Induction RTCSmp Hold-Line

Transcription

1 Induction RTCSmp Hold-Line Countertop and Built-In Heat Retaining Units Parts List Built-In Hold-Line Models HO/IN 00 HO/IN 450/900/1350/1800 HO/IN 800/1600/400/300 Countertop Hold-Line Model HO CARE Document Number: G_EC_PL_INDUCSRTCSmp_HOLDLINE rev 0 Updated: 7/17

2 Rating Plate Location HO 00 HO/IN 00 HO/IN 450/900/1350/1800 HO/IN 800/1600/400/300 Serial Number (S/N) Explained The serial number of your unit is listed on the rating plate. Example: IN Date Code: MMYY Sequential Number. See NOTE below. Last two() or three(3) digits of the product part number (Article Number) that can be found on the invoice and on the shipping slip. BA = Base Line Series (Counter-top Glass Cook-tops) IN = Built-In Series WO = Counter Wok Series MO = Module Line Series HO = Hold Line Series GR = Griddle Line Series NOTE: non-rtcs / RTCS / RTCSmp models A non-rtcs/rtcsmp unit has a 4-Digit Sequence Number. A RTCS or RTCSmp unit has a 5-Digit Sequence Number. A RTCSmp unit is indicated as such on the Rating Plate. Nomenclature and Models Series built-in Power (Watt) Models HO = Hold Line IN = Built-In Line HO 00 HO/IN 00 HO/IN 450/900/1350/1800 HO/IN 800/1600/400/300 Updated: 7/17 Garland Induction RTCSmp Hold-Line

3 Table of Contents Rating Plate Location Serial Number (S/N) Explained Nomenclature and Models REVISION HISTORY (Induction RTCSmp Hold-Line) Built-In Hold-Line HO/IN 450/900/1350/ Built-In Hold-Line HO/IN 800/1600/400/ Built-In Hold-Line HO/IN Countertop Hold-Line HO Repair Accessories Recommended Stock Parts REVISION HISTORY (Induction RTCSmp Hold-Line) REV 0 1 MODEL or page/item , , , , ITEM# NOTES DATE BY New Release 5-JUNE/14 HH Updated - serial number info, repair accessories Checked art. nr., from our system QAD: , use for 10V HO/IN , use for 30V HO/IN , use for 08V HO/IN , use for 30V HO/IN300 Added photo for RJ45 cable Other RJ45 cables used in other models are different. ALL 1.8 / 3. KW MODELS P.5, P.7 13 Remove quantity as confusing. Qyt in description HO/IN 1800/ replaced by / 1739/ 1763/ 1747 HO/IN 300-GN P.7 Added notes on power module part#. No complete parts list for article no NOV/14 13-JUL/17 HH HH Garland Induction RTCSmp Hold-Line Updated: 7/17 3

4 Built-In Hold-Line HO/IN 450/900/1350/1800 Back 7 1 Front Back 13 Front 14 Parts Breakdown - HO IN 1800 and Updated: 7/17 Garland Induction RTCSmp Hold-Line

