ONLINE PUBLIC AUCTION
|
|
- Sydney Pierce
- 5 years ago
- Views:
Transcription
1 ONLINE PUBLIC AUCTION By Order of the Owner INDUSTRIAL SURPLUS AND EQUIPMENT 418 HADLEY STREET HOLLY, MICHIGAN AUCTION STARTS: MONDAY, MAY 18, 2015 AUCTION ENDS: THURSDAY, MAY 21, 2015, BEGINNING AT 10:00 AM INSPECTION PREVIEW: TUESDAY, MAY 19, 2015 REMOVAL DATES: FRIDAY, MAY 22 ND THROUGH WEDNESDAY, MAY 27 TH. PLEASE NOTE THAT THE AUCTION SITE WILL ALLOW FOR PICK UP OVER THE MEMORIAL DAY WEEKEND. DIRECTIONS: FOLLOW I-75 NORTH TO EXIT #98, EAST HOLLY ROAD. PROCEED WEST FOR 3.8 MILES TO EAST MAPLE STREET (EAST HOLLY TURNS INTO EAST MAPLE). FOLLOW EAST MAPLE FOR AN ADDITIONAL 1.2 MILES TO SOUTH BROAD STREET. TURN LEFT ON SOUTH BROAD AND PROCEED 3/10 MILES TO HADLEY STREET. TURN LEFT ON HADLEY, PROCEED TO END OF STREET. TERMS OF SALE: All items being offered for sale will be offered in piecemeal. All sales are for CASH, CASHIER S CHECK, or COMPANY CHECK AND/OR WIRE TRANSFER ONLY WITH IRREVOCABLE UNQUALIFIED BANK LETTER OF AUTHORIZATION (the letter must conform to our example as shown). On the day of sale, you will be required to submit a deposit equivalent to no less than 25% of each item purchased at the time of purchase. Your entire account must be settled prior to the removal of any of your purchases. Please show this example of authorization to your banker. To: Williams & Lipton Company, Farmington, Michigan Mr. (Customer Name) of (Company Name) is a customer of this bank. This bank will guarantee irrevocable unqualified payment for full face value stated on this letter to Williams & Lipton Company for checks drawn on (account number) for an amount up to $.00. This letter is void after (date). This letter format also applies to all wire transfers. All items being offered as-is, where-is, with the only guarantee being that of good title. Other terms and conditions of sale may be added prior to sale. IMPORTANT NOTE: Although the information listed in this brochure has been obtained from informed sources deemed reliable, Williams & Lipton Company does not guarantee nor warrant the accuracy of the information herein contained. It is for this reason that potential buyers should inspect the property being offered for sale on the day of inspection listed in this brochure. The buyer does hereby assume and does agree to indemnify and hold the Auctioneer and Seller harmless from any future claim, which shall pertain to the fitness or use of that asset being purchased. A 16% BUYER S PREMIUM WILL APPLY. ITEMS ARE SUBJECT TO BE WITHDRAWN FROM SALE WITHOUT PRIOR NOTICE 1
2 AUCTIONEERS NOTE: AS AN AUCTION BUYER YOU ARE RESPONSIBLE FOR PICKING UP YOUR PURCHASES. YOU WILL NOT BE ALLOWED TO LEAVE BEHIND ANY PART OF A LOT THAT YOU PURCHASE. BUYERS SHOULD MAKE ARRANGEMENTS TO DISASSEMBLE AND TRANSPORT PURCHASES PRIOR TO THE AUCTION TO INSURE A SMOOTH TRANSACTION. AUCTIONEER DOES NOT ASSIST WITH REMOVAL OR TRANSPORT. PLEASE READ AND FAMILIARIZE YOURSELF WITH AUCTION TERMS PRIOR TO REGISTERING WITH AUCTIONEER, ESPECIALLY IF YOU HAVE NOT BEEN TO A WILLIAMS AND LIPTON AUCTION BEFORE. 2 Woodworking Equipment Powermatic-Houdaille Model 180; 18" Planer; S/n ; 18" Wide x 6" High Capacity; Baldor 3-HP x 3,450 RPM Motor; Powermatic-Houdaille Model 100; 12" Planer; S/n ; 12" Wide x 5" High Capacity; Baldor 1 1/2-HP x 1,725 RPM Motor; Powermatic Model 60; 8" Planer; S/n 8608; 8" x 64 3/4" Work Surface; Dayton 1-HP x 3,450 RPM Motor; Crescent 8" Planer; 8" x 50" Work Surface; Dayton 1-HP x 3,450 RPM Motor; No Identifying Name 20" Vertical Disc Sander; 10 1/2" x 27 1/2" Work Surface; Horse Power Inc. 3-HP x 1,745 RPM Motor; 3-Phase Apex Model 20S; 20" Vertical Disc Sander; S/n 318; 10 1/2" x 26 1/4" Work Surface; Baldor 2-HP x 1,725 RPM; Powermatic-Houdaille Model 35B; 12" Vertical Disc Sander; S/n ; 7" x 17 1/4" Work Surface; Leeson 1-HP x 1,725 RPM Motor; 3-Phase Delta-Rockwell 12" Vertical Disc Sander; S/n BZ5917; 7" x 16 1/4" Work Surface; Baldor 3/4-HP x 1,725 RPM Motor; ; with Attached Bag Type Dust Collector Rockwell-Delta Model ; 12" Vertical Disc Sander; S/n EA8639; 7" x 16 1/4" Work Surface; Rockwell 1-HP x 1,725 RPM Motor; 3-Phase State Model T5; Spindle Sander; S/n 381; Focus 1 DC Variable Speed Control; 27" x 32" Work Surface; with Spindle Tooling; State Model B4; Spindle Sander; S/n 1168; 20" x 24" Work Surface; with Spindle Tooling; Master 1/2-HP x 1,725 RPM Motor; Logan Model 820; 10" x 16" Belt Driven Steel Working Lathe; Variable Speed; 6 1/4" 3-Jaw Chuck; Standard Tool Post; Tailstock with 1/2" Chuck;
