Summit Gas Convection Oven

Transcription

1 Summit Gas Convection Oven models SGM-00, SGM-200 for units built FROM: (serial#) TO: (serial#) xxxxx Phone (US & Canada): Fax (US & Canada): U_GO_PL_CONVECTION_SGM (Rev 6)

2 Rating Plate Location Units Built UPTO 3-MAR-20 Units Built FROM 0-APR-20 Door Motor Rating Plate (On the Inside of Lower Front Cover) Rating Plate (On the Outside of Left Body Side Panel) Model Number Explained SGM-00S SGM-00D SGM-200S SGM-200D SGM - 00 D S - Standard Depth D - Deep Depth 00 - Single Deck Double Deck U.S. Range Summit SGM Gas Convection Ovens Serial# (Year/Month Information) The Serial Number is 3 Digits long and is stamped on the Rating Plate Sequential Number Factory Code Month Year

3 Summit Gas Convection Oven models SGM-00, SGM-200 for units built FROM: (serial#) TO: (serial#) xxxxx Table of Contents Rating Plate Location / Model & Serial# Information Digital Controller Kits - Replacement Kits & Cooling Kits FASTRON Digital Control Panel & Components ELREHA Digital Control & Components Burner Package Door Components & Assemblies Oven Components Main Exterior Components List of Wiring Diagrams & Available Kits Bulletins Revision History This parts list is updated regularly. Please find the most current revision on our U_GO_PL_CONVECTION_SGM (Rev 6) Page 3

4 ON OFF HIGH PULSE TEMP START CANCEL TEMP HOLD LIGHT LOW COOK/HOLD SET SETBACK COOL DOWN TIME ACTUAL TEMP C 50F ~ - + DIGITAL CONTROLLER KITS - REPLACEMENT / COOLING KITS CONTROLLER REPLACEMENT KIT OPTIONS 2 3 COOLING KIT PACKAGES ** Not Required for Conversion Kit ** for convection ovens built before Jan, 204 with Elreha conversion kits/control system Ovens with Elreha Controller All Ovens Built Prior to October, 2007 All Ovens Built between Oct, Jan, KIT COMPONENTS Page 4 U_GO_PL_CONVECTION_SGM (Rev 6)

5 U.S. RANGE PARTS IDENTIFICATION FASTRON CONTROLLER REPLACEMENT KITS & ELREHA COOLING KITS ITEM PART# DESCRIPTION QTY CRITICAL FASTRON CONTROLLER REPLACEMENT KITS Summit 4 (40) Digital Controller Note: Use Kit (Item #4) Ref: Bulletin# GAR-02-4-AC. NLA + C Summit 45 (450) Digital Controller with Cook-N-Hold Note: Use Kit (Item #4) or (Item #5). Ref: Bulletin# GAR-02-4-AC. NLA + C Summit 45+ (455) Digital Controller with Cook-N-Hold and Core Probe Note: Use Kit (item #6). Ref: Bulletin# GAR-02-4-AC. NLA + C Controller Replacement/Converstion Kit (Gas) - from digital to manual control Note: This Kit is the ONLY OPTION available for any unit built before 3-March/2000. Controller Replacement Kit - USRange 45 (Gas/Electric), Elreha Note: Use this Kit for any unit manufactured after 0-April/2000. Kit includes a panel assembly with Elreha control, a relay board assembly, a cable, a bracket and instruction# Ref: Bulletin# GAR-02-4-AC. Controller Replacement Kit - USRange 45+ (Gas/Electric), Elreha Note: Kit includes a panel assembly with Elreha control, a relay board assembly, a cable, a bracket and instruction# Ref: Bulletin# GAR-02-4-AC. C C C COOLING KITS Not required for ovens with manual controls. These kits are for any oven built before Jan, 204 with Elreha conversion kit (items 5, 6) / Elreha control system. Ref: Bulletin# GAR-02-4-AC. Cooling Kit, Standard Depth Oven, with Elreha Control Note: Kit includes a duct assembly, a hole plug, a cover plate, and fastners. Also require Kit 5322 (item 9) for any oven built before October, Cooling Kit, Deep Depth Oven, with Elreha Control Note: Kit includes a duct assembly, a hole plug, a cover plate, and fastners. Also require Kit 5322 (item 9) for any oven built before October, Supplementary Cooling Kit Note: Only required for ovens built before October, 2007; use this kit with either 5320 (item 7) for standard depth or 532 (item 8) for deep depth oven. Kit includes a high limit assembly, a circuit board support, insulation, a finger guard, and fasteners. * NOT ILLUSTRATED RECOMMENDED STOCK PARTS + NLA = No Longer Available U_GO_PL_CONVECTION_SGM (Rev 6) Page 5