5 Induction RTCSmp Built-In Hold-Line 1.8kW Models models HO/IN 450 (1 Generator, 1 Heat Retaining Plate, 1 Control) HO/IN 900 (1 Generator, Heat Retaining Plates, Controls) HO/IN 1350 (1 Generator, 3 Heat Retaining Plates, Controls) HO/IN 1800 (1 Generator, 4 Heat Retaining Plates, Controls) 10V Induction Generator: 1.8kW 50/60Hz 1Phase 16A, Article No V Induction Generator: 1.8kW 50/60Hz 1Phase 8A, Article No ^ + + Qty Item Description Part Number R/C* 10V 30V 1 Mains Line Filter 16A - CSA Capacitor Board (Print I164b 1-4 / 1.8kW, 10V) Capacitor Board (Print I164b 1-4 / 1.8kW, 30V) Fuse TA R/C 4 Fuse T1A R/C Power Module, Complete (No parameters. Tech has to set parameters on site. Use / ) V: Power Module, Complete with Parameters. HO/IN RTCSMP 30V 1N 1.8KW R/C 10V: Power Module, Complete with Parameters. HO/IN RTCSMP 10V 1N, 1.8KW R/C 6 RJ-45 Print 119 (Quantity = ) R/C 7 RTCSmp Hold-Line Board (Print I133) degree Fahrenheit RTCSmp Hold-Line Board (Print I133) degree Celsius Induction Coil #45.06, 10V Induction Coil # Sensor Unit, Round Coil (3xPT1k) R/C 10 Upper Part with Ceran Glass, Hold-Line, 3 x 3mm, Up to 4 Heat Plates per unit TO 4 1 TO 4 11 Digital Display Board under Ceran Glass, Print I160c, One per Heat Plate TO 4 1 TO 4 1 Axial Fan 4V DC R/C 13 Print I161a D-Sub, Hold-Line, Qty=4 per Generator, Qty=1 per Heat Plate R 14 Plastic Knob, Plain, One per Control, Up to Controls per Unit TO 1 TO R RJ-45 Connecting Cable, Connect Control to Generator, 3-meter, 1 per TO R Operation Unit. RJ-45 Connecting Cable, Connect Control to Generator, 3-meter, 1 per TO R Operation Unit. 0 Complete Generator Asm., RTCSmp HO/IN 1800, 10V Complete Generator Asm., RTCSmp HO/IN 1800, 30V Heat Retaining Plate Complete Assembly with Ceran Glass, RTCSmp Hold TO 4 Line 1800, 10V Heat Retaining Plate Complete Assembly with Ceran Glass, RTCSmp Hold TO 4 Line 1800, 30V Operation Unit/Control, RTCSmp Hold-Line 1800/300, Qty=1 for every Heat Plates TO 1 TO C ^ Revised + New * R=Recommended Stock Part / C=Critical Part Garland Induction RTCSmp Hold-Line Updated: 7/17 5

6 Built-In Hold-Line HO/IN 800/1600/400/300 Back 7 1 Front Back 13 Front 14 Parts Breakdown - HO IN 1800 and Updated: 7/17 Garland Induction RTCSmp Hold-Line

7 Induction RTCSmp Built-In Hold-Line 3.kW Models models HO/IN 800 (1 Generator, 1 Heat Retaining Plate, 1 Control) HO/IN 1600 (1 Generator, Heat Retaining Plates, Controls) HO/IN 400 (1 Generator, 3 Heat Retaining Plates, Controls) HO/IN 300 (1 Generator, 4 Heat Retaining Plates, Controls) 08V Induction Generator: 3.kW 50/60Hz 1Phase 16.A, Article No V Induction Generator: 3.kW 50/60Hz 1Phase.0A, Article No Note: 30V HO/IN 300-GN, 1Phase, 3.kW, Article No For Power Module (item#5), use part ^ + + Qty Item Description Part Number R/C* 08V 30V 1 Mains Line Filter 16A CSA/CE Capacitor Board (Print I164b 1-4 / 3.kW, 08V) Fuse TA R/C 4 Fuse T1A R/C Power Module, Complete (No parameters. Tech has to set parameters on site. Use / ) V: Power Module, Complete with Parameters. HO/IN 300-GN RTCSMP 30V 3.KW R/C 08V: Power Module, Complete with Parameters. HO/IN GN RTCSMP 08V 3.KW R/C 6 RJ-45 Print 119 (Quantity =, 1 per Control Switch) R/C 7 RTCSmp Hold-Line Board (Print I133) degree Fahrenheit RTCSmp Hold-Line Board (Print I133) degree Celsius Induction Coil # Sensor Unit, HO/IN R/C 10 Upper Part with Ceran Glass, Hold-Line, 50 x 30mm, Up to 4 Heat Plates per unit TO 4 1 TO 4 11 Digital Display Board under Ceran Glass, Print I160c, One per Heat Plate TO 4 1 TO 4 1 Axial Fan 4V DC R/C 13 Print I161a D-Sub, Hold-Line, Qty=4 per Generator, Qty=1 per Heat Plate R 14 Plastic Knob, Plain, QTY=1 per Control, Up to Controls per Unit TO 1 TO R RJ-45 Connecting Cable, Connect Control to Generator, 3-meter, 1 per TO R Operation Unit. RJ-45 Connecting Cable, Connect Control to Generator, 3-meter, 1 per TO R Operation Unit. 0 Complete Generator Asm., RTCSmp HO/IN 300, 08V Complete Generator Asm., RTCSmp HO/IN 300, 30V Heat Retaining Plate Complete Assembly with Ceran Glass, RTCSmp Hold TO 4 Line 300, 08V Heat Retaining Plate Complete Assembly with Ceran Glass, RTCSmp Hold TO 4 Line 300, 30V Operation Unit/Control, RTCSmp Hold-Line 1800/300, Qty=1 for every Heat Plates TO 1 TO R ^ Revised + New * R=Recommended Stock Part / C=Critical Part Garland Induction RTCSmp Hold-Line Updated: 7/17 7

