TUBE MILLS, PIPE MILLS & ROLLFORMERS

Transcription

1 UNIVERSAL TUBE & ROLLFORM EQUIPMENT CORPORATION International used metalworking machinery dealer TUBE MILLS, PIPE MILLS & ROLLFORMERS RECONDITIONING Rebuild, re-power and upgrade your current machinery for improved performance. Large Inventory of used, reconditioned and machinery. 125,000 sq. ft. warehouse! CONTROLS & DRIVE SYSTEMS Pre-engineered or custom engineered to your specifications. (419)

2 Including Specialty Services: LARGE INVENTORY RECONDITIONING Specializing in used tube mills, pipe mills & rollform machinery for over 30 years! Universal can recondition, rebuild and upgrade your current machinery to the most exact specifications, extending the life of your equipment and increasing the value of your dollar. Home to one of the largest selections of used tube and pipe mills in the world. Utilizing over 125,000 square feet of warehouse space, we also stock rollformers, coil processing equipment, high frequency welders, cut-offs, accumulators, straighteners, slitting lines and much more. Rollformers Tube Mills Coil Handling Machinery Search our inventory online at CONTROLS & DRIVES Working together with Universal Controls Group to offer you more! To complement our used tube mill and rollforming lines, UCG can build expandable mill control systems pre-engineered or custom engineered to your specifications. UNIVERSAL TUBE & ROLLFORM EQUIPMENT CORPORATION (419) Perrysburg, Ohio USA

3 TABLE OF CONTENTS Entry Line Machinery Uncoilers Shear & End Welders... 6 Accumulators... 7 Tube & Pipe Machinery High Frequency / ERW Tube Mills TIG Tube Mills Preheat / Anneal High Frequency Welders Tube Cut-Offs Tube Re-Cuts Tube End Facers Tube Dedimplers Tube Deburrers Tube End Formers Tube Straighteners Tube Benders Tube Swagers Rollform Machinery Cut-Off Presses Rollformers Flatteners Rolling Mills Slitters More about our Specialty Services on pages: Care is taken to give reliable descriptions but these are not guaranteed. Prospective purchasers are advised to check vital details. We reserve the right to correct stenographic errors. All machinery is subject to prior sale. Visit for conditions of sale.

4 UNCOILERS Coil Weight Coil Width Coil O.D. Type Motorized ,000 LB. 48.0" 60.0" DOUBLE MOTORIZED IOWA PRECISION 20M48DH ,000 LB. 48.0" 72.0" MOTORIZED DAHLSTROM 20H L 612A 20,000 LB. 48.0" 72.0" MOTORIZED PAXON ,000 LB. 36.0" 72.0" MANUAL LITTELL 1S ,000 LB. 24.0" 60.0" MOTORIZED 5HX-24FM-HCC ,000 LB. 54.0" 96.0" MOTORIZED SEN FUNG ,000 LB. 54.0" 72.0" MOTORIZED AMERICAN STEEL LINE ,000 LB. 40.0" 60.0" MOTORIZED ROWE DSL 2732B 10,000 LB. 36.0" 48.0" MOTORIZED ,000 LB. 20.0" 72.0" DOUBLE MANUAL RLM ,000 LB. 36.0" 60.0" DOUBLE MOTORIZED JAYCO JDRE ,000 LB. 30.0" 96.0" DOUBLE MOTORIZED ARKU DR ,000 LB. 32.0" 60.0" MANUAL LITTELL ,000 LB. 28.0" 72.0" MANUAL ,000 LB. 24.0" 60.0" DOUBLE MANUAL LITTELL ,000 LB. 24.0" 60.0" MECON 60B ,000 LB. 20.0" 60.0" MOTORIZED EGAN M ,000 LB. 12.0" 60.0" DOUBLE MANUAL GUILD UC ,000 LB. 24.0" 60.0" MOTORIZED COOPER WEYMOUTH ,000 LB. 24.0" 48.0" MOTORIZED COOPER WEYMOUTH M ,000 LB. 18.0" 60.0" DOUBLE MANUAL COOPER WEYMOUTH ,000 LB. 18.0" 60.0" DOUBLE MANUAL COOPER WEYMOUTH DP ,000 LB. 18.0" 48.0" MANUAL COOPER WEYMOUTH ,000 LB. 18.0" 72.0" MOTORIZED AUTOMATIC FEED ,000 LB. 16.0" 72.0" DOUBLE MOTORIZED ROLLRIGHT ,000 LB. 12.0" 48.0" CRADLE MOTORIZED COOPER WEYMOUTH ,500 LB. 24.0" 60.0" DOUBLE HUMPHRIES AR45/24/DB ,000 LB. 30.0" 60.0" DOUBLE MOTORIZED AMERICAN STEEL LINE ,000 LB. 24.0" 60.0" MANUAL LITTELL ,000 LB. 24.0" 60.0" DOUBLE MANUAL LITTELL Continued on page 5 20,000 LB. X 48 #2750 Coil I.D.: 16" - 20" Coil O.D.: 72" Feed-Up Drive 4-Arm Hydraulic Expansion Controls, 115V DC, Line Volts: 230/3/60 10,000 LB. X 20 RLM #3103 Coil I.D.: 20" - 24" Coil O.D.: 72" Manual 3-Arm Expansion Double Tension Brakes Manual Rotation 3,200 LB. X 48 AWC #3299 Coil O.D.: 48" Strip Width: 8" Control: ACCRA Flex System, 220V Single PH Drive System: Direct Chain Driven DC Regenerative

