GF Sentry Series Infra-Red

Transcription

1 GF Sentry Series Infra-Red Salamander Broilers Parts List Models GFIR36C GFIR36 GFIR8 GFIR60 Document Number: G_GMD_PL_IRBROILER_GFIR (Rev 5 Updated 07/6)

2 Rating Plate Location Remove the drip tray to view the rating plate. Serial Number Explained (3-Digits, Year/Month Information) Sequential Number Factory Code Month Year Page

3 GF Sentry Series Infra-Red Salamander Broiler Contents: Rating Plate Location / Serial Number Explained (Year/Month Information) Components Rear Panel for 36in Model Rear Panel for 8in Model Rear Panel for 60in Model Optional Inter-Connect Gas Kit Revision History Page 3

4 COMPONENTS A A GF Series Page

5 ITEM PART # DESCRIPTION MODEL 36 36C 8 60 G Main Top Back G Main Top Centre 3 G Main Top Front 5700 MSR Burner (Required for North America / Export Models) CK7 SRC Burner Assembly (Required for Australia / CE Models) Flue Back 6 G Orifice Fitting Cover 7 G07- Front Bearing 8 F Washer Bearing Valve Housing Assy LH Valve Housing Assy RH Valve Housing Retainer 5998 Manifold Housing Bottom LH 5999 Manifold Housing Bottom RH Bottom Cover Used for GFIR36C Models ONLY Front Brace 0300 Cnt. Sunk /8 NPT Hex Plug 5 G05- Pressure Test Spigot Manifold Assembly 7 G077-9 Nipple / NPT x 8 Long Sub-Manifold Assembly 9 G07- Elbow - / NPT 0 G077-0 Nipple / NPT x -/ Long Front Frame CK5770 GFIR Series Salamander Knob Assembly C GFIR Salamander Handle 50 Door Handle End (Universal Left/Right Hand) Door Handle End Insulator (Universal Left/Right Hand) Rack Veneer Grease Tray Grease Tray Front 9 G0- Large Roller Bearing Rack Frame & Grease Chute Assembly 30A* 5069 Rack (Double Sided - Half Round/Diamond) 3 G07-3 Rear Bushing G Roller Guide Assembly R/H 3 G Roller Guide Assembly L/H 33 G077- Nipple / NPT x -/8 Long 5678 Cover Plate Cover Plate AGA Nameplate Large- GARLAND 36 G067-5 Pilot Burner C G067- Pilot Orifice Fitting - Natural Gas C 36A G067-3 Pilot Orifice Fitting - Propane Gas C 37 G Pilot Bracket * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Note: Propane option has been discontinued since September, 03. CRITICAL Page 5

6 ITEM PART # DESCRIPTION MODEL 36 36C 8 60 G0-8 Orifice Fitting #8 Natural (North America) C G0- Orifice Fitting Propane.MM (North America ) C Orifice Fitting -.6MM Natural (CE) C Orifice Fitting -.MM Propane (CE) C 38 Orifice Fitting -.MM Natural Gas (AUSTRALIA) C G0-XX Orifice Fitting -.MM Propane Gas (AUSTRALIA) C Orifice Fitting -.7MM Natural Gas (EXPORT) C Orifice Fitting -.MM Propane Gas (EXPORT) C Side Liner - Right Hand Side Liner - Left Hand Main Side R/H (S/S) Main Side L/H (S/S) G076- Tee / NPT G Post Bearing / Dia x / Long 7500 Regulator 3/" Propane Gas 0IN W/C (North America/Export) C 750 Regulator 3/" Natural Gas.0IN W/C (North America/Export) C 3 - Regulator 3/" ISO Natural Gas.5IN W/C - (CE/AUSTRALIA) (Not supplied) - Regulator 3/" ISO Propane Gas 0IN W/C - (CE/AUSTRALIA) (Not supplied) 6000 Heat Shield Front S/S Heat Shield Bottom S/S /6 Dia Tubing Valve - Orifice Left (Used UP TO June, 06) /6 Tubing Valve - Orifice Left (Used FROM June 5, 06) Flame Failure Valve C Valve Connector Fitting 0mm C Valve Extension Block 5 G Valve-Pilot / 90º 53 G03- Fitting 7-6 CC x / NPT C /6 x 6 Dia Tubing Valve - Orifice Right (Used UP TO June, 06) 500 7/6 Tubing Valve - Orifice Right (Used FROM June 5, 06) / Dia Tubing Pilot - Flame Failure Right (Used UP TO June, 06) / Tubing Pilot FF Valve RT (Used FROM June 5, 06) Thermocouple 3 / C M8 X Brass Nut - Thermocouple C Thermocouple Support Bracket - Left / Right / x 8 Dia Tubing Pilot - Flame Failure Left (Used UP TO June, 06) 60 / Tubing Pilot - Flame Failure Left Salamander (Used FROM June 5, 06) * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Note: Propane option has been discontinued since September, 03. CRITICAL Page 6

