Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Hydroponic Growing General Ventilation

Transcription

1

2

3 TT inline mixed type fans combine wide capabilities and excellent features of axial and centrifugal fans. The unique motor and impeller combination enables the TT fans to deliver high performance with minimum noise generation against high static pressure found in ventilation systems. The compact design of TT inline fans allows it to fit into small, restricted spaces. The fan can be installed in either a vertical or horizontal configuration. No tools required when removing the motor for inspection or maintenance. Designed for input and extract ventilation. Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Hydroponic Growing General Ventilation ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow from 73 CFM to 512 CFM Compatible with 4, 5, and 8 duct Suitable for 32 F to 104 F air stream temperatures Ball bearing external rotor motor and thermal protection ensures operation hours Silent and safe operation Compact overall dimensions Twospeed operating mode Speed can be adjusted using an optional controller Access to the engine and impeller without dismantling the ducts Made of durable ABS plastic Rated for residential and commercial use Five year warranty Caution! Connection to the electrical supply should be performed only by qualified specialist in compliance with the mounting instructions. AMCA International Licensed Products. Model Speed Duct CFM v Static Pressure (Ps) Ins. W.G RPM* Sones Watts* Amps* Max Dia. Ps Volts 0 0,125 0,20 0,25 0,5 0,75 1,00 1,25 1,5 TT 100 high , ,0 0, ,70 low ,11 29,5 0, ,54 TT 100 S high , ,9 0, ,47 low ,39 30,1 0, ,95 high ,61 TT ,0 0, ,49 low ,42 31,0 0, ,27 high ,20 TT ,0 1, ,71 low ,78 148,0 1, ,65 high ,35 TT ,8 0, ,167 low ,98 69,5 0, ,827 high ,48 TT ,4 352,9 2, ,665 low ,50 235,8 1, ,79 Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Ventilation Systems, JSC certifies that the TT series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

4 Pressure loss graphics determination TT 250 high speed low speed Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). Model TT 100 TT 100 S TT 125 TT 150 TT 200 TT 250 TT 315 Measurements Ø D Ø D1 B H L 3 3/4 3 3/4 4 13/16 5 3/4 7 13/16 9 3/4 12 3/16 5 1/2 7 11/16 5 1/2 7 11/16 8 1/4 10 1/ /16 6 9/16 8 3/4 6 9/16 8 3/4 9 7/ / /4 7 1/2 9 13/16 7 1/2 9 13/ / / / / /8 9 11/ /8 11 5/8 15 1/ /2 AMCA International NonLicensed Products. Model TT 250 Speed high low RPM Volts Max. Watts Max. Amps 1,68 1,11 CFM v Static Pressure (Ps) Ins. W.G 0 0,125 0,2 0,25 0,375 0,5 0,75 1, , Max. Ps 2,27 1,54 Duct Dia. 10 Sones 4,44 2,33 Vent hood Gravity louvered grille Ceiling grille Plastic duct Plastic elbow Air disc valve Hose clamps Flexible ducts

5 VK inline centrifugal fan features high powered turbine and delivers high airflow performance on high static pressure with low noise and low power usage. VK fan is ideal for single and multiple duct systems. Simple and reliable corrosion resistant fastening system makes either a vertical or horizontal installation possible. No tools required when removing the motor or impeller for inspection or maintenance. Suitable For: Whole house ventilation Ventilation of several premises Duct boosting Hydroponics growing General Ventilation extraction ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow from 168 CFM to 891 CFM Compatible with 4, 5, 6, 8, 10, and 12 3/8 duct Suitable for 32 F to 140 F air stream temperatures Ballbearing motor Five year warranty Automatic reset, thermal overload protection Balanced impeller on the motor shaft Silent and safe operation Compact overall dimensions Housing made of durable ABS plastic Reliable capacitor Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. AMCA International Licensed Products. Model VK 100 VK 125 VK 150 VK 200 VK 250 VK 315 RPM* Sones 6,91 7,14 7,16 8,10 10,20 11,50 Duct CFM v Static Pressure (Ps) Ins. W.G Dia. Watts* Amps* 0 0,125 0,20 0,25 0,375 0,5 0,75 1,00 1,25 1, ,4 105,8 114,0 112,7 142,0 292,5 270,5 0,96 0,96 0,96 1,18 2,43 2, Max Ps 2,18 2,05 1,86 2,20 3,06 2,66 Volts Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Ventilation Systems, JSC certifies that the VK series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