5 UNCOILERS 4,000 LB. X 12 #2417A Coil I.D.: 14" - 22" Coil O.D.: 48" 2,500 LB. X 18 #2871 Coil I.D.: 16" - 20" Coil O.D.: 60" 2,500 LB. X 18 #3295 Coil I.D.: 16" - 20" Coil O.D.: 60" Manual Expansion: 3-Arm Manual Brake Manual Rotation 2,000 LB. X 18 #3293 Coil I.D.: 16" - 20" Coil O.D.: 60" Manual Expansion: 3-Arm Electric Brake Manual Rotation Coil Weight Coil Width Coil O.D. Type Motorized 447F 4,000 LB. 20.0" 44.0" MANUAL ,000 LB. 20.0" 60.0" MOTORIZED ROWE 4020-DSV ,000 LB. 20.0" 60.0" MECON ,000 LB. 16.0" 72.0" MANUAL ,000 LB " CRADLE MOTORIZED LITTELL 412-H7PDC ,000 LB. 12.0" 60.0" MANUAL REGAL SRNP-SDB 2417A 4,000 LB. 12.0" 48.0" DOUBLE MANUAL B&K ,000 LB. 20.0" 60.0" MANUAL REGAL SRNPADB ,500 LB. 20.0" 48.0" MANUAL AMERICAN STEEL LINE ,500 LB. 18.0" 60.0" DOUBLE MANUAL AMERICAN STEEL LINE ,500 LB. 18.0" 54.0" LITTELL ,500 LB. 18.0" 48.0" MANUAL COOPER WEYMOUTH 448C 2,500 LB. 18.0" 60.0" MOTORIZED COOPER WEYMOUTH CWP ,500 LB. 18.0" 60.0" MANUAL AMERICAN STEEL LINE ,500 LB. 18.0" 48.0" MANUAL AMERICAN STEEL LINE ,500 LB. 12.0" 60.0" DOUBLE MANUAL LITTELL ,500 LB. 12.0" 60.0" MANUAL HR ,500 LB. 12.0" 48.0" MANUAL B&K ,200 LB. 21.0" 60.0" MANUAL BHP ,200 LB. 17.0" 48.0" DOUBLE MANUAL ,000 LB. 18.0" 60.0" MANUAL COOPER WEYMOUTH ,000 LB. 12.0" 60.0" DOUBLE MANUAL LITTELL ,000 LB. 12.0" 48.0" MANUAL WEDNESBURY ,000 LB. 10.0" 60.0" DOUBLE MANUAL LINTON & HIRTS 2503B 2,000 LB. 3.00" 36.0" DOUBLE ,500 LB. 18.0" 48.0" MANUAL ,500 LB. 12.0" 60.0" DOUBLE MANUAL JACO ,000 LB. 18.0" 60.0" AMERICAN STEEL LINE ,000 LB. 12.0" 48.0" EGAN L ,000 LB. 10.0" 48.0" MANUAL DURANT TOOL ,000 LB. 8.00" 48.0" MANUAL MR LB. 12.0" 48.0" MANUAL LITTELL

6 SHEAR & END WELDERS " (1727mm).125" (3.17mm) STATIONARY GUILD " (1524mm) STATIONARY LEE SHAFER " (304mm).135" (3.42mm) STATIONARY GUILD " (304mm) 1.50" (38.1mm).100" (2.54mm) STATIONARY GUILD DMA " (304mm) STATIONARY GUILD ME " (254mm).187" (4.74mm) STATIONARY GUILD D B Strip Width Minimum Strip Width Strip Thickness 10.0" (254mm) 1.50" (38.1mm).156" (3.96mm) STATIONARY NATIONAL STRIP WELDER " (254mm).150" (3.81mm) STATIONARY GUILD DMA R Type 1081A 10.0" (254mm) 1.50" (38.1mm).100" (2.54mm) STATIONARY GUILD DMA " (254mm) 1.00" (25.4mm).100" (2.54mm) PORTABLE KENT " (254mm).120" (3.04mm) STATIONARY GUILD DMA " (203mm) 2.00" (50.8mm).125" (3.17mm) STATIONARY GUILD ME " (203mm).125" (3.17mm) STATIONARY GUILD ME " (152mm) STATIONARY GUILD S673-PE " (101mm).040" (1.01mm) STATIONARY GUILD ME " (50.8mm) STATIONARY LEE SHAFER " (50.8mm) STATIONARY LEE SHAFER #2726 #2490 #2325 #1175 NEW 10 X.100 #3334 Minimum/ Strip Width: 1" (25.4mm) - 10" (254mm) Minimum/ Strip Thickness:.015" (.381mm) -.100" (2.54mm) Material: Mild Steel, HRS, Most Aluminum, Galvanized Steel at Max. 50,000 PSI Yield at.100" SHEAR & END WELDERS AVAILABLE! 3 Blades Air Shear Air Clamps Auto TIG Torch Threadless Patented "Rolex" Torch Drive Nut for Perfect Smooth Welds

7 ACCUMULATORS Strip Width Minimum Strip Width Strip Thickness Minimum Strip Thickness " (457mm) 5.90" (149mm).300" (8.38mm).150" (3.81mm) SRET WLHT165-HY " (254mm) 3.00" (76.2mm).100" (25.4mm).030" (.762mm) SRET WLHT " (254mm) 2.00" (50.8mm).125" (3.17mm).035" (.889mm) KENT R22-RE " (254mm) 2.00" (50.8mm).125" (3.17mm).030" (.762mm) BRONX " (215mm) 2.26" (59.9mm) 1.30" (33.0mm).050" (1.27mm) SRET 10" VERTICAL FLOOP #3337 Line Direction: Right to Left Strip Width: 2" - 10" (50.8mm - 254mm) Gauge:.035" to.125" (.889mm mm) Storage: 600' to 2000' Fill Speed: 600 FPM (Approximate) Running Running Speed: 300 FPM Material: Hot or Cold Rolled Low Carbon Steel Strip 20 H.P. DC Motor: 1750 RPM, 230/460/3/60 DC Drive Panel Specialty Services: INDUSTRIAL CONTROLS To compliment our used tube mill and roll forming lines, Universal Controls Group can build expandable mill control systems pre-engineered or custom to your specifications. Schedule a visit to learn more about our capabilities

