For when it really matters

Size: px

Start display at page:

Download "For when it really matters"

Evan Stephens
6 years ago
Views:

subaki of anada imited 0 rew Road, Mississauga, Ontario, ANAA J el: 90000 ax: 90090 ollree: 800088 www.tsubaki.ca email: info@tsubaki.

1 subaki of anada imited 0 rew Road, Mississauga, Ontario, ANAA J el: ax: ollree: info@tsubaki.ca orn to rule the orest orest Note: In accordance with the policy of subaki of anada imited to consistently improve its products, the specifications in this catalogue are subject to change without notice. lease contact subaki for current prices. opyright 0 subaki of anada imited. rrors and Omissions xcepted. isclaimer: subaki of anada imited makes every effort to ensure that the information in this catalogue is current and accurate, but cannot accept responsibility or liability for any loss or damage suffered as a result of information contained herein. or when it really matters 0 o r e s t r y r o d u c t s a t a l o g u e

hen experience really matters orestry grade is your expectation. o us this means providing products that meet some of the most demanding applications in the industry. eriod.

2 hen experience really matters orestry grade is your expectation. o us this means providing products that meet some of the most demanding applications in the industry. eriod. hock load, fatigue limit, abrasion, extreme speed, maintenancefree are all demanding conditions that subaki products excel at. Nobody has the range of products that meet orestry grade that subaki does. rive chains, conveyor chains with attachment, harp op chains, drag and mill chains, full range of sprockets, several types of bushings including ower ocks are all the products that suit the needs of orestry. You can rely on subaki s experience in field and technical support to provide solutions you need to increase production and reduce cost. Onsite training, application survey and trouble shooting, wear and failure analysis with recommendation are key services we provide to the orestry industry. ocumented cost savings are proof that our products and sales effort can work for you. All of this catalogue s print date proven cost savings in the orestry alone totaled $8,9.0 U. subaki quality means orestry Grade proven! or when it really matters roducts for the orestry Industry rive hains AM (ANI) tandard rive hain... peedmaster rive hain... 8 ambda elfubricating rive hain... 0 urved ambda rive hain... ambda elfubricating rive hain... uper eries hain... eries hain... uper eries hain... Neptune rive hain... 8 harp op hain harp op hain... 0 Attachment hains onveyor hain & Attachments Introduction... rimmer ug... tandard Attachment hain ingle itch... 8 tandard Attachment hain ouble itch... 0 Ordering Attachment hains... 8 hain & 99 8 hain & elded teel hains Mill & rag hain Introduction... Offset idebar Mill hain... traight idebar Mill hain... 8 Mill hain Attachments... 9 rag hain... rag hain Attachments... elded teel hain echnical iscussion... ngineered lass hain ool... prockets MadeoOrder prockets Introduction... 8 inished ore prockets (ize 800)... 0 Mill hain prockets... 8 rag hain prockets... 8 plit procket... 9 plit Adjustable procket... 9 Idler procket... 9 ushings plit aper ushings plit aper ubs... 8 Q tyle ushings... 8 tyle ushings... 8 tyle eldonubs... 8 ower ransmission omponents ower ocks... 8 hock Relays orestry Application pecific roduct awmill/laner ayout awmill ritical Applications elimber... 9 og Unscrambler... 9 ross ut lasher... 9 ebarker Infeed onveyor/ebarker... 9 og eck in and Infeed... 9 Main awline Infeed onveyor/main awline/ Optimizer/anter/Quad anter... 9 dger rimmer canner urved onveyor... 0 rop orter... 0 laner... 0 tacker/rapping Machine/orklift... 0 Other ignificant orestry Applications aper Mill Infloor aper Roll onveyor... 0 igester onveyor... 0 O Mill Rackdown onveyor efore ress... 0 ardwood looring Mill nd Groove rimmer... 0 M Mill M ooler hain... 0 iomass Ash onveyor... 0 Miscellaneous echnical ervices... 08

UAKI nvironmental Action lan ith its focus on manufacturing,uaki takes a unique approach to the challenges of environmental conservation.

e will remain mindful of environment in all our operations and contribute to the world through our workmanship.

In the interests of environmental conservation, we will use our creativity to exhibit industry leadership in reducing our environmental load.

e will strictly comply with environmental laws, rules, and regulations and will seek to develop good relationships with our stakeholders.

hen an environment in harmony with people and our planet really matters e are applying the collective expertise of the UAKI Group to an nvironmental Action lan that takes a global perspective.

are doing so as well. Ongoing fforts to Reduce Our nvironmental Impact e are reducing O emissions resulting from our energy consumption. e are implementing recycling and wastereduction initiatives.

Initiatives argeting coriendly roducts Our adoption of green procurement encompasses outsourcing of processing, production materials, and consumables.

nvironmental raining, ublic Relations and Other Initiatives e are enhancing our environmental website and are providing timely information about our operations.

lastic hain inisortv N hain id you know that many of UAKI s ecofriendly products are part of our daily lives?

Recyclable lastic hain y collecting and recycling used plastic chains, we are promoting resource conservation and the adoption of recycling.

In addition to featuring a compact configuration, low weight, and low energy consumption, these systems are designed for environmentally friendly disassembly, part sorting, collecting and recycling.

3 UAKI nvironmental Action lan ith its focus on manufacturing,uaki takes a unique approach to the challenges of environmental conservation. rinciple he UAKI Group believes that environmental conservation is a critical challenge facing humanity. e will remain mindful of environment in all our operations and contribute to the world through our workmanship. nvironmental olicy e will acknowledge the environmental impact of our operations, products, and services. In the interests of environmental conservation, we will use our creativity to exhibit industry leadership in reducing our environmental load. e will create a management system for environmental conservation and will promote pollution control and continual improvement. e will strictly comply with environmental laws, rules, and regulations and will seek to develop good relationships with our stakeholders. hrough environmental training and inhouse public relations, we will work to enhance awareness of environmental conservation among all UAKI Group employees. hen an environment in harmony with people and our planet really matters e are applying the collective expertise of the UAKI Group to an nvironmental Action lan that takes a global perspective. Accredited with IO 00 ertification for Our nvironmental Management ystem All UAKI Group workplaces in Japan have acquired IO 00 certification; a growing number of UAKI Group workplaces outside Japan are doing so as well. Ongoing fforts to Reduce Our nvironmental Impact e are reducing O emissions resulting from our energy consumption. e are implementing recycling and wastereduction initiatives. nsuring trict ompliance with nvironmental aws and Regulations e are instituting a management system at all our workplaces to ensure full compliance with local laws and regulations. Initiatives argeting coriendly roducts Our adoption of green procurement encompasses outsourcing of processing, production materials, and consumables. e incorporate environmentally friendly design into the product development stage. e are eliminating hazardous chemicals from our products. nvironmental raining, ublic Relations and Other Initiatives e are enhancing our environmental website and are providing timely information about our operations. Reducing O emissions with a highly efficient cogeneration system. his heat exchange system cools our injection molding equipment with heat from an electrical generator. lastic hain inisortv N hain id you know that many of UAKI s ecofriendly products are part of our daily lives? coriendly roducts Reduce, Reuse and Recycle are the three Rs of environmental conservation. e develop products and technologies that contribute widely to environmental conservation. Recyclable lastic hain y collecting and recycling used plastic chains, we are promoting resource conservation and the adoption of recycling. inisort orting ystems inisort systems incorporate linear motors that provide silent, ecofriendly sorting. In addition to featuring a compact configuration, low weight, and low energy consumption, these systems are designed for environmentally friendly disassembly, part sorting, collecting and recycling. co hain eries N chain is highly corrosionresistant chain with a surface coating free from designated hazardous chemicals (Ro irective compliant). his product series also includes our ambda Roller hain, which offers superior oilfree and longlife characteristics; plastic roller chain, which features lownoise operation achieved with our proprietary engineering plastic technology, and stainless steel water processing chain, a fieldproven product that has earned an excellent reputation after decades of successful use in wastewater treatment facilities throughout Japan. roducts for the nvironmental Market ater reatment acilities and quipment Our sewage treatment facilities and equipment help maintain the water quality in water treatment facilities throughout Japan. onveyors for the nvironmental Market Our conveyance devices for environmental facilities are used in applications such as waste incineration and processing of industrial waste, household refuse, and sludge. And with equipment provided by UAKIMOO ulk ystems orporation and UAKIMOO Mayfran Inc., we provide metal conveyance and coolant processing equipment for metal machining and processing applications. learly, our conveyor products are meeting the needs of the environmental market.

4 subaki Global Network herever you are in the world, our production and sales network is able to provide your business with the immediate support it needs. subaki rofile U.. subaki, Inc. (U) subaki of anada imited subakimoto urope.v. Korea onveyor Ind. o., td. subakimoto Automotive (hanghai) o., td. U ortland lant U olyoke lant U andusky lant U hicopee lant subakimoto ingapore te. td. subakimoto Automotive (hailand) o., td. aiwan subakimoto o. subaki Australia ty. imited

AM (Ansi) standard drive chain hen innovation really matters subaki s atented Ring oining Generates Unsurpassed onnecting ink trength subaki s atented ube Groove ushing xtends ear ife and erformance

and Allowable oad that xceeds AM (ANI) tandards erformax M ushings he cience ehind subaki. ear ife* ear longation (%)..0 0. revious subaki subaki hain has I the ife.

Advanced technology allows us to combine the reliability of a solid bushing with our patented lube groove on the inner surface.

R idth etween Inner ink lates hickness ink late eight eight h ia, + Note: R, R, R and R are also available. All sizes available up to six strands.

5 AM (Ansi) standard drive chain hen innovation really matters subaki s atented Ring oining Generates Unsurpassed onnecting ink trength subaki s atented ube Groove ushing xtends ear ife and erformance recision Riveting rocess elps to ithstand ide oad Impact R ingle itch O O h φ φr ong asting olid Rollers rovide Greater atigue ife and urability at igh peeds ide aist ink lates rovide ensile trength and Allowable oad that xceeds AM (ANI) tandards erformax M ushings he cience ehind subaki. ear ife* ear longation (%) revious subaki subaki hain has I the ife. New subaki Operating ime (ours) *sizes R800 Improved orsepower Rating* orsepower () % erformace Increase R..M. Our atest Innovation subaki erformax M ushings. Advanced technology allows us to combine the reliability of a solid bushing with our patented lube groove on the inner surface. Available in sizes R80 to 0, you get outstanding performance in your application. elivering % More orsepower. revious subaki New subaki *sizes R80R0 hain ingle trand itch Roller ia. R idth etween Inner ink lates hickness ink late eight eight h ia, + Note: R, R, R and R are also available. All sizes available up to six strands. pring clip type connecting links will be provided for R to R0 unless otherwise specified. in Offset in ransverse itch AM (ANI) td. Minimum ensile trength subaki Minimum ensile trength subaki Average ensile trength Allowable oad R ,0,90, R ,880,80,00,0 0.0 R ,00 9,00 9,900,980.0 R ,00,00,00, ,0,980,00, ,0,0,00, ,80,0 8,00 9, ,000,00,00, ,80,0 8,90,0 9.0 R ,0 9,00 0,00,00.0 R ,00 9,00,000,0. ouble trand R ,0,90 8,80, R ,0,0,080,0.9 R ,00 8,00 9,800,0.0 R ,000,0,00, ,00,90,800 8, ,0,0,800, ,0 8,80 9,800, ,000,00,00 0, ,0 0,90,880,90. R ,0 9,00,00,00.8 R ,000 9,00 08,000,0. riple trand R ,0,880,80,00.8 R ,0 9,0,0,80.0 R ,090,00 9,00,90.0 R ,00 8,80,800 8, ,90,90 9,00, ,0 99,0,00, ,80 0,00,00, ,000,00 88,00 9, ,80,8 88,0,00. R ,0 8,00,800 0,0.8 R ,00 9,00,000,0.9 eight (lbs./ft.)

peedmaster rive hain Application: hip onveyor rive avings: $,9.

Installing peedmaster increased life from. to 9 months. It really mattered to this subaki customer O AVING! igh speed and huge shock.

subaki s exclusive peedmaster chain features the best combination of heat treatment and materials to withstand the harsh conditions of every

tarting with a throughhardened pin to endure heavy shock loading, the pin is then specially coated to withstand the wear caused by high speeds

inally the G solid lubegrooved bushing is employed to trap lubricant where it is needed most bearing area between pin and bushing.

h φ Quadriveted φr Quadriveted erformax ushing olid onstruction ubegrooved ushing peedmaster in hroughhardened for strength and specially

+ in ransverse itch Average ensile trength Allowable oad eight (lbs./ft.) hain ingle trand R0M 0.0 0.9 0.00 0.09 0. 0. 0..08 0.0 0.8 9,900,980.

6 peedmaster rive hain Application: hip onveyor rive avings: $,9.00 subaki solution: ritical drive in a confined remote location, replacement time is hours. peed and contamination. Installing peedmaster increased life from. to 9 months. It really mattered to this subaki customer O AVING! igh speed and huge shock. hese are some common operating conditions for awmill applications that roller chains need to deal with. subaki s exclusive peedmaster chain features the best combination of heat treatment and materials to withstand the harsh conditions of every sawmill. tarting with a throughhardened pin to endure heavy shock loading, the pin is then specially coated to withstand the wear caused by high speeds and finished off with hepherd s rook onn ink to withstand vibration. inally the G solid lubegrooved bushing is employed to trap lubricant where it is needed most bearing area between pin and bushing. peedmaster Altogether, peedmaster is simply the best chain for a sawmill s highspeed, heavy shockloading applications. O N! h φ Quadriveted φr Quadriveted erformax ushing olid onstruction ubegrooved ushing peedmaster in hroughhardened for strength and specially plated to withstand wear itch Roller ia. R idth etween Inner ink lates hickness ink late eight eight h ia. + in ransverse itch Average ensile trength Allowable oad eight (lbs./ft.) hain ingle trand R0M ,900, R80M ,00, M ,00, M ,00, M ,800 9, ouble trand R0M ,800,0.0 0 R80M ,00, M ,00 8,0. 9 0M ,00, M ,00, Note: orsepower ratings for peedmaster chain are the same as the identical size of subaki R tandard AM (ANI) roller chain of links per 0 feet 8 9

ambda elfubricating rive chain Application: tar eeder avings: $,.00 subaki solution: revious chain elongated due to lack of maintenance/lubrication. hain failed causing downtime after months.

liminate product contamination. Reduce downtime. φ φr h #0 to #80 #00 to #0 pecial OilImpregnated ushing Roller ambda hain (td.

