2200/2300 Series. Low Profile Belt Conveyors Extruded Aluminum. General Specifications: Applications: 2200 Series Series

Transcription

1 2200/2300 eries Low Profile Belt Conveyors Extruded Aluminum 2200 eries 2300 eries General pecifications: idrive, Flat Belt End Drive, Cleated Belt End Drive and Center Drive models Gravity Roller models (2200 only) Modular Belt idrive, End Drive and Mid Drive models Precision Move Flat Belt End Drive, Cleated Belt End Drive and Flat Belt Mid Drive models (2200 only) 1.25 (32 mm) diameter head and tail pulleys idths: 2 (45 mm) to 24 (610 mm) Lengths: 1.5 (457 mm) to 30 (9,144 mm) Loads up to 200 lbs (90 kg) Optional Gang, Common or lave Drive models available Applications: mall Part Transfers Part Accumulation Precision Part Movement mall Part Handling and Positioning Part/Package Infeed and Outfeed Automated and Manual Assembly 8

2 2200/2300 eries V-Guided Belt Tracking Optional Nose Bar Transfer Rack and Pinion Belt Tensioning 2200 / 2300 ERIE MB ERIE PRECIION MOVE idrive 10 Flat Belt End Drive 12 Flat Belt Center Drive 14 Cleated Belt End Drive ERIE Gravity Roller 18 MODULAR BELT idrive 20 MODULAR BELT End Drive 22 MODULAR BELT Center Drive 24 Flat & Cleated Belt End Drive 26 Flat Belt Mid Drive 28 lave, Common, and Gang Drive 30 ervo Gearmotor & Accessories 33 Profiles 35 Belting 37 Gearmotor Mounting Packages 40 Gearmotors 53 upport tands 62 Accessories 68 Part Number Reference 74 9

3 2200 & 2300 eries: idrive pecifications: ealed ball bearings Belt idths: 2 (51 mm) to 18 (457 mm) Conveyor Lengths: 18 (457 mm) to 8 (2,438 mm) Belt peeds: Variable peed, (4) peed Options 1.7 to 17 ft/min (0.5 to 5 m/min) 3 to 24 ft/min (0.9 to 7 m/min) 5 to 50 ft/min (1.5 to 15 m/min) 7 to 70 ft/min (2 to 21 m/min) Conveyor Load Capacity (non-accumulated, distributed load): 1.7 to 17 ft/min Up to 25 lbs (11.3 kg) 3 to 24 ft/min Up to 25 lbs (11.3 kg) 5 to 50 ft/min Up to 25 lbs (11.3 kg) 7 to 70 ft/min Up to 12 lbs (5.4 kg) Indexing Capable Up to 30 indexes per minute Features & Benefits: Internally mounted gearmotor and control for space savings and tight work spaces Reduced integration time required to mount and wire the total conveyor package Ideal combination of conveyor and gearmotor sizing for small parts handling Variable peed and reversible for maximum application flexibility Control switches conveniently located in high impact protective case 1.25 diameter drive roller for smooth product transfer V-guided belts for maintenance-free belt tracking (4 and wider only) Maintenance-free brushless DC motor OPTIONAL: Customer ired Controls For ease of automation integration. Two ide Rail Options: T-lot OPTIONAL: 8 mm Nose Bar Transfer Available at non-driven end. peeds up to 75 ft/min (22 m/min). martlot Indicator T-Bar 2200 T-lot Technology: Drop in T-bar for ease and flexibility in mounting accessories elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris For support stands and accessories, see pages For ordering information, see page 74

4 2200 & 2300 eries: idrive 0.96 (24) 2.32 (59) RECOMMENDED FLO +.92 (23)* 4.5 (114) 1.81 (46) 1.81 (46) 6.01 (153) 6.01 (153) * 2 & 3 wide only 1.66 (42) 5.85 (149) L (at initial factory belt tension) 0.72 (18) 5.64 (143) OPTIONAL NOE BAR TRANFER 4.90 (124) 1.16 (30) 0.38 (10) 4.32 (110) 1.86 (47) -.16 (4) 3.00 (76) 2.25 (57) = Conveyor Belt idth Dim = in (mm) TANDARD IZE Conveyor idth Reference Conveyor Belt idth () 1.75 (44mm) 2.75 (70mm) 3.75 (95mm) 5 (127mm) 6 (152mm) 8 (203mm) 10 (254mm) Conveyor Length Reference increments up to (305mm) Conveyor Length (L) 1.5 (457mm) 0.12 (3mm) increments up to... 8 (2,438mm) NOTE: Duty cycle not continuous rated. 18 (457mm) Drive haft Position A B C D ince belts are being pulled, positions A & D are preferred. Pushing belts (B & C) reduce conveyor load capacity by approximately 66%. For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 11

5 2200 & 2300 eries: Flat Belt End Drive pecifications: Loads up to 80 lbs* (36 kg) Belt speeds up to 400 ft/min (122 m/min) Belt widths: 1.75 (44 mm) to 24 (610 mm) Conveyor lengths: 18 (457 mm) to 18 (5,486 mm) 1.25 (32 mm) diameter drive and idler pulleys turn approximately 4.2 (107 mm) of belt per revolution V-groove stainless steel bedplate 12 mm diameter integral drive shaft models available * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. OPTIONAL: 8 mm Nose Bar Transfer Available at non-driven end. peeds up to 75 ft/min (22 m/min). Features & Benefits: Two ide Rail Options: Quick five-minute belt change Rack and pinion belt tensioning for fast, accurate single-point belt tensioning Aluminum die cast head plates eliminate painted surfaces V-groove bedplate with guided belt T-lot provides positive belt tracking, even under demanding side T-Bar load applications Non V-guided belts use our patented 2200 T-lot Technology: belt tracking cams, offering you Drop in T-bar for ease and flexibility the widest belt selection possible in mounting accessories trong, box-like construction resists damaging frame twist 50% more belt take-up extends conveyor belt life Belt take-up indicators for at a glance readings of remaining belt life T-slots make mounting accessories simple with no drilling or special tools (2200) tand mounting brackets are easily re-positioned along the T-slot (2200) martlot mounting system for attachments feature clean sides (2300) Motion sensor switch ready ealed ball bearings martlot Indicator elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris OPTIONAL: Dual or Idler End Output hafts Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages For ordering information, see page 74 xx

6 2200 & 2300 eries: Flat Belt End Drive +.92 (23) Position A 1.66 (42) RECOMMENDED FLO +.68 (17) 5.64 (143) OPTIONAL NOE BAR TRANFER.38 (10) Through HEX 5.85 (149) L [at initial factory belt tension] Position D 2.10 (53) 0.72 (18) 5.50 (140) OPTIONAL GANG DRIVE 4 X 4 X 22mm Keyway 1.28 (33) 1.86 (47) 4.32 (110) 4.90 (124) 1.16 (30) 1.28 (33) 0.38 (10) 2.25 (57) 3.00 (76) -.16 (4) = Conveyor Belt idth Dim = in (mm) TANDARD IZE Conveyor idth Reference Conveyor Belt idth () 1.75 (44mm) 2.75 (70mm) 3.75 (95mm) 5 (127mm) Conveyor Length Reference increments up to Conveyor Length (L) 1.5 (457mm) 0.12 (3mm) increments up to (5,486mm) 6 (152mm) 8 (203mm) NOTE: Lengths 13 to 18 available in widths 6 to 24 only. NOTE: Conveyor longer than 12 (3,658 mm) will be constructed using a multiple piece frame. Consult factory for locations. Gang Drive Conveyors: Non-V-guided belts up to 24 (610 mm) wide, V-Guided belts up to 18 (457 mm) wide. 10 (254mm) 12 (305mm) 18 (457mm) 21 (533mm) 24 (610mm) Drive haft Position A B C D ince belts are being pulled, positions A & D are preferred. Pushing belts (B & C) reduce conveyor load capacity by approximately 66%. For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 13

7 2200 & 2300 eries: Flat Belt Center Drive pecifications: Loads up to 120 lbs* (54 kg) Belt speeds up to 400 ft/min (122 m/min) Belt widths: 1.75 (44 mm) to 24 (610 mm) Conveyor lengths: 24 (610 mm) to 24 (7,315 mm) 1.25 (32 mm) diameter drive and idler pulleys turn approximately 4.2 (107 mm) of belt per revolution V-groove stainless steel bedplate 12 mm diameter integral drive shaft models available * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. COMING OON: Compact Mid Drive Contact factory for details. Features & Benefits: Center Drive module frees up both ends of conveyor for operator and machine interface Center Drive module can be easily repositioned along the length of the conveyor Maintenance-free gas-spring belt tensioner maintains uniform belt tension Aluminum die-cast head plates eliminate painted end surfaces V-groove bedplate with guided belt provides positive belt tracking, even under demanding side load applications Non V-guided belts use our patented belt tracking cams, offering you the widest belt selection possible trong, box-like construction resists damaging frame twist 2 (51 mm) of belt take up extends conveyor belt life T-slots make mounting accessories simple with no drilling or special tools (2200) tand mounting brackets are easily re-positioned along the T-slot (2200) martlot mounting system for attachments feature clean sides (2300) Motion sensor switch ready ealed ball bearings T-Bar Two ide Rail Options: T-lot 2200 T-lot Technology: Drop in T-bar for ease and flexibility in mounting accessories Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages OPTIONAL: 8mm Nose Bar Transfer Available at either end. Belt peed up to 75 ft/min (22 m/min). martlot Indicator elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris 14 For ordering information, see page 75

8 2200 & 2300 eries: Flat Belt Center Drive Position A recommended flow 1.72 (44) w w+.68 (17) 5.64 (143) 1.66 (42) optional nose BAr transfer 5.85 (149) 12 mm Position d L [at initial factory belt tension) 3.91 (99) 0.72 (18) 4 x 4 x 22mm KeywAy w+1.63 (41) w 0.85 (21) 4.32 (110) 4.55 (116) 1.28 (33) 1.16 (30) 1.86 (47) 4.90 (124) (266) 2.25 (57) 3.00 (76) 0.38 (10) w-.16 (4) = Conveyor Belt idth Dim = in (mm) TANDARD IZE Conveyor idth Reference Conveyor Belt idth () 1.75 (44mm) 2.75 (70mm) 3.75 (95mm) 5 (127mm) Conveyor Length Reference increments up to Conveyor Length (L) 2 (610mm) 0.12 (3mm) increments up to (7,315mm) 6 (152mm) 8 (203mm) NOTE: Lengths 13 to 18 available in widths 6 to 24 only. NOTE: Conveyor longer than 12 (3,658 mm) will be constructed using a multiple piece frame. Consult factory for locations. Gang Drive Conveyors: Non-V-guided belts up to 24 (610 mm) wide, V-Guided belts up to 18 (457 mm) wide. 10 (254mm) 12 (305mm) 18 (457mm) 21 (533mm) 24 (610mm) Drive haft Position A d Reversing Belt Direction reduces conveyor load capacity by 66%. For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 15

9 2200 & 2300 eries: Cleated Belt End Drive pecifications: Loads up to 80 lbs* (36 kg) Belt speeds up to 400 ft/min (122 m/min) Belt widths: 1.75 (44 mm) to 24 (610 mm) Conveyor lengths: 18 (457 mm) to 18 (5,486 mm) Cleats available from 0.24 (6 mm) to 2.36 (60 mm) high 1.25 (32 mm) diameter drive and idler pulleys turn approximately 4.2 (107 mm) of belt per revolution V-groove stainless steel bedplate 12 mm diameter integral drive shaft models available * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. Note: tandard idler pulley houses a small magnet which may be omitted upon request for magnetically sensitive products and applications. Features & Benefits: Two ide Rail Options: Quick five-minute belt change Rack and pinion belt tensioning for fast, accurate single point belt tensioning Aluminum die cast head plates eliminate painted surfaces V-groove bedplate with guided belt T-lot provides positive belt tracking, even under demanding side load T-Bar applications Non V-guided belts use our patented 2200 T-lot Technology: belt tracking cams, offering you the Drop in T-bar for ease and flexibility widest belt selection possible in mounting accessories trong, box-like construction resists damaging frame twist 50% more belt take-up extends conveyor belt life T-slots make mounting accessories simple with no drilling or special tools (2200) tand mounting brackets are easily re-positioned along the T-slot (2200) martlot mounting system for attachments feature clean sides (2300) Motion sensor ready ealed ball bearings martlot Indicator elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris OPTIONAL: Dual or Idler End Output hafts Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages For ordering information, see page 75

