Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
|
|
- Laurel Summers
- 6 years ago
- Views:
Transcription
1
2 able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter 33 Male Bulkhead Connector 10 Port Connector 35 Sync-Lok instrumentation tube fittings provide a leak-proof seal which will withstand high pressure, impulse, vibration & tempature. hese features offer the highest safety and maintenance-free operation. ach component of our tube fittings is precision machined to the highest tolerances, while maintaining QM practices throughout the manufacturing process. Our engineers can design and produce any product against supplied specifications. Our Q.A. department continues to monitor and update the quality in accordance with ISO 9001 and C marking requirements. Complete traceability records are available upon request. ube fittings are available in 316SS as standard. Also available in Brass, Carbon Steel, Monel, Duplex and many others. All pipe threads meet the requirement of ASM/ANSI B for tapered pipe threads (NP) Working pressure meets the requirements of Power Piping Code ANSI B31.1 and section VII of AMS Boiler & Pressure Vessel Code. Straight fittings are machined from bar stock and shaped bodies and machined from forging unctions Male lbow 11 Male lbow Male Run ee 14 Male Branch ee 15 emale Connector 16 emale Bulkhead Connector 18 emale lbow 19 emale Run ee 20 emale Branch ee 21 Union 22 Reducing Union 23 Bulkhead Union 24 Union lbow 25 Reducing Port Connector 36 Male Pipe Weld Connector 37 Male Pipe Weld lbow 38 ube Socket Weld lbow 38 ube Socket Weld Connector 38 ube Cap 39 ube Plug 40 Nut 40 ront errule 41 Rear errule 41 Hex/Reducing/Long/Close Nipple 43 Coupling/Adapter/Bushing/Cap 44 emale/male/street lbow 47 Assembly Instructions ig. 3 3/4 turn ig /4 turn Compression Nut hreads are silver plated to prevent galling. he back errule locks onto the tube forming a seal which absorbs pressure pulses and vibration. he ront errule is the primary seal which ensures a bubble tight, zero leak seal between the tube and the fitting body. Rugged body construction. High pressure machined surface provides maximum trouble-free service in severe working conditions. 1. Insert the tubing into the Sync-Lok tube fitting until it comes to the tube stop 2. nsure that the nut is finger tight. 3. itting sizes of 1/8 and 3/16 only require 3/4 turn tightening as shown in fig.3 4. itting sizes of 1/4-1 ( 6-25) require 1-1/4 turn tightening as shown in fig.4 Identification of Sync-Lok ube ittings Metric ube nd metric size tube fittings have an extra step on the body shoulder and the nut to distinguish from fractional sizes Union ee 26 emale/male/street/branch ee 48 ractional ube nd 1
3 NP / ISO in. eeral Information Material Standards Material Bar Stock a orging b ubing 316 S.S. ASM A276 ASM A182 ASM-SA-213 / ASM-A-213 ASM SA479 ASM SA182 Brass ASM B16 ASM B283 Alloy 400 ASM B164 ASM B564 ASM SB164 ASM SB564 Alloy 600 ASM B166 ASM B564 ASM SB166 ASM SB564 ASM-A-249 / ASM-A-269 MIL / MIL ASM-B75 ASM-SB75 (MPR O ) ASM-B-163 Alloy C-276 ASM B574 ASM SB564 ASM-B-622 / ASM-B-626 Carbon Steel ASM A108 P ASM D1710 ASM D3293 (a) includes straight configurations Pipe nd Pressure Ratings Calculations based on ASM b31.3 code for process piping 316 SS and Carbon Steel Brass Male emale Male emale psig bar psig bar psig bar psig bar 1/ / / / / / / / Stress Value based on ANSI B31.3 code for process piping Material Allowable Ultimate ensile Stress Value Design Strehgth actor psi bar psig bar 316 SS : Brass : Steel : SA / MS hread Size 5/ / /2-20 SA J542b / SA J525b ASM-A-179 (b) includes elbows, crosses and tees SA/MS Pressure Rating Pressure ratings are from SA J1926/3 316 SS and Carbon Steel (Nonpositionable) (Positionable) psig bar psig bar / / / / / / / / / eeral Information - ube itting xample 1 - ube to Pipe ends he part number below shows male connector, stainless steel type 316, tube O.D 1/4 x 1/4 Male NP 4 MC ube