STAINLESS SALES CORPORATION

Transcription

1 PUBLIC AUCTION Large Capacity Stainless Steel Service Center By Order of Michael J. Eber, not Individually, but Solely as the Assignee for the Benefit of Creditors of Stainless Sales Corporation: STAINLESS SALES CORPORATION THEATER STYLE AUCTION: Thurs. February 2nd 10:00 am CST at 2301 W. Windsor Ct., Unit B Addison, Illinois INSPECTION: Wednesday, February 1st 9:00 am - 4:00 pm CST (3) Locations: Addison, IL 3301 S. Justine St., Chicago, IL 2310 W. 58th St., Chicago, IL Slitting Lines Cut-to-Length Lines Edging Lines Coil Banding Line Up-Ender Core Cutter Ironworker Fabricator Shears Saws Scales Stretch Wrappers Air Compressors Manlift Material Handling Equipment Much More! Skive/Edge/Oscillate 66 x 10,000 lb. 60 x x Precision Blanking Bid On Site in Addison, IL or Online at 30,000 lb. Buyer s Premium 15% Onsite, 18% Online 105 Revere Drive, Suite C Northbrook, Illinois Phone: sales@pplauction.com Hannan Road Wayne, Michigan Phone: machking@galcorp.com PPL License No David Muslin License No Joel Bersh License No Michael L. Ackerman License No

2 New 2003 Chicago 60 x.250 x 60,000 lb. Triple Injector Head Loop Slitting Line New 2003 ATTEND or BID ONLINE at SLITTING LINE Chicago 60 x.250 x 60,000 lb. Triple Injector Head Loop Slitting Line: 10, 8 & 7 Arbor Diameters, Thickness Range, (11) Cuts of.250, with 4-Arm Entry Turnstile (New 2003), L-Type Coil Car (New 2003), Braner Mandrel Uncoiler with Hydraulic Expansion and Sliding Base, Peeler Pinch Rolls, Entry Crop Shear with Edge Guides, (3) Injector Slitter Heads with 10, 8 & 7 Dia. Arbors, Hydraulic Locking, 200 HP Slitter Head Drive, Looping Pit Cascade Rolls & Cross-Over Table, (2) Scrap Winders, Tension Stand, Exit Crop Shear, Recoiler with 16 & 20 Hydraulic Drum, Hydraulic Outboard Bearing Support, 150 HP Motor, Exit L-Type Coil Car (New 2003), Exit 4-Arm Turnstile with Hydraulic Push-Off, Shimless Tooling, Siemens Digital Drives, Allen Bradley PLC (Justine) 2

3 Cincinnati Design 60 x.250 x 30,000 lb. Loop Slitting Line Forte 48 x.135 x 20,000 lb. Pull-Through Slitting Line SLITTING LINES Cincinnati Design 60 x.250 x 30,000 lb. Loop Slitting Line: (2) Heads, 8 Diameter Arbors, with Entry L-Type Coil Car, Mandrel Uncoiler with Hydraulic Expansion and Hold Down Roll, Paper Unwinder, PVC Applicator System, Powered Pinch Rolls, Peeler Table, Pinch Rolls, Crop Shear, (2) Slitting Heads with 8 Dia. Arbors, Outboard Slide into 36, Hydraulic Arbor Adjustment, 150 HP Slitter Drive, (2) Scrap Winders, Pit Cross-Over Table, Rotary/Drag Board Tension Stand, Water Cooled Brakes, Exit Crop Shear, Recoiler with Hydraulic Push-Off and Overarm Separator, 150 HP Motor, Paper Winder, Exit L-Type Coil Car, Tooling, Siemens Digital Drives (Addison) also: MES-SA 4-Arm 30,000 lb. Exit Turnstile, Hydraulic Rotation, Hydraulic Push-Off (Addison) Forte 48 x.135 x 20,000 lb. Pull-Through Slitting Line: 5 Diameter Arbors, Thickness Range, with Mandrel Uncoiler, Powered Hold Down Roll, Hydraulic Expansion, Sliding Base, Slitter Head with 5 Diameter Arbors, Sliding Outboard for Narrow Heavy Gauge Cuts, Edge Guides, Scrap Winder, Recoiler with AC Inverter Drive, Exit Turnstile with Push-Off, Tooling, Electrics, Hydraulics and Controls (Justine) 12 x.062 x 6000 lb. Pull-Through Slitting Line (Addison) Amermac Rubber Ring Shaver Model 1100, S/N 268-B (Justine) 3