8 HIGH FREQUENCY/ERW TUBE MILLS Minimum Wall Thickness Minimum Wall Thickness " (406mm) 4.00" (114mm).500" (12.7mm).125" (3.18mm) WYMER LYDEN " (190mm) 2.30" (5.84mm).240" (6.09mm) NANJIN, BAODING " (76.2mm) 1.00" (25.4mm).166" (4.21mm).032" (.812mm) SFM " (76.2mm).500" (12.7mm).125" (3.17mm).018" (.457mm) ABBEY ETNA 2K " (76.2mm) 0.75" (19.0mm).134" (3.40mm).035" (.889mm) AEF E " (63.5mm).500" (12.7mm).125" (3.17mm).028" (.711mm) W " (63.5mm).500" (12.7mm).125" (3.17mm).035" (.889mm) MCKAY " (63.5mm).500" (12.7mm).095" (2.41mm).020" (.508mm) M " (63.5mm).500" (12.7mm).095" (2.41mm).020" (.508mm) M " (63.5mm).500" (12.7mm).095" (2.41mm).020" (.508mm) M " (50.8mm).500" (12.7mm).110" (2.79mm).020" (.508mm) TUREK & HELLER W " (50.8mm).500" (12.7mm) MCKAY " (50.8mm).500" (12.7mm).074" (1.87mm).018" (.457mm) DONG WOO " (38.1mm).500" (12.7mm).070" (1.77mm).027" (.685mm) BRITISH ARM " (38.1mm).500" (12.7mm).050" (1.27mm).020" (.508mm) MCKAY " (31.7mm).313" (7.95mm).049" (1.24mm).020" (.508mm) M1-1/ " (25.4mm).500" (12.7mm).043" (1.09mm).009" (.228mm) LIVERNOIS " (16.3mm) ABBEY ETNA 2X - 2K " (12.7mm).040" (1.01mm).028" (.711mm) W " (9.50mm).500" (12.7mm).030" (7.63mm) Y-LINE 16" WYMER LYDEN HIGH FREQUENCY PIPE MILL #2881 Hand of Operation: Left to Right : 4" - 16" ( mm) Wall Thickness:.125" - 1/2" ( mm) D/T Ratio: 10:1-60:1 Material Yield: 60,000 PSI Mill Speed: 60 FPM (18.7 MPM) Forming Mill: (1) Driven Pinch Roll Stand (2) 30 HP DC Motors (1) Single Gearbox (1) Double Gearbox (1) Entry Guide (1) Driven Breakdown Stand) (1) 60 HP DC Motor (1) Forming Cage (3) Driven Fin Stands w/side Rolls (6) 60 HP DC Motors (3) Double Gearboxes Welding Section: (1) Seam Guide Stand (1) Weld Pressure Unit, 4-Roll (1) Double Scarfing Unit Sizing Section: (4) Driven Sizing Stands w/side Rolls (8) 60 HP DC Motors (4) Double Gearboxes (1) Turkshead/Straightener, w/up & Down Adjustment, Horizontal Adjustment, Rotary Adjustment (27) Sets of Horizontal Roll Clevises for Fin & Sizing Sections 3" X.166" RAFTED HIGH FREQUENCY TUBE MILL # " X.125" HIGH FREQUENCY TUBE MILL # " X.095" M2 HIGH FREQUENCY TUBE MILL LINE #

9 HIGH FREQUENCY/ERW TUBE MILLS 2.5" X.095" M2 HIGH FREQUENCY TUBE MILL # " X.095" M2 ERW TUBE MILL LINE # " X.040" W15 ERW TUBE MILL # X.125 W20 HIGH FREQUENCY TUBE MILL #3281 6,000 Lb. ASC Double Uncoiler 5 Ton Jib Crane 10 KENT Floop 10 GUILD Shear & End Welder Forming Mill THERMATOOL High Frequency Solid State Welder Sizing Mill ALPHA Cut Off w/single Cut Die Set 40 Run Out Table Automatic Dedimpling System Overhead Unload System Motors: (1) 3 Motor Drive System w/dc Drives, (1) 50 HP Fin Motor, (1) 75 HP Sizing Motor, (1) 50 HP Breakdown Motor Specialty Services: Universal can RECONDITION, REBUILD & UPGRADE your current machinery to the most exact specifications, extending the life of your equipment and increasing the value of your dollar sales@utubeonline.com 9

10 TIG TUBE MILLS Minimum Wall Thickness Minimum Wall Thickness " (76.2mm).875" (22.2mm).154" (3.91mm).028" (7.11mm) MCKAY " (76.2mm).875" (22.2mm).154" (3.91mm).028" (7.11mm) MCKAY " (38.1mm) 0.75" (19.1mm).134" (3.40mm).034" (.863mm) ARDCOR U " (19.1mm).313" (7.95mm) 3" X.154" TIG TUBE MILL #1207 Hand of Operation: Right to Left Tube Diameter: 7/8" - 3" ( mm) Wall Thickness:.028" -.154" ( mm) Spindle Diameter: 2-1/2" (63.5mm) Horizontal Centers: 17" (431.8mm) Vertical Adjustment: 7-1/2" - 12" (190.5mm mm) Forming Mill: (1) Entry Edge Guide (6) Driven Breakdowns (3) Driven Fins Welding: Lead Roll Seam Guide 2-Roll Weld TIG Welding Unit Sizing Mill: (4) Driven Sizing Stands (4) Idle Side Rolls Tooling to Produce: (42.1mm) Specialty Services: GEARBOX SUPPLIER sales@utubeonline.com

