IEC Contactors & Starters. (IT.) Electro-Mechanical
|
|
|
- Sheena Wilkerson
- 5 years ago
- Views:
Transcription
1 March Contents Description Page Product Family Overview Product Description Standards and Certifications Publications Selection s and Product Description Features Product Selection Technical Data and Specifications Accessories Auxiliary Contacts Renewal Parts Wiring Diagrams Dimensions TEST Button IEC FVNR, C Frame Cat. No. E101C50L3A Relay with Cover Open FLA/Trip Class/ Phase Protection Dial RESET Button Product Description The Cutler-Hammer Intelligent Technologies (IT.) Electro-Mechanical from Eaton s electrical business consists of an Contact Block or and IT. Electro-Mechanical Solid-State Relay as a Full Voltage Nonreversing (FVNR) or Full Voltage (FVR) device. A-Frame (27 mm) to F-Frame (140 mm) s are factory or field assembled. Features IEC Full Voltage, E Frame Cat. No. E501E20R3A 115V AC AC, 1/4 350 hp/ kw,.25a 420A Amperes range, 24V DC coil control power safe, reliable, global standard Unique Pulse Width Modulated (PWM) coil controller minimizes energy and coil power consumption Microprocessor based control Phase loss and current unbalance protection, user selectable Standard user-selectable Trip Class 10 (factory default), 20 or 30 no individual part numbers no programming software Ambient compensated Motor temperature and power-up protection with thermal memory Easily accessible mounting feet for panel mounting For use on the load side of an Adjustable Frequency Drive, consult the factory. LED status indication trip, trip class, motor thermal state, reset, overload state Unique Alarm without Trip option for critical must run applications Lockable overload cover protects against unauthorized adjustment and reset functions No control wiring needed between contactor and overload relay eliminates seal in auxiliary contacts Minimal heat no full voltage coils -40 to 149 F (-40 to 65 C) operating temperature Wide 3.2:1 current adjustment range Exclusive internal 24-bit floating point math calculations with RMS calibrated current measurement High immunity to ESD, harmonics minimal Total Harmonic Distortion IP20 Finger Protection Motor running thermal utilization indication Manual, Automatic or Remote Reset Easy field assembly of control wiring plug and unplug lockable control connector DIN rail mounting, 6A 100A (A D Frames) Communication Interface with Network Adapter Product (SNAP) 2- or 3-wire control Solid-state alarm output indication Front and side mounted Auxiliary Contacts: 1NO, 1NC, 2NO, 2NC, 1NO/1NC, logic level (1NO/1NC) Type 2 Coordination Conformal coated PWM overload board for environmental toughness s Includes Power Wiring and bus bars Mounting plates for B-Frame (45 mm) to E-Frame (105 mm) Built-in electronic interlock for FVR units Unique overload board energizes both forward and reverse starters one control point for wiring Relay with Cover Closed (front view)
