DESCRIPTIONS 1 HORIZONTAL BAND SAW, 9" x 16", MODEL , S/N , W/ LEAD IN ROLLER CONVEYOR.

Transcription

1 1 HORIZONTAL BAND SAW, 9" x 16", MODEL , S/N , W/ LEAD IN ROLLER CONVEYOR. 1 MILLER ECONOTIG, MODEL AND S/N N/A, W/ ROLLER CART, LEADS. 1 SHOP BOOM, EST. 2,500-LB. CAPACITY, EXTENDABLE BOOM, W/ HYDRAULIC LIFT. 1 ASSET #W26, LINCOLN WELDER, COMPLETE W/ LEADS. 1 MILLER MODEL DELTAWELD 452 WELDER, S/N LH011420C, (2007), SKID MOUNTED, INCLUDING MILLER 24V WIRE FEEDER. 1 ASSET #2, CINCINNATI MODEL 3 VERTICAL MILLING MACHINE, S/N 2A3V1J-9, 15" x 62" T-SLOT TABLE. 1 ASSET #6, TRUMP MODEL K3VL VERTICAL MILLING MACHINE, S/N K3V1-771, 3-HP, 10" x 42" T-SLOT POWERFEED TABLE; W/ KURT 6" MACHINE VISE. 1 MSC VERTICAL MILLING MACHINE, EST. 1.5-HP, 10" x 42" POWERFEED TABLE; W/ ACU-RITE 2-AXIS DRO 1 ENCO MODEL III-3100 ENGINE LATHE, 13.5" x 42", B1812" 3-JAW CHUCK, W/ CROSS SLIDE, QUICK TOOL CHANGE. 1 MODEL CD6245C ENGINE LATHE, S/N , 18" X 60", 10" 3-JAW CHUCK, W/ QUICK TOOL CHANGE, CROSS SLIDE, TAPER ATTACHMENT. 1 ENCO MODEL LG-2080DS ENGINE LATHE, S/N , 12" 3-JAW CHUCK, QUICK TOOL CHANGE, CROSS SLIDE. 1 ROCKWELL MODEL VERTICAL BAND SAW, 20" THROAT. 1 DOALL MODEL D-6, S/N N/A, 6" x 18" ELECTROMAGNETIC CHUCK. 1 WILTON MODEL 4300A 6" VERTICAL SANDER, S/N ASSET #W25, LINCOLN MODEL CV300 WELDER, S/N U , LOCATED ON SHOP BUILT CART, INCLUDING LINCOLN LN-7 WIRE FEEDER, S/N U KIKINDA MODEL URB-1000-A SURFACE GRINDER, S/N 7481 (1986) (MADE IN YUGOSLAVIA), 12" x 40" ELECTROMAGNETIC CHUCK. Page 1 of 12

2 LOT MISCELLANEOUS EQUIPMENT, LOCATED IN MAINTENANCE SHOP, INCLUDING, BUT NOT LIMITED TO: EST. 500-LB. CHAIN SAW; FLOOR FANS; BRIDGEPORT LINE SHAFT CONVERTED VERTICAL MILLING MACHINE; (2) CINCINNATI UNIVERSAL MILLING MACHINES (NOT OPERABLE); WORK BENCHES; HAND TRUCKS; TABLETOP HYDRAULIC PRESS; WARNER EXTENSION AND STEP FIBERGLASS LADDERS; HORIZONTAL BAND SAW; OXYGEN AND ACETYLENE SET; (4) FLOOR DRILL PRESS; BENCH GRINDER, ETC. 1 UNIVAC MODEL 330 VACUUM PLATE LIFTER, S/N 45561, 4-CUP, 2,500-LB. CAPACITY, 15'L. 1 PLASMA CUTTING SYSTEMS PLASMA CUTTING SYSTEM, TO INCLUDE (2) SHOP BUILT 7' x 20' WATER CUTTING TABLES, (1) 8' RAIL MOUNTED BRIDGE, APPROX. 60'L, SINGLE CUTTING TORCH, W/ BURNY 10 LCD CONTROLS, INCLUDING INNERLOGIC PRECISION ARC VOLTAGE CONTROL, HYPERTHERM MODEL HT2000 PLASMA CUTTING SYSTEM, S/N N/A; ADDITIONAL RAIL MOUNTED SHOP BUILT PLATE ROBOT, ELECTROMAGNETIC, 10-HEAD, W/ 5' x 21' BUNDLE STAGING PLATFORM. 1 FLANGE/WEB FABRICATION LINE, MANUFACTURED IN-HOUSE, TO INCLUDE: (1) FLANGE CUTTING STATION, W/ (6) POWER ROLL FEED AND EXIT CONVEYOR, APPROX. 24"W, CHAIN DRIVE, EACH SECTION APPROX. 