The Advantage and Optimum Dual and Quad Pumps and The Advantage Super-Hi Dual Pumps

Transcription

1 The Advantage and Optimum Dual and Quad Pumps and The Advantage Super-Hi Dual Pumps Related Manuals MDE-2833 MDE-3116 MDE-2755 Pump and Dispenser Site Preparation Distribution Box Installation Manual STP Installation Manual Available Models and Weights Model Number Description Weight B30 B31 BE0 The Advantage Dual The Advantage Super-Hi Dual 1-grade, 1-hose (single-sided) 1-grade, 1-hose (two-sided) 1-grade, 1-hose (single-sided) BE1 1-grade, 1-hose (two-sided) B52 The Advantage 2-grade, 2-hose (single-sided) B53 Quad 2-grade, 2-hose (two-sided) BI0 Optimum Dual 1-grade, 1-hose (single-sided) BI1 1-grade, 1-hose (two-sided) BK2 Optimum Quad 2-grade, 2-hose (single-sided) BK3 BM2 BM3 Optimum Quad Single Hose 2-grade, 2-hose (two-sided) 2-grade, 2-hose (single-sided) 2-grade, 2-hose (two-sided) 875 lbs./ 394 kgs. 925 lbs./416 kgs. 875 lbs./ 394 kgs. 925 lbs./416 kgs. Load Table Field Wiring Diagram (Attached) FE-286 FE-284 Voltage Rating 110/115/120 VAC, Single Phase 230/380 VAC, 3-Phase, 50 Hz. Operating Environment Environment Range Relative humidity 20% to 95% Non-condensing Minimum outside ambient temperature -22 F (-30 C) Maximum outside ambient temperature 131 F (55 C) MDE L Pump and Dispenser Installation Addenda 06/98 Page i

2 R The Advantage and Optimum Dual and Quad Pumps and The Advantage Super-Hi Dual Pumps Model Number Breakdown Product B- The Advantage Series Family Member 3 - Dual Pump 5 - Quad Pump E- Super-Hi Dual Pump I - Optimum Dual Pump K - Optimum Quad Pump M - Optimum Quad Single-Hose Pump Configuration 0-1-grade, 1-side 1-1-grade, 2-side 2-2-grade, 1-side 3-2-grade, 2-side B X X Options Brand Panel, Backlit 3 Brand Panel, Lighted 3 Brand Panel, Unlit Button, Call 3 Button, Stop 3 Cash Acceptor 1, 3 CRIND Card Reader 1, 3 Hose Retriever Light Conduit (Canopy) Nozzle, Push-To-Start Nozzle, Lever Activated Preset, Customer Programmable 1, 3 Pricing, Cash/Credit 3 Speaker Totalizers, Mechanical Gallon Totalizers, Mechanical Imperial Totalizers, Mechanical Metric Vapor, Full (Balance System) 2 VaporVac Vacuum Assist 2 1 Cannot have both CRIND Card Reader and/or cash acceptor and Customer Programmable Preset. 2 Not available on Super-Hi models. 3 Not available on Optimum models. DIESEL 91 PLUS SUPER 93 Model number plate Dual Options Full Vapor Cash Acceptor BalanceVapor Retriever Balance Ready U.S. Gal Tots Lever Activate Metric Tots Button Activate Imp Gal Tots CRIND Overhead Spkr Cash/Credit Cnpy Lgt Cndt Pump Preset MFG. BY GILBARCO, INC. GREENSBORO, N.C. Serial U.S.A. No. PA For use with equipment specified in installation instructions. N.Y.F.D. C. of A. #4805 U L Model No. B05 DX Underwriters Power Operated Dispensing Device Labortories Inc. For Flammable Liquids No. H LISTED Quad Page ii MDE L Pump and Dispenser Installation Addenda 06/98

3 PRESS The Advantage and Optimum Dual and Quad Pumps and The Advantage Super-Hi Dual Pumps Elevation Diagram Models B30, B31, BE0, BE1, B52, and B53 (The Advantage Dual, Quad and Super-Hi Dual Pumps) 41-13/16" 37-1/4" 31-5/16" 21" 5-1/8" 9-1/2" Detail A 95-3/16" 94" 62-1/2" 16" 22" 23-1/4" (Long 24-1/2" (Medium 26-1/2" (Short 36" The Advantage Dual and Super-Hi flow units are less left Put-down and PPU module 21-1/2" 32-3/8" Short Nozzle Cradles 36-1/8" Long Nozzle Cradles Note: Gilbarco VaporVac and some Balance Vapor Recovery units use short nozzle cradles. Single-Line CRIND InfoScreen and Monochrome CRIND Detail A 55-1/2" 55-1/2" Base Base Screening Specifications Lower Doors Overall: 22.94" H x 37.74" W Front Surface: 19.94" H x 30.24" W Front Surface: 9.5" H x 41.81" W Side Surface: 9.5" H x 31.31" W Note: Measurements are in inches unless otherwise specified. MDE L Pump and Dispenser Installation Addenda 06/98 Page iii

