Dimension Series One, Two, Three and Four Grade Dispensers
|
|
|
- Prosper Hart
- 5 years ago
- Views:
Transcription
1 Dimension Series One, Two, Three and Four Grade Dispensers Model Numbers D00 D01 D02 D03 D04 D05 D0E D0G Dimension One-Grade (One-Sided) Dimension One-Grade (Two-Sided) Dimension Two-Grade (One-Sided) Dimension Two-Grade (Two-Sided) Dimension Three-Grade (One-Sided) Dimension Three-Grade (Two-Sided) Dimension Four-Grade (One-Sided) Dimension Four-Grade (Two-Sided) Load Table See attached wiring diagrams: FE-317 Dimension Series Dispensers 120VAC FE-318 Dimension Series Dispensers 240VAC Operating Environment Relative Humidity Minimum Outside Ambient Temperature Maximum Outside Ambient Temperature 20% to 95% non-condensing -22 F (-30 C) 131 F (55 C) Performance Requirements Minimum Delivery Rate* Meter Accuracy psi inlet pressure (45 76kg/cm2 inlet pressure) ± 0.25% from 1.5 to 15 gpm (5.7 to 57 lpm) * Actual flow rates will depend on your specific installation and accessories used. Weights One-Grade Two-Grade Three-Grade Four-Grade 900 est. pounds/410 est. kilograms 1,100 est. pounds/500 est. kilograms 1,225 est. pounds/560 est. kilograms 1,650 est. pounds/750 est. kilograms MDE D Export Pump and Dispenser Installation Addendum for Dimension Dispensers 06/98 Page 1
2 Dimension Series One, Two, Three and Four Grade Dispensers Model Number Breakdown Model Number: X X X Product D - Dimension Family Member 0 - Dispenser 1 - Pump 8 - Single Dispenser 9 - Single Pump Configuration 0 - One-Grade (One-Sided) 1 - One-Grade (Two-Sided) 2 - Two-Grade (One-Sided) 3 - Two-Grade (Two-Sided) 4 - Three-Grade (One-Sided) 5 - Three-Grade (Two-Sided) 6 - Four-Grade (One-Sided) Back-to-Back 7 - Four-Grade (Two-Sided) Back-to-Back 8 - Three-Grade (One-Sided) Back-to-Back A - Three-Grade (Two-Sided) Back-to-Back E - Four-Grade (One-Sided) G - Four-Grade (Two-Sided) Options: Push-To-Start Nozzle Lever Activated Nozzle CRIND * Customer Programmable Preset * Cash/Credit Mechanical Totalizers Gallon Totalizers Metric Totalizers * Cannot have both CRIND and Customer Programmable Preset Serial Number/Model Number Plate Location Standard Diesel Fuel Gas Unleaded Plus Unleaded Super Unleaded Options VaporVac U.S. Gal Tots Vapor Ready Metric Tots Lever Activate Elect / Mech Tots Button Activate CRIND Cash/Credit Pump Preset Model No. DXX MFG. BY GILBARCO, INC. GREENSBORO, N.C. Serial U.S.A. No. DX PA For use with equipment specified in installation instructions. U L Underwriters Power Operated Dispensing Device Labortories Inc. For Flammable Liquids No. H LISTED Page 2 MDE D Export Pump and Dispenser Installation Addendum for Dimension Dispensers 06/98
3 Elevation - Standard Configuration Side View One-Grade Dispenser Two-Grade Dispenser 23-5/8" 600 mm 32-1/8" 816 mm 39-11/32" 999 mm 15-13/32" 391 cm 11-1/4" 286 cm 22" 559 mm 76" 1930 mm 22" (559 mm) 28-5/8" (727 mm) 28-5/8" 727 mm 33-1/32" 839 mm 39-3/8" 1000 mm 20-1/16" 510 mm 546 mm 1/16" 1.6mm 7-3/32" 180 mm 31-13/32" 798 mm 45-19/32" 1158 mm 38-1/2" 978 mm Three-Grade Dispenser Four-Grade Dispenser 46-7/16" 1180 mm 53-35/64" 1360 mm 40-5/8" 1032 mm 40-5/8" 1032 mm 64-11/16" 1643 mm 71-25/32" 1823 mm MDE D Export Pump and Dispenser Installation Addendum for Dimension Dispensers 06/98 Page 3