8 Built-In Hold-Line HO/IN B 5 9A 9C 8, Parts Breakdown Hold Line 00 8 Updated: 7/17 Garland Induction RTCSmp Hold-Line

9 Induction RTCSmp Built-In Hold-Line 1.5kW Models models HO/IN 00, 1.5kW, 10V, 50/60Hz, 1Phase, Article. No HO/IN 00, 1.5kW, 30V, 50/60Hz, 1Phase, Article No Item Description Part Number 10V Qty 30V R/C* ^ + 1 Fuse T1A R/C Fuse TA R/C 10V: Power Module, Complete, 1.5kW (No parameters. Technician has to set parameters on site. Use ) R/C 3 10V: Power Module, Complete, 1.5kW Already programmed with voltage specific parameters R/C Power Module, Complete, 30V, 1.5kW R/C 4 Fan, Hold-Line, RTCSmp R/C 5 Digital Display Board (Print I160c) F Digital Display Board (Print I160c) F Relay Board, Hold-Line (Print I163a) Mains Cable USA with Plug type 5/A, 3x14 AWG Mains Cable EU with Plug A Grease Filter 00x 0x 1mm (Air Intake Filter) R 9B Filter Holder C Air Deflector Foot Assembly, Adjustable Screw Nut PG Screwed Cable Gland PG Housing with Glass, Hold-Line Ceran Glass, 400x 800x 4mm Sensor Unit R/C Coil Carrier with Coils 46.05/46.06, Hold-Line 10V Coil Carrier with Coils 46.01/46.0, Hold-Line 30V RTCSmp Hold-Line with IR Board (Print I133) Operation Unit, RTCSmp Install Hold Line R 3 Potentiometer with Connector Pol. (metal) R/C 4 Plastic Knob R 5 Cable, RJ-45 Connection 3-meter, UTP R Cable, RJ-45 Connection 1-meter, UTP R ^ Revised + New * R=Recommended Stock Part / C=Critical Part Garland Induction RTCSmp Hold-Line Updated: 7/17 9

10 Countertop Hold-Line HO Temperature Control, Field Air Exhaust Air Intake Filter Temperature Control, Field B 9A 9C 8, 11 ON/OFF Switch / Parts Breakdown Hold Line Updated: 7/17 Garland Induction RTCSmp Hold-Line