10'L, INCLUDING SINGLE TRACK TORCH OVERHEAD (VICTOR APPEARANCE). (1) FLANGE IN-LINE HYDRAULIC SHEAR, 18" MAX. WIDTH, W/ SHOP ADDED PLC CONTROLS, INCLUDING HYDRAULIC BEAM ALIGNMENT, THICKNESS GAUGE INDICATORS; (4) POWER ROLL INFEED CONVEYOR, APPROX. 24"W, EACH SECTION 10'L; OVERHEAD SHOP BUILT ROBOT FLANGE LIFTER, LOCATED ON STRUCTURED STEEL FRAME, W/ ACCESS TO FLANGE STAGING AREA; CUT FLANGE TRANSFER CONVEYOR, 5-STRAND CHAIN LINK DRIVE, 2-SECTION, INCLUDING FLIPPING UNIT (1) IN-HOUSE SHOP BUILT FLANGE SPLICING STATION (BUTT WELD), 24" MAX. WIDTH CAPACITY, W/ HYDRAULIC FLANGE ALIGNMENT STANDS, OVERHEAD SINGLE WELDING HEAD, WIRE FEED, INCLUDING FLUX SYSTEM, LINCOLN NA-3N WIRE CONTROLLER, UTILIZING LINCOLN DC-600 POWER SUPPLY, (SUB ARC); (2) APPROX. 10' SECTION POWER ROLL FEED CONVEYOR, APPROX. 24"W; (6) POWER ROLL EXIT CONVEYOR, CHAIN DRIVEN; (9) HEAVY DUTY FLANGE TRANSFER CONVEYOR, EACH STRAND 15'L Page 2 of 12

3 (1) WEB SEAM WELDER (BUTT WELDER) STATION, W/ (1) LINCOLN STICK WELDING (FOR SPOT TACKING); (1) MILLER DELTAWELD 452 POWER SUPPLY, W/ HEAD, LOCATED ON APPROX. 8' HORIZONTAL TRAVELLING FLANGE AND WIRE FEEDER, FLUX SYSTEM, MODEL NA-5 WIRE CONTROLLER, S/N U , APPROX. 72' POWER ROLL FEED CONVEYOR, APPROX. 8'W, HYDRAULIC; APPROX. 40' HYDRAULIC POWERED ROLL EXIT CONVEYOR; (5) STRAND CHAIN TRANSFER CONVEYORS (1) SHOP BUILT IN-HOUSE BEAM WELDING STATION, TO INCLUDE: I-BEAM WELDING STATION, APPROX. 10'L, W/ VERTICAL AND HORIZONTAL BEAM ADJUSTMENTS, HYDRAULIC DRIVEN, UTILIZING (2) LINCOLN IDEALARC DC1000 POWER SUPPLY, S/N'S U AND U , INCLUDING AUTOMATIC FLUX FEED SYSTEM AND LINCOLN NA-5 WIRE FEEDER, W/ DIGITAL READOUTS, ETC., OPERATOR CONTROL STAND, OVERHEAD MEZZANINE FOR STORAGE OF POWER SUPPLIES; APPROX. 120' LINEAR FEET OF 8' POWER ROLL CONVEYOR (HYDRAULIC), INCLUDING MANUAL TACKING STATION, UTILIZING MILLER CP- 302 POWER SUPPLY; APPROX. 45' EXIT POWER ROLL CONVEYOR, 8' WIDTH; 5-STRAND BEAM TRANSFER CONVEYOR, APPROX. 25'L 1 COFFING 1-TON CAPACITY HOIST, CHAIN TYPE, 4- BUTTON PENDANT CONTROL. 1 CM LOADSTAR HOIST, 2-TON CAPACITY, CHAIN TYPE, 4-BUTTON PENDANT CONTROL, LOCATED ON JIB CRANE. 1 HANKISON AIR DRYER, INCLUDING AIR RECEIVING TANK. 1 UNIT #20, QUINCY MODEL QST30NA32S0 ROTARY SCREW AIR COMPRESSOR, S/N 98153H, 30-HP, 302,853 HOURS INDICATED; NOT INSTALLED AT TIME OF INSPECTION 1 SULLAIR MODEL LS160-75H/A ROTARY SCREW AIR COMPRESSOR, S/N (2007), 75-HP, SKID MOUNTED W/ AFTER COOLER, INCLUDING SUPERVISOR CONTROLLER. 1 MAGNUM YARD SPOTTER, VIN #T1W4L1E0SB1AA4298, AUTOMATIC TRANSMISSION, DIESEL, SINGLE FIXED AXLE, ENCLOSED CAB, 6398 MILES INDICATED. 1 ASSET #5, NISSAN, MODEL & S/N NA, EST. 5,000-LB. CAPACITY, LPG, ROPS, SOLID TIRES, 3-STAGE MAST, 907 HOURS INDICATED. 6 BEAM TRANSFER CONVEYORS, W/ (3) ADJUSTABLE STANDS, FLOOR MOUNTED, 12' x 30' 10 MILLER MODEL DELTAWELD 452 WELDERS, S/N'S N/A, EACH W/ MILLER R-115 BOOM MOUNTED WIRE FEEDER. LOT OVERHEAD MATERIAL HANDLING TO INCLUDE: (3) BRIDGE CRANES, W/BOTTOM RIDING HOISTS; (12) WALL MOUNTED JIBS. Page 3 of 12