4 Footprint - Standard Configuration One-Grade (6) 3/4" X 1-1/2" slots for Anchor Bolts 1-1/2" Supply Union 6-27/32" 174mm 18-31/32" 482mm 21" 533mm 30" 762mm 36-27/32" 936mm Box A Side Hydraulic Two-Grade (8) 3/4" X 1-1/2" slots for Anchor Bolts 7-3/32" 180mm 13-15/16" 354mm 2 637mm 18-31/32" 482mm 21" 533mm 30" 762mm 43-15/16" 1116mm (2) 1-1/2" Supply Unions Box A Side Hydraulic Page 4 MDE D Export Pump and Dispenser Installation Addendum for Dimension Dispensers 06/98
5 Standard Configuration Three-Grade (8) 3/4" X 1-1/2" slots for Anchor Bolts 14-3/16" 360mm 21-1/32" 534mm 19-23/32" 501mm 30-31/32" 787mm 37-31/32" 964mm 33" 838mm 42" 10 (3) 1-1/2" Supply Unions 63-1/32" 1601mm Hydraulic Box A Side Four-Grade (8) 3/4" X 1-1/2" slots for Anchor Bolts 21-9/32" 541mm 28-1/8" 714mm 14-31/32" 380mm 24-27/32" 631mm 30-31/32" 787mm 34-23/32" 882mm 33" 838mm 42" /8" 1781mm (4) 1-1/2" Supply Unions Product 4 Hydraulic Box A Side Product 4 MDE D Export Pump and Dispenser Installation Addendum for Dimension Dispensers 06/98 Page 5
6 Page 6 MDE D Export Pump and Dispenser Installation Addendum for Dimension Dispensers 06/98
Load Table See attached wiring diagrams:
The Advantage MPD Single-Hose Dispenser For Bennett and Southwest Foundations Model Number B85 B84 Description The Advantage MPD Three-grade, single-hose (two-sided) The Advantage MPD Three-grade, single-hose
The Advantage and Optimum Dual and Quad Pumps and The Advantage Super-Hi Dual Pumps
The Advantage and Optimum Dual and Quad Pumps and The Advantage Super-Hi Dual Pumps Related Manuals MDE-2833 MDE-3116 MDE-2755 Pump and Dispenser Site Preparation Distribution Box Installation Manual STP
Highline Super-Hi High Gallonage Model No. Description. Load Table. Operating Environment. Performance Requirements
Specifications Highline Super-Hi High Gallonage Model No. Description AC4982A-MS1 Super-Hi Single One-Product Master Dispenser AC7942A-MS1 Super-Hi Master/Satellite Combo Dispenser Load Table See attached
Highline Standard Gallonage Dispenser. Load Table. Operating Environment. Performance Requirements
Specifications Highline Standard Gallonage Dispenser Model No. AC4921A AC5921A AC6921A Description Highline 111B Single One-Product Dispenser Highline 111B Dual One-Product Dispenser Highline 111B Dual
Available Models and Weights
The Advantage Selectable Blender Dispenser Available Models and Weights Models Description Weight Selectable Blender 36" B7E 3 + 0 (single-sided) B78 3 + 0 (two-sided) B7N 4 + 0 (single-sided) 725 lbs./326
Related Manuals Pump and Dispenser Start-Up/Installation Manual Flow Restrictor Installation Manual
MPD -1 and MPD-3 Available Models and Weights Generic Model No. Description Weight RAN1220A MPD-1 Three-Grade Dispenser (Two-Sided) High Profile 970 lbs./436 kgs. RAR1220A MPD-1 Three-Grade Dispenser (Two-Sided)
The Advantage Series. Pump & Dispenser Specifications MDE-3807A
The Advantage Series Pump & Dispenser Specifications MDE-3807A Computer Programs and Documentation All Gilbarco Inc. computer programs (including software on diskettes and within memory chips) and documentation
PT Optimum Series Illustrated Parts Manual
PT-1931 Optimum Series Illustrated Parts Manual Computer Programs All Gilbarco computer programs (including software on diskettes and within memory chips) are copyrighted by, and shall remain the property
Salesmaker Series Pumps And Dispensers Illustrated Parts Manual
PT-599B Salesmaker Series Pumps And Dispensers Illustrated Parts Manual For use with -H, -4A and Pro-Blender COMPUTER PROGRAMS All Gilbarco computer programs (including software on diskettes and within
Nozzles Lane-oriented and High-hose Attachment Downloadable Software. Endress & Hauser LPG Mass DN15 Diesel Exhaust Fluid (DEF)