7 ambda elfubricating rive chain Application: tar eeder avings: $,.00 subaki solution: revious chain elongated due to lack of maintenance/lubrication. hain failed causing downtime after months. elflubricated ambda lasted 0 months. It really mattered to this subaki customer O AVING! ambda chain increases productivity and saves money. R ingle itch ambda rive hain Reduce maintenance time. liminate product contamination. Reduce downtime. φ φr h #0 to #80 #00 to #0 pecial OilImpregnated ushing Roller ambda hain (td.): Inner/Outer plates are black oxide ambda hain (Nickel lated): All nickelplated (except bushings) ong life and low maintenance ambda chains use special oilimpregnated bushings to provide lubrication and to prolong wear life. Ambient emperature: 0 o to +0 o (+ o to +0 o ) 0. ear longation (%) 0 AM (ANI) tandard R Roller hain Operation ime ambda More than times the wear elongation life of AM (ANI) tandard Roller hain (N.. #0 and #0 have times the life of AM (ANI) tandard R rive hain). Interchangeable ambda chain is interchangeable with AM (ANI) standard drive chain. owever, as the pins are longer than that of tandard R Roller hain, please make sure that there is no interference with the machine. Operating emperature 0 O to +0 o (+ o to +0 o ) procket or single strand, AM (ANI) tandard Roller hain can be used. or double strand, heavy sprockets must be used. arbon teel hain ingle trand itch Roller ia. R idth etween Inner ink lates hickness ink late hickness eight eight h ia. + in Offset in ransverse itch Average ensile trength Allowable oad R0 AMA , R0 AMA ,00,0 0. R0 AMA ,900, R80 AMA ,00, R00 AMA ,00,00.88 R0 AMA ,00,80.9 R0 AMA ,00 9,00. ouble trand (eavy) R0 AMA ,80, R0 AMA ,080,0.9 R0 AMA ,800,0.0 9 R80 AMA ,00,0. 9 R00 AMA ,800 8,00. eight (lbs./ ft.) Allowable peed (ft./min.) 0

r urved ambda elfubricating rive hain ambda elfubricating rive hain hen cleanliness really matters urved ambda rive hain onger () ife than Original ambda Roller hain ambda features an oilimpregnated

asic onstruction Outer late elt eal elt eal elt eal elt eal Roller pecial Oil Impregnated ushing onnecting ink late lip (or #80 size and above the pin is a cotter pin type) Inner/Outer lates:

eight (lbs./ft.) R0UAMA 0.00 0. 0. 0.09 0. 0.09 0. 0. 0.8,0 0 0. R0UAMA 0. 0.00 0. 0.09 0.9 0. 0.8 0.0 0. 0,0 0 0.8 R0UAMA 0.0 0.9 0.00 0.09 0. 0..08 0.0 0.,0 900 0.9 R80UAMA.000 0. 0. 0. 0.99 0.89.

8 r urved ambda elfubricating rive hain ambda elfubricating rive hain hen cleanliness really matters urved ambda rive hain onger () ife than Original ambda Roller hain ambda features an oilimpregnated felt seal that provides more than times the wear life of ambda roller chain. (Inhouse comparison at 0 o to +0 o (+ o to +0 o )). asic onstruction Outer late elt eal elt eal elt eal elt eal Roller pecial Oil Impregnated ushing onnecting ink late lip (or #80 size and above the pin is a cotter pin type) Inner/Outer lates: lackened Attaching the connecting link R φ φr h h hain itch Roller iameter R idth etween Inner ink lates hickness ink late eight eight h + in Radius r Average ensile trength Allowable oad Approximate eight (lbs./ft.) R0UAMA , R0UAMA , R0UAMA , R80UAMA ,000,. hain itch Roller ia. R idth etween Inner ink lates hickness ink late hickness eight eight h R0 AMA ,00,80.9 Note: ambda has no offset links. ia. + in Average ensile trength Allowable oad eight (lbs./ft.) R0 AMA , R0 AMA ,00,0 0. R0 AMA ,900, R80 AMA ,00, R00 AMA ,00,00.88 Allowable peed (ft./ min)

UR RI AIN Application: Outdoor og kinner at a oardmill avings: $,0.00 subaki solution: Original installation used standard drive chain. igh loads caused failure after only. months.

subaki offers UR eries roller chains for applications that exceed the capabilities of subaki AM (ANI) tandard Roller hain. hese heavy duty conditions include the following:.

A UR eries hain will often deliver the same tensile strength of a larger size of AM (ANI) tandard Roller hain.

9 UR RI AIN Application: Outdoor og kinner at a oardmill avings: $,0.00 subaki solution: Original installation used standard drive chain. igh loads caused failure after only. months. hain section was done by subaki selecting uper0 resulting in. months life. It really mattered to this subaki customer O AVING! subaki offers UR eries roller chains for applications that exceed the capabilities of subaki AM (ANI) tandard Roller hain. hese heavy duty conditions include the following:. evere operating conditions such as heavy shock loads.. here space to put the chain is limited. A UR eries hain will often deliver the same tensile strength of a larger size of AM (ANI) tandard Roller hain.. Operating conditions that require higher horsepower ratings, maximum allowable load and tensile strength. UR eries he dimensions of this series are identical to those of AM (ANI) tandard roller chain. he special design of the UR series link plates delivers exceptional performance. he pitch holes are critically formed and drifted to improve their allowable tension by %0% and the pins are throughhardened for greater shock resistance. UR series chains offer horsepower ratings 0% greater than the omparison of ensile trength and Allowable oad ensile trength omparison AM (ANI) tandard R Roller hain UR Roller hain Roller hain UR Roller hain 00 Allowable oad omparison AM (ANI) tandard Roller hain UR Roller hain Roller hain UR Roller hain equivalent size of AM (ANI) tandard chain. UR series chains can be used to replace the next larger size of AM (ANI) tandard chain, making it ideal for applications where space is limited. eries eries chains provide a (%0%) greater ultimate tensile strength over AM (ANI) tandard roller chain by using throughhardened pins and link plates of the next larger AM (ANI) tandard chain sizes. eries chains also provide a greater shock load resistance. eries chains also provide a greater shock load resistance and are best suited for low operating speeds up to ft./sec. UR eries he thickness of UR series link plates is the same as the next larger size of UR series chain. he pins are also throughhardened which provides a % greater ultimate tensile strength and % greater allowable tension than UR series chain. UR series chains can be used to replace the next largest size of AM (ANI) tandard chain, making it ideal for applications where space is limited. It is best suited for low speed operating conditions up to ft./sec. 9 omparison of tensile strength (average tensile strength) using AM (ANI) tandard Roller hain as a base. omparison of maximum allowable load (average maximum allowable load) using AM (ANI) tandard Roller hain as a base. 0 uper eries hain Roller ia. R idth etween Inner ink lates ink late in ransverse itch Average ensile trength Allowable oad hain itch hickness eight eight h ia. + ingle trand UR ,0,80.9 U ,00,80.9 U ,800 8,800. U ,000,00. U ,00,80. UR ,00,0.8 UR ,000 9,00. ouble trand UR ,80,0.8 U ,00,9. U ,00, U ,000 0,0 0. U ,800,98. UR ,00,90. UR ,000 0,90.0 riple trand UR ,0 0,0. U ,800,00 8. U ,00,000. U ,000 0,0.0 U ,00 9,00. UR ,900,800. UR ,000,0.0 Notes:. our pitch offset link is available for single strand.. Riveted type chain will be provided unless otherwise specified. Roll pin type chain will be provided upon requested.. emi pressfit type connecting links will be supplied. h h φ h φr eight (lbs./ft.)

ht RI AIN uperh RI AIN hen strength really matters eries hain uper eries hain φ φr h h h φ φr h lle ia it eteen nne ink late ink late in ent ent ent anee it eae e nile tent l ai llale a l ain e it

. emi pressfit connecting links will be supplied as standard. lipfit connecting links are also available upon request. e it lt itch Roller ia.

10 ht RI AIN uperh RI AIN hen strength really matters eries hain uper eries hain φ φr h h h φ φr h lle ia it eteen nne ink late ink late in ent ent ent anee it eae e nile tent l ai llale a l ain e it ikne eit eit ia inle tan le tan ile tan Notes:. Riveted type chain will be provided unless otherwise specified. ottered type chain is available upon request.. emi pressfit connecting links will be supplied as standard. lipfit connecting links are also available upon request. e it lt itch Roller ia. R idth etween Inner ink lates hickness ink late eight eight h ia. in + ransverse itch Average ensile trength Allowable oad hain ingle trand UR ,000,0 U ,0,0 U ,000 9,0 U ,00,0 U ,00,00 UR ,00,00 UR ,800,0 ouble trand UR ,000,8 U ,0, U ,000,08 U ,00,9 U ,00 8,00 UR ,00 8,080 UR ,00,08 riple trand UR ,000,0 U ,80 8,0 U ,000,0 U ,00,900 U ,800,0 UR ,00,000 UR ,00 8,00 Notes:. Offset links are not available.. Riveted type chain will be provided unless otherwise specified. Roll pin type chain will be provided upon request.. emi pressfit type connecting links will be supplied. eight (lbs./ft.)

NUN RIV AIN hen durability really matters N: he cience ehind subaki Neptune hain provides corrosion protection that works better and lasts longer than ever before.

11 NUN RIV AIN hen durability really matters N: he cience ehind subaki Neptune hain provides corrosion protection that works better and lasts longer than ever before. subaki s exclusive N coating process is a multilayer anticorrosive shield that provides bestinclass protection. Neptune Antiorrosive rive hain φ h φr O O Resin op oating Zinc/Aluminum oating Zinc oating onger asting in/ushing/lates Other brand hain urface Zinc/ilica oating Zinc oating Roller hain urface he result of salt spray testing 00 ours Operating temperature range is between 0 ~+0. UAKI N R0 hain itch Roller ia. idth etween Inner ink lates hickness ink late eight eight h ia. + in 00 N Offset in 800 N ransverse itch Average ensile trength Allowable oad eight (lbs./ft.) ingle trand 0N ,900, N ,00, N ,00, N ,00, N ,00 9, ouble trand 0N ,800, N ,00, N ,800 8,0. 9 0N ,800, N ,800, of links per 0 feet ougher han he Rest Neptune s innovative coating process avoids the use of high temperatures which can contribute to weakening of the chain s components. Neptune has the same load ratings as subaki carbon steel chain, ensuring maximum performance. Neptune ambda rive hain Antiorrosive elfubricating rive hain ambda chain uses special oil impregnated bushings to provide lubrication and to prolong wear life. h φ φr O Allowable oad arbon teel hain 00% Neptune hain 00% Zincin Alloy oated hain 8% acrotized ZincAluminum oated hain 00% Nickel lated hain 8% tainless teel % Note: he high temperature coating process that is used on acrotized coated chain causes the chain to lose about % of its tensile strength. hain itch Roller ia. R idth etween Inner ink lates hickness ink late hickness eight eight h ia. + in Offset in Average ensile trength Allowable oad R0 N AMA ,900, R80N AMA ,00, N AMA ,00, N AMA ,00, N AMA ,00 9,00. 8 eight (lbs./ft.) of links per 0 feet Allowable peed (ft./ min.) 8 9

subaki has created the perfect specification to exceed your expectation.

12 sharp top chain hen grip really matters harp op hains An essential component in the primary and secondary breakdown of a sawmill operation. You need premium performance to resist high wear and shock loads. subaki has created the perfect specification to exceed your expectation. ommon roblem: orn ips olution: Induction ardened ips orn tips are a major cause for chain replacement. subaki s new design results in a 0% increase in wear resistance without compromising strength, offered as standard. xpect more from subaki. N! 0

13 sharp top chain hen grip really matters N! R Y ize: R R Y ize: R Y izes: 0, 80, 00, 0 A Y izes: 0, 80 Y ize: 80 A Y ize: 80 IZ: R h h h h h h h h h h h h h h h h IZ: 0, 80, 00, 0 h h h IZ: 0, 80, 00 h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h Y (R00) ize: 00 Y (R80) ize: 80 A Y (shown here) and 8A Y (as above except point on every 8th pitch) izes: 80, 00 Y izes: 80,00 IZ: 80 h h h h h h IZ: 80 h h h h R R h h h h h h h h harp op hain pecifications hain itch Roller ia. R idth etween Inner ink lates hickness Middle ink late hickness M ink late eight eight h eight h ooth eight h ia. + in straight points on every second pitch & extended flat side bar R RNAR straight points on every second pitch & extended flat side bar R straight points on every second pitch straight points on every pitch 0A A A A straight points on every second pitch straight points on every pitch 80A A A A slasher points on every second pitch slasher points on every second pitch opposite slant point on every th pitch 00A opposite slant point on every 8th pitch 808A right slant point on every th pitch Riveted in ( x ) Ref. ransverse itch eight (lbs./ ft.)

INROUION O conveyor chain & attachments hen selection really matters Attachment hains

Attachments are simple additions to the standard roller chain that allow fixtures to be

MadeoOrder Attachments hether you need to push, carry, pull, drag, drop or position,

hain ype ize Attachments elivery ingle itch: tandard ambda ouble itch, tandard Roller:

K A 0 K 0 0 0 08 0 A K A K A K A K A K A K eek* up to 00 ft.

14 INROUION O conveyor chain & attachments hen selection really matters Attachment hains add functionality to standard roller chain for conveying objects. Attachments are simple additions to the standard roller chain that allow fixtures to be secured to pull, push, transfer, carry, or otherwise move your lumber. MadeoOrder Attachments hether you need to push, carry, pull, drag, drop or position, trust subaki to fabricate and assemble your MO attachments. hain ype ize Attachments elivery ingle itch: tandard ambda ouble itch, tandard Roller: tandard ambda ouble itch, arge Roller: tandard ambda 0 K 0 A 0 K A 00 K A 0 K A K A K A K A K A K A K eek* up to 00 ft. Rush assembly service available, contact your subaki distributor for details. *ubject to stock availability and prior sale. pecial usher K attachment with plastic fixture rimmer ug urved usher

15 rimmer ug hen improvement really matters rimmer ug rimmer ugs are used to convey sawn wood through the scanner, trimmer and several other operations in a sawmill. subaki is pleased to offer two types of rimmer Attachment: the traditional welded type () and the new quick change style (Q). N IGN! 8QA00M ow o Order: xample 8 ow o Order ell heet escription hain ize Modular pin design for quick roller replacement. Attachment is on a connecting link for quick change out and repair. No need to weld. tandardize operations and reduce inventory on replacement parts. Q Modular in tyle rimmer ug* O O Q A 0 ier Attachment ype Roller ype Attachment pacing lank cono remium ambda Q Quick rimmer ug (Modular in tyle) elded rimmer ug A ee page ee page xx very xx ink (e.g. 0 = every 0th link) Note: () If spacing is even, attachment is supplied on the pin link unless otherwise instructed. If spacing is odd, attachment alternates on the pin link and roller link. In the case of Q attachment odd spacing will be supplied on the pin link using an offset link. lank upply in 0ft strands Roller tyle A Roller tyle O O M Option xx xx itch trands (e.g. 0 = 0 trand) Note: () otal chain length should be divisible by the attachment spacing. () hain will be supplied in suitable lengths for shipping with a conn link at each section. M Matched and agged tands Recommended for all multistrand timed applications..g. canner, rimmer, rop orter *atent pending. elded tyle rimmer ug O elded usher N Roller tyle A Roller tyle AING O O Note: rimmer ug will be welded on to the pin link or roller link depending on spacing requirements. pecify standard dimensions (O or A) when ordering. subaki also offers various sizes of trimmer lug weldon attachments. ontact subaki for more information. eight, hickness, idth, N pacing imension escription otal height from top of chain to bottom of attachment hickness of attachment Attachment width Attachment spacing: May be supplied in number of pitches or links or as dimension shown above.