4 1 L&J MODEL W60 OBI PUNCH PRESS, S/N 50B157A, 60-TON CAPACITY, 36" x 24" BOLSTER, 4" STROKE, 3" ADJUSTMENT, 11" SHUT HEIGHT, AIR CLUTCH, W/ DUAL SAFETY PALM SWITCHES; TRANSFERRED FROM ALABAMA LOCATION, NOT INSTALLED AT TIME OF INSPECTION 1 SPECIAL MANUFACTURED HYDRAULIC H-FRAME STRAIGHTENING PRESS, 48" OPENING, STAND ALONE HYDRAULIC UNIT, EST. 10-HP. 1 SHOP BUILT BENDING PRESS, DOWN ACTING, 20" MAX. WIDTH, W/ STAND ALONE HYDRAULIC UNIT, EST. 5-HP 1 UNI-HYDRO MODEL HYDRAULIC IRONWORKER, S/N 3P9572X, 95-TON, 15" THROAT ON PUNCH, 4.5" NOTCH, 7" ANGLE, W/ GRAVITY ROLL INFEED CONVEYOR, 18" WIDTH, 20'L. 1 CALDWELL MODEL UNIVAC-330 PLATE LIFTER, S/N 44314, VACUUM TYPE, 3-CUP, APPROX. 15'L. 1 GEKA MODEL HYDRACROP 110-SD CNC HYDRAULIC IRONWORKER, S/N (2006), 6.5" x 6.5" x 1.5" ANGLE SHEAR, 24" x 5/8" CHANNEL, 2" DIA. TUBE, 2" DIA. PIPE, W/ FAGOR CNC CONTROLS, S/N 2065; INCLUDING APPROX. 30' GRAVITY ROLLER INFEED CONVEYOR. 1 HYDRAULIC PUNCH, C-FRAME, 6" THROAT, W/ SHOP BUILT TABLE MOUNTED ROLLER BALL TRANSFER CONVEYOR, HEAVY DUTY. 1 HYDRAULIC PUNCH, PORTABLE, C-FRAME, APPROX. 3" THROAT. 11 HARRINGTON ELECTRIC HOISTS, 2-TON CAPACITY, BOTTOM RIDING, CHAIN TYPE, 4-BUTTON PENDANT CONTROL 1 LINCOLN MODEL CV-300 WELDER, S/N N/A, W/ MILLER LN-7 WIRE FEEDER. 1 MILLER BRACKET WALL MOUNTED, MODEL AND S/N N/A, W/ MILLER 24-A WIRE FEEDER. 1 LINCOLN MODEL CV-400 WELDER, BRACKET WALL MOUNTED, W/ LINCOLN LN-7 WIRE FEEDER. 1 ASSET #W2, LINCOLN MODEL CV-300 WELDER, BRACKET WALL MOUNTED, W/ LINCOLN LN-7 BOOM MOUNTED WIRE FEEDER. 1 ASSET #W4, LINCOLN MODEL CV-300 WELDER, BRACKET WALL MOUNTED, W/ LINCOLN LN-7 BOOM MOUNTED WIRE FEEDER. 1 MILLER MODEL DELTAWELD 452 WELDER, BRACKET WALL MOUNTED; W/ MILLER R-115 BOOM MOUNTED WIRE FEEDER. Page 4 of 12

5 1 TRANSFER CONVEYOR, APPROX. 240 LINEAR FT., POWER ROLL, 8'W, USED TO TRANSFER BEAMS. 1 BEAM TRANSFER CONVEYOR, CHAIN DRIVEN, SHUTTLE BEAM TOP, APPROX. 6'W. 1 SPECIAL MANUFACTURED SPRAY AREA, CONSISTING OF: (2) FILTERED EXHAUST FANS, EACH W/ (6) APPROX. 4' x 4' FILTER, W/ ACCESS TO BOTH SIDES 1 ASSET #UNIT 08, UNI-HYDRO IRONWORKER, 42- TON, S/N 3P35027, MAX. ANGLE CUT 3" x 3" x 5/16", W/ HYDRAULIC PUNCH, 6" THROAT. 1 W.A. WHITNEY MODEL HYDRAULIC PUNCH, S/N , C-FRAME, 96-TON CAPACITY, 6" THROAT, W/ STAND ALONE HYDRAULIC UNIT. 1 IN-HOUSE FABRICATED PLATE MAKING LINE, TO INCLUDE: (1) 20" MAX. WIDTH HYDRAULIC SHEAR, W/ STAND ALONE HEAVY DUTY HYDRAULIC UNIT, W/ RESERVOIR, DIRECTIONAL VALVES, ETC.; (2) CENTERING STATIONS; (1) POWER ROLL FEEDER; APPROX. 