3 3 Rockwell-Delta 14" Vertical Contour Metal Cutting Band Saw; S/n ; 14" x 14" Work Surface; Motor Rockwell Model ; 14" Vertical Contour Wood Cutting Band Saw; S/n FB-4608; 14" x 14" Work Surface; T-J 3-19mm Capacity Portable Blade Welder; S/n 42447; 200-Volt Rockwell-Delta Unisaw 10" Table Saw; S/n ; 27" x 36" Work Surface Delta 10" Unisaw Table Saw; 27" x 36" Work Surface; 1 1/2-HP x 1,425 RPM; 3-Phase Rockwell-Delta Model ; Bench Top Scroll Saw; S/n HK398; with Stand; 14" x 14" Work Surface; Rockwell 1/3-HP x 1,725 RPM Motor; DeWalt Model 7790; 12" Contractors Radial Arm Saw; 17 1/2" x 30" Work Surface; 3 1/2-HP Motor; No Identifying Name Model G5012W; Horizontal Metal Cutting Band Saw; Portable; Single Phase Rockwell-Delta Model Shaper; S/n ; 8 1/2" x 27" Work Surface; Walker-Turner 15" Floor Standing Drill Press; 11" x 14" Work Surface; Dayton 1/2-HP x 1,725 RPM Motor; Central Machinery Model 45378; Portable Bag Type Dust Collector; 70-Gallon Bag Capacity; 2-HP x 3,450 RPM Motor; Jet Model DC-1182; Portable Bag Type Dust Collector; S/n ; 2-HP x 3,500 RPM Motor; Cincinnati Model 200S; Dust Master Drum Type Dust Collector; S/n G009774; Baldor 2-HP x 3,450 RPM Motor; 3-Phase Cincinnati Model 1Z967B; Drum Type Dust Collector; Doerr 1/2-HP x 3,450 RPM Motor; Central Machinery Model 94029; Portable Bag Type Dust Collector; 1-HP Motor; (2) Roovers Stencil Machines; (1) Model and (1) Model 31241X; Both Mounted on Common Pedestal Stand Thermal-Arc Arc-Master 501 Mig Welder with Hobart HMC-410 Wire Feeder
4 4 Aqua Scrub Parts Cleaner System Hako Minuteman Walk Behind Floor Sweeper Air Compressors Ingersoll-Rand Model 71T2-10E; 10-HP 2-Stage V-Twin Cylinder; Horizontal Tank Mounted AirCompressor; Approx. 80-Gallon Capacity Tank; Westinghouse Motor; 1,745 RPM Craftsman 1-HP & 1 1/2-HP Horizontal Tank Mounted Air Compressors; Campbell Hausfeld 4-HP Horizontal Tank Mounted Air Compressor; Curtis Approx. 80-Gallon Capacity Horizontal Air Receiving Tank Hydraulic Units Enerpac Model WEH4020BFP-WMK21; Portable Hydraulic Unit; Hydraulic Units from 1/2-HP to 7 1/2-HP Oxygen/Acetylene Outfit with Cart; (Tanks Not Included) Ridgid & Greenlee Power Tools General Shop Equipment Hand Tools; Welding Rods and Accessories; Lincoln.045 &.052 Welding Wire; Safety Supplies; Air Hose; Extension Cords; Sanding Supplies;Craftsman, Milwaukee, DeWalt, AEG and Black & Decker Power Tools; Ropes; Wire Cables; Lighting Supplies; Linoleum; Caster Wheels; Hose; Belts; Shop Vac's; Rubbermaid Portable Trash Cans; Shop Fans 24" to 42"; Stock Carts; Rubbermaid & Stainless Mop Buckets; Steel Work BenchesFire Extinguishers; High Bay Lighting; Aluminum Extension Ladders; Fiberglass Step Ladders; Wood Step Ladders; Lincoln & Aro Portable Grease Dispensing Units; Beverage Vending Machine; 1973 Wonderland Tandem Axle 5th Wheel Travel Trailer Machine Tooling & Inspection Westhoff Model 100-2; Super Ultra Sensitive Horizontal Precision Table Drill for EDM Electrodes; Precision Drilling & Milling; S/n ; Variable Speed; Work Light; Cart 32" x 60" T-Slotted Portable Steel Layout Plate Troyke Model DMT-15; 15" Rotary Table with 12" x 12" T-Slotted Cross Slide Table 5" Universal Machine Vise Chucks; Vises; Collets; Large Quantity of Hold Down Tooling; etc. Micrometers; Calipers; Indicators; Height Gages; Steel Surface Plates; etc.
5 5 Material Handling (2) Fork Lifts; Roll-Off Box Blue Giant 4400-Lbs. Hydraulic Pallet Jack Model WD12N; 3/4-Ton Hydraulic Wheel Dolly with Sunex 12-Ton Bottle Jack Coats Hydraulic Wheel Dolly (3) Power Mobility Chairs CBI Model 304 Forklift Bucket Attachment; (NEW) Forks; Lista Tooling Cabinets Material Storage Safety Cabinets Large Quantity of Open Bin Cabinets Stronghold 36" to 72" Wide Industrial Cabinets; Standard Duty Supply Cabinets Rigging & Gang Boxes Steel Work Horses Electric Personnel Transport Shop Vehicles Chainfall Hoists; Chains; Binders; Banding Outfit; Cable & Cloth Slings; Air & Fluid Reels; GSE 658 Digital Dual Station Bench Top Scale Golf Equipment Kwikprint Hot Stamp Golf Club Engraving Machine Custom Club Bending Machine Golf Clubs Sweaters; Balls; Club Covers; Bags; Store displays; Office Equipment Hewlett Packard DesignJet 650c Color Plotter Computers; Printers; Monitors & Parts; Large Quantity of Printer Cartridges; Electric Drawing Boards; Office Supplies; Fax Machines; File Cabinets; Furniture; Microwaves; Refrigerators; TV's; Vacuum Cleaners; Tables; Chairs
3/9/2015 https://www.proxibid.com/asp/catalogprint.asp?aid= https://www.proxibid.com/asp/catalogprint.asp?aid= /13
Industrial Machinery & Equipment > BIDITUP Auctions Worldwide > Manitowoc Beverage Systems Manitowoc Beverage Systems by BIDITUP Auctions Worldwide Event Begins: Tuesday, March 10, 11:00 AM Pacific First
More informationFLS Auction Services. Auction Of The Former Sharon Foundry. Ended Jan 19, :01pm CST. Description
FLS Auction Services Auction Of The Former Sharon Foundry Ended Jan 19, 2012 12:01pm CST 141 Seymour Street Sharon Wisconsin 53585 United States Lot Description 1 BUILDING AND LAND APPROX. 2.4 ACRES, 35,000
More informationAUCTION CATALOG CARTER MOLD
AUCTION CATALOG CARTER MOLD 10 AM Thursday, July 23rd Preview 8-10, Thursday 9120 E Marginal Way S - Seattle, WA 98108 MurphyLIVE! BIDDING LOTS 1 - END **LOT 29, The Hyster forklift must stay until Tuesday,
More informationZenith Auction & Realty, Inc.