16 ANAR AAMN AIN hen expedience really matters R ingle itch tandard Attachment hain subaki R single pitch roller chains may be adapted to conveying applications by the addition of attachments. he standard attachment types include bent or straight type attachments on one or both sides, extended pin and wide contour attachments. subaki stocks a wide variety of assembled chain and components. R ingle itch tandard Attachment hain A Attachment K Attachment A Attachment K Attachment φ φr h Attachment Attachment hain itch Roller ia. R idth etween Inner ink lates hickness ink late eight eight h ia. Note: pring clip type connecting links will be provided for R to R0 unless otherwise specified. in Average ensile trength Allowable oad R , R , R ,00,0.0 R ,00, ,00, ,000, ,900, ,000 9,90. + App. eight (lbs./ft.) Attachment imensions Additional t. per Attach. hain mber s A A Attach. Attach. Attach

ANAR AAMN AIN hen convenience really matters ouble itch tandard Attachment hain tandard Roller ype ouble itch tandard Attachment hain subaki double pitch roller chain may be adapted to conveying

17 ANAR AAMN AIN hen convenience really matters ouble itch tandard Attachment hain tandard Roller ype ouble itch tandard Attachment hain subaki double pitch roller chain may be adapted to conveying applications by the addition of attachments. he standard attachment types include bent or straight type attachments on one or both sides, extended pin and wide contour attachments. subaki stocks a wide variety of assembled chain and components. φ φr A Attachment A Attachment N N K φo φo φ φr φ φr Oversize Roller ype φ φr K Attachment K Attachment lle ia it eteen nne ink late ink late in ent ent ent eae enile tent l ai llale a l eit lt ain e it ikne eit ia tana lle e eie lle e φ N φo φr A, A, K and K Attachment imensions Additional t. per Attach. hain A K mber K Attachment Attachment φ N K φo φr 0

or otter in construction ) ype of attachment ) pacing of attachment K Attachment φo N K Attachment φo N K Attachment spacing is counted as being the number of links (both inside and outside) up to

18 ANAR AAMN AIN ORRING AAMN AIN I AY! hen value really matters ouble itch tandard Attachment hain o order attachment chain, please provide the following: A Attachment φo N A Attachment φo N K ) ize of chain (0, 0, 0) ) Material ) Rivet or otter in construction ) ype of attachment ) pacing of attachment K Attachment φo N K Attachment φo N K Attachment spacing is counted as being the number of links (both inside and outside) up to and including the next attachment. In the nonstandard spacing example to the right, initial spacing is every nd () and then every th (). ach repeating section is 8 pitches (8). 8 A RA All standard attachment chain orders are to be confirmed with a schematic for the customer s review. ) Overall length of chain A, A, K and K Attachment imensions Additional t. per Attach. hain mber K A Attachment K Attachment Attachment Attachment φ φr φ φr AM (ANI) pecial Attachments In addition to providing standard attachment chain, subaki of anada can modify existing attachments to match your requirements. An example of this could be a shorterthanstandard pin or a larger hole diameter. If modifying standard attachments, delivery can be weeks depending on the quantity. hen specifying nonstandard attachments, information required is: tab length, width and possibly height hole diameter and type of hole (threaded, countersunk) pin diameter, projection (extension) length, type of end (threaded, circlip groove) A NG O A I All nonstandard attachment quotes will be accompanied by a drawing for customer approval. IN ROJ. IN A IG hain Attachment imensions Additional t. per Attach. Attachment Attachment If you don t see what you are looking for ask subaki!

8 AIN & 99 hen choice really matters 8 hain R he Many aces of 8 hy choose one over the other? 8 is at the heart of every modern sawmill operation.

At subaki we are proud to offer three tiered levels of 8 quality: Roller iameter R idth etween Inner ink lates ink late in Average ensile trength eight (lbs./ft.

09 0.90.00 0. 0.89. 0.. 0.998.8,000. 8.09 0.90.00 0. 0.. 0..0 0.9.,000. 99 8 cono 8 remium 8 ambda ier Key eatures Key Applications An economical version that meets the general need of nontimed sawmill applications.

Improved material & heat treatment recision and consistency of fabrication & assembly Oil impregnated sintered metal bushing for lubefree operation.

19 8 AIN & 99 hen choice really matters 8 hain R he Many aces of 8 hy choose one over the other? 8 is at the heart of every modern sawmill operation. his versatile chain is available in many grades of quality. At subaki we are proud to offer three tiered levels of 8 quality: Roller iameter R idth etween Inner ink lates ink late in Average ensile trength eight (lbs./ft.) itch hickness hickness eight iameter hain + 8 cono , remium , cono , remium , ambda , , cono 8 remium 8 ambda ier Key eatures Key Applications An economical version that meets the general need of nontimed sawmill applications. uilding upon the strength of the 8 design, remium offers better performance on multistrand timed conveyors where relative length tolerance and rate of stretch is critical. Improved material & heat treatment recision and consistency of fabrication & assembly Oil impregnated sintered metal bushing for lubefree operation. times longer life than unlubricated chain ame precision of material, heat treatment, fabrication and assembly as 8 remium. Nonimed onveyors: ransfers Multistrand imed onveyors: canner rimmer rop orter Multistrand imed onveyors: rop orter rimmer canner Any application where contamination of the product must be avoided 99 chain is an 8 pitch version of 8 chain and is used for lumber conveying. It is typically used in drop sorter applications. umber is conveyed using Jbar attachments on the chain. subaki can install the Jbars on the chain. subaki can also supply sprockets to work with 99 chain. lease contact subaki echnical upport for more information IN AR QUA RIV.00.0 φ Note that 8 ambda chain has a slighter wider profile than remium or cono

INROUION O MI & RAG AIN Application: hip ruck umper avings: $8,0.00 subaki solution: After the first year of operation, only link of subaki was taken out vs.

One of the backbones of forestry operations, elded teel hain operates in some of the most demanding applications. he inherent design provides high tensile and fatigue strength.

uilding upon the basic design, subaki s elded teel idebars and arrels are shot peened for additional fatigue strength. ins are precision fit for a superior press fit into the side bar.

with extended wear life pin. eight in ia. Overall hain idth of earing ffective istance etween elds R arrel ia. R Average ensile trength Allowable oad R8.09 0.0. 0.0.00.00.00 0.8 0,000,00. 8.09 0.0. 0.0.00.00.00 0.8,000,00.

0.000 0..0 0....0. 0,00 8,00. 0.000 0..0 0....0. 0,0,000. 0.000 0..0 0..8.00.88.,000,800. 0.000 0..0 0..8.00.88. 0,000,000..00 0.00.00.00.... 8,00,00..00 0.00.00.00....,000 0,00. 0.00 0.00.0.00.0..00. 00,000 9,000.

20 INROUION O MI & RAG AIN Application: hip ruck umper avings: $8,0.00 subaki solution: After the first year of operation, only link of subaki was taken out vs. links of the previous competitor install over that time period. ull life resulted in months vs. 9 with less maintenance costs. It really mattered to this subaki customer O AVING! One of the backbones of forestry operations, elded teel hain operates in some of the most demanding applications. he inherent design provides high tensile and fatigue strength. his brute of a chain must withstand high shock loading, provide resistance to abrasive material and operate in extreme temperatures and climates. uilding upon the basic design, subaki s elded teel idebars and arrels are shot peened for additional fatigue strength. ins are precision fit for a superior press fit into the side bar. recision ress it ins Increase wear resistance hot eened idebars and arrels rovide additional fatigue strength O IAR MI AIN Offset idebar Mill hains hain itch hickness idebars *IR is produced standard with extended wear life pin. eight in ia. Overall hain idth of earing ffective istance etween elds R arrel ia. R Average ensile trength Allowable oad R ,000, ,000,00. R ,000,00. R ,000, ,000,000.0 *IR ,00 8, ,000 9, ,00 9, ,00, ,00 8, ,0, ,000, ,000, ,00, ,000 0, ,000 9, ,000 0, ,000, ,000 9, eight (lbs./ft.) xtra eavy uty Offset idebar Mill hains hain itch hickness idebars eight in ia. Overall hain idth of earing ffective istance etween elds arrel ia. R Average ensile trength Allowable oad R ,000, ,000,000. R ,00 8, ,00 9, ,00, ,000 0, ,000, ,000 0, ,000 0, ,0 0,00. Notes:. R: Offset sidebar style, with heat treated rivets.. : Offset sidebar extra heavy duty series, with all parts heat treated.. : Offset sidebar series, with all parts heat treated.. If extended wear life pin is required subaki can supply IR or IR as an option for all chain on this page.. R: Offset sidebar extra heavy duty series, with heattreated rivets.. Riveted type connecting pins are supplied as standard cottered upon request. eight (lbs./ft.)

RAIG I AR MI AIN MI AIN AAMN hen consistency really matters K Attachment K Attachment J J O N N K R O traight idebar Mill hains idebars hain idth of earing ffective istance etween Allowable oad hain

00 0.0.00.00.0...,800,00. 0.00 0.0.0.00.0... 0,000 9,000. Attachment hain J J N K O R8.00. 0.8.. 0.8 0.88 0. 0.0 R8.00. 0.8.. 0.8 0.88 0. 0.0 R8.8.0 0.0.. 0.8 0.88 0. 0. R8.8.0 0.0.. 0.8. 0.8 0...00 0.88.00. 0.8. 0.8 0...00 0.88.00. 0.0.0 0.0 0..8.8.00.00. 0.8. 0.8 0...00...00 0.0.0 0.0 0.88..00...00 0.0.0 0.0 0.88 0... 0.0. 0.0 0.0 O K K xtra eavy uty traight idebar Mill hains idebars hain idth ffective istance in of etween arrel Ultimate Allowable hain itch hickness eight ia.

21 RAIG I AR MI AIN MI AIN AAMN hen consistency really matters K Attachment K Attachment J J O N N K R O traight idebar Mill hains idebars hain idth of earing ffective istance etween Allowable oad hain itch hickness eight in ia. Overall elds arrel ia. R Ultimate trength eight (lbs./ft.) R ,000, ,00 8, ,000 8, ,00 8, ,00 8, ,00 8,00. IR ,800, ,000 9,000. Attachment hain J J N K O R R R R O K K xtra eavy uty traight idebar Mill hains idebars hain idth ffective istance in of etween arrel Ultimate Allowable hain itch hickness eight ia. Overall earing elds ia. R trength oad eight (lbs./ft.) R ,00 8, ,000, ,000, ,000 0,000. Notes:. R: traight sidebar style, with heat treated rivets.. R: traight sidebar extra heavy duty series, with heat treated rivets.. : traight sidebar series, with all parts heat treated.. : traight sidebar extra heavy duty series, with all parts heat treated. K K eight hain K K Q R O (lbs./ft.) R R R R Q R 8 9

22 MI AIN AAMN hen option really matters R Attachment (R8, R8 & R8 only) IRION O RAV G K K K J RR Attachment J G IRION O RAV t. (lbs/ft) hain G J K R RR R R R R og radle Attachments tyle A Y I Z tyle tyle I Y I Z Attachment A itch itch G IRION O RAV weight hain A G (lbs./ft.) Y Z tyle A tyle tyle pecial tyle hain itch Y Z Y Z Y Z Y Z A Attachment A lotted Attachment A A O G A Attachment A lotted Attachment hain A O hain A G R / / / / / / R /8 / / / / / / / / / / /8 /8 / / / / All items are also available in eries, fully heat treated, and/or plus IR / IR induction hardened options. abular dimensions and weights are approximate and nonbinding. esign improvements may result in variations to published figures. Verification is recommended. 0

23 RAG AIN RAG AIN AAMN hen versatility really matters rag hains move very heavy loads. hey provide efficient and economical service when used in drag conveyor applications such as those involving chips and sawdust. ike Mill hains, rag hains combine strength, precision, impact resistance and wear resistance. his versatile and economical chain is built to withstand punishing shock loads and abrasive conditions to provide longer wear life in your operation. rag hain idebars hain idth ffective istance in of etween Ultimate Allowable itch hickness eight ia. Overall earing elds trength oad eight hain (lbs./ft.) ,000 0, ,000 0, ,000 0, ,000 8, ,000 0, ,000 0, * ,000, * ,800, * ,000, * ,000, * ,000,8 0.0 R ,000, ,000 0, *Also available in pin diameter. eavy uty and uper og tyle rag hain hain itch hickness idebars hain idth eight in ia. Overall of earing ffective istance etween elds Ultimate trength Allowable oad eight (lbs./ft.) ,000, ,000, ,000, ,000,000.0 R ,000, uper og style olded ing Attachment A /,, and Attachments / Attachments nd view of drag chain barrel / is welded to barrel face. J M, and Attachments hain /* J J J J *Note: / attachments are welded on front barrel.,, attachments are welded on top of barrel. / attachments do not extend above sidebar height. hain A * J M *he nominal dimension is shown in the chart. lease specify exact width required when order is placed. J

It really mattered to this subaki customer O AVING! trength orrosion ear Installation hy/when do you use " pin for drag chain vs standard (.88)?

