State-of-the-Art Coil Slitting Facility
|
|
- Neal Wilcox
- 5 years ago
- Views:
Transcription
1 SEALED BID AUCTION State-of-the-Art Coil Slitting Facility Extremely Late Model Slitting Lines Banding Line Overhead Bridge Cranes Quality Inspection Railcar Mover Facilities Equipment Real Estate Available BIDS DUE: September 28 th Romulus, Michigan West Fourteen Mile Road, Suite 301 Farmington Hills, Michigan USA Ph Fx A Hilco Global Company Vested in Your Success
2 HilcoTM Industrial SEALED BID AUCTION EurEka rd. romulus, mi BIDS DUE MONDAY, SEPTEMBER 28 TH PrEvIEw MONDAY THURSDAY, SEPTEMBER 21 ST - 24 TH 8AM TO 4PM LOcAL TIME OR EARLIER BY APPOINTMENT FOR MORE INFORMATION, CONTACT KEN PLANET AT OR KPLANET@HILCOGLOBAL.COM View Videos of Lines Under Power: SLITTING LINES To schedule an auction, please call Hilco Industrial at HIlCo (44526)
3 SLITTING LINES SLITTING LINES 1 BRANER MODEL (LINE 72) 60,000 LB X 72" X.250" CAPACITY SLITTING LINE (2010), Material Data: Low Carbon Steel Coated & Bare Steel Coil, Prime ASTM Quality Specifications, Max Yield Strength 50,000 PSI, Max Shear Strength 50,000 PSI, Strip Thickness Min.015" Max.250" Coil Specifications: Entry Width 10" 72", Entry OD Max 72", Entry ID 20" 24", Exit Width Max 72", Exit ID 20" & 24" (with Filler) Operation Modes & Speeds: Single Loop Drive Slitting: 0 1,000 FPM High Gear Tight Line "Push/Pull" Slitting: 0 1,000 FPM High Gear / FPM Low Gear Tight Line Pull Through Slitting: 0 1,000 FPM High Gear / FPM Low Gear Slitting Capacities: Tight Line 5 Cuts at.250" / 20 Cuts at.015", Single Loop 11 / 20 Cuts at.015" Travelling Coil Car #CC-60K, S/N EH Stationary Mandrel Uncoiler #60K x 72 x 20"/24", S/N UC-12639, Capacity 60,000 Lbs, Coil Width 72", Coil ID 20" 24", Hydraulic Expansion Crop Shear & Advanced Model HET400 Thickness Gauge Advanced Thickness Gauge with Console Control Edge Table S/N ET Slitter #9" x 72" x 2HD x 150 HP Two-Head Slitter, S/N SL-12643, Arbor Diameter 9", 150 HP Baldor Reliance DC Drive Two (2) Scrap Rewinders, S/N SW FAR & SW NEAR Support Table Tension Stand S/N TS Leveler S/N EH , Eight Powered Adjustment Rolls Exit Crop Shear 72" x.250", S/N EU & EU Recoiler with 250 HP Baldor Reliance Inverter Duty Drive, Hydraulic Push-Off Travelling Coil Car S/N EH-10284, Capacity 60,000 Lbs, Power Clamp Roll Operator's Console Control Assorted Blades & Spacers Betenbender 24" Hydraulic Shear, 24" Back Gauge 1 BRANER MODEL (LINE 73) 60,000 LB X 72" X.250" CAPACITY SLITTING LINE (2002), Material Data: Cold Rolled, Coated & Hot Rolled P&O Steel, Material Quality: ASTM A568 or Better, Max Tensile Strength 100,000 PSI, Max Shear Strength 50,000 & 80,000 PSI, Strip Thickness Min.025" Max.250" Right to Left Operation Coil Specifications: Entry Width 12" 72", Entry OD 28" 72", Entry ID 20" 24", Exit Width 28" 72", Exit ID 20" & 24" (with Fillers) Operation Modes & Speeds: Full Loop Slitting:- 0 1,000 FPM, Constant Push/Pull Slitting: 0 1,000 FPM, Constant Pull Through Slitting: 0 1,000 FPM High Gear (Base) / FPM Low Gear (Base) Slitting Capacities: 50,000 PSI Shear Strength 9 Cuts at.250" / 27 Cuts at.025", 80,000 PSI Shear Strength 5 / 17 Cuts at.025" Travelling Coil Car #60K x 72, S/N LH Mandrel Uncoiler #60K x 72, S/N UC-10266, 25 HP Hydraulic Power Unit, Powered Hold Down Arm Outboard Support Arm, S/N UC Entry Table, S/N ET Advanced #HET400 Thickness Gauge with Console Control Two Head Slitter #72x2x9.5000, S/N SL-10270, Arbor Diameter 9.5", 200 HP DC Drive Two (2) Scrap Winders, S/N SW A & SW B Leveler Exit Crop Shear, S/N EU Recoiler, S/N RC-10282, Support Arm, 300 HP DC Drive, Hydraulic Push Off Travelling Coil Car, Capacity 60,000 Lbs Operator's Console Control Misc Knives & Spacers 1 BRANER 60,000 LB CAPACITY FOUR ARM TURNSTILE, S/N H (2010), Turnstile Runs with Slitting LInes 72 & 73, Floor Standing, Pad Width 55", Coil Width 72" Visit Our Website for Complete Bidding Procedures BIDS DUE SEPTEMBER 28 TH For more information, please visit us on the web at 3