2 -224 March 2008 Product Selection When Ordering Select required by kw/hp rating, voltage, phase and overload adjustment range (amperes). s Table Full Voltage DC-Operated, Open Type s (A B Frames), with 3-Pole Solid-State Protection AC (le) A-Frame 27 mm B-Frame 45 mm Maximum Ue (V) on Page -2. IT. s are for IEC A-Frame, Full Voltage Maximum UL Horsepower (hp) 460V 500V 550V/ Class 10 (factory default), 20 and 30 Trip Times see Figure -144 on Page An E101 ( mm) consists of an E04N (Contact Block) or E111A () and an E05N ( Relay), factory assembled. An E101F (140 mm) consists of an E111 () and an E05N ( Relay), factory assembled. IEC B-Frame, Full Voltage /4 1/ / E101A06A3A E101A06B3A E101A06C3A E101A06D3A E101A06E3A / E101A09A3A E101A09B3A E101A09C3A E101A09D3A E101A09E3A / /2 7-1/2 E101A12A3A E101A12B3A E101A12C3A E101A12D3A E101A12E3A E101B18A3A E101B18B3A E101B18C3A E101B18D3A E101B18G3A E101B18J3A / E101B25A3A E101B25B3A E101B25C3A E101B25D3A E101B25G3A E101B25J3A / E101B32A3A E101B32B3A E101B32C3A E101B32D3A E101B32G3A E101B32J3A See Table -276 for 24V DC power supply Control inputs (P, F, 1) are rated 24V DC Accessories Pages Technical Data Pages Dimensions Pages Discount Symbol CD7
3 March IEC C-Frame FVNR s, continued Table Full Voltage DC-Operated, Open Type s (C D Frames), with 3-Pole Solid-State Protection AC (le) C-Frame 54 mm D-Frame 76 mm Maximum Ue (V) on Page -2. IT. s are for Maximum UL Horsepower (hp) 460V 500V 550V/ Class 10 (factory default), 20 and 30 Trip Times see Figure -144 on Page An E101 ( mm) consists of an E04N (Contact Block) or E111A () and an E05N ( Relay), factory assembled. An E101F (140 mm) consists of an E111 () and an E05N ( Relay), factory assembled E101C40A3A E101C40B3A E101C40C3A E101C40D3A E101C40F3A E101C40H3A E101C40L3A E101C50A3A E101C50B3A E101C50C3A E101C50D3A E101C50F3A E101C50H3A E101C50L3A E101D65F3A E101D65H3A E101D65K3A E101D65N3A E101D85F3A E101D85H3A E101D85K3A E101D85N3A E101D10F3A E101D10H3A E101D10K3A E101D10N3A See Table -276 for 24V DC power supply Control inputs (P, F, 1) are rated 24V DC Accessories Pages Technical Data Pages Dimensions Pages Discount Symbol CD7
4 -226 March 2008 IEC F- and E-Frame (105 mm and 140 mm) Full Voltage s s, continued Table Full Voltage DC-Operated, Open Type s (E F Frames) with 3-Pole Solid-State Protection AC (le) E-Frame 105 mm F-Frame 140 mm Maximum Ue (V) on Page -2. IT. s are for Maximum UL Horsepower (hp) 460V 500V 550V/ Class 10 (factory default), 20 and 30 Trip Times see Figure -144 on Page An E101 ( mm) consists of an E04N (Contact Block) or E111A () and an E05N ( Relay), factory assembled. An E101F (140 mm) consists of an E111 () and an E05N ( Relay), factory assembled E101E12K3A E101E12M3A E101E12P3A E101E12R3A E101E16K3A E101E16M3A E101E16P3A E101E16R3A E101E20K3A E101E20M3A E101E20P3A E101E20R3A E101F25P3A E101F25S3A E101F25T3A E101F31P3A E101F31S3A E101F31T3A E101F42P3A E101F42S3A E101F42T3A See Table -276 for 24V DC power supply Control inputs (P, F, 1) are rated 24V DC Accessories Pages Technical Data Pages Dimensions Pages Discount Symbol CD7