24 elded eel hain technical discussion Application: Outdoor hip onveyor avings: $,00.00 subaki solution: owntime savings were realized on this outdoor conveyor with subaki life resulting in months compared to previous brand at months. It really mattered to this subaki customer O AVING! trength orrosion ear Installation hy/when do you use " pin for drag chain vs standard (.88)? A larger diameter pin will decrease the bearing pressure of the same chain as the forces are spread over a larger surface. his allows the chain to withstand larger loads over the same chain footprint. asically, a larger pin will allow larger tensions and loads to be transmitted by the same chain over a smaller pin diameter. hy go with uperhog? uperhog has the same strength as the 80 base chain except that it comes complete with a thicker barrel. his added thickness provides extra strength, resistance to crushing forces and additional life as the barrel will have more material to wear through. hat options are available to eliminate corrosion? elded steel chains are generally used in very demanding applications. hese applications are often outdoors, creating an environment conducive to corrosion. In order to eliminate corrosion, a plating or coating can be used to prevent and/or reduce the rate of corrosion. subaki s A (Antiorrosion oating) can be applied to assembled chain to maximize the life of your chains. hy/when use IR, IR? IR/IR (Induction ardened arrels & Rivets, ideplates) is a heat treatment that will give a chain increased wear properties. he parts are initially through hardened and then induction hardened to a higher hardness, which will allow the parts to wear longer in abrasive conditions. hat is considered the proper direction of travel open end or closed end and why? here is no rule for the proper direction of chain travel. or interference concerns, the barrel end should be run first so that if the chain contacts something, it will be pushed out of the way rather than pulled in and potentially jam the chain or damage the chain and/ or other parts. or wear concerns, it is recommended that the open end be run first. his causes a reduction in sprocket wear as the motion between the chain and sprocket tooth is reduced. he wear is reduced by restricting the joint articulation to the pinbarrel, which is best able to withstand this type of wear. hould conveyor troughs be flared and what are the benefits? onveyor troughs should be flared so that the chain will enter and exit the conveyor smoothly. his will avoid the chain wearing unevenly and/or getting jammed on any part of the entry or exit of the conveyor. hat are the advantages of full face sprockets vs. A plates? Advantage of full face sprockets over A style is that they support the chain and its attachments over a greater surface area of the barrel. his ensures that the stress of the load is not concentrated in a smaller area of the chain and can help reduce fatiguetype failures on the barrels. an subaki chain be joined with another manufacturer s chain? subaki chain is interchangeable with other manufacturers of. It is best to use the same manufacturer s rivet and corresponding sidebars for assurance of a premium fit. ow can I speed up and facilitate chain assembly and disassembly? subaki of anada manufactures a specifically designed tool, the, for easy assembly and disassembly while in the field. ee page for details. hen my chain starts stretching and needs changing, what else should I check? Upon changing the chain it is best to change the sprocket at the same time to ensure that all components wear evenly. utting a new chain on used sprockets, even if they look to be in fair condition, can have adverse effects on the new chain s lifespan. hile the chain is off of the conveyor, it is recommended to check all points of the infrastructure, troughs, beds, sprocket teeth/alignment and takeup systems to ensure all parts are in good working order. hat is the maximum recommended elongation for mill/drag chains? % % elongation is where the chain should be replaced. Of course, elaborate takeup systems can be adjusted to ensure a chain can be run even longer but wear of individual components such as the pin and barrel will surpass an acceptable wear limit and the chain s load ratings will be compromised. In addition, if the chain is sliding in a trough and the sidebar height is reduced by % or more, the chain should be replaced. hat is the recommended clearance between trough and wing attachments? It is best to have no more than a ½" clearance between the inside trough edge and the outer edge of a chain. his includes any attachment that has been welded to the chain. nsure that the chain and trough are aligned and that the chain does not move from side to side under normal operating conditions.

hen excellence really matters No Impact. Just easy steps with. ower ylinder ead tock ail tock elow are the basic steps for using the subaki. omplete instructions are included with the tool.

Grooved ost tart with the ool aligned so that the posts are in the vertical position with one post directly over top of the other post.

hen you have to assemble and disassemble engineering class chain in a mission critical environment, time is of the essence. You want to get back into operation without delay.

hat s why we have developed a patented tool. A portable tool designed to get that tough job done fast, precise, safe and without damaging your valuable chain, thereby jeopardizing the application.

ample of chain sizes that are suitable are as follows: Mill hain: 8,,, 0, 0, rag hain: 0, 0, 0,,, 80 tandard: isassembly/assembly a) o disassemble, grind off peened end of the chain pin.

It is not critical that the chain be tight to the head and tail stocks as the piston rod will move out to meet the chain. /"" space is recommended. o continue disassembly, go to tep.

25 hen excellence really matters No Impact. Just easy steps with. ower ylinder ead tock ail tock elow are the basic steps for using the subaki. omplete instructions are included with the tool. iston Rod iston Rod must be fully retracted and behind the head stock position, as shown. Grooved ost tart with the ool aligned so that the posts are in the vertical position with one post directly over top of the other post. Rotate the entire tool until the top and bottom posts contact the chain at the top and bottom as shown below. subaki has a better way to assemble and disassemble your valuable chain. hen you have to assemble and disassemble engineering class chain in a mission critical environment, time is of the essence. You want to get back into operation without delay. ut why risk damage to chain or personal injury by attacking the job with a blunt instrument? Nobody knows more about chain than subaki and that includes service and maintenance, of course. hat s why we have developed a patented tool. A portable tool designed to get that tough job done fast, precise, safe and without damaging your valuable chain, thereby jeopardizing the application. ut your hammer down and reach for the subaki tool the next time you need to assemble or disassemble chain. hat job has just become a lot easier and safer. ample of chain sizes that are suitable are as follows: Mill hain: 8,,, 0, 0, rag hain: 0, 0, 0,,, 80 tandard: isassembly/assembly a) o disassemble, grind off peened end of the chain pin. Open the tail end stock and adjust along the posts as needed to the appropriate position for the chain that you wish to disassemble. It is not critical that the chain be tight to the head and tail stocks as the piston rod will move out to meet the chain. /"" space is recommended. o continue disassembly, go to tep. b) o assemble, loosely install the pin into the chain, open the tail stock and adjust along the posts to the appropriate position for the chain that you wish to assemble. It is not critical that the chain be tight to the head and tail stocks as the piston rod will move out to meet the pin. o continue assembly go to tep. Open tail stock and adjust to the chain width nsure that there is enough room to adjust the chain pin position as needed isassembly/assembly a) o disassemble, continue applying pressure until the pin breaks the press fit on the chain. You will hear pop or breaking sounds when this happens. nsure that the pin has broken the press fit completely. o continue disassembling chain, go to step. b) o assemble, continue to apply pressure until pin seats completely into the chain. here should be no gap between pin head and link plate. o continue assembling go to tep. Release the hydraulic pressure, returning the piston rod to the relaxed position. Open the tail stock and remove the chain.

ROK hen quality really matters subaki recision Manufacturing Assembly eamless excellence from

hese are the concepts we live: antotsu, a better than best mentality to produce the utmost in

, workplace management to improve safety, increase worker efficiency, and to achieve a sense of

oncept & esign Raw Materials Maximize material suitability In rocess recision & Accuracy inal

tyle including plit aper, Q and aper ock, Keyless ocking evice/ower ock, pline, Idler including

Material arbon, tainless, Alloy, Quench & empered (Q), lastic.

Value Added Options Mud Relief, ear Indicator, Adjustable, ncoder mounting holes, encoder

onstruction Options plit egmental Rim ear Indicators procket wear is one of the leading causes

hen you can t waste valuable machine time inspecting sprockets, trust subaki wear indicators to

atent information: anada 90, UA 08 iming ulley Options Aluminum, teel, tainless olyhain G M*,,

apacities & Machining entres ocal manufacturing means rapid turnaround of your unique products

Raw material sourcing ocal daily delivery of plate and bar orged ring urning Milling utting

& Quenching inishing aint/owder oat/oxide/late/vibrainish esign esign from sample esign tudies

design Modeling (olidorks) software. an be integrated into your assembly drawing.

26 ROK hen quality really matters subaki recision Manufacturing Assembly eamless excellence from concept to market. argest sprocket manufacturing facility in anada. hese are the concepts we live: antotsu, a better than best mentality to produce the utmost in quality. Kaizen, a total company involvement focusing on continuous workplace improvement., workplace management to improve safety, increase worker efficiency, and to achieve a sense of pride and ownership. IO, registered. oncept & esign Raw Materials Maximize material suitability In rocess recision & Accuracy inal omponent Quality & Reliability inal roduct procket Options ore Options lain, inished, ushing tyle including plit aper, Q and aper ock, Keyless ocking evice/ower ock, pline, Idler including bronze, bearing, plastic, hex bore, square bore. Material arbon, tainless, Alloy, Quench & empered (Q), lastic. tyles Roller hain & ngineered lass. Value Added Options Mud Relief, ear Indicator, Adjustable, ncoder mounting holes, encoder flags, Integrate separate components (sprocketclutch), lubrication holes and grooves. onstruction Options plit egmental Rim ear Indicators procket wear is one of the leading causes of premature chain failure. hen you can t waste valuable machine time inspecting sprockets, trust subaki wear indicators to remove the guesswork. atent information: anada 90, UA 08 iming ulley Options Aluminum, teel, tainless olyhain G M*,, rapezoid Zinc lating, rass ulley *olyhain G M is a trademark of the Gates orporation. apacities & Machining entres ocal manufacturing means rapid turnaround of your unique products and requirements. Raw material sourcing ocal daily delivery of plate and bar orged ring urning Milling utting Machining obber Gasher lame ut lotting & roaching pline Keyway eat reat Induction lame empering & Quenching inishing aint/owder oat/oxide/late/vibrainish esign esign from sample esign tudies Mechanical property testing rototype development Understands your need for unique and custom design Modeling (olidorks) software. an be integrated into your assembly drawing. Reliability he assurance that your unique designs will be manufactured to order. ngineering upport Improvement to current design Optimization of material selection Value added additions Review of geometry and profile to suit application requirement ngineering report using rd party analysis Reverse ngineering Inventory upport subaki will stock to suit your blanket order requirements. raw inventory as your product requires eace of mind security: assurance that your inventory will be available when you need it ap into subaki s global supply chain network and resources. 8 9

27 No. 80 inished ore " itch No. 80 Multiple trand " itch hen experience really matters No. atalogue eeth tyle procket iameters " itch Outside itch aliper ia. ia. ia ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₈ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ tock finished bores (including keyway and set screws) ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ³ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ub diameters may vary to suit bore sizes. All finished bore sprockets are manufactured with keyway centerline of tooth. Indicates set screw at 90 and 80 from keyway. ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ OUI IAMR OR OUI IAMR OR OO (NOMINA) Y Y U IAMR OO (NOMINA) Y Y U IAMR imensional ata ingle trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nominal ooth idth 0." If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). procket iameters " itch No. Outside itch aliper tock eeth ia. ia. ia. ore ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ imensions shown allow for standard keyway with set screw at 90. here is a recessed groove in the hub to allow for chain clearance. * ub diameter may vary to suit bore size. imensional ata ouble trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nominal ooth idth 0." late hickness.0" riple trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nominal ooth idth 0." late hickness.8" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). 80 ouble trand (ype and ) atalogue Max *ub eight ype tyle ore iameter ouble trand riple trand ³ ₈ ⁹ ₁₆ ¹³ ₁₆ ¹ ₄ ¹ ₂ ³ ₄ ⁷ ₈ ¹ ₈ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ OUI IAMR OR OUI IAMR OR ⁹ ₁₆ ³ ₈ ¹¹ ₁₆ ¹ ₃₂ ⁵ ₁₆ ⁵ ₈ ⁵ ₁₆ ⁵ ₈ ¹⁵ ₁₆ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ Y Y Y Y ³ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ¹ ₈ ¹ ₈ ³ ₄ ³ ₄ A IKN OO (NOMINA) U IAMR OUI IAMR OR A IKN OO (NOMINA) U IAMR OUI IAMR OR 80 riple trand (ype and ) atalogue Max *ub eight ype tyle ore iameter Y Y A IKN OO (NOMINA) Y Y A IKN OO (NOMINA) U IAMR U IAMR OUI IAMR OR ⁹ ₁₆ ¹³ ₁₆ ¹ ₄ ¹ ₂ ³ ₄ ⁷ ₈ ¹ ₈ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ³ ₄ ³ ₄ ³ ₄ OUI IAMR OR ³ ₈ ¹¹ ₁₆ ¹ ₃₂ ⁵ ₁₆ ⁵ ₈ ⁵ ₁₆ ⁵ ₈ ¹⁵ ₁₆ ¹ ₂ ¹ ₂ ¹ ₂ Y Y Y Y ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ A IKN OO (NOMINA) U IAMR A IKN OO (NOMINA) U IAMR

28 No. 80 Q tyle " itch No. 80 ingle plit aper " itch hen experience really matters procket iameters ype " itch No. of Outside itch aliper atalogue Max. ub eight eeth iameter iameter iameter ype tyle ushing ore iameter Y Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. ushing K Q tyle ushings ore Range (inches) tandard Keyway ¹ ₂ ¹ ₂ ¹ ₂ ⁵ ₈ ¹ ₂ ¹⁵ ₁₆ ⁷ ₈ ¹ ₂ imensional ata ingle trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nominal ooth idth 0." hallow Keyway ¹⁵ ₁₆ ¹¹ ₁₆ ¹⁵ ₁₆ ³ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ithout Keyway ¹¹ ₁₆ ⁹ ₁₆ ⁵ ₈ ¹³ ₁₆ ¹⁵ ₁₆ K 80K 80K 80K8 80K eight If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). OUI IAMR U IAMR K K K K K Y Y Y ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹⁵ ₁₆ OO (NOMINA) ¹¹ ₁₆ ³ ₄ ³ ₁₆ ³ ₈ ⁷ ₈ ¹ ₈ ³ ₈ ³ ₈ ³ ₈ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ OUI IAMR U IAMR ¹³ ₁₆ ¹³ ₁₆ ³ ₄ ³ ₄ ¹ ₂ Y Y Y ³ ₈ ³ ₈ ¹ ₁₆ ¹ ₁₆ ¹ ₁₆ ¹ ₁₆ ¹ ₁₆ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ OO (NOMINA) ³ ₈ ³ ₈ ¹ ₁₆ ¹ ₁₆ ¹ ₁₆ ¹ ₁₆ ¹ ₁₆ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ OUI IAMR U IAMR ¹⁹ ₃₂ ¹⁹ ₃₂ ⁴³ ₆₄ ⁴³ ₆₄ ¹⁵ ₆₄ ¹⁵ ₆₄ ¹⁵ ₆₄ ¹⁵ ₆₄ ¹⁵ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ²³ ₆₄ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ Y ¹¹ ₁₆ ¹¹ ₁₆ ³ ₁₆ ³ ₁₆ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁷ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ Y Y OO (NOMINA procket iameters ype " itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter tyle ub () O M (Ibs.) Q Q 80Q 80Q 80Q 80Q 80Q 80Q8 80Q9 80Q0 80Q 80Q 80Q onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. imensional ata ingle trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nom. ooth idth 0." If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum) / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Y Y / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 /8 /8 / /8 / /8 / /8 / /8 / /8 / / / / / / / / / / / / / / / Y Y / / / / / /8 /8 /8 /8 / / / / / / / / / / / / / / / /