10 2200 & 2300 eries: Cleated Belt End Drive Position A recommended flow w-1.00 (25) w w+.68 (17) Position d 2.10 (53) 4 x 4 x 22mm KeywAy 5.85 (149) L [at initial factory belt tension] 0.72 (18) w+1.25 (32) w-1.20 (30) [Cleat width] x 0.38 (10) 2.25 (57) 4.32 (110) 1.28 (33) 3.00 (76) 6.65 (169) 1.16 (30) 1.86 (47) = Conveyor Belt idth Dim = in (mm) w-.16 (4) 4.90 (124) x = 2.44 (62) for f & G 2.94 (75) for A & H 4.14 (105) for B, C, v & J cleats TANDARD IZE Conveyor idth Reference Conveyor Belt idth () 1.75 (44mm) 2.75 (70mm) 3.75 (95mm) 5 (127mm) Conveyor Length Reference increments up to Conveyor Length (L) 1.5 (457mm) 0.12 (3mm) increments up to (5,486mm) 6 (152mm) 8 (203mm) NOTE: Lengths 13 to 18 available in widths 6 to 24 only. NOTE: Conveyor longer than 12 (3,658 mm) will be constructed using a multiple piece frame. Consult factory for locations. Gang Drive Conveyors: Non-V-guided belts up to 24 (610 mm) wide, V-Guided belts up to 18 (457 mm) wide. 10 (254mm) 12 (305mm) 18 (457mm) 21 (533mm) 24 (610mm) Drive haft Position A B C D ince belts are being pulled, positions A & D are preferred. Pushing belts (B & C) reduce conveyor load capacity by approximately 66%. For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 17

11 2200 eries: Gravity Roller pecifications: Loads up to 80 lbs/ft* (119 kg/m) Conveyor widths: 6" (152 mm), 12" (305 mm), 18" (457 mm) and 24" (610 mm) Conveyor lengths: 2 (610 mm) to 12 (3,658 mm) in 6" (152 mm) increments Rollers: 1 (25 mm) diameter rollers on 1.2" (31 mm), 2.4" (61 mm) or 3.6" (91 mm) centers Roller material: Anodized aluminum tube with steel ball bearing ide T-slot fits Dorner drop in hardware Lower T-slot fits standard M6 square nuts * Conveyor load capacity depends on conveyor size, incline, accumulated loads and other factors. Features & Benefits: 1" roller on 1.2"centers better small part handling 44% stronger while 42% lighter tandard lengths available in 6" increments ingle piece frame lengths to 12' long Lower T-slot integrates with stand, eliminating the need for mounting brackets Lower cost with better performance OPTIONAL: End top Roller Quantity Length # of Rollers Roller Centers 1.2" (31mm) 2.4" (61mm) 3.6" (91mm) Load Capacity (lbs/ft) # of Rollers Load Capacity (lbs/ft) # of Rollers Load Capacity (lbs/ft) 2 (610) (914) (1,219) (1,524) (1,829) (2,134) (2,438) (2,743) (3,048) (3,353) (3,658) NOTE: It is recommended that 3 rollers be in contact with the product at all times. For support stands and accessories, see pages For ordering information, see page 76

12 2200 eries: Gravity Roller (26) +.47 (12) 0.60 (15) Roller Centers 0.60 (15) (ee tandard ize Charts Below) 1.56 (40) 2.06 (52) 2.00 (51) All conveyors are shipped with a roller at each end. Depending on roller centers, one odd roller space may occur. All frames are punched for rollers 0.6" (15) from each end on 1.2" (31) centers = Conveyor idth Dim = in (mm) TANDARD IZE Conveyor idth Reference Conveyor Frame idth () 6 (152mm) 12 (305mm) 18 (457mm) 24 (610mm) Conveyor Roller idth (inch) 5 (127mm) 11 (279mm) 17 (432mm) 23 (584mm) Conveyor Length Reference (LLLL) increments up to Conveyor Length (feet) 2 (610mm) 0.5 (152mm) increments up to (3,658mm) Roller Center Reference () Roller Centers (inch) 1.2 (31mm) 2.4 (61mm) 3.6 (91mm) For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 19

13 2200 & 2300 eries: Modular Belt idrive pecifications: ealed ball bearings Belt widths: 4 (102 mm), 8 (203 mm), 12 (305 mm), 24 (610 mm) Conveyor Lengths: 18 (457 mm) to 10 (3,048 mm) Belt peeds: Variable peed, (4) peed Options 2 to 20 ft/min (0.6 to 6.1 m/min) 2.8 to 28 ft/min (0.9 to 8.5 m/min) 6 to 69 ft/min (1.8 to 21 m/min) 8 to 82 ft/min (2.4 to 25 m/min) Conveyor Load Capacity (non-accumulated, distributed load): 2 to 20 ft/min Up to 75 lbs (34 kg) 2.8 to 28 ft/min Up to 65 lbs (29 kg) 6 to 69 ft/min Up to 45 lbs (20 kg) 8 to 82 ft/min Up to 25 lbs (11.3 kg) Indexing Capable Up to 30 indexes per minute * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. OPTIONAL: 0.31 Nose Bar Transfer Belt peed up to 175 ft/min (53.3 m/min). Features & Benefits: Internally mounted gearmotor and control for space savings and tight work spaces Reduced integration time required to mount and wire the total conveyor package Ideal combination of conveyor and gearmotor sizing for small parts handling Variable peed for maximum application flexibility Control switches conveniently located in high impact protective case 1.5 diameter drive roller for smooth product transfer 0.33 (8 mm) pitch modular belt for small part handling and smooth operation T-lots make mounting accessories simple with no drilling or special tools (2200) tand mounting brackets are easily re-positioned along the T-lot (2200) martslot mounting system for attachments feature clean sides (2300) Maintenance-free brushless DC motor T-Bar Two ide Rail Options: T-lot 2200 T-lot Technology: Drop in T-bar for ease and flexibility in mounting accessories martlot Indicator elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages For ordering information, see page 76

14 2200 & 2300 eries: Modular Belt idrive Position A FLO (36) 6.12 (155) Position D L 6.01 (153) 2.25 (57) 6.19 (157) 0.38 (10) 2.25 (57) 3.00 (76) TANDARD IZE Conveyor idth Reference Conveyor Frame idth () 4.1" (104mm) 8.1" (206mm) 12.1" (307mm) 24.1" (612mm) Conveyor Length Reference increments up to Conveyor Length (L) 18" (457mm) 0.1" (3mm) increments up to... 10' (3,048mm) +.74 (19) 1.86 (47) 3.01 (77) Drive haft Position A d 0.78 (20) 0.39 (10) 6.07 (154) OPTIONAL NOE BAR TRANFER -.06 (2) 5.08 (129) = Conveyor Belt idth Dim = in (mm) For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 21

15 2200 & 2300 eries: Modular Belt End Drive pecifications: Loads up to 150 lbs* (68 kg) Belt speeds up to 250 ft/min (76 m/min) Belt widths: 4 (102 mm), 8 (203 mm), 12 (305 mm), 24 (610 mm) Conveyor lengths: 18 (457 mm) to 30 (9,144 mm) 1.5 (38 mm) pitch diameter 15 tooth drive pulley turns approximately 4.7 (121 mm) of belt per revolution 0.33 (8 mm) micro pitch modular belt 12 mm diameter integral drive shaft Belt return system is full length UHM support models available * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. OPTIONAL: 0.31 Nose Bar Transfer Belt peed up to 175 ft/min (53.3 m/min). Features & Benefits: 0.33 (8 mm) pitch modular belt for small part handling and smooth operation Modular belt features a flat belt surface ideal for inspection and label applications Aluminum die cast head plates eliminate painted surfaces procket driven belt and side guides provide worry free belt tracking trong, box-like construction resists damaging frame twist T-lots make mounting accessories simple with no drilling or special tools (2200) tand mounting brackets are easily re-positioned along the T-lot (2200) martslot mounting system for attachments feature clean sides (2300) ealed ball bearings T-Bar Two ide Rail Options: T-lot 2200 T-lot Technology: Drop in T-bar for ease and flexibility in mounting accessories Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages martlot Indicator elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris 22 For ordering information, see page 76

16 2200 & 2300 eries: Modular Belt End Drive Position A FLO (36) +.74 (19) Position D 1.95 (50) L 6.01 (153) 0.88 (22) 2.25 (57) 0.88 (22) 3.01 (77) 0.38 (10) 4.32 (110) 3.00 (76) 2.25 (57) TANDARD IZE Conveyor idth Reference Conveyor Frame idth () 4.1" (104mm) 8.1" (206mm) 12.1" (307mm) 24.1" (612mm) Conveyor Length Reference increments up to Conveyor Length (L) 18" (457mm) 0.1" (3mm) increments up to... 30' (9,144mm) Drive haft Position A d 0.78 (20) 0.39 (10) 6.07 (154) OPTIONAL NOE BAR TRANFER 4 x 4 x 22mm Keyway -.06 (2) 5.08 (129) = Conveyor Belt idth Dim = in (mm) For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 23

17 2200 & 2300 eries: Modular Belt Center Drive pecifications: Loads up to 150 lbs* (68 kg) Belt speeds up to 250 ft/min (76 m/min) Belt widths: 4 (102 mm), 8 (203 mm), 12 (305 mm), 24 (610 mm) Conveyor lengths: 32 (813 mm) to 30 (9,144 mm) 1.5 (38 mm) pitch diameter 15 tooth drive pulley turns approximately 4.7 (121 mm) of belt per revolution 0.33 (8 mm) micro pitch modular belt 12 mm diameter integral drive shaft Belt return system is full length UHM support * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. OPTIONAL: 0.31 Nose Bar Transfer Belt peed up to 175 ft/min (53.3 m/min). Features & Benefits: Center drive can be positioned along conveyor frame Center drive frees up both ends of conveyor for operator and machine interface 0.33 (8 mm) pitch modular belt for small part handling and smooth operation Modular belt features a flat belt surface ideal for inspection and label applications procket driven belt and side guides provide worry free belt tracking trong, box-like construction resists damaging frame twist T-lots make mounting accessories simple with no drilling or special tools (2200) tand mounting brackets are easily re-positioned along the T-lot (2200) martslot mounting system for attachments feature clean sides (2300) ealed ball bearings T-Bar Two ide Rail Options: T-lot 2200 T-lot Technology: Drop in T-bar for ease and flexibility in mounting accessories Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages martlot Indicator elf Tapping crew 2300 martlot Technology: Functions like a T-lot without collecting debris 24 For ordering information, see page 76

18 2200 & 2300 eries: Modular Belt Center Drive 0.78 (20) (36) FLO +.74 (19) 0.39 (10) L 6.01 (153) 6.01 (153) 3.01 (77) 2.25 (57) 5.08 (129) 0.38 (10) 2.25 (57) (261) 7.27 (185) 3.00 (76) 8.00 (203) TANDARD IZE Conveyor idth Reference Conveyor Frame idth () 4.1" (104mm) 8.1" (206mm) 12.1" (307mm) 24.1" (612mm) Conveyor Length Reference increments up to Conveyor Length (L) 2.67' (813mm) 0.1" (3mm) increments up to... 30' (9,144mm) Drive haft Position A d 6.07 (154) OPTIONAL NOE BAR TRANFER (56) = Conveyor Belt idth Dim = in (mm) For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 25

19 2200 Precision Move: Flat & Cleated Belt End Drive pecifications: Loads up to 200 lbs* (91 kg) Belt speeds up to 370 ft/min (113 m/min) Belt widths: 1.75 (44 mm) to 24 (610 mm) Conveyor lengths: 18 (457 mm) to 30 (9,144 mm) 1.5 (38 mm) pitch diameter drive pulley turns approximately 4.7 (121 mm) of belt per revolution T10 profile cogged belt with 12 tooth drive pulley Conveyor mechanical accuracy ± 0.02 Conveyor package w/servo motor index accuracy ± mm diameter integral drive shaft models available * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. Positive Drive Belting OPTIONAL: 3 Cleat Heights Available (20 mm, 36 mm, or 52 mm) Features & Benefits: High load capacity positive drive no slip belting Cogged belt and side guides provide worry free belt tracking No capacity drop when pushing belt Use optional cleats to create pockets for controlled part flow Rack and pinion belt tensioning for fast, accurate single-point belt tensioning T-slots make mounting accessories simple with no drilling or special tools Ability to drive multiple conveyors with Common and lave Options Common drive conveyors run at exact same speed keeping wide parts in alignment Optional dual or idler end output shafts lave driven conveyors can run at same speed or different speeds for gapping and pacing Compatible with standard drive packages Available with servo motor and mounts for increased accuracy of index trong, box-like construction resists damaging frame twist Aluminum die cast head plates eliminate painted surfaces Common, lave, and ervo Positioning Applications (see pages 30-33) Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages For ordering information, see pages 77 and 78