Page 1 of 11 For: Retail Motor Fuel Dispenser (RMFD) Dispenser, Electronic Computing Models: NA, NPA, NPB, NPC and Field Upgrade Modules Gilbarco Part Number ENC-DEF-RF Generic Names: Encore 500, Encore
Control Valves/Meters Grease
Grease 740 WARNING Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726, 81795 Install as shown. Swivels Volume High-Pressure Swivels Model Description Thread Size 81728 Straight 1 /2" NPT(m) x
Dresser Wayne Ovation Grade Model B 12/3, R 13/3
Dresser Wayne Ovation 2-3+0 Grade Model B /3, R /3 VALANCE DECALS 48 MQPTC Ovation Valance TriCLEAN If the Ovation risers are not white, contact your CITGO MR01 Red Accent Decal 42 x 34 M537 Danger: Extremely
LD Series Electronic Meters
LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior
12 French Drive Mono, ON Canada L9W 5W1 Ph Toll Free Fax
CONTROL HANDLES AND ELECTRONIC METERS 12 French Drive Mono, ON Canada L9W 5W1 Ph. 519-942-8800 Toll Free 1-800-252-5636 Fax 519-942-4799 info@appliedlubrication.com oil Electronic meter RAASM s electronic
590G Series Golf Spray Head. 590G Series Golf Spray Head. Variable Arc 4, 6, 12 Pop-up X-Flow and Check-O-Matic Standard.
590G Series Golf Spray Head 590G Series Golf Spray Head Variable Arc 4, 6, 12 Pop-up X-Flow and Check-O-Matic Standard Specifications Radius: 2' 18' (,6 5,5m) Maximum operating pressure: 75 psi (5,2 Bar)
SERIES WC & WCS. Watchman Series & WCS Condensate Units. Replacement Parts for. Hoffman PARTS LIST DN0436. Hoffman Pump
Hoffman PARTS LIST DN06 REVISION B Watchman Series WC Cast Iron Receiver Single or Duplex Replacement Parts for Watchman Series WCS Steel Receiver Single or Duplex Watchman Series WC & WCS Condensate Units
Portable Fuel Dispensing Equipment
Portable Fuel Dispensing Equipment (Model 107 Fuel Conditioning Cart) (Model 106 Fuel Service Cart) Webber EMI offers a full line of fuel dispensing & handling equipment, from fuel conditioning drum carts,
Centro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
CC3060 TYPE 12 COMPACT CABINET COOLER AIR-TO-WATER FLUSH-MOUNT MODEL
CC3060 TYPE 12 CC3060 13 lbs 9,300 0.3 1 x 6 30 x 8-3/4 x 4 Efficiency: 68.8 Watts / C T based on average internal cabinet temperature. 2. CC3060 Rated cooling: 2,725 Watts mounted to an uninsulated 72
TYPE MP OSCILLATING PISTON FLOWMETER
TS-150 (G) TYPE MP OSCILLATING PISTON FLOWMETER Flow Rates of 3.8 to 1,140 Liters/Min. (1 to 300 gpm) Accuracy of ±0.5% of Rate ±0.1% Repeatability Magnetically Coupled Output Shaft Proven Reliable Oscillating
25 mm (1 in), 38 mm (1-1/2 in) & 50 mm (2 in) TYPE S FLOWMETERS WITH MODEL 157 AND 800 SERIES REGISTERS
TS- Rev. B Type S lowmeters 1, 1 1 2 & 2 mm (1 in), mm (1-1/2 in) & mm (2 in) TYPE S LOWMETERS WITH MODEL 7 AND 8 SERIES REGISTERS 1-1/2" Type S with Model 7 Register SPECIICATIONS 1" Type S with Model
GASBOY FLEET & COMMERCIAL
GASBOY FLEET & COMMERCIAL F U E L I N G ATLAS SERIES FUELING EQUIPMENT CONTENTS Gasboy Overview 1 9853 Electronic High Flow 2 9850 Electronic Ultra-Hi 4 9216 Satellite 6 9862 Electronic DEF 8 9872 Electronic
Standard Features and Options M07300A001*1, M07300A002*1, M07300A003*1, M07300A004*1, M07300A005*1, M07300A006*1
Page 1 of 28 For: Retail Motor Fuel Dispenser (RMFD) Electronic Computing Model: Nxx Series (See Page 3 for Model Designation) Generic Names: Encore 300, Encore 300S, Encore 500, Encore 500S, Encore 550,
Installation & Operation Manual. IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE.
