Trailers Catalogue AB Umega Tel. (389) Metalo 5, LT Utena Fax (389)

Transcription

1 Trailers Catalogue

2 SPA3-3 way tipping trailer Body frame: Body sides are made of profiled steel sheets, sides of 2 mm steel, body flor made of 3 mm steel. All body sides are removable; Chassis: Strong frame construction, mechanical jack. Hydraulic or pneumatic braking system; Technical specifications: SPA3 Maximum permissible load 3000 mass, kg Unladen weight, kg 1030 Volume, m³ - without upper sides, m³ 1,3 - with upper sides, m³ 3,8 Body length, mm 3000 Body width, mm 1500 Body height, mm Angle of tip, degrees 50 Standard tyres 10,0/75-15,3 - length, mm width, mm height, mm 1750 Paint: Sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Mudguards Tyres Colour

3 SPA7.5 type semi-trailer Body frame: Body made of profiled steel sheets, sides of 3 mm steel, body flor made of 4 mm steel. All body sides are removable; Chassis: the trailers are built on a double-axle chassis with tandem suspension, strong frame construction, mechanical jack. all wheel hydraulic or pneumatic braking system; Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Roll over cover Different types of bolted eyelet Mudguards Rear tow out points Tyres Colour Technical SPA7,5 SPA7,5R specifications: Maximum permissible load mass, kg Unladen weight, kg Volume, m³ - without upper 3,9 3,9 sides, m³ - with upper sides, 8,5 8,5 m³ Body length, mm Body width, mm Body height, mm Maximal tipped height, mm Load on coupling when the trailer fully laden, kg Standard tyres 11,5/80-15,3 11,5/80-15,3 Angle of tip, degrees length, mm width, mm height, mm

4 SPB type semi-trailers Body frame: made of profiled steel sheets, sides of 3 mm steel, body flor made of 4 mm steel. Body have a hydraulically operated lower 300 mm rear door. SPB16 standard equipment is chockabsorbing drawbar and hydraulic jack. Chassis: the trailers are built on a double-axle chassis with tandem suspension, strong frame construction, mechanical jack. all wheel hydraulic or pneumatic braking system; Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Roll over cover Different types of bolted eyelet Hydraulic jack Mudguards Rear tow out points Wheels Tyres Colour Technical specifications: SPB10 SPB10R SPB12 SPB12R SPB14 SPB16 Maximum permissible load mass, kg Unladen weight, kg Volume, m³ ,5 14, ,5 Body length (internal), mm Body width (internal), mm Body height, mm Height of upper sides, mm Maximal tipped height, mm Load on coupling when the trailer fully laden, kg Standard tyres 400/55-22,5 400/55-22,5 400/55-22,5 400/55-22,5 400/55-22,5 600/50-22,5 Angle of tip, degrees length, mm width, mm height, mm

5 SPT12-3 way tipping trailer Body frame: made of profiled steel sheets, sides of 3 mm steel, body flor made of 4 mm steel. Body have a hydraulically operated lower 300 mm rear door. All body sides are removable. Chassis: the trailers are built on a double-axle chassis with tandem suspension, strong frame construction, mechanical jack. all wheel hydraulic or pneumatic braking system; Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Technical specifications: Roll over cover Different types of bolted eyelet Hydraulic jack Mudguards Rear tow out points Wheels Tyres Colour SPT12 Maximum permissible load mass, kg Unladen weight, kg 3960 Volume, m³ 14,5 Body length, mm 4950 Body width, mm 2350 Body height, mm Load on coupling when the trailer fully 3000 laden, kg Standard tyres 400/55x22,5 - length, mm width, mm height, mm 2400

6 SPC type semi-trailers Body frame: made of profiled steel sheets, sides of 3 mm steel, body flor made of 5 mm steel. Body have a hydraulically operated rear door equipped with a grainshute. Side extensions (optional) are made of 2 mm steel; Chassis: the trailers are built on a double-axle chassis with tandem suspension, strong frame construction, mechanical jack. SPC16 standard equipment is chock- absorbing drawbar, hydraulic jack. all wheel hydraulic or pneumatic braking system; Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Roll over cover Different types of bolted eyelet Rear tow out points Mudguards Tyres Side extensions (300mm, 600mm) Colour Technical specifications: SPC10 SPC10R SPC12 SPC12R SPC14 SPC16 Maximum permissible load mass, kg Unladen weight, kg Volume, m³ 12,7 12,7 14,1 14,1 17,4 21,5 Body length (internal), mm Body width (internal), mm Body height, mm Maximal tipped height, mm Load on coupling when the trailer fully laden, kg Standard tyres 400/55-22,5 400/55-22,5 400/55-22,5 400/55-22,5 550/45-22,5 600/50-22,5 Angle of tip, degrees length, mm width, mm height, mm