20 2200 Precision Move: Flat & Cleated Belt End Drive (43) Position B Position A -C CLEAT IDTH (26) +.68 (17) A Position C Position D CLEATED BELT 2.09 (53) A = 6.10 (155) for 1" HIGH IDE 7.10 (180) for 2" HIGH IDE C = 1.12 (29) for conveyors up to 8 widths 2.12 (54) for conveyors in widths 5.94 (151) L (at initial factory belt tension) 0.84 (21) 0.81 (21) 4 x 4 x 22mm Keyway 1.28 (33) 2.01 (51) 0.38 (10) 4.32 (110) 3.00 (76) 2.25 (57) 5.05 (128) -.16 (4) FLAT BELT = Conveyor Belt idth Dim = in (mm) TANDARD IZE Conveyor idth Reference Conveyor Belt idth () 1.75" (45mm) 2.75" (70mm) 3.75" (95mm) 6.0" (152mm) 8.0" (203mm) 12.0" (305mm) 18.0" (457mm) 24.0" (607mm) Conveyor Length Reference increments up to Conveyor Length (L) 1.5' (457mm) 0.1" (2.54mm) increments up to... 30' (9,144mm) Drive haft Position A B C D NOTE: Actual conveyor length may need to be adjusted to match belt pitch. All positions available with no loss in carrying capacity. For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 27

21 2200 & 2300 eries: Flat Belt MID Drive pecifications: Loads up to 200 lbs* (91 kg) Belt speeds up to 370 ft/min (113 m/min) Belt widths: 1.75 (44 mm) to 24 (610 mm) Conveyor lengths: 18 (457 mm) to 30 (9,144 mm) 2 (51 mm) pitch diameter drive pulley turns approximately 6.3 (160 mm) of belt per revolution T10 profile cogged belt with 16 tooth drive pulley Conveyor mechanical accuracy ± 0.02 Drive shaft options 12 mm diameter integral drive shaft 16 tooth 0.5 diameter hollow spline drive models available * Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. Positive Drive Belting Features & Benefits: High load capacity positive drive no slip belting Cogged belt and side guides provide worry free belt tracking T-slots make mounting accessories simple with no drilling or special tools Mid mount can be positioned along conveyor frame Mid mount frees up both ends of conveyor for operator and machine interface Ability to drive multiple conveyors with Gang drive option Thru shaft available for gang drives (adjustable spacing) Gang drive conveyors run at exact same speed keeping wide parts in alignment Rack and pinion belt tensioning for fast, accurate single-point belt tensioning Available with standard bottom and side drive packages trong, box-like construction resists damaging frame twist Aluminum die cast head plates eliminate painted surfaces Gang Drive with Adjustable pacing (see page 32) Order gearmotor mounting packages and gearmotors separately, see pages For support stands and accessories, see pages For ordering information, see page 78

22 2200 Precision Move: Flat Belt Mid Drive Position A 4.28 (109) 2.78 (71) (43) +.68 (17) Position D 6.61 (168) 16 TOOTH HOLLO HAFT PLINE VERION L (at initial factory belt tension) 2.09 (53) 5.94 (151) 4.28 (109) 2.78 (71) 5.01 (127) 1.28 (33) 2.01 (51) 6.61 (168) = Conveyor Belt idth Dim = in (mm) TANDARD IZE Conveyor idth Reference Conveyor Belt idth () 1.75" (45mm) 2.75" (70mm) 3.75" (95mm) 6.0" (152mm) 8.0" (203mm) 12.0" (305mm) 18.0" (457mm) 24.0" (607mm) Conveyor Length Reference increments up to Conveyor Length (L) 1.5' (457mm) 0.1" (2.54mm) increments up to... 30' (9,144mm) Drive haft Position A B C D NOTE: Actual conveyor length may need to be adjusted to match belt pitch. All positions available with no loss in carrying capacity. For more information, go to Call or Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 29

23 2200 Precision Move: lave Insert Drive title(s) Configurations here lave Drive Configurations Features: Link multiple conveyors with 1 drive Adjustable angle from 0 to 25 Variety of timing belt ratios available 1:1, 1.27:1, 1.75:1, 2:1 can be used to speed or slow down the conveyor Pull or close gaps between product Change belt types on each conveyor Includes tie plates, pulley kit, tension adjustment and guard Maximum number of conveyors = 3 Benefits: ave money by using less drives Flexibility to create your solution Utilize low, high friction belts, and/or multiple speeds in a single configuration lave Drive Kit 2.93 (74) 0.83 (21) 3.28 (83) 4.85 (123) Part Number Drive Teeth Driven Teeth Infeed Conveyor peed Condition (257) X peed Up 1.75X peed Up 1.27X peed Up ame peed 0.78X low Down 0.57X low Down 2X low Down Note: Not for cleated belt applications Kit Includes: Tie plates for both sides of conveyor Timing belt / pulleys and guard 30 Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.

24 2200 Precision Move: Common Drive Kits Y Common Drive Kits Features: Exact speed match conveyors Cleats stay in time Parts can be wider than conveyor Conveyors can be different widths & lengths Minimum width (x) = 2.65 (67 mm) belt to belt Maximum width (y) = 48 (1,219 mm) belt to belt Maximum number of conveyors = 3 Maximum total torque = 100 in-lbs Keyless coupling allows belt synchronization between conveyors Includes shafts, couplings and guards Conveyor tie kits ordered separately Benefits: X Common Drive (Fixed idth) Keeps parts from skewing ave money by using less drives 4.53 (115) Conveyor Tie Kit Y X 1.91 (49) Common Drive Kit 6.54 (166) 5.95 (151) 2.98 (76) Total idth 2200 PRECIION MOVE: COMMON DRIVE KIT GGGGG 2200 PRECIION MOVE: COMMON DRIVE TABLE MOUNT TIE KIT 39MCT - -Y Gap Between Belt Edges (X): (2.65 ) to (48.00 ) Note: One kit must be ordered for each pair of conveyors Kit Includes: hafts, couplings and guards Rigid tie plate for alignment Kit Includes: Conveyor mounting brackets upport extrusion Number of Conveyors: 1 to 6 Total idth: 02 to 48 Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 31

25 2200 Precision Move: Gang Insert Drive title(s) Mounts here Mid Drive Gang Driven Conveyors Features: Adjustable for various product widths Drive moveable between tails Frees up ends of conveyor Conveyor center distances can be moved while conveyor is running Minimum width (x) = 4 (101 mm) belt to belt (with std. guarding) Minimum width (x) = 1.75 (45 mm) belt to belt without guarding (end user responsible for point of installation guarding) Maximum width (y) = 48 (1,219 mm) belt to belt Maximum total torque = 80 in-lbs Compatible with side mount gearmotor package Requires ½ diameter 16 tooth spline drive shaft X Y Benefits: Flexibility to adjust to various product sizes ave money by using less drives Frees up ends of conveyors Gang Drive (Adjustable idth) Gang Drive ide Mount Package END GUARD LENGTH (ORDER PECIFIC) Features: Compatible with all standard load and heavy load 90 gearmotors Conveyor position is adjustable along length of spline drive shaft Includes shafts, couplings, and expandable shaft guarding Mount package is attached to the first conveyor Maximum number of conveyors = 3 Maximum total torque = 80 in-lbs 4.00 (102) MINIMUM (610) MAXIMUM 5.75 (146) (1219) MAXIMUM 5.09 (129) Adjustable Position Conveyor Mount Available, CONTACT FACTORY 1.58 (40) 3.51 (89) Refer to page 49 for belt speed options. Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 32 For ordering information, see page 80

26 2200 Precision Move: ervo Gearmotor Precision Move ervo Gearmotor Features: Motor: Gearbox: tandard bottom and flush mount bottom drive configurations Indexes per minute rating = 100 per minute Conveyor/Drive Package Index accuracy = ± Kollmorgen AKM eries Motor Brushless DC ervomotor with encoder 80 mm Frame 1.02 k Up to 640 VDC input Up to 2.62 amps Quick disconnect power and communication fittings UL, CE, RoH Compliant Inline Planetary Reducer 4:1 Ratio 93% efficient 13 arc-minute backlash 20,000 hr rated RoH compliant Part Number Controller Voltage Max Belt peed (Ft/min) Bottom Mount Flush Mount Min Belt peed (Ft/min) Torque (in-lb) RPM 22M004PR2B1K 115V input 230V input (59) 0.66 (17) (Bottom Mount) 9.29 (236) (Bottom Mount) 10.0 (254) (Flush Mount) 8.39 (213) 6.29 (160) 4.11 (104) (274) Precision Move ervo Bottom and Flush Mount Package Features: Capable of standard bottom mount position and flush mount for wide product handling Includes rack and pinion timing belt tension system providing reversing capability Includes high strength timing belt drive pulleys Description Motor / Gearhead Part Number Bottom Mount Flush Mount Bottom Mount Flush Mount ervo Gearmotor ervo Gearmotor Nema 34 Gearhead Nema 34 Gearhead A* A* A* A* *A = Mount position (A, B, C, D) Gearmotor Pulley 36 tooth 36 tooth 36 tooth 36 tooth Conveyor Pulley 32 tooth 21 tooth 32 tooth 21 tooth Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 33

27 2200 Precision Move: ACCEORIE Insert title(s) here Precision Move ervo Gearhead Only Effective Reduction Ratio Conveyor peed Multiply Factor Part Number Bottom Mount Flush Mount Bottom Mount Flush Mount 22M004PRN : : 1 (Motor RPM) (0.111) (Motor RPM) (0.169) 1.25 (32) 0.50 (13) 2.74 (70) 1.37 (35) 2.74 (70) 3.54 (90) 0.06 (2) 6.29 (160) 4.11 (104) 1.37 (35) MATING NEMA 34 ERVO DIMENION 9.29 (236) (Bottom Mount) 10.0 (254) (Flush Mount) Features: Offered as mount package and gearhead only tandard Nema 34 input mounting dimensions Inline planetary reducer 4:1 ratio 93% efficient 13 arc-minute backlash 20,000 hr rated RoH compliant 2.30 (59) 0.66 (17) (Bottom Mount) 8.43 (214) 5.23 (133) 34 Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.

28 2200 & 2300 eries: Profiles 3.53 (90) 0.59 (15) (2200/2300) 0.84 (21) (2200 Precision Move) 2.03 (52) 01 Low ide (32) 04 3 (76) Aluminum ide -.62 (16) (32) 1.17 (30) (32) (38) Aluminum ide 07* Low to ide iper (Not available on Precision Move) -.56 (14) 1.0 (25) (32) 1.11 (28) (32) (13) Aluminum ide (13) Extruded Plastic (Do not use with belt #64) (Not available on Precision Move) 5.85 (149) MAX (203) MIN MAX (203) MIN 5.91 (150) 0.97 (25) (392) MAX 13 Adjustable Guiding 1.0 (25) (392) MAX 14 Tool-less Adjustable Guiding * = Not available on Gravity Roller Conveyors and do not use with high friction belts = Conveyor Belt idth Dim = in (mm) Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 35

29 2200 & 2300 eries: Modular Belt Profiles +.14 (4) 0.76 (19) 3.49 (89) (37) (37) 01 Low ide 04 3" (76) High ide +.14 (4) +.14 (4) 1.99 (51) 1.02 (26) (37) (37) " (38) High ide " (13) High ide =MAX (203) MIN. =MAX (203) MIN (149) 5.86 (149) 0.92 (23) (336) MAX (23) (336) MAX. 13 Adjustable Guiding 14 Tool-less Adjustable Guiding = Conveyor Belt idth Dim = in (mm) 36 Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.