Elecronic Preset Meter 2 Industrial Handheld Series Model EPM2-IND Standard Series IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE. IOM-139-02-EN (1-12) 53400-139 Rev.
3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
Model FR610C Pump Shown. Suction Pipe, 1/4 HP VAC/60 HZ Motor, and Model 807C1 Meter Installed.
Series 600 AC Powered Pumps Model FR610C Pump Shown of Included Models Model Number FR610C FR611C Heavy Duty AC Utility Pump with 3/4" X 12' Hose & Nozzle, Telescoping Suction Pipe and 1/4 HP - 115 VAC/60
MDE-2833D. Pumps and Dispensers. Site Preparation For Use With: All Gilbarco pumps and dispensers
MDE-2833D Pumps and Dispensers Site Preparation For Use With: All Gilbarco pumps and dispensers Computer Programs and Documentation All Gilbarco computer programs (including software on diskettes and within
SOLURA BLUE DEF DISPENSING SOLUTIONS. SOLURAbLUE
SOLURA BLUE DEF DISPENSING SOLUTIONS SOLURAbLUE LOOK TO THE WORLD WIDE LEADER FOR ALL YOUR LUBRICATION AND FLUID HANDLING NEEDS LUBRICATION EQUIPMENT FOR Cars Trucks Buses Planes Rails Industry Mining
UNIMIX EM. Operations Manual. Supplied by:
UNIMIX EM Operations Manual Supplied by: UNIMIX OPERATING MANUAL The UNIMIX was developed to meet the needs of all metalworking shops for accurate, automatic coolant metering and mixing: a need not met
Fuel Dispensing & Accessory Packages
Fuel Dispensing & Accessory Packages HT-1150 Highland Tank Highland Tank provides turnkey solutions to fuel dispensing. In addition to a quality tank from the industry leader, Highland Tank can provide
INDUSTRIAL DYNAMICS CO
TS-150 Rev. B MP Oscillating Piston Flowmeter: 12.7 mm (1/2" Type MP) 25.4 mm (1" Type MP) 50.8 mm (2" Type MP) 76.2 mm (3" Type MP) TYPE MP OSCILLATING PISTON FLOWMETER 2 " Type MP with 800 Series Register,
Powers Controls Powertop Two-Way Valves Normally Open
Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless
LEGENDARY PRODUCTS & CUSTOMER SERVICE PUMPS & METERS FULL LINE OF QUALITY PRODUCTS MADE IN THE USA. Look for the red label! DOING BUSINESS SINCE 1972
LEGENDARY PRODUCTS & CUSTOMER SERVICE PUMPS & METERS MADE IN THE USA FULL LINE OF QUALITY PRODUCTS Look for the red label! DOING BUSINESS SINCE 1972 Great Plains Industries is a leading manufacturer of
3:1 MOBILE LUBE PACKAGES (55 gal)
3:1 MOBILE LUBE PACKAGES (55 gal) Dolly-mounted oil dispenser kits with digital metered valve and 3:1 pumps. Available with or without hose reel. The ideal combinations for dispensing oil in any workplace.
W-300-AST Specifications
W-300-AST Specifications DISTANCE TO REMOVE INTERNAL SOLIDS 5 3/4" 27 1/4" 4.5" 10" TO WATER SUPPLY 0.5" MALE CONNECTOR 25 1/8" 11" CONTAINER, MODEL GC-2, 11.6 QUART CAPACITY 11" FRONT VIEW 9 3/8" 12"
MDE-2381A SERVICE MANUAL. PA0242 Distribution Box GILBARCO INC., 7300 W. FRIENDLY AVENUE, P.O. BOX 22087, GREENSBORO, N.C /90/.