4 BANDING LINE BRIDGE CRANES CRANE ACCESSORIES COIL HANDLING 2011 BANDING LINE 1 BRANER COIL BANDING LINE (2011), Braner Traveling Downender with Control Console, Braner 72" Coil Loading Table, S/N PC-13725, Braner Rotary 90 Degree Roller Conveyor, S/N EH-13482, Approx. 40' Length x 72" Roller Conveyor, Dalex #G1 203L (W) Control, Nr. ZZB/N-07052, Amca Automatic Bander, Amca Gantry Type Roll Handler with Amca Push Arm and 6 Position Rotary Load Table, Exit Conveyor approx. 25' 2013 Visit Our Website for Complete Bidding Procedures BIDS DUE SEPTEMBER 28 TH BRIDGE CRANES 2 ZENAR 35 TON DOUBLE GIRDER TOP RUNNING BRIDGE CRANES, S/Ns 8532, 8550 (Both 2013), Span 103' 8", Class D, Main Hoist Capacity 35 Ton, Type HD16, Max Lift 30', Hoist Speed 23 FPM (Full Load Vector) / 35 FPM (No Load), Trolley Speed 107 FPM (Var Freq), Bridge Speed 346 FPM (Var Freq), Cab Controlled, NOTE: Coil Grab Attachment and Scale are not Included CRANE ACCESSORIES / COIL HANDLING 1 BRANER 15,000 LB X 36" COIL UPENDER, S/N CT (2011), 20' x 15,000 Lb Capacity Conveyor, S/N PC ZENAR 32 TON CAPACITY ROTATING COIL GRABS, S/Ns 8550, B1012, B1013 (All 2013), Coil Width 25" to 6' 2", Max OD 72", Designed for 20" 24" ID Coil, Rotate Speed 1.59 RPM, Grab Speed IPM, Rotation is 330 Degrees with Positive Stops 2 BRADLEY 60,000 LB CAPACITY COIL GRABS, S/Ns 93121, 93196, Coil Width Nominal 30" 72", Motorized Adjustment, Weight 5,410 Lbs 1 BRADLEY 18,000 LB CAPACITY ID COIL GRAB, S/N 12157, ID Range 20" 24", ASME BTH-1 Design Category B / Service Class 2, Storage Stand 2 COIL CARS 4 To schedule an auction, please call Hilco Industrial at HIlCo (44526)
5 CNC VERTICAL MACHINING CENTER RAIL CAR MOVER INSPECTION / METALLUGICAL LAB TRUCKS ROLLING STOCK CNC VERTICAL MACHINING CENTER 1 HURCO VM1 3-AXIS CNC VERTICAL MACHINING CENTER, S/N VM BEA / H-V10555 (2004), Table 14" x 30", Travels: X 660 mm (26"), Y 356 mm (14"), Z 457 mm (18"), 16-Position Automatic Tool Changer, Motor 11 KW, Spindle Speeds 8,000 RPM Max, Dual Arm Tool Changer, Hurco Max CNC Control, Yaskawa Vari Speed Adaptive Vector Control INSPECTION / METALLURGICAL LAB 1 INSTRON MODEL KN CAPACITY TENSILE TESTER, S/N 5582P6661 (2003), (Two) Instron Pneumatic # Wedge Action Grips 1 WILSON ROCKWELL MODEL 2000 DIGITAL HARDNESS TESTER, S/N R2000P ARL MODEL 2460 SPECTROMETER, S/N 327 (1994) RAIL CAR MOVER 1 TRACKMOBILE MODEL HERCULES RAIL CAR MOVER, S/N LGN (2014), Max. Tractive Effort 44,718 45,995 Lb, Cummins QSB 6.7 L Turbo Charge Diesel Engine, HP 160 (KW 119), Engine # , Engine Spec TM , Rail Wheels & Road Wheels, Interlocking Lug Drive, Hydraulic Actuated Disc Brakes, Meter: 60 Hours ROLLING STOCK 2 YALE MODEL GLC120VXNGAV086 12,000 LB CAPACITY VERACITOR 120VX FORKLIFT TRUCKS, S/Ns F818V01564K, F818V01561K (Both 2013), LPG Type, Sideshift Fork Positioner, Forks 48"/54, Two-Stage Mast, Max Lift 114", Front Tires 22x12x16 Cushion, Rear Tires 18x8x12 1/8 Cushion, Meter Low as 1,873 Hours, Powershift 1 Speed Transmission, Note: LPG Tank not Included 1 TENNANT MODEL T20ECH20 RIDING TYPE SWEEPER & FLOOR SCRUBBER, S/N T (2013), LPG Type, Hours Meter 462, NOTE: No LPG Tank TRUCKS / SUV 1 FORD MODEL F-350 LARIAT SUPER DUTY PICKUP TRUCK, VIN 1FTWW33P96EA53455 (2006), 4-Wheel Drive, Odometer: 44,945 Miles, Dual Rear Tires, Crew Cab, Automatic Transmission, Power Stroke V8 Turbo Diesel Engine, "The Boss" Snow Plow, S/N 74209, Plow Width 8' 2", Plow Joystick Control 1 FORD MODEL F-150 4X4 PICKUP TRUCK, S/N 1FTFX1ETXDFA52348 (2013), 4-Wheel Drive, Super Cab, Odometer 38,302.9 Miles, Automatic Transmission, 3.5 L EcoBoost Gasoline Engine, GVWR 7,200 Lbs 1 FORD MODEL EDGE SEL SPORT UTILITY VEHICLE, VIN 2FMDK3JC9DBA40261 (2013), Odometer: 45,089.4 Miles, Four Door, Automatic Transmission, 3.5 L V-6 Gasoline Engine, Dual Zone Electronic Air Conditioning For more information, please visit us on the web at 5
6 OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA EUREKA ROAD ROMULUS, MICHIGAN REAL ESTATE AVAILABLE FOR SALE OR LEASE BY PRIVATE NEGOTIATIONS 200,215 Square Feet Available 6,080 Square Feet of Office Space Situated on Acres 40 Clear Height (3) 35-Ton Cranes For more information, please contact HilcoTM (8) 25x16 Grade Level Doors / (2) Truckwells Active Interior CSX Rail Great Freeway Access & Exposure Heavy Power GREG HUDAS (248) ghudas@signatureassociates.com JOE HAMWAY (248) jhamway@signatureassociates.com Industrial SEALED BID AUCTION State-of-the-Art Coil Slitting Facility Extremely Late Model Slitting Lines Banding Line Overhead Bridge Cranes Quality Inspection Railcar Mover Facilities Equipment Real Estate Available BIDS DUE: September 28 th Romulus, Michigan HIlCo Industrial is a division of Hilco Global Headquarters 5 revere drive, ste. 206 Northbrook, Il all rights reserved Printed in usa lee4435 Il license # Please visit our website at to review our complete terms and conditions. Follow Us on: A Hilco Global Company Vested in Your Success