11 PREHEAT/ANNEAL KW Rating Main Supply Inverter Supply Kva KW 460 V 555 KVA THERMATOOL VIP KW TAYLOR WINFIELD ROL KW WESTINGHOUSE MFO KW 480 V 100 KVA THERMOMACHINE KW SEAM ANNEALING SYSTEM #2926 Age: 2008 NEW (Never in Production) Input Data: Volts: 460 Frequency: 60 Phase: 3 Amps: 734 HIGH FREQUENCY WELDERS Output Power Input Power Phase Primary Amps 300 KW 480 V/60 HZ 3 HIGH FREQUENCY SAN FENG SF-GGP-H SOLID 225 KW INDUCTROWELD 225 KW ELVA G1 200 KW 460 V H.F. INDUCTION THERMATOOL TI KW 460/30/60 HZ H.F. INDUCTION THERMATOOL TI KW 460 V INDUCTROGUILD KW 380/600 V 3 HIGH FREQUENCY INDUCTRON KW 460 V 3 13 HIGH FREQUENCY THERMATOOL TC KW 460 V INDUCTRON 100 Type NEW HIGH FREQUENCY SOLID STATE WELDERS KW AVAILABLE 300 KW HIGH FREQUENCY SOLID STATE WELDER #3305 Primary Volts: 480V, 3PH, 60 Hz Primary Power: 450 KVA Output Power: 300 KW Output Frequency: 300 KHz Main Transformer Rectifier Cabinet Operator Cabinet Output Cabinet Heat Exchanger

12 TUBE & PIPE CUT-OFFS " (152mm) FRICTION ABBEY ETNA " (76.2mm).134 (3.40mm) 300 FPM " (76.2mm).134 (3.40mm) 300 FPM " (76.2mm).125" (3.18mm) " (76.2mm).075" (1.91mm) 328 FPM FRICTION SRET " (63.0mm).135" (3.40mm) " (53.9mm).085" (2.15mm) " (50.8mm).500" (12.7mm) " (50.8mm).125" (3.18mm) 500 FPM " (50.8mm).080 (2.03mm) 1896B 1896A 2.00" (50.8mm) 1.50" (38.1mm).083" (2.10mm) " (31.7mm).050" (1.27mm) 150 FPM 75 ROBONEX " (76.2mm).075" (1.91mm) 98 FPM FRICTION SRET ALPHA ART-1600 UD " (50.1mm).125" (3.18mm) 100 FPM 70 BETARAM OA-3-FD 2544B 2192B Wall Thickness Speed Cuts Per Minute " (152mm) ABRASIVE TUREK & HELLER " (127mm) 2.80" (7.00mm) FRICTION REPUBLIC " (127mm).250" (6.35mm) " (127mm).187" (4.70mm) 200 FPM 30 ALPHA IR " (38.0mm).100" (2.54mm) 300 FPM 1.00" (25.4mm).049" (1.24mm) 30 FPM Cut Type " (101mm).125" (3.18mm) 300 FPM " (76.2mm).134" (3.40mm) 300 FPM 75 DOUBLE ROTARY ALPHA ALPHA FR P-55 ALPHA SR12-30/45 ALPHA SR ALPHA BETARAM ALPHA LFJ76 SR W2.0FD CSR B&K ALPHA BETARAM OA-2.5-FD ALPHA P-25 BERTOLETTE 4" X.125" CUT #2577 Air Clutch Single Cut Die Set Length Control System (2) Crates of Jaws & Blades 1.50" X.100" DOUBLE CUT #2544B Length Control Double Cut Die Set Hydraulic Accelerator Hydraulic Clutch and Brake Specialty Services: LENGTH CONTROL SYSTEM Increased Line Speeds Greater Accuracy with Reduced Scrap Longer Blade Life Touch Screen Operator Interface Multiple Batch Control with On-The-Fly Changes Blade Width Compensation Exact specifications vary depending on the specific application

13 TUBE & PIPE RE-CUTS 3" X.125 TUBE RE-CUT #3171 Line Direction: Left to Right Cut Length: 7' Min/Max : 1/2-3" ( mm) Max Wall Thickness: 125" (3.1mm) Max Square & Rectangle O.D.: 3" (76.2mm) Diagonal Target Assembly BURRMASTER Double End Debur 20' Bundle Loader Push Button Controls VICKERS Hydraulic Pump Central Grease 30 HP Motor Minimum Wall Thickness Cut Type " (177mm) 0.75" (19.0mm) 1.50" (38.1mm) LATHE MODERN 6L " (177mm) 0.75" (19.0mm) 1.50" (38.1mm) LATHE MODERN 6KD " (128mm) SAW OMP SANTORSO (VI) ITALY 6370A/P-P " (128mm) SAW OMP SANTORSO (VI) ITALY 6370A/PPL " (127mm) 1.00" (25.4mm) 0.50" (12.7mm) ETNA 5HCO " (114mm) LATHE BARDONS & OLIVER 34-1/ " (101mm) 1.00" (25.4mm).320" (8.12mm) DOUBLE HAVEN " (101mm) LATHE BARDONS & OLIVER " (82.5mm).375" (9.52mm) SAW ADIGE TS " (3.175mm) 0.25" (6.35mm) 1.50" (38.1mm) LATHE MODERN 3-L " (76.2mm) 0.50" (12.7mm) 1.00" (25.4mm) DOUBLE PINES " (76.2mm) 0.50" (12.7mm).065" (1.65mm) ROTARY BERTOLETTE " (76.2mm) 0.50" (12.7mm).125" (3.17mm) DOUBLE HAVEN " (76.2mm) 0.50" (12.7mm).125" (3.17mm) DOUBLE HAVEN " (53.9mm) 0.25" (6.35mm) LATHE BARDONS & OLIVER 2B " (38.1mm).187 (25.4mm).094 (2.38mm) DOUBLE HAVEN " (38.1mm).125" (3.17mm).065" (1.65mm) DOUBLE PINES " (9.52mm).125 (3.17mm).049 (1.24mm) DOUBLE HAVEN 802 TUBE & PIPE END FACER 3" X.120" DOUBLE END FACER #3346 Tube Diameter: 3.0" (76.2mm) Minimum Tube Diameter: 1/2" (12.7mm) Wall Thickness:.120" (3.04mm) Minimum Wall Thickness:.028" (.711mm) Length: 6" - 60"