30 2200 && 2300 eries: Insert tandard title(s) Belting here tandard Belt election Guide tandard belt material is stocked at Dorner, then cut and spliced at the factory for fast conveyor shipment. Belt Type - Finger plice Belt Type - Plastic Clipper Belt Type - Metal Clipper Belt pecifications Thickness urface Material Carcass Material Maximum Part Temperature Coefficient of Friction FDA Approved Anti-tatic tatic Conductive Chemical Resistance pecial Characteristics or Applications 01 A1 1A FDA Accumulation (1.7) Urethane Polyester 212 F (100 C) Low x x Good Packaging, clean room & inspection 02 A2 2A General Purpose (1.8) Urethane Polyester 212 F (100 C) Med x x Good Most versatile belt offering 03 A3 3A FDA High Friction (1.7) Urethane Polyester 212 F (100 C) High x x Good Packaging, clean room & inspection 05 A5 5A Accumulation (1.2) Urethane Polyester 212 F (100 C) V-Low x x Good Accumulation of products 06 A6 6A Electrically Conductive (1.6) Urethane Polyester 176 F (80 C) Low x x Good Electronics Handling 08 A8 8A High Friction (2.1) PVC Polyester 158 F (70 C) V-High x Poor Conveys up to 35 inclines* 09 idrive General Purpose (1.4) Urethane Polyester 212 F (100 C) High x Good Lower No Load Torque Dim = in (mm) Note: ee below for splice details. Plastic Clipper splice requires longer lead times. Note: Belts with V-guiding may have a slight high spot or rib on the top surface. This rib would run longitudinally along the center of the belt. Consult factory with applications for which this may cause interference. * Incline varies due to factors like dust, fluids and part material. BELT PLICING Finger plice All belts are available with a standard Thermoformed finger splice. This splice makes the belt continuous and is virtually undetectable. plice bonding methods vary by belt type. Consult factory for details. Plastic Clipper** An optional plastic clipper splice is available for quick removal of belts or when conveyors are installed in tight spaces. Metal Clipper** An optional metal clipper splice is also available for quick removal of belts or when conveyors are installed in tight spaces. ** ee belt charts for compatibility. Not for use with 2200/2300 eries Nose Bar Transfer or 2200/2300 eries with bottom wiper option. Plastic and Metal Clippers are slightly thicker than base belt. Contact factory for details. 37

31 2200 & 2300 eries: pecialty Belting pecialty Belt election Guide pecialty belt material is not stocked at Dorner and needs to be custom ordered for your special conveyor needs. Belt Type - Finger plice Belt Type - Plastic Clipper Belt Type - Metal Clipper Belt pecifications V-guided Belt Thickness urface Material Maximum Part Temperature Coefficient of Friction FDA Approved Chemical Resistance pecial Characteristics or Applications 19 Nose Bar, High Friction 0.02 (0.6) Urethane 212 F (100 C) High x Good Very mall Product Transfer 50 Heat Resistant 0.05 (1.3) ilicone 356 F (180 C) Low Good 53 Translucent & 0.02 (0.5) Urethane 212 F (100 C) V-Low x Good Back Lit inspection & Very mall Product Transfer Nose Bar, Accumulation 54 F4 4F FDA ealed Edge** x 0.06 (1.6) Urethane 176 F (80 C) Low x Good Packaging, clean room & inspection 55 F5 5F FDA ealed Edge** x 0.06 (1.6) Urethane 176 F (80 C) High x Good Packaging, clean room & inspection 56 6F Cut Resistant x 0.08 (2.1) Urethane 212 F (100 C) Med Good Oily product release, Metal stamping 57 7F Cut Resistant* x 0.10 (2.5) Nitrile 176 F (80 C) Med Poor Felt-like, dry metal stamping, glass & ceramic 58 8F Cut Resistant 0.06 (1.5) Urethane 176 F (80 C) Low V-Good Cross-linked surface, Gold colored 59 F9 9F Color Contrasting x 0.06 (1.5) PVC 158 F (70 C) Med Poor Black colored, hides overspray from ink jet 60 G0 0G Color Contrasting x 0.05 (1.3) Urethane 212 F (100 C) Low x Good Green colored 61 G1 1G Color Contrasting x 0.05 (1.3) Urethane 212 F (100 C) Low x Good Blue colored 63 3G Electrically Conductive x 0.05 (1.2) Urethane 176 F (80 C) Low Good tatic conductive, electronics handling 64 4G High Friction x 0.17 (4.4) PVC 194 F (90 C) V-High Poor Dark Green colored, rough top surface, product cushioning, incline / decline apps 66 6G Chemical Resistant x 0.07 (1.7) Polyester 212 F (100 C) Med x V-Good Good Cut resistance, metal stamping apps 67 7G Low Friction Cleated x 0.06 (1.6) Polyester 212 F (100 C) n/a x Good Excellent product release, consult factory for part number and how to specify low friction 68 G8 FDA Encased** x 0.06 (1.5) Urethane 176 F (80 C) Low x Good Urethane enclosed for added sanitary protection 69 G9 FDA Encased** x 0.09 (2.2) Urethane 212 F (100 C) Med x Good Urethane enclosed for added sanitary protection Dim = in (mm) Note: Plastic Clipper splice requires longer lead times. Note: Belts with V-guiding may have a slight high spot or rib on the top surface. This rib would run longitudinally along the center of the belt. Consult factory with applications for which this may cause interference. * 12 (305 mm) wide conveyor maximum for non V-guided ** Not available on 1.75 (44 mm) wide conveyors. 38

32 & 2300 & 2300 eries: eries: tandard Insert Belts title(s) & Cleats here 2200 & 2300 Modular Belt Modular Belt election Guide Belt Type Description Tooth Pitch Thickness Material Color Maximum Part Temperature Coefficient of Friction FDA Approved Chemical Resistance 01 Accumulation, Closed Mesh 0.33 (8.4) (6) Acetal Blue 200 F (93 C) Low x Good Note: hite belt is available, contact factory for details. Dim = in (mm) 2200 Precision Move tandard Belts & cleats tandard Belt election Guide tandard belt material is stocked at Dorner,then cut and spliced at the factory for fast conveyor shipment. Belt Type - Finger plice Belt pecifications Tooth Pitch Thickness Material Top urface Color Maximum Part Temperature Coefficient of Friction Durometer FDA Approved Chemical Resistance Max idth 1P Low Friction 10 mm (4.5) Urethane with nylon top Carcass Green 195 F (91 C) Low N/A Good 24 (610) 3P High Friction 10 mm (4.5) Urethane mooth hite 195 F (91 C) High 85A x Good 24 (610) 2T High trength 10 mm (4.6) Urethane with tainless cords mooth Clear 160 F (71 C) Med 92A Good 6 (152) Dim = in (mm) 2.05 (52) 1.42 (36) 0.79 (20) 0.16 (4) A B C Base Belt Material: Belt 3P, 0.175" (4.5 mm) think, high friction FDA approved urethane, 195 F (91 C) maximum part temperature. Cleat spacing in 10 mm increments. Cleats located centered over tooth. Note: Minimum cleat spacing is approximately 1.57 (40 mm). Consult Factory. tandard Cleats.059 typ. (1.5) 1.00 (25) 1.57 (40) 2.36 (60).24 (6).43 (11).97 (25) (40) (59) 10 A*.35 typ. (9) B* C* F** G** H* V* J* * Maximum 20 (508 mm) cleat spacing for 18 and wider conveyors with lengths greater than 7 (2,134 mm) ** 18 and wider conveyors have a maximum length of 7 (2,134 mm) Base Belt Material: 0.059" (1.5 mm) thick, high friction FDA approved urethane, 176 F (80 C) maximum part temperature. ee pecialty Belt 67 for low friction base belt material. Note: Minimum cleat spacing is approximately 2 (51 mm). Consult Factory. 39

33 2200 & 2300 eries: Gearmotor Mounting Packages Gearmotor Mounting Package & Gearmotor election teps tep 1: tep 2: tep 3: tep 4: tep 5: elect a Gearmotor Mounting Package. For End drive conveyors, select a side, bottom, top, flush or bolster drive mount (pages 41-49). If a Center Drive or Mid Drive conveyor is being outfitted, refer to the Center Drive section on pages Be sure to note if it is for a 90 or Parallel haft Gearmotor. Using Belt peed and Load Requirements, determine the required Gearmotor Type (Light, Heavy or tandard) for your application using the chart below. Find the appropriate set of Belt peed Charts (pages 43, 44, 46, 47, 49, 51 and 52) for the Mounting Package you selected and choose between the Fixed or Variable peed chart. Go down the first column of the Belt peed Chart and locate the required Belt peed for your application. If the desired belt speed is not listed, round up to the next higher speed. (Dorner offers much more than just the belt speeds listed in the tables, contact the factory for complete details) From the row containing your required Belt peed, check to be sure that speed is available for the Mount Package you chose. (End Drive Only - Top, Bottom or ide) tep 6: tep 7: tep 8: Use the Drive / Driven Pulley Kit combination to complete your Mounting Package Part Number Note the RPM from Gearmotor, it will be needed to select the correct Gearmotor from the Gearmotor Chart. Reference the Gearmotor Chart # to locate a compatible Gearmotor Chart on pages Be sure to select a Gearmotor Chart to match your Gearmotor Type (Light, tandard or Heavy) and your Mounting Package while meeting your electrical requirements. (Red = Parallel haft or Blue = 90 ) tep 9: Using the RPM from Gearmotor (tep 6), locate the Part Number for your Gearmotor from the Gearmotor Table. Belt peed - Ft/min (m/min) GEARMOTOR TYPE Light Load tandard Load Heavy Load 0-15 (0-4.6) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Conveyor Load - Lbs (Kg) 10 (4.5) 20 (9.1) 30 (13.6) 40 (18.2) 50 (22.7) 60 (27.3) 70 (31.8) 80 (36.4) 90 (40.9) 100 (45.5) 110 (50) 120 (54.5) Gearmotor Mounting Package election Guide Use this guide as a reference when selecting Gearmotor Mounting Packages et Products / Environments 3 (76) and taller products Manual / Automated Assembly APPLICATION Table top mounting Tight machine interface Aesthetics Driving multiple conveyors Clearance at discharge Operator Ergonomics Test and Inspect Metal Forming ide Mount Package X X X X 40 MOUNT PACKAGE Top Mount Package X X X Bottom Mount Package X X X X X Center Drive Conveyor X X X Flush Mount X X Bolster Mount Package X X Common Drive Package X

34 2200 & 2300 eries: End Drive Mounting Packages ide Mount Package, 90 Gearmotor 4.97 (126) 0.58 (15) 0.86 (22) Includes gearmotor mounting bracket, coupling, coupling guard and mounting hardware = Conveyor Belt idth Bottom Mount Package, 90 Gearmotor 2.34 (59) 9.19 (233) A 4.27 (108) Includes gearmotor mounting bracket, timing belt and pulleys, guard cover and mounting hardware 4.58 (116) A: tandard Load Flat Belt = 5.33 (135) tandard Load Cleated Belt = 7.70 (195) = Conveyor Belt idth Top Mount Package, 90 Gearmotor 4.27 (108) 2.00 (51) 9.19 (233) 6.50 (165) 1.81 (46) 4.58 (116) Includes gearmotor mounting bracket, timing belt and pulleys, guard cover and mounting hardware = Conveyor Belt idth 90 tandard Load Gearmotor Location Options ide Mount Bottom Mount Top Mount Notes: Position 1 recommended Vertical positions 2 and 4 may require additional stabilizing bracket Consult factory for details Note: Conveyor and gearmotor are not included in the mounting package and must be ordered separately. Dimensions = in (mm) For ordering information, see page 79 41