6 Pressure loss graphics determination Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). Model Ø d Ø D C A B VK 100 VK 125 VK 150 VK 200 VK 250 VK / /16 5 7/8 7 13/ / /8 9 13/ / / /8 13 3/8 15 3/4 9 1/ / /4 10 7/8 10 3/8 10 7/8 1 1/16 1 1/16 1 1/16 1 1/4 1 1/4 1 1/4 Vent hood Gravity louvered grille Ceiling grille Plastic duct Plastic elbow Air disc valve Hose clamps Flexible ducts

7 Inline centrifugal VKM fans are the perfect air movers for residential and light commercial applications. The asynchronous external rotor motor, ball bearings, and automatic reset thermal overload protection ensure long life of the fan. The fans housing is made of steel with zinc phosphate treatment and polymeric coating. Colors available are indicated in the color chart. VK inline fan fits into small, restricted spaces. Permits vertical or horizontal installation. White Beige Brown Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Dryer exhaust Hydroponic Growing General Ventilation ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Grey Brilliant blue Black Galvanized steel AMCA International Licensed Products. Model VKM 100 VKM 125 VKM 150 VKM 200 VKM 250 VKM 305 RPM* Sones 6,91 6,80 6,60 7,60 8,20 8, ,4 Features of VKM and VKMS Series: Airflow from 165 up to 985 CFM Compatible with 4, 5, 6, 8, 10, and 12 3/8 duct Suitable for 13 F to 140 F air stream temperatures Ball bearing external rotor motor with thermal protection Silent and safe operation Compact overall dimensions Speed can be adjusted using optional controller Five year warranty Mounting: The fans are supplied with fastening brackets for easy mounting Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. Duct CFM v Static Pressure (Ps) Ins. W.G Dia. Watts* Amps* 0 0,125 0,2 0,25 0,375 0,5 0,75 1,00 1,25 108,2 112,0 110,0 195,0 232,0 243,8 0,90 0,97 0,90 1,63 1,95 2, * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Model ,30 8, ,14 2, Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,375 0,5 0,75 1,00 1, ,5 2,5 Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). AMCA International NonLicensed Products. VKMS 200 VKMS 305 RPM Sones ,5 2, Max Ps 2,90 3,61 Max Ps 2,14 1,95 1,88 2,80 3,03 3,27 Volts Volts Ventilation Systems, JSC certifies that the VKM series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

8 Pressure loss graphics determination Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). Model Ø d Ø D C A B L E VKM 100 VKM 125 VKM 150 VKM 200 VKMS 200 VKM 250 VKM 305 VKMS / /16 5 7/8 7 7/8 7 7/8 9 13/ / / / / /8 15 7/8 8 1/16 8 1/ /16 9 7/16 9 7/ / /4 11 3/4 1 9/16 1 9/ / / / /4 13 3/4 13 3/4 16 1/8 16 1/8 1 9/16 1 9/16 1 9/16 1 9/16 1 9/16 Vent hood Gravity louvered grille Ceiling grille Plastic ducte Plastic elbow Air disc valve Hose clamps Flexible ducts

