profi-air Controlled home ventilation Technical data

Transcription

1 profi-air Controlled home ventilation Technical data DRAINAGE SYSTEMS EECTRICA SYSTEMS BUIDING TECNOOGY INDUSTRIA PRODUCTS

2 2 FRÄNKISCE profi-air Technical data

3 Table of contents profi-air refreshingly simple... profi-air pipes profi-air tunnel pipe 4 profi-air classic pipe 5 profi-air fittings, air outlets and fastening elements profi-air tunnel system 6 14 profi-air classic system profi-air system transition tunnel / classic profi-air manifolds profi-air manifold profi-air volume flow regulator profi-air accessories profi-air iso pipe profi-air Ovalkanal system profi-air external wall grill 38 profi-air roof hood / lead / steel tile 39 4 profi-air valve / ventilation grill / filter profi-air 25 / 4 touch ventilation s and accessories profi-air 25 / 4 touch ventilation profi-air electric pre-heater 5 profi-air installation set / silencer / connection set profi-air sensor/actuator box / operator button / sensor profi-air replacement filter / filter 56 profi-air siphon 57 FRÄNKISCE profi-air Technical data 3

4 Data sheet profi-air tunnel pipe Tunnel-shaped, crush-resistant, double-walled corrugated pipe with antistatic and antibacterial inside coating, to be installed in the insulation layer, for routing cables in suspended ceilings, installation walls, risers or frames. The smooth inner surface of the profi-air tunnel pipe allows for easy cleaning and enables high flow rates. Delivered coiled or in straight length with pipe plugs. Admissible operating temperature: -25 to 6 C Air flow rate acc. to DIN 1946/6: max. 45 m³/h Bending radius: n horizontal min. 3 cm n vertical min. 15 cm 3 / 2 m profi-air tunnel pipe Coil ø Coil height mm mm mm mm kg/packaging x 52 mm, in coils ,2 15 PP m x 52 mm, in lengths, stable PP m Pressure loss [Pa] Air volume [m 3 /h] Pressure loss in 1 m of pipe length 4 FRÄNKISCE profi-air Technical data

5 Data sheet profi-air classic pipe ighly flexible double-walled corrugated pipe with antistatic and antibacterial internal coating, to be installed in concrete ceilings, suspended ceilings, installation walls, risers or frames. The profi-air classic pipe with its smooth inner pipe surface allows easy cleaning. Admissible operating temperature: -25 to 6 C Ring stiffness > 8 kn/m 2 EN ISO 9969 Air flow rate acc. to DIN 1946/6: n N 63 = max. 23 m³/h n N 75 = max. 3 m³/h n N 9 = max. 45 m³/h Bending radius: min. 15 cm D I D O 2 / 5 m profi-air classic pipe D O D I Coil ø Coil height mm mm mm mm kg/coil N 63, in coils ,13 32 PE-D m N 75, in coils ,5 21 PE-D m N 75, in coils ,1 35 PE-D m N 9, in coils ,13 25 PE-D 9. 2 m Pressure loss [Pa] N 63 N 75 N 9 Air volume [m 3 /h] Pressure loss in 1 m of pipe length FRÄNKISCE profi-air Technical data 5

6 Data sheet profi-air tunnel 9 vertical bend 9 bend to carry out vertical and flowoptimised redirection of air flows. profi-air tunnel 9 vertical bend mm mm mm kg/pc. pc x 52 mm PE-D , 3,5 Pressure loss [Pa] * 3, 2,5 2, 1,5 1,, Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data

7 Data sheet profi-air tunnel 9 horizontal bend 9 bend to carry out horizontal and flow-optimised redirection of air flows. profi-air tunnel 9 horizontal bend mm mm mm kg/pc. pc x 52 mm PE-D , 3,5 Pressure loss [Pa] * 3, 2,5 2, 1,5 1,, Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data 7

8 Data sheet profi-air tunnel rotary adapter Rotary adapter for axial 18 rotation of the profi-air tunnel pipe. profi-air tunnel rotary adapter mm mm mm kg/pc. pc x 52 mm PE-D FRÄNKISCE profi-air Technical data

9 Data sheet profi-air tunnel outlet 9 9 outlet housing to connect to a valve. Can be universally used for supply air or extract air. Optional filters for extract air are available. Can be installed in walls, floors or ceilings. Can be mounted by using fastening lugs. D I D O profi-air tunnel outlet 9 for valve Ø125 mm D O D I mm mm mm mm mm kg/pc. pc x 52 mm PE-D , 4,5 4, Pressure loss [Pa] * 3,5 3, 2,5 2, 1,5 1,, Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data 9

10 Data sheet profi-air tunnel outlet 9 9 outlet housing to connect to a valve. Can be universally used for supply air or extract air. Optional filters for extract air are available. Can be installed in walls, floors or ceilings. Can be mounted by using fastening lugs. 1 2 D I D O profi-air tunnel outlet 9 for valve Ø125 mm D O D I / 1 / 2 mm mm mm mm mm kg/pc. pc x 132 x 52 mm / 52 / 321 PE-D Pressure loss [Pa] * Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data