5 March s Table Full Voltage DC-Operated, Open Type s (A B Frames) with 3-Pole Solid-State Protection AC (le) 24V DC coil voltage. IEC A-Frame A-Frame 27 mm B-Frame 45 mm Maximum Ue (V) on Page -2. IT. s are for Maximum UL Horsepower (hp) 440V/ 460V 500V 550V/ An E501 ( mm) consists of two E04N (Contact Blocks), an E06N ( Relay), Fanning Strips, Mechanical Interlock and Mounting Plate. An E501F (140 mm) consists of two E111F (s), an E06NF ( Relay), Mechanical Interlock, Crossover Bus Bars and Wiring Harness. An E501A (27 mm) consists of an E511A () and E06NA ( Relay) /4 1/ / E501A06A3A E501A06B3A E501A06C3A E501A06D3A E501A06E3A / E501A09A3A E501A09B3A E501A09C3A E501A09D3A E501A09E3A / /2 7-1/2 E501A12A3A E501A12B3A E501A12C3A E501A12D3A E501A12E3A E501B18A3A E501B18B3A E501B18C3A E501B18D3A E501B18G3A E501B18J3A / E501B25A3A E501B25B3A E501B25C3A E501B25D3A E501B25G3A E501B25J3A / E501B32A3A E501B32B3A E501B32C3A E501B32D3A E501B32G3A E501B32J3A See Table -276 for 24V DC power supply Control inputs (P, F, R, 1) are rated 24V DC Accessories Pages Technical Data Pages Dimensions Pages Discount Symbol CD7
6 -228 March 2008 IEC C-Frame s, continued Table Full Voltage DC-Operated, Open Type s (C D Frames) with 3-Pole Solid-State Protection AC (le) 24V DC coil voltage. C-Frame 54 mm D-Frame 76 mm Maximum Ue (V) on Page -2. IT. s are for Maximum UL Horsepower (hp) 440V/ 460V 500V 550V/ An E501 ( mm) consists of two E04N (Contact Blocks), an E06N ( Relay), Fanning Strips, Mechanical Interlock and Mounting Plate. An E501F (140 mm) consists of two E111F (s), an E06NF ( Relay), Mechanical Interlock, Crossover Bus Bars and Wiring Harness. An E501A (27 mm) consists of an E511A () and E06NA ( Relay) E501C40A3A E501C40B3A E501C40C3A E501C40D3A E501C40F3A E501C40H3A E501C40L3A E501C50A3A E501C50B3A E501C50C3A E501C50D3A E501C50F3A E501C50H3A E501C50L3A E501D65F3A E501D65H3A E501D65K3A E501D65N3A E501D85F3A E501D85H3A E501D85K3A E501D85N3A E501D10F3A E501D10H3A E501D10K3A E501D10N3A See Table -276 for 24V DC power supply Control inputs (P, F, R, 1) are rated 24V DC Accessories Pages Technical Data Pages Dimensions Pages Discount Symbol CD7
7 March IEC E-Frame FVR Cat. No. E501E20P3A IEC F-Frame s, continued Table Full Voltage DC-Operated, Open Type s (E F Frames) with 3-Pole Solid-State Protection AC (le) 24V DC coil voltage. E-Frame 105 mm F-Frame 140 mm Maximum Ue (V) If required, accessories are available on Page -2. IT. s are for Maximum UL Horsepower (hp) 440V/ 460V 500V 550V/ An E501 ( mm) consists of two E04N (Contact Blocks), an E06N ( Relay), Fanning Strips, Mechanical Interlock and Mounting Plate. An E501F (140 mm) consists of two E111F (s), an E06NF ( Relay), Mechanical Interlock, Crossover Bus Bars and Wiring Harness. An E501A (27 mm) consists of an E511A () and E06NA ( Relay) E501E12K3A E501E12M3A E501E12P3A E501E12R3A E501E16K3A E501E16M3A E501E16P3A E501E16R3A E501E20K3A E501E20M3A E501E20P3A E501E20R3A E501F25P3A E501F25S3A E501F25T3A E501F31P3A E501F31S3A E501F31T3A E501F42P3A E501F42S3A E501F42T3A See Table -276 for 24V DC power supply Control inputs (P, F, R 1) are rated 24V DC Accessories Pages Technical Data Pages Dimensions Pages Discount Symbol CD7