9 Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Dryer Exhaust Hydroponic Growing General Ventilation Inline centrifugal VKMz fans are perfect air movers for residential and light commercial applications. The asynchronous external rotor motor, ball bearings, and automatic reset thermal overload protection ensure long life of the fan. The fans housing is made of galvanized steel. VKMz inline fan fits into small, restricted spaces. The fan can be installed in either vertical or horizontal configuration. ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow from 165 CFM to 985 CFM Compatible with 4, 5, 6, 8, 10, and 12 3/8 duct Suitable for 13 F to 140 F air stream temperatures Ball bearing external rotor motor with thermal protection Silent and safe operation Compact overall dimensions Speed can be adjusted using optional controller Five year warranty Mounting: VKMz inline fans are supplied with fastening brackets for easy mounting Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. Model Ø d Ø D C A B VKMz 100 VKMz 125 VKMz 150 VKMz 200 VKMz 250 VKMz /8 4 15/16 5 7/8 7 7/8 9 13/ /4 9 1/2 9 1/2 13 1/8 13 1/ /16 8 1/16 7 9/16 7 1/16 9 1/4 8 5/ /16 15/16 15/16 7/8 1 1/8 2 3/16 15/16 15/16 13/16 1 1/8 1 3/8 Model VKMz 100 VKMz 125 VKMz 150 VKMz 200 VKMz 250 VKMz 315 RPM Sones 6,20 6,12 6,90 7,20 7,49 8,35 Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,375 0,5 0,75 1,0 1,25 1, , ,88 0,90 0,92 1,89 1,88 2, , Max Ps 2,07 1,89 1, ,97 2,83 Volts

10 Models are designed for easy electrical connection. Pressure loss graphics determination Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM) Vent hood Gravity louvered grill Ceiling grill Plastic duct Plastic elbow Air disc valve Hose clamp Flexible hose

11 Suitable For: Living Area Whole house Ventilation Medium and Large Size Facilities Dryer Exhaust General Ventilation VCN fans are specially designed for vertical exterior mounting and are perfect ventilation solution for medium and large facilities. The fans move a lot of air while maintaining quiet noise level inside the premises. The asynchronous external rotor motor, ball bearings, and automatic reset thermal overload protection ensure long life of the fan. The VCN fan s housing can be made of galvanized steel or steel with polymeric coating. Colors available are indicated in the color chart. Special anticorrosion protection ensures long life of the fans. Speed can be regulated with a variable speed control. White Beige Brown Grey Brilliant blue Black ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Galvanized steel Features: Airflow is 238 CFM to 306 CFM Compatible with 4, 5, 6, and 8 duct Suitable for 13 F to 140 F air stream temperatures Five year warranty Mounting: VCN fans are lightweight, compact, and simple to install. Just mount the fan to the wall and connect to the electrical supply Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. Model D L B H VCN 100 VCN 125 VCN 150 VCN / /16 5 7/8 7 7/8 13 3/4 13 3/4 15 3/4 15 3/4 10 1/4 10 1/ / /16 5 7/16 5 7/16 5 7/16 5 7/16 Model RPM Sones Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,375 0,5 0,75 1,0 1,25 1,5 Max Ps Volts VCN 100 VCN 125 VCN 150 VCN ,20 7,10 7,84 8, ,92 0,92 0,90 0, ,65 1,60 1,66 1,53

12 Pressure loss graphics determination Static Pressure (In. WG) Static Pressure (In. WG) Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM) Flow Rate (CFM) Flow Rate (CFM)