AUCTION SATURDAY, APRIL 18, 2009 9:00 A.M. 3719 Madison Hwy. (I-75 Exit 11 - GA Hwy. 31) Valdosta, Georgia 3.22 ± ACRES + Shop, Vehicles & Equipment Zenith Auction & Realty, Inc. Donald Patten, CAI, Auctioneer
More informationASPHALT RECYCLING SOLUTIONS
ONLINE AUCTION Assets from Asphalt Recycling Company Surplus Bridge Cranes, Horizontal Boring Mills & More By Order of Secured Lender: ASPHALT RECYCLING SOLUTIONS Assets located in South Dakota, North
More informationATELIER D USINAGE ARVIDA INC.
600+ LOT SALE! PUBLIC AUCTION ATELIER D USINAGE ARVIDA INC. 10 X.5 CAPACITY 18 X 59 TABLE 2011 GINGRAS combination hydraulic brake & shear C-TEK KM-180D CNC vertical machining center 2 AVAILABLE 5 SPINDLE
More informationAUCTION CATALOG VERTICAL CONCEPTS
AUCTION CATALOG VERTICAL CONCEPTS 10 AM Tuesday, August 18th Preview 8-10, Tuesday 11527 Cyrus Way, Suite 2 - Mukilteo, WA 98275 Murphy LIVE! BIDDING LOTS 1 - END *LOT 192 THE YALE FORKLIFT MUST STAY UNTIL
More informationMONDAY, DECEMBER 14 TH, 2015 *** 1:00 P.M. EST *** WELCOME TO THE AUCTION SALE OF
MONDAY, DECEMBER 14 TH, 2015 *** 1:00 P.M. EST *** WELCOME TO THE AUCTION SALE OF EQUIPMENT REPAIR SHOP 126 BRADWICK DRIVE,CONCORD, ONTARIO CANADA, L4K 1K8 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY
More informationVEHICLE RESEARCH & DEVELOPMENT
ONLINE AUCTION Vehicle Testing & Research Facility By Order of the U.S. Bankruptcy Court (E.D. Mich.-Flint) in the Matter of Vehicle Research and Development, Inc. VEHICLE RESEARCH & DEVELOPMENT 3863 Van
More informationUNITED OILFIELD INC. ASSET LISTING
20' sea container National Security Large Gun Safe National Security Gun Safe Skidded tool crib Blu-Chip "1624" all terrain 16,000lbs capacity forklift 2-stage mast. Hydraulic forks. Hrs N/A. SN 3284.
More informationCORE DRILL, HILTI MDL. DD130,
1 1 CORE DRILL, HILTI MDL. DD130, w/extra diamond core bit 2 1 HAND-HELD PIPE THREADER, RIDGID 3 1 LOT OF DISC GRINDERS, 7" 4 1 LOT OF DISC GRINDERS, 7" (2) 5 1 LOT OF ANGLE GRINDERS, 4-1/2" 6 1 LOT OF
More informationCOMPLETE LATE MODEL FABRICATING FACILITY AUCTION CONDUCTED BY:
PUBLIC AUCTION WEENING BROTHERS MANUFACTURING INC. MARK YOUR CALENDARS! Tuesday, June 12, 2018 10:30 A.M. EDT 33475 Hwy 88, RR #1, Bradford, Ontario, L3Z 2 INSPECTION: Monday, June 11 from 9:00 A.M. to
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationPaul E. Saperstein Co., Inc.
Paul E. Saperstein Co., Inc. DAY 2 - PLASMA CUTTER - WELDERS - MILLER - BRAKES - LATHE - AIR COMPS. - TOOLING -RIGGING & SUPPLIES - SCRAP METAL - HANDLING EQUIP. PLASMA CUTTER - WELDERS - MILLER - BRAKES
More informationBASKIM INDUSTRIES LONDON, ONTARIO COMPLETE FABRICATING & MACHINING FACILITY AUCTION CONDUCTED BY:
PUBLIC AUCTION Surplus Assets of BASKIM INDUSTRIES LONDON, ONTARIO Tuesday, March 28, 2017 1:30 P.M. EDT 250+ LOTS! ONSITE & ONLINE 103 Falcon Street London, ON, N5W 4Z2 INSPECTION: Tuesday, March 28 from
More informationTHURSDAY, JULY 16, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF
THURSDAY, JULY 16, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF SURPLUS TO THE ONGOING NEEDS OF ACERO STAINLESS NORTHAM INDUSTRIAL PARK, BUILDING #20, UNIT #3 COBOURG, ONTARIO, CANADA, K9A
More informationHURON MOLD AND TOOL. CNC Tool & Die Facility. 15 Cope Court, Guelph, Ontario
2008 CNC VERTICAL MACHINING CENTERS CLARK 15,000 LB CAPACITY, MODEL C500Y150 YALE 7,100 LB CAPACITY, MODEL GLC080VXNGSE088 2003 HURON MOLD AND TOOL CNC Tool & Die Facility VEHICLES SUPPORT EQUIPMENT HYDRAULIC
More informationGeneral Machinery & Equipment Listing This is not the sale catalog, the sale catalog will post on Bidspotter Monday, March 17 9 AM
General Machinery & Equipment Listing This is not the sale catalog, the sale catalog will post on Bidspotter Monday, March 17 9 AM SHEAR: Pearson 10 x ¼ Hydraulic Shear, SN 5194-6 PRESS BRAKE: Daisa Hydraulic
More informationJD Sales LLC Equipment List
JD Sales LLC Equipment List Trucks 2000 Peterbilt 379 Day Cab Semi Truck, Cat C15 6 NZ Diesel Engine, 13 Speed Transmission, 12,000 lb Front, 40,000 Rear, Chrome Breathers, Dual Exhaust, Out Show Truck,
More informationPlant Closed DILWORTH MACHINE. 600 Cherry Fork Ave. Leetonia, Ohio (20 Miles South of Youngstown, Ohio)
LATE MODEL CNC AND MANUAL MACHINING FACILITY INCLUDING CLAUSING 5000MT CNC TURNING CENTER, VMC S, SLANT BED TURNING CENTERS, 36 X 168 AMERICAN PACEMAKER LATHE, 5 LUCAS AND 4 G & L BORING MILL, BLAST CABINET,
More informationARCHITECTURAL WINDOW & DOOR GLAZING SYSTEM FACILITY
Surplus To The Ongoing Operations Of: 250 Bowes Road, Concord, Ontario, Canada ARCHITECTURAL WINDOW & DOOR GLAZING SYSTEM FACILITY 2007 1999 HACO HSLX 3606 HYDRAULIC SHEAR 12 ft x ¼" Hydraulic Clamping
More informationArizona Auctioneers. Valley Truck & Trailer Service, Inc. Started May 10, pm CDT. Description
Arizona Auctioneers Valley Truck & Trailer Service, Inc. Started May 10, 2012 12pm CDT 5228 North Tom Murray Avenue Glendale Arizona United States Lot Description 1 LOT BROOMS, MOPS, ETC 2 LOT HARDWARE
More informationGlenn A. Winternitz, LLC
Glenn A. Winternitz, LLC ONLINE AUCTION Excess to Cadillac Tank & Metal Fabricators, Inc. INSPECTION MONDAY & TUESDAY, DECEMBER 3 & 4, 9AM TO 4PM **ALL ITEMS TO BE REMOVED FROM THE PREMISES BY DECEMBER
More informationClinton Heating & Air Conditioning, Inc Prune Avenue, Fremont, CA Saturday, June 24, 2017 at 11:00 a.m.