8 -230 Technical Data and Specifications March 2008 Table Specifications Description Auxiliaries add approximately 1.0" (25 mm) to depth for single, 1.2" (30 mm) for dual. contactors and starters only. 99% by application. A-Frame 27 mm Overall Dimensions in Inches (mm) w x h x d 1.1 x 3.0 x 2.4 (27 x 75 x 60) 2.4 x 2.9 x 2.4 (60 x 73 x 60) 1.2 x 4.0 x 3.1 (31 x 102 x 79) 2.5 x 4.0 x 3.1 (64 x 102 x 79) Mounting Hole Spacing in Inches (mm) w x h Mounting Positions.76 x 2.64 (19.2 x 67) 1.31 x 2.52 (33.2 x 64).76 x 3.70 (19.3 x 94.0) 1.31 x 3.52 (33.2 x 89.4) B-Frame 45 mm 1.8 x 4.4 x 2.4 (45 x 111 x 60) 3.8 x 5.9 x 2.7 (96 x 149 x 69) 1.8 x 5.0 x 2.5 (45 x 127 x 63) 3.8 x 5.9 x 2.7 (96 x 149 x 69) 1.33 x 4.0 (33.8 x 101) 3.15 x 5.35 (80 x 136) 1.33 x 4.62 (33.8 x 117.3) 3.15 x 5.35 (80 x 136) C-Frame 54 mm 2.1 x 4.4 x 2.4 (54 x 113 x 60) 4.5 x 5.9 x 2.6 (114 x 149 x 67) 2.1 x 5.4 x 2.5 (54 x 138 x 63) 4.5 x 5.9 x 2.6 (114 x 149 x 67) 1.46 x 4.10 (37 x 104) 3.15 x 5.35 (80 x 136) 1.46 x 5.04 (37 x 128) 3.15 x 5.35 (80 x 136) D-Frame 76 mm 3.0 x 5.9 x 3.1 (76 x 150 x 79) 6.2 x 7.4 x 3.3 (158 x 188 x 84) 3.0 x 5.9 x 3.1 (76 x 150 x 79) 6.2 x 7.4 x 3.3 (158 x 188 x 84).94 x 2.87 (24 x 73) 5.51 x 6.89 (140 x 175).94 x 2.87 (24 x 73) 5.51 x 6.89 (140 x 175) E-Frame 105 mm 4.1 x 8.0 x 3.5 (105 x 203 x 90) 8.5 x 9.5 x 3.8 (216 x 242 x 97) 4.1 x 8.0 x 3.5 (105 x 203 x 90) 8.5 x 9.5 x 3.8 (216 x 242 x 97) 1.33 x 4.13 (33.8 x 105) 7.87 x 9.06 (200 x 230) 1.33 x 4.13 (33.8 x 105) 7.87 x 9.06 (200 x 230) Panel-Vertical Yes Yes Yes Yes Yes Yes Panel-Horizontal Yes Yes Yes Yes Yes Yes DIN Rail Mountable Yes Yes Yes Yes No No Weights in Lb. (kg).3 (.14).6 (.27).4 (.18).9 (.40).7 (.31) 1.9 (.86).9 (.40) 2.0 (.90).9 (.42) 2.6 (1.17) 1.2 (.53) 2.6 (1.20) 2.8 (1.27) 6.9 (3.13) 2.9 (1.32) 7.1 (3.20) 6.7 (3.05) 16.9 (7.67) 7.1 (3.20) 16.8 (7.60) F-Frame 140 mm 5.6 x 14.0 x 7.0 (142 x 356 x 178) 11.7 x 17.2 x 7.0 (297 x 437 x 178) 5.7 x 19.4 x 7.0 (145 x 493 x 178) 11.8 x 21.0 x 7.0 (300 x 533 x 178) 1.75 x 13.0 (44.5 x 330) 7.82 x 13.0 (199 x 330) 1.75 x 18.3 (44.5 x 465) 7.82 x 18.3 (198.5 x 465) Mechanical Operating Rate Maximum 6/sec 3/sec 3/sec 2/sec 2/sec 1/sec Mechanical Life 23,000,000 10,000,000 10,000,000 8,000,000 8,000,000 5,000,000 Humidity Insulation Voltage (Ui) 690V 690V 690V 690V 690V 690V Impulse Withstand Voltage (Uimp) 6 kv 6 kv 6 kv 6 kv 6 kv 6 kv Current Ue AC Thermal Current (Ith) AC-2, AC Operating Current (Ie) AC-4 Operating Current (Ie) Current Ue AC-1 Thermal Current (Ith) AC-2, AC-3 Operating Current (Ie) AC-4 Operating Current (Ie) (9.1) 48 (21.8) 27 (12.3) 55 (25.0)
IEC Contactors & Starters IT. Electro-Mechanical B-178. Publications. Product Description. Standards and Certifications. ISO 9002 Certification
-78 Product Family Overview July 08 IEC, A Frame, Full Voltage Non-reversing and Reversing Starters Product Description Eaton s Cutler-Hammer Intelligent Technologies (IT.) Electro-Mechanical line of Contactors
IT. IEC Contactors, Starters, Overload Relays, and Accessories Product Focus
IT. IEC Contactors, Starters, Overload Relays, and Accessories Product Focus Control and Expanded Functionality for Intelligent Technologies (IT.) See How IT. All Works Together A Complete Family of IEC
Application Description
-14 Type, Intelligent Technologies (IT.) Soft Starters February 2007 Contents Description Page Type, Intelligent Technologies (IT.) Soft Starters Product Description....... -14 Application Description....
