 Valves 37
3 Revision 9/7/2012 High Performance Butterfly Valve Series 6822 Sizes 2" through 30" (2" - 8" Valves) (10" - 30" Valves) ANSI Class 150 DIMENSIONS WEIGHTS Gear Valve Operator A B C D E F G Size Mounting In. mm In. mm. In. mm. In. mm. In. mm. Threads In. mm. 2" F X 5/8"-11 UNC ½" F X 5/8"-11 UNC " F X 5/8"-11 UNC " F X 5/8"-11 UNC " F X 3/4"-10 UNC " F X 3/4"-10 UNC " F X 3/4"-10 UNC " F X 7/8"-9 UNC " F X 7/8"-9 UNC " F X 1"-8 UNC " F X 1"-8 UNC " F X 1-1/8"-8 UN* " F X 1-1/8"-8 UN* " F16/F X 1-1/4"-8 UN* " F X 1-1/4"88 UN* *Special Pitch cap screw thread required per mss SP-68 specifications. Operating Torque Valve H J K L M N P Valve Wt. at 285 psi Size In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. In.-Lbs. N-m 2" ½" " " " " " " /4" X 1/4" " /4" X 1/4" " /16" X 5/16" " /8" X 1/2" " /8" X 1/2" " /2" X 1/2" " /4" X 1/2" " X
4 Revision 9/7/2012 High Performance Butterfly Valve Series 7822 Sizes 2" through 24" (2" - 6" Valves) (8" - 24" Valves) ANSI Class 300 DIMENSIONS WEIGHTS Gear Valve Operator A B C D E F G Size Mounting In. mm In. mm. In. mm. In. mm. In. mm. Threads In. mm. 2" F X 5/8"-11 UNC ½" F X 3/4"-10 UNC " F X 3/4"-10 UNC " F X 3/4"-10 UNC " F X 3/4"-10 UNC " F X 3/4"-10 UNC " F X 7/8"-9 UNC " F X 1"-8 UNC " F X 1-1/8"-8 UN* " F X 1-1/8"-8 UN* " F X 1-1/4"-8 UN* " F X 1-1/4"-8 UN* " F X 1-1/4"-8 UN* " F X 1-1/2"-8 UN* *Special Pitch cap screw thread required per mss SP-68 specifications. Operating Torque Valve H J K L M N P Valve at 700 psi Size In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. In.-Lbs. N-m 2" ½" " " " " " /4" X 1/4" " /16" X 5/16" " /8" X 3/8" " /2" X 3/8" " /2" X 3/8" " /4" X 1/2" " /4" X 1/2" " /4" X 1/2" 39
5 Revision 8/29/2012 High Performance Butterfly Valve Technical Data Class 150 HPBFV 6800 Series Flow Data Valv Size Cv DISC OPEN - Degrees Rating " ½" " " " " " " " " " " " " " Class 300 HPBFV 7800 Series Flow Data Valve Size Cv Rating DISC OPEN - Degrees " ½" " " " " " " " " " " " " Cv = Flow in U.S. Gallons per minute of 60 F water with a 1 psi pressure drop across valve Temperature F Class 150 Class Pressure PSI 40
6 Revision 8/22/2012 High Performance Butterfly Valve Technical Data OPERATORS Gear operator Dimensions Valve Size NIBCO Gear Gear Gear Operator A B C D Material Ratio Operator Operator Class 150 Class 300 Figure Number Number Efficiency Mounting In. mm. In. mm. In. mm. In. mm. 2" 2" GO24:1-1-8 RG :1 15% F /2", 3", 4" 2-1/2", 3", 4" GO24:1-3-8 W/STSA-4 RG :1 15% F ", 6" 5", 6" GO24:1-3-8 W/STSA-5 RG :1 15% F " GO30: W/STSA-6 RG :1 19% F " GO30: RG :1 19% F " GO30: RG :1 19% F ", 14" 10", 12" GO50: RG :1 20% F " GO80: RG :1 20% F " GO80: RG :1 16% D " GO320: RG :1 16% F " GO320: RG :1 16% F " GO320: RG :1 15% F Valve Size E G H J Mounting Handwheel Weight Class 150 Class 300 In. mm. In. mm. In. mm. In. mm. Screws Pin Size Lbs. Kg. 2" 2" /16"-18 UNC Ø.190 X 1.63 LONG /2", 3", 4" 2-1/2", 3", 4" /16"-18 UNC Ø.190 X 1.63 LONG ", 6" 5", 6" /16"-18 UNC Ø.190 X 1.63 LONG " /8"-16 UNC Ø.190 X 1.63 LONG " /8"-16 UNC Ø.190 X 1.63 LONG " /8"-16 UNC Ø.190 X 1.63 LONG ", 14" 10", 12" /2"-13 UNC Ø.190 X 1.63 LONG " /4"-10 UNC Ø.380 X 1.81 LONG " /4"-10 UNC Ø.380 X 1.81 LONG " /4"-10 UNC Ø.380 X 2.50 LONG " /8"-11 UNC Ø.380 X 2.50 LONG " /8"-11 UNC Ø.380 X 2.50 LONG Lever Handle Item Description Material 23 Handle Assembly Mallable Iron 24 Plate, Throttle Steel, Plated 25 Screw, Hex Carbon Steel, Plated 26 Lockwasher Carbon Steel, Plated Locking Handle Optional 2" - 6" Sizes Only 41