7 Range Mount Components to Install Salamander 36 Model Rear Panel ITEM PART# DESCRIPTION QTY GFIR 36" Standard Back GFIR 36" Standard Back - S/S Upright Veneer Salamander - S/S Upright GF Series Salamander - GALVANIZED 536 Salamander Support Left Hand - GALVANIZED Salamander Support Right Hand - GALVANIZED " High Shelf Front Panel - S/S * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 7

8 Range Mount Components to Install Salamander 8 Model Rear Panel ITEM PART# DESCRIPTION QTY Rear Panel GFIR8 - GALVANIZED GFIR 36" S/S Back " Salamander Anti-Sway Bracket 5596 Upright Right Hand GFIR8 - GALVANIZED Upright Left Hand GFIR8 - GALVANIZED Centre Support GFIR8 - GALVANIZED Salamander Support Left Hand - GALVANIZED Salamander Support Right Hand - GALVANIZED Front Panel GFIR8 - S/S * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 8

9 Range Mount Components to Install Salamander 60 Model Rear Panel ITEM PART# DESCRIPTION IN High Shelf Salamander Back Standard - GALVANIZED 5395 IN High Shelf Salamander Back - S/S GFIR 36" Series Back - GALVANIZED GFIR 36" Series Back S/S 53 Upright High Shelf - GALVANIZED " SHELF S/S 536 Salamander Support Left Hand - GALVANIZED Salamander Support Right Hand - GALVANIZED Salamander/High Shelf Support Bracket - Salamander Left Hand Upright Veneer Salamander - S/S Upright GF Series Salamander - GALVANIZED " HIGH SHELF FRONT PANEL SALAMANDER LEFT HAND - S/S " HIGH SHELF FRONT PANEL SALAMANDER RIGHT HAND - S/S 9 60" BROILER/GRIDDLE FRONT PANEL SALAMANDER LEFT HAND S/S * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 9

10 OPTIONAL INTER-CONNECT GAS KIT FOR 36 RANGE The gas supply of the range mounted salamanders may be inter-connected with the supply of the range, so both units are supplied from a single gas connection. The supply gas piping should be a minimum of (5mm) diameter to ensure enough gas capacity is available at the specified pressure to supply the total combined input rating of both appliances. The components comprising the optional inter-connect kit are shown below. Optional Interconnect Gas Kit # Version, Connecting to a 36in Range 5 CUT TUBING (ITEM ) TO SIZE AS REQUIRED TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR MANIFOLD INLET CONNECTION 8 TO INLET OF SALAMANDER/ CHEESEMELTER MANIFOLD REGULATOR - 6.0"w.c. NATURAL GAS OR 0.0"w.c. PROPANE GAS (SUPPLIED WITH SALAMANDER/ CHEESEMELTER) SUPPLIED WITH RANGE 3 REGULATOR -.5" w.c. NATURAL GAS ATTACH SUPPORT CLAMP (ITEM ) OR 0.0" w.c. PROPANE GAS TO SUPPORT BRACKET ( ITEM ) (SUPPLIED WITH RANGE) WITH ()#0- SELF-TAPPING SCREWS (ITEM F3 - NOT SHOWN) PROVIDED. SUPPLIED WITH RANGE TO INLET OF RANGE MANIFOLD MARK HOLE LOCATIONS AND MOUNT SUPPORT BRACKET (ITEM ) TO RANGE BACK WITH ()#0-6 TEKS SELF-DRILL/TAP SCREWS (ITEM - F67 - NOT SHOWN) PROVIDED " NPT GAS SUPPLY CONNECTION ITEM PART# DESCRIPTION QUANTITY W.C 3/ NPT, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE / ISO 7-, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE W.C 3/ NPT, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE / ISO 7-, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE G0738- NIPPLE, 3/ NPT X / (ONE SUPPLIED WITH RANGE) 3 3 G07-5 ELBOW, 90DEG, 3/ NPT (ONE SUPPLIED WITH RANGE) G0963- UNION, 3/ NPT / CC X 3/ NPT STRAIGHT FITTING BRACKET, PIPE SUPPORT CLAMP, PIPE SUPPORT BRACKET 8 G07-9 REDUCING ELBOW, 90DEG, 3/ NPT X / NPT 9 G NIPPLE, 3/ NPT X G0376- REDUCING TEE, 3/ NPT X 3/ NPT X F67 SCREW, #0-6 X / HEX, WASHER HEAD, TEKS SELF-DRILL/TAP (NOT SHOWN) F3 SCREW, #0- X / PAN HEAD, SELF-TAP, TYPE F (NOT SHOWN) W.C 3/ NPT, REGULATOR NATURAL GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER W.C 3/ NPT, REGULATOR PROPANE GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER G738- NIPPLE, 3/ NPT X TUBING 3/ Page 0

