SUPERIOR FABRICATORS

Transcription

1 LARGE CAPACITY PLATE AND STRUCTURAL FABRICATING FACILITY INCLUDING (7) MANIPULATORS, (6) TANK TURNING ROLLS AND (55) WELDERS TO 2008, PLATE ROLLS, ANGLE ROLL, BRAKE, SHEAR AND SUPPORT EQUIPMENT See Instructions on Page 4 To Become a Qualified Bidder on the Internet The Former Property of SUPERIOR FABRICATORS 155 Gordy Street - Baldwin, Louisiana Miles Southeast of Lafayette, Louisiana SALE DATE: THURSDAY, NOV. 14TH, STARTING AT 9:00 AM INSPECTION: WEDNESDAY, NOV. 13TH FROM 10:00 AM TO 4:00 PM 6 X 6 X 7/8 Buffalo Angle Roll (5) Romar RM3025 Track Mount Welding Manipulators (To 2007) (50+) Lincoln & Miller Welders (To 2008) (5) Sets 45 Ton Romar Tank Rolls 1-7/8 X 10 Webb Model 24L Mechanical Plate Bending Roll CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers appraisers since 1961 Cincinnati Industrial Auctioneers 2020 Dunlap St., Cincinnati, Ohio Phone Fax cia-auction.com info@cia-auction.com (2) Galion FA-150 Cranes Plant & Machinery, Inc W. Sam Houston Pwky N., Suite A130 Houston, Texas Phone Fax pmi-auction.com pmi@pmi-auction.com

2 THURSDAY, NOVEMBER 14TH /2007 (2) Romar Model 3025M-HD-TC-M Track Mount Welding Manipulators 2006 (2) Romar Model RM3025 Track Mount Manipulator Romar Model RM3025-TCM Track Mount Welding Manipulator 2005 WELDING MANIPULATORS (2) Romar Model RM3025 Track Mount Manipulator; S/N 6112 (2007) and 5115 (2006), 96 V-Travel, 96 H- Travel, Height 13 3, 66 Wide X 60 Long Track, 1,000 Amp Lincoln Idealarc DC-1000 Welding Power Source, Lincoln NA-3N Wire Feed Control, Sub-Arc Systems, jeffjr@cia-auction.com for drawing from manufacturer (New 2006/2007) (2) Romar Model 3025M-HD-TC-M Track Mount Welding Manipulators; S/N B and C, 96 V-Travel, 96 H-Travel, 58 Wide X 65 Long Track, 1,000 Amp Lincoln Idealarc DC-1000 Welding Power Source, Lincoln Model NA- 38 Solid State Automatic Wire Feeders, Sub- Arc Systems, jeffjr@cia-auction.com for drawing from manufacturer (New 2005) Romar Model RM3025-TCM Track Mount Welding Manipulator; S/N 5164, 96 V-Travel, 96 H-Travel, Height 13 3, 60 Wide X 75 Long Track, 1,000 Amp Lincoln Idealarc DC-1000 Welding Power Source, Lincoln NA-3N Wire Feed Control, Sub-Arc System, jeffjr@cia-auction.com for drawing from manufacturer (New 2006) 10 X 10 Pandjiris Model CAR Track Mount Welding Manipulator; S/N , 58 Wide X 70 Long Track, 1,000 Amp Lincoln DC-1000 Welding Power Source, Lincoln NA-3A Wire Feed Control, Sub-Arc System (2) Romar Model 3025M-HD-TC-M Track Mount Welding Manipulators TO BE SOLD VIA PHOTO Esab Model MKR-300 3X3 MTR Welding Manipulator; S/N A , 3 Meter Column, 3 Meter Boom, ESAB Model LAF 1000 DC Power Source, Weld Engineering Mighty-Mac X Heavy-Duty Flux Vacuum System, A2-A6 Process Controller, RCC Pendant, Wire Feeder, Boom Platform, Floor Rails, Located in Cincinnati, Ohio jeffjr@cia-auction.com for more info / photos (New 2000) 10 X 10 Pandjiris Model CAR Track Mount Welding Manipulator Close Up View Romar Manipulator Welding Equipment

