A monolithic drainage system designed to accept and convey large volumes of rainwater. Product Attributes

Transcription

1 Scan for more information RECYFIX Monotec Technical Guide SP3.5 A monolithic drainage system designed to accept and convey large volumes of rainwater SURFACE PRODUCTS sp3.5 hauraton recyfix monotec Applications High traffic areas Parking areas School playgrounds Residential areas Service stations Public spaces Product Attributes Lightweight for easy, fast and low-cost installation PE/PP material is 100% UV stable and has a high resistance against aggressive chemical liquids and freezing Approvals/Standards Channel, grate and load classifications certified to European standard EN 1433 Quality ISO 9001:2008 Quality Management Standard The go to organisation for civil and rural water product solutions

2 Recyfix Monotec by Hauraton is a monolithic drainage system for heavily frequented traffic areas Requirements Monolithic drainage channels in traffic areas must: Be permanently corrosion-resistant Be secure against vandalism Be maintenance-free and drain reliably Satisfy aesthetic demands Solution Therefore, RECYFIX MONOTEC channels are especially suitable for draining such surfaces: Lightweight and easy processing for cost-effective installation Channel made of specially resistant modified polypropylene Leak-proof and chemical-resistant Sturdy and unbreakable Very quick to install sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 2 Load Classes RECYFIX MONOTEC channels meet the requirements of DIN EN 1433 and are suitable for the following load classes: C 250kN Load Class 250 kn D 400kN Load Class 400kN

3 Low weight ensures easy handling on site High resistance High resistance to frost, de-icing salt and UV light Withstands high temperature differences Chemical-resistant Significantly lighter than channels made of concrete or polymer/concrete Easy to transport and install [m] High hydraulic capacity sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 3 Strong & durable Impact resistant to D400kN loadings Elastic and especially resistant material (PP) One piece channel Manufactured with two parts, which are put together to make a monolithic channel in a mirror welding process. Highly stable design Optimised inlet surface with composite corrosion free grating design High capacity through slim channel construction Anti-thief design

4 Optimal hydraulic capacity through slim design. The RECYFIX MONOTEC channel is made of highly resistant and unbreakable polypropylene. Therefore, a particularly slender design is possible which has a positive effect with regard to drainage capacity. The smallest model, with a nominal width of 100 and a height of 230, already achieves a drainage cross-section of cm2. Monolithic channels, made from other materials, must have much thicker sidewalls which significantly reduces the drainage cross-section. sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 4 The RECYFIX MONOTEC Channel range consists of 3 heights with a nominal width of 100 and one model with a nominal width of 200. Long-term practical tests and computer-aided simulations lead to the same result: The RECYFIX MONOTEC accumulates heavy rainfall, provides a sufficient backwater reserve and drains large surfaces safely and reliably. Table 1 Nominal Size Drainage cross-section cm² Volume/ Channel Litres

5 1 RECYFIX MONOTEC channels made of modified polypropylene, according to DIN EN 1433, CE-conform. 2 Trash box made of galvanised steel with pipe connection possibility DN 200. Removable grating made of modified polypropylene for access to channel system. 3 Connection plate for flexible connection of different channel types with the trash box and closing cap for the closing of trash box. 4 End caps for channel start/channel end (DN 100) sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG

6 RECYFIX MONOTEC 100, class D 400 Type 230 Type 280 sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 6 Type 380 Table 2 Intake cross-sect. cm²/m Drainage cross-sect. cm² Item no. Type Type Type

7 RECYFIX MONOTEC 100, class D 400 Accessories Trash Box Fig. 1 Trash box with galvanised bucket Fig. 2 Technical drawing, trash box with galvanised bucket Fig. 3 Connection plate with screw set, galvanised, channel type 230 Fig. 4 Closing cap with screw set, galvanised Table 3 Trash box with galvanised bucket Looking handle with screw for protecion against vandalism Connection plate with screw set, galvanised, channel type Connection plate with screw set, galvanised, channel type Connection plate with screw set, galvanised, channel type Closing cap with screw set, galvanised, for trash box/inspection box Notes: All trash and inspection boxes are factory-made with the end face open to enable a modular use for all application situations: Option 1: one-sided channel connection: You will need 1 connection plate with the same channel height (= same type) and an closing cap. Option 2: two-sided channel connection: You will need 2 connection plates with the same channel height (= same type). Inspection Box sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 7 Fig. 5 Inspection box Fig. 6 Technical drawing, inspection box Fig. 7 Connection plate with screw set, galvanised, channel type 280 Fig. 8 Closing cap with screw set, galvanised Table 4 Inspectiotn box Looking handle with screw for protecion against vandalism Connection plate with screw set, galvanised, channel type Connection plate with screw set, galvanised, channel type Connection plate with screw set, galvanised, channel type Closing cap with screw set, galvanised, for trash box/inspection box Notes: All trash and inspection boxes are factory-made with the end face open to enable a modular use for all application situations: Option 1: one-sided channel connection: You will need 1 connection plate with the same channel height (= same type) and an closing cap. Option 2: two-sided channel connection: You will need 2 connection plates with the same channel height (= same type).