O.D.: see tube O.D. designator 2. Name of fitting: see fitting type designator 3. Pipe thread end: see pipe thread designator xample 2 - ube to ube ends Sync-Lok Union tube O.D. 1/4, material SS316 4 U 1 2 Material Designator Material Designator 316 Stainless Steel No designation Brass B Carbon Steel CS Monel MO hread Specifications Pipe hread Relevent Standards NP ASM B1.20.1, MIL-P-7105B ISO/BSP (parallel) ISO 228, BS 2779, JIS B 0202 ISO/BSP (taperedl) ISO 7, BS21, JIS B 0203 ISO/BSP (gauge) (Based on DIN ) ISO 228, BS 2779 Unified (SA) ASM B 1.1 ube O.D. Designator itting Designators Identifier MC MCB MBH M LM M M C BH U RU BHU LU UC RD BHR APM AP PC RPC MPWC MPW SWC SW BP B N R Description Male Connector Male Bore hrough Connector Male Bulkhead Connector Male lbow Male lbow 45o Male Run ee Male Branch ee emale Connector emale Bulkhead Connector emale lbow emale Run ee emale Branch ee Union Reducing Union Bulkhead Union Union lbow Union ee Union Cross Reducer Bulkhead Reducer Male Adapter emale Adapter Port Connector Reducing Port Connector Male Pipe Weld Connector Male Pipe Weld lbow ube Socket Weld Connector ube Socket Weld lbow ube Plug ube Cap Nut ront errule Rear errule ube O.D. (inch) 1/16 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Identifier ube O.D. (metric) Identifier 2MM 3MM 4MM 6MM 8MM 10MM 12MM 16MM 20MM 22MM 25MM Pipe hread Size Designator 1/16 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Identifier
4 eeral Information - Pipe itting itting Designators Identifier Description SHN SHRN SHLN SCN SLPN SHC SRC SA SRA SA SRB SCP SHP S SM SS SRS S SM SS SB SC Hex Nipple Hex Reducing Nipple Hex Long Nipple Close Nipple Long Pipe Nipple Coupling Reducing Coupling Adapter Reducing Adapter auge Adapter Reducing Bushing Pipe Cap Pipe Plug emale lbow Male lbow Street lbow Reducing Street lbow emale ee Male ee Street ee Branch ee Cross Pipe hread Size Designator Material Designator Material Designator 316 Stainless Steel SS Brass Carbon Steel Monel hread Specifications Pipe hread NP B CS MO Relevent Standards ASM B1.20.1, MIL-P-7105B ISO/BSP (parallel) ISO 228, BS 2779, JIS B 0202 ISO/BSP (taperedl) ISO 7, BS21, JIS B 0203 ISO/BSP (gauge) (Based on DIN ) ISO 228, BS 2779 Unified (SA) ASM B 1.1 1/16 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Identifier xample 1 - Pipe to Pipe ends Pressure Ratings Ratings are based on AMS Code for pressure piping B13.3 process piping at ambient temperature Material Allowable Stress Value (psi) Bar 316 SS Brass Steel emperature Ratings Material Max emperature ( ) 316 SS 1000 Brass Steel ube Selection Data Copper ractional ubing ube O.D. ube Wall hickness (Inches) inch / / / / / / / / / Copper Metric ubing ube O.D. ube Wall hickness () High quality soft annealed seamless copper tubing ASM B-165 or equivalent Allowable Stress = 6,500 psi between -20 and 100 Safety actor = 5 considering tensile strength to be 30,000 room tempertature 5. Material - see fitting material designator 4. Pipe hread nd - see pipe thread designator 3. Pipe hread nd - see pipe thread designator 2. Name of itting - see fitting type designator 1. Pipe itting Designated as S Installation instructions: o ensure leak tight seal, Sync-Lok recoends the use of pipe thread sealant on all NP threads. he most effective sealing method is the use of eflon ape. ape should be used on Male NP threads. Clean both male and female tapered threads. Wrap tape in thread direction of male taper Monel 400 ubing ube O.D. ube Wall hickness (Inches) inch / / / / / ully annealed quality seamless Monel 400 hydraulic tubing ASM B-165 or equivalent Hardness = Rb75 ubing free of scratches; suitable for bending and flaring Allowable Stress = 18,500 psi between -20 and 100 Safety actor = 4 considering tensile strength to be 70,000 room tempertature 4 5