29 No. 80 ingle plit aper " itch No. 80 ouble plit aper " itch hen experience really matters procket iameters ype " itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter tyle ub () O M (Ibs.) imensional ata ingle trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nom. ooth idth 0." Q 80Q 80Q 80R 80Q 80Q8 80R9 80Q0 80R Q 80R 80R 80Q 80R 80R 80Q8 80R8 80R0 80Q 80R 80R 80Q0 80R0 80Q0 80R0 80Q 80R 80R80 80R8 80R9 80 onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. / / / / / / / / / / / / / / / / / /8 / / /8 / /8 /8 / /8 /8 / /8 /8 / /8 /8 / /8 /8 / /8 / /8 / /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / procket iameters ype A, and " itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter ype tyle ub () O M (Ibs.) R R 80R 80R 80R 80R 80R 80R8 80R0 80R 80R 80R 80R8 80R 80R 80R0 80R8 80R 80U 80U9 A A A A A Q Q R R R R R R U0 U0. / / / / / / / / / / / / / / / /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 / / 9 / /8 / / / / / / / / / / / / / / / / / / / / / / / / / / /8 / / / / / / / / / / / / / / / / / / / /8 /8 /8 /8 /8 /8 / / / / 9 / 9 / 9 / 9 / 9 / 9 / / / / /8 / / / / / / / / / / / / / / / / / / / 8 / 8 / onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. imensional ata ouble trand hain 80 ize 80 itch.000" hain Inside idth 0." Roller iameter 0." Nominal ooth idth 0." late hickness.0" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Y Y A Y Y Y Y Y Y Y Y Y Y

30 No. 00 inished ore /" itch No. 00 Multiple trand /" itch hen experience really matters No. of atalogue eeth tyle imensional ata ingle trand hain 00 ize 00 itch.0" hain Inside idth 0.0" Roller iameter 0.0" Nominal ooth idth 0.9" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. procket iameters itch Outside itch aliper iameter iameter iameter OUI IAMR OR ub diameters may vary to suit bore sizes. All finished bore sprockets are manufactured with keyway centerline of tooth. OO (NOMINA) U IAMR ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ (including keyway and set screws) ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ OUI IAMR OR tock finished bores OO (NOMINA) U IAMR ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ procket iameters " itch No. Outside itch aliper tock eeth ia. ia. ia. ore imensional ata ouble trand hain 00 ize 00 itch.0" hain Inside idth 0.0" Roller iameter 0.0" Nominal ooth idth 0.9" late hickness.0" riple trand hain 00 ize 00 itch.0" hain Inside idth 0.0" Roller iameter 0.0" Nominal ooth idth 0.9" late hickness.8" ¹ ₈ ¹ ₈ ¹ ₈ imensions shown allow for standard keyway with set screw at 90. * ub diameter may vary to suit bore size. 00 ouble trand (ype and ) atalogue Max *ub eight ype tyle ore iameter ouble trand ¹ ₂ ³ ₄ ¹ ₈ ¹ ₄ ¹ ₂ ³ ₄ ¹ ₈ ⁵ ₁₆ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ OUI IAMR OR ⁵ ₁₆ ¹¹ ₁₆ ¹ ₈ ³ ₈ ³ ₄ ³ ₁₆ ⁹ ₁₆ ¹ ₄ ¹ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ Y Y ⁷ ₈. ⁷ ₈.0 ⁷ ₈.8 ⁷ ₈ 9. ⁷ ₈. ⁷ ₈. ¹ ₈.8 ¹ ₈ 9. ¹ ₈. ¹ ₈.8 ¹ ₈ 9. ³ ₈.0 ³ ₈.8 ³ ₈. ³ ₈ 0. ³ ₈. ³ ₈. ³ ₈ 0. ³ ₈. ¹ ₂ 88.0 ¹ ₂ 90.8 ¹ ₂ A IKN OO (NOMINA) U IAMR OUI IAMR OR 00 riple trand (ype and ) atalogue Max *ub eight ype tyle ore iameter Y Y U IAMR A IKN OO (NOMINA) OUI IAMR OR ¹ ₈ ¹ ₄ ¹ ₂ ³ ₄ ¹ ₈ ⁵ ₁₆ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ Y Y ¹ ₈ ³ ₈ ³ ₄ ³ ₁₆ ⁹ ₁₆ ¹ ₄ ¹ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ U IAMR ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ A IKN OO (NOMINA) Y Y Y Y If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. A IKN OO (NOMINA) A IKN OO (NOMINA) A IKN OO (NOMINA) riple trand OUI IAMR OR U IAMR OUI IAMR OR U IAMR OUI IAMR OR U IAMR Y Y Y Y Y Y

31 No. 00 Q tyle /" itch No. 00 ingle plit aper /" itch hen experience really matters procket iameters ype, and " itch No. of Outside itch aliper atalogue Max. ub eight eeth iameter iameter iameter ype tyle ushing ore iameter Y K 00K K K ⁵ ₈ ⁵ ₈ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ³ ₁₆ ¹ ₂ ¹⁵ ₁₆ ¹ ₄ ⁵ ₈ ¹⁵ ₁₆ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. ushing K Q tyle ushings ore Range (inches) tandard Keyway ¹ ₂ ¹ ₂ ⁵ ₈ ¹ ₂ ¹⁵ ₁₆ ⁷ ₈ ¹ ₂ imensional ata ingle trand hain 00 ize 00 itch.0" hain Inside idth 0.0" Roller iameter 0.0" Nominal ooth idth 0.9" hallow Keyway ¹¹ ₁₆ ¹⁵ ₁₆ ³ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets ithout Keyway ⁹ ₁₆ ⁵ ₈ ³ ₁₆ ¹⁵ ₁₆ eight OUI IAMR U IAMR Y Y Y OO (NOMINA) OUI IAMR Y Y Y ³ ₄ ³ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ OO (NOMINA) U IAMR ¹ ₁₆ ¹ ₁₆ ¹ ₈ ¹ ₈ ¹ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₁₆ ¹ ₁₆ ¹ ₈ ¹ ₈ ¹ ₈ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ OUI IAMR U IAMR ⁹ ₁₆ ⁹ ₁₆ ⁹ ₆₄ ⁹ ₆₄ ¹⁵ ₆₄ ¹⁵ ₆₄ ¹⁵ ₆₄ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ¹³ ₁₆ ⁷ ₈ ⁷ ₈ Y Y Y ³ ₁₆ ³ ₁₆ ⁷ ₈ ⁷ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ OO (NOMINA) procket iameters ype " itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter tyle ub () O M (Ibs.) imensional ata ingle trand hain 00 ize 00 itch.0" hain Inside idth 0.0" Roller iameter 0.0" Nominal ooth idth 0.9" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets Q Q 00Q 00Q 00R 00Q 00R 00Q 00R 00Q 00R 00Q8 00R8 00Q0 00R0 00Q 00R 00R 00R0 00R 00R 00R8 00R 00R0 00R0 00R 00R80 00R8 onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 / / / /8 / /8 / /8 / /8 / /8 / /8 / /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 /8 /8 /8 /8 /8 Y Y Y Y / / / / / / / / /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

32 No. 00 ouble plit aper /" itch No. 0 Q tyle /" itch hen experience really matters procket iameters ype and /" itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter ype tyle ub () O M (Ibs.) R R 00R 00R A A A A A A A A A A A A 8 8 Q Q.0 / / / / / / / / / / / / /8 /8 /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / /8 /8 /8 / / / / / /8 /8 /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. imensional ata ouble trand hain 00 ize 00 itch.0" hain Inside idth 0.0" Roller iameter 0.0" Nominal ooth idth 0.9" late hickness.0" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). Y 8 Y Y Y Y Y A Y Y No. of Outside itch aliper atalogue Max. ub eight eeth iameter iameter iameter ype tyle ushing ore iameter Y J0 0J0 0J80 Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. ushing J procket iameters ¹ ₂" itch Q tyle ushings ore Range (inches) tandard Keyway ¹ ₂ ¹⁵ ₁₆ ⁷ ₈ ¹ ₂ ¹ ₂ ¹ ₂ imensional ata ingle trand hain 0 ize 0 itch.00" hain Inside idth.000" Roller iameter 0.8" Nominal ooth idth 0.9" hallow Keyway ⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ⁷ ₈ ⁹ ₁₆ ithout Keyway ¹³ ₁₆ ¹⁵ ₁₆ eight OUI IAMR U IAMR Y J J J OO (NOMINA) ype, and ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ OUI IAMR ³ ₈ ⁵ ₈ ¹ ₈ ¹ ₈ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ Y ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₁₆ ³ ₁₆ ³ ₁₆ OO (NOMINA) U IAMR ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ OUI IAMR U IAMR ¹ ₆₄ ¹ ₆₄ ¹ ₆₄ ¹ ₆₄ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ Y ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₄ ¹ ₄ ¹ ₄ OO (NOMINA) Y Y Y Y Y Y 0

33 No. 0 ingle plit aper /" itch No. 0 ouble plit aper /" itch hen experience really matters procket iameters ype and /" itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter ype tyle ub () O M (Ibs.) R0 0 0R 0R 0R 0R 0R 0R8 0R0 0R 0R 0R 0R R R0 00 0R0 00 0R R R R R R R R / / / / / / / / / / / / / / / / / / / / / / /8 / /8 / /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 / /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 / /8 9 / 9 / 9 / 9 / 9 / 9 / / 9 / / 9 / / / / / / / / / /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. No. of eeth procket iameters Outside iameter itch iameter A / /8 / / A / /8 / / A / /8 / / A / /8 / / R A / /8 / / / /8 / /.8 /8 / R A / /8 / / R A / /8 / / R A / /8 / / R A / /8 / / / /8 / /.8 /8 / R8 A / /8 / / / /8 / /.8 /8 / / /8 / /.8 /8 / / / /8 /.8 / / U0 0U0 U0 / / / 9/.8 9/ 8 / 8 onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. imensional ata ouble trand hain 0 ize 0 itch.00" hain Inside idth.000" Roller iameter 0.8" Nominal ooth idth 0.89" late hickness.8" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. aliper iameter atalogue ype tyle ub ype and ushing () O M eight imensional ata ingle trand hain 0 ize 0 itch.00" hain Inside idth.000" Roller iameter 0.8" Nominal ooth idth 0.9" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Y Y Y 8 Y prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). Y Y Y Y Y Y

34 No. 0 Q tyle /" itch No. 0 plit aper /" itch hen experience really matters procket iameters ype,, and ³ ₄" itch No. of Outside itch aliper atalogue Max. ub eight eeth iameter iameter iameter ype tyle ushing ore iameter Y J0 0J 0J8 0J 0J0 0M0 0M80 J J J J J M M ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ¹ ₂ ¹ ₂ ⁷ ₁₆ ⁷ ₈ ¹ ₈ ¹ ₈ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₁₆ ³ ₁₆ ³ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ³ ₄ ³ ₄ ¹ ₆₄ ¹ ₆₄ ¹ ₆₄ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ²⁹ ₃₂ ²⁹ ₃₂ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. ushing J M Q tyle ushings ore Range (inches) tandard Keyway ¹ ₂ ¹⁵ ₁₆ ⁷ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ imensional ata ingle trand hain 0 ize 0 itch.0" hain Inside idth.000" Roller iameter.000" Nominal ooth idth 0.9" hallow Keyway ⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ⁷ ₈ ⁹ ₁₆ ³ ₄ ¹ ₂ ithout Keyway ¹³ ₁₆ ¹⁵ ₁₆ eight OUI IAMR U IAMR Y OO (NOMINA) OUI IAMR Y OO (NOMINA) U IAMR OUI IAMR U IAMR Y OO (NOMINA) OUI IAMR Y OO (NOMINA) U IAMR procket iameters ype and /" itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter ype tyle ub () O M (Ibs.) / / / / / / 9 / 9 / /8 / R0 0 0R 0R 0R 0R 0R 0R0 0R 0R 0 0R R R R R / / / / / / / / /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 8 / 8 / 8 / 8 / 8 / 8 / 8 / 8 / / 8 / / / / / / / / / / / / /8 /8 /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. imensional ata ingle trand hain 0 ize 0 itch.0" hain Inside idth.000" Roller iameter.000" Nominal ooth idth 0.9" If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Y Y Y Y Y Y Y Y Y Y Y Y Y Y

35 No. 0 Q tyle " itch No. 0 plit aper " itch hen experience really matters No. Outside itch aliper atalogue Max. ub eight eeth iameter iameter iameter ype tyle ushing ore iameter Y J 0J8 0J0 0J 0M0 0M 0M 0M0 0M0 0M80 Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. ushing J M procket iameters " itch Q tyle ushings ore Range (inches) tandard Keyway ⁷ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ imensional ata ingle trand hain 0 ize 0 itch.000" hain Inside idth.0" Roller iameter." Nominal ooth idth." hallow Keyway ¹⁵ ₁₆ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ⁷ ₈ ⁹ ₁₆ ³ ₄ ¹ ₂ ithout Keyway OUI IAMR Y eight OO (NOMINA) U IAMR OUI IAMR J J J J M M M M M M Y ¹ ₂ ¹ ₂ ¹ ₂ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ OO (NOMINA) ype, and U IAMR ¹¹ ₁₆ ¹ ₄ ¹ ₄ OUI IAMR U IAMR ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ Y ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ OO (NOMINA) ¹⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ³ ₄ OUI IAMR ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ³ ₁₆ ¹⁹₃₂ ¹⁹₃₂ ¹⁹₃₂ ¹⁹₃₂ ¹⁹₃₂₆ ¹⁹₃₂ Y ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ⁵ ₈ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ OO (NOMINA) U IAMR procket iameters ype and " itch No. of Outside itch aliper atalogue ushing eight eeth iameter iameter iameter ype tyle ub () O M (Ibs.) imensional ata ingle trand hain 0 ize 0 itch.000" hain Inside idth.0" Roller iameter." Nominal ooth idth." If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets R0 0 0R 0R 0R 0R 0R 0 0R8 08 0R U0 0U0 0U80 R R R R R R R R R U0 U0 U / / / / / / / / / / /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 /8 / /8 / /8 / / / / / / / / / / / / / / / / / / / / / / /8 / /8 / /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / / / Y Y Y Y /8 /8 9 / 9 / /8 8 / onstruction may not be exactly as shown. olid or welded construction for sprockets may be substituted. Minor envelope variations may occur. Other bushing sizes and mounting directions available. pecify bushing size and mounting direction (hub or plate side) when ordering. prockets with catalogue numbers that begin with have hardened teeth (Rockwell minimum). / / /8 /8 /8 /8 /8 /8 / / / / / / / / / / / / / / / / / / / / / / / / / / 8 / 8 / Y Y Y Y Y Y Y Y

9 9.. 8A 0 8 9 8.9 0.08.0 8A 8 8. 0.90.0 8A 8 8...0 8A 8 8...0 8A 8 8...0 8A 9 8 8..0 8.0 8A8 88 88 90.9.0 9.0 8A9 9 89 89 9.9.8 0.0 8A0 80 8 80 0.9.8.0 8A 0 8 8 8 0.9..0 8A 8 89 8.9 8..0 8A 8 9 8 8.