6 ON OFF PULSE TEMP START CANCEL HOLD TEMP LIGHT COOK/HOLD SET SETBACK HIGH LOW COOL DOWN TIME ACTUAL TEMP ~ - + (FASTRON) DIGITAL CONTROL PANEL & COMPONENTS MANUAL GAS Fastron Controller (Obsolete) (Obsolete) For Fastron controller replacement replacement kits, see p. 0-. kits, see p Elreha Controller See p VALVE BEHIND THIS PANEL 5 4A A 2A / 2B 22 B A (Wiring Diagrams) ( Wire Harnesses) Fastron Digital Control Components Page 6 U_GO_PL_CONVECTION_SGM (Rev 6)

7 U.S. RANGE PARTS IDENTIFICATION (FASTRON) DIGITAL CONTROL PANEL & COMPONENTS ITEM PART# DESCRIPTION QTY Cover - Upper Control Panel OLD MODEL, No Longer Available Cover - Upper Control Panel, SS Overlay Top Control Panel Gas, black 5268 Overlay Top Control Panel Gas, silver/gray 3 GF297 #0-24 x /2 Slotted Thumb Screw / Knurled Screw Control Panel Assembly - Summit 45 Keypad, with Light Note: Assembly Includes a S/S Panel, a Key-Pad Control and Overlay (item 4A). CK Control Panel Assembly - Summit 45+ Keypad, with Light Note: Assembly Includes a S/S Panel, a Key-Pad Control and Overlay (item 4A). 4A Overlay - Summit 45 with Light 9085 Overlay - Summit 45+ with Light Fluted Knob (Fast Control Knob) Potentiometer - Encoder C Core Probe (Meat Probe) - for IM45+ Control Only Core Probe Bracket - for IM45+ Control Only Bracket - Ignition Control for units with Fastron Control Relay Board PCB Assy C S3850 Relay Board Assembly Kit - 20V Note: Kit includes PCB Asm (9690/item ), transformer (9799/item 2A), A S385 bracket (9680/item B), nylon spacers and fasteners. Relay Board Assembly Kit V Note: Kit includes PCB Asm (9690/item ), transformer (9798/item 2B), bracket (9680/item B), nylon spacers and fasteners. B 9680 Bracket - Relay Board Assembly 2A 9799 Transformer 20V to 24VAC C 2B 9798 Transformer 208/240V to 24VAC C Nylon PCB Spacer Switch - Thermal Disc, Cooling Fan C Bracket - Thermal Disc Switch Cable Assembl y - Probe Extension (USE ONLY WITH ) Note: Used from Nov C Probe - RTD, Flange Mount (USE ONLY WITH ) Note: Used from Nov C Cover - Probe Connector Bracket - DSI Ignition Module DSI Ignition Module C /4 Spade To Rajh Type Adaptor Transformer - Class 2,20V to 24V (with Insulated Slip on Terminal), for 5V-unit C Transformer - 24VAC, for 208/240V-unit C 9820 Cooling Fan 20MM, 5V Note: Used UP To Sep C Polar Fan 5V Note: For Fan Installation, refer to Service Bulletin B S. C Cooling Fan 208V / 240V Note: Used UP To Sep C 670 Cooling Fan 208 / 240 V Note: For Fan Installation, refer to Service Bulletin B S. C * NOT ILLUSTRATED RECOMMENDED STOCK PARTS CRITICAL U_GO_PL_CONVECTION_SGM (Rev 6) Page 7