PUBLIC AUCTION th Street Hammond, Indiana Thursday, December 15, Let Our Experience Be Your #1 Asset TM DATE TIME LOCATION
PUBLIC AUCTION Surplus to the Ongoing Needs of a Major Metal Framing Company 1994 1987 3 available StriliCH/taylOR WINFielD 72 coil build-up/weld line STAMCO 72 injector head type slitting line 72 x 10,000
More information20,000 lbs. x 48" wide x.048" Thick "Panther" Cut-To-Length Line
20,000 lbs. x 48" wide x.048" Thick "Panther" Cut-To-Length Line GENERAL SPECIFICATIONS: Coil weight: 20,000 lbs. maximum Coil width: 24" - 48" Coil O.D.: 60" maximum Material type: Electro-Galvanized
More informationSTAINLESS SALES CORPORATION
PUBLIC AUCTION Large Capacity Stainless Steel Service Center By Order of Michael J. Eber, not Individually, but Solely as the Assignee for the Benefit of Creditors of Stainless Sales Corporation: STAINLESS
More informationWEBCAST/ONSITE AUCTION
Industrial HilcoTM WEBCAST/ONSITE AUCTION Late Model Steel Fabrication Facility Specializing in the Manufacture of High Specification Pressure Vessels, Modules & Tanks OVER 1000 LOTS! New Cost Over $275,000
More informationAMERICAN TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508
AMERICAN 255-76TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508 MODEL 60 REELS 1,000 Lbs. Capacity MODEL 60 MODEL 60-10 M- Motorized 60-10 NM- Drag Brake WIDTHS- 18" and 24" EXP. RANGE- 14" to 21" MAX. COl
More informationLIVE ONSITE & WEBCAST AUCTION
LIVE ONSITE & WEBCAST AUCTION COMPLETE PLANT CLOSURE OF STEEL BEAM AND STRUCTURAL STEEL MANUFACTURING COMPANY By Order of the Court Appointed Receiver The Audette Group LLC 11 Helmsman Avenue, North Kingstown,
More informationLate Model Brass Mill Fully Integrated
Late Model Brass Mill Fully Integrated for manufacturing of Coil Stock Rolling Mill Plant Casting Plant Available for purchase as a going concern *OWNER FINANCING AVAILABLE* Late Model Complete Copper
More informationHeatExchanger & IndustrialRadiator INDUSTRIAL RADIATOR MANUFACTURER
HilcoTM WEBCAST/ONSITE AUCTION As Authorized by the Company Assets No Longer Required to the Ongoing Operations HeatExchanger & Radiator manufac turer INDUSTRIAL RADIATOR MANUFACTURER OVER (400) Lots Featuring
More informationThursday, September 10, $26 Million Replacement Cost. Let Our Experience Be Your #1 Asset TM DATE TIME LOCATION
COMPLETE LATE MODEL ALUMINUM INGOT CASTING, HOMOGENIZING & PROCESSING FACILITY 3 AVAILABLE 2004 90,000 LB CAPACITY CANEFCO homogenizing batch furnace SECO/WARWICK melting furnace 2 AVAILABLE 100 HP - 48"
More informationONLINE AUCTION. Clark, New Jersey. Online Bidding Opens: Friday, February 14 th
ONLINE AUCTION 316 Stainless Steel Reactors, Processing Vessels and Storage Tanks Most are Agitated. Agitation includes Triple, Double & Single Motion and High Speed Dispersion Blades. Many are Scraped
More informationHIGH SPEED AND AUTOMATIC SLITTING LINE Model: ZJX0.5-4X1600
HIGH SPEED AND AUTOMATIC SLITTING LINE Model: ZJX0.5-4X1600 I. Main technical Parameters: Steel coil parameters Slitter parameters Material Tensile strength Steel thickness Steel width Steel coil I.D Steel
More informationPlant Closed Eco-Tech Plastics, LLC 1956 S. Pine Street Burlington, Wisconsin Miles North of Chicago
Complete Profile Extrusion Plastic Lumber Manufacturing and Plastic Recycling Facility Including (12) Extrusion Lines to 6, Grinders to 150-HP, Material Handling Equipment, Fork Lifts, Shop and Support
More informationPh: 1-(800) or (204) Fax: (204) Website:
JUST ARRIVED! Sahinler Press Model AP 1520-150 165 Ton Pressing Force 12 Stroke 60 Working Width 3/8 Bending Capacity (Punch and 4 Way Die Included) 24 x 60 Bed Area 15 HP Motor 220/3/60 New sells for
More informationCoil Lifters and Upenders
Model 82-NC Narrow Coil C Hook Handles narrow coils with less coil edge damage. More durable than web slings. Light weight for easier handling. Built in guide handle for ease of coil positioning. Available
More informationPARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA
PARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA 2 A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationFABRICATING & STAMPING MACHINERY Excess Inventory of CFM CORPORATION. Auction Date: Thursday, October 16th, 2008, at 10:30 a.m.