35 2200 & 2300 eries: End Drive Mounting Packages ide Mount Package, Parallel haft Gearmotor 2.1 (52) 3.2 (81) A w 1.7 (44) 6.1 (155) 3.2 (81) 0.6 (15) Light load gearmotors only A: Light Load, Fixed peed and VFD Variable peed = 4.6 (117) Light Load, DC Variable = 6.7 (170) Light Load CE Fixed peed = 7.2 (183) Includes gearmotor mounting bracket, coupling, coupling guard and mounting hardware = Conveyor Belt idth Bottom Mount Package, Parallel haft Gearmotor 2.3 (59) w 0.6 (16) A 3.7 (94) B 6.4 (163) d 2.6 (67) C 0.6 (16) A: Light Load Flat Belt = 6.9 (175) Light Load Cleated Belt = 8.9 (226) tandard Load Flat Belt = 9.2 (234) tandard Load Cleated Belt = 9.2 (234) B: Light Load Flat Belt = 6.2 (158) Light Load Cleated Belt = 8.3 (211) tandard Load Flat Belt = 8.5 (216) tandard Load Cleated Belt = 10.3 (262) C: Light Load, Fixed peed and VFD Variable peed = 4.6 (117) Light Load, DC Variable peed = 6.7 (170) tandard Load = 10.5 (267) D: Light Load Flat Belt = 6.1 (155) Light Load Cleated Belt = 5.6 (142) tandard Load Flat Belt = 4.6 (116) tandard Load Cleated Belt = 4.6 (116) Includes gearmotor mounting bracket, timing belt and pulleys, guard cover and mounting hardware = Conveyor Belt idth Top Mount Package, Parallel haft Gearmotor 2.6 (67) C A 2.3 (59) w 1.8 (46) B 6.1 (155) d 0.6 (16) A: Light Load = 8.9 (226) tandard Load = 9.2 (234) B: Light Load = 3.3 (84) tandard Load = 4.3 (110) C: Light Load, Fixed peed and VFD Variable peed = 4.6 (117) Light Load, DC Variable peed = 6.7 (170) tandard Load = 10.5 (267) D: Light Load = 5.6 (142) tandard Load = 4.6 (116) Includes gearmotor mounting bracket, timing belt and pulleys, guard cover and mounting hardware = Conveyor Belt idth Note: Conveyor and gearmotor are not included in the mounting package and must be ordered separately. Dimensions = in (mm) 42 For ordering information, see page 79

36 2200 & 2300 eries: End Drive Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Fixed peed 2200 / Precision Move 2200 / 2300 Modular Belt Ft/min m/min Ft/min m/min Ft/min m/min RPM From Gearmotor Mount Package Pulley Kit Gearmotor Chart # Top & Bottom x x x ide Drive Pulley Driven Pulley Light Load td. Load x , x x , 5 12, x x x x x , 19 12, x , 5 12, x x , x x x , 5 12, x x x , 5 12, x x x , 5 12, x , 5 12, x , 5 12, x x , 5 12, x , 5 12, x , 5 12, x , 5 12, x , 5 12, x , 5 12, 13 Gearmotor RPM at 50 Hz * x * x x * x x * x * x * x x * x * x x * x x * x * x x * x * x * x * x * x * x Heavy Load Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 43

37 2200 & 2300 eries: End Drive Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Variable peed 2200 / Precision Move 2200 / 2300 Modular Belt Ft/min m/min Ft/min m/min Ft/min m/min RPM From Gearmotor Mount Package Pulley Kit Gearmotor Chart # Top & Bottom x x ide Drive Pulley Driven Pulley Light Load td. Load x , x , 11 15, x x , 10, x , x x x x x , 11 15, x x , 10, x x x , 11 15, x x x , x , 11 15, x , 11 15, x , x x , x , 11 15, x , RPM from CE/50 Hz gearmotors VFD drive at 63 Max. Hz. output * x * x x * x x * x x * x x * x * x x * x * x Heavy Load Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 44

38 2200 & 2300 eries: Flush Bottom Mounting Packages Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Flush Bottom Mount Package, Parallel haft Gearmotor tandard Load Light Load 9.1 (232) 2.6 (67) 2.0 (51) 0.3 (9) w A 6.3 (161) 4.8 (122) A: flat Belt = 3.9 (98) Cleated Belt = 5.7 (145) 0.5 (13) 9.1 (232) 2.0 (51) 0.3 (9) w 5.5 (138) (161) (237) 4.8 (123) 0.5 (13) Flush Bottom Mount Package, 90 Gearmotor tandard Load 2.21 (56) Heavy Load 2.21 (56) 9.13 (232) A 4.81 (122) (232) (224) (281) 4.81 (122) 4.14 (105) A: FLAT BELT = 5.98 (152) CLEATED BELT = 8.41 (214) 4.06 (103) Product Applications/Uses: ide product transfers Product stops/escapements Product detection Lift stations heet handling 45

39 2200 & 2300 eries: Flush Bottom Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Fixed peed 2200 / Precision Move 2200 / 2300 Modular Belt RPM From Pulley Kit Gearmotor Chart # Ft/min m/min Ft/min m/min Ft/min m/min Gearmotor Drive Pulley Driven Pulley Light Load tandard Load Heavy Load , 5 12, , 5 12, , 19 12, , 5 12, , 5 12, , 5 12, , 5 12, 13 Gearmotor RPM at 50 Hz Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 46

40 2200 & 2300 eries: Flush Bottom Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Variable peed 2200 / Precision Move 2200 / 2300 Modular Belt RPM From Pulley Kit Gearmotor Chart # Ft/min m/min Ft/min m/min Ft/min m/min Gearmotor Drive Pulley Driven Pulley Light Load tandard Load Heavy Load , 11 15, , , , 20 15, , 11 15, , , 11 15, , 11 15, , Gearmotor RPM at 50 Hz Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 47

41 2200 & 2300 eries: Gang Drive & Bolster Mount Mounting Packages 1.50 (38) (352) 3.63 (92) MIN (33) 1.25 (32) (1270) MAX. Includes motor mounting bracket, 4 (1219 mm) hex shaft, coupling, shaft guard, support block and support block bracket. Notes: Conveyors cannot be secured to bolster plate on stands Order conveyor with gang drive option separately Order gearmotor separately (90 tandard and Heavy Load only) Positions 2 and 3 recommended Note: Dimensions = in (mm) REMINDER: Gang Drive Pulleys require periodic greasing 2200 ERIE: BOLTER MOUNT MOUNTING PACKAGE 63 M 01 E Motor Type:, H, K Output haft: 01 = ingle Documentation Language: M = English, U = CE English Example: 63M01 Description: Gang drive mounting package with English documentation. 48 Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.

42 2200 & 2300 eries: Gang Drive & BOLTER MOUNT Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts BOLTER MOUNT BELT PEED CHART Fixed peed Belt peed RPM From Gearmotor Chart # Ft/min m/min Gearmotor tandard Load Heavy Load , 5 12, , , 5 12, , 5 12, , 5 12, 13 Gearmotor RPM at 50 Hz Variable peed Belt peed RPM From Gearmotor Chart # Ft/min m/min Gearmotor tandard Load Heavy Load , , , , Gearmotor RPM at 50 Hz Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 Gang mid Drive Belt peed Charts Refer to page 32 for mount package details. Fixed peed 2200 Precision Move RPM From Gearmotor Chart Ft/min m/min Gearmotor tandard Load Heavy Load Gearmotor RPM at 50 Hz Variable peed Belt peed RPM From Gearmotor Chart Ft/min m/min Gearmotor tandard Load Heavy Load RPM from CE/50 Hz gearmotors VFD drive at 63 Max. Hz. output Red = Parallel haft, Blue = 90 49

43 2200 & 2300 eries: Center & Mid Drive Mounting Packages Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Center Drive mounting packages Parallel haft Gearmotor TYPE 1 - Vertical Mount Parallel haft Gearmotor TYPE 2 - Horizontal Mount 0.8 (21) 0.8 (21) 2.2 (55) 2.2 (55) 2.2 (55) 5.7 (145) 5.7 (145) (197) (197) 10.2 (260) 10.2 (260) 0.8 (20) 4.1 (103) 2.3 (57) 2.3 (57) 2.3 (57) 90 Gearmotor 2.2 (55) (57) 2.41 (61) (21) 90 Gearmotor 2.2 (55) C 1 1 B (53) (5) 5.5 (139) 2.69 (68) 7.7 (197) 7.75 (197) A A A: tandard Load = 12.1 (308) Heavy Load = 12.6 (321) B: tandard Load = 14.3 (362) Heavy B Load = 15.4 (391) C: tandard Load = 7.6 (192) A: TANDARD Heavy Load LOAD = 8.1 = (206) 9.96 (253) HEAVY LOAD = (263) B: TANDARD LOAD = 2.95 (75) HEAVY LOAD = 3.87 (98) C 2.50 (64) 1.88 (48) B (147) (53) 2.25 (57) B 3 A 4.1 (103) A A: tandard Load = 7.2 (183) Heavy Load = 7.7 (196) B: tandard Load = 14.6 (370) A: TANDARD Heavy Load LOAD = 15.7 = 5.09 (399)(129) HEAVY LOAD = 5.49 (139) C: tandard Load = 2.6 (67) B: TANDARD Heavy Load LOAD = 3.2 = (80) 2.95 (75) HEAVY LOAD = 3.87 (98) TYPE 2 recommended for tight spaces and allows for easy access to the drive module. * Gearmotor not included in mounting package, see page 40 for gearmotor ordering information. Dimensions = in (mm) For ordering information, see page Precision Move Mid Drive Parallel haft Gearmotor 90 Gearmotor 2.30 (58) 2.30 (58) A 1.77 (45) 4.06 (103) 2.25 (57) D C B 4.06 (103) A: TANDARD LOAD = 7.32 (186) HEAVY LOAD = 8.40 (213) B: TANDARD LOAD = 7.50 (190) HEAVY LOAD = 8.01 (203) C: TANDARD LOAD = (419) HEAVY LOAD = (450) D: TANDARD LOAD = 2.31 (59) HEAVY LOAD = 3.39 (86) 50 For ordering information, see page 80

44 2200 & 2300 eries: Center & Mid Drive Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Fixed peed 2200 / Precision Move 2200 / 2300 Modular Belt RPM From Pulley Kit Gearmotor Chart # Ft/min m/min Ft/min m/min Ft/min m/min Gearmotor Drive Pulley Driven Pulley tandard Load Heavy Load , , 5 11, , 19 11, , , 5 11, , 5 11, , 5 11, , 5 11, , 5 11, , 5 11, , 5 11, , 5 11, 12 Gearmotor RPM at 50 Hz Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 51

45 2200 & 2300 eries: Center & Mid Drive Belt peed Charts Refer to the Gearmotor election teps on page 40 for instructions on using the Belt peed Charts. Variable peed 2200 / Precision Move 2200 / 2300 Modular Belt RPM From Pulley Kit Gearmotor Chart # Ft/min m/min Ft/min m/min Ft/min m/min Gearmotor Drive Pulley Driven Pulley tandard Load Heavy Load , , , 11 15, , , 20 15, , 11 15, , , 11 15, , , 11 15, , 11 15, , , , 11 15, , , 11 15, , RPM from 50 Hz. gearmotors, VFD drive at 63 max. Hz. output Note: Nose Bar transfers operate at maximum 77 ft/min (23.5 m/min) belt speed Red = Parallel haft, Blue = 90 52

46 2200 & 2300 eries: Gearmotors Light Load, Fixed peed Chart 1 Parallel haft ealed gearmotor Totally enclosed, non-ventilated Includes switch, cord and overload protection on 1 Phase unit 115V, 1 Phase 230V, 3 Phase Non-reversing 60 Hz 5.7 (145) 3.2 (80) 4.1 (105) 2.9 (75) 1.0 (25) 8.0 (202) 5.0 (126) 3.2 (80) 1.3 (32) 5.0 (128) Part Number RPM Gearmotor Type Hp k 62M036PL4(vp)F(N) 62M015PL4(vp)F(N) L L Phase 3 Phase tarter FLA in.-lbs. Nm FLA in.-lbs. Nm Chart H H (vp) = Voltage and Phase 11 = 115V, 1 phase 23 = 230V, 3 phase (n) = Reversing capability N = No reversing switch R = ith reversing switch Chart 2 Parallel haft Totally enclosed, fan cooled IP44 protection rating Non-reversing 50 Hz Order starter separately, see page (133) 2.5 (63) 12 mm Ø 8.8 (224) 1.0 (25) 3.2 (80) Part Number RPM Gearmotor Type 1Ph k 1 Ph FLA 3Ph k 3 Ph FLA Nm 3 Phase tarter Chart 62Z028PL421FN 62Z028PL4(vp)FN 62Z008PL421FN 62Z008PL4(vp)FN L L L L n/a n/a 0.31 n/a 0.31 n/a n/a n/a n/a 0.22 / 0.13 n/a 0.22 / H H H H (vp) = Voltage and Phase 23 = 230V, 3 phase 43 = 400V, 3 phase Note: hen buying a gearmotor only without the starter, the customer must supply their own on/off switch and motor overload protection to comply with the CE afety Directive. FLA = Full Load Amperes ome motors and gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures. Note: Dimensions = in (mm) 53