2162 Prune Avenue, Fremont, CA 94539 Saturday, June 24, 2017 at 11:00 a.m. Check Out Dates and Times Sunday, June 25, 2017-10:00 a.m. 3:00 p.m. Monday, June 26, 2017 9:00 a.m. 5:00 p.m. Tuesday, June 27,
More informationAZEK CANADA. Late Model Extrusion Facility. Bidding Ends: Thursday January 30, 2:00 PM (ET) AUCTIONEER S NOTE:
DUST COLLECTOR CORAL 60 HP Dust Collector System, Model PRM 630/T, 400V, sn NO202568 AIR COMPRESSORS CORAL 60 HP DUST COLLECTOR SULLIVAN PALATEK 75 HP COMPRESSOR SULLIVAN PALATEK 75 HP Compressor, Model
More information(DIRECTIONS: Located on the near Southwest side of Indianapolis, IN. Watch for red & yellow auction directional signs.)
PUBLIC AUCTION Complete Truck & Trailer MANY OTHER ITEMS TOO NUMEROUS TO MENTION TERMS CASH Repair Shop including 2 Service Trucks!! MARK THIS DATE ON YOUR CALENDAR TERMS: Everything is sold as is, where
More informationJeff Bub Auctioneer. Metal Fabricating Auction Surplus
Jeff Bub Auctioneer Metal Fabricating Auction Surplus Mitsubishi IXP laser, Accupress 80 ton press brake, Power rolls, Bridgeport mill, Dust collector, Mig welders, Rotary table, Grinder, Tooling & more
More informationABSOLUTE AUCTION. Bluegrass Forging Tool & Die Co. with additions
ABSOLUTE AUCTION NO MINIMUMS! NO RESERVES! NO BUYER S PREMIUM! Bluegrass Forging Tool & Die Co. with additions Auction: Saturday, October 14, 2006 10 AM (EDT) Inspection: Friday, October 13, 2006 9:00
More informationFABRICATING & STAMPING MACHINERY Excess Inventory of CFM CORPORATION. Auction Date: Thursday, October 16th, 2008, at 10:30 a.m.
AUCTION SALE FABRICATING & STAMPING MACHINERY Excess Inventory of CFM CORPORATION 1000 E. Market Street, Huntington, Indiana Auction Date: Thursday, October 16th, 2008, at 10:30 a.m. Inspection Dates:
More informationThompson Auctioneers. R.J. Hlasko Co. Started Sep 15, am EDT. Description Mills Industrial Pkwy N. Ridgeville Ohio United States
Thompson Auctioneers R.J. Hlasko Co. Started Sep 15, 2015 10am EDT 4915 Mills Industrial Pkwy N. Ridgeville Ohio 44039 United States Lot Description 1 Milwaukee Cordless Drill with Case and Charger, 12
More informationEAST TECH CO. DESIGN & MFG.
PRECISION CNC MACHINING FACILITY INCLUDING LATE MODEL MAZAK MACHINING AND TURNING CENTERS (TO ), EDM S, MACHINE TOOLS, QC, ENGINEERING, PLANT SUPPORT, COMPLETE 30,000 SQ. FT. FACILITY CLOSURE See Instructions
More informationStockwell Equipment Co. P.O. Box 531 Seekonk,, MA Phone: Forklift Trucks Inc. 9/12/2011. Inv#: 1802 File cabinets.