MDE-2381A MANUAL PA0242 Distribution Box UR L GILBARCO INC., 7300 W. FRIENDLY AVENUE, P.O. BOX 22087, GREENSBORO, N.C. 27420 08/90/.5 INTRODUCTION CAUTION Some of the procedures in this manual may involve
Dry Vacuum System. Part Numbers: V15, 2V15, 3V15 and 4V15 USER S MANUAL. Recommend Daily use of Monarch CleanStream
Dry Vacuum System Part Numbers: V15, 2V15, 3V15 and 4V15 USER S MANUAL Recommend Daily use of Monarch CleanStream TABLE OF CONTENTS Description Page Congratulations...3 Purpose of this Manual....3 Safety
Lube PUMP PACKAGES. pumpmaster 3+3 and 6
stationary grease pump packages pumpmaster 3+3 and 6 Model 336000 PumpMaster 3 + 3 grease pump package for 120 lb kegs 332 PumpMaster 3 + 3 high pressure grease pump with bung adapter 1936 120 lb keg cover
Technical Support Guide for High Performance Coatings Carboline Company
Technical Support Guide for High Performance Coatings Carboline Company 350 Hanley Industrial Court St. Louis, MO 63144 800-848-4645 www.carboline.com INDEX Page How to Specify Blasting 1 Abrasive/Profile
BATTERY WASH CABINETS, WASH STATIONS, RECIRCULATION/NEUTRALIZATION SYSTEM
BATTERY WASH CABINETS, WASH STATIONS, RECIRCULATION/NEUTRALIZATION SYSTEM Complete Product Line A cost-effective solution for extending the life of batteries and reducing lift truck electrical problems
2062 ½ NPTM x ¼ NPTF bushing ½ NPTM x 3/8 NPTF bushing ½ NPTM x 3/8 NPTF bushing
stationary grease pump packages pumpmaster 3, 3+3 and 6 3 Model 306000 PumpMaster 3 grease pump package for 120 lb kegs 302 PumpMaster 3 high pressure grease pump with bung adapter 1936 120 lb keg cover
KINGSTON. KNG Series Product Catalog. Ph: Toll:
KEst.1908 KINGSTON KNG Product Catalog Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050 Ph: 310.326.8287 Toll: 800.210.2525 Email: sales@kingstonvalves.com Kingston Safety
Smith Meter PD Meters 3" Steel Model E3
Smith Meter PD Meters 3" Steel Model E3 Specifications Bulletin SS01016 Issue/Rev 1.0 (8/13) The Smith Meter Model E3 is a 3", double-case, straight-through (S1 through S7) or angle-type (A1 and A3), rotary
M-1115S Series Fuel Pump
SAVE THESE INSTRUCTIONS M-1115S Series Fuel Pump Owner s Manual TABLE OF CONTENTS General Information...2 Safety Instructions...2 Installation...3 Operation...4 Maintenance...5 Repair...5 Troubleshooting...9
Operators Manual. Recirculating Chiller /06/08
Operators Manual Recirculating Chiller 110-197 11/06/08 Table of Contents Section 1. General Information 1.1 Warranty 1.2 Unpacking 1.3 Package Contents 1.4 Description of the Recirculating Chiller 1.5
3" Steel Model E3. We put you first. And keep you ahead.
SPECIFICATIONS MEASUREMENT SOLUTIONS 3" Model E3 Bulletin SS01016 Issue/Rev. 1.1 (2/15) We put you first. And keep you ahead. SMITH METER PD METERS The Smith Meter Model E3 is a 3", double-case, straightthrough
2011 Alternative Fueling Infrastructure Catalog
2011 Alternative Fueling Infrastructure Catalog Atlanta GA (800) 241-4155 Kansas City MO (800) 821-5062 Dallas TX (800) 821-1829 SINCE 1937 Fayetteville NC (800) 447-1625 Houston TX (800) 334-7816 Little
High Pressure Adjustable Nozzle Spraying Device JETON R/D & MFG. INC.
JETON R/D & MFG. INC. No. 17, Lane 100, Tsao-Tyi Road, Ta-Li Dist., Taichung, Taiwan R.O.C. 10017 TEL: 886-4 - 24953456 FAX: 886-4 - 24953399 E-MAIL: jetoninc@seed.net.tw TEL: 021-65622765. 021-65623571
LD Packages. Discover the value of Graco LD TM Series Pumps PROVEN QUALITY. LEADING TECHNOLOGY.