21' POWER ROLL CONVEYOR, 24"W; STAND ALONE SHOP ADDED ALLEN BRADLEY PLC PANELVIEW 550 CONTROLS. 1 W.A. WHITNEY HYDRAULIC ANGLE SHEAR, LOCATED OVER COLLECTION BIN, EST. 90-TON CAPACITY, W/ POWER ROLL INFEED AND EXIT CONVEYOR. 1 DAKE/JOHNSON MODEL JH10 HORIZONTAL BAND SAW, S/N , W/ INFEED AND EXIT GRAVITY ROLLER CONVEYOR. 1 ASSET #W8, MILLER MODEL CP-250TS WELDER, S/N HJ (1978), W/ BOOM MOUNTED WIRE FEEDER. 1 TRANSFER CONVEYOR, CHAIN DRIVE, BEAM SHUTTLE TYPE, APPROX. 4'W, TO FEED PAINT AREA 2 HARRINGTON ELECTRIC HOISTS, 2-TON CAPACITY, LOCATED ON FIXED BEAM. 2 CM LOADSTAR CHAIN HOISTS, 2-TON, 4-BUTTON PENDANT CONTROL, SUSPENDED FROM JIB CRANE 2 HARRINGTON CHAIN HOISTS, 2-TON, 4-BUTTON PENDANT CONTROL, SUSPENDED FROM JIB CRANE 10 MILLER ASSORTED MODELS, INCLUDING CP-250TS, CP-300, EACH W/ BOOM MOUNTED WIRE FEEDER. 1 GRACO MODEL EXTREME K30 PAINT SPRAYER, CART MOUNTED, W/ HIGH PRESSURE HOSES, GUNS, ETC. Page 5 of 12

6 1 PNEUMATIC PAINT SPRAYER, CART MOUNTED, W/ HIGH PRESSURE HOSES, GUNS, ETC. 5 HARRINGTON 2-TON CHAIN HOIST, 4-BUTTON PENDANT CONTROL, SUSPENDED FROM JIB CRANE 1 MILLER MODEL CP302 WELDER, S/N LG090576C (2006), W/ BOOM MOUNTED MILLER 24-A WIRE FEEDER 1 MILLER MODEL CP302 WELDER, S/N N/A, W/ BOOM MOUNTED MILLER 24-A WIRE FEEDER 1 FICEP MODEL 1101 DZB BEAM DRILLING AND CUTOFF SYSTEM, S/N (2004), TO INCLUDE: APPROX. 75 LINEAR FT. FEED CONVEYOR, POWER ROLL, W/ (6) CROSS TRANSFER FEED CONVEYOR, SHUTTLE TYPE; W/ SIDE RAIL MOUNTED MEASURING DEVICE FICEP DRILLING UNIT, SINGLE HEAD, DUAL AXIS, APPROX. 30" x 48" MAX. OPENING, INCLUDING HYDRAULIC CLAMPING DEVICE FICEP HORIZONTAL BEAM BANDSAW, W/ HYDRAULIC CLAMP; CONTROLLED W/ FICEP CNC CONTROLS, ETC. APPROX. 120 LINEAR FT. EXIT CONVEYOR, POWER ROLL, INCLUDING 12-SECTION DRAG OUT CONVEYOR. LOT OVERHEAD MATERIAL HANDLING TO INCLUDE: (3) BRIDGE CRANES, W/BOTTOM RIDING HOISTS; (11) WALL MOUNTED JIBS. 1 TOYOTA MODEL 7FGU30 LIFT TRUCK, S/N 68789, 6,000-LB. CAPACITY, LPG, ROPS, TREADED SOLID TIRE, 3-STAGE MAST, W/ SIDE SHIFT. 1 GEKA MODEL HYDRACROP 110/A IRONWORKER, S/N (2008), W/ MAX. CAPACITY OF 6.5" x 6.5" x 1/2" ANGLE SHEAR, 2" TUBE/PIPE, HYDRAULIC PUNCH. 1 SULLAIR MODEL SR-400 AIR DRYER, S/N (2006), COMPLETE PACKAGE TYPE, SKID MOUNTED, NOT INSTALLED 1 SULLAIR MODEL 3709/A ROTARY SCREW AIR COMPRESSOR, S/N (2006), 75-HP, PACKAGE TYPE, NOT INSTALLED AT TIME OF INSPECTION. 1 WILLIAMS-WHITE-MOLINE HYDRAULIC GAP FRAME PRESS, S/N C-2509 (EST. 1950), 250-TON CAPACITY, APPROX. 30' BED, REPORTED BY PRINCIPAL OF NEVER OPERATED IN 10 YEARS, INCLUDING BENDING DIES 1 MILLER MODEL CP-250TS WELDER, W/ BOOM MOUNTED WIRE FEED, NOT IN USE AT TIME OF INSPECTION. 1 CATERPILLAR MODEL C6000 LIFT TRUCK, S/N AT85F10437, LPG, SOLID TIRE, ROPS, 3-STAGE MAST, HIGH REACH, W/ SIDE SHIFT, 1,389 HOURS INDICATED. Page 6 of 12