14 TUBE & PIPE DEDIMPLERS " (76.2mm).500" (12.7mm) D Minimum Tube Length BUCKEYE " (76.2mm).500" (12.7mm) " (50.8mm).500" (12.7mm) " (50.8mm).500" (12.7mm) LOOPCO " (50.8mm).500" (12.7mm) LEMONT 1.00" (25.4mm).500" (12.7mm) 2-48 Minimum - Tube Length TUBE & PIPE DEBURRERS Minimum - Minimum - Bar O.D " " ( mm).500" " ( mm).375" " ( mm) KENT " - 180" ( mm).375" " ( mm).375" " ( mm) BURRMASTER " - 168" ( mm).375" " ( mm).375" " ( mm) BURRMASTER " - 144" ( mm).375" " ( mm).375" " ( mm) ADIGE ST " - 120" ( mm).375" " ( mm).375" " ( mm) " - 120" ( mm).375" " ( mm).375" " ( mm) BURRMASTER " - 120" ( mm).375" " ( mm).375" " ( mm) ADIGE ST " " ( mm).375" " ( mm).375" " ( mm) BURRMASTER " " ( mm).375" " ( mm).375" " ( mm) BURRMASTER " " ( mm).375" " ( mm).375" " ( mm) BURRMASTER " " ( mm).375" " ( mm).375" " ( mm) BURRMASTER " " ( mm).375" " ( mm).375" " ( mm) BURRMASTER 8 BURRMASTER #2388 Profile Section: 3/8" x 3/8" to 2" x 2" (10mm x 10mm to 50mm x 50mm) Output: 3,500 Pieces per Hour Brush Length: 18" (450mm) Brush O.D.: 10" or 12" (250mm or 300mm) BURRMASTER # " (88.9mm).750" (19.0mm) DICKEY & SONS 3-1/ " (76.2mm) " (76.2mm) 1.25" (31.8mm) TUBE & PIPE END FORMERS Minimum Length That Can Be Sized 4.00" (101mm) " (76.2mm).500" (12.7mm) VAILL 7-30T " (76.2mm) 15.0" (381mm) DICKEY " (70.0mm) 1.00" (25.4mm) " (50.8mm) " (25.4mm) 102" (2590mm) " (19.0mm).125" (3.18mm) VAILL 60 FENN RESENER " (63.5mm) FENN 20 I/O EAGLE I/O 14 wwww.utubeonline.com

15 TUBE & PIPE STRAIGHTENERS " (152mm) Minimum Wall Thickness 1.00" (25.4mm).500" (12.7mm) " (76.2mm).500" (12.7mm).178" (4.50mm) " (76.2mm).500" (12.7mm).158" (4.00mm) " (206mm) 0.25 (6.35mm) " (25.4mm).375" (9.53mm) 5-Roll, Rotary " (12.7mm).125" (3.18mm) 3220 SUTTON 2-25 TAIYUAN HUAYE JZ 089 TAIYUAN HUAYE JZ " (76.2mm).750" (19.1mm) 7-Roll, Rotary BIGWOOD 1B " (25.4mm).375" (9.53mm) Type 5-Roll, Rotary 6-Roll, Rotary 6-Roll, Rotary 6-Roll, Rotary 5-Roll, Rotary 7-Roll, Single Plain 6-Roll, Rotary MACKINTOSH HEMPHILL BIGWOOD OA MACKINTOSH HEMPHILL TUREK & HELLER AXY BIGWOOD 3247 AY-HD 1-1/8" 6-ROLL MACKINTOSH-HEMPHILL # /2" X.178" 6-ROLL TAIYUAN #3244 Top (3) Rolls w/vertical Adjustment All (6) Rolls Have Controls for Offset Arrangement of Rolls Splitter Box Driving Individual Roll Through Universal Shafts TUBE & PIPE BENDERS Wall Thickness Hydraulic Power " (57.1mm).065" (1.65mm) 25 Ton PINES 25T " (50.8mm).083" (2.10mm) 20 Ton PINES 20T " (25.4mm).072" (1.82mm) 5 Ton PINES 5T TUBE & PIPE SWAGERS Die Width x Height x Length Roll Diameter " (114mm) 4.00" x 3.50" x 6.00" STEVENS & BULLIVANT 15CS " (31.7mm) 3.12" x 2.25" x 7.50" FENN 4-1/ " (57.1mm) 3.12" x 2.25" x 7.50" 1.50" (38.1mm) FENN 4-1/ " (44.4mm) 2.00" x 2.06" x 4.62" " (31.7mm) 1.50" x 1.81" x 3.50" 1.50" (38.1mm) TORRINGTON 323SS " (25.4mm) 1.87" x 1.12" x 3.00" 1.56" (39.6mm) ABBEY ETNA " (9.52mm) 1.19" x 0.88" x 2.00" 1.00" (25.4mm) 2-1/4" FENN W/AUTOMATIC LOADER #1969 MANNY ISMAN Rack & Turret Feeder Motor Data: 10 HP, 230/460/3/60 #