5 ube Selection Data Male Connector Stainless Steel ractional ubing ube O.D. ube Wall hickness (Inches) inch / / / / / / / / / / Stainless Steel Metric ubing ube O.D. ube Wall hickness () ully annealed high quality (type 304, 316, etc.) seamless or welded Stainless Steel hydraulic tubing ASM A-269 or A-213 or equivalent Hardness = Rb80 or less ubing free of scratches; suitable for bending and flaring Allowable Stress = 19,500 psi between -20 and 100 Safety actor = 4 considering tensile strength to be 75,000 room tempertature. ube O.D () NP D C t L 1MC1 1/16 1/ /16 5/ MC2 1/16 1/ /16 7/ MC2 1/8 1/ /16 7/ MC4 1/8 1/ /16 7/ MC6 1/8 3/ /16 7/ MC8 1/8 1/ /8 7/ MC2 3/16 1/ /16 1/ MC4 3/16 1/ /16 1/ MC2 1/4 1/ /2 9/ MC4 1/4 1/ /16 9/ MC6 1/4 3/ /16 9/ MC8 1/4 1/ /8 9/ MC12 1/4 3/ /16 9/ MC2 5/16 1/ /16 5/ MC4 5/16 1/ /16 5/ MC6 5/16 3/ /16 5/ MC2 3/8 1/ /8 11/ MC4 3/8 1/ /8 11/ MC6 3/8 3/ /16 11/ MC8 3/8 1/ /8 11/ MC12 3/8 3/ /16 11/ MC2 1/2 1/ /16 7/ MC4 1/2 1/ /16 7/ MC6 1/2 3/ /16 7/ MC8 1/2 1/ /8 7/ MC12 1/2 3/ /16 7/ MC16 1/ /8 7/ MC6 5/8 3/ / MC8 5/8 1/ / MC12 5/8 3/ / MC8 3/4 1/ /16 1 1/ MC12 3/4 3/ /16 1 1/ MC16 3/ /8 1 1/ MC12 7/8 3/ /16 1 1/ MC16 7/ /8 1 1/ MC8 1 1/ /8 1 1/ MC12 1 3/ /8 1 1/ MC /8 1 1/
6 Male Connector Male Bore hrough Connector : ISO apered hread. ube O.D () (R)P D C t L 2MC2 - MM 2 1/ MC2 - MM 3 1/ MC4 - MM 3 1/ MC2 - MM 4 1/ MC4 - MM 4 1/ MC2 - MM 6 1/ MC4 - MM 6 1/ MC6 - MM 6 3/ MC8 - MM 6 1/ MC2 - MM 8 1/ MC4 - MM 8 1/ MC6 - MM 8 3/ MC8 - MM 8 1/ MC2 - MM 10 1/ MC4 - MM 10 1/ MC6 - MM 10 3/ MC8 - MM 10 1/ MC4 - MM 12 1/ MC6 - MM 12 3/ MC8 - MM 12 1/ MC12 - MM 12 3/ MC8 - MM 15 1/ MC4 - MM 16 1/ MC6 - MM 16 3/ MC8 - MM 16 1/ MC12 - MM 16 3/ MC8 - MM 18 1/ MC12 - MM 18 3/ MC8 - MM 20 1/ MC12 - MM 20 3/ MC12 - MM 22 3/ MC16 - MM MC12 - MM 25 3/ MC16 - MM ube O.D () NP Hex L C t B 1MC1 - B 1/16 1/16 5/ MC2 - B 1/16 1/8 7/ MC4 - B 1/16 1/4 9/ MC1 - B 1/8 1/16 3/ MC2 - B 1/8 1/8 7/ MC4 - B 1/8 1/4 9/ MC2 - B 3/16 1/8 7/ MC4 - B 3/16 1/4 9/ MC2 - B 1/4 1/8 1/ MC4 - B 1/4 1/4 9/ MC6 - B 1/4 3/8 11/ MC8 - B 1/4 1/2 7/ MC4 - B 5/16 1/4 9/ MC4 - B 3/8 1/4 5/ MC6 - B 3/8 3/8 11/ MC8 - B 3/8 1/2 7/ MC12 - B 3/8 3/4 1 1/ MC8 - B 1/2 1/2 7/ MC12 - B 1/2 3/4 1 1/ MC12 - B 5/8 3/4 1 1/ MC12 - B 3/4 3/4 1 1/ MC16 - B /
7 Male Bulkhead Connector Male lbow.. ube O.D () ube O.D () NP NP 1 1 D l l1 L L1 D l l1 L L1 Panel Panel Max Hole hickness Drill Size 2MBH2 1/8 1/ /2 1/2 7/ MBH2 1/4 1/ /8 5/8 9/ MBH4 1/4 1/ /8 5/8 9/ MBH4 3/8 1/ /4 3/4 11/ MBH6 1/2 3/ /16 15/16 7/ MBH8 1/2 1/ /16 15/16 7/ Panel Panel Max Hole Drill hickness Size 6MBH2 - MM 6 1/ MBH4 - MM 6 1/ MBH4 - MM 10 1/ MBH4 - MM 12 1/ ube O.D () NP D C l L L1 2M2 1/8 1/ /2 7/ M4 1/8 1/ /2 7/ M2 3/16 1/ /2 1/ M4 3/16 1/ /2 1/ M2 1/4 1/ /2 9/ M4 1/4 1/ /2 9/ M6 1/4 3/ /16 9/ M8 1/4 1/ /16 9/ M2 5/16 1/ /16 5/ M4 5/16 1/ /16 5/ M6 5/16 3/ /16 5/ M2 3/8 1/ /8 11/ M4 3/8 1/ /8 11/ M6 3/8 3/ /16 11/ M8 3/8 1/ /16 11/ M12 3/8 3/ /16 11/ M4 1/2 1/ /16 7/ M6 1/2 3/ /16 7/ M8 1/2 1/ /16 7/ M12 1/2 3/ /16 7/ M6 5/8 3/ / M8 5/8 1/ / M12 5/8 3/ / M8 3/4 1/ /16 1 1/ M12 3/4 3/ /16 1 1/ M12 7/8 3/ /4 1 1/ M12 1 3/ /64 1 1/ M /64 1 1/
8 Male lbow Male lbow 45. ube O.D () P * R(P) D C l L L1 3M2 - MM 3 1/ M4 - MM 3 1/ M2 - MM 4 1/ M4 - MM 4 1/ M2 - MM 6 1/ M4 - MM 6 1/ M6 - MM 6 3/ M8 - MM 6 1/ M2 - MM 8 1/ M4 - MM 8 1/ M6 - MM 8 3/ M8 - MM 8 1/ M2 - MM 10 1/ M4 - MM 10 1/ M6 - MM 10 3/ M8 - MM 10 1/ M2 - MM 12 1/ M4 - MM 12 1/ M6 - MM 12 3/ M8 - MM 12 1/ M12 - MM 12 3/ M6 - MM 16 3/ M8 - MM 16 1/ M12 - MM 16 3/ M8 - MM 18 1/ M12 - MM 18 3/ M8 - MM 20 1/ M12 - MM 20 3/ M12 - MM 22 3/ M16 - MM M12 - MM 25 3/ M16 - MM ube O.D () NP D C l L L1 4LM2 1/4 1/ /2 9/ LM4 1/4 1/ /2 9/ LM2 3/8 1/ /8 11/ LM4 3/8 1/ /8 11/ LM6 3/8 3/ /16 11/ LM6 1/2 3/ /16 7/