LD Packages Discover the value of Graco LD TM Series Pumps PROVEN QUALITY. LEADING TECHNOLOGY. Index LD Series LD Air-Powered Pumps...p. 4-6 LD Meters...p. 7 LD Enclosed Hose Reels...p. 8 Oil Packages
Belanger Tunnel Equipment Quick Reference Guide REV 02
Belanger Tunnel Equipment Quick Reference Guide REV 02 Belanger, Inc. * P.O. Box 5470 * Northville, MI 48167 Customer Service Phone (248) 347-4700 Fax (248) 380-9681 www.vectorwash.com or www.belangerinc.com
STATIONARY GREASE PUMP PACKAGES. Model PM grease pump package for 120 lb kegs lb drum cover 966 Follower plate for 400 lb drum
STATIONARY GREASE PM 3+3 AND 6 Model 336 000 PM 3 + 3 grease pump package for 120 lb kegs 332 PM 3 + 3 high pressure grease pump with bung adapter 1936 120 lb keg cover 964 Follower plate for 120 lb keg
DT35 and DT55 Series Rotary Sprinklers Installation & Service Instructions
O N DT35 and DT55 Series Rotary Sprinklers Installation & Service Instructions Introduction The DT35 and DT55 series adjustable part circle and full circle rotary sprinklers are designed specifically for
Kingston Safety Relief Valves
Kingston Safety Relief Valves ASME Section VIII - NB Certified for Liquid, Air/Gas and Steam The safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage.
DC 12V 8GPM Fuel Transfer Pump Kit User s Manual
DC V GPM Fuel Transfer Pump Kit User s Manual Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY BRENTWOOD, TN 0 For customer support, call: ---90 www.tractorsupply.com MADE IN CHINA MODEL NUMBER: 0
Purpose Of This Document This manual provides the information to assemble and install Lighted Canopy Conduit Kits on The Advantage Series.
MDE-2677B Kits K35497 and K93757 Lighted Canopy Conduit For The Advantage Series June 2003 Purpose Of This Document This manual provides the information to assemble and install Lighted Canopy Conduit Kits
Pure sine wave charger inverter Product Manual
Pure sine wave charger inverter Product Manual The inverter installer must be professional, for the high pressure in the inverter, unprofessional person please do not open it. The inverter should be installed
USE OF ENERPAC HYDRAULIC EQUIPMENT PRESENTED BY: HARDISH TRIVEDI
USE OF ENERPAC HYDRAULIC EQUIPMENT 1 PASCAL S LAW Pressure applied at any point upon a confined liquid, is transmitted equally in all the directions & acts perpendicular to the surfaces with equal force.
A Compact, Liquid-Cooled Variable Speed Drive for High Horsepower Applications
A Compact, Liquid-Cooled Variable Speed Drive for High Horsepower Applications The Reliance Electric LiquiFlo AC drive combines high-performance variable speed drive technology with a patented liquid-cooling
fusion RF Control Handle
SERVICE BULLETIN SB3088 Rev B 04/15 fusion 2.4 - RF Control Handle Model 3331-021...2.4 GHz RF Control Handle Thoroughly read and understand this manual before installing, operating or servicing this equipment.
Model 1210C Battery Powered Pump Shown
Page 1 of 6 PRODUCT DATA SHEET 12 Volt DC Rotary Vane Pump Series 1200C Description of Included Models Available Options Safety Listings Accessories Performance Flow Curve Fluid Compatibility Dimensions
2 PETROLEUM AND LP-GAS TANK TRUCK METERS
TS-250 Rev. E Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 4D-MT with Vapor Release,
Automatic Lubrication Solutions Saving You Time and Increasing Productivity
Graco has systems for: Agricultural Equipment Bottling Operations Beverage Production Cement Plants Construction Equipment Food Processing Forestry & Lumber Gas Compression Injection Molding Machine Tools
CXVT Engineering Data
CXVT Engineering Data H Access Door Both Ends W End Elevation: CXVT Units CXVT-x-1224-x and CXVT-x-1426-x CXVT-x-2424-x and CXVT-x-2826-x 1. Model number denotes R-717 capacity in evaporator tons at a
DT35 and DT55 Series Rotary Sprinklers Installation & Service Instructions
O N DT35 and DT55 Series Rotary Sprinklers Installation & Service Instructions Note: For preliminary use only. Introduction The DT35 and DT55 series full-circle/adjustable part-circle rotary sprinklers
INSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
Industrial Electric Monitors. Industrial
Industrial Electric Monitors Corrosion resistant monitors with maximum travel for optimal coverage in industrial, mining and marine environments. Severe-Duty Monitor 750 GPM (2900 LPM) The Severe-Duty,
1 MECHANICAL FUEL METER
1 MECHANICAL FUEL METER USER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
Compressor Recording Data Book
Compressor Recording Data Book ARIEL RESPONSE CENTER SPARE PARTS ORDER ENTRY US/Canada...888.397.7766 International..+1 740.397.3602 @ Ariel Response Center...arc@arielcorp.com @ Spare Parts...spareparts@arielcorp.com
A-dec 200 P RE-INSTALLATION GUIDE
A-dec 200 P RE-INSTALLATION GUIDE This document contains technical specifications for installing the A-dec 200 equipment line. Contents Structural Requirements...................................................