P.O. Box Seekonk,, MA 0 Phone: 40--0 Forklift Trucks Inc. 9//0 4 8 9 0 4 8 9 Inv#: 8 Cabinet and contents Inv#: 84 Cabinet and Contents. Inv#: 8 Computer set up. Inv#: 8 Computer set up. Inv#: 8 Copier
More informationLodi Equipment, West Sacramento, CA
Lodi Equipment, West Sacramento, CA Auction Opens: Tue, Nov 3 10:00am Auction Closes: Thu, Nov 5 10:00am 100 2007 Ford F-550 Super Duty Flatbed Truck 101 Cat DP70 Forklift 102 Mitsubishi Propane Warehouse
More informationSTARTING BID BID INCREMENTS Reliant 8" bench type drill press, 1/3 HP, 1 PH Bench type arbor press 20 5
521 1 1 Reliant 8" bench type drill press, 1/3 HP, 1 PH 20 5 521 2 1 Bench type arbor press 20 5 521 3 1 Ried bench type drill grinder, M/N 9100, 1/3 HP, 1 PH 50 10 521 4 1 Baldor 2" belt grinder/buffer,
More informationWEST TEXAS BULLDOG OILFIELD SERVICES, LLC
PUBLIC AUCTION Oilfield Services Company & Construction Equipment WEST TEXAS BULLDOG OILFIELD SERVICES, LLC By Order of the Secured Lender: 3.3 miles South of the Intersection of Highways 329 & 385 in
More informationAuction Catalogue. WH House. Bidvest Workshop. 76 Hattingh Street, Elandsfontein, Germiston. On: Monday 25 th Jun 10H30
` Auction Catalogue Auction title: Bidvest Workshop Public Auction to be held at: WH House 76 Hattingh Street, Elandsfontein, Germiston On: Monday 25 th Jun 2012 @ 10H30 Winterstein & Henderson Auctions
More informationMetalworking Equipment, Utility Trucks, Pickups, Welders, Power Tools in Oakland, CA
Metalworking Equipment, Utility Trucks, Pickups, Welders, Power Tools in Oakland, CA Auction Opens: Tue, Oct 18 9:00am Auction Closes: Thu, Oct 20 9:00am 100 1999 Ford F-450 Super Duty Utility Truck 101
More informationTHIS LISTING IS MEARLY A GUIDE, THE ACTUAL LISTING WILL BE GIVING TO REGISTERED BUYERS AT THE AUCTION.
AUCTION LOT LISTING The Estate of Richard "Dickie" Prime Moved for convenience to: 22 Dewey Avenue, Warwick, RI Auction Date: Saturday, November 8, 2014 10:30AM Inspection: 9:00 AM Morning of the sale
More informationONLINE PUBLIC AUCTION
1 ONLINE PUBLIC AUCTION HIGHLAND VIEW FARMS LLC 2565 LARKS LAKE ROAD HARBOR SPRINGS, MICHIGAN 49740 STARTS: MONDAY, JULY 7, 2014 / ENDS: THURSDAY, JULY 10 TH AT 10:00 AM INSPECTION: SATURDAY, JULY 5 TH
More informationASBURY PARK PRESS SEPTEMBER 26, 2009
ASBURY PARK PRESS SEPTEMBER 26, 2009 LOT DESCRIPTION VIN VEHICLES 1 1999 CHEVY MALIBU, MILEAGE: 161,000 1G1LD5548SY245328 2 2001 DODGE CARGO VAN, MILEAGE: 167,000 2B7KB31Y91K547437 3 1998 CHEVY MALIBU,
More informationSaturday, January 22, AM Total Liquidation Bankruptcy Case # G&G WELDING, INC.
Saturday, January 22, 2010-10AM Total Liquidation Bankruptcy Case # 10-40516 G&G WELDING, INC. 36303 Industrial Way Sandy, OR Oregon DL 2611 TERMS & CONDITIONS: All items must be paid in full within one
More informationARKANSAS STATE HIGHWAY AND TRANSPORTATION DEPARTMENT INVITATION TO BIDDERS M P
ARKANSAS STATE HIGHWAY AND TRANSPORTATION DEPARTMENT INVITATION TO BIDDERS M-09-078P SALE OF SALVAGE DISTRICT 7 HEADQUARTERS 2245 CALIFORNIA AVENUE CAMDEN, AR 71711 Sealed bids on the above-referenced
More informationLeading Wood Model Manufacturer
ONLINE AUCTION Balsa & Basswood Model Kit Manufacturer Plant Closed: Leading Wood Model Manufacturer 708 W. Bradley Avenue Urbana, Illinois 61801 BID ONLINE: Thursday, August 23rd thru Tuesday, August
More informationPUBLIC AUCTION. Asset Group Inc. LATE MODEL MINING & CONSTRUCTION EVENT WITH ASSETS FROM A MAJOR UNDERGROUND GOLD MINE!
MASSIVE MINING & CONSTRUCTION EVENT! PUBLIC AUCTION Surplus Assets of CENTURy MINING CORpORATION 2008 2 available 2005 CATERPILLAR 740 articulated rock haul dump truck KOMATSU PC-750LC hydraulic excavator
More informationESCO WRIGHT. THURSDAY, JUNE 9th, at 10AM. new as OF 7. new as OF 4 FACILITY CLOSED - FABRICATION & REPAIR FACILITY
ESCO WRIGHT THURSDAY, JUNE 9th, at 10AM 12 Brittney Lane in Wright, Wyoming 82732 Inspection: Day prior to auction from 9AM - 4PM FACILITY CLOSED - FABRICATION & REPAIR FACILITY SULLAIR 185 CFM Air Compressor
More informationOFF SITE FARM SALE FARM MACHINERY & ASSOCIATED SUNDRIES
OFF SITE FARM SALE FARM MACHINERY & ASSOCIATED SUNDRIES Friday 10 th August At 10:30AM ON BEHALF OF The Moles Family To be held at Lower Calf Hall Farm Calf Hall Lane Barnoldswick BB18 5SA Viewing strictly
More informationONLINE ONLYAUCTION. Koike Aronson Mdl. V4100DH CNC Plasma Burning Machine. To Register For This Auction, Please Visit
ONLINE ONLYAUCTION FEATURING: Press Brake Shear Ironworkers Horizontal Bandsaws CNC Flame & Plasma Cutters (30) Late Model Welders Power Tank Turning Rolls Welding Positioners Dust Collectors Pipe Threaders
More informationLate Model Tool & Die Facility
130 Shearson Crescent Cambridge, Ontario, Canada 50 Taper 2012 Late Model Tool & Die Facility Plus Real Estate For Sale Travels: X-82.7" Y-63" Z-30" AWEA CNC BRIDGE TYPE MILL, MODEL SP2016 1of 4 Takumi
More informationM. R. JUTZI AUCTIONS. Fabricating, Woodworking, Construction & Shop Equip. Saturday, November 29, 9:30 a.m.