9 Male Run ee Male Branch ee ube O.D. () D C l L L1 NP 2M2 1/8 1/ /2 7/ M4 1/8 1/ /2 7/ M2 3/16 1/ /2 1/ M2 1/4 1/ /2 9/ M4 1/4 1/ /2 9/ M2 5/16 1/ /16 5/ M4 3/8 1/ /8 11/ M6 3/8 3/ /16 11/ M6 1/2 3/ /16 7/ M8 1/2 1/ /15 7/ M8 5/8 1/ / M12 3/4 3/ /16 1 1/ ube O.D () NP D C l L L1 2M2 1/8 1/ /2 7/ M4 1/8 1/ /2 7/ M2 3/16 1/ /2 1/ M2 1/4 1/ /2 9/ M4 1/4 1/ /2 9/ M2 5/16 1/ /16 5/ M4 3/8 1/ /8 11/ M6 3/8 3/ /16 11/ M6 1/2 3/ /16 7/ M8 1/2 1/ /16 7/ M8 5/8 1/ / M12 3/4 3/ /16 1 1/ ube O.D. () D C l L L1 NP 3M2 - MM 3 1/ M4 - MM 3 1/ M2 - MM 4 1/ M2 - MM 6 1/ M4 - MM 6 1/ M2 - MM 8 1/ M4 - MM 8 1/ M4 - MM 10 1/ M6 - MM 10 3/ M4 - MM 12 1/ M6 - MM 12 3/ M8 - MM 12 1/ M6 - MM 16 3/ M8 - MM 16 1/ M12 - MM 20 3/ ube O.D () NP D C l L L1 3M2 - MM 3 1/ M4 - MM 3 1/ M2 - MM 4 1/ M2 - MM 6 1/ M4 - MM 6 1/ M2 - MM 8 1/ M4 - MM 8 1/ M4 - MM 10 1/ M6 - MM 10 3/ M4 - MM 12 1/ M6 - MM 12 3/ M8 - MM 12 1/ M6 - MM 16 3/ M8 - MM 16 1/ M12 - MM 20 3/
10 emale Connector emale Connector. ube O.D () NP D C t L 2C2 1/8 1/ /16 7/ C4 1/8 1/ /4 7/ C2 3/16 1/ /16 1/ C2 1/4 1/ /16 9/ C4 1/4 1/ /4 9/ C6 1/4 3/ /8 9/ C8 1/4 1/ /16 9/ C2 5/16 1/ /16 5/ C4 5/16 1/ /4 5/ C2 3/8 1/ /8 11/ C4 3/8 1/ /4 11/ C6 3/8 3/ /8 11/ C8 3/8 1/ /16 11/ C12 3/8 3/ /16 11/ C4 1/2 1/ /16 7/ C6 1/2 3/ /8 7/ C8 1/2 1/ /16 7/ C12 1/2 3/ /16 7/ C6 5/8 3/ / C8 5/8 1/ / C8 3/4 1/ /16 1 1/ C12 3/4 3/ /16 1 1/ C12 7/8 3/ /16 1 1/ C12 1 3/ /8 1 1/ C /8 1 1/ ube O.D () (R)P D C t L 3C2 - MM 3 1/ C4 - MM 3 1/ C2 - MM 4 1/ C2 - MM 6 1/ C4 - MM 6 1/ C6 - MM 6 3/ C8 - MM 6 1/ C2 - MM 8 1/ C4 - MM 8 1/ C6 - MM 8 3/ C8 - MM 8 1/ C2 - MM 10 1/ C4 - MM 10 1/ C6 - MM 10 3/ C8 - MM 10 1/ C2 - MM 12 1/ C4 - MM 12 1/ C6 - MM 12 3/ C8 - MM 12 1/ C12 - MM 12 3/ C8 - MM 15 1/ C8 - MM 16 1/ C8 - MM 20 1/ C12 - MM 20 3/ C12 - MM 22 3/ C16 - MM C12 - MM 25 3/ C16 - MM
11 emale Bulkhead Connector emale lbow. ube O.D () NP 1 D l l1 L L1 Panel Panel Hole Max Drill Size hickness 2BH2 1/8 1/ /16 1/2 7/ BH2 1/4 1/ /8 5/8 9/ BH4 1/4 1/ /4 5/8 9/ BH4 3/8 1/ /4 3/4 11/ BH6 1/2 3/ /16 15/16 7/ BH8 1/2 1/ /16 15/16 7/ BH12 3/4 3/ /4 1 3/16 1 1/ ube O.D () NP 1 D l l1 L L1 Panel Hole Drill Size Panel Max hickness 6BH2 - MM 6 1/ BH4 - MM 6 1/ BH4 - MM 8 1/ BH8 - MM 12 1/ ube O.D () NP D C l L L1 22 1/8 1/ /2 7/ /8 1/ /16 7/ /16 1/ /2 1/ /4 1/ /2 9/ /4 1/ /16 9/ /4 3/ /16 9/ /4 1/ / /16 1/ /16 5/ /16 1/ /16 5/ /8 1/ /8 11/ /8 1/ /16 11/ /8 3/ /16 11/ /8 1/ / /2 1/ /16 7/ /2 3/ /16 7/ /2 1/ / /8 3/ / /8 1/ /4 1/ /16 1 1/ /4 3/ /4 1 1/ /8 3/ /4 1 1/ / /64 1 1/ /16 1 1/ ube O.D () P * R(P) D C l L L MM 6 1/ MM 6 3/ MM 6 1/ MM 8 1/ MM 8 1/ MM 10 1/ MM 10 3/ MM 10 1/ MM 12 3/ MM 12 1/
12 emale Run ee emale Branch ee. ube O.D () NP D C l L L1 22 1/8 1/ /2 7/ /4 1/ /2 9/ /4 1/ /16 9/ /8 1/ /16 11/ /2 3/ /16 7/ /2 1/ / /4 3/ /4 1 1/ ube O.D. NP D C l L L1 22 1/8 1/ /2 7/ /4 1/ /2 9/ /4 1/ /16 9/ /8 1/ /16 11/ /2 1/ /16 7/ /2 3/ /16 7/ /2 1/ /8 1/ / /4 3/ /4 1 1/ / /64 1 1/ /16 1 1/ ube O.D () (R) P P* D C l L L MM 6 1/ MM 6 1/ MM 6 1/ MM 8 1/ MM 8 1/ MM 8 3/ MM 8 1/ MM 12 1/ MM 12 3/ MM 12 1/ MM 16 1/ ube O.D.. D C l L L1 NP 62 - MM 6 1/ MM 6 1/ MM 6 3/ MM 6 1/ MM 8 1/ MM 8 1/ MM 8 3/ MM 8 1/ MM 10 1/ MM 10 3/ MM 10 1/ MM 12 1/ MM 12 3/ MM 12 1/ MM 16 1/
13 Union Reducing Union ube O.D.. D C l L 1U 1/ /16 5/ U 1/ /16 7/ U 3/ /16 1/ U 1/ /2 9/ U 5/ /16 5/ U 3/ /8 11/ U 1/ /16 5/ U 5/ / U 3/ /16 1 1/ U 7/ /16 1 1/ U /8 1 1/ ube O.D.. D C l L 2U - MM U - MM U - MM U - MM U - MM U - MM U - MM U - MM U - MM U - MM U - MM ube O.D D D1 C C1 l L 2RU1 1/8 1/ /16 7/16 5/ RU2 3/16 1/ /16 1/2 7/ RU2 1/4 1/ /2 9/16 7/ RU3 1/4 3/ /2 9/16 1/ RU2 5/16 1/ /16 5/8 7/ RU4 5/16 1/ /16 11/16 9/ RU2 3/8 1/ /8 11/16 7/ RU4 3/8 1/ /8 11/16 9/ RU5 3/8 5/ /8 7/8 5/ RU2 1/2 1/ /16 7/8 7/ RU4 1/2 1/ /16 7/8 9/ RU6 1/2 3/ / / RU6 5/8 3/ / / RU8 5/8 1/ /16 1 1/8 7/ RU4 3/4 1/ /16 1 1/8 9/ RU6 3/4 3/ /16 1 1/8 11/ RU8 3/4 1/ /16 1 1/8 7/ RU10 3/4 5/ /16 1 1/ RU8 1 1/ /8 1 1/2 7/ RU12 1 3/ /8 1 1/2 1 1/ ube O.D D D1 C C1 l L 6RU3 - MM RU4 - MM RU6 -MM RU6 - MM RU8 - MM RU6 - MM RU8 - MM RU10 -MM RU12 - MM RU18 - MM RU20 - MM