7 Revision 9/13/2010 High Performance Butterfly Valve Technical Data Part Material List Specification 1. Stem Stainless Steel UNS ASTM A564 UNS S Flange, Gland Stainless Steel ASTM A351 Grade CF8M 3. Retainer, Stem (2) Stainless Steel ASTM A276 UNS S Gland, Packing Stainless Steel ASTM A276 UNS S Packing PTFE 6. Retainer, Packing Stainless Steel ASTM A276 UNS S Lockwasher (2) Stainless Steel Type Nut (2) Stainless Steel Type Stud (2) Stainless Steel Type Screw, SHCS Stainless Steel Type Retainer, Seat Stainless Steel ASTM A276 UNS S Bushing, Upper Stainless Steel Type 304 PTFE Coated 13. Seat PTFE 15% Glass Reinforced 14. Disc Stainless Steel ASTM A351 Grade CF8M 15. Pin, Disc (2) Stainless Steel ASTM A276 UNS S Bushing, Lower Stainless Steel Type 304 PTFE Coated 17. Body Carbon Steel ASTM A216 Grade WCB 18. Disc, Spacer Stainless Steel ASTM A240 UNS S Seal, Lower PTFE 20. Cap, Body Stainless Steel ASTM A351 Grade CF8M 21. Lockwasher (4) Stainless Steel Type Screw, Hex (4) Stainless Steel Type
HIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
High Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
HIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by
Series EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM
Series 600 - EPM Seat Lug Type backed EPM seats. Accompanied by a precision machined 316 SS disc, it offers low operating torque, Lug-EPM Model 600 Series s are epoxy coated with extended neck which makes
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
F20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
BUTTERFLY VALVES Resilient Seated
General Purpose Butterfly Valves 141 Series & 145 Series Item Description Material 1 Body Ductile Iron ASTM A536 (65-45-12) 2 Seat 3 Shaft 4 Disc AVAILABLE OPTIONS 10 Position Handle Gear Operator Infinite
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
SERIES 9000 Double Offset HP Butterfly Valves
SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear
Series 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
Standard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
KEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
BUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
butterfly valves Quality, Service A history of and Innovation
A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters
F low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
VF Series High-Pressure, High-Temperature Butterfly Valves
Product Bulletin VF Series No. 3 Issue Date 11/01/01 VF Series High-Pressure, High-Temperature Butterfly s VF Series High-Pressure, High-Temperature Butterfly s are specifically designed for a wide range
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
SERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
ptfe seated 30 years of high quality experience
ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation
DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
Butterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Series 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
butterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
NELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB0400-00 1 TABLE OF CONTENTS PAGE Theory of Operation.. 3 General Ordering Information 4 Torque values ASME Cl. 150. 5 Torque values
POWER-SEAL Series P1S / P1F / P1M / P1H Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300
POWER-SEAL Series P1S / P1F / P1M / P1H Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300 NEW DESIGN - Reduced Torque - Featuring Actuators and Accessories TABLE OF CONTENTS
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
Certified and in full compliance to: CSA / ANSI Z CSA 6.5A 2000 / ANSI Z21.21A 2000 CSA 3.9 M94 / CGA 3.9 (C/I) CSA 3.