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
CTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
Product Selection 3-Pole Contactors
- Contactors and January 0 Vol., Ref. No. [06] Product Selection -Pole Contactors When Ordering Specify Select required contactor by Catalog Number and replace the magnet coil alpha designation in the
Industrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
Manual Motor Starters. Meta-MEC
Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters
ABB s new control and protection devices
ABB s new control and protection devices One product family ABB presents a new generation of first-class specialized components: manual motor starters, contactors, overload relays and softstarters for
AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
Product Description. Application Description
-2 Solid-State Controllers Type TL, Torque Limiter August 6 Contents Description Page Torque Limiters............ -2 Soft Start Controllers........ -4 Soft Start Controllers with Auxiliary Contact.....
AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
Motor Starters. Reduced Voltage. Reduced Voltage Motor Starters 1. Contents
1 January 00 Reduced Voltage Motor Starters Contents Description Page Open Type S7, Intelligent Technologies (IT.) Soft Starters Product Description............................................. Application
Essential equipment for all your requirements
NEW CTX CONTACTORS Essential equipment for all your requirements 9 A TO 310 A THREE-POLE INDUSTRIAL CONTACTORS CTX three-pole industrial contactors, a sense of family The new range of CTX contactors provides
MS General Information Extended Product Type: MS
MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual
Motor Starters. Reduced Voltage. Reduced Voltage Motor Starters Contents
June 5 Vol. 2, Ref. No. [067] -1 Reduced Voltage Motor Starters Contents Description Page Solid-State Controllers Type S701, Soft Start.......................................... -2 Type TL, Torque Limiter........................................
Selection Guide Motor Control Device Solutions
Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements
Controls. THERMAL OVERLOAD RELAYS RW..D (up to 40A)
Controls THERMAL OVERLOAD RELAYS RW..D (up to 0A) 0800 7 9 Thermal Overload Relays RW..D (up to 0A) THERMAL OVERLOAD RELAYS RW..D (up to 0A) Summary Introduction RW7-D Thermal Overload Relay from 0.8 up
Ktec Contactors and thermal overloads
Contactors and thermal overloads Techna KTEC series contactors provide a complete solution for your ac contactor requirements.the range carries TUV, UL & CSA certification, for use in Europe, North America
Short form catalogue. Motor protection & control
Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59
3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00,
Low-Voltage Controls and Distribution > Industrial Controls > Protection Equipment > Circuit Breakers/Motor Starter Protectors > Motor Starter Protectors SIRIUS RV up to 00 A RV0-0DA5 CIRCUIT-BREAKER,
AF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101415D0201 25/03/11 AF30-30-11-.. / AF30Z-30-11-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF30(Z) contactors are used for controlling power circuits
Meta Solution. Contactors and Overload relays
Meta Solution Contactors and Overload relays Meta Solution New generation of Contactors from LSIS Contactors and Overload Relays Metasol Contactors Designed to show superior technology: The Metasol series
Submittal Data Information
Effective: NOVEMBER 3, 2014 JOB CONTRACTOR ITEM NO. Submittal Data Information TDX - Taco Duplex Starter ENGINEER REP. 301-2693 Supersedes: NEW TDX - TACO DUPLEX STARTER 1Ø, 230V, 1/10-15HP 3Ø, 200-460V,
SD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
AF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
B115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
Thermal Overload Relays
Data Sheet Thermal Overload Relays Ex9RD Series Ex9RD93 Ex9RD25 www.noarkusa.com NOARK Ex9RD Series Thermal overload relays are economic electromechanical protection devices for the main circuit. They
AF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
XT IEC Power Control Manual Motor Protectors
May 07 Product Selection Table 7. Rotary with Screw Terminals Global Ratings and North American Ratings Type and Type 2 Coordination Motor Protective Device with Thermal and Magnetic Trip Rated Uninterrupted
TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
RSB1A160B7 interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A
Characteristics interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A Stock Code: Stock - Normally stocked in distribution facility Price*: 4.20 USD Complementary Shape of pin Jul 8, 2015 Main Commercial
GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
Manual Motor Starters
Leader in Electrics & Automation Meta-MEC Manual Motor Starters Electric Equipment LG Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 45 mm 70 mm 63AF 100AF 3 LG Meta-MEC
Electronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays are the alternative to the thermal overload relays. An electronic overload relay offers reliable and fast protection