3 SUPERIOR FABRICATORS 2006/ /2008 (5) 45 Ton / 30 Metric Ton Romar Model PR30/45DM Motorized Tank Turning Roll Sets w/ Idlers (18) 450 Amp Miller Dimension 452 Mig Welders with Miller 22A and 24A Wire Feeders 8 X 8 Pandjiris Model CAR Track Mount Welding Manipulator; Shop Order # , 1,000 Amp Lincoln DC-1000 Welding Power Source, Lincoln Model NA-3N Wire Feed Control, Sub-Arc System, 58 Wide X 50 Long Track TANK TURNING ROLLS (5) 45 Ton / 30 Metric Ton Romar Model PR30/45DM Motorized Tank Turning Roll Sets w/ Idlers; S/N 5994D, 5165D, 4800D, SE13107D and N/A, 45 Metric Ton Turning Capacity, 30 Metric Ton Load Capacity, 6-1/2 Wide X 20 Diameter Rolls, Adjustable From 24 to 84 Width, jeffjr@cia-auction.com for drawing from manufacturer (New 2006/2007) 30 Ton (Est.) Pandjiris Model 1R- 60 Motorized Tank Turning Roll Sets w/ Idlers; S/N , 20 X 16 Rolls, Adjustable From 24 to 60 Width 30 Ton (Est.) Pandjiris Motorized Tank Turning Roll Sets w/ Idlers; S/N N/A, Power and Idler Units, 20-1/2 X 7 X 17-3/4 Rolls, Adjustable from 24 to 60 Width WELDERS (32) 400 Amp Lincoln Idealarc DC- 400 Mig Welders with Lincoln LF72 and LN7 Wire Feeders; Newer Black Tag Example Serial Numbers U and U , Older White Tag Example Serial Numbers AC and AC See Auction Catalog for Exact Serial Numbers (New to 2000 s) (18) 450 Amp Miller Dimension 452 Mig Welders with Miller 22A and 24A Wire Feeders; Example Serials Include LJ011109C and LH170192C, See Auction Catalog for Exact Serial Numbers (New 2007/2008) (4) 1,200 Amp Lincoln Idealarc AC-1200 Variable Voltage Welding Power Sources; Example Serial Numbers U and U (New 2005) (4) Lincoln Invertec V350-Pro Mig Welders WELD HEATERS (18) PDS Corp. 6-Zone WeldHeat Treat Consoles for Pre-Heat or Post-Heat; Rated at Approx. 75 KVA, All Purchased from 2006 to 2010 at Approx. Cost of $18,000 each (New to 2010) (5) PDS Corp. 9-Zone Weld Heat Treat Consoles for Pre-Heat or Post-Heat; Rated at Approx. 100 KVA, All Purchased from 2006 to 2010 at Approx. Cost of $18,000 each (New to 2010) Large Quantity Heavy Fabricated Steel Heater Pads WELDING EQUIPMENT Aronson Model RAB 15VS-DAC Motorized Welding Positioner; S/N 829, 9,000 Lbs. In Rotation and 15,000 Lbs. In Tilt Phoenix Type 750HT / Model 5 Rod Oven (2) Henkel Model K450 Rod Ovens (10) Henkel Flux Ovens Thermal Dynamics Thermal Arc Pak44 Plasma Cutter Thermal Dynamics Thermal Arc Pak 10XR Plasma Cutter (8) Bug-O Track Burners (6) Oxy / Acetylene Circular Type Bevellers up to 24 (20) Lincoln Model LN-7 Wire Feeders Large Quantity Welding Supplies and Equipment Including; Heavy Fabricated Saw Horses, Welding Tables and Fixtures, (80) Boxes of Various Size Welding Rod by Hobart, ESAB and Lincoln, (75) Spools of Various Size Welding Wire by Auest, Lincoln and ESAB, (50) Bags Lincoln No. 860 Flux, Various Size Welding Clamps, Vise Grip Clamps, Torch Tips, Welder Repair Parts and Related Items TO 2000 s (32) 400 Amp Lincoln Idealarc DC-400 Mig Welders with Lincoln LF72 and LN7 Wire Feeders 2005 (4) 1,200 Amp Lincoln Idealarc AC-1200 Variable Voltage Welding Power Sources AS 2010 (22) PDS Corp 9-Zone and 6-Zone Weld Heaters LATE MODEL Large Quantity Welding Supplies, Tools, and Accessories Bank View (22) Weld Heaters and (13) Various Rod Ovens