11 Data sheet profi-air tunnel outlet straight Outlet straight housing to connect to a valve. Can be universally used for supply air or extract air. Optional filters for extract air are available. Can be installed in walls or ceilings. 1 2 D O D I profi-air tunnel outlet straight for valve Ø125 mm D O D I / 1 / 2 mm mm mm mm mm kg/pc. pc x 52 mm / 195 / PE-D , 2,5 Pressure loss [Pa] * 2, 1,5 1,, Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data 11

12 Data sheet profi-air tunnel outlet 9 9 outlet housing for cover grills. Can be universally used for supply air or extract air. Can be installed in walls or floors. Can be mounted by using fastening lugs profi-air tunnel outlet 9 for profi-air ventilation grill / 1 / 2 / 1 / 2 mm mm mm kg/pc. pc x 52 mm 269 / 85 / / 8 / 174 PE-D , 7, Pressure loss [Pa] * 6, 5, 4, 3, 2, 1, Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data

13 Data sheet profi-air tunnel plug End plug for hygienic sealing of profi-air tunnel pipes. profi-air tunnel plug mm mm mm kg/pc. pc x 52 mm PP.2 5 FRÄNKISCE profi-air Technical data 13

14 Data sheet profi-air fixing clamp Metal fixing clamp for clamping of profi-air tunnel connections: n pipe / pipe n pipe / fitting n fitting / fitting Integrated retaining brackets with a 6. mm drill hole each enable fixing. profi-air fixing clamp mm mm mm kg/pc. pc x 52 mm steel FRÄNKISCE profi-air Technical data

15 Data sheet profi-air classic adapter straight Straight fitting to reduce profi-air classic from N 9 to 2x N 63. D D1 Part No. Type D1 Dimensions Material eight PE-D kg/pc..114 pc. 1 profi-air classic adapter straight x N 63 / N 9 D / D1 mm 9 / 63 mm 151 mm Druckverlust [Pa] Pressure loss [Pa] Air volume [m[m /h]/h] uftmenge FRÄNKISCE profi-air Technical data 15

16 Data sheet profi-air classic elbow 9 9 elbow for horizontal or vertical redirection of air flows to connect a profi-air classic pipe system without tension. DI DI Part No. Type Dimensions Material eight PE-D PE-D kg/pc pc. 1 1 profi-air classic elbow DI mm 75 9 N 75 N 9 mm N 75 N 9 Pressure[Pa] loss [Pa] Druckverlust Air volume [m [m33/h] /h] uftmenge FRÄNKISCE profi-air Technical data

17 Data sheet profi-air classic manifold coupling Manifold coupling for direct connection of profi-air classic pipes with profi-air classic plus manifold. On one side, the coupling has an intake for the profi-air classic pipe, on the other side, it has a bayonet joint to connect the manifold. The integrated push-in stop prevents the pipe from being inserted too far. The pipe is held in the coupling by means of integrated retaining nubs. D D 1 profi-air classic manifold coupling D D 1 mm mm mm kg/pc. pc N PP N PP N PP.52 1 FRÄNKISCE profi-air Technical data 17

18 Data sheet profi-air classic outlet 9 9 outlet housing to connect to a valve. Can be universally used for supply air or extract air. Can be installed in walls, floors or ceilings. Can be mounted by using fastening lugs. D I D O profi-air classic outlet 9 valve Ø125 mm D O D I mm mm mm mm mm kg/pc. pc x N PE-D Pressure loss [Pa] Air volume [m 3 /h] 18 FRÄNKISCE profi-air Technical data

19 Data sheet profi-air classic outlet 9 9 outlet housing to connect to a valve. Can be universally used for supply air or extract air. Can be installed in walls, floors or ceilings. Can be mounted by using fastening lugs. D I D O profi-air classic outlet 9 valve Ø125 mm D O D I mm mm mm mm mm kg/pc. pc x N PE-D x N PE-D / PP N 75 N 9 15 Pressure loss [Pa] Air volume [m 3 /h] FRÄNKISCE profi-air Technical data 19

20 Data sheet profi-air classic coupling Polyethylene (PE) coupling to connect profi-air classic pipes. The integrated push-in stop prevents the pipe from being inserted too far. Retaining nubs provide for a secure connection between the pipe and the coupling. D I profi-air classic coupling D I mm mm kg/pc. pc N PE N PE N PE FRÄNKISCE profi-air Technical data

21 Data sheet profi-air classic accessories O-ring to seal profi-air classic connections. Due to the material properties no additional lubricant is required. D I D O profi-air classic O-ring D O D I mm mm kg/pc. pc N EPDM N EPDM N EPDM.4 1 Plastic plug to seal profi-air classic pipes. D I D O profi-air classic plug D O D I kg/pc. pc N plastic N plastic N plastic.15 5 FRÄNKISCE profi-air Technical data 21