14 Bulkhead Union Union lbow. ube O.D. Panel Panel Hole Max D C l l1 L L1 Drill hickness Size 1BHU 1/ /16 5/ BHU 1/ /2 7/ BHU 3/ /16 1/ BHU 1/ /8 9/ BHU 5/ /16 5/ BHU 3/ /4 11/ BHU 1/ /16 7/ BHU 5/ / BHU 3/ /16 1 1/ BHU 7/ /8 1 1/ BHU /8 1 1/ ube O.D.. D C l L 1LU 1/ /8 5/ LU 1/ /8 7/ LU 3/ /2 1/ LU 1/ /2 9/ LU 5/ /16 5/ LU 3/ /8 11/ LU 1/ /16 7/ LU 5/ / LU 3/ /16 1 1/ LU 7/ /4 1 1/ LU /64 1 1/ ube O.D. Panel Panel 1 Hole Max D C l l1 L L1 Drill hickness Size 3BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM BHU - MM ube O.D.. D C l L 2LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM LU - MM
15 Union ee Union Cross ube O.D.. D C l L 1 1/ /8 5/ / /8 7/ / /2 1/ / /2 9/ / /16 5/ / /8 11/ / /16 7/ / / / /16 1 1/ / /4 1 1/ /64 1 1/ ube O.D.. D C l L 1UC 1/ /8 5/ UC 1/ /8 7/ UC 3/ /2 1/ UC 1/ /2 9/ UC 5/ /2 5/ UC 3/ /16 11/ UC 1/ /16 7/ UC 5/ / UC 3/ / UC 7/ /4 1 1/ UC /64 1 1/ ube O.D.. D C l L 2 - MM MM MM MM MM MM MM MM MM MM MM MM MM ube O.D.. D C l L 3UC - MM UC - MM UC - MM UC - MM UC - MM UC - MM UC - MM UC - MM UC - MM
16 Reducer Reducer ube O.D.. 1 D C l L 2RD1 1/8 1/ /16 7/ RD2 1/8 1/ /16 7/ RD3 1/8 3/ /16 7/ RD4 1/8 1/ /16 7/ RD6 1/8 3/ /16 7/ RD8 1/8 1/ /16 7/ RD2 3/16 1/ /16 1/ RD4 1/16 1/ /16 1/ RD2 1/4 1/ /2 9/ RD3 1/4 3/ /2 9/ RD4 1/4 1/ /2 9/ RD5 1/4 5/ /2 9/ RD6 1/4 3/ /2 9/ RD8 1/4 1/ /16 9/ RD10 1/4 5/ /16 9/ RD12 1/4 3/ /16 9/ RD6 5/16 3/ /16 5/ RD8 5/16 1/ /16 5/ RD4 3/8 1/ /8 11/ RD6 3/8 3/ /8 11/ RD8 3/8 1/ /8 11/ RD10 3/8 5/ /16 11/ RD12 3/8 3/ /16 11/ RD4 1/2 1/ /16 7/ RD6 1/2 3/ /16 7/ RD8 1/2 1/ /16 7/ RD10 1/2 5/ /16 7/ RD12 1/2 3/ /16 7/ RD16 1/ /16 7/ RD12 5/8 3/ / RD14 5/8 7/ / RD16 5/ / RD8 3/4 1/ /16 1 1/ RD16 3/ /16 1 1/ ube O.D.. 1 D C l L 3RD4 - MM RD6 - MM RD10 - MM RD6 - MM RD3 - MM RD8 - MM RD10 - MM RD12 - MM RD6 - MM RD10 - MM RD12 - MM RD6 - MM RD12 - MM RD15 - MM RD18 - MM RD6 - MM RD10 - MM RD16 - MM RD18 - MM RD20 - MM RD22 - MM RD25 - MM RD12 - MM RD12 - MM RD16 - MM RD20 - MM RD22 - MM RD25 - MM RD16 - MM RD18 - MM RD22 - MM RD25 - MM RD18 - MM RD20 - MM RD25 - MM RD18 - MM RD20 - MM
17 Reducer Male Adapter Metric to. ube O.D. 1 D C l L 3MRD2 3 1/ MRD4 3 1/ MRD4 6 1/ MRD5 6 5/ MRD6 6 3/ MRD8 6 1/ MRD6 8 3/ MRD8 8 1/ MRD6 10 3/ MRD8 10 1/ MRD8 12 1/ MRD / MRD / MRD Bulkhead Reducer. ube O.D. Panel Panel D l l1 l2 L L1 Hole Max Drill hickness Size 2BHR2 1/ /2 7/ BHR4 1/ /8 9/ BHR6 3/ /4 11/ BHR8 1/ /16 7/ ube O.D. Width Across lat P* 1 l L (NP) min 2APM2 1/8 1/ / APM4 1/8 1/ / APM2 3/16 1/ / APM4 3/16 1/ / APM2 1/4 1/ / APM4 1/4 1/ / APM6 1/4 3/ / APM8 1/4 1/ / APM2 5/16 1/ / APM4 5/16 1/ / APM2 3/8 1/ / APM4 3/8 1/ / APM6 3/8 3/ / APM8 3/8 1/ / APM4 1/2 1/ / APM6 1/2 3/ / APM8 1/2 1/ / APM6 5/8 3/ / APM8 5/8 1/ / APM12 5/8 3/ / APM8 3/4 1/ / APM12 3/4 3/ / APM16 3/ / APM12 7/8 3/ / APM12 1 3/ / APM /
18 Male Adapter emale Adapter ube O.D. Width Across lat P* 1 l L (NP) min 3APM2 - MM 3 1/ APM2 - MM 6 1/ APM4 - MM 6 1/ APM4 - MM 8 1/ APM4 - MM 10 1/ APM6 - MM 10 3/ APM8 - MM 10 1/ APM4 - MM 12 1/ APM6 - MM 12 3/ APM8 - MM 12 1/ APM8 - MM 18 1/ APM12 - MM 18 3/ ube O.D. Width Across lat P* l L (NP) min 2AP2 1/8 1/ / AP4 1/8 1/ / AP2 3/16 1/ / AP4 3/16 1/ / AP2 1/4 1/ / AP4 1/4 1/ / AP6 1/4 3/ / AP8 1/4 1/ / AP2 5/16 1/ / AP4 5/16 1/ / AP2 3/8 1/ / AP4 3/8 1/ / AP6 3/8 3/ / AP8 3/8 1/ / AP4 1/2 1/ / AP6 1/2 3/ / AP8 1/2 1/ / AP6 5/8 3/ / AP8 5/8 1/ / AP12 5/8 3/ / AP8 3/4 1/ / AP12 3/4 3/ / AP16 3/ / AP12 7/8 3/ / AP12 1 3/ / AP /
19 emale Adapter Port Connector ube O.D. Width Across lat P* l L (NP) min 3AP2 - MM 3 1/ AP2 - MM 6 1/ AP4 - MM 6 1/ AP4 - MM 8 1/ AP4 - MM 10 1/ AP6 - MM 10 3/ AP8 - MM 10 1/ AP4 - MM 12 1/ AP6 - MM 12 3/ AP8 - MM 12 1/ AP12 - MM 18 3/ ube O.D. H l L min 2PC 1/ PC 1/ PC 5/ PC 3/ PC 1/ PC 3/ PC ube O.D. H l L min 3PC - MM PC - MM PC - MM PC - MM PC - MM PC - MM