Protection Equipment
Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection
3. Coils shall be of molded construction
.7-4 Motor Starters & Contactors Low Voltage Enclosures General Non-Combination Starters January 00 Sheet 8 0 7 8 9 4 Non-Combination Starters Maximum hp, Volts Typical Non-Combination Starter Application
About us. Switchgear Factory, Mumbai
About us Larsen & Toubro is a technologydriven USD 8.5 billion company that infuses engineering with imagination. The Company offers a wide range of advanced solutions in the field of Engineering, Construction,
Motor Protection Circuit Breakers
Motor Protection Circuit Breakers About us Larsen & Toubro is a technologydriven USD 9.8 billion company that infuses engineering with imagination. The Company offers a wide range of advanced solutions
Features. Applications. Commercial Industrial Mining. New CBI range additional to existing range DILM7 SN10 DILM9 SN11 DILM12
GLOBAL RANGE Global Range Thermal Contactors Contactors Contactor Product Comparison Features Competitively priced Comprehensive range (AC & DC) Fitted with Auxiliary/s as standard Type coordination Applications
Data sheet. CI-TI TM Contactors and Motor Starters Circuit Breakers CTI B1427
Data sheet CI-TI TM Contactors and Motor Starters Circuit Breakers November 2002 DKACT.PD.C00.L2.02 520B1427 Introduction Circuit breakers/manual motor starters cover the power ranges 0.09-12.5 kw This
SECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters
AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet SBC042D020 06/04/ -22-00-.. / Z-22-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC.
Overload Relays. Thermal (Bimetallic) style up to 800A. Overload relay structure
Overload Relays Thermal (Bimetallic) style up to 800A CGT type overload relays are designed for the easy mounting directly to contactors or separately by using additional bases or brackets. Relays frame
Overload Relays. Thermal (Bimetallic) style up to 800A. Overload relay structure
Overload Relays Thermal (Bimetallic) style up to 800A CGT type overload relays are designed for the easy mounting directly to contactors or separately by using additional bases or brackets. Relays frame
KT4 Manual Motor Starter
KT4 Manual Motor Starter Ideal for use as a manual starter The KT4 is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one
Meta Solution. Contactors and Overload relays
Meta Solution Contactors and Overload relays New generation of Contactors from LS Industrial Systems Contactors and Overload Relays Metasol Contactors Designed to show superior technology: The Metasol
Electronic overload relays EF205 and EF370
Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
GLOBAL RANGE. Global Range Motor Control. Contactors. Features. Applications. Overload Relays. Features. Applications. Manual Motor Starter Features
GLOBAL RANGE Contactors Overload Relays Features Competitively priced Comprehensive range (AC & DC) Fitted with Auxiliary/s as standard Type coordination Applications Commercial Industrial Mining Features
Thermal overload relay TF65 and TF96
Data sheet Thermal overload relay TF65 and TF96 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against overload and
Product Line Overview. The Most Logically Designed Contact Assembly
Circuit Breakers & Supplementary Protectors 15 00 Amperes for UL, CSA & IEC Applications Product Line Overview -3 General Information Cutler-Hammer Series G Molded Case Circuit Breakers provide increased
CI-TI Contactors and motor starters Types CI 61 - CI 98
Data sheet CI-TI Contactors and motor starters s CI 6 - CI 98 Contactors CI 6, CI 7, CI 86 and CI 98 switch powers of up to 0 kw, 7 kw, 45 kw and 55 kw respectively under 80 V - loads. Accessories include
Star Series Motor protection & control
Contact us ABB Inc. Low Voltage Control Products 16250 W. Glendale Drive New Berlin, WI 53151 Phone: 888-385-1221 Fax: 800-726-41 USA Technical support & Customer Service: 888-385-1221, Option 4 7:30AM
3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
Contact us. ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F Chassieu cedex / France
Contact us ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F-69687 Chassieu cedex / France You can find the address of your local sales organisation on
A200 NEMA Contactors and Starters A200
Starters Non-reversing and Reversing 11 Not to be used for construction purposes unless approved. Table 11. Open Reversing Starters Dimensions NEM of Poles Fig. Mounting Dimensions in Inches (mm) Screws
Soft Starter. Types RSBD. Product Description. Type Selection. Ordering Code RSB D E V 61 HP
Soft Starter Three-Phase Scroll Compressor Soft Starter Types RSBD Soft starting of 3-phase scroll compressors up to 95Amp Patented auto-adaptive algorithm for optimum inrush current reduction (No user
AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440
Features and Benefits
-52 August 2006 Contents Page Type MV801, Intelligent Technologies (IT.) Medium Voltage Soft Starters Operation.............. -53 Selection.............. -55 Product Selection........ -56 Options................