47 2200 & 2300 eries: GearmotoRs Light Load, Variable peed Chart 3 Parallel haft 130 Volts DC ealed gearmotor Totally enclosed, non-ventilated RPM motor Order controller separately, see page (43) 3.4 (86) 3.4 (86) 1.0 (25).5 Ø 9.4 (238) 1.6 (40) 2.9 (73) 2.4 (61) Part Number RPM Gearmotor Type Hp k FLA in.-lbs. Nm 62M060PLD3DEN 62M018PLD3DEN V V Vari - peed Control Chart A A Chart 18 Parallel haft 4.1 (105) 2.9 (75) 8.0 (202) 5.0 (126) VFD Variable peed 230V, 3 Phase, 10 to 60 Hz Totally enclosed, non-ventilated Order controller separately, see page (145) 3.2 (80) 1.0 (25) 3.2 (80) 1.3 (32) 5.0 (128) Part Number RPM Gearmotor Type Hp k FLA in.-lbs. Nm 62M036PL423EN 62M015PL423EN L L Vari - peed Control Chart E E tandard Load, Fixed peed Chart 4 90 ealed gearmotor NEMA 42 CZ C Face Totally enclosed, fan cooled 115V 1 phase includes switch, cord and overload protection /460 Volts, 3 phase wiring by others 60 Hz Order 3 phase starter separately, see page (163) 2.76 (70) 1.24 (32) 5.12 (130) 4.21 (107) 1.57 (40) 3.82 (97) 1.57 (40) (311) 6.50 (165) 4.73 (120) Part Number RPM Gearmotor Type 1 Phase 3 Phase Hp k FLA Hp k FLA in.-lbs. Nm 3 Phase tarter Chart 32M060EL4(vp)FN 32M040EL4(vp)FN 32M020EL4(vp)FN 32M010EL4(vp)FN 32M005EL4(vp)FN / / / / / L L L L L (vp) = Voltage and Phase 11 = 115V, 1 phase 23 = / 460V, 3 phase 54 FLA = Full Load Amperes ome motors and gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures. Note: Dimensions = in (mm)

48 2200 & 2300 eries: Gearmotors tandard Load, Fixed peed Chart 5 Parallel haft ealed gearmotor Totally enclosed, fan cooled 115V 1 phase includes switch, cord and overload protection 230/460 Volts, 3 phase wiring by others 60 Hz Order 3 phase starter separately, see page (38) 4.75 (121) 2.39 (61) 2.04 (52) 6.73 (171) 2.62 (67).75 Ø 2.00 (51) (281) 4.75 (121) Part Number 62M180P4(vp)F(n) 62M060P4(vp)F(n) 62M030P4(vp)F(n) 62M020P4(vp)F(n) 62M010P4(vp)F(n) 62M005P4(vp)F(n) RPM Gearmotor Type 1 Phase 3 Phase Hp k FLA in.-lbs. Hp k FLA in.-lbs (vp) = Voltage and Phase 11 = 115V, 1 phase 23 = 230/460V, 3 phase (n) = Reversing Capability N = No reversing switch R = ith reversing switch (115V, 1 phase only) Chart / / / / / / Nm Phase tarter Chart L L M M M M ealed gearmotor IEC 63 B5 C Face IP 55 protection rating Totally enclosed, fan cooled Non-reversing 50 Hz Order starter separately, see page (310) 4.72 (120) 6.30 (160) 2.76 (70) 4.88 (124) 4.78 (121) 3.54 (90) 1.54 (39) 5.39 (137) 1.97 (50) 1.97 (50) Part Number RPM Gearmotor Type 1Ph k 1 Ph FLA 3 Ph k 3 Ph FLA Nm tarter Chart 62Z060E4(vp)FN 62Z040E4(vp)FN 62Z020E4(vp)FN 62Z010E4(vp)FN 62Z005E4(vp)FN (vp) = Voltage and Phase 21 = 230V, 1 phase 23 = 230V, 3 phase 43 = 400V, 3 phase FLA = Full Load Amperes / / / / / Note: hen buying a gearmotor only without the starter, the customer must supply their own on/off switch and motor overload protection to comply with the CE afety Directive. ome motors and gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures. Note: Dimensions = in (mm) I I I I I 55

49 2200 & 2300 eries: GearmotoRs tandard Load, Fixed peed Chart E A20 Gearmotor Bottom, Center and ide mount packages available 230 / 460 V 3 Phase VFD Compatible with constant torque from 10 to 60 Hz ealed gear head, totally enclosed fan cooled motor 7.48 (190) 5.63 (143) 4.57 (116) 1.87 (47) (310) 4.39 (112) 1.97 (50) 2.65 (67) 5.52 (140) 4.61 (117) 0.91 (23) Part Number RPM Gearmotor Type Hp k FLA in-lbs Nm 3 Phase tarter Chart 22M039423EN 22M017423EN 22M008423EN / / / L L M tandard Load, Variable peed Chart Volts DC ealed gearmotor NEMA 42 CZ C Face Totally enclosed, fan cooled RPM motor Order controller separately, see page (137) 2.76 (70) 1.24 (31) 4.21 (107) 3.82 (97) 1.57 (40) 1.57 (40) (336) 5.25 (133) Part Number RPM Gearmotor Type Hp k FLA in.-lbs. Nm 22M060ED3DEN 22M040ED3DEN 22M020ED3DEN 22M010ED3DEN 22M005ED3DEN Vari-peed Control Chart A A A A A Chart 8 90 Variable frequency drive, 6-60 Hz ealed gearmotor NEMA 56C C Face Totally enclosed, fan cooled 230/460 Volts, 3 phase Order controller separately, see pages 60 & (342) 6.01 (153) 3.70 (94) 3.70 (94) 5.12 (130) 8.07 (205) 6.79 (173) 5.39 (137) 3.54 (90) 4.78 (121) 1.40 (36) 1.97 (50) 1.97 (50) Part Number RPM Gearmotor Type Hp k FLA in.-lbs. Nm* 32M060EL423EN 32M040EL423EN 32M020EL423EN 32M010EL423EN 32M005EL423EN K K K K K 0.5** 0.5** 0.5** 0.5** 0.5** * = At 60 Hz ** = Motor de-rated to 0.25 Hp for full torque throughout speed range / / / / / Vari-peed Control Chart D and E D and E D and E D and E D and E 56 FLA = Full Load Amperes ome motors and gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures. Note: Dimensions = in (mm)

50 2200 & 2300 eries: Gearmotors tandard Load, Variable peed Chart 9 90 Variable frequency drive, Hz ealed gearmotor IEC 63 B5 C Face IP 55 protection rating Totally enclosed, fan cooled 230/400 Volts, 3 phase Order controller separately, see page (310) 4.72 (120) 6.30 (160) 2.76 (70) 4.88 (124) 4.78 (121) 3.54 (90) 1.54 (39) 1.97 (50) 1.97 (50) 5.39 (137) Part Number RPM Gearmotor Type 3 Ph k 3 Ph FLA Nm* 62Z060E423EN 62Z040E423EN 62Z020E423EN 62Z010E423EN 62Z005E423EN / / / / / Vari-peed Control Chart B B B B B * = At 50 Hz Note: hen buying a gearmotor only without the starter, the customer must supply their own on/off switch and motor overload protection to comply with the CE afety Directive. Chart 10 Parallel haft 130 Volts DC ealed gearmotor Totally enclosed, non-ventilated RPM motor Order controller separately, see page (62) 4.9 (124) 1.5 (37) 4.8 (121).75 Ø 12.5 (318) 2.0 (51) 4.3 (108) Part Number RPM Gearmotor Type Hp k FLA in.-lbs. Nm Vari - peed Control Chart 62M180PD3DEN 62M060PD3DEN 62M030PD3DEN 62M020PD3DEN 62M010PD3DEN 62M005PD3DEN A A A A A A Chart 11 Parallel haft Variable frequency drive, 10 to 60 Hz ealed gearmotor Totally enclosed, fan cooled 230/460 Volts / 3 Phase, VFD duty Order controller separately, see pages 60 & (38) 4.75 (121) 2.39 (61) 2.04 (52) 6.73 (171) 2.62 (67).75 Ø 2.00 (51) (281) 4.75 (121) Part Number RPM* Gearmotor Type Hp k FLA in.-lbs. Nm Vari - peed Control Chart 62M180P423EN 62M060P423EN 62M030P423EN 62M020P423EN 62M010P423EN 62M005P423EN * = At 60 Hz FLA = Full Load Amperes / / / / / / D and E D and E D and E D and E D and E D and E ome motors and gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures. Note: Dimensions = in (mm) 57

51 2200 & 2300 eries: Gearmotors tandard Load, Variable peed Chart E A20 Gearmotor Bottom, Center and ide mount packages available 230 / 460 V 3 Phase VFD Compatible with constant torque from 10 to 60 Hz ealed gear head, totally enclosed fan cooled motor 7.48 (190) 5.63 (143) 4.57 (116) 1.87 (47) (310) 4.39 (112) 1.97 (50) 2.65 (67) 5.52 (140) 4.61 (117) 0.91 (23) Part Number RPM Gearmotor Type Hp k FLA in-lbs Nm Vari - peed Control Chart 22M039423EN 22M017423EN 22M008423EN / / / D and E D and E D and E Heavy Load, Fixed peed Chart ealed gearmotor NEMA 56 C Face Totally enclosed, fan cooled 115V 1 phase includes switch, cord and overload protection /460 Volts, 3 phase wiring by others 60 Hz Order 3 phase starter separately, see page (346) 5.44 (138) 5.12 (130) 6.79 (173) 2.17 (55) 2.63 (67) 5.89 (150) 4.78 (121) 2.46 (62) 2.23 (57) 3.54 (90) 1.54 (39) 6.56 (167) 1.97 (50) 1.97 (50) Part Number RPM Gearmotor Type 1 Phase 3 Phase Hp k FLA Hp k FLA in.-lbs. Nm 3 Phase tarter Chart 32M060E4(vp)FN 32M040E4(vp)FN 32M020E4(vp)FN 32M010E4(vp)FN 32M005E4(vp)FN H H H H H / / / / / M M M M M (vp) = Voltage and Phase 11 = 115V, 1 phase 23 = / 460V, 3 phase FLA = Full Load Amperes ome motors and gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures. Note: Dimensions = in (mm) 58

52 2200 & 2300 eries: Gearmotors Heavy Load, Variable peed Chart V DC ealed gearmotor NEMA 56 C Face Totally enclosed, fan cooled RPM motor Order controller separately, see page (174) 3.54 (90) 1.54 (39) 5.92 (150) 2.75 (70) 2.17 (55) 5.12 (130) 4.78 (121) 1.97 (50) 1.97 (50) (377) 6.20 (157) Part Number RPM Gearmotor Type Hp k FLA in.-lbs. Nm 32M060ED9DEN 32M040ED9DEN 32M020ED9DEN 62M010EHD9DEN 62M005EHD9DEN H H H H H Vari - peed Control Chart C C C C C Chart Variable frequency drive, 6-60 Hz ealed gearmotor NEMA 56 C Face Totally enclosed, fan cooled 230/460 Volts, 3 Phase Order controller separately, see pages 60 & (116) 6.79 (173) 3.54 (90) 1.54 (39) 8.92 (227) 5.12 (130) 4.78 (121) 1.97 (50) (378) 4.13 (105) 1.97 (50) 6.00 (152) Part Number RPM* Gearmotor Type 3 Ph Hp 3 Ph k 3 Ph FLA in.-lbs.* Nm* 32M060E423EN 32M040E423EN 32M020E423EN 32M010E423EN 32M005E423EN H H H H H 0.75** 0.75** 0.75** 0.75** 0.75** / / / / / Vari - peed Control Chart D and E D and E D and E D and E D and E * = At 60 Hz ** = Motor derated to 0.5 hp (2.2 / 1.1 amp) for full torque throughout speed range FLA = Full Load Amperes Note: Dimensions = in (mm) 59