4 60 x.105 x 25,000 lb. Cut-to-Length Line Paxson 36 x.078 x 30,000 lb. Precision Loop Cut-to-Length Line CUT-TO-LENGTH LINES 60 x.105 x 25,000 lb. Cut-to-Length Line with Herr Voss 6-HI Leveler Model 72/ /7-6HI-LH: Thickness Range, with L-Type Coil Car, Mandrel Uncoiler, Herr Voss 6-HI Leveler (S/N ), (19) Work Rolls, (7) Flights Top & Bottom Back-Ups with Motorized Adjustments, Allen Bradley Panelview Digital Readouts, Model 1500 PLC Controls, Threading Table, Looping Pit Table, Stamco Precision Roll Feed, Stamco High Speed Shear, 15 ft. Powered Belt Gauging Table, Strillich Stacker, Digital Readouts, Siemens Digital Drives and Controls, Spare Set of Rolls for the Leveler (Addison) Paxson 36 x.078 x 30,000 lb. Precision Loop Blanking Line: FPM Line Speed, Thickness Range, Cut Length, 5-36 Coil Width, with Braner 4-Arm Turnstile, Hydraulic Rotation, L-Type Coil Car, Mandrel Uncoiler, Sliding Base, Hydraulic Expansion, Water Cooled Brake, Hold Down Roll, Peeler Table, 17-Roll Precision Leveler, Diameter Work Rolls, 54 Roll Face, (7) Flights Top & Bottom Back-Ups, (5) Flights Individual Adjustment, Entry Pinch Rolls, 50 HP Drive, Looping Pit Cascade Rolls, Looping Pit Cross-Over Table, Precision Roll Feed with Entry Edge Guides, High Speed Shear, SPM, Air Clutch, 10,000 lb. Automatic Sheet Stacker, 24 Max. Stack Height, Scissor Lift Table, End Discharge Powered Run-Out Conveyor, Digital Drives with PLC Controls (58th Street) Raytech Measuring Systems 48 x 105 Portable Sheet Steel Precision Measuring Table Model 34078, S/N 63335, with Heidenhain Programmable DRO (Addison) 4

5 Stanat 12 x.090 Skiving/Edging Line Gauer 6 x.135 Coil to Coil Edging Line Lothor 6 x.125 Coil to Coil Edging Line 66 x 10,000 lb. Coil Banding Line EDGING LINES Stanat 12 x.090 Skiving/Edging Line with 2HI Mill: 1000 FPM Line Speed, with 4000 Powered Mandrel Uncoiler, Welding Station w/ TIG 175 Arc Welder, Precision Arc 250 Amp Arc Welder Model 262, 6-Roll Edging Station with 2HI Mill, (8) Skiving Knives, Entry Edge Guides, 3-Roll Tension Bridle, with 25 HP Motor, Powered Recoiler with Oscillating Wind, Sliding Base, 15 HP Drive, PLC Controls with Digital Readouts, Tooling, Electrics, Controls, Carbide Knives for Rounds, Squares & Shapes (can also do pancake rewind) (Addison) Gauer 6 x.135 Coil to Coil Edging Line with 2HI Mill: Thickness Range, with 3000 Mandrel Uncoiler, Gauer Model 9H10 Edger, 6 Roll Edging Dies, 3 Diameter Tooling, 8 x 8 2HI Rolling Mill, 2-1/2 x 10-3/4 Spare Set of Rolls, Recoiler with Overarm Separator, Single-Arm Exit Turnstile, Spare Tooling (Addison) Lothor 6 x.125 Coil to Coil Edging Line with 2HI Mill: Thickness Range, with 2000 Pay-Off Reel, (4) 6 Roll Edger with 3 Diameter Edging Dies, 8 x 8 2HI Rolling Mill, 2-1/2 x 10-3/4 Spare Set of Rolls, Recoiler with Overarm Separator, Single-Arm Exit Turnstile, Tooling, Controls (Addison) COIL BANDING LINE 66 x 10,000 lb. Coil Banding Line: Horn Type Coil Down-Layer, 20 ft. Powered Conveyor, Signode Banding Head & Table, Stacker Table, Coil Stacker (Addison) 5