16 SHEET & STRIP CUT-OFF PRESSES Capacity Distance Between Post 80 TON X 2" #1549 Shut Height: 15" - 18" Distance Floor to Platen: 42-1/4" CENTRO-MATIC Centralized Lube System WICHITA Air Tube Disc Clutch Motor: REULAND 15 HP, 1800 RPM, Voltage 230/460/3/60, Amps 36/18 Stroke Posts/Diameter Ton 16.0" L-R / 19.0" F-B 2.50" 4 / 2.50" CO Ton 117" L-R / 29.0" F-B 2.00" 4 / 4.00" ASC Ton 40.5" L-R / 13.5" F-B 5.00" 4 / 3.75" Ton 19.0" L-R / 15.0" F-B 2.00" 4 / 2.25" Ton 14.0" L-R / 18.0" F-B 6.00" 4 / 2.25" P Ton (est.) 24.0" L-R / 12.0" F-B 4.00" 4 / 2.75" Ton 22.0" L-R / 18.0" F-B 4.00" 4 / Ton 19.0" L-R / 15.0" F-B 4.00" 4 / 2.25" Ton 19.0" L-R / 15.0" F-B 2.00" 4 / 2.25" 2732F 36 Ton 12.0" L-R / 30.0" F-B 4.00" 4 / Ton 12.0" L-R / 64.0" F-B 3.00" 4 / 3.00" BRADBURY Ton 19.0" L-R / 9.50" F-B 3.00" 4 / 2.25" Ton (est.) 30.0" L-R / 19.0" F-B 3.00" 4 / 3.00" Ton 18.0" L-R / 14.0" F-B 3.00" 4 / 2.00" Ton 16.0" 3.00" PNEU POWER Ton 10.5" L-R / 15.0" F-B.500" 4 / 2.00" SAMCO Ton 10.0" L-R / 18.0" F-B 4.00" 4 / 2.50" KANE & ROACH Ton 16.0" 2.50" 4 / 3.00" Ton 6.00" L-R / 17.0" F-B 2.50" 4 / 2.00" Ton 27.5" L-R / 27.5" F-B 4.00" 4 / 3.50" CO Ton 84.0" L-R / 27.0" F-B 3.00" 4 / 3.00" AIRAM ATP Ton 38.0" L-R / 32.0" F-B 3.00" 4 / 3.00" AIRAM ATP /ATP Ton 21.0" 2.50" 4 / 2.25" CO-12-4HA21 P-50 C0-10-4HA1 CO-12-4HA A 25 Ton 20.0" L-R / 14.0" F-B 4 / 2.00" PNEU POWER Continued on page 19 B & K ALPHA PM MACHINE Ton 14.0" L-R / 18.0" F-B 4.00" 4 / 2.00" P-30S PM MACHINE Ton 6 / OMEGA 80 TON X 2.5 #1854 P-40S P-40 P-40 P-40 4CT36 35T P TON X 4" P-50 #2434 Cutting Strokes Per Minute: 50 Speed: 150 FPM Max. Shortest Cut at Max. Speed: 36" MINSTER Combination Air Clutch & Brake Motor: 7.5 HP, 1160 RPM Adjustable Base & Scrap Chute Push Button Console 50 TON X 2 P-50 # TON X 3" #

17 SHEET & STRIP CUT-OFF PRESSES Capacity Distance Between Post Stroke Posts/Diameter Ton 2.00" 2 / CLEARING Ton 24.0" L-R / 18.0" F-B 3.00" 4 / 1.75" Ton 22.0" L-R / 18.0" F-B 2.50" 4 / 1.50" Ton (est.) 20.0" 2.00" 4 / 1.75" Ton 11.0" 1.50" 4 / 2.25" Ton 18.0" L-R / 20.0" F-B 1.00" 4 / 2.00" Ton 12.5".500" 2 / LOCKFORMER Ton 8.50" L-R / 14.0" F-B 1.00" 4 / 1.50" PNEU POWER Ton 7.50" 1.50" 2 / MICHIGAN Ton 8.50".125" 2 / RAFTER " L-R / 16.0" F-B 1.00" 4 / 2.00" ARDCOR MAX ROLL DAHLSTROM PNEU POWER Ton 9.00" 2.00" 2 / 1.75" Ton 16.5" L-R / 16.5" F-B 4 / 2.00" Ton 12.0" 2.00" 2 / 2.00" Ton 9.00" 2.00" 4 / 1.75" Ton 8.00" 2.00" 2 / 1.75" Ton 8.00" 2.00" 2 / 1.75" Ton 12.0" 2.00" 4 / 1.75" Ton 24.5" L-R / 24.5" F-B 1.50" 4 / 2.00" PNEU POWER Ton 8.50" L-R / 14.0" F-B 3.00" 4 / 2.00" PNEU POWER Ton 20.0" L-R / 14.0" F-B 3.00" 4 / 1.50" PNEU POWER Ton 3.00" 4 / PNEU POWER Ton 8.00" 2.00" 2 / 1.50" Ton 7.00" 2.00" 2 / 1.50" Ton 2.00" 2 / B & K 12-1/2 CT " L-R / 19.0" F-B 4 / 2.25" DAHLSTROM B & K PNEU POWER CD TP 4P-20 CO-6-HWA CO-6-HWA CO Ton 8.50" L-R 3.00" 4 / 1.50" CONTOUR 2503A 12 Ton 2.00" 2 / 1.50" Ton 2.00" 4 / METFORM Ton 11.0" L-R / 5.00" F-B 2.50" 4 / 1.75" DAHLSTROM CO-6-HA CO-6-HW ACO-15 4P-12 4P-12 4-P-12 CO4-HA CO4-HW CO4-HWA MCO P TON X 2 MAX ROLL #2994 Die Area: 16" x 25" Max. Open Height: 20 TON X 1 PNEU POWER #2571 Bed Size: 26.5" x 25 Max. Open Height: 12.5" 20 TON X 1 PNEU POWER #2346 Bed Size: 32" x 32" Max. Open Height: 16" 12 TON X 3 PNEU POWER #2433 Bed Size: 14" x 14.5" Max. Open Height: 12" Scrap Chute 7.5 HP Motor (1) Valve Rotary Union Adjustable Base Scrap Chute (2) Air Tanks (2) Air Valves Adjustable Base Scrap Chute 2-Post Die Set Shear Adjustable Base Scrap Chute (1) Tank (1) Valve