7 SPC19 semi-trailer Body frame: monocoque tapered body made of profiled steel sheets, sides of 3 mm steel, body flor made of 5 mm steel. A body has a window and hydraulically operated rear door equipped with a grainchute. Chassis: the trailer is built on a double-axle chassis with tandem suspension, last self steering axle, strong frame construction, chock-absorbing drawbar with adjustable height, tipping stabilizers on both axles, hydraulic jack. all wheel hydraulic or pneumatic braking system; Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Roll over cover Different types of bolted eyelet Rear tow out points Mudguards Wheels 600/55-R26,5 Tyres Side extensions (300mm, 600mm, 1000 mm) Colour Technical specifications: SPC19 Maximum permissible load mass, kg Unladen weight, kg 6800 Volume, m³ 26 Body length, mm 7100 Body width, mm 2200 Body height, mm 1600 Angle of tip, degrees 50 Load on coupling when the trailer fully laden, kg 3000 Standard tyres 600/55x22,5 - length, mm width, mm height, mm 3100

8 SPC30 semi-trailer Body frame: monocoque tapered body made of profiled steel sheets, sides of 3 mm steel, body flor made of 5 mm steel, 600 mm side extensions are made of 2 mm steel. A body has a window and hydraulically operated rear door equipped with a grainchute. Chassis: a trailer is built on a triple-axle chassis with tridem suspension, first and last self steering axle, strong frame construction, chock-absorbing drawbar with adjustable height, tipping stabilizers on first and last axles, hydraulic jack. all wheel hydraulic or pneumatic braking system. Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Roll over cover Different types of bolted eyelet Rear tow out points Tyres Colour Technical specifications: SPC30 Maximum permissible load mass, kg Unladen weight, kg 9350 Volume, m³ - without upper sides, m³ 28 - with upper sides, m³ 39,5 Body height without upper sides (internal), mm 1590 Body height with upper sides (internal) 2190 Body width (internal front/back), mm 2150/2190 Body length (internal), mm 8170 Maximal tipped height, mm 9000 Angle of tip, degrees 50 Load on coupling when the trailer fully laden, kg 3000 Oil capacity required for a tipping, l 75 Standard tyres 600/55-22, length, mm width, mm height, mm 3700

9 SPD16 semi-trailer Body frame: body made of profiled steel sheets, sides of 8 mm steel, body flor made of 10 mm steel. A body has a hydraulically operated rear door. Chassis: jack. a trailer is built on a double-axle chassis with bogie suspension, strong frame construction, hydraulic all wheel hydraulic or pneumatic braking system. Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Tandem suspension Rear tow out points Hardox Tyres Colour Technical specifications: SPD16 Maximum permissible load mass, kg Unladen weight, kg 4900 Volume, m³ 7,3 Body length, mm 4500 Body width, mm 2400 Body height, mm 700 Angle of tip, degrees 50 Load on coupling when the trailer 3000 fully laden, kg Standard tyres 600/50-22,5 - length, mm width, mm height, mm 2250

10 Self-offloading grain trailer GPP23 Body frame: body made of profiled steel sheets, sides of 3 mm steel, body flor made of 5 mm steel. An auger hydraulically operated conveyor is used to move the grain out on either side of the trailer. A 23 m 3 trailer can be unloaded within two to three minutes. The trailers are provided (optional) with an electronic weighing scale that records and displays daily information on the grain handled. Chassis: the trailer is built on a double-axle chassis with tandem suspension, strong frame construction, hydraulic jack. all wheel hydraulic or pneumatic braking system. Paint: sandblasting, ground-coating and finaly electrostatical coating with bicomponent paints. Standard colours: chassis RAL 7043 (grey), body RAL Roll over cover Different types of bolted eyelet Electronic weighing-device Last self steering axle Tyres Colour Technical specifications: GPP23 Maximum permissible load mass, kg Unladen weight, kg 7500 Volume, m³ 17 Body length, mm 6000 Body width, mm 2450 Body height, mm 3000 Loading height, m 3 Unloading height, m 3,5...4,9 Auger diameter, mm 400 Shaft revolution, rpm 540/1000 Standard tyres 600/55x26,5 Load on coupling when the trailer fully laden, kg length, mm width, mm height, mm 3600