8 U.S. RANGE PARTS IDENTIFICATION (FASTRON) DIGITAL CONTROL PANEL & COMPONENTS ITEM PART# DESCRIPTION QTY Air Exhaust Duct - Standard Depth Air Exhaust Duct - Deep Depth Relay Bracket Slide Panel - Right Side, Mid Bracket - Upper Control Panel Mounting Ground Lug (208/240V module) 39* Main Wire Harness (in older units) Wire Harness - 5V 60Hz Gas 40* Wire Harness - 208/240V 60Hz Gas 4* Wire Harness - Relay Board 43* Harness - Control to Relay 44* Wire Harness - Core Probe, for IM45+ Control Only 45* Wire Harness - Lights 46* Wire Harness - Ignition Module (IPI/DSI) 50* Wiring Diagram 5V 60Hz Gas Fast Control Wiring Diagram 208/240V Gas Fast Control Note: Diagram part#s listed For Reference Only. Please contact Technical Service for assistance. * NOT ILLUSTRATED RECOMMENDED STOCK PARTS CRITICAL Page 8 U_GO_PL_CONVECTION_SGM (Rev 6)

9 Blank Page U_GO_PL_CONVECTION_SGM (Rev 6) Page 9

10 ON OFF HIGH PULSE TEMP START CANCEL TEMP HOLD LIGHT LOW COOK/HOLD SET SETBACK COOL DOWN TIME ACTUAL TEMP ~ - + (ELREHA) DIGITAL CONTROL PANEL & COMPONENTS MANUAL GAS 2 VALVE BEHIND THIS PANEL A 7 Fastron Controller (Obsolete) For Fastron controller replacement kits, see p. 4. Fastron Controller Elreha Controller A (Wiring Diagrams) (Wire Harnesses) Page 0 U_GO_PL_CONVECTION_SGM (Rev 6)

11 U.S. RANGE PARTS IDENTIFICATION (ELREHA) DIGITAL CONTROL PANEL & COMPONENTS ITEM PART # DESCRIPTION QTY 9850 Cover - Upper Control Panel, SS Overlay Top Control Panel Gas, black 5268 Overlay Top Control Panel Gas, silver/gray 3 GF297 #0-24 x /2 Slotted Thumb Screw / Knurled Screw Summit 45 Control Panel Assembly (Elreha) Note: Assembly includes a S/S Control Panel, a Summit 45 Overlay (item 4A), and a Key Pad Control(Membrane Switch) S/S Panel and Key Pad Not Sold Separately. Summit 45+ Control Panel Assembly Kit (Elreha) Note: Assembly includes a S/S Control Panel, a Summit 45+ Overlay (item 4A), and a Key Pad Control(Membrane Switch). S/S Panel and Key Pad Not Sold Separately. 4A Overlay - Summit 45, with Light, Elreha Overlay - Summit 45+, with Light, Elreha Fluted Knob (Fast Control Knob) User Interface Board / UI Board (Elreha) Potentiometer - Encoder C Core Probe (Meat Probe) - for Summit 45+ Control Only Core Probe Bracket - for Summit 45+ Control Only Bracket - Ignition Control/SRB, Elreha Relay Board / SRB - Digital Control, Elreha C 2A 9799 Transformer 20V to 24VAC C 2B* 9798 Transformer 208/240V to 24VAC C Nylon Spacers Switch - Thermal Disc, Cooling Fan C Bracket - Thermal Disc Switch Cable Assembl y - Probe Extension (USE ONLY WITH ) C Probe - RTD, Flange Mount (USE ONLY WITH ) C Cover - Probe Connector Bracket - DSI Ignition Module DSI Ignition Module C /4 Spade To Rajh Type Adaptor Transformer - Class 2,20V to 24V (with Insulated Slip on Terminal), for 5V-unit C Transformer - 24VAC, for 208/240V-unit C Polar Fan 5V Note: For Fan Installation, refer to Service Bulletin B S. C 670 Cooling Fan 208 / 240 V Note: For Fan Installation, refer to Service Bulletin B S. C Air Exhaust Duct - Standard Depth Air Exhaust Duct - Deep Depth Relay Bracket Slide Panel - Right Side, Mid 27 S3848 Relay Borad Assembly - Gas, Elreha Note: Assembly includes a mounting panel, relay board, personality module, transformer (9799), and fasteners Bracket - Upper Control Panel Mounting Ground Lug (208/240V module) Cable - UI/SRB 0.5M Elreha * NOT ILLUSTRATED RECOMMENDED STOCK PARTS CRITICAL U_GO_PL_CONVECTION_SGM (Rev 6) Page