M. R. JUTZI AUCTIONS Fabricating, Woodworking, Construction & Shop Equip. Saturday, November 29, 2008 @ 9:30 a.m. Auction Catalog Lot# Quantity Description 1 1 MARKEL SPACE HEATER 2 1 H/D ELECTRIC HEATER
More informationIndustrial Machinery & Equipment > Maynards Industries (1991) Inc > Electrolux Canada Corp Online. MasterLock Lock Box. Lot #7 (Sale Order 7 of 112)
Industrial Machinery & Equipment > Maynards Industries (1991) Inc > Electrolux Canada Corp Online Electrolux Canada Corp Online by Maynards Industries (1991) Inc Event Begins: Tuesday, June 2, 9:00 AM
More informationTWO OF FOUR MAJOR PUBLIC AUCTIONS
TWO OF FOUR MAJOR PUBLIC AUCTIONS By Order Of The Receiver For Royal Oak Industries Inc.: Royal Oak Boring (Port Huron MI) & Bronson Precision Products (Bronson MI) World-Class High Precision CNC Machining
More informationPrincipal Ordered Liquidation of Autobody Shop and Welding / Metal Shop - Forklifts, Auto Frame Straightener, Paint Booths, Welders
Capp International Principal Ordered Liquidation of Autobody Shop and Welding / Metal Shop - Forklifts, Auto Frame Straightener, Paint Booths, Welders Forklifts, Auto Frame Straightener, Paint Booths,
More informationONE-OWNER. AUCTION By Order of Secured Party - Equipment of: Michael Construction Co Industrial Parkway AKRON, OHIO 44310
A n o t h e r B a m b e c k A u c t i o n e e r s I n c. A U C T I O N Note: Although the information contained herein has been obtained from sources believed to be reliable, prospective buyers are encouraged
More informationCharleston Auctions, Inc.
Charleston Auctions, Inc. 2 Day Auction - American Landmaster & Unico, Inc.- Surplus to the Continuing Operation - Day 2 Ended Dec 07, 2017 3:04pm CST (9:04pm GMT) 62194 COMMERCIAL STREET Roseland Louisiana
More informationALL IS SOLD:AS-IS,WHERE-IS-NO WARRANTIES EXPRESSED/IMPLIED
Page 1 This catalogue is meant merely as a guide. The auctioneer does not warrant the genuineness, accuracy or count of any items described herein. 1 Bally Engineered Structures 18 ft. x 32 ft. x 12 ft.
More informationLOT DESCRIPTION LOT DESCRIPTION 1 BULLARD FREE AIR PUMP; MODEL EDP16TE
1 BULLARD FREE AIR PUMP; MODEL EDP16TE 2 BULLARD FREE AIR PUMP 3 SPEEDGLAS FRESH AIR WELDING HOOD 4 SPEEDGLAS FRESH AIR WELDING HOOD 5 SPEEDGLAS FRESH AIR WELDING HOOD 6 SPEEDGLAS FRESH AIR WELDING HOOD
More information2 AVAILABLE. Online Bidding at
ONLINE AUCTION Assets No Longer Required for the Ongoing Operations of BLUESCOPE BUILDINGS NORTH AMERICA CUT-TO-LENGTH LINES 200 TON PACIFIC 200PFII PRESS FORMER HYDRAULIC PRESS 2 AVAILABLE MG PLASMA CUTTER
More informationABSOLUTE AUCTION - METALWORKING SHOP
Stampler Auctions ABSOLUTE AUCTION - METALWORKING SHOP SCREW MACHINES / CNC MACHINES / MILLING MACHINES / DRILLS / LATHES / FORKLIFT / SANDER / COMPRESSOR / TOOLING & MORE 2329 NW 30 Street Oakland Park
More informationBiditup Auctions Worldwide, Inc./Maynards Industries
Biditup Auctions Worldwide, Inc./Maynards Industries Faust America Corporation Featuring well maintained CNC shop including (2) Sodick wire EDM and AM3L Ram type EDM, Makino vertical mill, Nicco surface
More informationLIVE ONSITE & WEBCAST AUCTION
LIVE ONSITE & WEBCAST AUCTION COMPLETE PLANT CLOSURE OF STEEL BEAM AND STRUCTURAL STEEL MANUFACTURING COMPANY By Order of the Court Appointed Receiver The Audette Group LLC 11 Helmsman Avenue, North Kingstown,
More informationPUBLIC AUCTION CATALOG
ONSITE & ONLINE TECHNICAL ERECTORS 106 Boss Road, Syracuse, New York WEDNESDAY, JANUARY 12 TH @ 10:00 AM Open House Inspection: January 11 th from 9:00 4:00 PM & Sale Day Starting at 8:00 AM Terms and
More information10 1 Oxy Acetylene Hoses and Accessories Including Gauges, Torches & Trolley Bailey Extension Ladder 150Kg Capacity, 23 Step
1 1 Uni-Mig AW2002 Mig Welder Portable 2 1 WIA Weldmatic 335 Mig Welder 3 1 CIG Professional Welder 4 1 Work Bench Portable, with Weldmatic 2RD Remote Wire Feed Unit Serial No: C440 1201088 On Trolley
More informationBy Order of Court Reciever. DAY 1: East Riggs Road, Chandler, Arizona DAY 2: 9411 Alpine Drive, Ramsey, Minnesota 55303
By Order of Court Reciever DAY 1: 11237 East Riggs Road, Chandler, Arizona 85249 DAY 2: 9411 Alpine Drive, Ramsey, Minnesota 55303 BIDDING CLOSES Wednesday & Thursday, June 13 & 14 Beginning at 10:00 A.M.
More informationCorporate Assets, Inc.
Corporate Assets, Inc. Seaway Marine & Industrial Inc. DAY 2 Starts May 14, 2014 10am EDT 340 Lakeshore Road East Ontario Canada Lot Description 2030 PNEUMATIC RIGHT ANGLE GRINDERS (STORES) 2031 PNEUMATIC
More informationCUTLER MACHINE CO. LTD.
TUESDAY, JUNE 14, 2016 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF CUTLER MACHINE CO. LTD. 1080 HERITAGE RD., BURLINGTON, ONTARIO, CANADA, L7L 4X9 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY
More informationM.R. Jutzi Auctions. Storage/Warehouse Auction. Saturday October 4, 9:00 am. on site Fountain St North, Breslau, Ontario
M.R. Jutzi Auctions Storage/Warehouse Auction Saturday October 4, 2014 @ 9:00 am on site - 5100 Fountain St North, Breslau, Ontario Auction Catalog Lot# Quantity Description 1 1 BLACK TOOL TRAY c/w PULLERS,
More informationPUBLIC AUCTION MOST EQUIPMENT AS NEW AS By Order of Secured Party. West Florida Recycling PAPER AND PLASTICS RECYCLING YARD
PUBLIC AUCTION MOST EQUIPMENT AS NEW AS By Order of Secured Party West Florida Recycling PAPER AND PLASTICS RECYCLING YARD FEATURING Recycling Line Baler Loaders Trucks Bins & More! Thursday, October 9th
More informationTHE NEXT GENERATION OF PERFORMANCE
Best Value Guaranteed THE NEXT GENERATION OF PERFORMANCE 1 HP Continuous-Duty Dust Collector (M I -11100) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 750 CFM 10 (254 mm) 75 dba 15 (381 mm) Bag Capacity: 20 gal.
