Quality and tradition. New Tipping Trailer GOLD

Transcription

1 Quality and tradition New Tipping Trailer GOLD

2 ADVANTAGES STURDINESS PERFORMANCE FINISHING COMFORT Folds over the whole length Floor and side walls in 4 mm ST420 high tensile steel Stacked assembly of the floor and side walls Widened and lowered body chassis Tapered body Lighter body High loading capacity Easier use Improved body structure Series production, modern manufacturing processes Welds filled with body filler for more elasticity Shot-blasting and phosphating of the body and chassis Double layer of paint in cabin with electrostatic gun 40 km/h certification Seal on the door and new locking system Wide choice of running gears Wide sight window 180 folding parking stand Higher tipping stability and lowered centre of gravity Tubular chassis in high tensile steel Pilot valves to hold the door safely LED flashing beacon Folding front ladder Horizontal sprung drawbar Polyp body stand Many options GOLD2 Monocoque tipping trailer made of ST420 high tensile steel with 40 km/h certification payload from 11 to 22 t (body of 1.20 or 1.50 m high) Choose quality, tradition and innovation!

3 RUNNING GEAR PARABOLIC AND MULTI-LEAF SUSPENSION Mechanical suspensions with spring leaves, multi-leaf or parabolic suspensions stand for easy use and operation. Bogies are recommended because of their high wheel clearance, while tandems and tridems are the best compromise for use on both road and fields. HYDRAULIC SUSPENSION (only for Belgium) Available with 3 axles. In order to benefit from an optimal driving comfort on roads and difficult terrains, both on high and low speed, the use of a hydraulic suspension is the best solution. With a significant clearance of the hydraulic rams, it provides comfort and stability to the trailed vehicle on all types of terrain. It notably allows to adjust the vehicle height and to correct the effects of unevennesses. BOGIE The bogie is recommended for high wheel clearances. It is the best compromise between road and fields as well as between multi-functionality and longevity. Furthermore, it allows to cross ruts. With free steering system, it is also recommended for short and tight manoeuvres (even better with a steering system).

4 DETAILED VIEW AND LEGISLATION Fabrication française LARGE SIGHT WINDOW (WITH GALVANIZED PROTECTION) SPRUNG DRAWBAR OPTIONS MEETING YOUR LEGISLATION Side bumper Wheel chocks Side marker lights CH BE-LU BE

5 225 CM 230 CM TAPERED BODY IN HIGH TENSILE STEEL & TIPPING ANGLE OF MAX. 55 TIGHT HYDRAULIC DOOR & 50X50 CM CENTRAL GRAIN CHUTE PILOT VALVES SILENT-BLOCK (TO AVOID VIBRATIONS) LED FLASHING BEACON OMEGA CROSSPIECE FR white reflectors FR and RE end-outline marker lights Rear bumper BE-LU-CH BE-LU-CH BE-LU

6 GOLD2 XL RANGE BODY HEIGHT: 1.20 M Standard equipment on Gold 2 XL tipping trailers Tapered monocoque body (ST420 high tensile steel - 4 mm) 1-part hydraulic door (with seal) Multi-position central grain chute of 500 x 500 mm (width x height) Sight window on body (with perspex and galvanized protective grating) Galvanized access ladder LED flash light (flashing beacon on lighting) Hydraulic brakes Wheels 400R22.5 (handling wheels) Understand the model names: Example: 53D19 The first 2 numbers correspond to the body length (in dm). In this case: 5.3 m. The letter code indicates the number of axles: S - single axle, D - two axles, T - three axles. In this case: two axles. The 2 last numbers refers to the permissible maximum weight. In this case: 19 t. 47S16 53S16 53D19 58D22 62D24 Indicative payload (kg) (excl. option(s)) 11,400 11,500 13,350 15,450 17,800 Permissible max. weight (kg) 15,400 16,000 18,500 21,400 24,000 Indicative empty weight (kg) 4,000 4,500 5,150 5,950 6,200 Body length (m) Body width (front/rear) (m) 2.25/ / / / /2.30 Body height (m) Volume (m 3 ) Axle type single axle 1 x 100 / 8 single axle 1 x 110 / 10 bogie 2 x 100 / 8 bogie 2 x 100 / 8 bogie 2 x 110 / 10 Track (mm) 2,000 2,000 2,000 2,000 2,000 Brakes (mm) 400 x x x x x 80 Tipping cylinder volume (l)