11 Induction RTCSmp Built-In Hold-Line 1.5kW Models models HO 00, 1.5kW, 10V, 50/60Hz, 1Phase, Article No HO 00, 1.5kW, 30V, 50/60Hz, 1Phase, Article No Item Description Part Number 10V Qty 30V R/C* ^ + 1 Fuse T1A R/C Fuse TA R/C 10V: Power Module, Complete, 1.5kW (No parameters. Technician has to set parameters on site. Use ) R/C 3 10V: Power Module, Complete, 1.5kW Already programmed with voltage specific parameters R/C 30V: Power Module, Complete, 1.5kW R/C 4 Fan, Hold-Line, RTCSmp R/C 5 Digital Display Board (Print I160c) F Digital Display Board (Print I160c) F Relay Board, Hold-Line (Print I163a) Mains Cable USA with Plug type 5/A, 3x14 AWG Mains Cable EU with Plug A Grease Filter 00x 0x 1mm (Air Intake Filter) R 9B Filter Holder C Air Deflector Foot Assembly, Adjustable Screw Nut PG Screwed Cable Gland PG Housing with Glass, Hold-Line Ceran Glass, 400x 800x 4mm Sensor Unit R/C Coil Carrier with Coils 46.05/46.06, Hold-Line 10V Coil Carrier with Coils 46.01/46.0, Hold-Line 30V RTCSmp Hold-Line with IR Board (Print I133) Rotary Knob, 1mm Diameter, No Marking R 19 Cover, Rotary Knob, No Marking Potentiometer with Cable, F1, Hold-Line R/C 1 Potentiometer with Cable F, Hold-Line R/C ^ Revised + New * R=Recommended Stock Part / C=Critical Part Garland Induction RTCSmp Hold-Line Updated: 7/17 11

12 Repair Accessories Photo Description Part Number IR Adapter Usage: To receive infrared signals from an induction cooker and communicate via a HyperTerminal, or equivalent, on a laptop or other mobile peripherals. Might require additional adapters (not provided) USB- RS3 Adapter Usage: To connect an IR Adapter ( ) to a computer/device that does not have any RS3 connector Heat Sink Compound P1. Usage: To mount IGBT or Print/Board onto a Heatsink Short Circuit (Service) Plug (RTCS only, Not for RTCSmp) Usage: To initialize CU sensors High Temperature Tape 16mm Usage, for example: To retain PTC(RTC) sensors; to be used as a temporary adhesive; to be used as a high temperature insulator for coil repair Silicone Glue PACTAN 7076 (for Installation) Wire Punch Down Tool Calibration or Test Plates: Use these plates to calibrate and verify pan detection settings. Calibration Plate, Ø 10mm, with Handle Calibration Plate, Ø 100mm, with Handle Calibration Plate, Ø 90mm, with Handle Calibration Plate, Ø 70mm, with Handle Updated: 7/17 Garland Induction RTCSmp Hold-Line

13 Recommended Stock Parts Part Number Description HO/IN1800 HO/IN300 HO/IN00 HO00 10V 30V 08V 30V 10V 30V 10V 30V Fuse TA Fuse T1A Power Module, Complete. HO/IN RTCSMP 30V IN 1.8KW Power Module, Complete. HO/IN RTCSMP 10V IN, 1.8KW Power Module, Complete. HO/IN 300-GN RTCSMP 30V 3.KW Power Module, Complete. HO/IN GN RTCSMP 08V 3.KW Power Module, Complete, 10V, 1.5kW Power Module, Complete, 30V, 1.5kW RJ-45 Print Sensor Unit, Round Coil (3xPT1k) Sensor Unit, HO/IN Sensor Unit Axial Fan 4V DC Fan, Hold-Line, RTCSmp Print I161a D-Sub, Hold-Line, Qty=4 on Generator, Qty=1 on a Heat Plate RJ-45 Cable, 3-meter, 1 per Operation Unit. 1 TO - 1 TO RJ-45 Cable, 3-meter, 1 per Operation Unit. - 1 TO 1 TO RJ-45 Cable, 1-meter, UTP Grease Filter 00x 0x 1mm (Air Intake Filter) Operation Unit, RTCSmp Install Hold Line 1 TO 1 TO 1 TO 1 TO Potentiometer with Connector Pol. (metal) Potentiometer with Cable, F1, Hold-Line Potentiometer with Cable F, Hold-Line TO 1 TO 1 TO 1 TO Plastic Knob, Plain, One per Control Rotary Knob, 1mm Diameter, No Marking Garland Induction RTCSmp Hold-Line Updated: 7/17 13

14 CARE