6 New 2010 UP-ENDER CORE CUTTER IRONWORKER FABRICATOR SHEARS SAWS Advance Lifts 10,000 lb. Upender Model UE-1090, S/N 34769/1005 (Justine) Coil Tech 72 Long Max. Adjustable Programmable Cardboard Core Cutter, S/N EH (New 2010) (Justine) Peddinghaus 66 Ton Hydraulic Ironworker Model Peddimaster H, S/N , with Punching, Angle/Bar/Flat Shearing & Notching Capability (58th Street) Strippit Fabricator Model Super 30/30, S/N , 36 Throat, 48 x 72 Work Table, with Duplicator Bar (58th Street) Cincinnati 1/4 x 10 Shear Model 1810, S/N 33638, 58 Left Squaring Arm, 38 Support Arms, 36 Front Operated Power Back Gauge (Addison) Reliance Tool 72 Circle Shear Model CH727T, S/N C27401, Variable Speed Drive (58th Street) Whitney Jensen Rotary Shear Model 114, S/N 1633/70 (58th Street) Roll-In 12 x 12 Horizontal Band Saw Model HW1212, S/N J2009HW (New 2012), Vise, Semi-Automatic (Addison) Dayton 9 x 16 Horizontal Metal Cutting Band Saw Model 4YG31, S/N (Addison) Wellsaw Horizontal Band Saw Model 1318, S/N 4392 (Justine) Hitachi 10 Table Saw (Addison) SCALES STRETCH WRAPPERS AIR COMPRESSORS MANLIFT GSE 100,000 lb. Capacity Platform Scale Model 460, S/N (New 2004) (Addison) Loadmaster 100,000 lb. Above-Ground Scale with GSE 460 Controls, S/N (Addison) B-Tek 30,000 lb. Digital Coil Scale Model BT FESD HI, with GSE 350 DRO (Justine) Rice Lake 30,000 lb., 72 x 72 Below-Ground Coil Scale, with GSE Model 460 Controls (Justine) Muller Semi-Automatic Rotary Arm Pallet Stretch Wrapper Model Cobra Plus, S/N GH (disassembled, in crate) (Addison) ITW Mima Rotary Arm Pallet Stretch Wrapper Model Cobra III, S/N (New 1998), with Digital Scrap Count (Justine) Atlas Copco Rotary Screw Air Compressor Model GA30VSDFF, S/N AP , 3960 hours (Addison) Atlas Copco 30kw Rotary Air Compressor Model GA30VSD, S/N AP , Elektronikon Solid State Control (Justine) Kaeser 10 HP Rotary Air Compressor Model SM11, S/N (1996) (Addison) Ingersoll Rand 10 HP Horizontal Tank Mounted Reciprocating Air Compressor Model Century II, S/N 30T646428, 42 CFM, 110 PSI (Justine) Ingersoll Rand 2-Stage Reciprocating Air Compressor Model PL-510, S/N P21146T12 (Addison) Husky Postable Air Compressor Model , S/N (Addison) Zeks-Therm Air Dryer (Justine) Atlas Copco Oil Separator Model OSC 355 (Addison) Kaeser Refrigerated Air Dryer Model SM-11 (Justine) Genie 500 lb. Electric Manlift Model GS2632, S/N GS , 32 x 92 Platform with Slideout (Addison) BID ONLINE at 6