Certified and Approved To -40 C/ F Liquid & Gas Safety Shutoff Valves FM-7412 Certified and in full compliance to: CSA 6.5 2000 / ANSI Z21.21 2000 CSA 6.5A 2000 / ANSI Z21.21A 2000 CSA 3.9 M94 / CGA 3.9
K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
DUCTILE IRON & STAINLESS STEEL Butterfly Valves
DELTATPRODUCTS NSF/ANSI 372 LOW LEAD CONTENT ONLY MC#218481 3 Year Limited Warranty DUCTILE IRON & STAINLESS STEEL Butterfly Valves 2 24 200/150 PSI Bi-Directional Service DTP-BFV-12.001.R4 DeltaT 050/051
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
Series 8500 Grayline Butterfly Valves
Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Fisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
K-LOK High Performance Butterfly Valve Sizes 2 12-inch ANSI Class 150
K-LOK High Performance Butterfly Valve Sizes 2 2-inch ANSI Class 50 Features and Benefits Uninterrupted gasket surfaces eliminate problems associated with seat retaining screws in the gasket surface and
SERIES ECCENTRIC DISC CONTROL VALVES
1-2471 SERIES ECCENTRIC DISC CONTROL VALVES - 2 - 1-2471 SERIES ECCENTRIC DISC CONTROL VALVES 1-2471 series control valves feature a double eccentric disc and an easy-to-be changed PTFE or metal seal ring.
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
Series 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
Innovative World Leader
Innovative World Leader The ANSWER to Tight shut-off in various applications, Series 600 Triple offset butterfly valve is a virtual solution for heavy duty process, high pressure & temperature, and high
Fisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
Butterfly Valves (BFV)
Butterfly Valves (BFV) O904-02/12 - Subject to change. Belimo Aircontrols (USA), Inc. Application A comprehensive line of Butterfl y Valves is available in sizes ranging from 2 to 30 in both standard and
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
FEATURES FLP SERIES COMPLETE ASSEMBLIES FL SERIES PRODUCT CONFIGURATOR ONE VALVE DOES IT ALL
Thermal Shutdown Valves for Fire Protection Systems FLP SERIES COMPLETE ASSEMBLIES BI-TORQ Valve Automation s complete line of API 0 certified quarter-turn valves suit a wide range of applications. Carbon
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
DRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
Series 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
Keystone High Performance Butterfly Valves Series 36 and 37, 2" to 36"
K-LOK Series 36 ASME 150 K-LOK Series 37 ASME 300 Features and Benefits K-LOK polymer and elastomer seats provide bi-directional, drop-tight closure in vacuum as well as at full rated differential pressure.
Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE 21 TRIPLE OFFSET 31 SPECIAL BUTTERFLY VALVE 67 TECHNICAL FEATURES 73
BUTTERFLY VALVES The information in this catalog is correct except for error or omission and could be changed without notice. Ref.: BUTTERFLY-202014 TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
KEYSTONE SERIES 60 BUTTERFLY VALVE
60W wafer style resilient seated butterfly valve 60L lug style resilient seated butterfly valve Cartridge seat design FATURS GNRAL APPLICATION Ideally suited for many industrial applications such as food