11 OPTIONAL INTER-CONNECT GAS KIT FOR 8 /60 RANGE Optional Interconnect Gas Kit # Version, Connecting to a 8in or 60in Range NOTE: CUT TUBING (ITEM ) TO SIZE AS REQUIRED TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR MANIFOLD INLET CONNECTION TO INLET OF SALAMANDER/ CHEESEMELTER MANIFOLD FOR LEFT-MOUNTED SALAMANDER/CHEESEMELTER SUBSTITUTE COMPONENTS SHOWN FOR ITEM 7 CIRCLED IN ADJACENT VIEW REGULATOR - 6.0"w.c. NATURAL GAS OR 0.0"w.c. PROPANE GAS (SUPPLIED WITH SALAMANDER/CHEESEMELTER) 0 TO INTER-CONNECT TUBING ( ITEM ) 7 ATTACH SUPPORT CLAMP (ITEM ) TO SUPPORT BRACKET (ITEM ) WITH () #0- SELF-TAPPING SCREWS (ITEM F3 - NOT SHOWN) PROVIDED 6 7 SUPPLIED WITH RANGE SUPPLIED WITH RANGE TO INLET OF RANGE MANIFOLD 6 9 MARK HOLE LOCATIONS AND MOUNT SUPPORT BRACKET (ITEM ) TO RANGE BACK WITH () #0-6 TEKS SELF-DRILL/TAP SCREWS (ITEM - F67 - NOT SHOWN) PROVIDED. 3 TO OUTLET OF SALAMANDER/ CHEESEMELTER REGULATOR REGULATOR -.5"w.c. NATURAL GAS OR 0.0"w.c. PROPANE GAS (SUPPLIED WITH RANGE) ATTACH SUPPORT CLAMP (ITEM ) TO SUPPORT BRACKET (ITEM ) WITH () #0- SELF-TAPPING SCREWS (ITEM F3 - NOT SHOWN) PROVIDED MARK HOLE LOCATIONS AND MOUNT SUPPORT BRACKET (ITEM ) TO BACK WITH () #0-6 TEKS SELF-DRILL/TAP SCREWS (ITEM - F67 - NOT SHOWN) PROVIDED. 9 0 " NPT GAS SUPPLY CONNECTION QUANTITY ITEM PART# DESCRIPTION 8 / 60 F3 SCREW, #0- X / PAN HEAD, SELF-TAP, TYPE F (NOT SHOWN) 5.5 W.C NPT, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE 5509 ISO 7-, REGULATOR NATURAL GAS, SUPPLIED WITH RANGE 5 0 W.C NPT, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE ISO 7-, REGULATOR PROPANE GAS, SUPPLIED WITH RANGE W.C 3/ NPT, REGULATOR NATURAL GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER W.C 3/ NPT, REGULATOR PROPANE GAS, SUPPLIED WITH SALAMANDER/ CHEESEMELTER NIPPLE, NPT X (ONE SUPPLIED WITH RANGE) 3 5 G738-5 NIPPLE, 3/ NPT X G07-5 ELBOW, 90DEG, 3/ NPT ELBOW, 90DEG, NPT (SUPPLIED WITH RANGE) UNION, NPT BRACKET, PIPE SUPPORT 8/ CLAMP, PIPE SUPPORT BRACKET REDUCING TEE, NPT X NPT X 3/ G NIPPLE, 3/ NPT X.75 3 G0738- NIPPLE, 3/ NPT X F67 SCREW, #0-6 X / HEX, WASHER HEAD, TEKS SELF-DRILL/TAP (NOT SHOWN) 5 G0738- NIPPLE, 3/ NPT X G07-9 REDUCING ELBOW, 90DEG, 3/ NPT X / NPT / CC X 3/ NPT STRAIGHT FITTING TUBING 3/ Page

12 REVISION HISTORY (GFIR) REV BY PAGE/ITEM NOTES DATE 0 CM NEW BOOK - MODEL: GFIR SERIES INFRA-RED SALAMANDER BROILER MAY 0/0 CM,3 FIXED FRONT PAGE MODELS NAME OCT 6/0 p. Added serial# info, rating plate loc. pp.7-8 New gas interconnect kits PCO 06579/0703 MAY 08/ HH pp.-6 # #6, 8, 38, 39,, 3, 7, 5, 55, 57, 58 New part numbers. MAY 3/ p.5 #6 Incorrect P/N. Should be G p.5 # , qty=, all models (was 0) 3 HH p.5 #3 Added Used on units for Australia. p.6 #3 750 Regulator, pressure should be.0 WC. DEC 8/5 p.5, 6 Added Note: Propane option has been discontinued since September, 03. Ref: Bulletin GAR_SB_0008 (Nov, 05) HH p.6 #8 New FF valve, direct replacement. Was ECO-00037G p.6 #38 Corrected P/N and descriptions. APR 7/6 5 HH p.6 #7, 5, 55, 58 Added new solid tubing ECO C JUL 5/6 Page

13 KitchenCare -8-7-CARE