7 30,000 lb. 30,000 lb. 8 Forklifts Available New Ton New 2014 MATERIAL HANDLING EQUIPMENT Royal 30,000 lb. LP Forklift Model T300C, S/N L0534, Solid Rubber Tires, Overhead Guard, 127 Lift of 2-Stage Mast, Side Shift (58th Street) Hoist 30,000 lb. LP Forklift Model FKS15X, S/N 21310, Solid Tires, OH Guard, 99 2-Stage Mast, Fork Positioner, Beveled Coil Forks (Addison) Toyota 13,500 lb. LP Forklift Model 7FGCU60, S/N (New 2004), Non-Marking Solid Tires, OH Guard, Lift of 2-Stage Mast (Justine) Toyota 10,000 lb. LP Forklift Truck Model 7FGCU45-BCS, S/N (New 2007), Solid Tires, OH Guard, Stage Mast, Side Shift (Addison) Toyota 8000 lb. LP Forklift Model 7FGCU35, S/N (New 2004), Solid Rubber Tires, Overhead Guard, 120 Lift of 2-Stage Mast (Justine) Toyota 8000 lb. LP Forklift Model 7FGCU35, S/N (New 2004), Solid Rubber Tires, Overhead Guard, Stage Mast (Addison) Toyota 6000 lb. LP Forklift Model 7FGCU30, S/N (New 2006), Non-Marking Solid Tires, OH Guard, Lift of 2-Stage Mast (Justine) Toyota 5000 lb. LP Forklift Model 7FGCU30, S/N (New 2006), Solid Tires, Overhead Guard, Stage Mast, Side Shift (Addison) T&M Equipment 20 Ton x 70 ft. Span (est.) Double Girder Top Running Overhead Bridge Crane, S/N 74888, with 150 (est.) Self-Supporting Runway, Electrics, Radio Control (Justine) Sessco 15 Ton x 27 Span Double Girder Top Running Overhead Bridge Crane, S/N (New 2004) (Justine) 7-1/2 Ton x 40 ft. Stationary Gantry Crane (Addison) Gorbel 1/2 Ton x 6 ft. Column Mounted Jib (Justine) Abell-Howe 1/2 Ton Beam Mounted Jib, with Tool Balancer (Justine) 1 Ton x 10 Rails, with (2) Budgit Electric Chain Hoists (Justine) Big Joe 4500 lb. Capacity Walk-Behind Electric Pallet Lift Model WPT , S/N (New 2011), with On-Board Charger (Justine) Jib Rig Telescoping Forklift Fork Jib (Addison) (3) Assorted 20,000 lb. & 30,000 lb. Coil Hooks (Justine) Acco 2210 lb. Vacuum Sheet Lifter Model B16-N30, S/N A2380, with Pump & Pendant (58th Street) Caldwell 1400 lb. Vacuum Sheet Lifter Model D , S/N C-25208, w/ Pump (58th Street) Mechanical Manual Sheet Lifter (58th Street) MISCELLANEOUS EQUIPMENT Jet 2 Arm x 8 Column Radial Drill Model JRD-750, S/N , Power Elevation, 1500 RPM, T-Slot Base, Box Table (58th Street) Wilton 15 Floor Type Drill, S/N x 12 Combo Belt/Disc Grinder Baldor 10 Double End Pedestal Grinder (all 3 in Addison) Signode Bander (Addison) Factory Cat Floor Scrubber Model 350, S/N (New 2014), with Charger (Addison) Factory Cat Electric Walk Behind Floor Scrubber Model 30-C Magnum, S/N (New 2010), with Charger (Addison) Factory Cat Electric Walk Behind Sweeper Model 34 (Justine) Assorted Plant Support Equipment (Addison) 1000 (est.) of Lankhorst KLP Roll Stop System (Addison & Justine) Approx. (50) Kastalone 18 x 48 Molded Plastic Coil Pads (Addison) Hitachi 12 Bench Top Miter Saw with Gauge Table (Addison) Jet Vortex Cone Dust Collector (Addison) United Speedy Tester Bench Top Tensile Tester Model LCH-20, S/N (Justine) ITW Simco Charge Masters Model VCM 30-N, S/N (Addison) Mitutoyo Surftest Surface Tester Model SJ-210 (Addison) (12) Sections 108 W x 43 D x 12 H, (3) 8000 lb. Tier Adj. Pallet Rack, w/shelf Inserts Assorted Office Furniture (nearly new) (both in Addison) 7

8 105 Revere Drive, Suite C Northbrook, Illinois Stainless Steel Service Center PUBLIC AUCTION STAINLESS SALES CORPORATION SALE DATE: Thursday, February 2nd INSPECTION: Wednesday, February 1st 2301 W. Windsor Ct., Unit B Addison, Illinois :00 am CST 9:00 am - 4:00 pm ATTENTION: PLANT MANAGER OR MACHINERY BUYER 48 x x.105 PUBLIC AUCTION STAINLESS SALES CORPORATION SALE DATE: Thursday, February 2 10:00 am CST INSPECTION: Wednesday, February 1st 9:00am - 4:00pm Auction Terms & Conditions REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer s normal Terms of Sale, which are available at the site or by request at A 15% Buyer s Premium will be added to the final bid price. All bids are in US dollars. An 18% Buyer s Premium will be added to online bids. Your bid is a contract: Place a bid only if you re serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with PPL Auction. PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, Bank Check or Cashier s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subject to sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only. VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages. Buyer agrees to accept assets purchased per standard auction terms, AS IS, WHERE IS, WITH ALL FAULTS WITHOUT ANY REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIED REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicle to remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction has completed and payment in full has been made. ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser s address on file after payment is received and cleared. All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resold by auctioneer, any loss incurred in the resale to be borne by the original buyer. UNABLE TO ATTEND? Bid online in real time at ON-LINE BIDS SUBJECT TO 18% BUYER S PREMIUM Scan with your phone to link to our website 105 Revere Drive, Suite C Northbrook, Illinois Phone: sales@pplauction.com Hannan Road Wayne, Michigan Phone: machking@galcorp.com PPL License No David Muslin License No Joel Bersh License No Michael L. Ackerman License No