TABLE OF CONTENTS GENERAL INFORMATION
To the owner Congratulations on receiving your GPI Industrial Grade Turbine. We are pleased to provide you with a product designed to give you maximum reliability and efficiency. Our business is the design,
PORTABLE UNITS PORTABLE GREASE PACKAGES FOURTH DIGIT. Hose Length. Model Model 1307
PORTABLE GREASE PACKAGES NUMBERING SYSTEM FIRST THREE DIGITS FOURTH DIGIT FIFTH DIGIT SIXTH DIGIT Pump Model Hose Length Dolly Filter Regulator Combo with Gauge 301 402 303 305 35 lb pail unit, 55:1 PM3
Pressure Independent Control Series
Pressure Independent Control Series Two-Way, Brass Valve Bodies, -Inch to 2-Inch, ANSI 250 to 1-1/4 Inch NC - to 1-1/4-Inch NO 1- to2-inch NO Description Features Application Product Numbers and Ordering
2 PETROLEUM AND LP-GAS TANK TRUCK METERS
TS-250 Rev. D Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4D-MT with Vapor Release,
Control Valves/Meters Grease
Grease 740 WARNING Lincoln Control Valves, Meters and Accessories Provide the Durability and Precision You Need for Your Lubrication Systems. Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726,
Model and Series 115 VAC INDUSTRIAL DIAPHRAGM PUMPS. PumpAgents.com - buy pumps and parts online INDUSTRIAL DIAPHRAGM PUMPS
Model 31801 and 31800 Series 115 VAC INDUSTRIAL DIAPHRAGM PUMPS INDUSTRIAL DIAPHRAGM PUMPS FEATURES Run Dry Ability Self-Priming Thermal Overload Protected Motor Easy Installation Low Amp Draw Compact
PFM6 Digital Portable Hydraulic Tester
PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal
M3500 Industrial Pressure Transmitter
M3500 Industrial Pressure Transmitter The M3500 is a high accuracy industrial pressure transmitter featuring HART communications and a cast aluminum enclosure for indoor or outdoor use. Typical output
TURBINE HOUSING. Owner s Manual Includes Aluminum, Brass and Stainless Steel Housings and ANSI Flange Fittings
Manual Number 920708-3 Rev. C Industrial Grade TURBINE HOUSING Owner s Manual Includes Aluminum, Brass and Stainless Steel Housings and ANSI Flange Fittings 5252 East 36th Street North Wichita, KS USA
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
Features Globe Valve 2-Way & 3-Way Assembly Features:
Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot
Nozzles Lane-oriented and High-hose Attachment Back-lighted Liquid Crystal Displays (LCD)
Page 1 of 29 For: Retail Motor Fuel Dispenser (RMFD) Electronic Computing Model: Nxx Series (See Page 3 for Model Designation) Generic Names: Encore 300, Encore 300S, Encore 500, Encore 500S, Encore 550,
Pro 30 Plus Gas Caddy
Pro 30 Plus Gas Caddy Model Operator s Manual Contents Page Safety & Warning Instructions 2 General Product Description 3 Assembly 3 Operation 3-4 Storage 4 Product Specifications 4 Replacement Parts &
DT34 and DT54 Series Rotary Sprinklers
DT34 and DT54 Series Rotary Sprinklers Installation & Service Instructions Introduction The DT34 and DT54 series full-circle rotary sprinklers are designed specifically for golf course applications. Manufactured
PUMPS Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading
olted Plastic olted Metallic lamped Metallic E3 TREE IN PUMPS ulk hemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker ar Unloading When you need to pump
Enhanced Vapor Recovery and In-Station Diagnostics. Presented by: Matthew Schuessler, N Cal Territory Mgr 1
Enhanced Vapor Recovery and In-Station Diagnostics Presented by: Matthew Schuessler, N Cal Territory Mgr 1 The Healy EVR Phase II Vac-Assist solution Based on the August 1999 CARB ORVR certified Healy
D/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
Variable Axial Piston Eaton Vickers PVH Pump
Variable Axial Piston Eaton Vickers PVH Pump PVH High pressure axial piston pumps with low noise PVH high flow, high performance pumps are a family of variable displacement, inline piston units that incorporate
W-200-IS Specifications
MOTOR/TIMER ENCLOSURE Big Dipper Point Source Automatic W-200-IS Specifications 1 CLEARANCE REQUIRED FOR STRAINER BASKET & LID REMOVAL 14.75 2 PIPE / 17.5 END VIEW 19.5 GC-6 10.5 GREASE 10.5 6 QUART CAPACITY
2 0 1 7 D E F E Q U I P M E N T C ATA L O G 608-487-9770 www.hartlandlubes.com TD1 Features & Benefits: Great performance and quiet operation Self priming Stainless steel motor shaft Polypropylene housing
RAM PUMP. With Alemite s wide range of pumps, you re sure to find one to meet almost any fluid transfer or dispensing application.