AUCTION SALE FABRICATING & STAMPING MACHINERY Excess Inventory of CFM CORPORATION 1000 E. Market Street, Huntington, Indiana Auction Date: Thursday, October 16th, 2008, at 10:30 a.m. Inspection Dates:
More informationSpaceMaster Compact Coil Lines
Coe Press Equipment Corporation SpaceMaster Compact Coil Lines Coe Press Equipment Corporation The Company That Feeds an Industry Coe Press Equipment Corporation SpaceMaster Series 1 Compact Coil Lines
More informationSlitter Rewinders.
TM Slitter Rewinders Dusenbery has set converting industry standards for quality, performance and productivity for over six decades. Our latest line of MasterSlit slitter rewinders continues this tradition
More informationZenith Auction & Realty, Inc.
AUCTION SATURDAY, APRIL 18, 2009 9:00 A.M. 3719 Madison Hwy. (I-75 Exit 11 - GA Hwy. 31) Valdosta, Georgia 3.22 ± ACRES + Shop, Vehicles & Equipment Zenith Auction & Realty, Inc. Donald Patten, CAI, Auctioneer
More information.com. INDUSTRIAL DIVISION. January 22, stoneauctioneers.com.
MyEquipAuctions www.myequipauctions.com INDUSTRIAL DIVISION.com January 22, 2018 www.stoneauctioneers.com stoneauctioneers.com https://www.bidspotter.com/en-us/auction-catalogues/stone?utm_source=heartland-imt&utm_medium=digitalad&utm_campaign=imt_coopmea_
More informationThe Caldwell Group Fax
Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.
More informationHOOD ASSEMBLY (Figure 1-1)
HOOD ASSEMBLY (Figure 1-1) 1-2 2005 HYSTER COMPANY 06/2005 UNIT CODE L177 EUROPE HOOD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 1 b 1589667 Hood Assembly (Low Noise)... 1 1 c 1543994 Hood Assembly (Standard)...
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationGLOBAL ONLINE AUCTION
GLOBAL ONLINE AUCTION First In A Series of Global Online Auctions Quality Machine Tool and Facility Support Assets Excess To The Needs Of Aerojet Rocketdyne A Global Leader In Aerospace and Defense From
More informationGP-EC. PNEUMATIC TIRE TRUCKS 30,000 33,000 36,000 lbs
GP-EC PNEUMATIC TIRE TRUCKS 30,000 33,000 36,000 lbs Yale GP-EC Series The Yale GP300-360EC pneumatic tire series of lift trucks provides low fuel consumption while delivering a capable truck that exceeds
More informationSLITTING AND CUT TO LENGTH LINE Model: ZJX0.5-5X1600 Main technical Parameters: No. Name Unit Parameters 1 Control model Frequency conversion control
SLITTING AND CUT TO LENGTH LINE Model: ZJX0.5-5X1600 Main technical Parameters: No. Name Unit Parameters 1 Control model Frequency conversion control 2 Materials CRS/HRS(1-4mm)SS(1-3mm) Number of slitting,
More informationTHURSDAY, AUGUST 31, 2017 *** 11:00 A.M. EDT *** WELCOME TO THE AUCTION SALE OF TERMS & CONDITIONS
THURSDAY, AUGUST 31, 2017 *** 11:00 A.M. EDT *** WELCOME TO THE AUCTION SALE OF SURPLUS ASSETS OF A LARGE CO-PACKER 373 MUNSTER AVENUE, TORONTO, ONTARIO, CANADA, M8Z 3C8 TERMS & CONDITIONS THIS SALE WILL
More informationTechnical Guide. Heavy-Duty Forklift Truck
Technical Guide Heavy-Duty Forklift Truck H190-280HD 2 DIMENSIONS 4-21 Equal intersecting right angle aisle with 48" (1219 mm) forks and 67" (1702 mm) wide x 72" (1829 mm) long load: H190HD 2 140 (3545)
More informationPICARD MÉTAL GROUP LARGEST SCRAP EVENT OF THE YEAR! MARK YOUR CALENDARS! PUBLIC AUCTION. 750 Grand Rang St-François Saint-Pie, QC J0H 1W0
MARK YOUR CALENDARS! PUBLIC AUCTION PICARD MÉTAL GROUP 2006 5 AVAILABLE HUGE QTY AVAILABLE LIEBHERR 924B material handler with grapple & magnet Partial view of roll off bins NEW AS 2013 20+ AVAILABLE ATM
More informationHigh Capacity Forklift Trucks AL WALID EQUIPMENT RENTAL LLC H16-18XM-12, H16-18XMS mm
Contact Number : +971 50-2174706 AL WALID EQUIPMENT RENTAL LLC www.walideqp.com High Capacity Forklift Trucks H16-18XM-12, H16-18XMS-12 16 000 18 000 kg @ 1200 mm Built on Experience H16-18XM(S) Development
More informationCUSTOMIZED MODULAR ROLL STANDS
CUSTOMIZED MODULAR ROLL STANDS SOLUTION SERIES Complete, pre-configured solutions for custom modular roll stands, nip / pull roll stations and slitting stations retrofitted for existing machines or as
More informationCOMPLETE LATE MODEL FABRICATING FACILITY AUCTION CONDUCTED BY:
PUBLIC AUCTION WEENING BROTHERS MANUFACTURING INC. MARK YOUR CALENDARS! Tuesday, June 12, 2018 10:30 A.M. EDT 33475 Hwy 88, RR #1, Bradford, Ontario, L3Z 2 INSPECTION: Monday, June 11 from 9:00 A.M. to