8 End Caps Fig. 9 End cap closed, galvanised, type 230 Fig. 10 End cap with horizontal UPVC-outlet DN 100, galvanised, type 280 Table 6 sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 8 End cap closed, galvanised, type End cap closed, galvanised, type End cap closed, galvanised, type End cap with horizontal UPVC-outlet DN 100, galvanised, type End cap with horizontal UPVC-outlet DN 100, galvanised, type End cap with horizontal UPVC-outlet DN 100, galvanised, type Further accessories Fig. 11 Step Fall Adapter for step slope, from type 230 to 280 Fig. 12 Step Fall Adapter for step slope, from type 280 to 380 Table 5 Step Fall Adapter for step slope, from type 230 to Step Fall Adapter for step slope, from type 280 to

9 RECYFIX MONOTEC 200, class D 400 Type 450 Table 8 Intake cross-sect. cm²/m Drainage cross-sect. cm² Item no. Type RECYFIX MONOTEC 200 Accessories Trash Box sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 9 Fig. 13 Trash box with galvanised bucket Fig. 14 Technical drawing, trash box with galvanised bucket Fig. 15 Connection plate with screw set, galvanised, channel type 450 Fig. 16 Closing cap with screw set, galvanised, for trash box/inspection box Table 7 Trash box with galvanised bucket Looking handle with screw for protecion against vandalism Connection plate with screw set, galvanised, channel type Closing cap with screw set, galvanised, for trash box/inspection box Notes: All trash and inspection boxes are factory-made with the end face open to enable a modular use for all application situations: Option 1: one-sided channel connection: You will need 1 connection plate with the same channel height (= same type) and an closing cap. Option 2: two-sided channel connection: You will need 2 connection plates with the same channel height (= same type).

10 Inspection Box Fig. 17 Inspection box Fig. 18 Technical drawing, inspection box Fig. 19 Connection plate with screw set, galvanised, channel type 450 Fig. 20 Closing cap with screw set, galvanised for trash box/inspection box Table 9 sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 10 Inspection box Looking handle with screw for protecion against vandalism Connection plate with screw set, galvanised, channel type Closing cap with screw set, galvanised, for trash box/inspection box Notes: All trash and inspection boxes are factory-made with the end face open to enable a modular use for all application situations: Option 1: one-sided channel connection: You will need 1 connection plate with the same channel height (= same type) and an closing cap. Option 2: two-sided channel connection: You will need 2 connection plates with the same channel height (= same type). End Caps Fig. 21 End cap closed, galvanised, type 450 Fig. 22 End cap with horizontal UPVC-outlet DN 150, galvanised, type 450 Table 10 End cap closed, galvanised, type End cap with horizontal UPVC-outlet DN 150, galvanised, type

11 Installation example concrete, class C250 D Installation example concrete class C D 400 A 3-5 durable overhang Expansion joint b Concrete wearing layer d h B Base course Frost resistant sub-base C * h = Channel height plus camber Category according to EN 1433 / DIN Foundation: with b / thickness d / height h (in cm) The named concrete quality is a minimum quality A 15 B 125 C 250 D 400** E 600 F / 15 / * 15 / 15 / * Applying to following systems: RECYFIX MONOTEC 100, 200 EN / DIN quality of concrete stretcher with danger of frost on the lateral support C30/37 XF4 XM1 C30/37 XF4 XM1 C25/30 XF1 C25/30 XF1 The installation examples / advise constantly are adapted to the technical conditions. With new editions older expenditures lose their validity. Before planning or installation please verify the current version at In building construction is a sealing layer below the channels necessary. ** Not for use in continousely frequented areas of carriageways or motorways as well as for areas frequented by busses or lorries/ trucks 75_ Date: RF-Mono-Rinne 100 H280 1m Einbaubeispiel Klasse D 400 in Beton Our general installation instructions apply. Format DIN scale Einbaubeispiel www V 5 A4 1:8 Unit 4, Frenchs Avenue LU6 1BH Dunstable / Bedfordshire Tel Fax technical@hauraton.co.uk A B C sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG 11

12 Installation example asphalt, class C250 D400 sp3.5 hauraton recyfix monotec SURFACE PRODUCTS PG Installation example in asphalted areas class C D 400 A 3-5 durable overhang Wearing course Binder course B Base course b d h Frost resistant sub-base C * h Channel height - 10 cm Category according to EN 1433 / DIN Foundation: with b / thickness d / height h (in cm) The named concrete quality is a minimum quality A 15 B 125 C 250 D 400** E 600 F / 15 / * 15 / 15 / * Applying to following systems: RECYFIX MONOTEC 100, 200 EN / DIN without danger of frost on the lateral support with danger of frost on the lateral support C20/25 X0 C20/25 X0 C25/30 XF1 C25/30 XF1 The installation examples / advise constantly are adapted to the technical conditions. With new editions older expenditures lose their validity. Before planning or installation please verify the current version at In building construction is a sealing layer below the channels necessary. ** Not for use in continousely frequented areas of carriageways or motorways as well as for areas frequented by busses or lorries/ trucks 75_ Date: RF-Mono-Rinne 100 H280 1m Einbaubeispiel Klasse D 400 in Asphalt Our general installation instructions apply. Format DIN scale Einbaubeispiel www V 9 A4 1:8 Unit 4, Frenchs Avenue LU6 1BH Dunstable / Bedfordshire Tel Fax technical@hauraton.co.uk A B C branches nationwide Support Office & Technical Services Disclaimer: While every effort has been made to ensure that the information in this document is correct and accurate, users of Hynds product or information within this document must make their own assessment of suitability for their particular application. Product dimensions are nominal only, and should be verified if critical to a particular installation. No warranty is either expressed, implied, or statutory made by Hynds unless expressly stated in any sale and purchase agreement entered into between Hynds and the user.