7 1 ASSET #W1, LINCOLN MODEL CV-300 WELDER, S/N , W/ LINCOLN LN-7 WIRE FEEDER, S/N U , NOT IN USE. 1 BUILT AND FABRICATED IN-HOUSE FLANGE WELDING LINE (BUTT WELD), TO INCLUDE: (2) FLANGE LOADING STATION, RAIL MOUNTED ROBOTS, MOTORIZED, APPROX. 24' SPAN, GANTRY TYPE, W/ 10-HEAD ELECTROMAGNETS, EACH W/ INDIVIDUAL CONTROL PANELS, W/ PLC CONTROLS APPROX. 56 LINEAR FT. POWER ROLL FEED CONVEYOR, 48"W, ELEVATED (1) 24"W HYDRAULIC SHEAR, W/ DETACHED HYDRAULIC UNIT, INCLUDING POWER FEEDER, ETC. (1) 24" MAX. WIDTH CAPACITY SINGLE HEAD SEAM WELDER (BUTT), W/ PNEUMATIC CLAMP, W/ LINCOLN DC600 POWER SUPPLY, W/ OVER STATION BRIDGE, INCLUDING FLUX SYSTEM, LINCOLN NA- 3N WIRE FEEDER; SINGLE OXYGEN ACETYLENE CUTOFF STATION. (1) APPROX. 50 LINEAR FT. RUN OUT CONVEYOR, POWER ROLL, W/ HYDRAULIC DUMPERS; NOT IN OPERATION, WAS INTENDED FOR OPERATION IN ALABAMA 1 MILLER MODEL CP-302 WELDER, S/N N/A, INCLUDING MILLER 24A WIRE FEEDER 1 WILTON HORIZONTAL BAND SAW, W/ SHOP BUILT TUBE STAND, ETC. 1 GENIE MODEL Z-34/22N BOOM LIFT, S/N Z34N (2005), ELECTRIC, W/ EXTENDABLE BOOM, 410 HOURS INDICATED. 1 MILLER MODEL CP250TS WELDER, S/N JK (1989), LOCATED ON SHOP BUILT PORTABLE BASE, INCLUDING PROFAX PRO II WIRE FEEDER 1 SCOTCHMAN CHOP SAW, 10", NOT IN SERVICE AT TIME OF INSPECTION 1 GEKA MODEL HYDRACROP 110/SD CNC IRONWORKER, S/N (2007), 120-TON CAPACITY, 6.5" x 6.5" x 1/2" ANGLE SHEAR, 2" PIPE AND TUBE CAPACITY, 24" THROAT PUNCH, W/ STAND ALONE CNC CONTROLS, S/N SNAPPER LAWN MOWER, 50", ZERO TURN, 24-HP. 1 LESCO LAWN MOWER, 48" CUT, WALK BEHIND, SELF PROPELLED, COMMERCIAL PLUS, W/ KAWASAKI ENGINE 1 SHOP PRESS, 30" OPENING. 22 WELDERS, MILLER AND LINDE, VARIOUS MODELS, NOT IN USE AT TIME OF INSPECTION. 1 GRACO MODEL EXTREME X30 PAINT SPRAYER, CART MOUNTED, NOT IN USE, SKID MOUNTED. Page 7 of 12

8 LOT MISCELLANEOUS EQUIPMENT, LOCATED IN REPAIR AREA, TO INCLUDE: SMALL PAINT PUMPS; BARREL LUBRICATORS; WALK BEHIND LAWN MOWER; PORTABLE CARTS; UTILITY CARTS; HEATERS; DRILL PRESSES; HAND TRUCKS; FLOOR FANS; HOSE CRIMPER; DOUBLE END GRINDER, ETC. LOT OVERHEAD MATERIAL HANDLING TO INCLUDE: (3) BRIDGE CRANES, W/BOTTOM RIDING HOISTS; (1) WALL MOUNTED JIBS. 1 WEIGH-TRONIX MODEL DSL PLATFORM SCALE, S/N 59276, 60" x 60", 20,000-LB. CAPACITY, W/ WEIGH-TRONIX WI-125 DIGITAL SCALE HEAD, S/N ASC Cee & Zee PURLIN LINE, TO INCLUDE: (1) ASC MACHINE TOOL, DOUBLE END EXPANDABLE MANDREL, EST. 20,000-LB. CAPACITY, 40" MAX. COIL WIDTH, 96" MAX. OD, EACH END W/ COIL PEELER (1) ASC MACHINE TOOL PINCH ROLL TOWER, S/N D27415, JOB #19974, W/ HYDRAULIC TILT, STAND ALONE HYDRAULIC UNIT; W/ EXIT TO ACCUMULATION PIT, W/ SINGLE HUMP TABLE (1) ASC MACHINE TOOL MODULAR BASE SUB ASSEMBLY, 7-STATION PUNCH, W/ SINGLE HYDRAULIC EXIT SHEAR; PREFEED 5-ROLL LEVELER/STRAIGHTENER, STAND ALONE HYDRAULIC UNIT, LOCATED ON MEZZANINE (1) ROACH POWER ROLL CONVEYOR, 36"W, 5- SECTION, APPROX. 