More informationHydraulics & Controls
Hydraulics & Controls Contract end Date 10-31-17 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc
More informationFREE STANDING WORK STATION JIB CRANE
SECTION 14661 FREE STANDING WORK STATION JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and
More informationGLOBAL ONLINE AUCTION
GLOBAL ONLINE AUCTION Concord, NC September 26th - 30th, 2015 Major Global Online Auction of Construction, Earth Moving & Rolling Stock Assets From 2 Sites On Behalf of Utilipath ASSET ADVISORY & AUCTION
More informationLPG Forklift Trucks Capacity 3000, 3500, 4000 and 4500 lb H16CT, H18CT, H20CT, and H20CT-600 SERIES 391
LPG Forklift Trucks, 5, and 5 lb H16CT, H18CT, H2CT, and H2CT-6 SERIES 91 Safety Linde ProtectorFrame: The overhead guard and its supporting frame form a strong and completely enclosed protective zone
More informationNo bid will be allowed to be modified in any way after the deadline for the opening.
LaSalle County Highway Department LAWRENCE J. KINZER, COUNTY ENGINEER 1400 N. 27 TH ROAD P.O. BOX 128 OTTAWA, IL 61350 PHONE (815) 434-0743 FAX (815) 434-0747 Website: www.lasallecountyhighway.org e-mail:
More informationAUCTION: Wednesday February 8, 11:00 AM View of 2. Sheet Metal & HVAC Fabrication Equipment
B&B Trade Distribution is phasing out of the manufacturing of metal products to focus on their core business of HVACR product distribution B&B Trade Distribution Sheet Metal & HVAC Fabrication Equipment
More informationGP DC. Counterbalanced Forklift Trucks. 19,000 / 21,000 / 23,000 / 25,000 / 28,000 lbs.
GP190-280DC Counterbalanced Forklift Trucks 19,000 / 21,000 / 23,000 / 25,000 / 28,000 lbs. Optimal productivity with low fuel consumption Outstanding maneuverability to meet the demands of tough application
More informationWEBCAST/ONSITE AUCTION
Industrial HilcoTM WEBCAST/ONSITE AUCTION By Order of Trustee In Bankruptcy Court Approved Sale of Trendway Transporation Services Inc. Heavy Haul Transportation & Trucking Highway Tractors, Floats, Roll-Tite
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (
More informationWELL MAINTAINED VEHICLES & EQUIPMENT FROM LOCAL MUNICIPALITIES. Roller & Associates, Inc.
7500 York Street Denver, Colorado 80229 WEDNESDAY FEBRUARY 11th 9:00 A.M. Inspection: Monday, February 9th & Tuesday, February 10th from 8:15 a.m. to 4:45 p.m. WELL MAINTAINED VEHICLES & EQUIPMENT FROM
More informationJune COIL Handling & Processing Equipment
June 2018 COIL Handling & Processing Equipment MECON INDUSTRIES LTD Mecon is a leading manufacturer of coil processing and handling equipment, brake press tooling and special purpose machines. From our
More informationCoil Handling & Press Feeding Equipment
Coil Handling & Press Feeding Equipment Yesterday s integrity. Tomorrow s technology. Corporate Overview Since 1966, CHS Automation has been aiding the metal forming industry by providing a productive
More informationLPG Forklift Trucks Capacity 3000, 3500 and 4000 lb H16CT EVO, H18CT EVO, H20CT EVO, H20CT-600 EVO
LPG Forklift Trucks Capacity 3000, 3500 and 4000 lb H16CT EVO, H18CT EVO, H20CT EVO, H20CT-600 EVO SERIES 391 Safety Linde ProtectorFrame: The overhead guard and its supporting frame form a strong and
More informationServices. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
More informationAutomation Systems. Products and Solutions for Assembly
Automation Systems Products and Solutions for Assembly About ASG We are personally committed to understanding and exceeding the requirements of our internal and external customers and all other interested
More informationHUGE OFFERING OF FABRICATION & METAL BUILDING MANUFACTURING EQUIPMENT
LIVE ON-SITE & WEBCAST AUCTION Thursday, May 28th, 2009 Beginning at 10:00am PDT Auction Location:, 530 So. Tegner Road, Turlock, CA 95380 530 So. Tegner Road Turlock, CA 95380 May 27 at 9am to 4pm PDT
More informationCounterbalanced Forklift Trucks
GP300-360EC Counterbalanced Forklift Trucks 30,000 / 33,000 / 36,000 lbs. Optimal productivity with low fuel consumption Outstanding maneuverability to meet the demands of tough application in lumber,