More informationOVER 1000 LOTS TO BE SOLD OVER 200 COILS
AMERICAN AUCTIONEERS GROUP 1146 N Central Avenue #535 Glendale, California 91202 Phone: 818-763-2021 Fax: 818-291-9495 WWW.AAGAUCTION.COM AUCTION MAJOR INDUSTRIAL EQUIPMENT AUCTION 5 MILLION DOLLAR IN
More informationSand & Gravel, Inc. Job Demands Analysis. Purpose of Activities:
Job Demands Analysis Sand & Gravel, Inc. Company: Thelen Sand & Gravel, Inc. Job Title: Maintenance / Welder Location: Maintenance Shop Classification: Regular Duty Purpose of Activities: The maintenance
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationWelding Shop Total Liquidation Auction - DAYTIME (June 1)
Welding Shop Total Liquidation Auction - DAYTIME (June 1) Auction Opens: Mon, May 23 12:00am PT Auction Closes: Wed, Jun 1 10:00am PT WEL0100 WEL0101 WEL0102 WEL0200 WEL0300 WEL0400 WEL0500 WEL0600 WEL1907
More informationOnline Tools & Machinery Auction
D/L 19539-26 McDowell WELSHPOOL WA www.gregsons.com.au - Ph 0893581766 ABN: 74 433 183 114 Online Tools & Machinery Auction Sunday, March 13, 2016 Commencing at 06:00 PM (UTC+08:00) A 15% Buyers Premium
More information**NEW LIQUIDATION** WE ARE PLEASED TO OFFER THE FOLLOWING EQUIPMENT FOR SALE
**NEW LIQUIDATION** WE ARE PLEASED TO OFFER THE FOLLOWING EQUIPMENT F SALE CE, CONVEYS, MULLER, MOLDING MACHINE, SILOS, FLASKS MIXERS, LAB, INDUCTION FURNACES AND LOTS ME COMPLETE IRON FOUNDRY OVER 50
More informationFORTNER GRAPHICS, INC.
COMPLETE PRINTING PRESS REBUILDER AND CYLINDER / ROLLER FINISHING AND GRINDING FACILITY INCLUDING MACHINE TOOLS AND CONTRACTORS EQUIPMENT Select Items To Be Offered Online See Instructions on Page 2 To
More informationOF EQUIPMENT BY MAJOR PLC
ONLINE AUCTION SALE - DISPOSAL OF EQUIPMENT BY MAJOR PLC (Ends: 2018-05-16 14:00:00.0) On Instructions received from a Major PLC SHEET METALWORKING EQUIPMENT, MOTOR TRADE EQUIPMENT, TYRE REPLACEMENT MACHINERY,
More informationLOT QNTY DESC MILLER SPECTRUM 2050 PLASMA CUTTER, V, %DC 2 1 GRACO PANT MIXING SYSTEM 3 1 GRACO GH230 ELECTRIC AIRLESS
LOT QNTY DESC MILLER SPECTRUM 2050 PLASMA CUTTER, 208-230-460-575V, 1 1 55 AMPS @ 60%DC 2 1 GRACO PANT MIXING SYSTEM 3 1 GRACO GH230 ELECTRIC AIRLESS PAINT SPRAYER 4 1 GRACO GH230 ELECTRIC AIRLESS PAINT
More informationSOLON INDUSTRIAL GRINDING
LARGE CAPACITY GRINDING AND MACHINING FACILITY INCLUDING HYDRAULIC SURFACE GRINDERS TO 56 X 196, ROTARY SURFACE GRINDERS TO 60, CNC VMC s, PLANER MILLS, BRIDGE CRANES TO 25 TON AND SUPPPORT EQUIPMENT See
More informationLarge Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock & Consumables
Stanref International Ltd, Pressure (Ends: 2018-04-24 14:00:00.0) Vessel Manufacturing Equipment.(Further lots to be added) Large Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock
More informationWEBCAST/ONSITE AUCTION
Industrial HilcoTM WEBCAST/ONSITE AUCTION Late Model Steel Fabrication Facility Specializing in the Manufacture of High Specification Pressure Vessels, Modules & Tanks OVER 1000 LOTS! New Cost Over $275,000
More informationTRIP Equipment Requirements
TRIP Requirements Recovery Wrecker Specifications All eligible COMPANIES must have either one 50-Ton Recovery Truck OR one 40-Ton Rotator AND One 30-Ton Heavy Duty Wrecker. The qualifications listed below
More informationA & A Auto Repair 5036 Blum Road, Martinez, CA Saturday, May 13, 2017 at 11:00 a.m.