12 U.S. RANGE PARTS IDENTIFICATION (ELREHA) DIGITAL CONTROL PANEL & COMPONENTS ITEM PART # DESCRIPTION QTY Personality Module on UI, Elreha Personality Module on Relay Board/SRB, Elreha Standoff Nylon, /4 dia. 4 40* Wire Harness - 5V 60Hz Gas Wire Harness - 208/240V 60Hz Gas 4* Wire Harness - Relay Board 44* Wire Harness - Core Probe, for Summit 45+ Control Only 45* Wire Harness - Lights 46* Wire Harness - Ignition Module (IPI/DSI) 50* Wiring Diagram 5V 60Hz Gas Fast Control Wiring Diagram 208/240V Gas Fast Control Note: Diagram part#s listed For Reference Only. Please contact Technical Service for assistance. * NOT ILLUSTRATED RECOMMENDED STOCK PARTS CRITICAL Page 2 U_GO_PL_CONVECTION_SGM (Rev 6)

13 Blank Page U_GO_PL_CONVECTION_SGM (Rev 6) Page 3

14 BURNER PACKAGE (Harnesses) Burner Package Page 4 U_GO_PL_CONVECTION_SGM (Rev 6)

15 U.S. RANGE PARTS IDENTIFICATION BURNER PACKAGE ITEM PART # DESCRIPTION QUANTITY CRITICAL Burner Pack - DSI MCO 60K Natural CK Burner Pack Converted - DSI MCO 80K Natural CK Burner Pack Converted - DSI MCO 60K Propane Orifice, DSI MCO 80K Natural #47 Note: Use with Burner Pack CK Orifice, DSI MCO 60K Propane #56 Note: Use with Burner Pack CK Manifold Pipe Ignitor - DSI Burner Pack C Flame Sensor DSI Burner Pack C Pressure Test Spigot DSI Ignition Module C Bracket - DSI Ignition Module /4 Spade To Rajh Type Adaptor Straight Connector Assembly - 3/8 NPT x 7/6 CC (Includes Nut & Ferrule) Tubing - Gas Valve to Manifold Bell Reducer - 3/4 to /2 NPT 9699 Tailpipe - Standard Tailpipe - Deep Union - /2" NPT, Black (old P/N ) Nipple - /2" NPT x 3", Black (old P/N ) /2" NPT x 90 Degree Elbow (old P/N ) 20 CK98999 Bracket, Gas Valve Mount 2C 4323 Close Nipple - /2" NPT x " Long (old P/N ) Gas Valve - Natural Gas, Dual w/ Shut 4" C Gas Valve - Propane Gas, Dual w/ Shut 0" C Hex Bushing /2 x 3/8 NPT Black (old P/N 03840) deg. Male Connector Assembly 7/6 CC x 3/8 NPT (includes a 7/6 CC Nut and a 7/6 CC Ferrule) 40* Wire Harness - Ignition Module (IPI/DSI) * NOT ILLUSTRATED RECOMMENDED STOCK PARTS U_GO_PL_CONVECTION_SGM (Rev 6) Page 5

16 DOOR COMPONENTS & ASSEMBLIES 2 3 2A 2B Assembly U.S. Range Assembly 22A 27 22B 9 2B 20 5 Chain Assembly A Door Switch Left Door Components Right Door Components U.S. Range Page 6 U_GO_PL_CONVECTION_SGM (Rev 6)