18 ROLLFORMERS 14 STAND X 1.5 #3267 Line Direction: Right to Left Line Speed: 100 FPM Spindle Key Size: 0.25" Thickness:.078" Base Top to Center Lower Spindle: HP Motor w/vari Speed Manual Drive Start, Stop, Run, Jog Buttons 15 STAND X 3 M2-1/2 #2733 Of Stands Spindle Diameter Roll Space Horizontal Center Vertical Adjustment " 6.00" 3.50" (Centers) " 60.0" 18.0" 5.00" " ASC CAS " 12.0" 5.50" " RLM R18-08 LOCKFORMER " 11.0" 9.00" 2.50" MAX ROLL " 12.0" 7.00" (Centers) LOCKFORMER L " 12.0" 14.0" 4.00" " B&K / MV " 48.0" 18.0" 5.50" " ASC CAS RH " 24.0" 9.00" 4.00" " BRADBURY 315-B " HMW 1-3/ " 8.00" 8.00" 4.00" (Centers) FLAGLER U ARDCOR " 36.0" 18.0" M2-1/ " 27.0" 18.5" 1.00" " HAYES " 10.0" 12.0" 4.50" " RDF " 11.0" 12.0" 3.50" " B&K / MV " " 5.00" " ARDCOR F15-2-1/ " 44.0" 11.5" 4.75" " 42.0" 13.5" 4.00" " BRADBURY 415RF " 40.0" RAFTER " 15.0" RAFTER " 5.00" 10.0" 5.00" " DAHLSTROM 450/ " 8.00" 8.00" 4.50" (Centers) T&H / LOCKFORMER MU " 6.00" 6.00" 3.50" (Centers) LOCKFORMER " 6.00" 9.00" 4.50" " 14 HMW 1-1/2 Continued on page STAND X 2.75 HAYES # STAND X 2.5 #2614 Tooling for AD-LOK standing seam roof panel

19 ACCUMULATORS ROLLFORMERS Of Stands Spindle Diameter Roll Space Horizontal Center Vertical Adjustment " 36.0" 18.0" 6.00" " ASC CAS " 33.0" 12.0" 5.44" " 12 MW2-1/ " 17.0" 15.0" 5.00" " M " 14.0" 18.0" 6.00" " KANE & ROACH 2WFU FORM " 15.0" 9.00" " 12HMW 1-1/ " 12.0" 14.0" 4.00" " B&K/MV " 9.00" 12.0" 5.50" " PROMA " 6.00" 8.00" 4.00" " 12 MLW-1-1/ " 8.00" 12.0" 4.00" " CONTOUR , SR " 8.00" 11.0" 4.00" " M1-1/ " 8.00" 11.0" 4.00" " M1-1/ " 4.375" 6.00" 4.00" (Centers) ENGEL " 3.50" 5.00" 5.25" (Centers) 12 RLW " 10.5" 5.00" " Continued on page STAND X 2.5 #2725 Line Direction: Right to Left Base Top to Center Lower Spindle: 5" Spindle Key Size: 3/8" 12 STAND X 3 #3059 Line Direction: Right to Left Base Top to Center Lower Spindle: 7-5/8" Spindle Key Size: 1/2" 12 STAND X 1.5 #3085 Line Direction: Right to Left Base Top to Center Lower Spindle: 6" Spindle Key Size: 3/8" Specialty Services: MACHINE RECONDITIONING Universal can recondition, rebuild and upgrade your current machinery to the most exact specifications, extending the life of your equipment and increasing the value of your dollar. Rollform Lines Tube Mill Lines Coil Handling Machinery sales@utubeonline.com

20 ROLLFORMERS 10 STAND X 2.25" PEARSON #3111 Line Direction: Left to Right Base Top to Center Lower Spindle: 5-1/2" 4,000 Lb. LITTELL Uncoiler Flattener, 2 over 3 Roll 1 B&K Pre-Punch 40 Ton P-40 Cut-Off Press Tooling for Standard Perforated Garage Door Angle 1.25" x 1.25" Of Stands Spindle Diameter Roll Space Horizontal Center Vertical Adjustment " 54.0" 16.0" 9.00" " BRADBURY M " 30.0" RAFTER " 10.0" 12.0" 5.75" " PEARSON " 12.0" 12.0" 5.00" " PEARSON 1-3/ " 6.00" 9.00" 4.50" " 10HMW1-3/ " 8.00" 18.0" 4.00" " M1-1/ " 6.00" 8.00" 4.00" " 110 MLW " 6.00" 8.00" 4.50" " 10-HM-1-1/ " 3.50" 10.0" ENGEL " 12.0" 8.00" 5.00" (Centers) LOCKFORMER L " 5.00" 3.00" (Centers) ENGEL DH " 10.0" 12.0" 4.00" " B&K/MV " 6.00" 6.00" 3.50" (Centers) LOCKFORMER " 8.00" 7.00" 3.25" " DAHLSTROM " 7.00" 7.00" 3.25" " " 4.75" 4.00" 2.50" (Centers) " 3.50" 4.50" 2.75" " Continued on page STAND X 3" # ,000 LB. BRADBURY Uncoiler 70 Ton AIRAM Cut-Off w/die Set Motor Tooling for BRADBURY #BCO-019 Ribbed Panel 10 STAND X 1.12" #2249 Strip Guide Motor 10 STAND X 1" #2759 Motor