36 MI AIN ROK hen toughness really matters 8/R8 8/R8.09" itch / 0.80" arrel iameter / *" late hickness ype A ype ype ype and of eeth tock ore atalogue eight atalogue eight atalogue eight ore itch iameter A A A A A A A A A A A A A A A A A A A A A A A A A */8 plate thickness is available upon request. lease specify plate thickness when placing order.." itch / " arrel iameter / " late hickness ype A ype ype ype and of eeth tock ore atalogue eight atalogue eight atalogue eight ore itch iameter A A A A A A A A A A " itch / 0.90" arrel iameter / 0.8" late hickness ype A ype ype ype and of eeth tock ore atalogue eight atalogue eight atalogue eight ore itch iameter A A A A A A A A A A A A A A A A A A A A A A A A A ub inished bore range.09 pitch ub O.. ub length style style style style Major Minor a b c d e or style solid hubs ()N0././ ()N0././ ()N0././ or style split hubs ()N././ ()N././ ()N././ ()N./ Y Y If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. 8 9

37 MI AIN ROK hen toughness really matters 8/R8.0" itch / " arrel iameter /." late hickness 8/R8.0" itch /.0" arrel iameter /." late hickness of eeth tock ore atalogue ype A ype ype ype and eight atalogue eight atalogue eight ore 8. 8A A A A A A A A A A A A A A A A A A A A A A A itch iameter of eeth 8 tock ore atalogue ype A ype ype ype and eight atalogue eight atalogue.0" itch / " arrel iameter /." late hickness eight ore 8. 8A A A A A A A A A A A A A A A A A of eeth tock ore atalogue itch iameter ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 8A A A A A A A A A A itch iameter If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. 0

38 MI AIN ROK hen toughness really matters / " itch /." arrel iameter /.0" late hickness /.0" itch /." arrel iameter /.0" late hickness of eeth tock ore atalogue ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 A A A A A A A A A A A A A A A A A A A A itch iameter of eeth tock ore atalogue ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 A A A A A A A A A A A A A A A A A A A A itch iameter If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings.

39 MI AIN ROK hen toughness really matters.0" itch /." arrel iameter /." late hickness 0/0 " itch /." arrel iameter /.0" late hickness of eeth tock ore atalogue ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 A A A A A A A A A A A A A A A A...0 A A A itch iameter of eeth tock ore atalogue 0/0 ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 0A A A A A A A A A A A A A A A A of eeth tock ore atalogue.00" itch /." arrel iameter /.0" late hickness ype A ype ype ype and eight atalogue eight atalogue itch iameter eight ore 8.0 0A A A A A A A A A A itch iameter If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings.

40 MI AIN ROK hen toughness really matters / of eeth tock ore.00" itch /." arrel iameter /." late hickness atalogue ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 A A A A A A A A A itch iameter of eeth.00" itch /." arrel iameter /." late hickness tock ore atalogue ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 A A A A A A A A A itch iameter / of eeth tock ore atalogue.00" itch /." arrel iameter /." late hickness ype A ype ype ype and eight atalogue eight atalogue eight ore 8.0 A A A A A A A A A itch iameter lbs. ightening holes available on request for most sprockets. lbs. ightening holes available on request for most sprockets. If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings. If the sprocket needed is not listed above, please contact subaki for madetoorder custom sprockets. Mill chain sprockets can be supplied with A, or idlers with or urethane bushings (split or solid construction) and or bearings.

RAG AIN ROK I & IR ROK hen efficiency really matters I ROK OUI IAMR U O.. U NG procket itch ooth ace No. of eeth atalogue ore itch iameter 0.

000 8.0 8.000 8.0 80 8.000.000 0..00 8 08.9.8 9 09.9. 0 00.9 9. 0.9.0.9 8. 8 8.9 0.90 9 9.9.9. 8. 8 8.9 0.90 9 9.9.9 8. 8. 8 88.9 0.90 9 89.9.9 0.9.00 8 08.9.8 0.9.0..00. 8. 9 9.9.9 80.

jamups. ast and simple rim replacement when rim is worn out.

IR ROK ub Available inished ore izes subaki offers a variety of different types of idler sprockets to fit a variety of applications, including

41 RAG AIN ROK I & IR ROK hen efficiency really matters I ROK OUI IAMR U O.. U NG procket itch ooth ace No. of eeth atalogue ore itch iameter and I AJUA ROK ast and accurate sprocket tooth/chain roller positioning at installation, or when a chain is forced off the sprockets due to jamups. ast and simple rim replacement when rim is worn out. plit hub adjustable sprockets are ideal for applications with long shafts running or more strands of chain. IR ROK ub Available inished ore izes subaki offers a variety of different types of idler sprockets to fit a variety of applications, including the following standard types: all earing Idlers Needle earing Idlers NonMetallic Idlers (Nylon/Nyloil, elrin, Urethane and other bushed idlers using custom materials) ronze ush Under " uses self lube bronze bushing materials Over " uses grease port drilled in hub to spiral bronze bush ub Outside iameter ub eight olts /, /, /, / / /8 x /, / / /8 / x / / 9 / x / 8 hart shows finished bores only. ubs can also be supplied with urethane and bronze bushings. 8 9

42 plit aper ushings hen compatibility really matters,, Q & R ushings ushings AM (ANI) plit aper ushings ub U arge mall nd nd G / /.0.0 / /.0.00 / / /.9.8 / / /.9.90 / / /.0. / / /.80. Q / / /.80.0 /8 /8 / R /8 /8 / /8 / / / /.0.9 U0 / / / U0 / / / U /8 / / U 0 /8 / 9 / / / / / / 9 / imensions ore Range ap crews V R ype ype No. ize / / /8 /8 /8 /8 /8 /8 8 /8 8 /8 8 /8 8 /8 / / 9 / / / /8 /8 /8 /8 /8 /8 /8 0 0 /8 /8 / / / / / / / / / / / / / /8 /8 / / / / / / / / / /8 /8 /8 9 /8 /8 /8 / /8 /8 /8 / / / / / / / / / / / / / / / /8 / / /8 / / / / / /8 / / /8 / / / / / /8 / / / / / /8 / / /8 / / / / / / / / /8 / /8 /8 /8 / /8 /8 / / / / /8 / /8 / /8 / / / / / x /8 / x / / x / x / x / /8 x / /8 x / /8 x / /8 x / / x / / / /8 x / /8 x / /8 x / /8 x / / x / x eight (Ibs.) rench orque in. Ibs U ushings ushings Metric plit aper ushings ore Range Keyway (mm) ub No. x x x x x x x 8 x 8 x 8 x 8 x 0 x 8 0 x 8 0 x 8 0 x 8 G R Note denotes that the plit aper ushing is also available with metric bore size/keyway. All metric bores are supplied with imperial threads. All bushings can be supplied in steel, stainless steel and other materials. onsult subaki for more details. Metric plit aper ushings Note denotes that the plit aper ushing is also available with metric bore size/keyway. All metric bores are supplied with imperial threads. All bushings can be supplied in steel, stainless steel and other materials. onsult subaki for more details. ore Range Keyway ub No. (mm) x 8 x 8 x 8 x 9 x 9 x 9 x 0 8 x 8 x 0 x 0 x x x x x G R 80 8

plit aper ubs Q tyle ushing hen compatibility really matters subaki offers a complete line of plit aper style weldon hubs for insertion and welding to produce style sprockets, sheaves and other

43 plit aper ubs Q tyle ushing hen compatibility really matters subaki offers a complete line of plit aper style weldon hubs for insertion and welding to produce style sprockets, sheaves and other applications without hub protrusion. o provide greater strength for this type of shaft locking mechanism and reduce heat distortion caused by welding, these hubs are dimensionally the same as our sprocket items. pecial dimension hubs are available on a MadetoOrder basis. All subaki hubs are made from steel bar stock (not powdered or sintered metal). he plit aper style weldon hubs listed below include appropriate tapered bores and mounting holes. G apped oles ub ushing eight O.. A K V a( o ) d No. ize G Q R U0 U U G Q R U0 U U φ (olt ircle) ¹ ₂ ⁷ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ 8 ¹ ₂ 8 ¹ ₂ 8 ¹ ₂ ¹ ₂ /" aper per oot on iameter ³ ₃₂ ³ ₃₂ ⁷ ₁₆ ⁷ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ³ ₁₆ ³ ₁₆ ⁹ ₁₆ ⁹ ₁₆ ¹ ₄ ¹ ₄ ¹ ₄ ⁹ ₁₆ A ⁹ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ¹ ₈ ¹ ₈ ³ ₈ ³ ₈ ⁵ ₈ ⁵ ₈ ³ ₈ ³ ₈ 0 ³ ₈ ³ ₈ ¹ ₂ ¹ ₂ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ³ ₄ ³ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ⁵ ₈ ⁷ ₈ ⁵ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ³ ₄ ³ ₄ ³ ₄ ⁵ ₁₆ ¹¹ ₁₆ ³ ₄ ⁵ ₈ 8 ⁵ ₈ ³ ₈ ¹ ₂ ⁵ ₈ ⁷ ₈ ⁵ ₈ ⁵ ₈ ¹³ ₁₆ ¹³ ₁₆ ⁷ ₈ ⁷ ₈ ¹ ₈ ¹ ₈ ⁵ ₈ ⁵ ₈ ³ ₄ ³ ₄ ³ ₄ ¹ ₄ 0 ¹ ₄ 0 ⁵ ₁₆ 8 ⁵ ₁₆ 8 ⁵ ₁₆ 8 ⁵ ₁₆ 8 ³ ₈ ³ ₈ ³ ₈ ³ ₈ ¹ ₂ ¹ ₂ ⁵ ₈ ⁵ ₈ ⁵ ₈ ³ ₄ UING JA O J AM (ANI) Q tyle ushings UING M O N ] olt ap crews tandard hallow ithout eight ushing A G ircle Required Keyway Keyway Keyway JA K J M N ⁵ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ⁹ ₁₆ ⁵ ₈ ⁷ ₈ ¹ ₈ ¹ ₂ ³ ₈ ⁷ ₈ ³ ₁₆ ³ ₁₆ ¹³ ₁₆ ¹ ₈ ⁵³ ₆₄ ⁷ ₁₆ ⁹ ₆₄ ¹ ₂ ⁵ ₈ ³ ₁₆ ³ ₁₆ ⁷ ₈ ⁵ ₈ ⁵ ₈ ¹ ₄ 9 0 ⁹ ₁₆ ³ ₄ ³ ₄ ¹ ₂ ³ ₁₆ ³ ₁₆ ¹ ₄ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ⁷ ₃₂ ⁷ ₃₂ ¹ ₄ ¹¹ ₃₂ ³ ₈ ¹³ ₃₂ ⁹ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ¹³ ₁₆ ¹⁵ ₁₆ ¹ ₁₆ ³ ₄ ³ ₄ ⁵ ₈ ³ ₄ 8¹ ₈ ²¹ ₃₂ ¹ ₄ ¹¹ ₁₆ ¹¹ ₁₆ ⁵ ₁₆ ⁷ ₈ ⁵ ₈ ¹ ₄ ⁷ ₈ 8¹ ₂ () #0 x () ¹ ₄ x ³ ₈ () ¹ ₄ x ³ ₈ () ¹ ₄ x ⁷ ₈ () ⁵ ₁₆ x () ³ ₈ x () ¹ ₂ x ³ ₄ () ⁹ ₁₆ x ⁵ ₈ () ⁵ ₈ x ¹ ₂ () ³ ₄ x ³ ₄ () ⁷ ₈ x 8 ¹ ₂ ¹ ₂ ³ ₈ ¹ ₂ ¹¹ ₁₆ ¹ ₂ ¹¹ ₁₆ ¹ ₂ ¹ ₈ ¹ ₂ ⁵ ₁₆ ⁷ ₈ ⁷ ₈ ¹ ₄ ¹ ₂ ⁷ ₈ ³ ₄ ⁷ ₁₆ ¹ ₈ All bushings can be supplied in steel, stainless steel and other materials. onsult subaki for more details. ] Available Upon Request A ¹ ₁₆ ³ ₁₆ ³ ₄ ¹⁵ ₁₆ ³ ₄ ¹⁵ ₁₆ ³ ₁₆ ¹ ₂ ³ ₈ ¹³ ₁₆ ¹⁵ ₁ ¹ ₂ ⁵ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₂ ⁷ ₈ ¹ ₂ ³ ₁₆ ¹ ₂ ¹¹ ₁₆ ⁹ ₁₆ ⁵ ₈ ¹³ ₁₆ ¹⁵ ₁₆ O φ (olt ircle) a olt ize or ushings and /" aper per oot on iameter K d A olt ize a /" aper per oot on iameter K A Metric Q tyle ushings ore Range Keyway(mm) ushing 8x. 8x. 8x. 8x. 0x. 0x. 0x. x. x. x. x. x. x. 8x. 8x. 0x.9 0x.9 x. x. x. x. 8x. K J Note denotes that the Q ushing is also available with metric bore size key way. All metric bores are supplied with imperial threads. All bushings can be supplied in steel, stainless steel and other materials. onsult subaki for more details. O O olt ize d φ (olt ircle) d or ushings,, Q, R,, and U or ushing 8 8

tyle ushings tyle eldon ubs hen compatibility really matters style bushings have been designed specifically for conveyor pulley applications.