13 Suitable For: Whole House Ventilation Ventilation of Numerous Apartments Medium and Large Size Facilities (Offices, Restaurants, and Garages) VKP mini fans are specially designed for extract and input ventilation and are perfect air movement solution for areas with tight spaces. It provides small to medium airflow. From 100 cfm to 297 cfm at 0.2 static pressure. VKP series is suitable for a wide range of residential and light commercial applications. The fans offer a variety of choices of extract and input ventilation options and enables ducting from multiple sources. The external rotor motor on ball bearings and the backward curved, balanced impeller ensure high pressure in ventilation ducts, prevent vibration, and assure quiet operation. Speed can be regulated with a variable speed control. The fan s housing is made of steel with zinc phosphate treatment and polymeric coating. Removable cover allows easy maintenance of the fan. The series is characterized by low power consumption. ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow is 115 CFM to 340 CFM Compatible with 3 1/8, 4, 5, and 6 duct Suitable for 13 F to 140 F air stream temperatures Five year warranty AMCA International Licensed Products. Model VKP *2 VKP 125 VKP 150 RPM* Sones 4,1 4,1 4,2 Duct CFM v Static Pressure (Ps) Ins. W.G Dia. Watts* Amps* 0 0,125 0,2 0,25 0,5 0,75 1,00 1,25 5 / ,4 86, ,70 0,74 1, ,5 1, Max Ps 1,9 1,74 2,44 Volts Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Ventilation Systems, JSC certifies that the VKP series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. AMCA International NonLicensed Products. Model VKP 80 mini VKP 100 mini VKP 150/125*2 RPM Sones 3,9 3,9 4,2 Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,5 0,75 1,0 1,25 1,75 3 1/ ,53 0,53 1, Max Ps 1,94 1,97 2,28 Volts

14 Pressure loss graphics determination D H L D1 B Pic. 1 Inline dryer booster fan D Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). H Model D D1 L B H Picture VKP 80 mini VKP 100 mini VKP 125 VKP 150 VKP 125/100*2 VKP 150/125*2 3 1/8 3 15/ /16 5 7/8 4 15/16 5 7/8 3 1/8 3 15/ /16 5 7/8 3 15/ / /4 14 1/4 16 9/ / / / / / / / / /16 3 3/4 4 3/4 5 11/16 7 1/ /16 7 1/ L Pic. 2 Twin intake fan D1 B Ceiling grille Air disc valve Back valve Silencer Hose clamps Flexible ducts

15 VUT mini is ideal for ventilating: Whole houses, Apartments, and Commercial premises. Apartment ventilation; Whole house ventilation; Commercial premises ventilation (cafe, restaurants, swimming pools, shops, etc) The compact VUT mini heat recovery ventilator delivers a continuous supply of fresh air into premises while exhausts an equal amount of contaminated air. The heat transfer module of the VUT mini heat recovery ventilator transfers heat from the outgoing stream to the incoming stream while the airstreams never mix. The fresh air stream is automatically preheated or precooled depending on the season. VUT mini can recover from 50 to 75 percent of the heat in the outgoing airstream. It can dramatically reduce the energy needed to heat outdoor air to a comfortable indoor temperature. ANSI/UL 1812, 2nd Edition & CSA/C22.2 No 113M1984 Design and control: The case of VUT mini is made of aluminum zinc alloy (sheet metal) with internal sound and thermal insulation. Insulation is made of inflammable material mineral cotton with a thickness of. Two builtin, G4 cleaning level filters ensure filtration of exhaust and incoming air, keeping the air always fresh. The filters prevent pollen and dust from entering the house. It purifies the air by removing contaminants and particles. VUT mini heat recovery ventilator is supplied with backward curved impeller and builtin protective thermostat with automatic restart option. Sealed and permanently lubricated ballbearing motor guarantees long life and maintenance free operation. VUT mini features dynamically balanced motors and impellers. Aluminum heat recovery core designed for efficient crossflow ventilation. The summer insert is foreseen for those units in which heat exchangers are not used. Liquid condensation is collected in the drain pan. VUT mini features an automatic defrost mode which activates when the temperature of the incoming fresh air is below 23 0 F. After the ambient air has passed through the unit during a period of five minutes the supply motor restarts at the preset speed. The defrost cycle continues until the supply air stream rises above 23 0 F. VUT mini horisontal Model A B C D VUT mini vertical VUT 200 H mini VUT 200 V mini VUT 300 H mini VUT 300 V mini 23 5/8 23 5/8 23 5/8 23 5/ / / / / / / / / / / / /16 Installation: VUT mini features compact size, vertical and horizontal configurations. Ideal for applications where space is limited. The unit can be installed on the ground and it is suited to use in dropceiling. Can be placed in a closet, laundry room, workshop, top floor knee wall area, or even a garage. When installed, make sure that free access to drainage is provided. The latched front door provides easy access to the motor, filter, and drain pan.