53 2200 & 2300 eries: Variable peed Controllers Variable peed Controllers Chart A PM DC control Nema 1 enclosure Line cord and motor cord On/Off switch for 62MD1134 Forward/Off/Reverse switch for 62MD1134R peed potentiometer Mounting hardware * = ee FLA from motor charts Part Number Input Volts Input Phase Input Hz Output Volts Max Amps* Reversing 62MD MD1134R (181) 5.3 (133) 62md (114) 4.6 (116) 3.9 (100) 130VDC 130VDC 7.1 (180) 5.3 (135) md1134r 5.8 (147) 5.7 (145) No Yes 5.0 (127) Chart B 6.3 (160) 5.9 (150) 4.5** (114) VFD control IP 65 enclosure EMC filter Mounting hardware Variable speed Motor cord only on 460V Line cord and motor cord 8.0 (203) 10.5 (268) Part Number Input Volts Input Phase Input Hz Output Volts Output Phase Max Kw* Max Amps Reversing 62UV UV4341 Chart C PM DC control NEMA 1 enclosure Line cord and motor cord On/Off switch for 62MD1192 & 62MD1193 Forward/Off/Reverse switch for 62MD1192R & 62MD1193R peed potentiometer Mounting hardware Yes Yes * = ee FLA from motor charts Part Number Input Volts Input Phase Input Hz Output Volts Max Amps* Reversing 62MD MD1192R 62MD MD1193R MD1192 & 62MD1192R 7.1 (180) 5.3 (135) (147) 5.7 (145) 90VDC 90VDC 90VDC 90VDC 5.0 (127) 5.5 (140) 62MD1193 & 62MD1193R (210) 4.1 (105) 10.0 (254) No Yes No Yes Chart D Full feature VFD control NEMA 4 enclosure Digital display Keypad with tart/top, Forward/Reverse and speed variations Includes cord to motor Power to controller by others 32MV1122 includes line cord to controller Mounting hardware 8.0 (203) 6.3 (160) 5.9 (150) 4.5** (114) 10.5 (268) * = ee FLA from motor charts ** For VFD 32MV2127 and 32MV2327 the width dimension is 6.4 (163). Part Number Input Volts Input Phase Input Hz Output Volts Output Phase Max Hp Output Amps* Reversing 32MV MV MV MV MV2127** 32MV MV2327** 32MV MV Yes Yes Yes Yes Yes Yes Yes Yes Yes 60 Note: Dimensions = in (mm)

54 2200 & 2300 eries: Manual Motor tarters Variable peed Controllers Chart E VFD control Nema 1 enclosure Line cord and motor cord On/Off switch peed potentiometer Mounting hardware Forward/Reverse switch 7.1 (180) 5.3 (135) 5.8 (147) 5.7 (145) 5.0 (127) Part Number Input Volts Input Phase Input Hz Output Volts Output Phase Max Hp Max Amps* Reversing 62MV1122B 62MV1122BR No Yes Manual Motor tarters Manual motor starts are manual electronic disconnects that provide motor overload protection and are required by the National Electric Code (NEC) for safe motor operation. Illustration A Illustration B IP 55 Enclosure Push button tart / top Includes mounting hardware 7.0 (178) 3.4 (86) 3.7 (94) 7.0 (178) 3.4 (86) 3.7 (94) Chart H Chart I 230V, 1 phase includes cord, plug & starter 230/400 Volts, 3 phase wiring to starter by others iring between motor and starter provided when ordered together 50 Hz Part Number In Volts In Phase Amp Range Illustration 62(c)M21H 62(c)M23H 62(c)M43H A B B 230V, 1 phase includes cord, plug and starter 230/400 Volts, 3 phase wiring to starter by others iring between motor and starter provided when ordered together 50 Hz Part Number In Volts In Phase Amp Range Illustration 62(c)M21T 62(c)M23T 62(c)M43T A B B Note: hen buying a gearmotor only without the starter, the customer must supply their own (c) = Electrical Configuration G = CE German on/off switch and motor overload protection to comply with NEC and CE safety directive. F = CE French U = CE Great Britain Chart L 230/460 Volts, 3 phase wiring to starter by others iring between motor and starter provided when ordered together 60 Hz Part Number In Volts In Phase Amp Range Illustration 62MM23L 62MM43L 62MM23H B B B Chart M 230/460 Volts, 3 phase wiring to starter by others iring between motor and starter provided when ordered together 60 Hz Part Number In Volts In Phase Amp Range Illustration 62MM23M 62MM43M B B Note: Dimensions = in (mm) 61

55 2200 & 2300 eries: upport tands Quantity Charts 2200 eries upport tands Conveyor Length # of upports 2 (610) - 4 (1,219) 1* 2 (610) - 6 (1,829) 2 7 (2,134) - 12 (3,658) 3 13 (3,962) - 18 (5,486) 4 19 (5,791) - 24 (7,315) eries upport tands Conveyor Length # of upports 2 (610) - 8 (2,438) 2 9 (2,743) - 16 (4,877) 3 17 (5,182) - 24 (7,315) 4 Required Return Roller Quantity Chart Max feet between return rollers Conveyor idth Flat Belt Cleated Belt Quantity of return rollers required = whole number result of: Example Description: 2200 flat belt 8 wide x 14 long conveyor length in feet max distance between return rollers = return rollers required * End Drive Conveyors with ingle-post upport tands only. Requires the use of diagonal bracing, see page 63. Heavy load gearmotors require a minimum of two stands to support conveyor and gearmotor package. Mounting Brackets Cleated Belt tand Mounting Bracket 3.00 (76) Flat Belt tand Mounting Bracket 3.00 (76) 3.04 (77) 3.04 (77) w -.16 (4) 2.25 (57) w = Conveyor Belt width w -.16 (4) 2.25 (57) Part Number Description tand Mounting Bracket, 2200 eries Cleated Belt Conveyor tand Mounting Bracket, 2300 eries Cleated Belt Conveyor Part Number Description tand Mounting Bracket, 2200 eries Flat Belt Conveyor tand Mounting Bracket, 2300 eries Flat Belt Conveyor Return Rollers Note: Conveyors can be ordered with the required number of mounting brackets. If desired, order additional mounting brackets separately. Cleated Belt Return Roller 2.25 (57) Flat Belt Return Roller for 2 to 6 ide Conveyors 1.25 (32) w+.96 (24).78 (20).75 (19) w+.96 (24).78 (20).75 (19) Part Number Description Return Roller for 2200 & 2300 eries, Cleated Belt Flat Belt Return Roller for 8 to 48 ide Conveyors Part Number Description Return Roller for 2200 & 2300 eries 2 (44 mm) to 6 (152 mm) wide Flat Belt Conveyor 1.25 (32) w+.96 (24).78 (20).75 (19) = Conveyor idth Reference Note: Conveyors can be ordered with the required number of mounting brackets. If desired, order additional mounting brackets separately. Part Number 3249 Description Return Roller for 2200 & 2300 eries 8 (203 mm) to 48 (1,219 mm) wide Flat Belt Conveyor Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user. Note: Dimensions = in (mm) 62

56 2200 & 2300 eries: upport tands tand Accessories Adjustable Tie Bracket 1.5 (38) 0.8 (20) 1.9 (48) 1.0 (25) 1.3 (33) L (48).28 (7) Diameter 1.3 (33).25 (6) Diameter x.75 (19) Long slotted hole L 1.0 (25) 0.9 (23) Dim = in (mm) Compatible with steel and aluminum support stands ecure critical stand and conveyor locations Length (L) adjusts + 0, (286 mm) Includes metric mounting hardware Part Number 27M M M M M Description Adjustable Tie Bracket, 2 (610 mm) Adjustable Tie Bracket, 3 (914 mm) Adjustable Tie Bracket, 4 (1,219 mm) Adjustable Tie Bracket, 5 (1,524 mm) Adjustable Tie Bracket, 6 (1,829 mm) Bottom Mount tand Bracket Diagonal Bracing 10.2 (258) *Not compatible with MB option. Bolts to 90 standard load gearmotor Includes metric mounting hardware Provides a 10.2 (258) T.O.B. Height Part Number Description L Bracket only for 2 to 5 wide conveyors Bracket Assembly, 06 and wider 2200 & 2300 conveyors For use on steel, aluminum and single post support stands with casters Metric fastener mounting hardware included For use on all stands with casters and any stands over 72 (1829 mm) tall One brace per stand for conveyors up to 24 wide (610 mm) Two braces per stand for conveyors over 24 wide (610 mm) *Not compatible with MB option Part Number 2300 Part Number Description 39MB-T 39MB-TT 39MB-PT 39MB-F 39MB-FT 39MB-PT for two-legged H style & A-Frame stands up to 30 tall (762 mm) for two-legged H style & A-Frame stands over 30 tall (762 mm) for ingle Post and Pillar stands over 30 tall (762 mm) Common Mount Kit tand accessory for mounting multiple conveyors in parallel to one stand Adds 2 (51 mm) to stand height Adds 2.79 (71 mm) to overall stand width For ordering information, see page 81 Tall upport tands Tall tands are the Fixed Height and Adjustable Height tands as shown with additional outrigger support for added stability. These outriggers are required when the height of the stand exceeds 3.5x its width, and they add 16 to stand width. Tall stands over 6 tall include diagonal bracing. Fine Adjustment Kit Provides fine height adjustment via a threaded bolt For use with Fixed Height tands Outriggers Part # Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user. 63

57 2200 & 2300 eries: upport tands Fixed Height upport tands Fixed Foot Model tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to (2,413-2,515mm) Part # Reference 1519 in 0101 increments up to Metric fasteners 4 (102 mm) Height Adjustment * Dependent on stand width, stands over 42 (1,067 mm) may include outriggers (see page 63) wivel Locking Caster Model tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to (1,727-1,829mm) Part # Reference 2024 in 0101 increments up to HH Full width is top plate on 12 wide stands only Adjustable Height upport tands Fixed Foot Model tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH) ( ) ( ) ( ) ( ) ( ) ( ) (762-1,219) * (1,067-1,524) * (1,372-1,829) * (1,676-2,134) * (1,981-2,438) Part # Reference wivel Locking Caster Model tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH) ( ) ( ) ( ) ( ) ( ) (737-1,041) (762-1,346) * (1,194-1,651) * (1,499-1,956) Part # Reference Metric fasteners * Dependent on stand width, stands over 42 (1,067 mm) may include outriggers (see page 63) HH Full width is top plate on 12 wide stands only ingle Post & Pillar upport tands tandard izes tand idth () 1.75 (44) 2.75 (70) 3.75 (95) 5 (44) 6 (152) 8 (203) 10 (254) 12 (305) 14 (356) 16 (406) 18 (457) Part # Reference HH BD HH tand Height (HH)* ( ) ( ) (813-1,067) (1,016-1,270) (1,219-1,473) Part # Reference Base Diameter (BD) 24 (610) 27 (686) 30 (762) 33 (838) 36 (915) ingle Post upport tand Pillar tand (must be secured to floor) Casters do not change overall height Metric fasteners Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user. 64 For ordering information, see page 81

58 2200 & 2300 eries: upport tands hort upport tands Fixed Foot Model tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to ( mm) Part # Reference 0608 in 0101 increments up to wivel Locking Caster Model tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to ( mm) Part # Reference 1113 in 0101 increments up to (112) HH Full width is top plate on 12 wide stands only Fully Adjustable upport tands Fixed Foot Model tand idth () 1.75 (44) 2.75 (70) 3.75 (95) 5 (44) 6 2 (51mm) increments up to (152) (1,219) Part # Reference in 02 increments up to Top of Belt Range 7-19 ( ) ( ) (305-1,097) (305-1,397) (305-1,702) tand Height Reference wivel Locking Caster Model tand idth () 1.75 (44) 2.75 (70) 3.75 (95) 5 (44) 6 2 (51mm) increments up to (152) (1,219) Part # Reference in 02 increments up to Top of Belt Range ( ) ( ) (432-1,097) (432-1,397) (432-1,702) tand Height Reference Metric fasteners (234) Multi Tier tands Minimum Tier Height Per Conveyor Flat Belt 12 (305mm) Cleated Belt 15 (381mm) (208) Base tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to tand Height (HH)* 12 (305mm) 2 (51mm) increments up to (1,524mm) Part # Reference 1212 in 0002 increments up to HH (208) Tier tand idth () 12 (305mm) 2 (51mm) increments up to (1,219mm) Part # Reference 12 in 02 increments up to HH tand Height (HH)* 12 (305mm) 1 (25mm) increments up to (914mm) Part # Reference 0712 in 0002 increments up to Base Full width is top plate on 12 wide stands only Tier Note: Do not use with support stands equipped with casters. upport tands must be anchored to the floor. Do not use if conveyed product overhangs the edge of the conveyor belt due to pinch point created. Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user. 65