More informationMAJOR AUTOMOTIVE STAMPING FACILITY AUCTION CONDUCTED BY:
PUBLIC AUCTION Surplus Assets of LEXINGTON METAL SYSTEMS, LLC Tuesday, June 26, 2018 10:30 A.M. EDT MARK YOUR CALENDARS! INSPECTION: Monday, June 25 from 9:00 A.M. to 5:00 P.M. & morning of auction to
More informationHURON MOLD AND TOOL. CNC Tool & Die Facility. 15 Cope Court, Guelph, Ontario
2008 CNC VERTICAL MACHINING CENTERS CLARK 15,000 LB CAPACITY, MODEL C500Y150 YALE 7,100 LB CAPACITY, MODEL GLC080VXNGSE088 2003 HURON MOLD AND TOOL CNC Tool & Die Facility VEHICLES SUPPORT EQUIPMENT HYDRAULIC
More informationWEBCAST/ONSITE AUCTION By order of US Bankruptcy Court District of South Carolina, Case # HB
Industrial HilcoTM WEBCAST/ONSITE AUCTION By order of US Bankruptcy Court District of South Carolina, Case #13-07552-HB Thermo Striping Trucks, Adhesive Trucks, Mounted Attenuated Trucks & Related Pavement
More informationDesign standards used : CMAA, CSA, AIST, AISE, OSHA, FEM, HMI, CWB, AWS, ANSI, ASME, ASTM, AGMA, NEC, NEMA, IEEE, UL, ISO
Through innovation and cutting-edge technology, provide sound engineering solutions while improving equipment efficiency, reliability, and safety. Achieve the highest level of customer satisfaction throughout
More informationTWO OF FOUR MAJOR PUBLIC AUCTIONS
TWO OF FOUR MAJOR PUBLIC AUCTIONS By Order Of The Receiver For Royal Oak Industries Inc.: Royal Oak Boring (Port Huron MI) & Bronson Precision Products (Bronson MI) World-Class High Precision CNC Machining
More informationEQUIPMENT LIST. Square Footage: Main Plant = 96,850 South Building = 12,600. Main Plant. South Bldg
Main Plant South Bldg EQUIPMENT LIST Square Footage: Main Plant = 96,850 South Building = 12,600 2411 Walker Avenue, N.W. Grand Rapids, Michigan, USA 49544-1301 Phone: (616) 453-5471 Fax: (616) 453-3765
More informationBettis GC01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Actuator Torque Chart Metric
Product Data Sheet VA-DC-000-0218 Rev. 1 Bettis GC01- Extension Series June 2017 Bettis GC01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Chart Metric Copyright Emerson. The information
More informationFOR SALE BY PRIVATE TREATY
KME LOCSA, CORDOBA SPAIN FOR SALE BY PRIVATE TREATY Coils, Sheets and Strips Max Width 1.050 mm Thickness Range 0,2 5 mm Max Output: 35.000 ton per year Oranje Nassaulaan 69 1075 al AMSTERDAM The Netherlands
More informationFea. Diesel and LPG Forklift Trucks Capacity 3000, 3500 and 4000 lb H16D/T, H18D/T, and H20D/T SERIES 391
(1) -1- S91Pneu092608_Rev01.indd 9/26/2008 2:19:1 PM Fea O L Diesel and LPG Forklift Trucks 000, 500 and 4000 lb H16D/T, H18D/T, and H20D/T SERIES 91 Safety Linde ProtectorFrame: The overhead guard and
More informationBettis G01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Actuator Torque Chart Imperial
Product Data Sheet VA-DC-000-0214 Rev. 1 Bettis G01-Extension Series June 2017 Bettis G01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Actuator Chart Imperial Copyright Emerson. The
More informationIndiana University of PA: Vehicles, Mowers, Trailers & More
Auctions By Gov (855) 723-7781 customercare@ritchiebros.com http://auctionsbygov.com Indiana University of PA: Vehicles, Mowers, Trailers & More Description Vehicles, mowers, trailers and more are offered
More informationHydraulics & Controls
Hydraulics & Controls Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc
More informationPUBLIC AUCTION. Wednesday, November 21, :30 A.M. EST 581 Rivermede Road Concord, Ontario L4K 2G8. Let Our Experience Be Your #1 Asset TM
PUBLIC AUCTION Almore Trading & Manufacturing Company Limited O/A Crown MeTAl trucks new as 2006 5 available Partial view of lugger & roll off trucks 100 hp 1996 2007 INTernATionAL PRESS & SHEAR hydraulic
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationHYUNDAI PRODUCT LINE GUIDE
HYUNDAI PRODUCT LINE GUIDE Hyundai Forklift Trucks From our North American headquarters and parts depot located in suburban Atlanta, we provide dealer and product support, warranty administration, technical
More informationHIGH-CAPACITY ELECTRIC CUSHION
HIGH-CAPACITY ELECTRIC CUSHION 15000 40000 LBS. SPECIFICATIONS THDE1500-4000-24 THDE3000-4000-30 CLASS 1 ELECTRIC MOTOR RIDERS ToyotaForklift.com HIGH-CAPACITY ELECTRIC CUSHION CAPACITY 15000 40000 LBS.