17 U.S. RANGE PARTS IDENTIFICATION DOOR COMPONENTS & ASSEMBLIES ITEM PART # DESCRIPTION QUANTITY Seal - Door, Bottom Seal - Door, Left & Right Seal - Door Top Center - Right Door Seal Center - Left Door Seal Mscr - TH - Phil 0-24 x 5/8" Stl ZP (for Center Seals) 6 2A Bracket - Door Stop L/H 2B Bracket - Door Stop R/H DOOR CHAIN COMPONENTS (ITEMS 3-8) Door Chain Assembly Note: Includes Items C Connecting Door Rod - Short Note: Item listed for reference only. Not Sold Separately Connecting Door Rod - Long Note: Item listed for reference only. Not Sold Separately Turnbuckle /4-20 with 4" Take Up Roller Chain # Connecting Link #40 4 DOOR SWITCH COMPONENTS AND KITS (ITEMS 9-27) Wire Harness - Door Micro Switch, Mechanical Control (SGM Converted) Wire Harness - Door Micro Switch, Digital Control. 9A Door Switch Wire Harness for Gold Corral High Temp Micro Switch C 20 Note: For units with Digital Controls Door Micro Switch - High Temp, High Current (SGM Converted) 2 C 2A 9250 Cam - Door Switch (cannot replace 5338) 2B 5338 Cam Assembly - Door Switch (Installed on any unit built after Jan-204, serial# Can be used to replace item# 2A(9250). 22A Bracket Door Switch Right 22B 479 Bracket Door Switch (Installed on any unit built after Jan-204, serial# ) Set Screw 0x 24x 3/8" Nut Hex Stl * Nut w/washer 6-32 KPS 2 26* MSCR-PH-6 32x32 ST ZP Kit, Door Switch, Mechanical Control (SGM Converted to Manual Control) For any unit built before Jan-204 / serial# Kit includes items 9 (P/N ), 20 (P/N 45975), 2B, 22B Ref: Bulletin# GAR-04-4-AC. Kit, Door Switch, Digital Control For any unit built before Jan-204 / serial# Kit includes items 9 (P/N ), 20 (P/N ), 2B, 22B. Ref: Bulletin# GAR-04-4-AC. * NOT ILLUSTRATED RECOMMENDED STOCK PARTS CRITICAL U_GO_PL_CONVECTION_SGM (Rev 6) Page 7

18 U.S. RANGE PARTS IDENTIFICATION DOOR COMPONENTS & ASSEMBLIES ITEM PART # DESCRIPTION QUANTITY CRITICAL LEFT & RIGHT DOOR COMPONENTS (Window / Solid) 30 CK Door Handle Assembly- Black Note: Assembly includes items 3, 32, Tube Door Plate - Door Handle 2 33* /4-20 x Carriage Bolt, Black Panel - Left Door (Solid) Panel - Left Door (Window) Panel - Left Door (Solid - Prison) 9240 Panel - Left Door (Window - Prison) Insulation - Left Door (Window) Insulation - Left Door (Solid) Oven Door Window - 3/6" Glass (Window Option) Weld Assembly Frame Left Door Extended Bearing Plate 38 CK Panel - Left Door Liner (Window) Note: For both Standard and Prison Models Panel - Left Door Liner (Solid) Note: For both Standard and Prison Models Plate - Door Bushing Extended Spacer - Door Hinge Door Hasp Bracket Weldment Assembly (Prison, Left Door) Plate - Door Hasp Back (Prison, Left Door) /8-6 x 3/4 Carriage Bolt (Prison, Left Door) 3 43* /8-6 Hex Nut Stl Zinc (Prison, Left Door) /8 x 3/4 Flat Washer Stl Zinc (Prison, Left Door) /8 x /64 x 3/32 Split Lock Washer, Stl Zinc (Prison, Left Door) /8" U.S. Range Nameplate (for non-prison Door) Panel - Right Door (Solid) Panel - Right Door (Solid - Prison) Panel - Right Door (Window) Insulation Right Door (Window) 9597 Insulation - Right Door (Solid) Weld Assembly Frame Right Door Extended Bearing Plate Panel - Right Door Liner (Solid) Note: For both Standard and Prison Models Panel - Right Door Liner (Window) * NOT ILLUSTRATED RECOMMENDED STOCK PARTS Page 8 U_GO_PL_CONVECTION_SGM (Rev 6)

19 ITEM PART # DESCRIPTION U.S. RANGE PARTS IDENTIFICATION Summit Gas Convection Ovens, SUMG-00/200 COMPLETE DOOR ASSEMBLIES LEFT DOOR - COMPLETE ASSEMBLIES (includes Left Door Components and the Left Door Center Seal) USR Complete Door Kit - Left (WINDOW) USR Complete Door Kit - Left (SOLID) RIGHT DOOR - COMPLETE ASSEMBLIES (includes Right Door Components and the Right Door Center Seal) USR Complete Door Kit - Right (WINDOW) USR Complete Door Kit - Right (SOLID) * NOT ILLUSTRATED RECOMMENDED STOCK PARTS U_GO_PL_CONVECTION_SGM (Rev 6) Page 9