22 Data sheet profi-air adapter straight Straight fitting to connect profi-air tunnel pipes and fittings to profi-air classic fittings / D I D I D O D O profi-air adapter straight profi-air classic to profi-air tunnel D O D I mm mm mm mm mm kg/pc. pc x 52 mm / N PE-D x 52 mm / N PE-D x 52 mm / N PE-D N 75 N 9 7 Pressure loss [Pa] * Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data

23 Data sheet profi-air adapter 9 Straight 9 fitting to connect profi-air tunnel pipes and fittings to profi-air classic fittings. D I 1 1 profi-air adapter 9 profi-air classic to profi-air tunnel D I / 1 mm mm mm mm kg/pc. pc x 52 mm / N / 147 PE-D x 52 mm / N / 163 PE-D N 75 N 9 8 Pressure loss [Pa] * Air volume [m 3 /h] *Including profi-air sealing and connection element, part no FRÄNKISCE profi-air Technical data 23

24 Data sheet profi-air classic manifold plus 1 D O Distribution box for supply air or extract air with interior sound insulation lining, including mounting angles. The manifold can be used as a straight or 9 manifold. Two lateral inspection openings are meant for inspection and cleaning. Constant volume flow regulators can be optionally used in manifold outlets. Can be used in connection with profi-air classic pipe N 63 / N 75 / N 9. Permissible flow rates: n = max. 225 m³/h n = max. 36 m³/h n = max. 45 m³/h profi-air classic manifold plus D O / 1 mm mm mm mm kg/pc. pc manifold, 5-fold DN / steel manifold, 1-fold DN / steel manifold, 15-fold DN / steel Pressure loss [Pa] * Straight distribution Air volume [m 3 /h] Pressure loss [Pa] * distribution Air volume [m 3 /h] *Including profi-air classic connection coupling, part no , part no and part no FRÄNKISCE profi-air Technical data

25 Data sheet profi-air tunnel / Ovalkanal manifold flat Distribution box for supply air or extract air, including four fastening lugs and an inspection opening for inspection and cleaning. Permissible flow rates when connected to: n = max. 165 m³/h n = max. 225 m³/h n = max. 33 m³/h (2 manifolds in parallel) profi-air tunnel / Ovalkanal manifold flat mm mm mm kg/pc. pc Flat manifold PS Pressure loss [Pa] * Air volume [m 3 /h] *Including profi-air tunnel sealing and connection element, part no FRÄNKISCE profi-air Technical data 25

26 Data sheet profi-air classic constant airflow regulator Self-regulating constant flow regulator for the profi-air classic manifold plus, with a wear-free control element in a plastic housing to be directly installed in the profi-air classic manifold connection coupling. Automatic, maintenance-free air flow regulation independent from the position, no auxiliary energy needed. Compatible with: / / Setting range: n = 15 m³/h static n 7832 = 2-5 m³/h variable D O Tolerance value: +/- 5 m³/h profi-air classic constant airflow regulator D O mm mm kg/pc. pc m³/h 8 54 PP/silicone m³/h 8 75 PP/silicone Air volume [m 3 /h] Druckverlust Pressure loss [Pa] 5 m³/h 45 m³/h 4 m³/h 35 m³/h 3 m³/h 25 m³/h 2 m³/h 15 m³/h 26 FRÄNKISCE profi-air Technical data

27 Data sheet profi-air classic booster Self-intensifying element for the profi-air classic manifold plus, when intensive ventilation is needed. The booster enables higher air volume flow rates in predefined rooms. It is always to be used for supply/extract air. Recommended in: living room and kitchen Compatible with: , , D O profi-air classic booster D O mm mm kg/pc. pc Ø 8 mm 8 54 PP Pressure loss [Pa] Air volume [m 3 /h] FRÄNKISCE profi-air Technical data 27

28 Data sheet profi-air tunnel airflow restrictor Restrictor element to compensate for the pressure loss in the air distribution system. The regulating element can be installed in the profi-air tunnel sealing and connection element. profi-air tunnel airflow restrictor mm mm mm kg/pc. pc x 52 mm PS.14 1 Pressure loss [Pa] a 3a 2a 1a 1 opening 1 or 1a 1 opening 4 or 4a 2 openings 1 and 1a 2 openings 2 and 2a 2 openings 3 and 3a 4 openings 1, 2 and 1a, 2a 4 openings 3, 4 and 3a, 4a 6 openings 1, 2, 3 and 1a, 2a, 3a 6 openings 2, 3, 4 and 2a, 3a, 4a all open Air volume [m 3 /h] 28 FRÄNKISCE profi-air Technical data