4 THURSDAY, NOVEMBER 14TH 600 Ton X 12 Pacific Hydraulic Press Brake 1-7/8 X 10 Webb Model 24L Mechanical Plate Bending Roll PLATE BENDING ROLLS 1-7/8 X 10 Webb Model 24L Mechanical Plate Bending Roll; S/N 5151W24, 10-2 X 1-3/4 Capacity, 24 Dia. Top and Rear Rolls, 75 HP Main Drive and 30 HP Auxiliary Motors, Rated at Per Minute 3/4 (Est.) X 10 Mfg. Unknown Mechanical Plate Bending Roll; 13 Diameter Top X 12 Diameter Bottom Rolls 1/4 (Est.) X 8 Kniles and Jones Mechanical Plate Bending Rolls ANGLE BENDING ROLL 6 X 6 X 7/8 Buffalo No. 3 Horizontal Angle Bending Roll; Drawing No. 8T-21233, Angles Leg Out 6 X 6 X 7/8 to Max Diameter 60, Angles Leg In 5 X 5 X 7/8 to Max Diameter 66, Beams on Flanges 12-30#, Channels Flange Out 12-30#, Channels Flange In 10-24#, Rounds and Squares 3-1/4-3, Heavy Pipe 4-1/2, 30 HP Motor, 1,200 RPM, Code AHSEN (3) Sets of Various Style Angle and Pipe Tooling PRESS BRAKE 600 Ton X 12 Pacific Hydraulic Press Brake; S/N N/A, 144 Overall Bed and Ram, 122 Between Side Frames, Foot Pedal (Approx. 1962) Heavy Press Brake Punches and Dies Including; (1) 144 X 8 4-Way Die and (1) 120 V-Grove Die and Punch SQUARING SHEAR 3/8 X 10 Pacific Model 375HD Hydraulic Power Squaring Shear; S/N , Foot Pedal Control, Manual Back Gage IRONWORKER Buffalo No. 2-1/2 Unistructual Mechanical Iron Worker; S/N 63Y0473, 1-5/8 X 1 1-7/16 X 7/8 Punch, 6 X 6 X 1/2 4 X 4 X 1/2 Angles, 2-1/4 Rounds, 2 Square COLD SAW 24 Trennjager Model PMC8 Upacting Mitre Head Cold Saw; S/N GF489, 440 Volt, 19 Under Frame, 30 Blade Travel RADIAL ARM DRILLS 9 Arm X 17 Column X 45 Track Cincinnati Bickford Super Service Track Mounted Radial Arm Drill; S/N 6E-813, 10-1,250 RPM, 60 Wide X 45 Rail Track System 8 Arm X 15 Column American Hole Wizard Radial Arm Drill; 15 1,200 RPM, 58 X 120 Work Table Large Quantity of Morse Taper Large Capacity HS Drills MISC. MACHINERY Miscellaneous Machinery Consisting of; 12 X 18 Wells Model 1118 Horizontal Band Saw, Cincinnati No. 2 Tool and Cutter Grinder, 2HP Oliver Model 600 Drill Point Grinder, Ridgid Model 535 Powered Pipe Threader, 10 Jet 1-1/2 HP DE Grinder, 5 HP Worthington Air Compressor w/ 100 Gal. Tank Mounted on Portable Skid LIFT TRUCKS 6,000 LB Hyster Model S60FT LP Gas Cushion Tire Lift Truck; S/N F187V14728G, 89/211 Triple Stage Mast, Side Shift, Fork Positioner (New 2009) 5,000 LB Hyster Model S50FT LP Gas Cushion Tire Lift Truck; S/N F187V14703G, 87/200 Triple Stage Mast, Side Shift (New 2009) (2) 5,000 LB Hyster Model S50XM LP Gas Cushion Tire Lift Trucks; S/N D187V29005A and D187V29002A, 83/189 Triple Stage Mast, Side Shift (New 2003) 4,000 LB Hyster Model S40XM LP Gas Cushion Tire Lift Truck; S/N C010H06732X, 82/127 Standard Mast (New 2000) 3/8 X 10 Pacific Model 375HD Hydraulic Power Squaring Shear 3/4 (Est.) X 10 Mfg. Unknown Mechanical Plate Bending Roll WEBCAST BIDDER INSTRUCTIONS All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period. There is a 18% Buyer s Premium in Effect for All Online Purchases. We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer s Premium. No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than 48-Hours Prior to the Start of the Auction. 