44 tyle ushings tyle eldon ubs hen compatibility really matters style bushings have been designed specifically for conveyor pulley applications. hey offer improved holding power and ease of installation and removal compared to other bushing types. style bushings are available for all the major types and sizes of conveyor pulleys. imensions ap crews Approximate rench ushing eight orque U V ore Range ize (in. lbs.) ¹ ₈ ¹³ ₃₂ ⁷ ₈ ¹ ₁₆ ¹⁵ ₃₂ ¹³ ₁₆ ⁵ ₁₆ ³ ₄ ¹ ₈ ¹¹ ₁₆ ¹ ₈ ³ ₁₆ ¹ ₁₆ ³ ₈ ¹⁵ ₃₂ ⁵ ₈ ¹¹ ₁₆ ²⁵ ₃₂ ⁷ ₈ ¹⁵ ₁₆ ¹ ₈ ⁵ ₁₆ ³ ₈ ⁹ ₁₆ ³ ₄ ³ ₄ ¹⁵ ₁₆ ¹ ₄ ³ ₈ ¹¹ ₁₆ ¹⁵ ₁₆ ³ ₈ ³ ₄ ³ ₈ ³ ₄ ⁵ ₈ ¹⁵ ₁₆ ⁷ ₈ ³ ₄ ⁷ ₁₆ ⁵ ₁₆ ⁵ ₁₆ ¹ ₈ 8 0 ¹ ₈ ¹⁵ ₁₆ ¹⁵ ₁₆ ⁵ ₈ ¹⁵ ₁₆ 0 ⁵ ₈ ⁷ ₁₆ ³ ₁₆ ³ ₄ ⁹ ₁₆ ⁷ ₁₆ ¹ ₈ ⁷ ₈ 8 ⁵ ₁₆ 9 ⁷ ₈ ⁹ ₁₆ ⁷ ₈ ⁹ ₁₆ 8 ³ ₁₆ ³ ₁₆ ¹ ₄ ³ ₈ ³ ₁₆ ¹ ₄ ³ ₈ ¹ ₂ ¹ ₄ ³ ₈ ¹ ₂ ⁵ ₈ ³ ₈ ¹ ₂ ⁵ ₈ ³ ₄ ¹ ₂ ⁵ ₈ ³ ₄ ⁷ ₈ ⁵ ₈ ³ ₄ ⁷ ₈ ⁷ ₈ ¹ ₄ ¹ ₄ ¹ ₂ ¹ ₂ ³ ₄ ³ ₄ ¹ ₂ ¹ ₂ ⁵ ₈, ³ ₄, ⁷ ₈, ¹ ₈, ³ ₁₆, ¹ ₄ ⁷ ₁₆, ¹ ₂ ³ ₄, ³ ₁₆, ¹ ₄ ⁷ ₁₆, ¹ ₂, ¹¹ ₁₆ ¹⁵ ₁₆,, ³ ₁₆, ¹ ₄ ⁷ ₁₆, ¹ ₂, ¹¹ ₁₆ ¹⁵ ₁₆,, ³ ₁₆ ⁷ ₁₆ ⁷ ₁₆, ¹ ₂ ¹⁵ ₁₆, ³ ₁₆ ⁷ ₁₆, ¹¹ ₁₆ ¹⁵ ₁₆ ¹⁵ ₁₆, ³ ₁₆ ⁷ ₁₆, ¹¹ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ⁷ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆ ¹⁵ ₁₆, ⁷ ₁₆ ¹⁵ ₁₆ ⁷ ₁₆, ¹ ₂ ¹⁵ ₁₆, ⁷ ₁₆, ¹ ₂ ¹⁵ ₁₆, ¹ ₂ ¹⁵ ₁₆, 8 8 ¹ ₂, 9 9 ⁷ ₁₆, 9 ¹ ₂, 0 0 ¹ ₂, ¹ ₂, 8 ¹ ₄ x ⁵ ₁₆ x ³ ₈ x ³ ₄ ⁷ ₁₆ x ¹ ₂ ¹ ₂ x ³ ₄ ⁹ ₁₆ x ⁵ ₈ x ¹ ₄ ³ ₄ x ¹ ₂ ⁷ ₈ x ¹ ₂ x ¹ ₈ x ¹ ₂ ¹ ₈ x ¹ ₂ ¹ ₈ x ¹ ₂ ,00,80,000,800,00 9,000 9,000 9,000 subaki offers a complete line of style weldon hubs for insertion and welding. pecial dimensional hubs are available per your specifications on a MadetoOrder basis. All subaki hubs are made from steel bar stock (not powdered or sintered metal). he style weldon hubs listed below include appropriate tapered bores and mounting holes. ub ushing imensions apped oles eight Used O.. A V No. ize ⁷ ₁₆ ⁹ ₁₆ ¹³ ₁₆ ⁷ ₈ ¹ ₁₆ ¹ ₂ ³ ₄ ¹⁵ ₁₆ ³ ₁₆ ⁷ ₁₆ ¹ ₂ ⁷ ₁₆ ³ ₁₆ ³ ₄ ⁹ ₁₆ ⁷ ₁₆ ¹ ₈ ⁷ ₈ 8⁵ ₁₆ 9⁷ ₈ ⁹ ₁₆ ⁷ ₈ ⁹ ₁₆ 8¹³ ₁₆ ⁵ ₈ ¹³ ₁₆ ¹ ₈ ¹ ₂ ³ ₄ ¹ ₈ ¹ ₂ ³ ₄ ¹ ₈ ⁷ ₁₆ ¹ ₈ ¹³ ₁₆ A 8 ¹ ₄ 0UN ⁵ ₁₆ 8UN ³ ₈ UN ⁷ ₁₆ UN ¹ ₂ UN ⁹ ₁₆ UN ⁵ ₈ UN ³ ₄ 0UN ⁷ ₈ 9UN 8UN ¹ ₈ UN ¹ ₈ UN ¹ ₈ UN V O øv (olt ircle) eatures: elf seating Reduced end disc prestressing Minimal axial shaft movement qually spaced bolts for uniform drawup apscrew torquestoring capacity is maximized by the flange ull length engagement with the hub ull size keys in maximum bushing bore sizes 0 and larger U eatures: elf seating Reduced end disc prestressing Minimal axial shaft movement qually spaced bolts for uniform drawup apscrew torquestoring capacity is maximized by the flange ull length engagement with the hub ull size keys in maximum bushing bore sizes 0 and larger 8 8

owerocks hen easy installation really matters subaki owerlock eatures and enefits:.

associated with other connection alternatives.

and other drive components to a motordriven shaft, thus allowing easy attachment of shaft to hub

. liminates problems with keyway connections and limitations for Q and tapered bushings.

sheaves, conveyor pulleys, indexing applications, sprockets, gears, cams, levers, motors and

Available in both Inch and Metric sizes in a variety of styles.

stainless steel and electroless nickelplated finish, in addition to standard models. ore range: 0.

A Metric eries owerock apable of transmitting. to times the A eries rated torque capacity.

" to " (9mm to 00mm) K Inch eries owerock uitable for small shafts with a wide range of tolerances

45 owerocks hen easy installation really matters subaki owerlock eatures and enefits:. ellengineered, adjustable and affordable device that solves engineering and maintenance difficulties associated with other connection alternatives.. hafttohub friction connection that relies on concentric surface pressure to affix gears, sprockets and other drive components to a motordriven shaft, thus allowing easy attachment of shaft to hub without the time and money spent on machining or extra assembly labour.. liminates problems with keyway connections and limitations for Q and tapered bushings.. rictional, keyless system that enables transmission of hightorque and axial loads, and accomodates reversing, dynamic or shock loading.. subaki owerocks can be used in such common applications as the connection of timing pulleys, sheaves, conveyor pulleys, indexing applications, sprockets, gears, cams, levers, motors and hydraulics, clutches and brakes and flange couplings. Available in both Inch and Metric sizes in a variety of styles. A Inch eries owerock A Inch and Metric eries owerock Multipurpose locking devices available in stainless steel and electroless nickelplated finish, in addition to standard models. ore range: 0." to " (9mm to 00mm) Also available in larger sizes. lease contact subaki. A Metric eries owerock apable of transmitting. to times the A eries rated torque capacity. uitable for applications requiring very high torque. ore range: 0." to " (9mm to 00mm) K Inch eries owerock uitable for small shafts with a wide range of tolerances (m, k, js, h~h0). Available in stainless steel and electroless nickelplated K models. ore range: 0.8" to " (mm to 00mm) A Metric eries owerock imply constructed units with only an inner and an outer ring with a few locking bolts. ore range: 9mm to 0mm Metric eries owerock Although these shafthub locking devices cannot connect independently, they require minimum installation space and offer compact design configurations. ore range: 0mm to 0mm 8 8

hock Relays hen control really matters At subaki, our commitment is to bring you the highest value in the industry today. eriod.

hp 0hp hp 0hp hp 0hp 0hp 0hp 00hp 00V class 0.

rotect your equipment and investment with subaki shock relays and external current transformers. Unexpected shock loads can damage chains, drives, gears, turbines entire mechanical assemblies.

46 hock Relays hen control really matters At subaki, our commitment is to bring you the highest value in the industry today. eriod. tart ime hockime tandard pecification oad current (current setting range) * 0.~A ~0A ~0A 0~00A 0~00A 0~00A Applicable motor capacity 00V class 0.08hp.hp hp.hp 0hp hp 0hp hp 0hp 0hp 0hp 00hp 00V class 0.hp hp hp hp 0hp 0hp 0hp 0hp hp 0hp 0hp hp* And as a full line supplier of power transmission products, this commitment extends to our complete line of hock Relay products as well. rotect your equipment and investment with subaki shock relays and external current transformers. Unexpected shock loads can damage chains, drives, gears, turbines entire mechanical assemblies. hat means high maintenance, costly repairs and expensive downtime. est Reset tandard Usage Ambient temperature 0 o ~0 o Ambient humidity 8%R; no condensation ork environment Vibration ess than.9m/s Altitude ess than 000m Ambient atmosphere No corrosive gas, dust Unit model No urrent setting accuracy 0% (full scale) et time range tart time * 0.~0s hock time * 0.~0s Operation power source () A90~0V, 0/0z imply put, when the shock relay detects a problem, it acts like an electronic shear pin that shuts down the line quickly, safely and securely. hat means big savings in both time and money. After the problem is corrected, the shock relay is reset at the touch of a button. No tear down is required. hat means improved efficiency and reduced downtime. onnection erminals (contacts) rip urrent Unit arts motor circuit voltage urrent detection system elfholding Normal state At the time of trip Output Relay * ontact capacity Min. applicable load * Reset method Output relay Mechanical life span lectrical A00V, 0/0z wophase system Includes selfholding At start up there is a 0.s delay, then the output relay engages hen it trips or the power is shut off, the output relay is not engaged c contact, A0V A (in the case of a resistance load) 0V, 0mA ress the R button or cut the operation power 00,000,000 times 00,000 times est functions internal circuit and output relay operation check etween the circuit & case A000V, 0z, minute (power supply circuit and contact circuit) ithstand voltage etween contacts A000V, 0z, minute eries hock Relay etween circuit Gross mass hen A0V ower consumption hen A00V A000V, 0z, minute (power supply circuit and contact circuit) 0.kg (not including external ).VA (0.).0VA (.) IN rail mounting 0 cu 0 0 eries hock Relay lus xternal urrent ransformer Model s: 00, 00 and 00 xternal ortion xternal Model No. Not needed Rated primary current 00A 00A 00A Rated secondary current A Rated load VA Mass 0.kg he external current transformer is wired together with the series shock relay to provide overload protection for applications using large motors typically over 00A. xternal urrent ransformer Notes: *. uring normal operation the ouput relay is ON, and when the hock Relay operates it is O. *. hen directly inputting output relay contact into the programmable controller (), be aware that a minute electric current can cause contact failure. As for the input to, it is recommended to drive the relay coil for minute current by relay signal of hock Relay at first, then input this relay contact to. *. urrent and time setting ranges can be set within the warranty range, but not the upper or lower level of setting volume. *. hen motor size is over hp, please contact subaki. igital isplay hock Relay & xternal urrent ransformer Model : 88 89

awmill/laner Mill ayout Application elimber og Unscrambler ross ut lasher ebarker Infeed onveyor ebarker og eck in and Infeed Main awline Infeed onveyor Main awline Optimizer anter Quad anter dger 8

47 awmill/laner Mill ayout Application elimber og Unscrambler ross ut lasher ebarker Infeed onveyor ebarker og eck in and Infeed Main awline Infeed onveyor Main awline Optimizer anter Quad anter dger 8 rimmer 9 canner 0 urved onveyor rop orter laner tacker rapping Machine hallenge Impact load from operating conditions. og diameter varies from mill to mill, operating overload and jamups are common. and/grit conditions can lead to abrasion on. Remote access, ambda offers maintenancefree operation. tart/stop operation that is required by the operator which places demanding and varying loads on the drive chain. or Ring ebarkers. hock load from crooked logs. igh speed operation. or rum ebarkers. General operation overload and/or high impact. Access can be confined. ambda offers maintenancefree operation. or harp op hain tip wear can be the limiting factor. or rive hain high speed makes lubrication difficult. ots of articulation increases wear. or harp op hain tip wear can be the limiting factor. Relative length difference between strands is critical for proper operation. ambda is used to increase consistent life of all strands. imited surface contact can result in insufficient weld. ress fit is the correct construction. Relative length difference between strands is critical for proper operation. ambda is used to increase consistent life of all strands. Variable strand wear due to cycle difference. an only accept minimal elongation for proper indexing operation. ambda increases wear life. roducts subaki olution hain amily hain roduct prockets subaki tandard remium G hain uper eries Roller hain ambda Roller hain uper eries Roller hain uper eries Roller hain peedmaster uper eries Roller hain ambda Roller hain peedmaster harp op hain peedmaster harp op hain 8remium, 8ambda, remium, 8ambda, R and ambda urved hain remium onveyor hain. ambda. 0 cott, 0 cott 00 to 00 R00ambda to R0ambda R80 to 0 single and multi strand. R80 to 0 single and multi strand. R80M to 0M single and multi strand. uper0 to uper0r R00ambda to R0ambda R80M to 00M R harp op Usually, or with high hardness and as per drawing. Remote and need quick changout use plit tyle. orward/backward operation can result in keyway backlash use owerlock. Remote and need quick change use plit tyle. or quick changeout use plit tyle. orward/backward operation can result in keyway backlash use owerlock. Knife jamup can require back/forth operation which can cause keyway backlash use owerlock. Quality hardened teeth. Quality hardened teeth. R80M to 0M Misalignment is a common issue that reduces procket life. R80 to 0, or Quality hardened teeth. point, single or multi strand. subaki quick change press fit rimmer ugs K or subaki quick change press fit rimmer ug attachment every 8, 0 or links. R80U or R80Uambda c/w AO attachment 00, 00ambda, 8, 8 ambda, 99 Maintenancefree operation. ambda R00 to 0ambda or rive hain high speed makes lubrication difficult. ots of peedmaster R80M to 0M articulation increases wear. hock load. uper eries Roller hain or eaf hain R80 to 0, 0 Marking of product reduces grade and/or results in product loss. remium onveyor hain. ambda. 8ambda orklift eaf hain 8,8,0 Adjustable prockets that can be supplied as split for convenience and quick changeout. Adjustable prockets that can be supplied as split for convenience and quick changeout. Quality hardened teeth. plit and adjustable at the head. Quality hardened teeth. Misalignment is a common issue that reduces procket life. or quick changeout use plit tyle. (elded steel chain) R8, (), () onsider IR for abrasive resistance. (), () ()0, 0, 0. () with cradle attachment. (R)80(), also sizes 0, 0, 0 and. ith or without wing attachments. og deck infeed:, (IR) og deck: 8 camelback, 8, 8. 0,. (),.. riv. ()(R)0, 80(). an be supplied with wing attachments. ()(R)0, 80(). an be supplied with wing attachments. ()(R)0, 80(). an be supplied with wing attachments. orestry s critical AIAIOns 90 9

48 hen innovation really matters rive hain elded teel hain 0 onveyor hain 9 8 awmill laner Mill 9

elimber og Unscrambler Application: og Unscrambler avings: $,00.

standard chain, increasing the life from to months.

hallenge Impact loads from harsh operating conditions are common with elimber

owerlock procket plit procket olution rive chain: subaki standard premium grade chain

sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth

hallenge og diameter varies from mill to mill.

and and grit conditions can lead to abrasion on mill chains.