50'L (1) ASC HORIZONTAL ALIGNMENT STAND, W/ PINCH ROLL, APPROX. 32"W CAPACITY, W/ MANUAL OVERRIDES (1) ASC MACHINE TOOL 14-STAND ROLL FORMER (C & Z), EST. 24" CENTER TO CENTER STAND, APPROX. 32" MAX. WIDTH CAPACITY, GEAR DRIVEN; W/ ADDITIONAL 6-STAND JACK UP EAVE ROLL FORMER, EST. 24" CENTER TO CENTER ROLLS, EST. 30"W (1) POWER ROLL EXIT CONVEYOR, APPROX. 45', FOR MANUAL STACKING (1) OPERATOR CONTROL STAND, W/ PLC CONTROLS, FAULT LIGHT INDICATORS, INTERFACED TO PC MONITOR; W/ MANUAL OVERRIDES. 1 ASSET #PR2, ROUSELLE MODEL 4 OBI PUNCH PRESS, S/N 26389, 40-TON, 3" STROKE, 12" SHUT HEIGHT, 3.5" ADJUSTMENT, 105 STROKES/MIN, 17" x 28" BED, W/ DUAL AND SAFETY SWITCH; INCLUDING INFEED CONVEYOR AND EXIT SUPPORT STAND 1 CLEVELAND STEEL TOOLS HYDRAULIC PUNCH, 35- TON CAPACITY, PORTABLE, LOCATED ON HEAVY DUTY I-BEAM, STAND ALONE HYDRAULIC UNIT 1 W.A. WHITNEY MODEL HYDRAULIC NOTCHER, S/N , 18-TON CAPACITY, 6", LOCATED ON SHOP BUILT STAND, W/ DETACHED HYDRAULIC UNIT. 1 MILLER MODEL DELTAWELD 452 WELDER, S/N LG180057C (2006), W/ MILLER 24A BOOM MOUNTED WIRE FEEDER. 1 KYSOR/JOHNSON MODEL J HORIZONTAL BAND SAW, S/N 20285, W/ INFEED AND EXIT GRAVITY ROLLER CONVEYOR. 1 GRACO PAINT SPRAYER, HEAVY DUTY, CART MOUNTED, W/ PRESSURE HOSES. Page 8 of 12

9 1 OTTAWA MODEL 30 YARD SPOTTER, S/N (2000), AUTOMATIC TRANSMISSION, 20,395 MILES INDICATED, ENCLOSED CAB, SINGLE AXLE. 1 TOYOTA MODEL 7FGU30 LIFT TRUCK, S/N 68238, 66,000 LB. CAPACITY, LPG, SOLID TIRE, ROPS, 3- STAGE MAST, W/ SIDESHIFT. LOT OVERHEAD MATERIAL HANDLING TO INCLUDE: (3) BRIDGE CRANES, W/BOTTOM RIDING HOISTS; (1) WALL MOUNTED JIBS. 10 PALLET RACKS, 48" x 8' x 12', 2-TIER. 1 CANTILEVER RACK, DOUBLE SIDED, (2) VERTICAL STANDARDS, APPROX. 7' x 6' x 7', 5-TIER. 8 PALLET RACKS, 4' x 8' x 8', 2- AND 3-TIER, W/ METAL SHELF SUPPORTS 1 SLITTING LINE, TO INCLUDE: (1) ASC SINGLE END EXPANDABLE MANDREL UNCOILER, S/N SAU-0M48H1821H200, JOB #JN-16116, HYDRAULIC, 48" MAX. COIL WIDTH, 96" MAX. OD, W/ DANCER BAR, 20,000-LB. CAPACITY (1) JORNS AG MODEL LC-RO-SA SLITTER, S/N (2001), 48" MAX. WIDTH, W/ 4" DIA. ARBOR, AUTO FEET COUNTER (1) 2-STRAND SIDE BY SIDE APPROX. 20" GRAVITY ROLLER CONVEYOR, 21'L, LOCATED ON PORTABLE SHOP BUILT TABLE (1) JORNS AG MODEL LC-AWH T0 RECOILER, S/N (2001), INCLUDING SEPERATOR STAND, ETC. (1) BRADBURY MODEL COILER/UNCOILER, S/N B000720, 20,000-LB. CAPACITY, 48" SINGLE END EXPANDABLE MANDREL W/ SEPERATION ARM (1) HAYES TRACK FLOOR MOUNTED COIL CAR, S/N A1444, EST. 20,000-LB. CAPACITY. 