20 OVEN COMPONENTS Oven Components Page 20 U_GO_PL_CONVECTION_SGM (Rev 6)

21 U.S. RANGE PARTS IDENTIFICATION OVEN COMPONENTS ITEM PART # DESCRIPTION QTY CRITICAL Channel - Upper Hinge Channel - Lower Hinge Cover - Burner Box Front Cover - Lower Front Trim Oven Rack Guide - 0 Positions, Standard Oven Rack Guide - 0 Positions, Deep Oven Rack - Standard Oven Rack - Deep Oven Rack Clip Light Bulb - 40W Light Socket Gasket Lamp Socket - Porcelain Glass, High Temp Cover, Light Box Light Box Plate, Light Box Patch - Porcelain (no oven lights option) Fan Cover 2 CK Fan Cover Duct, Left 22 CK Fan Cover Duct, Right /4-20 x 3/8 Allen Head Screws Oven Vent Cap - 60K BTU Oven Vent Cap - 80K BTU Fan Duct Restrictor - 60K BTU Fan Duct Restrictor - 80K BTU 29 G P Blower Inlet Cover 30 G P Blower Wheel Assembly Plated Plate, Motor Pocket Front Insulation - Motor Pocket Motor Pocket Back 34 CK96499 Motor Pocket Assembly * 6867 Motor 3/4 HP, 5V, 2 Speed Motor 3/4 HP, 208/240V, 2 Speed CK Motor Assembly - 2 Speed - 5V C CK00309 Motor Assembly - 2 Speed - 208/240 V C Fire Plate - Standard depth Fire Plate - Deep depth 336 Convection Oven Insulation Kit - Standard 3364 Convection Oven Insulation Kit - Deep Size * NOT ILLUSTRATED RECOMMENDED STOCK PARTS U_GO_PL_CONVECTION_SGM (Rev 6) Page 2

22 MAIN EXTERIOR COMPONENTS Door 3 Motor LEFT SIDE VIEW REAR VIEW 7 U.S. Range DOUBLE DECK with VENT KITS and LEGS Exterior Compnents Page 22 U_GO_PL_CONVECTION_SGM (Rev 6)

23 U.S. RANGE PARTS IDENTIFICATION MAIN EXTERIOR COMPONENTS ITEM PART # DESCRIPTION QTY CRITICAL Cover - Main Top, SS Cover - Body Side, Left, SS Cover - Body Side, Right, SS Cover - Control Panel, Right, SS Cover - Control Panel, Right (Prison Package) Cover - Control Panel, Left, SS Cover - Lower Front Trim, SS 6A* #0-24 x 3/4 Machine Screw-Th-Phl (for Lower Front Trim Cover) Cover - Upper Front Trim, SS 7A* #0 x /2 Machine Screw-Th-Phl-B Stl 2P (for Upper Front Trim Cover) Vent Assembly - Outer (Standard or Deep) Vent Assembly - Standard Vent Assembly - Deep 0 CK Flue Assembly for Double Deck Note: Kit includes sheet metal flue channels (part# 92000, ) and fasteners (800206) Direct Vent Kit (for single or double deck) Note: Kit includes Flue Adapter Plate (95300), Direct Vent Bell (9000), and fasteners (800208) Leg - Single Deck, SS, for Casters, approx. 9-3/ Leg - Single Deck, SS, for Foot Inserts, 24" Leg - Double Deck, SS /2" Square Foot Insert - Chrome Plated Flanged Foot Insert (Optional Feature) Caster Insert (Single Deck Only) Caster - 4" Swivel without Brake, 3/4NPT Caster - 4" Swivel with Brake, 3/4NPT Heavy Duty Caster - 5 Swivel without Brake, for Double Deck Heavy Duty Caster - 5 Swivel with Brake, for Double Deck Kit - Casters 3" Swivel without Brake (low profile) Note: Kit Includes Two Casters Kit - Casters 3" Swivel with Brake (low profile) Note: Kit Includes Two Casters /8 BX Cable 26" Long BX Connector - Straight Cover - External Terminal Block (208/240V Units) Plate - Line Cord Patch ' Long Power Cord (5V Gas Unit) Terminal Block - 3 Pole-Hi Voltage 9200 Cover - Main Back, Std SS Cover - Main Back, Deep SS Cover W/A - Standard Depth (Prison Package) Cover W/A - Deep Depth Gas (Prison Package) Cooling Fan Guard - 20mm Panel - Open Base, SS Rack Guide - Lower, Open Base Support - Rack Guide, Upper Clip - Lower Rack Guide Support Probe Connector Cover Plate - Element Patch * NOT ILLUSTRATED RECOMMENDED STOCK PARTS U_GO_PL_CONVECTION_SGM (Rev 6) Page 23