Saturday, May 13, 2017 at 11:00 a.m. Check Out Dates and Times Sunday, May 14, 2017-10:00 a.m. 3:00 p.m. Monday, May 15, 2017 9:00 a.m. 5:00 p.m. Daniel Clar Auctioneers and Appraisers 1390 Broadway Suite
More informationLOT LIST QTY DESCRIPTION NOTES
1 1 - (2) RAIDER BAR STOOLS AND ROUND TABLE 2 1 FLOOR JACK 3 1 - WHEELBARROW W/ EXT CORDS 4 1 - AST. CONES 5 1 - WHEELBARROW W/ STRAPS AND CHAINS 6 1 - (2) HAND TRUCKS 7 1 HAND TRUCK 8 1 (2) STADIUM LIGHTS,
More informationMatt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: May 2, 2014
To: Matt Morgan Assistant Superintendent of Support Services From: Kristine Johnston Director of Purchasing Date: May 2, 2014 Re: Career and Technology Tools and Equipment Annual Contract #14-04-3976 The
More informationSSMP ELEMENT 4 O & M Program APPENDIX 4.3. Sewer Pipe Cleaning Standard Operating Procedures (SOPs)
SSMP ELEMENT 4 O & M Program APPENDIX 4.3 Sewer Pipe Cleaning Standard Operating Procedures (SOPs) City of San Mateo CODE OF SAFE PRACTICES Table of Contents A B C D E F G Air Compressor and Pressure Vessel
More informationnd Road, Udall Personal Property List
3567 82 nd Road, Udall Personal Property List Patio Stones Electric Bale Elevator Side Delivery Rakes Spring Tooth 3-Section Spring Tooth 4-Section Spring Tooth Trailer Hesston Hay Stack Processor Owathonna
More information3 MASSEY HARRIS 4D DIESEL TRACTOR, W/WHEEL WEIGHTS, SINGLE REMOTE, PTO 4 INTERNATIONAL HARVESTER MDL M TRICYCLE TYPE TRACTOR, GAS ENGINE, S/N
Item FARM EQUIPMENT Description 1 PULL BEHIND TWO BOTTOM PLOW 1 A ANTIQUE TOBACCO SETTER 2 INTERNATIONAL HARVESTER 1206 DIESEL TRACTOR, 2-REMOTES, DUAL PTO, S/N 8035S-Y 3 MASSEY HARRIS 4D DIESEL TRACTOR,
More informationMatt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: January 12, 2017
To: Matt Morgan Assistant Superintendent of Support Services From: Kristine Johnston Director of Purchasing Date: January 12, 2017 Re: Career and Technology Equipment Repair Service Annual Contract #16-11-5037R
More information10/26/ :00:42. Loucks Wholesale Tractor Consignment Auction Auction Lots with Image Count and 1 Image
7::42 Page: 562 4594 - OLIVER MODEL 5 CORN PICKER - READY TO GO 563 4753 - WATER SOFTENER 564 4633 - DELTA DRILL PRESS 565 4634 - ERIE PA VISE 566 4635 - BUCKET OF CASTERS 567 4636 - TOTE OF MISC - OIL
More informationKappa Heavy Engineering (Pty) Ltd (In Liquidation)
Kappa Heavy Engineering (Pty) Ltd (In Liquidation) www.devcoauctioneers.co.za OUR OFFER IS TO PURCHASE ASSETS AS PER THE LISTINGS ATTACHED: VIEWING DAY: Thursday, 2 February 2017 from 09h00 to 16h00 ASSETS
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationTools Online Retailer Returns - TRACY - February 16
s Online Retailer Returns - TRACY - February 16 Auction Opens: Fri, Feb 9 12:09pm PT Auction Closes: Fri, Feb 16 10:00am PT TB7000 Wheel Barrow TB7033 TB7001 Wheel Barrow TB7034 TB7002 Wheel Barrow Tub
More informationTHURSDAY, JANUARY 15, 2015 *** 1:30 P.M. EST*** WELCOME TO THE AUCTION SALE OF
THURSDAY, JANUARY 15, 2015 *** 1:30 P.M. EST*** WELCOME TO THE AUCTION SALE OF SURPLUS TO THE ONGOING NEEDS OF A COMMERCIAL WEB PRINTING FACILITY 65 DEVON ROAD, BRAMPTON, ONTARIO, L6G 5B6 TERMS & CONDITIONS
More informationHeritage Global Partners
Heritage Global Partners SAF HOLLAND - Global Online Auction Of Machine Tools & Facility Support Assets Surplus To SAF-Holland 430 West 18th Street Holland Michigan 49423 United States Ended Mar 08, 2018
More informationSFI of Ohio LLC. Tuesday February 5, 11:00 AM. Large Capacity Finishing, Fabrication & Machining Facility AUCTION:
SFI of Ohio LLC Large Capacity Finishing, Fabrication & Machining Facility 3880 Grace Street, New Boston, Ohio, USA 2007 Full 4th Axis PANGBORN 12 HEAD ROTO BLAST MACHINE, MODEL ES-1848-98 COL-MET PAINT
More information59. RANSOMES TURF PROTECTOR CAT 931B BULL DOZER HRS BOBCAT BOBCAT 763 G SERIES 0416
1. TO ARRIVE 2. TO ARRIVE 3. 1987 FORD F350 DUMP 2969 4. 1991 FORD EXPLORER 8672 5. 1995 CHEVY 2500 W/ PLOW 2290 6. 1985 FORD F350 MASON DUMP 9712 7. 1984 GMC UTILITY BED 0998 8. 1993 CHEVT K25S SUBURBAN
More informationRENTAL PRICE LIST. Fast Moving Items CURRENT HOURS: For items not listed, call
Fast Moving Items RENTAL PRICE LIST For items not listed, call 330-724-2100 www.gauerrental.com 676 E. Waterloo Rd Akron Toll Free: 1-866-212-8888 330-724-2100 CURRENT HOURS: Monday-Friday 7:30am - 4:30pm
More informationSPIDER MFG. 50 RITIN LANE, #6, CONCORD, ON, L4K 4C9
THURSDAY, JULY 6, 2017 *** 10:30 AM EDT *** WELCOME TO THE AUCTION SALE OF SPIDER MFG. 50 RITIN LANE, #6, CONCORD, ON, L4K 4C9 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER THE AUCTION A BUYER
More informationStone Auctioneers & Appraisers 61 Lakeview Lane Carrollton, AL Phone: Fax:
Lakeview Lane Carrollton, AL 7 Phone: 0-7-0 Fax: 77-0-7 Fontaine Intermodal //07-/9/07 Paint Booth, Plant : Raypaul 0'" x 7'" x ' Overall, ' x ' x ' Working Area, ' x ' opening, -l doors; w/ Badger Fire
More informationPUBLIC AUCTION PERFECTA PLYWOOD LTD. LATE MODEL VENEER PLYWOOD ASSEMBLY/MANUFACTURING FACILITY PRISTINE WOODWORKING EVENT! 10:30 A.M.
PRISTINE WOODWORKING EVENT! PUBLIC AUCTION PERFECTA PLYWOOD LTD. 2005 13 CAPACITY 2003 149 X 63 PLATENS SAVI TCN 4000 veneer tenderizer ITALPRESSE MARK/C/16-38/122 hot press panel laminating line 2 AVAILABLE
More information