2.1. NEMA Contactors and Starters
3A Overload C306DN3B Contents Contactors Non-Reversing and Reversing...... Starters Three-Phase Non-Reversing and Reversing, Full Voltage.................... Starters Single-Phase Non-Reversing, Full Voltage,
Vistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
AF series contactors (9 2650)
R E32527 R E39322 contactors General purpose and motor applications AF series contactors (9 2650) 3- & 4-pole contactors General purpose up to 2700 A Motor applications up to 50 hp, 900 kw NEMA Sizes 00
EW series Industrial contactors
2012_EW_Contactors_bro_EN.qxd:Mise en page 1 31/08/12 10:24 Page 2 EW series Industrial contactors Hager offers a complete range of contactors for commercial market such as buildings, infrastructures,
Features 1 Phase HP/Volts 1/6 HP AT 230 V 3 Phase HP/Volts 1/2 HP AT 200/230 V, 1-1/2 HP AT 460/575 V
804 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A07NN A Man Motor Protector Eaton Corp Catalog Number A07NN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;
NF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101428D0201 28/03/11 -.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
Protection Equipment. 5/2 Introduction
Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1
FMotor Circuit Controllers
Technical Information Motor Circuit Controller IEC Performance Data Catalog Number KTA7-25S...32S 0.16A 0.25A 0.4A 0.63A 1A 1.6A 2.5A 4A 6.3A 10A 16A 20A 25A 29A 32A Rated Operational Current, I e [A]
Ideal for use as a manual starter
Manual Motor Starter Ideal for use as a manual starter The is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one compact
Bimetal Overload Relays 3UA and 3UC
32 Bimetal Overload Relays 3UA and 3UC The 3UA / 3UC thermal overload relays are suitable for customers from all industries, who want guaranteed optimum inverse time delayed protection of their electrical
AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC
AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory
MANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
B Mini Contactor V Hz
ABB B7-30-10-80 Mini Contactor 220-240V 40-450Hz General Information Extended Product Type Product ID B7-30-10-80 GJL1311001R8100 EAN 4013614150197 Catalog Description Long Description B7-30-10-80 Mini
Thermal overload relay TF140DU and TF140DU-V1000
Data sheet Thermal overload relay TF140DU and TF140DU-V1000 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against
Cat N 3. OVERALL DIMENSIONS
Cat N Motor driven remote control module 87045 LIMOGES Cedex - FRANCE Telephone : + 33 5 55 06 87 87 Fax: + 33 5 55 06 88 88 Cat N : : 4 062 91 CONTENTS PAGE 1. Description - Use...1 2. Product range...1
TO COME. CEP7 Solid-State Overload Relay for Motor Control Centers and Enclosed Control
CEP7 Solid-State Overload Relay for Motor Control Centers and Technical Data Description Page Product Description.............................................. 2 Specifications...................................................
Meta Solution. Contactors and Overload relays
Meta Solution Contactors and Overload relays Meta Solution New generation of Contactors from LSIS Contactors and Overload Relays Metasol Contactors Designed to show superior technology: The Metasol series
LR9 F OVERLOAD RELAYS
Issued November 2009 DATA SHEET LR9 F OVERLOAD RELAYS Based on Schneider MKTED2050EN Catalogue General 6 Motor protection Operating conditions There are many possible causes of electric motor failure.