24 U.S. RANGE PARTS IDENTIFICATION Summit Gas Convection Ovens LIST OF WIRING DIAGRAMS & AVAILABLE KITS PART # DESCRIPTION WIRING DIAGRAMS (For Reference Only - Contact Technical Service Department for assistance) SGM 5V 60Hz Gas Digital Control SGM 208/240V Gas Digital Control Conversion - Fastron Digital Control Converted to Manual Control PART # DESCRIPTION GAS CONVERSION KITS (Contact Parts Department for assistance) Gas Conversion Kit for 60,000 BTU/HR Natural Gas Final Configuration (Ref: 342) Gas Conversion Kit for 80,000 BTU/HR Natural Gas Final Configuration (Ref: 343) Gas Conversion Kit for 60,000 BTU/HR Propane Gas Final Configuration (Ref: 344) PART # SINGLE & DOUBLE DECK KITS (OPEN BASE, LEGS & CASTERS) (For Reference Only - Contact Sales Department for assistance) DESCRIPTION 9523 Single Deck S/S Open Base & Feet Kit 9524 Single Deck S/S Open Base & Casters Single Deck S/S Legs & Feet Inserts Single Deck S/S Legs and Casters Double Deck - Kit MCO - Heavy Duty Casters 9520 Double Deck - Kit MCO - LO-Profile Casters Double Deck Gas W/Inserts S/S Legs Double Deck Gas W/Casters Double Deck Gas W/Lo Profile Casters PART # DESCRIPTION 9527 Direct Connect Venting Kit VENTILATION KITS (For Reference Only - Contact Sales Department for assistance) Page 24 U_GO_PL_CONVECTION_SGM (Rev 6)

25 U.S. RANGE PARTS IDENTIFICATION BULLETINS (for all full size convection ovens) BULLETIN # SUBJECT DATE B S New Axial Cooling Fan Install Instructions SEP 7/09 GAR-03-2-AIC Master 200 Series Controller P/N FEB 8/2 BI P Parts Department Notification: Controllers - Important Information. See new bulletin GAR-02-4-AC FEB 22/2 GAR--2-AC Convection Ovens, New Elreha Controller Critical & Recommended Stock Parts SEP 2/2 GAR-06-3-AIC Error Messages and Description, Elreha Digital Controls SEP 6/3 GAR-08-3-AIC Convection Oven Keypad Test Points Chart (Elreha Digital Control) OCT 6/3 GAR-02-4-AC Convection Oven Digital Controller Conversion Kits Availability Chart JAN 28/4 GAR-04-4-AC Convection Oven Door Switch Replacement Kits FEB 4/4 REVISION HISTORY (SGM) REV# PAGE ITEM# NOTES DATE 6 2, 4A Added new overlay Overlays , are still available.. 7 2, 4A Added new overlay Overlays , 9085 are still available.. 25 Added bulletins 24 Removed Canopy Diverter Kit from Available kits as NLA New door switch kits; New bracket for door switch; new CAM assebmlby for door switch. PCC# Created new section: Fastron Controller Replacement Kit Option Chart. Modified previous 4 illustrations. No change to Fastron kits from 202. New Cooling Kits for Elreha, PCC FEB 27/4 U_GO_PL_CONVECTION_SGM (Rev 6) Page 25

26