4 Elevation Diagram Models BI0, BI1, BK2, BK3, BM2 and BM3 (Optimum Dual and Quad Pumps) 41-13/16" 37-1/4" 31-5/16" 21" 5-1/8" 9-1/2" 23-1/4" 95-3/16" 94" 25-1/2" 62-1/2" 46-3/16" 16" 25-15/16" (Long 27-3/16" (Medium 29-3/16" (Short 36" The Optimum Dual units are less left PPU & button. 21-1/2" 32-11/16" Short Nozzle Cradles 36-7/16" Long Nozzle Cradles Note: Gilbarco VaporVac and some Balance Vapor Recovery units use short nozzle cradles. Screening Specifications Lower Doors Overall: 22.94" H x 37.74" W Front Surface: 19.94" H x 30.24" W Front Surface: 9.5" H x 41.81" W Side Surface: 9.5" H x 31.31" W Note: Measurements are in inches unless otherwise specified. Page iv MDE L Pump and Dispenser Installation Addenda 06/98

5 Foundation Diagram B30, B31, BE0, BE1, B52, B53, BI0, BI1, BK2, BK3, BM2 and BM3 (Dual, Quad and Super-Hi Dual Pumps) TOP VIEW Speaker conduit opening 1/2" 1" Vapor recovery adapter hole location 36" 18" 29-3/4" 14-7/8" 21" 10-1/2" Slot dimensions for front & back anchor bolts. (4) 13/16" x 1-7/16" 10-3/4" 9-1/4" 7-7/8" 7-1/4" 6" 15-3/4" 21-1/2" 18-1/2" 1-3/16" 1-3/16" 5-5/8" 8-29/32" 12-23/32" 2-11/16" 8-29/32" 12-13/16" Supply union (1 or 2) 1-1/2" Main conduit 1" opening FRONT VIEW Vapor Recovery Adaptor Speaker Unilet Box Main Junction Box with main conduit FRONT J-BOX SIDE VIEW OF COLUMN 1-1/16" 1-1/16" Main Conduit Speaker Conduit 1" Capped Elbow (supplied) Speaker Unilet Box 11" FRONT RIGHT VIEW REAR REAR LEFT VIEW FRONT TOP VIEW OF MODEL CONFIGURATIONS DUAL PUMP G1 SIDE B SUPER-HI DUAL PUMP G2 SIDE B QUAD PUMP G1 SIDE B G2 SIDE A G1 SIDE A G1 G1 SIDE A G2 PRODUCT INLET LOCATIONS DUAL PUMP SUPER-HI DUAL PUMP QUAD PUMP A B NOT USED FUNCTION A B FUNCTION A B INLET FROM TANK B FUNCTION B30 1-GRADE, 1-HOSE, 1-SIDE (Uses position ) B21 1-GRADE, 1-HOSE, 2-SIDE BE0 1-GRADE, 1-HOSE, 1-SIDE (Uses position ) BE1 1-GRADE, 1-HOSE, 2-SIDE B52 2-GRADE, 2-HOSE, 1-SIDE (Uses position 'A and B') B53 2-GRADE, 2-HOSE, 2-SIDE NOTE: NUMBER OF HOSES LISTED ARE PER GRADE, PER SIDE. Note: Measurements are in inches unless otherwise specified. MDE L Pump and Dispenser Installation Addenda 06/98 Page v

6 Optional Conduit Locations (See Standard Conduit Location drawing for all standard conduit locations.) TOP VIEW Aux.junction box 2-11/16" 7-1/4" Aux. junction box conduit 1/2" opening FRONT VIEW Aux. junction box FRONT J-BOX SIDE VIEW OF COLUMN Call Button Conduit Aux. junction box REAR 7-1/4" FRONT LEFT VIEW Note: Call Button option not available on Optimum models. Page vi MDE L Pump and Dispenser Installation Addenda 06/98