More informationWYDB60FS691V34 WYDB60FS691V34CA WYDB52FR691V32CA WYDB52FX691V34CA WYDB60FX691V34 WYDB60FX691V34CA PARTS MANUAL
WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA WYDB60FX691V34
More informationTechnical Specifications
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach
More informationGlobal King. Monorail Hoists
Global King Monorail Hoists Capacities from 1 to 15 ton TM Yale Global King monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing
More informationManufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment
Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment Where superior duct work begins. The Vicon line of HVAC Rollforming and Sheet Metal Equipment is the industry proven solution for all
More informationBIG TRUCKS FORGED IN AMERICA High-Capacity Cushion & Pneumatic Tire Liftrucks
BIG TRUCKS FORGED IN AMERICA High-Capacity Cushion & Pneumatic Tire Liftrucks BIG TRUCKS FORGED IN AMERICA The BIG TRUCK experts, Hoist Liftruck is a U.S. manufacturer of high-capacity liftrucks ranging
More informationBrake Systems Application Guide INDEX BRAKE SUMMARY AND KEY FEATURES 3 TYPICAL DESCRIPTION AND APPLICATIONS HYDRAULIC BRAKES 4-7
INDEX INTRODUCTION BRAKE SUMMARY AND KEY FEATURES 3 TYPICAL DESCRIPTION AND APPLICATIONS HYDRAULIC BRAKES 4-7 TYPICAL DESCRIPTION AND APPLICATIONS ELECTRIC BRAKES 8 BRAKE CALCULATIONS SELECTING BRAKE TORQUE
More informationThe Caldwell Group Fax
Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.
More informationWinding solutions for all your web handling needs.
T I D L A N D W I N D I N G P R O D U C T S Winding solutions for all your web handling needs. T A B L E O F C O N T E N T S Introduction.................................... 2-3 Standard Air Shafts (Pad,
More informationPlant Closed DILWORTH MACHINE. 600 Cherry Fork Ave. Leetonia, Ohio (20 Miles South of Youngstown, Ohio)
LATE MODEL CNC AND MANUAL MACHINING FACILITY INCLUDING CLAUSING 5000MT CNC TURNING CENTER, VMC S, SLANT BED TURNING CENTERS, 36 X 168 AMERICAN PACEMAKER LATHE, 5 LUCAS AND 4 G & L BORING MILL, BLAST CABINET,
More informationTechnical Guide. Heavy-Duty Forklift Truck
Technical Guide Heavy-Duty Forklift Truck H300-360HD 2 DIMENSIONS 4-21 Equal intersecting right angle aisle with 76" (1930 mm) wide x 72" (1829 mm) long load: H300HD 2 155 (3936) H330HD 2 155 (3936) H360HD
More informationVEHICLE RESEARCH & DEVELOPMENT
ONLINE AUCTION Vehicle Testing & Research Facility By Order of the U.S. Bankruptcy Court (E.D. Mich.-Flint) in the Matter of Vehicle Research and Development, Inc. VEHICLE RESEARCH & DEVELOPMENT 3863 Van
More informationDifferential Rewind Shafts
Differential Rewind Shafts More accurate tension control for light tension applications. Dynamically balanced central shaft. Suitable for cardboard and all types of plastic cores. Easier loading of cores
More informationBID FOR ONE (1) 1 TON CREW CAB TRUCK WITH SERVICE BODY OPENING APRIL 11, 2019 AT 10:00 A.M.
P. O. B o x 1 5 4 0 T h o m a s v i l l e, G A 3 1 7 9 9 2 2 9-2 2 7-7 0 0 0 F A X 2 2 9-2 2 7-3 2 4 3 w w w. t h o m a s v i l l e. o r g BID FOR ONE (1) 1 TON CREW CAB TRUCK WITH SERVICE BODY OPENING
More information1997 F350 Diesel 4x4 Service Manual READ ONLINE
1997 F350 Diesel 4x4 Service Manual READ ONLINE 1997 Ford F350 PowerStroke Diesel Dually w 2006 FORD F350 XL FX4 DIESEL 4X4 6SPEED MANUAL 4X4 turbo diesel 6spd manual 4x4 Extended DRW 2-owners PRINT this
More information15,500 lb Capacity Diesel Pneumatic Tire Lift Truck
15,500 lb Capacity Diesel Pneumatic Tire Lift Truck XX More Power To You Count on rugged Cat lift trucks for the high performance, dependability, and comfort you need to sustain productivity and maximize
More informationBIG TRUCKS FORGED IN AMERICA High-Capacity Cushion & Pneumatic Tire Liftrucks
BIG TRUCKS FORGED IN AMERICA High-Capacity Cushion & Pneumatic Tire Liftrucks BIG TRUCKS FORGED IN AMERICA The BIG TRUCK experts, Hoist Liftruck is a U.S. manufacturer of high-capacity liftrucks ranging
More informationAuction: Thursday May 8, 10:30 am ET Inspection: Wednesday May 7, 9am-4pm ET
COURT AUTHORIZED SALE DELHI SOLAC Steel Tube Manufacturing Facility 65 Waverly Street, Delhi (London), Ontario, Canada Includes UV Station Large Qty of Mill Dies Available 2003 B&K TUBE MILL #2 B&K TUBE
More informationSTRONG PARTNERS. TOUGH TRUCKS. TM HIGH CAPACITY FORKLIFT TRUCKS H8-12XM-6, H13-16XM mm STAGE IIIB