29 Data sheet profi-air iso pipe Completely insulated and vapour-tight pipe made of EPP, including an iso pipe coupling. profi-air iso pipes are suited for external, exhaust, supply and extract air. Admissible operating temperature: -25 to 8 C eat conduction:.42 /mk 1 D 1 D D 2 D D 2 D 1 profi-air iso pipe with coupling D / D 1 / D 2 / 1 mm mm kg/pc. pc DN 16 x 1 mm 16 / 19 / 22 1, / 8 EPP DN 18 x 1 mm 18 / 21 / 24 1, / 8 EPP.55 3 Pressure loss [Pa] DN 16 DN Air volume [m 3 /h] FRÄNKISCE profi-air Technical data 29

30 Data sheet profi-air iso pipe fittings Completely insulated and vapour-tight pipe bend made of EPP, including an iso pipe coupling. profi-air iso pipes are suited for external, exhaust, supply and extract air. Due to the notch placed in the middle, the 9 bend can be split into two 45 bends. 1 Admissible operating temperature: -25 to 8 C eat conduction:.42 /mk D 2 D 2 D 1 D 3 D D 1 profi-air 9 iso pipe bend with coupling D / D 1 / D 2 / 1 mm mm kg/pc. pc DN / 19 / 22 2 / 8 EPP DN / 21 / / 8 EPP DN 16 DN 18 6 Pressure loss [Pa] Air volume [m 3 /h] 3 FRÄNKISCE profi-air Technical data

31 Data sheet profi-air iso pipe fittings Completely insulated and vapour-tight pipe coupling made of EPP to connect iso pipe fittings. profi-air iso pipes are suited for external, exhaust, supply and extract air. Admissible operating temperature: -25 to 8 C Thermal conductivity:.42 /(m*k) D 1 D D 2 profi-air iso pipe coupling D / D 1 / D 2 mm mm kg/pc. pc DN / 19 / 22 8 EPP DN / 21 / 24 8 EPP.15 6 Completely insulated and vapour-tight reduction made of EPP to connect iso pipe fittings. profi-air iso pipes are suited for external, exhaust, supply and extract air. Admissible operating temperature: -25 to 8 C eat conduction:.42 /mk D D 1 D 2 D 3 profi-air iso pipe reduction D / D 1 / D 2 / D 3 mm mm kg/pc. pc DN 18 / DN / 18 / 16 / 19 2 EPP.11 2 FRÄNKISCE profi-air Technical data 31

32 Data sheet profi-air Ovalkanal pipe The oval-shaped pipe made of ABS to connect a manifold and a ventilation. The Ovalkanal pipe is not hardwearing; to be installed on the wall/ ceiling. The Ovalkanal pipe is suitable for supply and extract air. profi-air Ovalkanal pipe mm mm mm kg/pc. pc x 68 mm ABS Pressure loss [Pa] * Air volume [m 3 /h] Pressure loss per 1 m of pipe length *Including profi-air Ovalkanal sealing and connection element, part no FRÄNKISCE profi-air Technical data

33 Data sheet profi-air Ovalkanal adapter DN 16 Ovalkanal adapter made of PE to connect an Ovalkanal and an iso pipe DN 16. The Ovalkanal adapter is suitable for supply and extract air. The integrated lip seal provides an airtight connection between the iso pipe and the adapter. D O B 1 profi-air Ovalkanal DN 16 adapter D O B 1 mm mm mm mm kg/pc. pc x 163 x 68 mm PE-D Pressure loss [Pa] * Air volume [m 3 /h] *Including profi-air Ovalkanal sealing and connection element, part no FRÄNKISCE profi-air Technical data 33

34 Data sheet profi-air Ovalkanal adapter DN 125 Ovalkanal adapter made of PE to connect an Ovalkanal and an iso pipe DN 125. The Ovalkanal adapter is suitable for supply and extract air. The integrated lip seal provides an airtight connection between the iso pipe and the adapter. D O profi-air Ovalkanal adaptor 9 D O mm mm mm kg/pc. pc x 68 mm to DN PE-D Pressure loss [Pa] Air volume [m 3 /h] *Including profi-air Ovalkanal sealing and connection element, part no FRÄNKISCE profi-air Technical data

35 Data sheet profi-air Ovalkanal elbow vertical 9 9 vertical elbow made of PE to redirect the Ovalkanal system. The Ovalkanal elbow is suitable for supply and extract air. profi-air Ovalkanal elbow vertical 9 mm mm kg/pc. pc x 68 mm PE-D Pressure loss [Pa] Air volume [m 3 /h] *Including profi-air Ovalkanal sealing and connection element, part no FRÄNKISCE profi-air Technical data 35

36 Data sheet profi-air Ovalkanal elbow horizontal 9 9 horizontal bend made of PE to redirect the Ovalkanal system. The Ovalkanal elbow is suitable for supply and extract air. Due to the notch placed in the middle, the 9 bend can be split into two 45 bends. profi-air Ovalkanal elbow horizontal 9 mm mm mm kg/pc. pc x 68 mm PE-D Pressure loss [Pa] Air volume [m 3 /h] *Including profi-air Ovalkanal sealing and connection element, part no FRÄNKISCE profi-air Technical data