20 Reducing Port Connector Male Pipe Weld Connector ube O.D. Reduced O.D H l l1 L 1 min 4RPC2 1/4 1/ RPC2 3/8 1/ RPC4 3/8 1/ RPC4 1/2 1/ RPC6 1/2 3/ RPC8 3/4 1/ ube O.D. Reduced O.D 1 H l l1 L min 6RPC3 - MM RPC6 - MM RPC6 - MM RPC6 - MM RPC8 - MM RPC10 - MM RPC12 - MM ube O.D. Male Pipe D C l1 L Size P 2MPWC2 1/8 1/ /16 7/ MPWC2 3/16 1/ /16 1/ MPWC2 1/4 1/ /2 9/ MPWC4 1/4 1/ /16 9/ MPWC2 5/16 1/ /16 5/ MPWC4 5/16 1/ /16 5/ MPWC4 3/8 1/ /8 11/ MPWC6 3/8 3/ /16 11/ MPWC8 3/8 1/ /8 11/ MPWC6 1/2 3/ / MPWC8 1/2 1/ /8 7/ MPWC12 1/2 3/ /16 7/ MPWC8 5/8 1/ / MPWC12 3/4 3/ /16 1 1/ MPWC /8 1 1/ ube O.D. Male Pipe D C l l1 L Size P 3MPWC2 - MM 3 1/ MPWC2 - MM 4 1/ MPWC2 - MM 6 1/ MPWC4 - MM 6 1/ MPWC2 - MM 8 1/ MPWC4 - MM 8 1/ MPWC8 - MM 8 1/ MPWC4 - MM 10 1/ MPWC6 - MM 10 3/ MPWC8 - MM 10 1/ MPWC4 - MM 12 1/ MPWC6 - MM 12 3/ MPWC8 - MM 12 1/ MPWC8 - MM 15 1/ MPWC8 - MM 16 1/ MPWC8 - MM 18 1/
21 Male Pipe Weld lbow ube Cap ube O.D. Pipe Weld Size P D C l l1 L L1 2MPW2 1/8 1/ /2 9/ MPW4 1/4 1/ /2 9/ MPW4 3/8 1/ /8 11/ MPW8 1/2 1/ /16 7/ MPW12 3/4 3/ /16 1 1/ ube Socket Weld lbow ube O.D. H D C l l1 L L1 4SW4 1/ /2 9/ SW6 3/ /8 11/ SW8 1/ /16 7/ ube Socket Weld Connector ube O.D. H D C l l1 l2 L 2SWC2 1/ /16 7/ SWC4 1/ /2 9/ SWC4 3/ /8 11/ SWC8 1/ /16 7/ SWC12 3/ /16 1 1/ SWC /8 1 1/ ube O.D. D C l L 1B 1/16 5/16 5/ B 1/8 7/16 7/ B 3/16 7/16 1/ B 1/4 1/2 9/ B 5/16 9/16 5/ B 3/8 5/8 11/ B 1/2 13/16 7/ B 5/8 15/ B 3/4 1 1/16 1 1/ B 7/8 1 3/16 1 1/ B 1 1 3/8 1 1/ ube O.D. D C l L 2B - MM B - MM B - MM B - MM B - MM B - MM B - MM B - MM B - MM B - MM B - MM B - MM B - MM
22 ube Plug ront errule ube O.D. 2BP 1/8 7/16 3BP 3/16 1/2 4BP 1/4 9/16 5BP 5/16 5/8 6BP 3/8 11/16 8BP 1/2 7/8 10BP 5/8 1 12BP 3/4 1 1/8 14BP 7/8 1 1/4 16BP 1 1 1/2 ube O.D. 2BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM BP - MM ube O.D. 1 1/16 2 1/8 3 3/16 4 1/4 5 5/16 6 3/8 8 1/2 10 5/8 12 3/4 14 7/ ube O.D. 2 - MM MM MM MM MM MM MM MM MM MM MM MM MM 25 Nut Rear errule ube O.D. L 1N 1/16 5/ N 1/8 7/ N 3/16 1/ N 1/4 9/ N 5/16 5/ N 3/8 11/ N 1/2 7/ N 5/ N 3/4 1 1/ N 7/8 1 1/ N 1 1 1/ ube O.D. L 3N - MM N - MM N - MM N - MM MM N - MM N - MM N - MM N - MM N - MM N - MM N - MM ube O.D. 1R 1/16 2R 1/8 3R 3/16 4R 1/4 5R 5/16 6R 3/8 8R 1/2 10R 5/8 12R 3/4 14R 7/8 16R ube O.D. 2R - MM 2 3R - MM 3 4R - MM 4 6R - MM 6 8R - MM 8 10R - MM 10 12R - MM 12 15R - MM 15 16R - MM 16 18R - MM 18 20R - MM 20 22R - MM 22 25R - MM 25
23 Hex Nipple P-P, NP A SHN-01 1/ /16 SHN-02 1/ /16 SHN-04 1/ /16 SHN-06 3/ /16 SHN-08 1/ /8 SHN-12 3/ /16 SHN /8 Pipe itting Section Hex Reducing Nipple Hex Long Nipple P-P, NP P1-P, NP A SHRN /8 1/ /16 SHRN /4 1/ /16 SHRN /8 1/ /16 SHRN /8 1/ /16 SHRN /2 1/ /8 SHRN /2 1/ /8 SHRN /2 3/ /8 SHRN /4 1/ /16 SHRN /4 1/ /16 SHRN / /8 SHRN / /8 -A P-P, NP SHLN-02 1/ /16 SHLN-04 1/ /16 SHLN-06 3/ /16 SHLN-08 1/ /8 SHLN-12 3/ /16 SHLN /
24 Close Nipple Reducing Coupling P-P, NP A SCN-02 1/ SCN-04 1/ SCN-06 3/ SCN-08 1/ SCN-12 3/ SCN P-P, NP P1-P, NP A SRCN /4 1/ /16 SRCN /8 1/ /16 SRCN /2 1/ /16 SRCN /2 1/ /16 SRCN /2 3/ /16 SRCN /4 1/ /16 SRCN /4 1/ /16 SRCN / /8 SRCN / /8 Long Pipe Nipple Adapter -A P-P, NP A P-P, NP SA-02 1/ /16 SLPN-02 1/ SLPN-04 1/ SLPN-06 3/ SLPN-08 1/ SLPN-12 3/ SA-04 1/ /4 SA-06 3/ /8 SA-08 1/ /16 SA-12 3/ /16 SA /8 SLPN Coupling Reducing Adapter P-P, NP P1-P, NP A SRA /8 1/ /16 P-P, NP A SRA /4 1/ /4 SRA /8 1/ /8 SRA /8 1/ /8 SRA /2 1/ /16 SHC-02 1/ /16 SHC-04 1/ /4 SHC-06 3/ /8 SHC-08 1/ /16 SHC-12 3/ /16 SHC /8 SRA /2 1/ /16 SRA /2 3/ /16 SRA /4 1/ /16 SRA /4 3/ /16 SRA /4 1/ /16 SRA / /8 SRA / /8 SRA / /
25 auge Adapter Pipe Plug P-P,, BSPP P1-P, NP A P-P, NP A SA /4 19 1/ /16 SPP-01 1/ /16 SA /8 19 3/ /4 SPP-02 1/ /16 SA /2 14 1/ /8 SPP-04 1/ /16 SPP-06 3/ /16 SPP-08 1/ /8 SPP-12 3/ /16 SPP /8 Reducing Bushing P-P, NP P1-P, NP A SRB /8 1/ /16 emale lbow SRB /4 1/ /16 SRB /8 1/ /16 SRB /8 1/ /4 SRB /2 1/ /8 SRB /2 1/ /8 SRB /2 3/ /8 SRB /4 1/ /16 SRB /4 3/ /16 SRB /4 1/ /16 SRB / /8 SRB / /8 P-P, NP A S-02 1/ /8 S-04 1/ /16 S-06 3/ /16 S-08 1/ /8 S-12 3/ /8 S /16 SRB / /8 SRB / /8 Pipe Cap Male lbow P-P, NP A SPC-02 1/ /16 SPC-04 1/ /4 SPC-06 3/ /8 SPC-08 1/ /16 SPC-12 1/ /16 P-P, NP A SM-02 1/ /16 SM-04 1/ /2 SM-06 3/ /16 SM-08 1/ /16 SPC /