1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control
Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Overload Relays.................... C440/XT
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................
SECTION MOTORS, MOTOR STARTERS, VARIABLE FREQUENCY DRIVES AND ELECTRICAL WORK
PART 1 - GENERAL 1.1 GENERAL: SECTION 15150 MOTORS, MOTOR STARTERS, VARIABLE FREQUENCY DRIVES AND ELECTRICAL WORK A. The Mechanical Contractor shall furnish to the Electrical Contractor for installation,
Flexible. Intelligent. Trendsetting.
www.eaton.com www.moeller.net Flexible. Intelligent. Trendsetting. The easy way to connect. Product Information Motor-protective circuit-breaker PKE with electronic wide-range overload protection. Obliged
Solenoid Locking Safety Switches
Locking Safety Switches HSE HSE Full Size Locking Switches Key features: Plastic Housing: Lightweight 00N locking retention force Available with a red or green indicator Choose from circuit configurations
AF series contactors (9 2650)
R E32527 R E39322 contactors General purpose and motor applications AF series contactors (9 2650) 3- & 4-pole contactors General purpose up to 2700 A Motor applications up to 50 hp, 900 kw NEMA Sizes 00
15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
Data Sheet Manual Motor Starters Ex9SN Series
Data Sheet Manual Motor Starters Ex9SN Series www.noarkusa.com NOARK Ex9SN Series Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors
PRODUCT SPECIFICATION. Foot Switches. Series.
PRODUCT SPECIFICATION Foot 46 Series www.wernerelektrik.com Foot Switch Structures...1 Technical Data...2 Model Number Structure - Foot...3 Dimensions...4 Precautions... Foot WERNERS are Rigorous and tough.
LA Motor Protection. A South African Company to be Proud of
LA Motor Protection Relay Physical Address: 298 Soutter Street, Pretoria West Tel: 083 454 6949, +27 12 327 1729 Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41 www.newelec.co.za sales@newelec.co.za
A302DN.40/.63A Thermal Current Motor Starter
4 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A0DN.40/.6A Thermal Current Motor Starter Eaton Corp A0DN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;
B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data
B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1
Contactor Types CI 61-98
MKING MODERN LIVING POSSIBLE Data sheet Contactor s CI 6-98 Contactors CI 6, CI 73, CI 86 and CI 98 switch powers of up to 30 kw, 37 kw, 45 kw and 55 kw respectively under 3 380 V C-3 loads. ccessories
Thermal overload relays Type TA Class 10
Thermal overload relays Type TA Class Thermal Overload relays Description Available for starter construction with A Line contactors and separate panel mounting Designed for close couple mounting Separate
VB6, VB7 3-pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated
VB6, VB7 -pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated VB7-0-10 2CDC211006F0011 Description VB6, VB7 -pole compact design reversing contactors are space optimized control
A. Products shall be designed, manufactured, tested, and installed in compliance with the following standards:
SECTION 26 29 13 ENCLOSED MOTOR CONTROLLERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
I r A short-circuit protective device: Observe the maximum permissible fuse of the contactor with direct device mounting.
DATASHEET - ZB12-2,4 Delivery program Overload relay, 1.6-2.4 A, 1N/O+1N/C Part no. ZB12-2,4 Catalog No. 278437 Eaton Catalog No. XTOB2P4BC1 EL-Nummer 0004131832 (Norway) Product range Overload relay ZB
Industrial Protection Products Edition
Industrial Protection Products 2016 Edition COMPANY PROFILE Shanghai Liangxin Electrical Co., LTD. one of the leading low-voltage electrical component manufacture in the high-end market, was established
Size 3 and 4 Starter. Reversing Catalog Number as specified in table below. Catalog Number. Price U.S. $ W201K1CF W201K1CN W201K2CF W201K2CN
- Contactors Non-reversing and eversing ebruary 7 Contents Description Product amily Overview Page Product Description....... - Benefits................. - Contactors Non-reversing and eversing Product