9 Arm X 17 Column X 45 Track Cincinnati Bickford Super Service Track Mounted Radial Arm Drill 6 X 6 X 7/8 Buffalo No. 3 Horizontal Angle Bending Roll 24 Trennjager Model PMC8 Buffalo No. 2-1/2 Upacting Mitre Head Cold Unistructual Mechanical Saw Iron Worker

5 THURSDAY, NOVEMBER 14TH ,000 LB Hyster Model S60FT LP Gas Cushion Tire Lift Truck (New 2009) 15 Ton Galion Model 150FA Rubber Tire Hydraulic Crane RUBBER TIRE CRANES 15 Ton Galion Model 150FA Rubber Tire Hydraulic Crane; S/N U009600, Crane Rated at 10 Radius with Max Payload, 3-Sections Power Boom, Load Ratings From 10 36, Working Radius at 10 with Outrigger to 30,000 Lb., 36 Radius at 6,200 Lb., Hydraulic Outriggers, Max Horizontal Reach 37-6, 360 Degrees Swing Rotation, Elevation Max 70 Degrees, 121 HP, Komatsu 6-Cylinder Diesel Engine, Tires, 3,911 Hours Showing (Approx. Mid 1980 s) 15 Ton Galion Model 150 Rubber Tire Hydraulic Crane; S/N N/A, 3- Section Power Boom, Komatsu 6- Cylinder Diesel Engine, Estimated Load Rating is 30,000 Lb. at 10 Radius with Outriggers TRUCKS, TRACTOR AND TRAILER 2002 Chevrolet Model Z-66 Avalanche 4-Door SUV; VIN# 3GNEC13T72G225854, Full Power, Vortec V-8 Gas Engine, 159,473 Miles 1986 International Model F9370 Oilfield Type Tandem Axle Twin Screw Road Tractor; VIN# 2H8FBJUR4GCA13124, Eaton Transmission, 2-Speed Rear Axle Hydraulic Winch, Headache Rack 40 Long X 8 Wide Mfg. Unknown Tandem Axle Flat Bed Trailer; Diamond Plate Steel Bed Covering Kubota Model L260 Tractor; 2- Wheel Drive, Standard 8-Speed Transmission, PTO, 3 Part Hitch, with 60 Wide Bush Hog Attachment JACK SYSTEM AND LIFTING EQUIPMENT (2) 664 Ton Simplex Hydraulic Jacks w/ Electric Pump System; 16 Diameter X 26 Tall, with Power Team Electric Power Pack Large Quantity Lifting Equipment to Support a Heavy Fabrication Operation Consisting of; 53 Wide X 16 Long Heavy Steel Transfer Cart, 25 Ton and (2) 7 Ton I-Beam Type Crane Spreader Bars, 48 Crane Type Pallet Forks, Sheet Lifting Clamps up to 10 Ton, Shackles, (10) Enerpac Hydraulic Pumps, (10) Various Capacities Jacks, 25 Ton Bottle Jack, Chain Falls, Hooks and Other Related Items SHOP AND SUPPORT EQUIPMENT Large Quantity of Shop Equipment Including; (4) Mag Base Drills, Ridgid and Porter Cable Porta Band Saws, Abrasive Chop Saw, (60) Dewalt Electric Angle Grinders, Oversize Wrenches and Sockets, Electric Die Grinders, Assorted Hand Tools, Pneumatic Tools, Shop Fans, Benches with Vises, Steel Shelving and Cabinets, 60 Steel Horses and Many Other Related Items Large Maintenance Crib with Electrical, Plumbing, Hydraulics and Mechanical Repair Parts, Hardware and Other Items STEEL INVENTORY (10) Sheets of Stainless Steel Plate Including; (2) 96 X 16 X 3/8, (2) 60 X 20 X 3/8 and (8) Other Various Sizes (10) Sheets of Carbon Steel Plates Including; (10) 65 X 20 X 1-1/4, (1) 12 X 20 X 3/8, (1) 8 X 20 X 3/8, and (7) Other Various Sizes Rounded Alloy Steel Barge / Rig Support Leg Pieces Large Quantity Heavy Steel Floor Plate to 3/4 Thick Bar Stock Including Flat, Pipe, Angle Various Cut-Off s and Scrap Steel AS ,000 LB Hyster Model S50FT & S50XM LP Gas Cushion Tire Lift Trucks (New to 2009) Large Quantity Lifting Equipment Including Spreader Bars, Chanins, Plate Grabbers and Related (2) 664 Ton Simplex Hydraulic Jacks w/ Electric Pump System Large Quantity Steel Floor Plate and Steel Scrap Large Quantity Heavy Fabricating Related Shop Tools and Equipment 2002 Chevrolet Model Z-66 Avalanche 4-Door SUV

6 Plate Rolls To 1-7/8 LARGE CAPACITY PLATE AND STRUCTURAL FABRICATING FACILITY INCLUDING (7) MANIPULATORS, (6) TANK TURNING ROLLS AND (55) WELDERS TO 2008, PLATE ROLLS, ANGLE ROLL, BRAKE, SHEAR AND SUPPORT EQUIPMENT The Former Property of SUPERIOR FABRICATORS 155 Gordy Street - Baldwin, Louisiana Miles Southeast of Lafayette, Louisiana SALE DATE: Thursday, November 14th STARTING AT 9:00AM INSPECTION: Wednesday, November 13th from 10:00 AM to 4:00 PM Cincinnati Industrial Auctioneers Inc DUNLAP ST., CINCINNATI, OHIO PHONE (513) / FAX (513) WEBSITE: cia-auction.com FIRST CLASS MAIL! OF (5) Romar Manipulators (To 2008) Important Mail TO BE DIRECTED TO THE ATTENTION EXECUTIVE PERSONNEL 50+ Welders (To 2008) PRE-SORT FIRST CLASS U.S. POSTAGE PAID CINCINNATI, OHIO PERMIT NO THURSDAY, NOVEMBER 14TH The Former Property of SUPERIOR FABRICATORS 155 Gordy Street Baldwin, Louisiana Miles Southeast of Lafayette, Louisiana IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure. MAIL BIDS ACCEPTED WITH A 25% DEPOSIT DIRECTIONS From US 90 Approximately 50 Miles Southeast of Lafayette and 100 Miles Southwest of New Orleans Exit on St and Proceed North Towards Franklin Approximately 2 Miles to Route 182. Go West on Route 182 Approximately 2 Miles Toward Baldwin. After Crossing Bridge at Baldwin City Limits, Proceed 1/2 Mile and Make a Sharp Right. Turn on Sager Brown Road. Proceed East on Sager Brown Approximately 1/4 Mile to Gordy Street. Go Right onto Gordy Street and Proceed to Sale Site on Left. Watch For Auction Signs. AUCTIONEERS Jeffrey Luggen License No Ron Moore License No. 851 Bob Braman License No TERMS OF SALE All equipment described herein will be sold as is, where is to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of purchase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website. 15% ONSITE BUYER S PREMIUM 18% ONLINE BUYER S PREMIUM CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers appraisers since 1961 Cincinnati Industrial Auctioneers 2020 Dunlap St., Cincinnati, Ohio Phone Fax cia-auction.com info@cia-auction.com Plant & Machinery, Inc W. Sam Houston Pwky N., Suite A130 Houston, Texas Phone Fax pmi-auction.com pmi@pmi-auction.com