1 CUT-TO-LENGTH LINE, TO INCLUDE: (1) JORNS MODEL LC-AH UNCOILER, S/N (2002), SINGLE END EXPANDABLE MANDREL, 42" MAX. COIL WIDTH, 60" MAX. OD, W/ DANCER BAR (1) 52" MAX. SHEAR, W/ SINGLE ROLL PROTECTIVE COATING LAMINATION ROLL; SHOP BUILT EXIT TABLE, APPROX. 20'L, PORTABLE (1) ASC CNC-500 CONTROLS. 1 SLITTER, 48" MAX. WIDTH, APPROX. 4' ARBOR, LOCATED ON SHOP BUILT HEAVY DUTY STAND; APPROX. 20' EXIT PORTABLE TABLE 1 ENGEL MODEL HB-800B-20 ROLL FORMER, S/N (DUPLEX), 8-STAND, 20-GAUGE; W/ SHOP BUILT 20' INFEED AND EXIT PORTABLE TABLES 1 BRADBURY MODEL FOLDER 14-33' x 14-GAGE CNC HYDRAULIC LONG FOLDER PANEL FORMER, S/N B (2006), NOT IN OPERATION AT TIME OF INSPECTION. Page 9 of 12

10 1 BRADBURY MODEL FOLDER 20'-18 GAGE CNC HYDRAULIC LONG FOLDER PANEL FORMER, S/N B (2006), W/ BECK AUTOMATION CNC CONTROLS. 1 JORNS MODEL MAXI-MULTI-LINE-200-SO- CNC400A-8 CNC LONG FOLDER PANEL FORMER, S/N (1998), 25', 14-GAGE, W/ STAND ALONE BECK AUTOMATION CNC CONTROLS. 1 JOBSITE DOWN SPOUT/ELBOW LINE, APPROX. 2004/2005, TO INCLUDE: (1) JOBSITE SINGLE END EXPANDABLE MANDREL PD6 UNCOILER, 20" MAX. WIDTH CAPACITY, 60" MAX. OD, POWERED, ETC. (1) CTMe45 ROLL FORMER, 14-STAND, ENCLOSED W/ EXIT 11-STAND FORMER, W/ HYDRAULIC CRIMPER; ALLEN BRADLEY PANELVIEW PLUS 600 CNC CONTROLS. 1 ADIRA MODEL GHS-0630 HYDRAULIC SHEAR, S/N 2626/7354B (1994), 10' x 1/4" CAPACITY, MANUAL LOAD, W/ MANUAL ADJUST BACK GAGE, NOT IN OPERATION AT TIME OF INSPECTION. 1 ROPER WHITNEY/PEXTO MODEL PH4528 SHEAR, S/N (1992), 16-GAUGE, 52", MANUAL BACK GAUGE. 1 MHC INDUSTRIAL SUPPLY MODEL 4816 PAN BOX BRAKE, S/N (2006), 48", MANUAL, W/ INTERCHANGABLE BENDING FINGERS LOT OVERHEAD MATERIAL HANDLING TO INCLUDE: (3) BRIDGE CRANES, W/BOTTOM RIDING HOISTS; (1) WALL MOUNTED JIBS. 1 CAPACITY MODEL TJ 5000 YARD SPOTTER, S/N B-1806, (1997), IN REPAIR AT TIME OF INSPECTION 1 HYSTER MODEL S120XL LIFT TRUCK, S/N #D004D03730U, LPG, ROPS, SOLID TIRE, 2-STAGE MAST, SIDESHIFT, 7,865 HOURS INDICATED; IN REPAIR AT TIME OF INSPECTION 1 TOYOTA MODEL 7FGCU55 LIFT TRUCK, S/N 61026, 10,500-LB. CAPACITY, ROPS, LPG, SOLID TIRE, 2- STAGE MAST, W/ SIDE SHIFT, IN REPAIR AT TIME OF INSPECTION 1 ROPER WHITNEY/PEXTO MODEL PH4528 SHEAR, S/N S (1991), 18-GAUGE, MANUAL FEED, FOOT ACTIVATED (WALL PANEL DIE) 1 4-POST PRESS, (RESEMBLES AIR RAM) MANUFACTURE (PLATE REMOVED), PNEUMATIC, 40" MAX. WIDTH CAPACITY, W/ SHOP BUILT INFEED AND EXIT TABLE. 1 SPECIAL MANUFACTURED HYDRAULIC BENDING BRAKE, 40" MAX. WIDTH, (RIDGE CAPS), STAND ALONE HYDRAULIC UNIT, W/ PANEL DIE Page 10 of 12