37 Data sheet profi-air Ovalkanal sealing and connection element PP sealing and connection element to connect Ovalkanal pipes, Ovalkanal fittings, and profi-air tunnel Ovalkanal flat manifolds. Sealing lips on both sides provide airtight connection, the integrated retaining brackets with a 6.5 mm drill hole each enable fixing. 1 profi-air Ovalkanal sealing and connection element 1 mm mm mm mm kg/pc. pc x 68 mm PP.7 1 FRÄNKISCE profi-air Technical data 37

38 Data sheet profi-air external wall grill External wall grill made of stainless steel with pipe connection, including fastening material. Can be used for outside air or exhaust air. Easy fastening thanks to integrated drill holes in the grill frame. DN profi-air external wall grill DN mm mm mm mm kg/pc. pc DN 16 max. 3 m 3 /h stainless steel DN 18 max. 4 m 3 /h stainless steel Pressure loss [Pa] DN 16 DN 18 Air volume [m 3 /h] 38 FRÄNKISCE profi-air Technical data

39 Data sheet profi-air universal roof hood 1 D Completely insulated profi-air roof hood for outside and exhaust air ducting. Connection to the profi-air iso pipes DN 16 / DN 18. Depending on application, either an EPP coupling (DN 16) or a rubber coupling (DN 18) can be used as an adapter to the iso pipe. The integrated rain collar of the roof hood in combination with the profi-air roof lead-through/lead pan prevents rain or melt water ingress. D 1 EPP and rubber coupling are included in the scope of delivery. profi-air universal roof hood D / D 1 / 1 DN mm mm kg/pc. pc DN 16 / DN 18 max. 4 m 3 /h 298 / 2 1,4 / / 18 steel Pressure loss [Pa] Air volume [m 3 /h] FRÄNKISCE profi-air Technical data 39

40 Data sheet profi-air steel tile Steel tile for professional installation of the profi-air roof hood; suitable for flat roofs. D D 1 profi-air steel tile for flat roofs D / D 1 mm mm kg/pc. pc steel tile DN 16 / / aluminium.37 1 ead tile for professional installation of the profi-air roof hood; suitable for pitched roofs (lead pan, slope is not adjustable). D O α profi-air lead tile for pitched roofs D O α mm mm mm kg/pc. pc DN 16 / galvanised DN 16 / steel plate/ DN 16 / lead FRÄNKISCE profi-air Technical data

41 Data sheet profi-air extract air valve a: - + Extract air valve made of metal, including fitting frame to be installed in any profi-air tunnel and profi-air classic outlet DN 125. Suited for wall and ceiling installations. Progressive adjustment of the air flow is possible. T 1 D D 1 D profi-air extract air valve Including fitting frame D / D 1 / D 2 / 1 / 2 mm mm kg/pc. pc DN / 124 / / 18 / 5 white steel a [number of revolutions] Position s [mm] db(a) db(a) 3 db(a) DP t [Pa] q v [m 3 /h] FRÄNKISCE profi-air Technical data 41

42 Data sheet profi-air supply air valve a: + Supply air valve made of metal, including fitting frame to be installed in any profi-air tunnel and profi-air classic outlet DN 125. Suited for wall and ceiling installations. Progressive adjustment of the air flow is possible. D D 1 D profi-air supply air valve including fitting frame D / D 1 / D 2 / 1 / 2 mm mm kg/pc. pc DN / 124 / / 18 / 5 hite steel ohne a [number Sektorplatte of revolutions] a mit [number Sektorplatte of revolutions] ΔP t [Pa] db(a) 3 db(a) 35 db(a) ΔP t [Pa] db(a) 3 db(a) 35 db(a) 2 2 p1a p1a q v [m 3 /h] q v [m 3 /h] without sector plate with sector plate 42 FRÄNKISCE profi-air Technical data

43 Data sheet profi-air supply/extract air valve a: - + Supply or extract air valve made of plastic, including fitting frame to be installed in any profi-air tunnel and profi-air classic outlet DN 125. Suited for wall and ceiling installations. Progressive adjustment of the air flow is possible. D 1 profi-air supply/extract air valve Including fitting frame D / 1 mm mm kg/pc. pc DN / 18 PP, white.14 1 a [number of revolutions] a [number of revolutions] ΔP t [Pa] db(a) 35 db(a) 3 db(a) 25 db(a) p1a ΔP t [Pa] db(a) 35 db(a) 3 db(a) 25 db(a) p1a q v [m 3 /h] q v [m 3 /h] Supply air Extract air FRÄNKISCE profi-air Technical data 43