16 Models of VUT mini models: VUT 200 mini compatible with 4 duct, Airflow 136 CFM at 0.0 static pressure. Horizontal (VUT 200 H mini) and vertical (VUT 200 V mini) configurations. VUT 300 mini compatible with 5 duct, 180 CFM at 0.0 static pressure. Horizontal (VUT 300 H mini) and vertical (VUT 300 V mini) configurations. Pressure loss graphics determination Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM) Model RPM Sones Duct Dia. Max Watts Max Amps CFM v Static Pressure (Ps) Ins. W.G 0 0,125 0,25 0,5 0,75 1,0 1,25 1,5 Max Ps Volts VUT 200 H mini VUT 200 V mini VUT 300 H mini VUT 300 V mini , ,31 1, ,6 1,62 Air dick valve Hose clamps Aluvent Flexible ducts

17

18 Model Ø D B C 100 C 125 C 150 C 200 C 250 C 315 C 100 Zn C 125 Zn C 150 Zn C 200 Zn C 250 Zn C 315 Zn 3 3/4 4 1/8 4 11/16 5 3/16 5 5/8 6 3/16 7 1/2 8 1/4 9 5/8 10 1/4 12 3/8 13 3/8 3/8 3/8 3/8 3/8 3/8 C stell with polymeric coating C Zn galvanized steel

19 KOM round back valve is especially designed to prevent backdraft. The spring loaded backdraft damper is manufactured of steel with polymeric coating or galvanized steel and contains rubber seal. KOM back valve is installed in ventilation systems and ventilation ducts. It also prevents the entry of birds and other wildlife. Model D L L1 KOM 100 KOM 125 KOM 150 KOM 200 KOM 250 KOM /8 4 7/8 5 7/8 7 13/ / /8 3 1/8 3 15/16 4 1/2 5 11/16 6 1/2 7 1/2 4 3/4 5 1/2 6 1/8 7 5/16 8 1/16 9 1/16 Diagramms of Pressure loss Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM)

20 It is made of multilayer Aluminum/Polyester laminate strip and corrosion resistant steel helix. It is widely used in professional HVAC systems. This item is very flexible and strong duct. This type can be fitted to round and oval flanges easily. An outstanding temperature and air pressure performance allows it to be used in wide range of applications. Performances Type 605 Inner duct size Film material Wall thickness Outer jacket material Insulation material Temperature range Velocity Positive pressure rating (WG) Negative pressure rating (WG) Standard length Standard colors Ø 312 Aluminum/Polyester laminate 0, F F 6000 FPM Feet Silver The items distinctive features are: Widely used in HVAC. Excellent flexibility. Self extinguishing.

21 This duct is made of polyvinylchloride (PVC) film and corrosion resistant steel helix. It is perfect solution for ventilation systems of the residential houses and commercial premises. Use this noninsulated and economically priced flexible connector in medium to low pressure A/C systems and in air venting and drying applications. They can be easily shaped to fit round or oval inlets and connects to fittings fast. Dense, airproof structure with the smooth surface conduces to less pressure loss at friction. Performances Type 660 Inner duct size Film material Wall thickness Outer jacket material Insulation material Temperature range Velocity Positive pressure rating (WG) Negative pressure rating (WG) Standard length Standard colors Ø 3 1/2 6 PVC 0, F F 4000 FPM 8 1/2 25 Feet White, Grey The items distinctive features are: Competitive quality and price. High flexibility. High compression value. Self extinguishing. Other colors and length are available on request. This type of ducts may have rectangular channel models as an option.

22 COMMERCIAL VENTILATION and HEAT RECOVERY VENTILATORS TT VK VKM VKMz VCN VKP VUT mini ACCESSORIES FOR COMMERCIAL VENTILATION Hose clamps KOM Series Polyvent Type 605 Polyvent Type

23