STRONG PARTNERS. TOUGH TRUCKS. TM HIGH CAPACITY FORKLIFT TRUCKS H812XM6, H1316XM6 STAGE IIIB 8 16 kg @ 6mm H816XM6 DISTINGUISHING MARKS 1.1 Manufacturer 1.2 Manufacturer s type designation 1.3 Drive: electric
More informationECO-TECH PLASTICS, LLC
COMPLETE PROFILE EXTRUSION PLASTIC LUMBER MANUFACTURING AND PLASTIC RECYCLING FACILITY INCLUDING (12) EXTRUSION LINES TO 6, GRINDERS TO 150-HP, MATERIAL HANDLING EQUIPMENT, FORK LIFTS, SHOP AND SUPPORT
More informationCHANDLER LOW PROFILE
CHANDLER LOW PROFILE ORCHARD AND GROVE PULL-TYPE FERTILIZER AND LIME SPREADER (Unit Shown W/PTO Drive Spinners) Hopper Specifications 3-Ton Capacity (Fertilizer) 5-Ton Capacity (Lime) Available In: 304
More informationHoists & Rigging Products for Construction Projects
Manual Hoists Have a special application? Our full line of material handling products allows us to create complete solutions rather than just offering single products. Now you have one point of contact
More informationDMC complete tube mills with INLINE UV COATING & END BEVELING SCARF EQUIPMENT, (50) sets of tooling and large qty. of spare parts
PUBLIC AUCTION Surplus to the Ongoing Needs of a Large Steel Tube MANUFACTURER 2000 2 COMPLETE 4.5 and 2.375 TUBE MILLS available DMC complete tube mills with INLINE UV COATING & END BEVELING SCARF EQUIPMENT,
More informationGeneral Machinery & Equipment Listing This is not the sale catalog, the sale catalog will post on Bidspotter Monday, March 17 9 AM
General Machinery & Equipment Listing This is not the sale catalog, the sale catalog will post on Bidspotter Monday, March 17 9 AM SHEAR: Pearson 10 x ¼ Hydraulic Shear, SN 5194-6 PRESS BRAKE: Daisa Hydraulic
More informationDIESEL FORKLIFT TRUCKS
RATED OUTPUT Gross: 129 kw 173 HP / 2200 min-1 Net: 122 kw 164 HP / 2200 min-1 Gross: 165 kw 221 HP / 2200 min-1 Net: 154 kw 207 HP / 2200 min-1 CAPACITY - 25000 FD 250 DIESEL FORKLIFT TRUCKS Photos may
More informationIC-PNEUMATIC CQ20/25/30. Diesel or LPG engine Pneumatic Tires CQ20 CQ25 CQ kg 2500 kg 3000 kg CLARK THE FORKLIFT. Europe.
IC-PNEUMATIC CQ20 CQ25 CQ30 Diesel or LPG engine Pneumatic Tires CQ20/25/30 2000 2500 3000 CLARK THE FORKLIFT Europe North America South Korea w w w. c l a r k m h e u. c o m CQ20/25/30 DIMENSIONS A st
More informationARCHITECTURAL WINDOW & DOOR GLAZING SYSTEM FACILITY
Surplus To The Ongoing Operations Of: 250 Bowes Road, Concord, Ontario, Canada ARCHITECTURAL WINDOW & DOOR GLAZING SYSTEM FACILITY 2007 1999 HACO HSLX 3606 HYDRAULIC SHEAR 12 ft x ¼" Hydraulic Clamping
More informationStand-Up Counterbalanced Truck Models 4150 and 4250: Specification Sheet
Stand-Up Counterbalanced Truck Models 4150 and 4250: Specification Sheet Models 4150 and 4250 Trucks: What Excellence Looks Like Maneuverable Durable Innovative. The Models 4150 and 4250 represent true
More informationHIGH VOLTAGE HP Water Cooled Dynamometer Calibrated Load Cell, Precision Control and Instrument Package
HIGH VOLTAGE Our new 105,292 sq.ft. Repair, Manufacturing & Distribution Facility: Superior Central Phoenix Location & Highway Access 1881 East University Drive, Phoenix, AZ 85034 8.7 Acres Located in
More informationPARTS MANUAL EE60FX730V34CA EE52FX691V34CA
PARTS MANUAL EE48FR691V32 EE48FR691V32CA EE60FX730V34 EE60FX730V34CA EE52FR691V32 EE52FR691V32CA EE52FX691V34 EE52FX691V34CA 2 WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255
More informationH /48HD 2, H HD 2 SERIES TECHNICAL GUIDE
H210-250/48HD 2, H300-360HD 2 SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 4-1 4-1 CENTER OF GRAVITY 4-5 4-2 4-7 1-5 4-12 4-22 4-31 4-32 4-22 1-6 1-8 4-19 4-20 1-9 4-16 = Center of gravity of unladen
More informationH HD 2 SERIES TECHNICAL GUIDE
H190-280HD 2 SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 4-1 4-1 CENTER OF GRAVITY 4-5 4-2 4-7 1-5 4-22 4-12 4-22 1-6 4-31 1-8 4-19 4-32 4-20 1-9 4-16 = Center of gravity of unladen truck a/2 l x
More informationUS Import & Distribution. Electric Man Up - Multi-directional Forklift High tech solutions, quality and innovation.
US Import & Distribution Electric Man Up - Multi-directional Forklift High tech solutions, quality and innovation. PK Series 4400-7700 lbs Battioni Pagani Group combines two independent privately held
More informationDiesel Forklift Trucks 13,000 to 17,500 lbs. Capacity H60D, H70D, H80D, H80D-900, and H80D-1100
Diesel Forklift Trucks 13, to 17,5 lbs. H6D, H7D, H8D, H8D-9, and H8D-11 SERIES 396-2 Safety With full loads weighing as much as 175 lbs. at 43 load center and full capacity up to 256 of lift height safety
More information