44 Data sheet profi-air (supply) extract air wall grill all grill made of steel plate for kitchen extract air to be installed in any profi-air tunnel and profi-air classic outlet DN 125. ashable expanded metal filter and fastening material included. Suited for wall installations. D I profi-air (supply) extract air wall grill for kitchen D I mm mm mm mm kg/pc. pc DN white steel.61 1 Pressure loss [Pa] without filter vortex 1% open with filter not contaminated vortex 1% open with filter not contaminated vortex 5% open Air volume [m 3 /h] 44 FRÄNKISCE profi-air Technical data

45 Data sheet profi-air supply / extract air grill ard-wearing ventilation grill for supply or extract air made of stainless steel, including fastening clamps, to be used in profi-air tunnel outlet 9 for covering grills. Suited for floor and wall installations. 1 1 profi-air supply/extract air grill / 1 / 1 mm mm kg/pc. pc x 13 mm 345 / / 8 stainless steel x 13 mm 345 / / 8 white steel Pressure loss [Pa] Air volume [m 3 /h] FRÄNKISCE profi-air Technical data 45

46 Data sheet profi-air filter Conical bag filter compatible with the following valves: n extract air poppet valve n supply/extract air valve Part No. Ø Type Dimensions Material eight polyester fibre kg/pc..6 pc. 5 profi-air filter Ø mm DN 125 for extract air valves mm 15 Rectangular filter compatible with the following ventilation grills: n supply/extract air ventila- tion grill, stainless steel n supply/extract air ventila- tion grill, white steel Part No. Type profi-air filter for ventilation grill G3 FRÄNKISCE profi-air Technical data Dimensions mm 75 mm 295 mm 1 Material eight filter fabric kg/pc..5 pc. 5

47 Data sheet profi-air touch ventilation Central ventilation in two output rates to be used in the field of controlled home ventilation. ousing made of galvanised steel plate (white) with an EPP core and a plastic front panel (light grey). Including cross-flow heat exchanger and summer bypass (1%). Commissioning/control by means of an integrated control (touch screen). The connection to the device can alternatively be established directly via the AN port on the front panel or the built-in AN router. The home network can be controlled by means of a freely selectable web browser (IP address; no specific software required). Further connection options via the CAN bus interface (necessary accessories: sensor/actuator box, 78383): n 4 external sensors (CO 2 and/or moisture) n electric preheater n electronic filter n operator button n service contact OFF Removal of by means of siphon (optional accessories). Connection AG 5/4''. F5 filter in the supply air, G4 filter (F7 filter available as an option) in the extract air. The device is delivered ready to plug-in. Part No. Type Dimensions eight profi-air touch ventilation mm mm mm kg/pc. pc touch touch from May 215 Technical data by analogy with the previous model / Additional connection options: n 2 external sensors (CO 2 and/ or moisture) n electric preheater n operator button n service contact OFF n CAN bus interface Part No. Type Dimensions eight profi-air touch ventilation mm mm mm kg/pc. pc touch touch FRÄNKISCE profi-air Technical data 47

48 Data sheet profi-air touch ventilation Unit type profi-air 25 touch profi-air 4 touch eight about 35 kg about 35 kg Dimensions (xdx) 575 x 645 x 74 mm 575 x 645 x 74 mm eat exchanger Type cross-flow plate heat exchanger, water-resistant, frost-proof Material Plastic Plastic Max. heat recovery efficiency 91% 9% Fans Fan operation 2 EC RadiCal fans with 7 backwards curving blades Power supply 23V / ~5 z 23V / ~5 z cross-flow plate heat exchanger, water-resistant, frost-proof 2 EC RadiCal fans with 7 backwards curving blades Performance Recommended application 7 to 25 m 3 /h 1 to 4 m 3 /h Max. air volume with 1 Pa 34 m³/h 48 m³/h 6 m³/h / 3 Pa 16 1 m³/h / 6 Pa 3 Electric power consumption, including control 17 m³/h / 1 Pa 57 2 m³/h / 1 Pa 7 25 m³/h / 1 Pa 94 4 m³/h / 1 Pa 211 Current 1.2 A 1.2 A Fuse protection (on site) 16. A delay fuse (cable 3 x 1.5 mm²) 16. A delay fuse (cable 3 x 1.5 mm²) Sound power level (EN ) Device noise 25 m³/h / 1 Pa 51.9 db(a) 4 m³/h / 1 Pa 6 db(a) Duct noise supply air 25 m³/h / 1 Pa 7.2 db(a) 4 m³/h / 1 Pa 77.7 db(a) Duct noise extract air 25 m³/h / 1 Pa 59.3 db(a) 4 m³/h / 1 Pa 67.5 db(a) Sound pressure level Device noise distance of 3 m 25 m³/h / 1 Pa 37 db(a) 4 m³/h / 1 Pa 45 db(a) Filter supply air extract air supply air extract air Filter class F5, F7 optionally G4 F5, F7 optionally G4 Connection Air connection size Ø 16 mm Ø 18 mm Tests and approvals - DIBt (general building authority approval) - EN SAP App. Q - Klima aus Partner - DIBt (general building authority approval) - EN EN 38 - SAP App. Q - Klima aus Partner 48 FRÄNKISCE profi-air Technical data