7 Specific equipment on 47S16 XL and 53S16 XL Chassis made of 300 x 100 x 6 mm tubes Rigid drawbar Mechanical stand Tipping system with direct connection on the tractor (flexible tipping) Specific equipment on 53D19 XL to 62D24 XL Chassis made of 300 x 100 x 6 mm tubes (8 mm on D22 and D24) Sprung drawbar Hydraulic stand Tipping system with direct connection on the tractor (flexible tipping) Specific equipment on high-tipping trailers 53D19 to 62D24 XL and 53D19 to 73D29 XXL (to replace the corresponding standard equipment) 2 grain hatches (width: 500 mm) 2 removable chutes Tipping by compressor Lifting through tractor hydraulics

8 GOLD2 XXL RANGE BODY HEIGHT: 1.50 M Standard equipment on Gold 2 XXL tipping trailers Tapered monocoque body (ST420 high tensile steel - 4 mm) 1-part hydraulic door (with seal) Multi-position central grain chute of 500 x 500 mm (width x height) Sight window on body (with perspex and galvanized protective grating) Galvanized access ladder LED flash light (flashing beacon on lighting) Hydraulic brakes Wheels 400R22.5 (handling wheels) Understand the model names: Example: 53D19 The first 2 numbers correspond to the body length (in dm). In this case: 5.3 m. The letter code indicates the number of axles: S - single axle, D - two axles, T - three axles. In this case: two axles. The 2 last numbers refers to the permissible maximum weight. In this case: 19 t. 53D19 58D22 62D24 67D24 67D26 Indicative payload (kg) (excl. option(s)) 13,350 15,450 17,550 16,740 19,040 Permissible max. weight (kg) 18,500 21,400 24,000 24,000 26,000 Indicative empty weight (kg) 5,300 6,340 6,450 7,260 7,260 Body length (m) Body width (front/rear) (m) 2.25/ / / / /2.30 Body height (m) Volume (m 3 ) Axle type bogie 2 x 100 / 8 bogie 2 x 100 / 8 bogie 2 x 110 / 10 bogie 2 x 110 / 10 free steering tandem with rods 2 x 130 / 10 Track (mm) 2,000 2,000 2,000 2,000 2,100 Brakes (mm) 350 x x x x x 120 Tipping cylinder volume (l)

9 Specific equipment on 53D19 XXL to 62D24 XXL Chassis made of 300 x 100 x 6 mm tubes (8 mm on 58D22 and 62D24) Sprung drawbar Hydraulic stand Tipping system with direct connection on the tractor (flexible tipping) Specific equipment on 67D24 XXL Chassis made of 300 x 100 x 8 mm tubes Sprung drawbar Hydraulic stand Tipping by 1,000 rpm compressor Specific equipment on 67D26 to 85T32 XXL Chassis made of 300 x 100 x 10 mm tubes Sprung drawbar Hydraulic stand Tipping by compressor: 1,000 rpm Rear free steering axle 73D26 73D29 79T32 85T32 18,400 21,600 22,500 21,900 26,300 29,000 32,000 32,000 7,900 8,000 9,500 10, / / / / free steering tandem with rods 2 x 130 / 10 free steering tandem with rods 2 x 150 / 10 free steering tandem with rods 3 x 130 / 10 free steering tridem 3 x 130 / 10 2,100 2,100 2,100 2, x x x x

10

11 New Tipping Trailer GOLD

12 OPTIONS High-tipping trailer Compressor: 28, 57, 85 l/min (1,000 rpm) Rear free steering axle Air brakes with automatic corrector Self steering axle with emitter cylinder Dual braking system: hydraulic and air brakes TIPPING ANGLE On single and double-axle models, the hydraulic ram, which is located on the rear part, provides a higher tipping angle (up to 55 ). On bigger models, the hydraulic ram is located in the middle of the chassis and ensures a perfect stability.