26 Street lbow Male ee P-P, NP A P-P, NP A SS-01 1/ /16 SS-02 1/ /8 SS-04 1/ /16 SS-06 3/ /16 SS-08 1/ /8 SS-12 3/ /8 SS /16 SM-02 1/ /16 SM-04 1/ /2 SM-06 3/ /16 SM-08 1/ /16 Reducing Street lbow Street ee P-P, NP P1-P, NP A SRS /4 1/ /16 SRS /8 1/ /16 SRS /2 1/ SRS /2 3/ SRS /4 1/ /4 SRS / /8 P-P, NP A B SS-02 1/ /8 SS-04 1/ /16 SS-06 3/ /16 SS-08 1/ /8 emale ee Branch ee P-P, NP A S-02 1/ /8 S-04 1/ /16 S-06 3/ /16 S-08 1/ /8 S-12 3/ /8 S /16 1. Part No P-P, NP A B SB-02 1/ /8 SB-04 1/ /16 SB-06 3/ /16 SB-08 1/ /
Gaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression Fittings and Instrumentation
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression and Instrumentation Valves
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More information10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationTHE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
More informationAn Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM
OMPRSSION U IINS 1/16 ROU 2 2 MM ROU 50 MM L-LOK U IINS SRIPION L-LOK O OS I ORK? he L-LOK tube fitting is a mechanism used both to seal and to grip tubing. he mechanical advantage and geometry of this
More informationPipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
More informationTHE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
More informationins LET-LOK (IMPERIAL) TUBE FITTINGS Page About Twin Ferrule Compression Fittings 2 Installation Instructions 3
ins bout win Ferrule Compression Fittings 2 nstallation nstructions 3 Conventions mperial Metric Page 4 32 ndex to et-ok mperial Fittings 4-5 -OK (MPR) UB FGS ndex to et-ok Metric Fittings 32-33 mm ndex
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationBRITISH DESIGN AND MANUFACTURE
ube ittings One of the most comprehensive component design and manufacture packages available today to the Oil and etrochemical Industry is offered by Safelok Components. arnessing the demands of the industry
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationISO 9001 Certified Fitting and Valve Manufacturer
ASM Accredited Nuclear & ISO900 Quality System ISO 900 Certified Fitting and Valve Manufacturer Catalog Number 0- January, 00 HYRAULIC SWAGING UNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over Certificates
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 HROUGH 2 -INCH, 2 MM HROUGH 50 MM-MERIC LE-LOK UBE FIINGS ESCRIPION he HM-LE GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications since its establishment
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationCOMPRESSION TUBE FITTINGS CONNECTORS
COMPRESSION UBE FIINGS CONNECORS 1/16 HROUGH 2 2 MM HROUGH 50 MM LE-LOK HO OES I ORK? LE-LOK UBE FIINGS ESCRIPION CONNECORS he LE-LOK tube fitting is a mechanism used both to seal and to grip tubing. he
More informationGaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
More informationInstrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
More informationAdmiralty Bronze Tube Fittings
Admiralty Bronze ube ittings One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components. arnessing the
More information20 Series Tube Fittings and Tubes
20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect
More informationInstrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More informationGriplok. Tube Fittings. Quality Instrumentation Fittings
ube ittings Quality Instrumentation ittings ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass and carbon
More informationAston Fittings. Manufacturing Ltd. machining. valves. fittings. pipe & tube. instrumentation packages
Aston Fittings Manufacturing Ltd. machining. valves. fittings. pipe & tube. instrumentation packages Intrumentation Pachages Aston are manufacturers and suppliers of Valves, Fittings, Flanges, ube and
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationGaugeable Tube Fittings and Adapter Fittings
Gaugeable Fittings and dapter Fittings www.swagelok.com Gaugeable Fittings and dapter Fittings TUB vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationInstrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
M- PRISION INSRUMN PIP IINS NR he M- Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries.
More informationPipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More informationDOUBLE FERRULE FITTINGS FLUID CONTROLS PRIVATE LIMITED
DOUBLE FERRULE FITTINGS FLUID CONTROLS PRIVATE LIMITED INTRODUCTION Fluid Controls Double Ferrule Compression Tube Fittings provide leak proof torque free seals at all tubing connections. They eliminate
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationStop valves SVA-S and SVA-L
MAKING MODERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationProduct Features: Ultra-High Purity cleaning, assembly, and packaging in a Class 100 Clean Room environment for all wetted components.
ittings Metal ace Seal and Weld ittings ittings designed for ultra-high purity conditions for critical applications hese UP fittings are designed for critical applications where ultra-high pure conditions
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationSTAUFF. Klemmringverschraubungen Twin Ferrule Compression Fittings. Local solutions for individual customers worldwide
STAUFF Klemmringverschraubungen Twin Ferrule Compression Fittings Local solutions for iniviual customers worlwie INDEX UNION SU Union SRU Reucing Union SBHRU Bulkhea Reucing Union SBHU Bulkhea Union CONNECTORS
More informationGyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Data Charts DESIGN HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities.
More informationGYROLOK. Tube Fittings
ube ittings Index YROOK itting ocator 2-7 YROOK eatures & enefits 8 YROOK esign 9 ow to Order 10 Pipe hread Information 11 S ittings Information 11 YROOK itting imensional & pplication ables 12 Replacement
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationStop valves SVA-S and SVA-L
MAKING MERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationGroup 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
More informationGroup 8. High Pressure Fittings and Tubing
Group 8 High Pressure Fittings and Tubing 8 INDEX Page Contents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JIC-JIC 5 0K Fittings JIC-NPT 6 0K Fittings BSP-BSP 7 0K Fittings BSP-JIC, BSP-NPT 8 Adapters
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationShinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationTri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, and Sno-Trik Series Products Rated up to 60 000 psig (4134 bar) nd connections up to 1 1/2 and 12 mm NC MR0175/ISO15156
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationInstrument Pipe & ISO Conversion Fittings. Catalog 4260 Revised, February 1999
Instrument Pipe & ISO Conversion ittings Catalog 4260 Revised, ebruary 1999 Instrument Pipe ittings Instrument Pipe ittings Introduction Parker Instrumentation Pipe ittings are designed as leakfree connections
More informationMetric One-Touch Fittings
Metric One-ouch Fittings pplicable tube material pplicable tube O.D (mm) With Sealant SQH 1/ 1/ Soft 3/ olyurethane ф ф ф ф ф SQ 1/ 1/ Soft 3/ olyurethane SQ 1/ 1/ Soft 3/ olyurethane SQY 1/ 1/ Soft 3/
More informationManifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
More informationSTAINLESS STEEL TUBE FITTINGS, VALVES AND TUBING HAITIMA CORPORATION HAITIMA CORPORATION. http : //
SINLSS SL HIIM CORORION http : //www.haitima.com.tw -mail : haitima@seed.net.tw aiwan Head Office 8., No.201, Sec. 2, iding Blvd., Neihu District, aipei City 114, aiwan R.O.C. L: +886-2-2658-5800 X: +886-2-2658-2266
More informationCertificate of Type Approval (RQS)
Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories
Medium- and High- Fittings, Tubing, Valves, and ccessories 1 www.swagelok.com www.swagelok.com Medium- and High- Fittings, Tubing, Valves, and ccessories FK, FKB, IPT, CTB, and Sno-Trik Series Products
More informationSCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
More informationNeedle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationBetabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
More informationInstrumentation Pipe & Weld Fittings. No.03-9 August 2017
Instrumentation ipe & Weld Fittings No.03-9 August 2017 Instrumentation ipe & Weld Fittings Technical Information Thread Fittings Close Nipple GNC 04 ipe lug G 07 Tee GT 10 ex Nipple GN ex Reducing Nipple
More information+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More information83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationCopper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10
Copper-Nickel Seawater Piping Systems Offshore product range: Pipes, fittings and flanges of OSNA 10 KME Germany AG & Co. KG OSNA 10 [GB] Member of the KME Group Contents Your Partner KME The Material
More informationSolution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More information60 Series Tube Fittings and Tubing
60 Series Fittings and ubing 60,000 psi (4137 bar) FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 Fax: +49 69 8900 4495 FIOK, Inc. 13843
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationINSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationSwagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
More informationCPV Manufacturing O-SEAL and Mark VIII Valves and Fittings
CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings January, 2017 503 Schoolhouse Road, Kennett Square, P: 215-386-6508 PA 19348 P: 215-386-6508 www.cpvmfg.com F: 215-387-9043 www.cpvmfg.com CPV
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationQuick-Connects. QC, QF, QM, and QTM Series. No twisting, turning, or wrenching necessary
www.swagelok.com Quick-Connects QC, Q, QM, and QTM No twisting, turning, or wrenching necessary Single-end shutoff, double-end shutoff, and full-flow models 2 Quick-Connects Contents Instrumentation Quick-Connects
More informationFOUR SERIES OF CHECK-ALL VALVES
INSERT HOUSED TUBING MINI-CHECK FOUR SERIES OF CHECK-ALL VALVES For nearly every possible application and need, you can economically install a Check- All valve. Lightweight, efficient, and rugged, every
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationTube Plugs.
Tube Plugs www.elliott-tool.com Tube Plugs Table of Contents Page Tube Plugs Aluminum Siphons Boilers-Firetube Boilers-Watertube Sugar Mill Vacuum Pans Surface Condensers Chillers & Heat Exchangers Feedwater
More information