49 Data sheet profi-air touch setting parameters Setting parameters profi-air 25 touch Pressure increase [Pa] volts 8.6 volts 7.3 volts 45.1 volts 5.4 volts 4.1 volts 2.8 volts 2.4 volts Flow rate [m 3 /h] Setting parameters profi-air 4 touch Pressure increase [Pa] volts 45.4 volts 4.8 volts 3.7 volts 6.3 volts Flow rate [m 3 /h] 7.6 volts 8.8 volts 1. volts FRÄNKISCE profi-air Technical data 49

50 Data sheet profi-air pre-heating element DN 16 Pre-heating element consisting of a EPP box with an integrated PTC heating element and a G3 prefilter. The pre-heater is a means of outside air pre-heating in the field of controlled home ventilation. It is to be installed in the fresh air pipe. The scope of delivery includes: n 2x connecting nipples DN 16 with lip seal n electric connection box with load relay n 3 m connection cable To connect the pre-heating element to the profi-air 25 / 4 touch, the sensor/actuator box (78383) is required. Technical data Electric connection: eating performance: Initial current: Safety components: Air volume flow rate: Air pipe connection: Filter: eight: VAC, 5/6 z; 3 m cable with strengthened core ends max. 2 k max. 1 A 2-fold overheating safety switch, integrated in the circuit of the PTC heating register max. 5 m³/h DN 16 using included double nipples G3 4.5 kg Part No. Type Dimensions eight profi-air pre-heating element mm mm mm kg/pc. pc DN Pressure loss [Pa] Volume flow rate [m 3 /h] 5 FRÄNKISCE profi-air Technical data

51 Data sheet profi-air mounting set Mounting set for wall installation of the profi-air 25 / 4 touch ventilation. The scope of delivery includes: n 2 metal rails (galvanised steel plate) n 1 rubber sealing lip n 2 spacers n 3 metal screws The rubber sealing lip is to be installed to provide noise separation of the device and the building. The threaded rubber buffers are used both as spacers and to provide noise separation. profi-air mounting set mm mm kg/pc. pc wall steel Mounting set for floor installation of the profi-air 25 / 4 touch ventilation. The scope of delivery includes: n 2 metal feet (galvanised steel plate) n 4 rubber buffers n 8 metal screws The rubber buffers are to be installed to provide both noise separation and horizontal/vertical adjustment of the device. 1 B 1 profi-air mounting set B / B 1 / 1 mm mm mm kg/pc. pc floor / / steel FRÄNKISCE profi-air Technical data 51

52 Data sheet profi-air silencer profi-air silencer consisting of two flexible aluminium pipes with a 25 mm silencer layer of resin-bounded mineral wool. Flexibly bendable (min. 3x outside DN). ip sealings on silencer connections. 1 D O profi-air silencer / 1 D O mm mm kg/pc. pc DN 16 1, / aluminium DN 18 1, / aluminium Insertion attenuation: DN DN outside Integral attenuation (db) in octave bands (z) TSD 1, mm long inside pack of z 25 z 5 z 1, z 2, z 4, z 8, z Pressure loss [Pa] DN 16 DN 18 Air volume [m 3 /h] 52 FRÄNKISCE profi-air Technical data

53 Data sheet profi-air touch connection set profi-air connection set consisting of four steel nipples with circumferential rubber sealing on both sides. N Part No. Type Dimensions Application Material eight profi-air touch connection set N Iso pipe Spiral duct mm mm kg/pc. pc touch 8 16 x x steel touch x steel profi-air connection set ISO consisting of two EPP adapter attachments to broaden the cuff distance. Required for installation of iso pipe DN 18 only. D O D I Part No. Type Dimensions Application Material eight profi-air touch connection set ISO D O D I B /B 1 / 1 / 2 Iso pipe Spiral duct mm mm mm mm mm kg/pc. pc touch / / 5 / 841 x - EPP.92 2 FRÄNKISCE profi-air Technical data 53

54 Data sheet profi-air sensor/actuator box / operator button Due to the profi-air sensor/actuator box, the following additional connection options are available: n 4 external sensors (CO 2 and/or moisture) n electric preheater n electronic filter n operator button n service contact OFF The scope of delivery includes: n sensor/actuator box n 5-pole CAN bus system cable (2 m) profi-air sensor/actuator box mm mm mm kg/pc. pc sensor/actuator box ABS mode operator button for profi-air 25/4 touch. The integrated 24V ED light shows the current power level of the ventilation with the help of a flash code. The scope of delivery includes: n concealed operator button n exposed frame, alpine white n ED light Technical data Switching voltage: AC 25 V Switching current: 1 AX Connection: spring terminals acc. to DIN VDE 632 (EN 6 669) Type of switch: 1 pole, make contact ousing: concealed Part No. Type Dimensions Colour profi-air operator button mm mm mm pc Operator button alpine white 1 54 FRÄNKISCE profi-air Technical data