RAM PUMP The Alemite RAM pump is rugged enough to withstand even the most extreme conditions and handle your most challenging oil and grease applications with ease. The RAM pump sets the standard for pump
COMMERCIAL CONTROL VALVES. Magnum Control Valve
COMMERCIAL CONTROL VALVES Magnum Control Valve COMMERCIAL CONTROL VALVES Magnum Control Valve Controller Options The Pentair Water Magnum Control Valve is one of the most versatile valves on the market.
NEW AUTOJET PRECISION SPRAY CONTROL SYSTEM WITH ZONING
NEW AUTOJET 2008+ PRECISION SPRAY CONTROL SYSTEM WITH ZONING INCREASING THROUGHPUT AND DECREASING WASTE IN COATING, LUBRICATING AND DISPENSING OPERATIONS JUST GOT EASIER THAN EVER 98250 Modular Spray Manifold
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
Powers TM Controls SW 141 Differential Static Airflow Switches
Powers TM Controls SW 141 Differential Static Airflow Switches Document No. 155-052P25 SW 1 0518 Description The SW 141 Airflow Switch senses static differential pressure and the diaphragm operated snap
GREASE CONTROL GUNS GREASE CONTROL GUNS Grease control gun Grease control gun with rigid stem and 3 jaw connector ( ).
MEASURE AND CONTROL GREASE CONTROL GUNS AND ACCESSORIES GREASE METERS OIL CONTROL GUNS AND ACCESSORIES OIL METERS OIL METER ACCESSORIES FLUID CONTROL GUNS FLUID METERS HIGH FLOW IN LINE METERS ADVANCED
6-7/16" (164 mm) 6" (152 mm) Torque in. lbs. 4-7/8" (124 mm)
Gemini / Diaphragm Pumps Max. Flow Pump #88830 (SS), #8883 (Polypro), #88833 (Polypro), #88836 (Acetal), #88837 (Alum), #8883 (Acetal), #88834 (SS), #88835 (Polypro), #88838 (Alum) /" NPT (F) Fluid Outlet
Pressure Independent Control Series
Pressure Independent Control Series Two-Way, Brass Valve Bodies, 1/2-Inch to 2-Inch, ANSI 250 1/2 to 1-1/4 Inch NC 1/2- to 1-1/4-Inch NO 1-1/2 to2-inch NO Description Features Application Product Numbers
DTK. OEM Pelton Wheel Flow Sensor
OEM Pelton Wheel Flow Sensor measuring monitoring analyzing DTK Measuring Range: 0.8...9.5 to 6...90 GPH Water Measures Clear or Opaque Liquids Stainless Steel Body Pelton Wheel Design Requires No Inlet
Warm Melt Supply Systems. For warm melt materials and temperature conditioning applications
Warm Melt Supply Systems For warm melt materials and temperature conditioning applications Advanced Technology with a Modular Approach Precision temperature control Designed specifically for warm melt
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS Unit of Length Milli (mm) to Inches MM Decimal of inch Approx. Inch MM Decimal of inch Approx. inch 1 0.0394 3/64 14 0.5512 9/16 2 0.0787 5/64 15 0.5906