13 Steel or alu extensions: cm Thermoplastic mudguards up to 1 m of extensions 2 grain hatches / removable chute Double hydraulic stand Rear working light Weight transfer Rear hook Ø 80 mm hitch type Scharmüller A FINISHING QUALITY MEETING YOUR REQUIREMENTS

14 TYRES Ref. Dimensions Holes Profile Brand 47S16 53S16 53D19 58D22 62D24 67D24 67D26 73D26 73D29 79T32 85T /65R CY1 Y1 INT Retread X 3 425/65R Y1 INT Retread X X 3 445/65R / 10 Y1 INT Retread X V V V X 4 445/65R F AR-01 TL Mitas X X V V V V V 1 550/45x cord plies 153 A8 328 Alliance X 1 550/60x Flotation V Line BKT X X X 1 550/60x / 10 A A8 Alliance X X X X 9 560/60R / 10 FL 630 STB 161 D BKT X X X X X X 5 560/60R / D Cargo XBIB Michelin X X V V V V V 8 560/60R / D Twin Radial Trelleborg X X V V V V V 7 560/60R / D AR-02 TL Mitas X X X X X 6 560/60R E A380 Alliance X X X V V V V V 8 580/65R D Twin Radial Trelleborg X V V V V V 2 580/65R A D Alliance X X X X X X 6 600/55R / E A380 Alliance X X X V V V V V 5 600/55R D Cargo XBIB Michelin X V V V V V 8 600/55R D Twin Radial Trelleborg V X V V V 6 600/55R E A380 Alliance V V V V V 6 650/55R E A380 Alliance V V V V 6 650/60R A 380 Alliance X X 6 650/55R D FL 630 Super BKT X X X X 6 650/55R A885 SB 170 D Alliance X X X X 8 680/55R D Twin Radial Trelleborg X X X: available for 25 km/h V: available for 25 and 40 km/h

15 3 1 2 A QUALITY SERVICE... A MANUFACTURER AT YOUR SERVICE CONTACT: MAGASIN@LEBOULCH.COM - SAV@LEBOULCH.COM SERVICE A reactive and professional after-sales service: thanks to its extensive dealers network, the Leboulch after-sales service quickly intervene at your place to avoid a long downtimes. Our After-Sales department also manages the warranty of the equipment and the availability of spare parts. sav@leboulch.com SPARE PARTS BOOK & USER'S MANUAL Unique and linked to your machine, the spare parts book and user s manual are delivered with your machine. They include all parts, make orders easier and enhance a quality maintenance. Qualité et tradition! Les photos et illustrations ne correspondent pas nécessairement aux équipements standards et achetés. MANUEL D'UTILISATION Bennes GOLD XXL Edition : Janvier FR Qualité et tradition! LIVRE DE PIÈCES EVII A WAREHOUSE MEETING YOUR EXPECTATIONS Our warehouse is fitted with Kardex carousels for an optimal storage and a fast delivery of the spare parts. A technician will help you to find the parts you need. magasin@leboulch.com Route de Guernanville LA VIEILLE LYRE - France tel : +33 (0) fax : +33 (0) commercial@leboulch.com A LIRE ATTENTIVEMENT AVANT D'UTILISER LA MACHINE Fabrication française FR Go d xx 72D29 bennée couv v e p èce bennes JLB GOLD XXL Route de Guernanville, LA VIEILLE LYRE - FRANCE tél. : +33 (0) fax : +33 (0) commercial@leboulch.com Nom Date GOLD XL GOLD XXL MANUFACTURING QUALITY High tensile steel tubular chassis, Omega reinforcements, 2-component polyurethane paint after shot-blasting and phosphating, electrostatic paint are a quality guarantee for your machine.

16 Discover a multitude of products meeting your needs JOIN OUR FACEBOOK COMMUNITY Leboulch Non-contractual document. Data can change without notice. Pictures do not necessary correspond to the standard equipment. Route de Guernanville, La Vieille Lyre - FRANCE tel.: fax: +33 (0) commercial@leboulch.com