59 2200 & 2300 eries: upport tands Quick Adjust tands Fixed Foot Model tand idth ()* 12 (305mm) 2 (51mm) increments up to (914mm) Part # Reference 12 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to (1,676-1,829mm) Part # Reference 2430 in 0101 increments up to Metric fasteners ± 3 (76 mm) Height Adjustment Allows for Quick Height Adjustment Tool-less lock and adjustment handles wivel Locking Caster Model tand idth ()* 12 (305mm) 2 (51mm) increments up to (914mm) Part # Reference 12 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to (1,524-1,676mm) Part # Reference 2733 in 0101 increments up to * Under 12 wide use full top plate option Fixed Foot Model wivel Locking Caster Model A-Frame tands Fixed Foot Model tand idth () 1.75 (44mm) 2 (51mm) increments up to (610mm) Part # Reference 02 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to (1,422-1,524mm) Part # Reference 1014 in 0101 increments up to Metric fasteners ± 2 (51 mm) Height Adjustment for Fixed Foot Model ± 1 (25 mm) Height Adjustment for Fixed Foot Model One (1) martlot per side wivel Locking Caster Model tand idth () 1.75 (44mm) 2 (51mm) increments up to (610mm) Part # Reference 02 in 02 increments up to tand Height (HH)* ( mm) in 1 (25mm) increments up to (1,473-1,524mm) Part # Reference 2733 in 0101 increments up to * From floor to top of belt Fixed Foot Model wivel Locking Caster Model Note: Dimensions = in (mm) Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user. 66 For ordering information, see page 81

60 2200 & 2300 eries: upport tands Cantilever stand mount pecifications: idths: 2 (51 mm) to 24 (610 mm) available in 1 increments Conveyors up to 6 wide are supported with a single cantilever bracket only Conveyors 8 and wider include a pivoting outboard support post Features: Mounts the conveyor from one side only for quick maintenance of the conveyor belt Compatible with the 2200 and 3200 eries Conveyors (2) Models Table Top Bracket upport tand Mount Bracket Easy Access for Quick Belt Removal 6 and narrower 8 and wider Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user eries: cantilever stand mount 39MCB - T Mount Type: T = Table Top Mount = upport tand Mount Belt idth:

61 2200 eries: Accessories Adjustable Lane Guiding L 36.0 (914) Max (457) Max (122) 5.0 (127) 9.6 (244) 7.7 (196) Max. Product 1.2 (30) 0.1 (3) 0.8 (20) pecifications: UHM guide surface on an anodized aluminum mounting rail Painted teel mounting hardware Available in standard 1 (305 mm) increments or can be ordered to any length 5 (127 mm) maximum, 0.25 (7 mm) minimum part height 0.25 (6mm) minimum lane width Package includes (1) lane guide, mounting hardware and adjusting knobs For conveyors up to 24 (610 mm) wide Consult factory for wider lane guide availability Metric fasteners only Important: Exceeding 5 (127 mm) product height will produce a pinch point. Features & Benefits: Compatible with standard Dorner bolt-on profiles Easily adjusts for quick product change over Attach additional guides to create multiple lanes Create lanes, plows, merges and transfers Order additional lane kits separately 2200 & 2300 ERIE: ADJUTABLE LANE GUIDING 27M GGG - 06 LL Conveyor Length Reference Conveyor idth Reference Guide Type: 500 = 2200 Package 502 = Additional Lane Kit for = MB Package 504 = Additional Lane Kit for MB Example: 27M ide Tables 6.00 (152) 68 pecifications: Provides a 6 (152 mm) or 12 (305 mm) wide working surface Adjusts in/out and up/down (0.25 max above bedplate) for product transfer on/off conveyor belts Can be positioned anywhere along the conveyor Anodized aluminum work surface Max load: 5 lbs/ft (6 kg/m), use Adjustable Tie Brackets for added capacity Available in 1 (305 mm) increments from 1 (305 mm) to 99 (30,175 mm) Compatible with 2200, 3200 and 5200 eries Conveyors LLLL Note: Dimensions = in (mm) 5.73 (145) 2.08 (53) supports can be positioned anywhere along table LLLL = 1' to 99' (Maximum 8' length single piece) 2200 & 2300 ERIE: IDE TABLE 27M TTT - 06 LLLL 12 (304) wide table Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user. 6 (152) wide table Table Length (ex = 3 ) Table idth: 06 = 6 12 = 12 Conveyor / Table Type: 601 = 2200, one side 602 = 2200, two sides 603 = MB, one side 604 = MB, two sides Example: 27M w

62 2200 eries: Accessories 90 Adjustable Transfer.5 (12) Ø x (305) Long Guide Mount (x2).5 (12) Ø x 4.50 (114) Long Guide Mount (x2) w = Conveyor Belt width 2.1 (53) Max. 3.1 (79) Customer to install guiding in this area to prevent against possible pinch point. 6.0 (152) Dia (25) 0.8 (20) (64) 0.9 (23) 1.0 (25) T.O.B. pecifications: For conveyors up to 12 (305 mm) wide Requires low side conveyors 0.25 (6 mm) minimum part thickness Hard coat anodized transfer plate Painted steel mounting hardware 48 (1,219 mm) long UHM outside turn guide, customer can trim to fit Maximum recommended part weight is 20 lbs (9 kg) at 50 ft/min (15 m/min) belt speed. Consult factory regarding applications for higher product weights or faster belt speeds (22 mm) minimum product size for 2200 & 2300 eries Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate Note: Due to the wide variety of drive setups and applications point of installation guarding is the responsibility of the end user. Important: Do not use with 03, 08, 55, 62, or 64 High Friction Belts on Infeed conveyor Features & Benefits: Pre-engineered guided turns adjust to a variety of products Accepts standard Dorner bolt-on profiles outside of transfer area Place adjusting rods where required Easily adjusts for quick product change-over Metric fasteners only 2200 & 2300 ERIE: 90 Adjustable Transfer 27M Infeed Conveyor idth Reference Example: 27M * Not compatible with MB option Hardware Accessories pring T-Nut T-lot Extenders (m6 1.0) Mounts in T-slots to attach light weight accessories Recommended for vertical aluminum stand T-slots Part Number M M Description pring T-nut, pring T-nut, M6-1.0 Package of 5 pring T-nuts, Package of 5 pring T-nuts, M (273) w (57) Provides additional T-slots to the end of conveyor Includes mounting brackets and hardware Metric fasteners Part Number M Description T-lot Extender, Pair 2200 eries T-Bars.38 (10) 2.63 (67) 1.88 (48) (m6-1.0) Mounts in T-slots to attach heavy accessories 2.63 (67 mm) long 2 hole model, 0.75 (19 mm) 1 hole model Part Number M M Description 1 hole T-bar, hole T-bar, M hole T-bar, hole T-bar, M6-1.0 Note: Dimensions = in (mm) T-lot Cover naps into conveyor and aluminum stand T-slots Black plastic extrusion Can be trimmed to fit Part Number Description P T-lot Cover, Per 1 (305 mm) of length 69

63 2200 & 2300 eries: Accessories Pulley Transfer Plate* +.25 (6) pecifications: 0.88 (22 mm) diameter minimum product transfer for 2200 & 2300 eries Hard coat anodized finish Package includes extruded aluminum transfer plate, required pulley tail plates and mounting hardware Metric fasteners only 2200 & 2300 ERIE: Pulley Transfer Plate 27M (22) ecures into bottom wiper slot Hardcoat anodized aluminum Includes metric set screws 1.65 (42) Conveyor idth Reference Example: 27M * Not compatible with Gang Drive or MB option * Not compatible with clipper splice or high friction belts * Not compatible with cleated belt conveyors Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. Hardware Accessories Bottom iper* Locate at discharge end of conveyor 0.25 (6 mm) thick steel Removes debris from belt Includes metric set screws = Conveyor idth Reference Note: Bottom wiper standard on 2200 Gang Drive Conveyor * Not compatible with MB option or high friction belts * Not compatible with cleated belt conveyors Part Number 2225M Description 2200 & 2300 eries Bottom iper 2300 eries DustPruf elf Drilling crew elf drilling in martlot For attachment of heavy accessories or supports Part Number Thickness of Mounting Plate /8 (3 mm) /8 (3 mm) - 1/2 (13 mm) /8 (16 mm) - 1 (25 mm) Note: Dimensions = in (mm) 70

64 2200 & 2300 eries: Accessories ide Guides Flared ide Guide L (115) Guides parts onto conveyor belt surface Includes metric mounting hardware Compatible with 2200 & 2300 eries Top of Belt.56 (14) (27) 2.75 (70) Top of Belt L = Accessory length = Conveyor width Part Number M M M M M Description 2 (610 mm) Flared ide 3 (914 mm) Flared ide 4 (1,219 mm) Flared ide 5 (1,524 mm) Flared ide 6 (1,829 mm) Flared ide * Not compatible with MB option tops Adjustable top* 1.81 (46) lides up and down T-slot length Includes metric mounting hardware w +.98 (25) 1.75 (44) Part Number 3076M 2460M Description Adjustable top, 2200 & 2300 eries Adjustable top, MB = Conveyor idth Reference * Not compatible with high friction belts * Not compatible with cleated belt conveyors End top* 1.65 (42) +.68 (17) 1.92 (49) Anodized aluminum stop Includes tail plates and mounting hardware Part Number 2255M 2459M Note: No Gang Drive or cleated belt options Description End top, 2200 & 2300 eries End top, MB Roller Conveyor End top Includes metric mounting hardware Part Number Description 2086M Roller End top Note: Dimensions = in (mm) Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 71

65 2200 & 2300 eries: Accessories Brackets Adjustable Height Bracket* Provides height adjustment (2) Height Ranges Includes mounting hadrware Compatible with 2200 & 2300 eries E TOB RANGE B A.31 (8) C D LOT FOR 1/4-20 OR M6 FATENER 1.88 (48) 2.50 (64) Part Number Description A B C D E x 3 Bracket 2 (51) x 5 Bracket 3 (76) 3 (76) 5 (127) 1.4 (36) 2 (51) 2.4 (61) 3.4 (86) 1.9 (48) to 3.4 (86) 3.3 (84) to 5.3 (135) Table Top Mounting Bracket* 1.62 (41) Includes metric mounting hardware = If the discharge end of conveyor is mounted over a table or similar structure, the customer must provide guiding to prevent against possible pinch point (38).50 (13).34 dia. (9).75 (19) 1.38 (35) Part Number Description M Table top bracket, 2200 eries Table top bracket, 2300 eries Frame Mount Casters* 2.00 (51) w Includes metric mounting hardware Compatible with 2200 & 2300 eries 3.65 (93) w (70) 3.00 dia (76) Part Number Description Frame mount casters, pair Floor Mount Brackets.56 dia (14) (2x) 2.00 (51) w Includes metric mounting hardware Compatible with 2200 & 2300 eries 3.53 (90) w (90) w (118) Part Number Description Floor mount brackets, pair * Not compatible with MB option Note: Dimensions = in (mm) 72

66 2200 & 2300 eries: Accessories Drive haft Accessories upport Block*.41 (10) Diameter 1.0 (25) 1.50 (38) 2.5 (64) (35) (45).38 (10) * Not compatible with MB option For 2200 eries Gang Drive Conveyors Part Number Description 23-33M upport Block, 0.38 Hex haft Clear Cover olid Coupling, Hex to Hex* 1.0 (25) 1.25 (32) * Not compatible with MB option Includes metric set screws Part Number M Description olid Coupling, 0.38 Hex to Hex Fits 2200 & 2300 light load top mount and standard and heavy load top and bottom mount packages Part Number M Description Clear cover, ordered separately Hex haft* pline haft L.38" Across the flats * Not compatible with MB option Part Number Description 0.38 Hex haft, stainless steel, 48 (1,219 mm) long 0.38 Hex haft, stainless steel, 72 (1,829 mm) long L Flexible Coupling Coupling A Coupling B ½ Dia 16 tooth 2.38 (60) 1.25 (32) (A) Includes AE set screws, (B) metric set screws 2.63 (67) 1.5 (38) Part Number Description Coupling 23M29 23M31 Flexible Coupling, 12 mm bore x 0.38 hex Flexible Coupling, 12 mm bore x 12 mm bore B B Compatible with Precision Move Gang Mid Drive Part Number Description ½ diameter x 16 tooth x 4 long pline haft ervice Accessories Tool Kit Part Number 2200M 2500M Description Tool Kit, 2200 & 2300 eries, Metric Tool Kit, 2200 eries, Gang Drive Note: Dimensions = in (mm) Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user. 73