49 elimber og Unscrambler Application: og Unscrambler avings: $,00.00 subaki solution: subaki 00 was selected to replace an original design using standard chain, increasing the life from to months. It really mattered to this subaki customer O AVING! hallenge Impact loads from harsh operating conditions are common with elimber operations. owerlock procket plit procket olution rive chain: subaki standard premium grade chain complete with G feature of erformax lubegrooved bushings and ring coined connecting links. ypical size range for this application 0 cott to 0 cott prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth that is a necessity for the demands of this application. hallenge og diameter varies from mill to mill. Operating overload and jamups are common. and and grit conditions can lead to abrasion on mill chains. olution rive chain: chain provides up to 0% greater ultimate tensile strength over standard roller chain. Mill hain: IR (induction hardened barrels and rivets) for abrasive resistance. ypical size range for this application 00 to 0 R8, (), () prockets: Remote access and the need for quick changeout can be solved by split design mill chain sprockets. R 0 hain orward/backward operation can result in keyway backlash. he use of owerlock sprockets eliminates the need for a keyway. hain 9 9

ross ut lasher ebarker Infeed onveyor/ebarker hen strength really matters plit procket hallenge ebarker

his places demanding and varying loads on the drive chain.

roller chain. Mill chain prockets: orward/backward operation can result in keyway backlash.

ypical size range for this application R80 to 0 single and multi strand. ()0, 0, 0.

Also high speed operation limits the effectiveness of lubrication due to centrifugal force.

or drum debarkers, general operation overload and/or high impact.

50 ross ut lasher ebarker Infeed onveyor/ebarker hen strength really matters plit procket hallenge ebarker Infeed conveyor tart/stop operation is required by the operator. his places demanding and varying loads on the drive chain. ambda hain olution rive chain: chain provides up to 0% greater ultimate tensile strength over standard roller chain. Mill chain prockets: orward/backward operation can result in keyway backlash. he use of owerlock sprockets eliminates the need for a keyway. ypical size range for this application R80 to 0 single and multi strand. ()0, 0, 0. () with cradle attachment. hallenge ebarker or ring debarkers there is shock load from crooked logs. Also high speed operation limits the effectiveness of lubrication due to centrifugal force. Knife jamup can require forward / backward operation. or drum debarkers, general operation overload and/or high impact. hallenge olution ypical size range for this application olution rive chain: ambda chain offers maintenancefree operation. Mill chain prockets: Remote access and the need for quick changeout can be solved by split design sprockets. Remote access. ypical size range for this application R00ambda to R0ambda (), () rive chain: peedmaster designed for speeds greater than 00 feet per minute. pecial material, surface treatment and conn link. chain for higher tensile strength to resist shock load. rag chain prockets: orward/backward operation can result in keyway backlash. he use of owerlock sprockets eliminates the need for a keyway. or ring debarker R80M or to 0M or single and multi strand. or drum debarker uper 0 to uper 0. (R)80(), also sizes 0, 0, 0 and. ith or without wing attachments. 9 9

og eck in and Infeed MAIN A IN Application: anter in/out

subaki features and quality lasted 0 months.

plit procket hallenge rive: igh speeds can limit the

harp top conveyor: ips can wear prematurely compared to

olution rive chain: ambda chain offers maintenancefree

ambda hain ypical size range for this application R00ambda

harp top conveyor: N subaki spec sharp top chain increases

rag chain prockets: remium subaki sprockets with high

tooth that is a necessity for the demands of this

harp op hain R ypical size range for this application R80M

51 og eck in and Infeed MAIN A IN Application: anter in/out feeds avings: $9,00.00 subaki solution: revious chain brand suffered cracked sideplates and severe elongation after months. subaki features and quality lasted 0 months. It really mattered to this subaki customer O AVING! plit procket hallenge rive: igh speeds can limit the effectiveness of lubrication due to centrifugal force. harp top conveyor: ips can wear prematurely compared to normal wear of the load bearing chain components. olution rive chain: ambda chain offers maintenancefree operation. hallenge Access to the drive can be confined. ambda hain ypical size range for this application R00ambda to R0ambda olution rive chain: peedmaster designed for speeds greater than 00 feet per minute. pecial material, surface treatment and conn link. harp top conveyor: N subaki spec sharp top chain increases tip area hardness by 0%. his increases overall chain life. rag chain prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth that is a necessity for the demands of this application. harp op hain R ypical size range for this application R80M to 00M R harptop ()(R)0, 80(). an be supplied with wing attachments. Mill chain og deck infeed:, (IR) og deck: 8 camelback, 8,8. 0,. (),.. riv. prockets: Remote access and the need for quick changeout can be solved by split design sprockets. peedmaster hain 9 9

dger Application: ull dger rive avings: $,.

savings in replacement cost. It really mattered to this subaki customer O AVING!

tyle O O hallenge rive: igh speeds can limit the effectiveness of lubrication due to

harp top conveyor: ips can wear prematurely compared to normal wear of the load bearing

olution rive chain: peedmaster designed for speeds greater than 00 feet per minute.

harp top conveyor: N subaki spec sharp top chain increases tip area hardness by 0%.

rag chain prockets: remium subaki sprockets with high carbon 00 or 0 material allow for

rive chain/sprocket misalignment is common for this application.

strand. ()(R)0, 80(). an be supplied with wing attachments.

olution 8remium is used to provide consistent relative tolerance between strands.

52 dger Application: ull dger rive avings: $,.00 subaki solution: peedmaster lasted months at this mill, providing significant savings in replacement cost. It really mattered to this subaki customer O AVING! rimmer hen timing really matters harp op hain Quick rimmer ug (Q) remium Modular in tyle O O hallenge rive: igh speeds can limit the effectiveness of lubrication due to centrifugal force. harp top conveyor: ips can wear prematurely compared to normal wear of the load bearing chain components. olution rive chain: peedmaster designed for speeds greater than 00 feet per minute. pecial material, surface treatment and conn link. harp top conveyor: N subaki spec sharp top chain increases tip area hardness by 0%. his increases overall chain life. rag chain prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth. rive chain/sprocket misalignment is common for this application. ypical size range for this application R80M to 0M R80 to 0, or point, single or multi strand. ()(R)0, 80(). an be supplied with wing attachments. peedmaster hain hallenge Relative length difference between strands is critical for proper operation. elds on lugs can cause fatigue due to poor welds and/or insufficient contact area. olution 8remium is used to provide consistent relative tolerance between strands. 8 remium ambda is used to provide consistency and increased life. subaki s N trimmer lug design utilizes proper attachment chain construction principles of press fit vs. weld. in link plates are slip fit for ease of assembly. Quick connect rollers eliminate need for clip. rag chain prockets: Use remium subaki adjustable sprockets that can be supplied as split for convenience and quick changeout. ypical size range for this application 8premium, 8ambda, lug sizes to choose from ()(R)0, 80(). an be supplied with wing attachments. plit Adjustable procket 98 99

scanner urved conveyor hen flexibility really matters canner ugs on K attachment Attachment Interval urved Attachment hain

elds on lugs can cause fatigue due to poor welds and/or insufficient contact area.

8 remium ambda is used to provide consistency and increased life.

in link plates are slip fit for ease of assembly. Quick connect rollers eliminate need for clip.

prockets: Use remium subaki adjustable sprockets that can be supplied as split for convenience and quick changeout.

conveyor is subject to more cycles than the outer strand, therefore rate of wear is increased.

53 scanner urved conveyor hen flexibility really matters canner ugs on K attachment Attachment Interval urved Attachment hain hallenge Relative length difference between strands is critical for proper operation. elds on lugs can cause fatigue due to poor welds and/or insufficient contact area. olution 8 remium is used to provide consistent relative tolerance between strands. 8 remium ambda is used to provide consistency and increased life. subaki s N trimmer lug design utilizes proper attachment chain construction principles of press fit vs. weld. in link plates are slip fit for ease of assembly. Quick connect rollers eliminate need for clip. canner lug as illustrated below can also be used. prockets: Use remium subaki adjustable sprockets that can be supplied as split for convenience and quick changeout.. ypical size range for this application 8 remium 8 ambda, lug sizes to choose from hallenge Inner strand on a curved conveyor is subject to more cycles than the outer strand, therefore rate of wear is increased. olution ambda chain extends wear life by oil impregnated bushings contacting special surface pins. (ambda chain must be supported by sideplates rather than rollers). prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth that is a necessity for the demands of this application. ypical size range for this application R80U or R80Uambda c/w AO attachment every 8,0 or links. ambda hain plit Adjustable procket 00 0

rop ORR Application: rop orter avings: $,90.

Reduced replacement man time means cost savings.

laner Application: laner rive avings: $,0.

wear. igh speed operation makes proper lubrication difficult.

operation. Only minimal elongation is accepted for proper indexing operation.

consistent relative tolerance between strands.

prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a

application. plit and adjustable sprockets are recommended at the head shaft.

rive chain: peedmaster designed for speeds greater than 00 feet per minute.

54 rop ORR Application: rop orter avings: $,90.00 subaki solution: ambda extended the wear limit from 8 to months. Reduced replacement man time means cost savings. It really mattered to this subaki customer O AVING! laner Application: laner rive avings: $,0.00 subaki solution: rive running at 00 rpms makes peedmaster the only option. Resulting life was. months compared to. It really mattered to this subaki customer O AVING! plit Adjustable procket hallenge ots of articulation results in increased chain wear. igh speed operation makes proper lubrication difficult. hallenge Relative length difference between strands is critical for proper operation. Only minimal elongation is accepted for proper indexing operation. olution remium conveyor chain is required on this application to provide consistent relative tolerance between strands. remium ambda is used to provide consistency and increased life. prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth that is a necessity for the demands of this application. plit and adjustable sprockets are recommended at the head shaft. ypical size range for this application 00 / 00ambda, 8remium / 8ambda olution rive chain: peedmaster designed for speeds greater than 00 feet per minute. pecial material, surface treatment and conn link. prockets: remium subaki sprockets with high carbon 00 or 0 material allow for a consistent hardened tooth. rive chain/sprocket misalignment is common for this application. ypical size range for this application R80M to 0M 8 ambda hain peedmaster hain 0 0

tacker/ rapping Machine/orklift Other ignificant orestry Applications hen expertise really matters hain hallenge

olution tacker: chain provides up to 0% greater ultimate tensile strength over standard roller chain.

ypical size range for this application R80 to 0 8ambda orklift 8, 8, 0 Other ignificant orestry Applications here

Mill Application subaki olution aper Mill igester onveyor Infloor aper Roll onveyor Kraft aper ulp ress tainless steel

chain O Mill ardwood looring Mill Rackdown onveyor efore ress Indexer nd Groove rimmer recision matched and tagged

55 tacker/ rapping Machine/orklift Other ignificant orestry Applications hen expertise really matters hain hallenge tacker: hock load. rapping machine: Marking of product reduces grade and/or results in scrap product. olution tacker: chain provides up to 0% greater ultimate tensile strength over standard roller chain. rapping machine: ambda chain provides maintenancefree operation, eliminating the need for lubrication. ypical size range for this application R80 to 0 8ambda orklift 8, 8, 0 Other ignificant orestry Applications here subaki s xperience an ork or You. Mill Application subaki olution aper Mill igester onveyor Infloor aper Roll onveyor Kraft aper ulp ress tainless steel engineered class attachment incline conveyor Imperial and metric engineered class attachment conveyor uper series chain O Mill ardwood looring Mill Rackdown onveyor efore ress Indexer nd Groove rimmer recision matched and tagged attachment chain in both AM (ANI) and ritish standard recision matched and tagged ambda attachment 8 ambda hain M ooler hain ngineered class attachment conveyor chain M Mill iberboard ress uper series chain iomass Ash onveyor pecially hardened cast or welded steel chain 0 0

00 nd Groove rimmer Infloor aper Roll onveyor M Mill. 8.

56 Other ignificant orestry Applications hen expertise really matters aper Mill ardwood looring Mill /UN nd Groove rimmer Infloor aper Roll onveyor M Mill igester onveyor 0± M ooler hain O Mill iomass Rackdown onveyor efore ress Ash onveyor

echnical ervices hen experience really matters At subaki, we support what we sell. his means that we are your partner in reducing downtime, lowering maintenance costs and increasing productivity.

e can also tailor our inhouse seminar workshop to your individual needs.

57 echnical ervices hen experience really matters At subaki, we support what we sell. his means that we are your partner in reducing downtime, lowering maintenance costs and increasing productivity. Not everyone can say that. subaki s echnical ervices staff is available for onsite inspections and will recommend the best solution for your application. e can also tailor our inhouse seminar workshop to your individual needs. Our services include the following: Our services include the following: acility our and ull ay eminars procket Manufacturing acility our: earn the techniques and processes used in sprocket production Various eminar opics Available: Maintenance roubleshooting asic and Advanced roduct election hain Academy (asic chool) (Meals/snacks/beverages may be provided) Onite ervices Maintenance eminar ritical Application urvey Application roubleshooting ailure and ear Analysis Inouse ervices Maintenance eminar acility ours One ay eminars ailure and ear Analysis ample Identification hain election Application roubleshooting Maintenance eminars rofessional AudioVideo resentation andson earning ertificate of Attendance ourse Material andout ackage Metal hain ear cale Group icture ite urveys woerson eams from subaki hain Identification and rawing ear ife stimate Identify ondition and ritical oints stablish Regular ollowup chedule Report will be provided within week of survey completion Application roubleshooting and/or ear Analysis subaki echnical ervices taff ite Visit Initial valuation ull report will be provided within 8 hours of completion of site visit, including selection verification ailure and/or ear Analysis A full report will be provided within 8 hours and will include photos, failure/wear causes, effect and solutions If more time (ie. over 8 hours) is required to complete the final report, we will provide the findings to date in a preliminary report ample Identification hain number and sketch hain election imple election: A report that indicates selection process only Intermediate election: etailed Report rawing of elected roduct alculations ouble heck ign Off Advanced election (includes all of above plus:) xpected ife stimate Maintenance Requirements and chedule 08 09

Born to rule the Forest. For when it really matters

Born to rule the Forest. For when it really matters orn to rule the orest or when it really matters 0 o r e s t r y r o d u c t s a t a l o g u e hen forestry really matters roducts for the orestry Industry rive hains M (NI) tandard rive hain... peedmaster