55 Data sheet profi-air sensor Technical data Measurement principle: non-dispersive infrared technology CO 2 sensor for fully automatic control of profi-air 25/4 touch. n CO 2 concentration in the room air n alternating display of CO 2 concentration/room temperature display Ventilation modes of profi-air 25 / 4 touch are switched as follows: n mode 2 = < 1, ppm n mode 3 = 1, - 1,5 ppm n mode 4 = > 1,5 ppm Measuring range: to 5, ppm CO 2 Output: analogue output to 1 V Voltage supply: 23 VAC ±2%, 15 to 35 V DC CD display: CO 2 (ppm) / T ( C or F) Connection: screw terminals max. 1.5 mm 2 Operating conditions: to 9% r (non-condensing) / - 2 to 6 C ousing: exposed Part No. Type Dimensions Colour eight profi-air CO 2 sensor mm mm mm kg/pc. pc CO 2 sensor white.8 1 umidity sensor for fully automatic control of profi-air 25 / 4 touch. n humidity content in the room air n alternating display of humidity / room temperature display Ventilation modes of profi-air 25 / 4 touch are switched as follows: n mode 2 = < 6% relative humidity n mode 3 = 6-85% relative humidity n mode 4 = > 85% relative humidity Technical data Application area: to 95% relative humidity Output to 1% r: analogue output to 1 V Voltage supply: 15 to 4 VDC or 24 VAC ±2% Display: moisture (r) / T ( C or F) Connection: screw terminals max. 1.5 mm 2 Operating temperature: -5 to +55 C ousing: exposed Part No. Type Dimensions Colour eight profi-air humidity mm mm mm kg/pc. pc humidity sensor white,8 1 FRÄNKISCE profi-air Technical data 55

56 Data sheet profi-air replacement filter / filter Rectangular filter made of cardboard with a filter medium folded to V-shape. Part No. Type Dimensions Material eight polyester fibre polyester fibre polyester fibre kg/pc pc profi-air touch replacement filter/filter F5 F7 G4 mm mm mm Rectangular filter made of cardboard with a filter medium folded to V-shape. Part No. Type Dimensions Material eight polyester fibre kg/pc..14 pc. 1 profi-air filter for defroster heating G3 FRÄNKISCE profi-air Technical data mm 25 mm 35 mm 26

57 Data sheet profi-air siphon Ball siphon to discharge condensate in connection with the profi-air 25 / 4 touch ventilation. Due to its construction, odour is avoided even if the siphon has dried out. G6/4 G5/4 1 D O 1 2 profi-air siphon D O / 1 / 2 / 1 mm mm mm kg/pc. pc /4" 4 26 / 6 / / 115 PP.25 1 FRÄNKISCE profi-air Technical data 57

58 Notes 58 FRÄNKISCE profi-air Technical data

59 Notes FRÄNKISCE profi-air Technical data 59

60 Rooted in Königsberg globally successful! Our facilities in Europe: Königsberg, Germany (headquarters) Bückeburg, Germany Schwarzheide, Germany Okříšky, Czech Republic St.-eonards-on-Sea, Great Britain Moscow, Russia Yeles/Toledo, Spain Rebstein, Switzerland Torcy-le-Grand, France Ebersbach/Fils, Germany ermsdorf, Germany Mönchaltorf, Switzerland Milan, Italy Istanbul, Turkey Turda, Romania els, Austria Our facilities in Asia: Anting/Shanghai, China Pune, India Our facilities in Africa: Ben Arous, Tunisia Casablanca, Morocco Our facilities in North America and Mexico: Anderson, USA Guanajuato, Mexico FRÄNKISCE is an innovative, growth oriented, medium-sized family-owned enterprise and industry leader in the design, manufacturing and marketing of technically superior corrugated pipe systems for drainage, electrical, building technology and industrial applications. e currently employ about 2,7 people worldwide. Both our many years of experience and expertise in plastics processing, our consulting services and the large array of products are highly valued by our customers. FRÄNKISCE is a third generation family owned business that was established in 196 and is now run by Otto Kirchner. Today, we are globally represented with production facilities and sales offices. The proximity to our customers enables us to develop products and solutions that are perfectly tailored to our customers needs. Our action and business philosophy focus on our customers and their needs and requirements for our products. FRÄNKISCE Your partner for sophisticated and technologically advanced solutions. FRÄNKISCE RORERKE Gebr. Kirchner Gmb & Co. KG Königsberg/Germany Phone Fax info.gb_h@fraenkische.de E.2316/ Subject to change without notice Status December 214