21 Of Stands Spindle Diameter ROLLFORMERS Roll Space Horizontal Center Vertical Adjustment " 32.0" 15.0" 5.00" " KANE & ROACH " 16.0" 15.0" 5.00" " M " 16.0" 11.0" 4.00" " B & K 1B " 10.0" 11.0" 5.50" " DAHLSTROM " 8.00" DETROIT " 7.00" 8.00" 4.50" " 8-HM-1-1/ " 5.00" 6.50" DAHLSTROM 350/ " 6.00" 7.00" 4.50" " METFORM MCO " 4.00" ENGEL " 2.50" 6.00" 3.50" " 10.0" 14.0" 4.00" " ARDCOR 1F ARTOS " 10.0" 14.0" 4.25" " ARDCOR 1F " 6.00" 8.00" 3.50" " MLW 1-1/2 9 STAND X 2.5 KANE & ROACH #2715 Line Direction: Right to Left Spindle Diameter: 2.50" Roll Space: 32" Horizontal Center: 15" Vertical Adjustment: 5" - 8" Base Top to Center Lower Spindle: 6.25" Spindle Key Size:.625" Entry Guide 8 STAND X 1 ENGEL #2163 Line Direction: Right to Left Spindle Diameter: 1" Keyway Size: 0.25" Roll Space: 4" Center, 2" Outsides Horizontal Centers: 4" Vertical Center: 2.25" Strip Guide Motor: 5 HP, 208, 220/440/3/60, 1435 RPM 7 STAND X 1 PANEL SEAMER #3158 Line Direction: Right to Left Spindle Diameter: 1" Roll Diameter: 3.75" Roll Space: 1.50" Horizontal Centers: 6" Vertical Adjustment: 3.50" Pinch Rolls Motor: 2 HP, 208/230/460, 3PH 60 HZ, 1740 RPM Specialty Services: GEARBOX REBUILDING When you re in need of gearbox repair Universal s experienced team can repair, rebuild or replace your gearbox(s) in the shortest possible time. Schedule a visit to learn more about our capabilities

22 FLATTENERS 18" X 1.5", 7-ROLL JAYBIRD W/CONVEYOR TABLE # ", 5-ROLL #2986 Strip Width Strip Thickness Roll Diameter ".062" 7-Roll (3 over 4) LITTELL 432-7PDL " 18 GA. 3.00" 7-Roll (3 over 4) COE CF " 2.00" (8 over 7) DAHLSTROM D " 1.50" 7-Roll (2 over 3) JAYBIRD J " 1.25" (3 over 4) US TOOL CO. RS Work Rolls 19.0".150" 2.25" MECON SERVO FEEDER " 3.00" (2 over 3) LITTELL #1930 Air Quick Lift to All Work Rolls Manual Cross Connected Roll Depth Adjustment Manual Grease Lubrication Footage Counter 10 HP Drive, 240 V DC ROLLING MILLS Roll Diameter Roll Width Rolling Speed " 7.00" DECO MACHINERY SERIAL # " 6.00" 0-65 ft./min. (0-20 m/min.) MARSHALL RICHARDS SERIAL # Specialty Services: SELL YOUR SURPLUS EQUIPMENT Always buying tube, pipe & rollform machinery. It's Easy, Contact us with what you would like to sell and we'll make you an offer. If you accept our offer, we'll send payment immediately and schedule a truck to pick up your surplus! Contact us today to see what your surplus is worth

23 SLITTING LINES /CAUFFIEL SLITTING LINE Hand of Operation: Right to Left Materials: Mild Steel Shear Strength: 50,000 PSI (22,680 kgs.) Coil Weight: 20,000 Lbs. (9,072 kgs.) Coil I.D.: Entry: 16" - 24" ( mm) Recoiler: 20" (508mm) Coil O.D.: 60" Max. (1524mm) Turnstyle Uncoiler Peeler/Hold Down Slitter Scrap Winder With Oscillator Recoiler Control Console, AC/DC Panels Tooling: Knives, Spacers & Stripper Rings Strip Width Strip Thickness Coil Weight " ".250" 35,000 LB DIA. x 54.0" L PAXSON " 30,000 LB. 7.00" DIA. x 67.0" L 7S " 20,000 LB. 7.00" DIA. x 60.0" L / CAUFFIEL " 10,000 LB. 4.00" DIA. x 22.0" L TACHE OLADE Arbor ".125" 5,000 LB. 28.0" L " 10,000 LB. 3.75" DIA. PAXSON ".050" 4,000 LB. 3.00" DIA ".006" 5,000 LB. 28.0" L W BRACE ENGLAND " TORRINGTON A 22" X 4" TACKE OLADE SLITTING LINE #2520 Hand of Operation: Right to Left Materials: Mild Steel Shear Strength: 50,000 PSI Coil Weight: 10,000 Lbs. Coil I.D.: Entry: 16" - 24" Recoiler: 20" Turnstyle Uncoiler TACKE OLADE Slitter TACKE OLADE Scrap Winder TACKE OLADE Recoiler Control Console Electrical Panels (2) Hydraulic Power Packs

24 UNIVERSAL TUBE & ROLLFORM EQUIPMENT CORPORATION (419) Glenwood Rd. Perrysburg, Ohio USA Universal Tube & Rollform Equipment Corporation and Universal Controls Group reserve the right to change any and all information in this catalog without notice. Care is taken to give reliable descriptions but these are not guaranteed. Prospective buyers are advised to check vital details. We reserve the right to correct stenographic errors. All machinery is subject to prior sale. Visit for conditions of sale.