11 1 ROOF/WALL PANEL FORMING LINE, 24-GAUGE CAPACITY, (DUAL HEIGHT), APPROX. 10 YEARS OLD, W/ R & M PANEL FORMS, 200 FEET/MIN, TO INCLUDE: (1) ASC MODEL DAU-20M48H1821H200 UNCOILER, EST. 20,000-LB. CAPACITY, DOUBLE END EXPANDABLE MANDREL, 48" MAX. WIDTH CAPACITY, APPROX. 96" MAX. OD (1) UNI RAIL MOUNTED COIL CHIPPER/LOADER, S/N CLC 289 (1974), EST. 20,000-LB. CAPACITY (1) ASC FEED ROLL ASSEMBLY, S/N M BH52FRS SC, 52", W/ EXIT PINCH ROLL AND INLINE HYDRAULIC SHEAR (1) HUMP TABLE, W/ MANUAL ADJUST, AUTO FEEDS, ALL ENCLOSED IN SAFETY CAGE ENCLOSURE (1) ASC MODEL CAS-DH /15 ROLL FORMER, 16-STATION R PANEL FORMER, 16-STAND M PANEL ROLLER, DUAL HEIGHT, 20" CENTER TO CENTER STAND, MANUAL ADJUSTMENTS, 2" ARBOR, W/ SAFETY CURTAIN, ETC. (1) APPROX. 50' EXIT CONVEYOR/STACKER W/ PNEUMATIC HORIZONTAL PILE PUSHER (1) ASC CNC 500 CONTROLLER. 1 ZIMMERMAN SOFFIT PANEL FORMER, S/N (2006), PORTABLE, 24" MAX. WIDTH, HYDRAULIC, ENCLOSED UNIT, INCLUDING (1) 24" MAX. WIDTH CENTERING REEL; EXIT 24" WIDTH CUTOFF; 2- SECTION GRAVITY ROLLER EXIT CONVEYOR; ASC CNC-500 CONTROL SYSTEM. 1 ROOF PANEL LINE, 18" AND 24" (HIGH TECH/STANDING SEAM), TO INCLUDE: (1) UMI HYDRAULIC DOUBLE END EXPANDABLE MANDREL UNCOILER, S/N CPR-245 (1974), 36" MAX. COIL WIDTH, W/ 90" MAX. OD COIL, STAND ALONE HYDRAULIC UNIT, W/ SHARED TRACK MOUNTED UMI COIL TIPPER (1) ASC FEED/BRAKE/HUMP TABLE, EST. 24" MAX. WIDTH CAPACITY, INCLUDING INLINE ASC HYDRAULIC SHEAR (1) ASC ROLL FORMER, 16-STAND, W/ ADDITIONAL SET OF 18-STAND FORMING ROLLS, APPROX. 20" CENTERS BETWEEN ROLLS, MANUAL ADJUSTMENTS; W/ SINGLE NOZZLE SEALER APPLICATOR, UTILIZING PROFLEX DISPENSING UNIT (1) APPROX. 50' GRAVITY EXIT ROLLER CONVEYOR, W/ MANUAL PACKING TRANSFER CONVEYORS (1) ASC CNC-500 CONTROLS, W/ VARIOUS FAULT LIGHT INDICATORS. 1 ASC MODEL DAU-10M48H1824H200 DOUBLE END EXPANDABLE MANDREL UNCOILER, JOB #199959, HYDRAULIC, 48" MAX. COIL WIDTH CAPACITY, 60" MAX. OD, NOT INSTALLED AT TIME OF INSPECTION. 1 COIL TIPPER, 5-TON CAPACITY, HYDRAULIC, 48" x 48", MECHANICAL 1 CATERPILLAR MODEL GC55K-LP LIFT TRUCK, S/N AT88A10257 (2007), 12,000-LB. CAPACITY, LPG, ROPS, SOLID TIRE, 2-STAGE MAST, W/ SIDE SHIFT, 2,297 HOURS INDICATED. LOT OVERHEAD MATERIAL HANDLING TO INCLUDE: (4) BRIDGE CRANES, W/BOTTOM RIDING HOISTS; (1) WALL MOUNTED JIBS. Page 11 of 12

12 LOT MISCELLANEOUS EQUIPMENT, LOCATED IN PRODUCTION AREAS, INCLUDING, BUT NOT LIMITED TO: WORK STATIONS; WAREHOUSE LADDERS; MEDIUM DUTY SHELVING SECTIONS; BANDING SETS; SELF DUMPING HOPPERS; SHOP BUILT RACKS; CHOP SAWS; ETC. LOT MISCELLANEOUS OFFICE FURNITURE AND OFFICE EQUIPMENT TO INCLUDE BUT NOT LIMITED TO: DESKS; CHAIRS; FILES; EXECUTIVE OFFICES, AND CONFERENCE ROOM; ASSORTED COMPUTERS; PRINTERS. Page 12 of 12